We should call iounmap to relase reg_base since it's not going
to be used any more if failing to init clk.
This was missing on the newly added rk3399 clock tree.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
It maybe due to a copy-paste error the error handing should be
cclk not clk when checking if the cpuclk registration succeeded.
Reported-by: Lin Huang <lin.huang@rock-chips.com>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This reverts commit 7a03fe6f48 ("clk: rockchip: reset init state
before mmc card initialization").
Though not totally obvious from the commit message nor from the source
code, that commit appears to be trying to reset the "_drv" MMC clocks to
90 degrees (note that the "_sample" MMC clocks have a shift of 0 so are
not touched).
The major problem here is that it doesn't properly reset things. The
phase is a two bit field and the commit only touches one of the two
bits. Thus the commit had the following affect:
- phase 0 => phase 90
- phase 90 => phase 90
- phase 180 => phase 270
- phase 270 => phase 270
Things get even weirder if you happen to have a bootloader that was
actually using delay elements (should be no reason to, but you never
know), since those are additional bits that weren't touched by the
original patch.
This is unlikely to be what we actually want. Checking on rk3288-veyron
devices, I can see that the bootloader leaves these clocks as:
- emmc: phase 180
- sdmmc: phase 90
- sdio0: phase 90
Thus on rk3288-veyron devices the commit we're reverting had the effect
of changing the eMMC clock to phase 270. This probably explains the
scattered reports I've heard of eMMC devices not working on some veyron
devices when using the upstream kernel.
The original commit was presumably made because previously the kernel
didn't touch the "_drv" phase at all and relied on whatever value was
there when the kernel started. If someone was using a bootloader that
touched the "_drv" phase then, indeed, we should have code in the kernel
to fix that. ...and also, to get ideal timings, we should also have the
kernel change the phase depending on the speed mode. In fact, that's
the subject of a recent patch I posted at
<https://patchwork.kernel.org/patch/9075141/>.
Ideally, we should take both the patch posted to dw_mmc and this
revert. Since those will likely go through different trees, here I
describe behavior with the combos:
1. Just this revert: likely will fix rk3288-veyron eMMC on some devices
+ other cases; might break someone with a strange bootloader that
sets the phase to 0 or one that uses delay elements (pretty
unpredicable what would happen in that case).
2. Just dw_mmc patch: fixes everyone. Effectly the dw_mmc patch will
totally override the broken patch and fix everything.
3. Both patches: fixes everyone. Once dw_mmc is initting properly then
any defaults from the clock code doesn't mattery.
Fixes: 7a03fe6f48 ("clk: rockchip: reset init state before mmc card initialization")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
[emmc and sdmmc still work on all current boards in mainline after this
revert, so they should take precedence over any out-of-tree board that
will hopefully again get fixed with the better upcoming dw_mmc change.]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There was a typo, swapping 'c' <--> 'g'.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We never want to kill the GIC.
Noticed when making other clock fixups, and seeing the newly-constructed
clock tree try to disable cpll, where we had this parent structure:
aclk_gic <------\
|--- aclk_gic_pre <-- cpll <-- pll_cpll
aclk_gic_noc <--/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The flags element of clk_init_data was never initialized for mmc-
phase-clocks resulting in the element containing a random value
and thus possibly enabling unwanted clock flags.
Fixes: 89bf26cbc1 ("clk: rockchip: Add support for the mmc clock phases using the framework")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Pull rockchip clk updates from Heiko Stuebner:
Another small rk3399 fixup as well as simplifications around
our handling of the General-Register-Files syscon.
* tag 'v4.7-rockchip-clk4' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: drop old_rate calculation on pll rate changes
clk: rockchip: simplify GRF handling in pll clocks
clk: rockchip: lookup General Register Files in rockchip_clk_init
clk: rockchip: fix the rk3399 sdmmc sample / drv name
Previously when everything happened in the set_rate callbacks itself we
needed the old_rate value for the possible rate rollback, so that made
it easy to also use it in the debug output.
Now with the param-handling being done in separate functions, reading and
recalculating the current pll rate only to use it in a debug message that
won't get displayed in regular cases anyway is quite a waste.
Therefore drop that value from the debug output. In the worst case that
previous rate will have been displayed on the rate change before.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
With the previous commit, the clock drivers now know at init time if the
GRF regmap is available. That means if it isn't available then, it also
won't become available later and we can therefore switch PLLs, that need
the GRF for the lock-status, to read-only mode - similar behaviour as the
aborting of rate changes we did before.
This saves some conditionals on every rate change and we can also drop
the rockchip_clk_get_grf function completely.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In the distant past syscons were initialized pretty late and weren't
available at the time the clock init ran. As the GRF is mainly needed
for PLL lock-status checking, we had this lazy init that tried to grab
the syscon on PLL rate changes and denied these changes if it was not
available.
These days syscons are available very early and recent addition to
rockchip clocks, like the PLL clk_init actually also rely on them
being available at that time, so there is no need to keep that lazy
init around, as it will also result in some more simplifications in
other parts of the clock-code.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rk3399 clock table had a simple typo in it, calling the SDMMC sample
and drive clocks by the wrong name. Fix this minor typo.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXIogdAAoJEPOmecmc0R2BmToH/0D0OdIU6WuAxlfhz0cluLm8
bzZ5hwA4ZVv73QorGFIXA2B6Aq/GKV+2HcoqSKT+gMspgpi1o4TdPcknIEpVDQ9r
vWUXW0VBN04dGNlk0J9N2XAPWokdkHRuFentf/EZATrAPWSwIMsri7QiF2hw3MiA
yWKQKmJki8IJC6JPtisj9HORKyqAeoyxOn8vPHA5TUOYAD4YIbcY3BJ7xApJ2W5i
ikJAVu4agjMrHRJ1ALyI0m6ZeczbtMvpigl6fvMTyt/27BhHou2AhrOqSr5Wg04t
Sh++L/wY0ZHIo5HFw9voAu6EVb6NachxKvnG8cCvgV8BGofsrArIdXmJFEwQWOk=
=yN9B
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rockchip-clk3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull rockchip clk updates from Heiko Stuebner:
A spelling fix and a bunch of rk3399 clock fixes.
* tag 'v4.7-rockchip-clk3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: fix the rk3399 cifout clock
clk: rockchip: drop unnecessary CLK_IGNORE_UNUSED flags from rk3399
clk: rockchip: add some frequencies on the rk3399 PLL table
clk: rockchip: assign more necessary rk3399 clock ids
clk: rockchip: export some necessary rk3399 clock ids
clk: rockchip: rename rga clock-id on rk3399
clk: rockchip: add general gpu soft-reset on rk3399
clk: rockchip: fix the gate bit for i2c4 and i2c8 on rk3399
clk: rockchip: fix of spelling mistake on unsuccessful in pll clock type
The cifout clock is incorrect due to the manual error, we need to
fix it.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We don't need to many clocks enable after startup, to reduce some
power consumption.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch add some necessary frequencies for the RK3399 clock.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The gate bits of the i2c4 and i2c8 are incorrect due to the manual
error, we need to fix them.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
fix spelling mistake, unsucessful -> unsuccessful
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
rk3399 header and also in the clock code itself.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXFzXaAAoJEPOmecmc0R2BfoIH/jzxzuOFb7oMIEjWA1Dlv6ev
I9l63Pi5+/BGXMXkuvBCpyVKRk9T7jyAkQbvMuoo6ELOmEtn2AX4BC7Pq+xok7Xz
WZZQY/+nkYaAjJ6GscLpqWtNlhwCY0Ms/1WOp9DwTwcDztiTJaa9iQf5CELEJMhg
RfANV2DIi9mNh+Nx4JIQi2e01tN2EXUsSNH8NVKTqfZKR/hvb9KO3qQWQzGdgqPr
jNaAuVIq1iOIV0fBD7X8WJwQ2JqmrP7UsvIAXYk46E53jSk5RvnrGIvFp23pu0Jc
0a677jCpx09en6LLPXQOwgtx687hChP5HT466BXo241daJkX4isDKAx430p7hGY=
=99uY
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull some checkpatch silencers from Heiko Stuebner:
Fix quite some checkpatch warnings in the newly added
rk3399 header and also in the clock code itself.
* tag 'v4.7-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: fix checkpatch warning in core code
clk: rockchip: drop unnecessary header comment
clk: rockchip: reign in some overly long lines in the rk3399 controller
clk: rockchip: fix checkpatch errors in rk3399 dt-binding header
We seem to have accumulated a bunch of checkpatch warnings, with mainly
overlong lines and two unnecessary allocation error messages.
Most were introduced with the recent multi-controller-support but some
were quite a bit older.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The internal clk header did contain a comment indicating that some of the
defined registers were shared over multiple clock controller variants.
In recent times, it was simply extended all the time and stopped providing
any meaningful information, so drop it and it's overlong line.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We allow overlong lines in the array portitions describing the clock
trees to ease readability by having each element always at the same
position. But the rest of the code should honor the 80 char limit.
Fix the newly added rk3399 clock code to respect that.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Main change is probably the added support for the new rk3399 soc
and necessary infrastructure changes surrounding it.
The biggest chunk is probably that clock code is now able to
handle multiple clock providers in one system, as the rk3399
has two of those. A general one and another smaller one in a
separate power domain. The rk3399 also uses another new pll type.
Thankfully it just fits nicely into our current structure.
It also needs some parts like the cpuclk mux parameters to be
a bit more flexible and an new fractional divider subtype without
gate.
Apart from this big change we have some more fixes and removal
of forgotten variables.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXDHdWAAoJEPOmecmc0R2BrSAIAIf3g2D84lSEYPDfjLCPHKWQ
vdmBG/J53+OqFfk0IgYFPcgFfXsgXX0iv34WgtxDOQ1uF+uPDC1KQFlyNrg3E8Mu
7yUzHewphWumgtun/niThjhKTH+fRAZV4koo35KndXpsOXAy87uW+PZc+0f33ocD
FzF8mu3eQGsXNkZ3NM/BlLN38gfQVFLiiBNxg/yPmIGqI4VcWJPVUWr51nOURL78
5NozCjr1giUXPazat0IzsvGdO9szben7al2MixufnpkojjQkB+C8r2lxVXPSC7xH
EWHPj8WVS0eLYLPW6T3t27zvLNRuORzv5y7cHS8TMc4en1qFS5NJ56ruRv7SzNQ=
=kC1q
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull rockchip clk updates from Heiko Stuebner:
This is first big chunk of Rockchip clock-related changes for 4.7.
Main change is probably the added support for the new rk3399 soc
and necessary infrastructure changes surrounding it.
The biggest chunk is probably that clock code is now able to
handle multiple clock providers in one system, as the rk3399
has two of those. A general one and another smaller one in a
separate power domain. The rk3399 also uses another new pll type.
Thankfully it just fits nicely into our current structure.
It also needs some parts like the cpuclk mux parameters to be
a bit more flexible and an new fractional divider subtype without
gate.
Apart from this big change we have some more fixes and removal
of forgotten variables.
* tag 'v4.7-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: add clock controller for the RK3399
dt-bindings: add bindings for rk3399 clock controller
clk: rockchip: add dt-binding header for rk3399
clk: rockchip: release io resource when failing to init clk
clk: rockchip: remove redundant checking of device_node
clk: rockchip: fix warning reported by kernel-doc
clk: rockchip: remove mux_core_reg from rockchip_cpuclk_reg_data
clk: rockchip: add new pll-type for rk3399 and similar socs
clk: rockchip: Add support for multiple clock providers
clk: rockchip: allow varying mux parameters for cpuclk pll-sources
clk: rockchip: add a COMPOSITE_FRACMUX_NOGATE type
The rockchip_softrst_ops structure is never modified. Make it const.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add the clock tree definition for the new RK3399 SoC.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We should call iounmap to relase reg_base since it's not going
to be used any more if failing to init clk.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
rockchip_clk_of_add_provider is used by sub-clk driver which
already call of_iomap before calling it. If device_node does
not exist, of_iomap returns NULL which will fail to init the
sub-clk driver. So really it's redundant.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
./scripts/kernel-doc -man -v drivers/clk/rockchip/clk.h > /dev/null
drivers/clk/rockchip/clk.h:133: warning: missing initial short
description on line:
* struct rockchip_clk_provider: information about clock provider
drivers/clk/rockchip/clk.h:133: info: Scanning doc for struct
drivers/clk/rockchip/clk.h:164: warning: missing initial short
description on line:
* struct rockchip_pll_clock: information about pll clock
drivers/clk/rockchip/clk.h:164: info: Scanning doc for struct
drivers/clk/rockchip/clk.h:194: warning: No description found for
parameter 'parent_names'
drivers/clk/rockchip/clk.h:194: warning: No description found for
parameter 'num_parents'
drivers/clk/rockchip/clk.h:194: warning: Excess struct/union/enum/typedef
member 'parent_name' description in 'rockchip_pll_clock'
drivers/clk/rockchip/clk.h:235: warning: missing initial short
description on line:
* struct rockchip_cpuclk_reg_data: describes register offsets and
masks of the cpuclock
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
mux_core_reg isn't been used anywhere, let's remove it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rk3399's pll and clock are similar with rk3036's, it different
with base on the rk3066(rk3188, rk3288, rk3368 use it), there are
different adjust foctors and control registers, so these should be
independent and separate from the series of rk3066s.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There are need to support Multi-CRUs probability in future, but
it is not supported on the current Rockchip Clock Framework.
Therefore, this patch add support a provider as the parameter
handler when we call the clock register functions for per CRU.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Thers are only two parent PLLs that APLL and GPLL for core on the
previous SoCs (RK3066/RK3188/RK3288/RK3368). Hence, we set fixed
GPLL as alternate parent when core is switching freq.
Since RK3399 big.LITTLE architecture, we need to select and adapt
more PLLs (ALPLL/ABPLL/DPLL/GPLL) sources.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Because there are some frac clock mux nodes don't have a gate node on
the RK3399.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
new device support in terms of LoC, but there has been some cleanup
in the core as well as the usual minor clk additions to various
drivers.
Core:
- parent tracking has been simplified
- CLK_IS_ROOT is now a no-op flag, cleaning up drivers has started
- of_clk_init() doesn't consider disabled DT nodes anymore
- clk_unregister() had an error path bug squashed
- of_clk_get_parent_count() has been fixed to only return unsigned ints
- HAVE_MACH_CLKDEV is removed now that the last arch user (ARM) is gone
New Drivers:
- NXP LPC18xx creg
- QCOM IPQ4019 GCC
- TI dm814x ADPLL
- i.MX6QP
Updates:
- Cyngus audio clks found on Broadcom iProc devices
- Non-critical fixes for BCM2385 PLLs
- Samsung exynos5433 updates for clk id errors, HDMI support,
suspend/resume simplifications
- USB, CAN, LVDS, and FCP clks on shmobile devices
- sunxi got support for more clks on new SoCs and went through a minor
refactoring/rewrite to use a simpler factor clk construct
- rockchip added some more clk ids and added suport for fraction dividers
- QCOM GDSCs in msm8996
- A new devm helper to make adding custom actions simpler (acked by Greg)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=bZFY
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The clk changes for this release cycle are mostly dominated by new
device support in terms of LoC, but there has been some cleanup in the
core as well as the usual minor clk additions to various drivers.
Core:
- parent tracking has been simplified
- CLK_IS_ROOT is now a no-op flag, cleaning up drivers has started
- of_clk_init() doesn't consider disabled DT nodes anymore
- clk_unregister() had an error path bug squashed
- of_clk_get_parent_count() has been fixed to only return unsigned ints
- HAVE_MACH_CLKDEV is removed now that the last arch user (ARM) is gone
New Drivers:
- NXP LPC18xx creg
- QCOM IPQ4019 GCC
- TI dm814x ADPLL
- i.MX6QP
Updates:
- Cyngus audio clks found on Broadcom iProc devices
- Non-critical fixes for BCM2385 PLLs
- Samsung exynos5433 updates for clk id errors, HDMI support,
suspend/resume simplifications
- USB, CAN, LVDS, and FCP clks on shmobile devices
- sunxi got support for more clks on new SoCs and went through a
minor refactoring/rewrite to use a simpler factor clk construct
- rockchip added some more clk ids and added suport for fraction
dividers
- QCOM GDSCs in msm8996
- A new devm helper to make adding custom actions simpler (acked by Greg)"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (197 commits)
clk: bcm2835: fix check of error code returned by devm_ioremap_resource()
clk: renesas: div6: use RENESAS for #define
clk: renesas: Rename header file renesas.h
clk: max77{686,802}: Remove CLK_IS_ROOT
clk: versatile: Remove CLK_IS_ROOT
clk: sunxi: Remove use of variable length array
clk: fixed-rate: Remove CLK_IS_ROOT
clk: qcom: Remove CLK_IS_ROOT
doc: dt: add documentation for lpc1850-creg-clk driver
clk: add lpc18xx creg clk driver
clk: lpc32xx: fix compilation warning
clk: xgene: Add missing parenthesis when clearing divider value
clk: mb86s7x: Remove CLK_IS_ROOT
clk: x86: Remove clkdev.h and clk.h includes
clk: x86: Remove CLK_IS_ROOT
clk: mvebu: Remove CLK_IS_ROOT
clk: renesas: move drivers to renesas directory
clk: si5{14,351,70}: Remove CLK_IS_ROOT
clk: scpi: Remove CLK_IS_ROOT
clk: s2mps11: Remove CLK_IS_ROOT
...
Here's our branch of ARM64 contents for this merge window, now
containing all ARM64 changes other than device tree files.
- Various new platforms get added
- Allwinner A64 SoC
- Annapurna Labs Alpine SoCs
- Broadcom Vulcan
- Marvell Armada 3700 SoCs
- Amlogic S905
- Various defconfig changes to enable platform specific drivers
This branch includes the clk git tree to resolve a build-time
dependency.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fO+Q
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes from Arnd Bergmann:
"Here's our branch of ARM64 contents for this merge window, now
containing all ARM64 changes other than device tree files.
- Various new platforms get added:
* Allwinner A64 SoC
* Annapurna Labs Alpine SoCs
* Broadcom Vulcan
* Marvell Armada 3700 SoCs
* Amlogic S905
- Various defconfig changes to enable platform specific drivers
This branch includes the clk git tree to resolve a build-time
dependency"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
arm64: defconfig: Increase MMC_BLOCK_MINORS to 16
arm64: defconfig: Add Qualcomm sdhci and restart functionality
ARM64: Enable Amlogic Meson GXBaby platform
arm64: defconfig: Enable Samsung MFD and related configs
arm64: alpine: select the Alpine MSI controller driver
arm64: defconfig: enable the Alpine family
arm64: add Alpine SoC family
arm64: defconfig: Enable exynos thermal config
arm64: add defconfig options for Allwinner SoCs
arm64: defconfig: Enable DesignWare APB GPIO controller
arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support
arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS
clk: samsung: Don't build ARMv8 clock drivers on ARMv7
MAINTAINERS: Add entry for Broadcom Vulcan SoC
arm64: cputype info for Broadcom Vulcan
arm64: Broadcom Vulcan support
arm64: defconfig: Add Broadcom Vulcan to defconfig
arm64: update ARCH_MVEBU for Marvell Armada 7K/8K support
Documentation: arm: add Marvell Armada 7K and 8K families
Documentation: arm: add link to Armada 38x Functional Spec
...
The emac needs constant and very specific rate but the possible PLL-sources
are very limited, so we expect the PLL source to be set manually on per
board and don't want it to get changed in an automatic way later.
So add the necessary clock-id and disable reparenting on set_rate calls.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Associate the new clock id the clock.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
fixes for missing error-handling in mmc-phase, inverters and cpu-clocks
and some more clock-ids.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJW2N6oAAoJEPOmecmc0R2BUgQH/R+inbboTw31Gsa5KOEeoGDb
BwET4Cw5rD2ns1rOGZtQ3nFGv5I7fKq1ChMuQVMAMbv/60rEjGm3ACOWbxrTg2+P
o7FVSGoE+fOPZKfxbPGC3c1rSDnlAwwHhZWxXKvTrybAKdhoiHhzbx5ycc5r57vw
uVzLWJL3PgkOCnc4lbE8Dtr6DYEaIA0w7sZ0oplXhMxm49YBzlJi1zWcx400Xb8D
ourvqbD2aWGSTfjWcQlxSHCHSVKZDfZRfJI4c16XAYJ1SXtWsAUqTTpDAgFgrFI/
o9v+V4JMKGCYfqb1P+h8dMvc/8FJgvwdRY2OtWAWVlrYZpZ9cp+nDeLP2TEv554=
=ekax
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull second batch of rockchip clk updates from Heiko Stuebner:
Inclusion of the rk3368 fractional dividers into our handling scheme,
fixes for missing error-handling in mmc-phase, inverters and cpu-clocks
and some more clock-ids.
* tag 'v4.6-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: include downstream muxes into fractional dividers on rk3368
clk: rockchip: set the clock ids for RK3228 HDMI
clk: rockchip: set the clock ids for RK3228 VOP
clk: rockchip: add the tsadc clocks found on rk3228 SoCs
clk: rockchip: add the new clock ids for RK3228 HDMI
clk: rockchip: add the new clock ids for RK3228 VOP
clk: rockchip: add id of the tsadc clock found on rk3228 SoCs
clk: rockchip: fix coding style for clk-cpu.c
clk: rockchip: don't return NULL when registering mmc branch fails
clk: rockchip: don't return NULL when registering inverter fails
clk: rockchip: check grf when waiting pll lock
clk: rockchip: disable alt_parent clk in err cases when registering cpuclk
During the initial conversion to the newly introduced combined fractional
dividers+muxes the rk3368 clocks were left out, so convert them now.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds the needed clocks for rk3228 tsadc.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fix the issue reported by checkpatch:
ERROR: space prohibited before that ',' (ctx:WxW)
+ writel(clksel->val , cpuclk->reg_base + clksel->reg);
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Avoid return NULL if rockchip_clk_register_mmc fails, otherwise
rockchip_clk_register_branches print "unknown clock type". The acutal
case is that it's a known clock type but we fail to regiser it, which
may makes user confuse the reason of failure.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Avoid return NULL if rockchip_clk_register_inverter fails, otherwise
rockchip_clk_register_branches print "unknown clock type". The acutal
case is that it's a known clock type but we fail to regiser it, which
may makes user confuse the reason of failure.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
rockchip_clk_get_grf pass on return value from
syscon_regmap_lookup_by_phandle, so we check grf to
make sure whether to do the following things or not.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
to be able to also declare factor clocks in their correct
place in the clock tree instead of having to register factor
clocks in the init callback separately. And as always some more
clock-ids and non-regression fixes for mistakes introduced in
past kernel releases.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJWuwINAAoJEPOmecmc0R2BUgMIAKmXROUpwuap5hhDv+XapDyc
drU3DmOwFQeIiaODZQVFlx8CcXUN6h/8cPZnc4Qd/ChO73TxfvtWY3S7n0n3F/EH
RIceQ30OHTUEYh/k449Sf/sTEOW68h4TdhaVrw2gJYKsJ5fg2ih5o6naWnWWE6Ig
WUh+xeeYdG6L8hCLcUA8sujE3EpG5kJelnWiMBedx6CbuTSSfJcB9tTkg1eOa/R+
jyBgYJJSuSEwG4mJijV61tanZw1FhWu+i4dEAGHkWgimuGekO4CEnRRczZ1hw7x2
O/cBfpLW4D2iGMlrvyUhcB/pe/TmRdz4SfzDSTwLPtpCfqEiZRmxH4mwW4s8hv4=
=igdK
-----END PGP SIGNATURE-----
Merge tag 'v4.6-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Introduction of a factor type and a variant containing a gate
to be able to also declare factor clocks in their correct
place in the clock tree instead of having to register factor
clocks in the init callback separately. And as always some more
clock-ids and non-regression fixes for mistakes introduced in
past kernel releases.
Clean up the init code and move the creation of factor clocks to the
appropriate positions coming from the clock architecture diagrams.
This also unifies the artificial separation of the hclk_vcodec etc clocks
again.
We do keep the separate definition of some watchdog and usb480m pseudo
clocks for now, as they're not real factor clocks from the clock-tree
but placeholders for fixes to come (usb480m gets supplied by the
missing driver for the new usbphy type and the watchdog-gate is sitting
somewhere else together which we cannot model currently).
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add a clock type for fixed factor clocks. This allows us to define fixed
factor clocks where they appear in the clock hierarchy instead of in the
init function.
The additional factor_gate type, finally allows us to model some last
parts of the clock tree correctly.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Shawn Lin
Xing Zheng
Douglas Anderson
Brian Norris
Heiko Stuebner
Stephen Boyd
Colin Ian King
Philipp Zabel
Linus Torvalds
Elaine Zhang
Yakir Yang
Caesar Wang
Michael Turquette