Граф коммитов

7241 Коммитов

Автор SHA1 Сообщение Дата
Wanpeng Li e25839f679 mm/slab: Sharing s_next and s_stop between slab and slub
This patch shares s_next and s_stop between slab and slub.

Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-07-07 18:37:47 +03:00
Wanpeng Li 0fa8103be4 mm/slab: Fix drain freelist excessively
The drain_freelist is called to drain slabs_free lists for cache reap,
cache shrink, memory hotplug callback etc. The tofree parameter should
be the number of slab to free instead of the number of slab objects to
free.

This patch fix the callers that pass # of objects. Make sure they pass #
of slabs.

Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-07-07 18:37:46 +03:00
Linus Torvalds 80cc38b163 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "The usual stuff from trivial tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  treewide: relase -> release
  Documentation/cgroups/memory.txt: fix stat file documentation
  sysctl/net.txt: delete reference to obsolete 2.4.x kernel
  spinlock_api_smp.h: fix preprocessor comments
  treewide: Fix typo in printk
  doc: device tree: clarify stuff in usage-model.txt.
  open firmware: "/aliasas" -> "/aliases"
  md: bcache: Fixed a typo with the word 'arithmetic'
  irq/generic-chip: fix a few kernel-doc entries
  frv: Convert use of typedef ctl_table to struct ctl_table
  sgi: xpc: Convert use of typedef ctl_table to struct ctl_table
  doc: clk: Fix incorrect wording
  Documentation/arm/IXP4xx fix a typo
  Documentation/networking/ieee802154 fix a typo
  Documentation/DocBook/media/v4l fix a typo
  Documentation/video4linux/si476x.txt fix a typo
  Documentation/virtual/kvm/api.txt fix a typo
  Documentation/early-userspace/README fix a typo
  Documentation/video4linux/soc-camera.txt fix a typo
  lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment
  ...
2013-07-04 11:40:58 -07:00
Linus Torvalds 65b97fb730 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Ben Herrenschmidt:
 "This is the powerpc changes for the 3.11 merge window.  In addition to
  the usual bug fixes and small updates, the main highlights are:

   - Support for transparent huge pages by Aneesh Kumar for 64-bit
     server processors.  This allows the use of 16M pages as transparent
     huge pages on kernels compiled with a 64K base page size.

   - Base VFIO support for KVM on power by Alexey Kardashevskiy

   - Wiring up of our nvram to the pstore infrastructure, including
     putting compressed oopses in there by Aruna Balakrishnaiah

   - Move, rework and improve our "EEH" (basically PCI error handling
     and recovery) infrastructure.  It is no longer specific to pseries
     but is now usable by the new "powernv" platform as well (no
     hypervisor) by Gavin Shan.

   - I fixed some bugs in our math-emu instruction decoding and made it
     usable to emulate some optional FP instructions on processors with
     hard FP that lack them (such as fsqrt on Freescale embedded
     processors).

   - Support for Power8 "Event Based Branch" facility by Michael
     Ellerman.  This facility allows what is basically "userspace
     interrupts" for performance monitor events.

   - A bunch of Transactional Memory vs.  Signals bug fixes and HW
     breakpoint/watchpoint fixes by Michael Neuling.

  And more ...  I appologize in advance if I've failed to highlight
  something that somebody deemed worth it."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (156 commits)
  pstore: Add hsize argument in write_buf call of pstore_ftrace_call
  powerpc/fsl: add MPIC timer wakeup support
  powerpc/mpic: create mpic subsystem object
  powerpc/mpic: add global timer support
  powerpc/mpic: add irq_set_wake support
  powerpc/85xx: enable coreint for all the 64bit boards
  powerpc/8xx: Erroneous double irq_eoi() on CPM IRQ in MPC8xx
  powerpc/fsl: Enable CONFIG_E1000E in mpc85xx_smp_defconfig
  powerpc/mpic: Add get_version API both for internal and external use
  powerpc: Handle both new style and old style reserve maps
  powerpc/hw_brk: Fix off by one error when validating DAWR region end
  powerpc/pseries: Support compression of oops text via pstore
  powerpc/pseries: Re-organise the oops compression code
  pstore: Pass header size in the pstore write callback
  powerpc/powernv: Fix iommu initialization again
  powerpc/pseries: Inform the hypervisor we are using EBB regs
  powerpc/perf: Add power8 EBB support
  powerpc/perf: Core EBB support for 64-bit book3s
  powerpc/perf: Drop MMCRA from thread_struct
  powerpc/perf: Don't enable if we have zero events
  ...
2013-07-04 10:29:23 -07:00
Linus Torvalds 7f0ef0267e Merge branch 'akpm' (updates from Andrew Morton)
Merge first patch-bomb from Andrew Morton:
 - various misc bits
 - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been
   distracted.  There has been quite a bit of activity.
 - About half the MM queue
 - Some backlight bits
 - Various lib/ updates
 - checkpatch updates
 - zillions more little rtc patches
 - ptrace
 - signals
 - exec
 - procfs
 - rapidio
 - nbd
 - aoe
 - pps
 - memstick
 - tools/testing/selftests updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits)
  tools/testing/selftests: don't assume the x bit is set on scripts
  selftests: add .gitignore for kcmp
  selftests: fix clean target in kcmp Makefile
  selftests: add .gitignore for vm
  selftests: add hugetlbfstest
  self-test: fix make clean
  selftests: exit 1 on failure
  kernel/resource.c: remove the unneeded assignment in function __find_resource
  aio: fix wrong comment in aio_complete()
  drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode
  drivers/memstick/host/r592.c: convert to module_pci_driver
  drivers/memstick/host/jmb38x_ms: convert to module_pci_driver
  pps-gpio: add device-tree binding and support
  drivers/pps/clients/pps-gpio.c: convert to module_platform_driver
  drivers/pps/clients/pps-gpio.c: convert to devm_* helpers
  drivers/parport/share.c: use kzalloc
  Documentation/accounting/getdelays.c: avoid strncpy in accounting tool
  aoe: update internal version number to v83
  aoe: update copyright date
  aoe: perform I/O completions in parallel
  ...
2013-07-03 17:12:13 -07:00
Kees Cook 02aa2a3763 drivers: avoid format string in dev_set_name
Calling dev_set_name with a single paramter causes it to be handled as a
format string.  Many callers are passing potentially dynamic string
content, so use "%s" in those cases to avoid any potential accidents,
including wrappers like device_create*() and bdi_register().

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:41 -07:00
Johannes Weiner 519ebea3bf mm: memcontrol: factor out reclaim iterator loading and updating
mem_cgroup_iter() is too hard to follow.  Factor out the lockless reclaim
iterator loading and updating so it's easier to follow the big picture.

Also document the iterator invalidation mechanism a bit more extensively.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:40 -07:00
Zhang Yanfei 0f2d4a8e27 mm, vmalloc: use clamp() to simplify code
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:40 -07:00
Zhang Yanfei f6d480059b mm, vmalloc: remove insert_vmalloc_vm()
Now this function is nowhere used, we can remove it directly.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:40 -07:00
Zhang Yanfei 3645cb4a4e mm, vmalloc: call setup_vmalloc_vm() instead of insert_vmalloc_vm()
Here we pass flags with only VM_ALLOC bit set, it is unnecessary to call
clear_vm_unlist to clear VM_UNLIST bit.  So use setup_vmalloc_vm instead
of insert_vmalloc_vm.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:40 -07:00
Zhang Yanfei d82b1d8576 mm, vmalloc: only call setup_vmalloc_vm() only in __get_vm_area_node()
Now for insert_vmalloc_vm, it only calls the two functions:

 - setup_vmalloc_vm: fill vm_struct and vmap_area instances
 - clear_vm_unlist: clear VM_UNLIST bit in vm_struct->flags

So in __get_vm_area_node(), if VM_UNLIST bit unset in flags, that is the
else branch here, we don't need to clear VM_UNLIST bit for vm->flags since
this bit is obviously not set.  That is to say, we could only call
setup_vmalloc_vm instead of insert_vmalloc_vm here.  And then we could
even remove the if test here.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:40 -07:00
Cody P Schafer 55878e88c5 sparsemem: add BUILD_BUG_ON when sizeof mem_section is non-power-of-2
Instead of leaving a hidden trap for the next person who comes along and
wants to add something to mem_section, add a big fat warning about it
needing to be a power-of-2, and insert a BUILD_BUG_ON() in sparse_init()
to catch mistakes.

Right now non-power-of-2 mem_sections cause a number of WARNs at boot
(which don't clearly point to the size of mem_section as an issue), but
the system limps on (temporarily, at least).

This is based upon Dave Hansen's earlier RFC where he ran into the same
issue:
	"sparsemem: fix boot when SECTIONS_PER_ROOT is not power-of-2"
	http://lkml.indiana.edu/hypermail/linux/kernel/1205.2/03077.html

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:40 -07:00
Jiang Liu e1280be0d8 mm: kill free_all_bootmem_node()
Now nobody makes use of free_all_bootmem_node(), kill it.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Yinghai Lu <yinghai@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:39 -07:00
Jiang Liu 1895418189 mm: kill global variable num_physpages
Now all references to num_physpages have been removed, so kill it.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:38 -07:00
Jiang Liu e461d627d5 mm/hotplug: prepare for removing num_physpages
Prepare for removing num_physpages.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:35 -07:00
Jiang Liu 7ee3d4e8cd mm: introduce helper function mem_init_print_info() to simplify mem_init()
Introduce helper function mem_init_print_info() to simplify mem_init()
across different architectures, which also unifies the format and
information printed.

Function mem_init_print_info() calculates memory statistics information
without walking each page, so it should be a little faster on some
architectures.

Also introduce another helper get_num_physpages() to kill the global
variable num_physpages.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:35 -07:00
Vineet Gupta e6c495a96c mm: fix the TLB range flushed when __tlb_remove_page() runs out of slots
zap_pte_range loops from @addr to @end.  In the middle, if it runs out of
batching slots, TLB entries needs to be flushed for @start to @interim,
NOT @interim to @end.

Since ARC port doesn't use page free batching I can't test it myself but
this seems like the right thing to do.

Observed this when working on a fix for the issue at thread:
http://www.spinics.net/lists/linux-arch/msg21736.html

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:34 -07:00
Jiang Liu cdd91a7704 mm: report available pages as "MemTotal" for each NUMA node
As reported by https://bugzilla.kernel.org/show_bug.cgi?id=53501,
"MemTotal" from /proc/meminfo means memory pages managed by the buddy
system (managed_pages), but "MemTotal" from /sys/.../node/nodex/meminfo
means physical pages present (present_pages) within the NUMA node.
There's a difference between managed_pages and present_pages due to
bootmem allocator and reserved pages.

And Documentation/filesystems/proc.txt says
    MemTotal: Total usable ram (i.e. physical ram minus a few reserved
              bits and the kernel binary code)

So change /sys/.../node/nodex/meminfo to report available pages within
the node as "MemTotal".

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Reported-by: <sworddragon2@aol.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:34 -07:00
Jiang Liu 0c98853473 mm: concentrate modification of totalram_pages into the mm core
Concentrate code to modify totalram_pages into the mm core, so the arch
memory initialized code doesn't need to take care of it.  With these
changes applied, only following functions from mm core modify global
variable totalram_pages: free_bootmem_late(), free_all_bootmem(),
free_all_bootmem_node(), adjust_managed_page_count().

With this patch applied, it will be much more easier for us to keep
totalram_pages and zone->managed_pages in consistence.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:33 -07:00
Jiang Liu 3dcc0571cd mm: correctly update zone->managed_pages
Enhance adjust_managed_page_count() to adjust totalhigh_pages for
highmem pages.  And change code which directly adjusts totalram_pages to
use adjust_managed_page_count() because it adjusts totalram_pages,
totalhigh_pages and zone->managed_pages altogether in a safe way.

Remove inc_totalhigh_pages() and dec_totalhigh_pages() from xen/balloon
driver bacause adjust_managed_page_count() has already adjusted
totalhigh_pages.

This patch also fixes two bugs:

1) enhances virtio_balloon driver to adjust totalhigh_pages when
   reserve/unreserve pages.
2) enhance memory_hotplug.c to adjust totalhigh_pages when hot-removing
   memory.

We still need to deal with modifications of totalram_pages in file
arch/powerpc/platforms/pseries/cmm.c, but need help from PPC experts.

[akpm@linux-foundation.org: remove ifdef, per Wanpeng Li, virtio_balloon.c cleanup, per Sergei]
[akpm@linux-foundation.org: export adjust_managed_page_count() to modules, for drivers/virtio/virtio_balloon.c]
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <sworddragon2@aol.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:33 -07:00
Jiang Liu 170a5a7eb2 mm: make __free_pages_bootmem() only available at boot time
In order to simpilify management of totalram_pages and
zone->managed_pages, make __free_pages_bootmem() only available at boot
time.  With this change applied, __free_pages_bootmem() will only be
used by bootmem.c and nobootmem.c at boot time, so mark it as __init.
Other callers of __free_pages_bootmem() have been converted to use
free_reserved_page(), which handles totalram_pages and
zone->managed_pages in a safer way.

This patch also fix a bug in free_pagetable() for x86_64, which should
increase zone->managed_pages instead of zone->present_pages when freeing
reserved pages.

And now we have managed_pages_count_lock to protect totalram_pages and
zone->managed_pages, so remove the redundant ppb_lock lock in
put_page_bootmem().  This greatly simplifies the locking rules.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:33 -07:00
Jiang Liu c3d5f5f0c2 mm: use a dedicated lock to protect totalram_pages and zone->managed_pages
Currently lock_memory_hotplug()/unlock_memory_hotplug() are used to
protect totalram_pages and zone->managed_pages.  Other than the memory
hotplug driver, totalram_pages and zone->managed_pages may also be
modified at runtime by other drivers, such as Xen balloon,
virtio_balloon etc.  For those cases, memory hotplug lock is a little
too heavy, so introduce a dedicated lock to protect totalram_pages and
zone->managed_pages.

Now we have a simplified locking rules totalram_pages and
zone->managed_pages as:

1) no locking for read accesses because they are unsigned long.
2) no locking for write accesses at boot time in single-threaded context.
3) serialize write accesses at runtime by acquiring the dedicated
   managed_page_count_lock.

Also adjust zone->managed_pages when freeing reserved pages into the
buddy system, to keep totalram_pages and zone->managed_pages in
consistence.

[akpm@linux-foundation.org: don't export adjust_managed_page_count to modules (for now)]
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:33 -07:00
Jiang Liu 7b4b2a0d6c mm: accurately calculate zone->managed_pages for highmem zones
Commit "mm: introduce new field 'managed_pages' to struct zone" assumes
that all highmem pages will be freed into the buddy system by function
mem_init().  But that's not always true, some architectures may reserve
some highmem pages during boot.  For example PPC may allocate highmem
pages for giagant HugeTLB pages, and several architectures have code to
check PageReserved flag to exclude highmem pages allocated during boot
when freeing highmem pages into the buddy system.

So treat highmem pages in the same way as normal pages, that is to:
1) reset zone->managed_pages to zero in mem_init().
2) recalculate managed_pages when freeing pages into the buddy system.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:33 -07:00
Jiang Liu 4f9f47745e mm: use managed_pages to calculate default zonelist order
Use zone->managed_pages instead of zone->present_pages to calculate
default zonelist order because managed_pages means allocatable pages.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:33 -07:00
Jiang Liu 834405c3b6 mm: fix some trivial typos in comments
Fix some trivial typos in comments.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:33 -07:00
Jiang Liu dbe67df4ba mm: enhance free_reserved_area() to support poisoning memory with zero
Address more review comments from last round of code review.
1) Enhance free_reserved_area() to support poisoning freed memory with
   pattern '0'. This could be used to get rid of poison_init_mem()
   on ARM64.
2) A previous patch has disabled memory poison for initmem on s390
   by mistake, so restore to the original behavior.
3) Remove redundant PAGE_ALIGN() when calling free_reserved_area().

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:32 -07:00
Jiang Liu 11199692d8 mm: change signature of free_reserved_area() to fix building warnings
Change signature of free_reserved_area() according to Russell King's
suggestion to fix following build warnings:

  arch/arm/mm/init.c: In function 'mem_init':
  arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default]
    free_reserved_area(__va(PHYS_PFN_OFFSET), swapper_pg_dir, 0, NULL);
    ^
  In file included from include/linux/mman.h:4:0,
                   from arch/arm/mm/init.c:15:
  include/linux/mm.h:1301:22: note: expected 'long unsigned int' but argument is of type 'void *'
   extern unsigned long free_reserved_area(unsigned long start, unsigned long end,

   mm/page_alloc.c: In function 'free_reserved_area':
>> mm/page_alloc.c:5134:3: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast [enabled by default]
   In file included from arch/mips/include/asm/page.h:49:0,
                    from include/linux/mmzone.h:20,
                    from include/linux/gfp.h:4,
                    from include/linux/mm.h:8,
                    from mm/page_alloc.c:18:
   arch/mips/include/asm/io.h:119:29: note: expected 'const volatile void *' but argument is of type 'long unsigned int'
   mm/page_alloc.c: In function 'free_area_init_nodes':
   mm/page_alloc.c:5030:34: warning: array subscript is below array bounds [-Warray-bounds]

Also address some minor code review comments.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:32 -07:00
Rafael Aquini dcf6b7ddd7 swap: discard while swapping only if SWAP_FLAG_DISCARD_PAGES
Considering the use cases where the swap device supports discard:
a) and can do it quickly;
b) but it's slow to do in small granularities (or concurrent with other
   I/O);
c) but the implementation is so horrendous that you don't even want to
   send one down;

And assuming that the sysadmin considers it useful to send the discards down
at all, we would (probably) want the following solutions:

  i. do the fine-grained discards for freed swap pages, if device is
     capable of doing so optimally;
 ii. do single-time (batched) swap area discards, either at swapon
     or via something like fstrim (not implemented yet);
iii. allow doing both single-time and fine-grained discards; or
 iv. turn it off completely (default behavior)

As implemented today, one can only enable/disable discards for swap, but
one cannot select, for instance, solution (ii) on a swap device like (b)
even though the single-time discard is regarded to be interesting, or
necessary to the workload because it would imply (1), and the device is
not capable of performing it optimally.

This patch addresses the scenario depicted above by introducing a way to
ensure the (probably) wanted solutions (i, ii, iii and iv) can be flexibly
flagged through swapon(8) to allow a sysadmin to select the best suitable
swap discard policy accordingly to system constraints.

This patch introduces SWAP_FLAG_DISCARD_PAGES and SWAP_FLAG_DISCARD_ONCE
new flags to allow more flexibe swap discard policies being flagged
through swapon(8).  The default behavior is to keep both single-time, or
batched, area discards (SWAP_FLAG_DISCARD_ONCE) and fine-grained discards
for page-clusters (SWAP_FLAG_DISCARD_PAGES) enabled, in order to keep
consistentcy with older kernel behavior, as well as maintain compatibility
with older swapon(8).  However, through the new introduced flags the best
suitable discard policy can be selected accordingly to any given swap
device constraint.

[akpm@linux-foundation.org: tweak comments]
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Karel Zak <kzak@redhat.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:32 -07:00
Tim Chen 917d9290af mm: tune vm_committed_as percpu_counter batching size
Currently the per cpu counter's batch size for memory accounting is
configured as twice the number of cpus in the system.  However, for
system with very large memory, it is more appropriate to make it
proportional to the memory size per cpu in the system.

For example, for a x86_64 system with 64 cpus and 128 GB of memory, the
batch size is only 2*64 pages (0.5 MB).  So any memory accounting
changes of more than 0.5MB will overflow the per cpu counter into the
global counter.  Instead, for the new scheme, the batch size is
configured to be 0.4% of the memory/cpu = 8MB (128 GB/64 /256), which is
more inline with the memory size.

I've done a repeated brk test of 800KB (from will-it-scale test suite)
with 80 concurrent processes on a 4 socket Westmere machine with a total
of 40 cores.  Without the patch, about 80% of cpu is spent on spin-lock
contention within the vm_committed_as counter.  With the patch, there's
a 73x speedup on the benchmark and the lock contention drops off almost
entirely.

[akpm@linux-foundation.org: fix section mismatch]
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:32 -07:00
Wanpeng Li 2415cf12e0 mm/hugetlb: use already existing interface huge_page_shift
Use the already existing interface huge_page_shift instead of h->order +
PAGE_SHIFT.

Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:32 -07:00
Wanpeng Li cea27eb2a2 mm/memory-hotplug: fix lowmem count overflow when offline pages
The logic for the memory-remove code fails to correctly account the
Total High Memory when a memory block which contains High Memory is
offlined as shown in the example below.  The following patch fixes it.

Before logic memory remove:

MemTotal:        7603740 kB
MemFree:         6329612 kB
Buffers:           94352 kB
Cached:           872008 kB
SwapCached:            0 kB
Active:           626932 kB
Inactive:         519216 kB
Active(anon):     180776 kB
Inactive(anon):   222944 kB
Active(file):     446156 kB
Inactive(file):   296272 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:       7294672 kB
HighFree:        5704696 kB
LowTotal:         309068 kB
LowFree:          624916 kB

After logic memory remove:

MemTotal:        7079452 kB
MemFree:         5805976 kB
Buffers:           94372 kB
Cached:           872000 kB
SwapCached:            0 kB
Active:           626936 kB
Inactive:         519236 kB
Active(anon):     180780 kB
Inactive(anon):   222944 kB
Active(file):     446156 kB
Inactive(file):   296292 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:       7294672 kB
HighFree:        5181024 kB
LowTotal:       4294752076 kB
LowFree:          624952 kB

[mhocko@suse.cz: fix CONFIG_HIGHMEM=n build]
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>	[2.6.24+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:32 -07:00
Toshi Kani 4996eed867 mm/memory_hotplug.c: change normal message to use pr_debug
During early boot-up, iomem_resource is set up from the boot descriptor
table, such as EFI Memory Table and e820.  Later,
acpi_memory_device_add() calls add_memory() for each ACPI memory device
object as it enumerates ACPI namespace.  This add_memory() call is
expected to fail in register_memory_resource() at boot since
iomem_resource has been set up from EFI/e820.  As a result, add_memory()
returns -EEXIST, which acpi_memory_device_add() handles as the normal
case.

This scheme works fine, but the following error message is logged for
every ACPI memory device object during boot-up.

  "System RAM resource %pR cannot be added\n"

This patch changes register_memory_resource() to use pr_debug() for the
message as it shows up under the normal case.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:31 -07:00
Naoya Horiguchi f15bdfa802 mm/memory-failure.c: fix memory leak in successful soft offlining
After a successful page migration by soft offlining, the source page is
not properly freed and it's never reusable even if we unpoison it
afterward.

This is caused by the race between freeing page and setting PG_hwpoison.
In successful soft offlining, the source page is put (and the refcount
becomes 0) by putback_lru_page() in unmap_and_move(), where it's linked
to pagevec and actual freeing back to buddy is delayed.  So if
PG_hwpoison is set for the page before freeing, the freeing does not
functions as expected (in such case freeing aborts in
free_pages_prepare() check.)

This patch tries to make sure to free the source page before setting
PG_hwpoison on it.  To avoid reallocating, the page keeps
MIGRATE_ISOLATE until after setting PG_hwpoison.

This patch also removes obsolete comments about "keeping elevated
refcount" because what they say is not true.  Unlike memory_failure(),
soft_offline_page() uses no special page isolation code, and the
soft-offlined pages have no elevated.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:31 -07:00
Chen Gang 9bde916bc7 mm/nommu.c: add additional check for vread() just like vwrite() has done
vwrite() checks for overflow. vread() should do the same thing.

Since vwrite() checks the source buffer address, vread() should check
the destination buffer address.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:31 -07:00
Chen Gang dacbde0963 mm/page_alloc.c: add additional checking and return value for the 'table->data'
- check the length of the procfs data before copying it into a fixed
  size array.

- when __parse_numa_zonelist_order() fails, save the error code for
  return.

- 'char*' --> 'char *' coding style fix

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:31 -07:00
Mel Gorman c53954a092 mm: remove lru parameter from __lru_cache_add and lru_cache_add_lru
Similar to __pagevec_lru_add, this patch removes the LRU parameter from
__lru_cache_add and lru_cache_add_lru as the caller does not control the
exact LRU the page gets added to.  lru_cache_add_lru gets renamed to
lru_cache_add the name is silly without the lru parameter.  With the
parameter removed, it is required that the caller indicate if they want
the page added to the active or inactive list by setting or clearing
PageActive respectively.

[akpm@linux-foundation.org: Suggested the patch]
[gang.chen@asianux.com: fix used-unintialized warning]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com>
Cc: Andrew Perepechko <anserper@ya.ru>
Cc: Robin Dong <sanbai@taobao.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Bernd Schubert <bernd.schubert@fastmail.fm>
Cc: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:31 -07:00
Mel Gorman a0b8cab3b9 mm: remove lru parameter from __pagevec_lru_add and remove parts of pagevec API
Now that the LRU to add a page to is decided at LRU-add time, remove the
misleading lru parameter from __pagevec_lru_add.  A consequence of this
is that the pagevec_lru_add_file, pagevec_lru_add_anon and similar
helpers are misleading as the caller no longer has direct control over
what LRU the page is added to.  Unused helpers are removed by this patch
and existing users of pagevec_lru_add_file() are converted to use
lru_cache_add_file() directly and use the per-cpu pagevecs instead of
creating their own pagevec.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com>
Cc: Andrew Perepechko <anserper@ya.ru>
Cc: Robin Dong <sanbai@taobao.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Bernd Schubert <bernd.schubert@fastmail.fm>
Cc: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:31 -07:00
Mel Gorman 059285a25f mm: activate !PageLRU pages on mark_page_accessed if page is on local pagevec
If a page is on a pagevec then it is !PageLRU and mark_page_accessed()
may fail to move a page to the active list as expected.  Now that the
LRU is selected at LRU drain time, mark pages PageActive if they are on
the local pagevec so it gets moved to the correct list at LRU drain
time.  Using a debugging patch it was found that for a simple git
checkout based workload that pages were never added to the active file
list in practice but with this patch applied they are.

				before   after
LRU Add Active File                  0      750583
LRU Add Active Anon            2640587     2702818
LRU Add Inactive File          8833662     8068353
LRU Add Inactive Anon              207         200

Note that only pages on the local pagevec are considered on purpose.  A
!PageLRU page could be in the process of being released, reclaimed,
migrated or on a remote pagevec that is currently being drained.
Marking it PageActive is vunerable to races where PageLRU and Active
bits are checked at the wrong time.  Page reclaim will trigger
VM_BUG_ONs but depending on when the race hits, it could also free a
PageActive page to the page allocator and trigger a bad_page warning.
Similarly a potential race exists between a per-cpu drain on a pagevec
list and an activation on a remote CPU.

				lru_add_drain_cpu
				__pagevec_lru_add
				  lru = page_lru(page);
mark_page_accessed
  if (PageLRU(page))
    activate_page
  else
    SetPageActive
				  SetPageLRU(page);
				  add_page_to_lru_list(page, lruvec, lru);

In this case a PageActive page is added to the inactivate list and later
the inactive/active stats will get skewed.  While the PageActive checks
in vmscan could be removed and potentially dealt with, a skew in the
statistics would be very difficult to detect.  Hence this patch deals
just with the common case where a page being marked accessed has just
been added to the local pagevec.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com>
Cc: Andrew Perepechko <anserper@ya.ru>
Cc: Robin Dong <sanbai@taobao.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Bernd Schubert <bernd.schubert@fastmail.fm>
Cc: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:31 -07:00
Mel Gorman 13f7f78981 mm: pagevec: defer deciding which LRU to add a page to until pagevec drain time
mark_page_accessed() cannot activate an inactive page that is located on
an inactive LRU pagevec.  Hints from filesystems may be ignored as a
result.  In preparation for fixing that problem, this patch removes the
per-LRU pagevecs and leaves just one pagevec.  The final LRU the page is
added to is deferred until the pagevec is drained.

This means that fewer pagevecs are available and potentially there is
greater contention on the LRU lock.  However, this only applies in the
case where there is an almost perfect mix of file, anon, active and
inactive pages being added to the LRU.  In practice I expect that we are
adding stream of pages of a particular time and that the changes in
contention will barely be measurable.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com>
Cc: Andrew Perepechko <anserper@ya.ru>
Cc: Robin Dong <sanbai@taobao.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Bernd Schubert <bernd.schubert@fastmail.fm>
Cc: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:31 -07:00
Mel Gorman c6286c9839 mm: add tracepoints for LRU activation and insertions
Andrew Perepechko reported a problem whereby pages are being prematurely
evicted as the mark_page_accessed() hint is ignored for pages that are
currently on a pagevec --
http://www.spinics.net/lists/linux-ext4/msg37340.html .

Alexey Lyahkov and Robin Dong have also reported problems recently that
could be due to hot pages reaching the end of the inactive list too
quickly and be reclaimed.

Rather than addressing this on a per-filesystem basis, this series aims
to fix the mark_page_accessed() interface by deferring what LRU a page
is added to pagevec drain time and allowing mark_page_accessed() to call
SetPageActive on a pagevec page.

Patch 1 adds two tracepoints for LRU page activation and insertion. Using
	these processes it's possible to build a model of pages in the
	LRU that can be processed offline.

Patch 2 defers making the decision on what LRU to add a page to until when
	the pagevec is drained.

Patch 3 searches the local pagevec for pages to mark PageActive on
	mark_page_accessed. The changelog explains why only the local
	pagevec is examined.

Patches 4 and 5 tidy up the API.

postmark, a dd-based test and fs-mark both single and threaded mode were
run but none of them showed any performance degradation or gain as a
result of the patch.

Using patch 1, I built a *very* basic model of the LRU to examine
offline what the average age of different page types on the LRU were in
milliseconds.  Of course, capturing the trace distorts the test as it's
written to local disk but it does not matter for the purposes of this
test.  The average age of pages in milliseconds were

				    vanilla deferdrain
Average age mapped anon:               1454       1250
Average age mapped file:             127841     155552
Average age unmapped anon:               85        235
Average age unmapped file:            73633      38884
Average age unmapped buffers:         74054     116155

The LRU activity was mostly files which you'd expect for a dd-based
workload.  Note that the average age of buffer pages is increased by the
series and it is expected this is due to the fact that the buffer pages
are now getting added to the active list when drained from the pagevecs.
Note that the average age of the unmapped file data is decreased as they
are still added to the inactive list and are reclaimed before the
buffers.

There is no guarantee this is a universal win for all workloads and it
would be nice if the filesystem people gave some thought as to whether
this decision is generally a win or a loss.

This patch:

Using these tracepoints it is possible to model LRU activity and the
average residency of pages of different types.  This can be used to
debug problems related to premature reclaim of pages of particular
types.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com>
Cc: Andrew Perepechko <anserper@ya.ru>
Cc: Robin Dong <sanbai@taobao.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Bernd Schubert <bernd.schubert@fastmail.fm>
Cc: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:31 -07:00
HATAYAMA Daisuke e69e9d4aee vmalloc: introduce remap_vmalloc_range_partial
We want to allocate ELF note segment buffer on the 2nd kernel in vmalloc
space and remap it to user-space in order to reduce the risk that memory
allocation fails on system with huge number of CPUs and so with huge ELF
note segment that exceeds 11-order block size.

Although there's already remap_vmalloc_range for the purpose of
remapping vmalloc memory to user-space, we need to specify user-space
range via vma.
 Mmap on /proc/vmcore needs to remap range across multiple objects, so
the interface that requires vma to cover full range is problematic.

This patch introduces remap_vmalloc_range_partial that receives user-space
range as a pair of base address and size and can be used for mmap on
/proc/vmcore case.

remap_vmalloc_range is rewritten using remap_vmalloc_range_partial.

[akpm@linux-foundation.org: use PAGE_ALIGNED()]
Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Lisa Mitchell <lisa.mitchell@hp.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:30 -07:00
HATAYAMA Daisuke cef2ac3f6c vmalloc: make find_vm_area check in range
Currently, __find_vmap_area searches for the kernel VM area starting at
a given address.  This patch changes this behavior so that it searches
for the kernel VM area to which the address belongs.  This change is
needed by remap_vmalloc_range_partial to be introduced in later patch
that receives any position of kernel VM area as target address.

This patch changes the condition (addr > va->va_start) to the equivalent
(addr >= va->va_end) by taking advantage of the fact that each kernel VM
area is non-overlapping.

Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Lisa Mitchell <lisa.mitchell@hp.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:30 -07:00
Cody P Schafer d702909f0a memory_hotplug: use pgdat_resize_lock() in __offline_pages()
mmzone.h documents node_size_lock (which pgdat_resize_lock() locks) as
follows:

        * Must be held any time you expect node_start_pfn, node_present_pages
        * or node_spanned_pages stay constant.  [...]

So actually hold it when we update node_present_pages in __offline_pages().

[akpm@linux-foundation.org: fix build]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:29 -07:00
Cody P Schafer aa47228a18 memory_hotplug: use pgdat_resize_lock() in online_pages()
mmzone.h documents node_size_lock (which pgdat_resize_lock() locks) as
follows:

        * Must be held any time you expect node_start_pfn, node_present_pages
        * or node_spanned_pages stay constant.  [...]

So actually hold it when we update node_present_pages in online_pages().

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:29 -07:00
Mel Gorman b45972265f mm: vmscan: take page buffers dirty and locked state into account
Page reclaim keeps track of dirty and under writeback pages and uses it
to determine if wait_iff_congested() should stall or if kswapd should
begin writing back pages.  This fails to account for buffer pages that
can be under writeback but not PageWriteback which is the case for
filesystems like ext3 ordered mode.  Furthermore, PageDirty buffer pages
can have all the buffers clean and writepage does no IO so it should not
be accounted as congested.

This patch adds an address_space operation that filesystems may
optionally use to check if a page is really dirty or really under
writeback.  An implementation is provided for for buffer_heads is added
and used for block operations and ext3 in ordered mode.  By default the
page flags are obeyed.

Credit goes to Jan Kara for identifying that the page flags alone are
not sufficient for ext3 and sanity checking a number of ideas on how the
problem could be addressed.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:29 -07:00
Mel Gorman d04e8acd03 mm: vmscan: treat pages marked for immediate reclaim as zone congestion
Currently a zone will only be marked congested if the underlying BDI is
congested but if dirty pages are spread across zones it is possible that
an individual zone is full of dirty pages without being congested.  The
impact is that zone gets scanned very quickly potentially reclaiming
really clean pages.  This patch treats pages marked for immediate
reclaim as congested for the purposes of marking a zone ZONE_CONGESTED
and stalling in wait_iff_congested.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:29 -07:00
Mel Gorman 8e95028280 mm: vmscan: move direct reclaim wait_iff_congested into shrink_list
shrink_inactive_list makes decisions on whether to stall based on the
number of dirty pages encountered.  The wait_iff_congested() call in
shrink_page_list does no such thing and it's arbitrary.

This patch moves the decision on whether to set ZONE_CONGESTED and the
wait_iff_congested call into shrink_page_list.  This keeps all the
decisions on whether to stall or not in the one place.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:29 -07:00
Mel Gorman f7ab8db791 mm: vmscan: set zone flags before blocking
In shrink_page_list a decision may be made to stall and flag a zone as
ZONE_WRITEBACK so that if a large number of unqueued dirty pages are
encountered later then the reclaimer will stall.  Set ZONE_WRITEBACK
before potentially going to sleep so it is noticed sooner.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:29 -07:00
Mel Gorman b1a6f21e3b mm: vmscan: stall page reclaim after a list of pages have been processed
Commit "mm: vmscan: Block kswapd if it is encountering pages under
writeback" blocks page reclaim if it encounters pages under writeback
marked for immediate reclaim.  It blocks while pages are still isolated
from the LRU which is unnecessary.  This patch defers the blocking until
after the isolated pages have been processed and tidies up some of the
comments.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:29 -07:00
Mel Gorman e2be15f6c3 mm: vmscan: stall page reclaim and writeback pages based on dirty/writepage pages encountered
Further testing of the "Reduce system disruption due to kswapd"
discovered a few problems.  First and foremost, it's possible for pages
under writeback to be freed which will lead to badness.  Second, as
pages were not being swapped the file LRU was being scanned faster and
clean file pages were being reclaimed.  In some cases this results in
increased read IO to re-read data from disk.  Third, more pages were
being written from kswapd context which can adversly affect IO
performance.  Lastly, it was observed that PageDirty pages are not
necessarily dirty on all filesystems (buffers can be clean while
PageDirty is set and ->writepage generates no IO) and not all
filesystems set PageWriteback when the page is being written (e.g.
ext3).  This disconnect confuses the reclaim stalling logic.  This
follow-up series is aimed at these problems.

The tests were based on three kernels

vanilla:	kernel 3.9 as that is what the current mmotm uses as a baseline
mmotm-20130522	is mmotm as of 22nd May with "Reduce system disruption due to
		kswapd" applied on top as per what should be in Andrew's tree
		right now
lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel

The first test used memcached+memcachetest while some background IO was
in progress as implemented by the parallel IO tests implement in MM
Tests.  memcachetest benchmarks how many operations/second memcached can
service.  It starts with no background IO on a freshly created ext4
filesystem and then re-runs the test with larger amounts of IO in the
background to roughly simulate a large copy in progress.  The
expectation is that the IO should have little or no impact on
memcachetest which is running entirely in memory.

parallelio
                                             3.9.0                       3.9.0                       3.9.0
                                           vanilla          mm1-mmotm-20130522       mm1-lessdisrupt-v7r10
Ops memcachetest-0M             23117.00 (  0.00%)          22780.00 ( -1.46%)          22763.00 ( -1.53%)
Ops memcachetest-715M           23774.00 (  0.00%)          23299.00 ( -2.00%)          22934.00 ( -3.53%)
Ops memcachetest-2385M           4208.00 (  0.00%)          24154.00 (474.00%)          23765.00 (464.76%)
Ops memcachetest-4055M           4104.00 (  0.00%)          25130.00 (512.33%)          24614.00 (499.76%)
Ops io-duration-0M                  0.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops io-duration-715M               12.00 (  0.00%)              7.00 ( 41.67%)              6.00 ( 50.00%)
Ops io-duration-2385M             116.00 (  0.00%)             21.00 ( 81.90%)             21.00 ( 81.90%)
Ops io-duration-4055M             160.00 (  0.00%)             36.00 ( 77.50%)             35.00 ( 78.12%)
Ops swaptotal-0M                    0.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swaptotal-715M             140138.00 (  0.00%)             18.00 ( 99.99%)             18.00 ( 99.99%)
Ops swaptotal-2385M            385682.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swaptotal-4055M            418029.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-0M                       0.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-715M                   144.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-2385M               134227.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-4055M               125618.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops minorfaults-0M            1536429.00 (  0.00%)        1531632.00 (  0.31%)        1533541.00 (  0.19%)
Ops minorfaults-715M          1786996.00 (  0.00%)        1612148.00 (  9.78%)        1608832.00 (  9.97%)
Ops minorfaults-2385M         1757952.00 (  0.00%)        1614874.00 (  8.14%)        1613541.00 (  8.21%)
Ops minorfaults-4055M         1774460.00 (  0.00%)        1633400.00 (  7.95%)        1630881.00 (  8.09%)
Ops majorfaults-0M                  1.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops majorfaults-715M              184.00 (  0.00%)            167.00 (  9.24%)            166.00 (  9.78%)
Ops majorfaults-2385M           24444.00 (  0.00%)            155.00 ( 99.37%)             93.00 ( 99.62%)
Ops majorfaults-4055M           21357.00 (  0.00%)            147.00 ( 99.31%)            134.00 ( 99.37%)

memcachetest is the transactions/second reported by memcachetest. In
        the vanilla kernel note that performance drops from around
        23K/sec to just over 4K/second when there is 2385M of IO going
        on in the background. With current mmotm, there is no collapse
	in performance and with this follow-up series there is little
	change.

swaptotal is the total amount of swap traffic. With mmotm and the follow-up
	series, the total amount of swapping is much reduced.

                                 3.9.0       3.9.0       3.9.0
                               vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Minor Faults                  11160152    10706748    10622316
Major Faults                     46305         755         678
Swap Ins                        260249           0           0
Swap Outs                       683860          18          18
Direct pages scanned                 0         678        2520
Kswapd pages scanned           6046108     8814900     1639279
Kswapd pages reclaimed         1081954     1172267     1094635
Direct pages reclaimed               0         566        2304
Kswapd efficiency                  17%         13%         66%
Kswapd velocity               5217.560    7618.953    1414.879
Direct efficiency                 100%         83%         91%
Direct velocity                  0.000       0.586       2.175
Percentage direct scans             0%          0%          0%
Zone normal velocity          5105.086    6824.681     671.158
Zone dma32 velocity            112.473     794.858     745.896
Zone dma velocity                0.000       0.000       0.000
Page writes by reclaim     1929612.000 6861768.000   32821.000
Page writes file               1245752     6861750       32803
Page writes anon                683860          18          18
Page reclaim immediate            7484          40         239
Sector Reads                   1130320       93996       86900
Sector Writes                 13508052    10823500    11804436
Page rescued immediate               0           0           0
Slabs scanned                    33536       27136       18560
Direct inode steals                  0           0           0
Kswapd inode steals               8641        1035           0
Kswapd skipped wait                  0           0           0
THP fault alloc                      8          37          33
THP collapse alloc                 508         552         515
THP splits                          24           1           1
THP fault fallback                   0           0           0
THP collapse fail                    0           0           0

There are a number of observations to make here

1. Swap outs are almost eliminated. Swap ins are 0 indicating that the
   pages swapped were really unused anonymous pages. Related to that,
   major faults are much reduced.

2. kswapd efficiency was impacted by the initial series but with these
   follow-up patches, the efficiency is now at 66% indicating that far
   fewer pages were skipped during scanning due to dirty or writeback
   pages.

3. kswapd velocity is reduced indicating that fewer pages are being scanned
   with the follow-up series as kswapd now stalls when the tail of the
   LRU queue is full of unqueued dirty pages. The stall gives flushers a
   chance to catch-up so kswapd can reclaim clean pages when it wakes

4. In light of Zlatko's recent reports about zone scanning imbalances,
   mmtests now reports scanning velocity on a per-zone basis. With mainline,
   you can see that the scanning activity is dominated by the Normal
   zone with over 45 times more scanning in Normal than the DMA32 zone.
   With the series currently in mmotm, the ratio is slightly better but it
   is still the case that the bulk of scanning is in the highest zone. With
   this follow-up series, the ratio of scanning between the Normal and
   DMA32 zone is roughly equal.

5. As Dave Chinner observed, the current patches in mmotm increased the
   number of pages written from kswapd context which is expected to adversly
   impact IO performance. With the follow-up patches, far fewer pages are
   written from kswapd context than the mainline kernel

6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With
   the follow-up series, there is less slab shrinking activity and no inodes
   were reclaimed.

7. Note that "Sectors Read" is drastically reduced implying that the source
   data being used for the IO is not being aggressively discarded due to
   page reclaim skipping over dirty pages and reclaiming clean pages. Note
   that the reducion in reads could also be due to inode data not being
   re-read from disk after a slab shrink.

                       3.9.0       3.9.0       3.9.0
                     vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Mean sda-avgqz        166.99       32.09       33.44
Mean sda-await        853.64      192.76      185.43
Mean sda-r_await        6.31        9.24        5.97
Mean sda-w_await     2992.81      202.65      192.43
Max  sda-avgqz       1409.91      718.75      698.98
Max  sda-await       6665.74     3538.00     3124.23
Max  sda-r_await       58.96      111.95       58.00
Max  sda-w_await    28458.94     3977.29     3148.61

In light of the changes in writes from reclaim context, the number of
reads and Dave Chinner's concerns about IO performance I took a closer
look at the IO stats for the test disk. Few observations

1. The average queue size is reduced by the initial series and roughly
   the same with this follow up.

2. Average wait times for writes are reduced and as the IO
   is completing faster it at least implies that the gain is because
   flushers are writing the files efficiently instead of page reclaim
   getting in the way.

3. The reduction in maximum write latency is staggering. 28 seconds down
   to 3 seconds.

Jan Kara asked how NFS is affected by all of this. Unstable pages can
be taken into account as one of the patches in the series shows but it
is still the case that filesystems with unusual handling of dirty or
writeback could still be treated better.

Tests like postmark, fsmark and largedd showed up nothing useful. On my test
setup, pages are simply not being written back from reclaim context with or
without the patches and there are no changes in performance. My test setup
probably is just not strong enough network-wise to be really interesting.

I ran a longer-lived memcached test with IO going to NFS instead of a local disk

parallelio
                                             3.9.0                       3.9.0                       3.9.0
                                           vanilla          mm1-mmotm-20130522       mm1-lessdisrupt-v7r10
Ops memcachetest-0M             23323.00 (  0.00%)          23241.00 ( -0.35%)          23321.00 ( -0.01%)
Ops memcachetest-715M           25526.00 (  0.00%)          24763.00 ( -2.99%)          23242.00 ( -8.95%)
Ops memcachetest-2385M           8814.00 (  0.00%)          26924.00 (205.47%)          23521.00 (166.86%)
Ops memcachetest-4055M           5835.00 (  0.00%)          26827.00 (359.76%)          25560.00 (338.05%)
Ops io-duration-0M                  0.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops io-duration-715M               65.00 (  0.00%)             71.00 ( -9.23%)             11.00 ( 83.08%)
Ops io-duration-2385M             129.00 (  0.00%)             94.00 ( 27.13%)             53.00 ( 58.91%)
Ops io-duration-4055M             301.00 (  0.00%)            100.00 ( 66.78%)            108.00 ( 64.12%)
Ops swaptotal-0M                    0.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swaptotal-715M              14394.00 (  0.00%)            949.00 ( 93.41%)             63.00 ( 99.56%)
Ops swaptotal-2385M            401483.00 (  0.00%)          24437.00 ( 93.91%)          30118.00 ( 92.50%)
Ops swaptotal-4055M            554123.00 (  0.00%)          35688.00 ( 93.56%)          63082.00 ( 88.62%)
Ops swapin-0M                       0.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-715M                  4522.00 (  0.00%)            560.00 ( 87.62%)             63.00 ( 98.61%)
Ops swapin-2385M               169861.00 (  0.00%)           5026.00 ( 97.04%)          13917.00 ( 91.81%)
Ops swapin-4055M               192374.00 (  0.00%)          10056.00 ( 94.77%)          25729.00 ( 86.63%)
Ops minorfaults-0M            1445969.00 (  0.00%)        1520878.00 ( -5.18%)        1454024.00 ( -0.56%)
Ops minorfaults-715M          1557288.00 (  0.00%)        1528482.00 (  1.85%)        1535776.00 (  1.38%)
Ops minorfaults-2385M         1692896.00 (  0.00%)        1570523.00 (  7.23%)        1559622.00 (  7.87%)
Ops minorfaults-4055M         1654985.00 (  0.00%)        1581456.00 (  4.44%)        1596713.00 (  3.52%)
Ops majorfaults-0M                  0.00 (  0.00%)              1.00 (-99.00%)              0.00 (  0.00%)
Ops majorfaults-715M              763.00 (  0.00%)            265.00 ( 65.27%)             75.00 ( 90.17%)
Ops majorfaults-2385M           23861.00 (  0.00%)            894.00 ( 96.25%)           2189.00 ( 90.83%)
Ops majorfaults-4055M           27210.00 (  0.00%)           1569.00 ( 94.23%)           4088.00 ( 84.98%)

1. Performance does not collapse due to IO which is good. IO is also completing
   faster. Note with mmotm, IO completes in a third of the time and faster again
   with this series applied

2. Swapping is reduced, although not eliminated. The figures for the follow-up
   look bad but it does vary a bit as the stalling is not perfect for nfs
   or filesystems like ext3 with unusual handling of dirty and writeback
   pages

3. There are swapins, particularly with larger amounts of IO indicating
   that active pages are being reclaimed. However, the number of much
   reduced.

                                 3.9.0       3.9.0       3.9.0
                               vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Minor Faults                  36339175    35025445    35219699
Major Faults                    310964       27108       51887
Swap Ins                       2176399      173069      333316
Swap Outs                      3344050      357228      504824
Direct pages scanned              8972       77283       43242
Kswapd pages scanned          20899983     8939566    14772851
Kswapd pages reclaimed         6193156     5172605     5231026
Direct pages reclaimed            8450       73802       39514
Kswapd efficiency                  29%         57%         35%
Kswapd velocity               3929.743    1847.499    3058.840
Direct efficiency                  94%         95%         91%
Direct velocity                  1.687      15.972       8.954
Percentage direct scans             0%          0%          0%
Zone normal velocity          3721.907     939.103    2185.142
Zone dma32 velocity            209.522     924.368     882.651
Zone dma velocity                0.000       0.000       0.000
Page writes by reclaim     4082185.000  526319.000  537114.000
Page writes file                738135      169091       32290
Page writes anon               3344050      357228      504824
Page reclaim immediate            9524         170     5595843
Sector Reads                   8909900      861192     1483680
Sector Writes                 13428980     1488744     2076800
Page rescued immediate               0           0           0
Slabs scanned                    38016       31744       28672
Direct inode steals                  0           0           0
Kswapd inode steals                424           0           0
Kswapd skipped wait                  0           0           0
THP fault alloc                     14          15         119
THP collapse alloc                1767        1569        1618
THP splits                          30          29          25
THP fault fallback                   0           0           0
THP collapse fail                    8           5           0
Compaction stalls                   17          41         100
Compaction success                   7          31          95
Compaction failures                 10          10           5
Page migrate success              7083       22157       62217
Page migrate failure                 0           0           0
Compaction pages isolated        14847       48758      135830
Compaction migrate scanned       18328       48398      138929
Compaction free scanned        2000255      355827     1720269
Compaction cost                      7          24          68

I guess the main takeaway again is the much reduced page writes
from reclaim context and reduced reads.

                       3.9.0       3.9.0       3.9.0
                     vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Mean sda-avgqz         23.58        0.35        0.44
Mean sda-await        133.47       15.72       15.46
Mean sda-r_await        4.72        4.69        3.95
Mean sda-w_await      507.69       28.40       33.68
Max  sda-avgqz        680.60       12.25       23.14
Max  sda-await       3958.89      221.83      286.22
Max  sda-r_await       63.86       61.23       67.29
Max  sda-w_await    11710.38      883.57     1767.28

And as before, write wait times are much reduced.

This patch:

The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages
encountered, not priority" decides whether to writeback pages from reclaim
context based on the number of dirty pages encountered.  This situation is
flagged too easily and flushers are not given the chance to catch up
resulting in more pages being written from reclaim context and potentially
impacting IO performance.  The check for PageWriteback is also misplaced
as it happens within a PageDirty check which is nonsense as the dirty may
have been cleared for IO.  The accounting is updated very late and pages
that are already under writeback, were reactivated, could not unmapped or
could not be released are all missed.  Similarly, a page is considered
congested for reasons other than being congested and pages that cannot be
written out in the correct context are skipped.  Finally, it considers
stalling and writing back filesystem pages due to encountering dirty
anonymous pages at the tail of the LRU which is dumb.

This patch causes kswapd to begin writing filesystem pages from reclaim
context only if page reclaim found that all filesystem pages at the tail
of the LRU were unqueued dirty pages.  Before it starts writing filesystem
pages, it will stall to give flushers a chance to catch up.  The decision
on whether wait_iff_congested is also now determined by dirty filesystem
pages only.  Congested pages are based on whether the underlying BDI is
congested regardless of the context of the reclaiming process.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:28 -07:00
Mel Gorman 7c954f6de6 mm: vmscan: move logic from balance_pgdat() to kswapd_shrink_zone()
balance_pgdat() is very long and some of the logic can and should be
internal to kswapd_shrink_zone().  Move it so the flow of
balance_pgdat() is marginally easier to follow.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:28 -07:00
Mel Gorman b7ea3c417b mm: vmscan: check if kswapd should writepage once per pgdat scan
Currently kswapd checks if it should start writepage as it shrinks each
zone without taking into consideration if the zone is balanced or not.
This is not wrong as such but it does not make much sense either.  This
patch checks once per pgdat scan if kswapd should be writing pages.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:28 -07:00
Mel Gorman 283aba9f9e mm: vmscan: block kswapd if it is encountering pages under writeback
Historically, kswapd used to congestion_wait() at higher priorities if
it was not making forward progress.  This made no sense as the failure
to make progress could be completely independent of IO.  It was later
replaced by wait_iff_congested() and removed entirely by commit 258401a6
(mm: don't wait on congested zones in balance_pgdat()) as it was
duplicating logic in shrink_inactive_list().

This is problematic.  If kswapd encounters many pages under writeback
and it continues to scan until it reaches the high watermark then it
will quickly skip over the pages under writeback and reclaim clean young
pages or push applications out to swap.

The use of wait_iff_congested() is not suited to kswapd as it will only
stall if the underlying BDI is really congested or a direct reclaimer
was unable to write to the underlying BDI.  kswapd bypasses the BDI
congestion as it sets PF_SWAPWRITE but even if this was taken into
account then it would cause direct reclaimers to stall on writeback
which is not desirable.

This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is
encountering too many pages under writeback.  If this flag is set and
kswapd encounters a PageReclaim page under writeback then it'll assume
that the LRU lists are being recycled too quickly before IO can complete
and block waiting for some IO to complete.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:28 -07:00
Mel Gorman d43006d503 mm: vmscan: have kswapd writeback pages based on dirty pages encountered, not priority
Currently kswapd queues dirty pages for writeback if scanning at an
elevated priority but the priority kswapd scans at is not related to the
number of unqueued dirty encountered.  Since commit "mm: vmscan: Flatten
kswapd priority loop", the priority is related to the size of the LRU
and the zone watermark which is no indication as to whether kswapd
should write pages or not.

This patch tracks if an excessive number of unqueued dirty pages are
being encountered at the end of the LRU.  If so, it indicates that dirty
pages are being recycled before flusher threads can clean them and flags
the zone so that kswapd will start writing pages until the zone is
balanced.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:28 -07:00
Mel Gorman 9aa41348a8 mm: vmscan: do not allow kswapd to scan at maximum priority
Page reclaim at priority 0 will scan the entire LRU as priority 0 is
considered to be a near OOM condition.  Kswapd can reach priority 0
quite easily if it is encountering a large number of pages it cannot
reclaim such as pages under writeback.  When this happens, kswapd
reclaims very aggressively even though there may be no real risk of
allocation failure or OOM.

This patch prevents kswapd reaching priority 0 and trying to reclaim the
world.  Direct reclaimers will still reach priority 0 in the event of an
OOM situation.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:28 -07:00
Mel Gorman 2ab44f4345 mm: vmscan: decide whether to compact the pgdat based on reclaim progress
In the past, kswapd makes a decision on whether to compact memory after
the pgdat was considered balanced.  This more or less worked but it is
late to make such a decision and does not fit well now that kswapd makes
a decision whether to exit the zone scanning loop depending on reclaim
progress.

This patch will compact a pgdat if at least the requested number of
pages were reclaimed from unbalanced zones for a given priority.  If any
zone is currently balanced, kswapd will not call compaction as it is
expected the necessary pages are already available.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:28 -07:00
Mel Gorman b8e83b942a mm: vmscan: flatten kswapd priority loop
kswapd stops raising the scanning priority when at least
SWAP_CLUSTER_MAX pages have been reclaimed or the pgdat is considered
balanced.  It then rechecks if it needs to restart at DEF_PRIORITY and
whether high-order reclaim needs to be reset.  This is not wrong per-se
but it is confusing to follow and forcing kswapd to stay at DEF_PRIORITY
may require several restarts before it has scanned enough pages to meet
the high watermark even at 100% efficiency.  This patch irons out the
logic a bit by controlling when priority is raised and removing the
"goto loop_again".

This patch has kswapd raise the scanning priority until it is scanning
enough pages that it could meet the high watermark in one shrink of the
LRU lists if it is able to reclaim at 100% efficiency.  It will not
raise the scanning prioirty higher unless it is failing to reclaim any
pages.

To avoid infinite looping for high-order allocation requests kswapd will
not reclaim for high-order allocations when it has reclaimed at least
twice the number of pages as the allocation request.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:28 -07:00
Mel Gorman e82e0561da mm: vmscan: obey proportional scanning requirements for kswapd
Simplistically, the anon and file LRU lists are scanned proportionally
depending on the value of vm.swappiness although there are other factors
taken into account by get_scan_count().  The patch "mm: vmscan: Limit
the number of pages kswapd reclaims" limits the number of pages kswapd
reclaims but it breaks this proportional scanning and may evenly shrink
anon/file LRUs regardless of vm.swappiness.

This patch preserves the proportional scanning and reclaim.  It does
mean that kswapd will reclaim more than requested but the number of
pages will be related to the high watermark.

[mhocko@suse.cz: Correct proportional reclaim for memcg and simplify]
[kamezawa.hiroyu@jp.fujitsu.com: Recalculate scan based on target]
[hannes@cmpxchg.org: Account for already scanned pages properly]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:28 -07:00
Mel Gorman 75485363ce mm: vmscan: limit the number of pages kswapd reclaims at each priority
This series does not fix all the current known problems with reclaim but
it addresses one important swapping bug when there is background IO.

Changelog since V3
 - Drop the slab shrink changes in light of Glaubers series and
   discussions highlighted that there were a number of potential
   problems with the patch.					(mel)
 - Rebased to 3.10-rc1

Changelog since V2
 - Preserve ratio properly for proportional scanning		(kamezawa)

Changelog since V1
 - Rename ZONE_DIRTY to ZONE_TAIL_LRU_DIRTY			(andi)
 - Reformat comment in shrink_page_list				(andi)
 - Clarify some comments					(dhillf)
 - Rework how the proportional scanning is preserved
 - Add PageReclaim check before kswapd starts writeback
 - Reset sc.nr_reclaimed on every full zone scan

Kswapd and page reclaim behaviour has been screwy in one way or the
other for a long time.  Very broadly speaking it worked in the far past
because machines were limited in memory so it did not have that many
pages to scan and it stalled congestion_wait() frequently to prevent it
going completely nuts.  In recent times it has behaved very
unsatisfactorily with some of the problems compounded by the removal of
stall logic and the introduction of transparent hugepage support with
high-order reclaims.

There are many variations of bugs that are rooted in this area.  One
example is reports of a large copy operations or backup causing the
machine to grind to a halt or applications pushed to swap.  Sometimes in
low memory situations a large percentage of memory suddenly gets
reclaimed.  In other cases an application starts and kswapd hits 100%
CPU usage for prolonged periods of time and so on.  There is now talk of
introducing features like an extra free kbytes tunable to work around
aspects of the problem instead of trying to deal with it.  It's
compounded by the problem that it can be very workload and machine
specific.

This series aims at addressing some of the worst of these problems
without attempting to fundmentally alter how page reclaim works.

Patches 1-2 limits the number of pages kswapd reclaims while still obeying
	the anon/file proportion of the LRUs it should be scanning.

Patches 3-4 control how and when kswapd raises its scanning priority and
	deletes the scanning restart logic which is tricky to follow.

Patch 5 notes that it is too easy for kswapd to reach priority 0 when
	scanning and then reclaim the world. Down with that sort of thing.

Patch 6 notes that kswapd starts writeback based on scanning priority which
	is not necessarily related to dirty pages. It will have kswapd
	writeback pages if a number of unqueued dirty pages have been
	recently encountered at the tail of the LRU.

Patch 7 notes that sometimes kswapd should stall waiting on IO to complete
	to reduce LRU churn and the likelihood that it'll reclaim young
	clean pages or push applications to swap. It will cause kswapd
	to block on IO if it detects that pages being reclaimed under
	writeback are recycling through the LRU before the IO completes.

Patchies 8-9 are cosmetic but balance_pgdat() is easier to follow after they
	are applied.

This was tested using memcached+memcachetest while some background IO
was in progress as implemented by the parallel IO tests implement in MM
Tests.

memcachetest benchmarks how many operations/second memcached can service
and it is run multiple times.  It starts with no background IO and then
re-runs the test with larger amounts of IO in the background to roughly
simulate a large copy in progress.  The expectation is that the IO
should have little or no impact on memcachetest which is running
entirely in memory.

                                        3.10.0-rc1                  3.10.0-rc1
                                           vanilla            lessdisrupt-v4
Ops memcachetest-0M             22155.00 (  0.00%)          22180.00 (  0.11%)
Ops memcachetest-715M           22720.00 (  0.00%)          22355.00 ( -1.61%)
Ops memcachetest-2385M           3939.00 (  0.00%)          23450.00 (495.33%)
Ops memcachetest-4055M           3628.00 (  0.00%)          24341.00 (570.92%)
Ops io-duration-0M                  0.00 (  0.00%)              0.00 (  0.00%)
Ops io-duration-715M               12.00 (  0.00%)              7.00 ( 41.67%)
Ops io-duration-2385M             118.00 (  0.00%)             21.00 ( 82.20%)
Ops io-duration-4055M             162.00 (  0.00%)             36.00 ( 77.78%)
Ops swaptotal-0M                    0.00 (  0.00%)              0.00 (  0.00%)
Ops swaptotal-715M             140134.00 (  0.00%)             18.00 ( 99.99%)
Ops swaptotal-2385M            392438.00 (  0.00%)              0.00 (  0.00%)
Ops swaptotal-4055M            449037.00 (  0.00%)          27864.00 ( 93.79%)
Ops swapin-0M                       0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-715M                     0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-2385M               148031.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-4055M               135109.00 (  0.00%)              0.00 (  0.00%)
Ops minorfaults-0M            1529984.00 (  0.00%)        1530235.00 ( -0.02%)
Ops minorfaults-715M          1794168.00 (  0.00%)        1613750.00 ( 10.06%)
Ops minorfaults-2385M         1739813.00 (  0.00%)        1609396.00 (  7.50%)
Ops minorfaults-4055M         1754460.00 (  0.00%)        1614810.00 (  7.96%)
Ops majorfaults-0M                  0.00 (  0.00%)              0.00 (  0.00%)
Ops majorfaults-715M              185.00 (  0.00%)            180.00 (  2.70%)
Ops majorfaults-2385M           24472.00 (  0.00%)            101.00 ( 99.59%)
Ops majorfaults-4055M           22302.00 (  0.00%)            229.00 ( 98.97%)

Note how the vanilla kernels performance collapses when there is enough
IO taking place in the background.  This drop in performance is part of
what users complain of when they start backups.  Note how the swapin and
major fault figures indicate that processes were being pushed to swap
prematurely.  With the series applied, there is no noticable performance
drop and while there is still some swap activity, it's tiny.

20 iterations of this test were run in total and averaged.  Every 5
iterations, additional IO was generated in the background using dd to
measure how the workload was impacted.  The 0M, 715M, 2385M and 4055M
subblock refer to the amount of IO going on in the background at each
iteration.  So memcachetest-2385M is reporting how many
transactions/second memcachetest recorded on average over 5 iterations
while there was 2385M of IO going on in the ground.  There are six
blocks of information reported here

memcachetest is the transactions/second reported by memcachetest. In
	the vanilla kernel note that performance drops from around
	22K/sec to just under 4K/second when there is 2385M of IO going
	on in the background. This is one type of performance collapse
	users complain about if a large cp or backup starts in the
	background

io-duration refers to how long it takes for the background IO to
	complete. It's showing that with the patched kernel that the IO
	completes faster while not interfering with the memcache
	workload

swaptotal is the total amount of swap traffic. With the patched kernel,
	the total amount of swapping is much reduced although it is
	still not zero.

swapin in this case is an indication as to whether we are swap trashing.
	The closer the swapin/swapout ratio is to 1, the worse the
	trashing is.  Note with the patched kernel that there is no swapin
	activity indicating that all the pages swapped were really inactive
	unused pages.

minorfaults are just minor faults. An increased number of minor faults
	can indicate that page reclaim is unmapping the pages but not
	swapping them out before they are faulted back in. With the
	patched kernel, there is only a small change in minor faults

majorfaults are just major faults in the target workload and a high
	number can indicate that a workload is being prematurely
	swapped. With the patched kernel, major faults are much reduced. As
	there are no swapin's recorded so it's not being swapped. The likely
	explanation is that that libraries or configuration files used by
	the workload during startup get paged out by the background IO.

Overall with the series applied, there is no noticable performance drop
due to background IO and while there is still some swap activity, it's
tiny and the lack of swapins imply that the swapped pages were inactive
and unused.

                            3.10.0-rc1  3.10.0-rc1
                               vanilla lessdisrupt-v4
Page Ins                       1234608      101892
Page Outs                     12446272    11810468
Swap Ins                        283406           0
Swap Outs                       698469       27882
Direct pages scanned                 0      136480
Kswapd pages scanned           6266537     5369364
Kswapd pages reclaimed         1088989      930832
Direct pages reclaimed               0      120901
Kswapd efficiency                  17%         17%
Kswapd velocity               5398.371    4635.115
Direct efficiency                 100%         88%
Direct velocity                  0.000     117.817
Percentage direct scans             0%          2%
Page writes by reclaim         1655843     4009929
Page writes file                957374     3982047
Page writes anon                698469       27882
Page reclaim immediate            5245        1745
Page rescued immediate               0           0
Slabs scanned                    33664       25216
Direct inode steals                  0           0
Kswapd inode steals              19409         778
Kswapd skipped wait                  0           0
THP fault alloc                     35          30
THP collapse alloc                 472         401
THP splits                          27          22
THP fault fallback                   0           0
THP collapse fail                    0           1
Compaction stalls                    0           4
Compaction success                   0           0
Compaction failures                  0           4
Page migrate success                 0           0
Page migrate failure                 0           0
Compaction pages isolated            0           0
Compaction migrate scanned           0           0
Compaction free scanned              0           0
Compaction cost                      0           0
NUMA PTE updates                     0           0
NUMA hint faults                     0           0
NUMA hint local faults               0           0
NUMA pages migrated                  0           0
AutoNUMA cost                        0           0

Unfortunately, note that there is a small amount of direct reclaim due to
kswapd no longer reclaiming the world.  ftrace indicates that the direct
reclaim stalls are mostly harmless with the vast bulk of the stalls
incurred by dd

     23 tclsh-3367
     38 memcachetest-13733
     49 memcachetest-12443
     57 tee-3368
   1541 dd-13826
   1981 dd-12539

A consequence of the direct reclaim for dd is that the processes for the
IO workload may show a higher system CPU usage.  There is also a risk that
kswapd not reclaiming the world may mean that it stays awake balancing
zones, does not stall on the appropriate events and continually scans
pages it cannot reclaim consuming CPU.  This will be visible as continued
high CPU usage but in my own tests I only saw a single spike lasting less
than a second and I did not observe any problems related to reclaim while
running the series on my desktop.

This patch:

The number of pages kswapd can reclaim is bound by the number of pages it
scans which is related to the size of the zone and the scanning priority.
In many cases the priority remains low because it's reset every
SWAP_CLUSTER_MAX reclaimed pages but in the event kswapd scans a large
number of pages it cannot reclaim, it will raise the priority and
potentially discard a large percentage of the zone as sc->nr_to_reclaim is
ULONG_MAX.  The user-visible effect is a reclaim "spike" where a large
percentage of memory is suddenly freed.  It would be bad enough if this
was just unused memory but because of how anon/file pages are balanced it
is possible that applications get pushed to swap unnecessarily.

This patch limits the number of pages kswapd will reclaim to the high
watermark.  Reclaim will still overshoot due to it not being a hard limit
as shrink_lruvec() will ignore the sc.nr_to_reclaim at DEF_PRIORITY but it
prevents kswapd reclaiming the world at higher priorities.  The number of
pages it reclaims is not adjusted for high-order allocations as kswapd
will reclaim excessively if it is to balance zones for high-order
allocations.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:28 -07:00
Cody P Schafer 169f6c1999 mm/page_alloc: don't re-init pageset in zone_pcp_update()
When memory hotplug is triggered, we call pageset_init() on
per-cpu-pagesets which both contain pages and are in use, causing both the
leakage of those pages and (potentially) bad behaviour if a page is
allocated from a pageset while it is being cleared.

Avoid this by factoring out pageset_set_high_and_batch() (which contains
all needed logic too set a pageset's ->high and ->batch inrespective of
system state) from zone_pageset_init() and using the new
pageset_set_high_and_batch() instead of zone_pageset_init() in
zone_pcp_update().

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:27 -07:00
Cody P Schafer 3664033c56 mm/page_alloc: rename setup_pagelist_highmark() to match naming of pageset_set_batch()
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:27 -07:00
Cody P Schafer 737af4c011 mm/page_alloc: in zone_pcp_update(), uze zone_pageset_init()
Previously, zone_pcp_update() called pageset_set_batch() directly,
essentially assuming that percpu_pagelist_fraction == 0.

Correct this by calling zone_pageset_init(), which chooses the
appropriate ->batch and ->high calculations.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:27 -07:00
Cody P Schafer 56cef2b85c mm/page_alloc: factor zone_pageset_init() out of setup_zone_pageset()
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:27 -07:00
Cody P Schafer dd1895e2c5 mm/page_alloc: relocate comment to be directly above code it refers to.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:27 -07:00
Cody P Schafer 88c90dbcca mm/page_alloc: factor setup_pageset() into pageset_init() and pageset_set_batch()
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:27 -07:00
Cody P Schafer 22a7f12b16 mm/page_alloc: when handling percpu_pagelist_fraction, don't unneedly recalulate high
Simply moves calculation of the new 'high' value outside the
for_each_possible_cpu() loop, as it does not depend on the cpu.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:27 -07:00
Cody P Schafer 0a647f3811 mm/page_alloc: convert zone_pcp_update() to rely on memory barriers instead of stop_machine()
zone_pcp_update()'s goal is to adjust the ->high and ->mark members of a
percpu pageset based on a zone's ->managed_pages.  We don't need to drain
the entire percpu pageset just to modify these fields.

This lets us avoid calling setup_pageset() (and the draining required to
call it) and instead allows simply setting the fields' values (with some
attention paid to memory barriers to prevent the relationship between
->batch and ->high from being thrown off).

This does change the behavior of zone_pcp_update() as the percpu pagesets
will not be drained when zone_pcp_update() is called (they will end up
being shrunk, not completely drained, later when a 0-order page is freed
in free_hot_cold_page()).

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:27 -07:00
Cody P Schafer 998d39cb23 mm/page_alloc: protect pcp->batch accesses with ACCESS_ONCE
pcp->batch could change at any point, avoid relying on it being a stable
value.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:27 -07:00
Cody P Schafer 8d7a8fa97a mm/page_alloc: insert memory barriers to allow async update of pcp batch and high
Introduce pageset_update() to perform a safe transision from one set of
pcp->{batch,high} to a new set using memory barriers.

This ensures that batch is always set to a safe value (1) prior to
updating high, and ensure that high is fully updated before setting the
real value of batch.  It avoids ->batch ever rising above ->high.

Suggested by Gilad Ben-Yossef in these threads:

	https://lkml.org/lkml/2013/4/9/23
	https://lkml.org/lkml/2013/4/10/49

Also reproduces his proposed comment.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Reviewed-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:27 -07:00
Cody P Schafer c8e251fadc mm/page_alloc: prevent concurrent updaters of pcp ->batch and ->high
Because we are going to rely upon a careful transision between old and new
->high and ->batch values using memory barriers and will remove
stop_machine(), we need to prevent multiple updaters from interweaving
their memory writes.

Add a simple mutex to protect both update loops.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:26 -07:00
Cody P Schafer 4008bab7b3 mm/page_alloc: factor out setting of pcp->high and pcp->batch
"Problems" with the current code:

1: there is a lack of synchronization in setting ->high and ->batch in
   percpu_pagelist_fraction_sysctl_handler()

2: stop_machine() in zone_pcp_update() is unnecissary.

3: zone_pcp_update() does not consider the case where
   percpu_pagelist_fraction is non-zero

To fix:

1: add memory barriers, a safe ->batch value, an update side mutex when
   updating ->high and ->batch, and use ACCESS_ONCE() for ->batch users
   that expect a stable value.

2: avoid draining pages in zone_pcp_update(), rely upon the memory
   barriers added to fix #1

3: factor out quite a few functions, and then call the appropriate one.

Note that it results in a change to the behavior of zone_pcp_update(),
which is used by memory_hotplug.  I'm rather certain that I've diserned
(and preserved) the essential behavior (changing ->high and ->batch), and
only eliminated unneeded actions (draining the per cpu pages), but this
may not be the case.

Further note that the draining of pages that previously took place in
zone_pcp_update() occured after repeated draining when attempting to
offline a page, and after the offline has "succeeded".  It appears that
the draining was added to zone_pcp_update() to avoid refactoring
setup_pageset() into 2 funtions.

This patch:

Creates pageset_set_batch() for use in setup_pageset().
pageset_set_batch() imitates the functionality of
setup_pagelist_highmark(), but uses the boot time
(percpu_pagelist_fraction == 0) calculations for determining ->high based
on ->batch.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:26 -07:00
Libin d6e9321770 mm: use vma_pages() to replace (vm_end - vm_start) >> PAGE_SHIFT
(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented
as a inline funcion vma_pages() in linux/mm.h, so using it.

Signed-off-by: Libin <huawei.libin@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:26 -07:00
Minchan Kim b430e9d1c6 mm: remove compressed copy from zram in-memory
Swap subsystem does lazy swap slot free with expecting the page would be
swapped out again so we can avoid unnecessary write.

But the problem in in-memory swap(ex, zram) is that it consumes memory
space until vm_swap_full(ie, used half of all of swap device) condition
meet.  It could be bad if we use multiple swap device, small in-memory
swap and big storage swap or in-memory swap alone.

This patch makes swap subsystem free swap slot as soon as swap-read is
completed and make the swapcache page dirty so the page should be
written out the swap device to reclaim it.  It means we never lose it.

I tested this patch with kernel compile workload.

1. before

   compile time : 9882.42
   zram max wasted space by fragmentation: 13471881 byte
   memory space consumed by zram: 174227456 byte
   the number of slot free notify: 206684

2. after

   compile time : 9653.90
   zram max wasted space by fragmentation: 11805932 byte
   memory space consumed by zram: 154001408 byte
   the number of slot free notify: 426972

[akpm@linux-foundation.org: tweak comment text]
[artem.savkov@gmail.com: fix BUG due to non-swapcache pages in end_swap_bio_read()]
[akpm@linux-foundation.org: invert unlikely() test, augment comment, 80-col cleanup]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Artem Savkov <artem.savkov@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Konrad Rzeszutek Wilk <konrad@darnok.org>
Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:26 -07:00
David Rientjes ffbdccf5e1 mm, memcg: don't take task_lock in task_in_mem_cgroup
For processes that have detached their mm's, task_in_mem_cgroup()
unnecessarily takes task_lock() when rcu_read_lock() is all that is
necessary to call mem_cgroup_from_task().

While we're here, switch task_in_mem_cgroup() to return bool.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:26 -07:00
Pavel Emelyanov 0f8975ec4d mm: soft-dirty bits for user memory changes tracking
The soft-dirty is a bit on a PTE which helps to track which pages a task
writes to.  In order to do this tracking one should

  1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs)
  2. Wait some time.
  3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries)

To do this tracking, the writable bit is cleared from PTEs when the
soft-dirty bit is.  Thus, after this, when the task tries to modify a
page at some virtual address the #PF occurs and the kernel sets the
soft-dirty bit on the respective PTE.

Note, that although all the task's address space is marked as r/o after
the soft-dirty bits clear, the #PF-s that occur after that are processed
fast.  This is so, since the pages are still mapped to physical memory,
and thus all the kernel does is finds this fact out and puts back
writable, dirty and soft-dirty bits on the PTE.

Another thing to note, is that when mremap moves PTEs they are marked
with soft-dirty as well, since from the user perspective mremap modifies
the virtual memory at mremap's new address.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:26 -07:00
Linus Torvalds f991fae5c6 Power management and ACPI updates for 3.11-rc1
- Hotplug changes allowing device hot-removal operations to fail
   gracefully (instead of crashing the kernel) if they cannot be
   carried out completely.  From Rafael J Wysocki and Toshi Kani.
 
 - Freezer update from Colin Cross and Mandeep Singh Baines targeted
   at making the freezing of tasks a bit less heavy weight operation.
 
 - cpufreq resume fix from Srivatsa S Bhat for a regression introduced
   during the 3.10 cycle causing some cpufreq sysfs attributes to
   return wrong values to user space after resume.
 
 - New freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to
   provide information previously available via related_cpus from
   Lan Tianyu.
 
 - cpufreq fixes and cleanups from Viresh Kumar, Jacob Shin,
   Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and
   Tang Yuantian.
 
 - Fix for an ACPICA regression causing suspend/resume issues to
   appear on some systems introduced during the 3.4 development cycle
   from Lv Zheng.
 
 - ACPICA fixes and cleanups from Bob Moore, Tomasz Nowicki, Lv Zheng,
   Chao Guan, and Zhang Rui.
 
 - New cupidle driver for Xilinx Zynq processors from Michal Simek.
 
 - cpuidle fixes and cleanups from Daniel Lezcano.
 
 - Changes to make suspend/resume work correctly in Xen guests from
   Konrad Rzeszutek Wilk.
 
 - ACPI device power management fixes and cleanups from Fengguang Wu
   and Rafael J Wysocki.
 
 - ACPI documentation updates from Lv Zheng, Aaron Lu and Hanjun Guo.
 
 - Fix for the IA-64 issue that was the reason for reverting commit
   9f29ab1 and updates of the ACPI scan code from Rafael J Wysocki.
 
 - Mechanism for adding CMOS RTC address space handlers from Lan Tianyu
   (to allow some EC-related breakage to be fixed on some systems).
 
 - Spec-compliant implementation of acpi_os_get_timer() from
   Mika Westerberg.
 
 - Modification of do_acpi_find_child() to execute _STA in order to
   to avoid situations in which a pointer to a disabled device object
   is returned instead of an enabled one with the same _ADR value.
   From Jeff Wu.
 
 - Intel BayTrail PCH (Platform Controller Hub) support for the ACPI
   Intel Low-Power Subsystems (LPSS) driver and modificaions of that
   driver to work around a couple of known BIOS issues from
   Mika Westerberg and Heikki Krogerus.
 
 - EC driver fix from Vasiliy Kulikov to make it use get_user() and
   put_user() instead of dereferencing user space pointers blindly.
 
 - Assorted ACPI code cleanups from Bjorn Helgaas, Nicholas Mazzuca and
   Toshi Kani.
 
 - Modification of the "runtime idle" helper routine to take the return
   values of the callbacks executed by it into account and to call
   rpm_suspend() if they return 0, which allows some code bloat
   reduction to be done, from Rafael J Wysocki and Alan Stern.
 
 - New trace points for PM QoS from Sahara <keun-o.park@windriver.com>.
 
 - PM QoS documentation update from Lan Tianyu.
 
 - Assorted core PM code cleanups and changes from Bernie Thompson,
   Bjorn Helgaas, Julius Werner, and Shuah Khan.
 
 - New devfreq driver for the Exynos5-bus device from Abhilash Kesavan.
 
 - Minor devfreq cleanups, fixes and MAINTAINERS update from
   MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and
   Wei Yongjun.
 
 - OMAP Adaptive Voltage Scaling (AVS) SmartReflex voltage control
   driver updates from Andrii Tseglytskyi and Nishanth Menon.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0ZNOAAoJEKhOf7ml8uNsDLYP/0EU4rmvw0TWTITfp6RS1KDE
 9GwBn96ZR4Q5bJd9gBCTPSqhHOYMqxWEUp99sn/M2wehG1pk/jw5LO56+2IhM3UZ
 g1HDcJ7te2nVT/iXsKiAGTVhU9Rk0aYwoVSknwk27qpIBGxW9w/s5tLX8pY3Q3Zq
 wL/7aTPjyL+PFFFEaxgH7qLqsl3DhbtYW5AriUBTkXout/tJ4eO1b7MNBncLDh8X
 VQ/0DNCKE95VEJfkO4rk9RKUyVp9GDn0i+HXCD/FS4IA5oYzePdVdNDmXf7g+swe
 CGlTZq8pB+oBpDiHl4lxzbNrKQjRNbGnDUkoRcWqn0nAw56xK+vmYnWJhW99gQ/I
 fKnvxeLca5po1aiqmC4VSJxZIatFZqLrZAI4dzoCLWY+bGeTnCKmj0/F8ytFnZA2
 8IuLLs7/dFOaHXV/pKmpg6FAlFa9CPxoqRFoyqb4M0GjEarADyalXUWsPtG+6xCp
 R/p0CISpwk+guKZR/qPhL7M654S7SHrPwd2DPF0KgGsvk+G2GhoB8EzvD8BVp98Z
 9siCGCdgKQfJQVI6R0k9aFmn/4gRQIAgyPhkhv9tqULUUkiaXki+/t8kPfnb8O/d
 zep+CA57E2G8MYLkDJfpFeKS7GpPD6TIdgFdGmOUC0Y6sl9iTdiw4yTx8O2JM37z
 rHBZfYGkJBrbGRu+Q1gs
 =VBBq
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "This time the total number of ACPI commits is slightly greater than
  the number of cpufreq commits, but Viresh Kumar (who works on cpufreq)
  remains the most active patch submitter.

  To me, the most significant change is the addition of offline/online
  device operations to the driver core (with the Greg's blessing) and
  the related modifications of the ACPI core hotplug code.  Next are the
  freezer updates from Colin Cross that should make the freezing of
  tasks a bit less heavy weight.

  We also have a couple of regression fixes, a number of fixes for
  issues that have not been identified as regressions, two new drivers
  and a bunch of cleanups all over.

  Highlights:

   - Hotplug changes to support graceful hot-removal failures.

     It sometimes is necessary to fail device hot-removal operations
     gracefully if they cannot be carried out completely.  For example,
     if memory from a memory module being hot-removed has been allocated
     for the kernel's own use and cannot be moved elsewhere, it's
     desirable to fail the hot-removal operation in a graceful way
     rather than to crash the kernel, but currenty a success or a kernel
     crash are the only possible outcomes of an attempted memory
     hot-removal.  Needless to say, that is not a very attractive
     alternative and it had to be addressed.

     However, in order to make it work for memory, I first had to make
     it work for CPUs and for this purpose I needed to modify the ACPI
     processor driver.  It's been split into two parts, a resident one
     handling the low-level initialization/cleanup and a modular one
     playing the actual driver's role (but it binds to the CPU system
     device objects rather than to the ACPI device objects representing
     processors).  That's been sort of like a live brain surgery on a
     patient who's riding a bike.

     So this is a little scary, but since we found and fixed a couple of
     regressions it caused to happen during the early linux-next testing
     (a month ago), nobody has complained.

     As a bonus we remove some duplicated ACPI hotplug code, because the
     ACPI-based CPU hotplug is now going to use the common ACPI hotplug
     code.

   - Lighter weight freezing of tasks.

     These changes from Colin Cross and Mandeep Singh Baines are
     targeted at making the freezing of tasks a bit less heavy weight
     operation.  They reduce the number of tasks woken up every time
     during the freezing, by using the observation that the freezer
     simply doesn't need to wake up some of them and wait for them all
     to call refrigerator().  The time needed for the freezer to decide
     to report a failure is reduced too.

     Also reintroduced is the check causing a lockdep warining to
     trigger when try_to_freeze() is called with locks held (which is
     generally unsafe and shouldn't happen).

   - cpufreq updates

     First off, a commit from Srivatsa S Bhat fixes a resume regression
     introduced during the 3.10 cycle causing some cpufreq sysfs
     attributes to return wrong values to user space after resume.  The
     fix is kind of fresh, but also it's pretty obvious once Srivatsa
     has identified the root cause.

     Second, we have a new freqdomain_cpus sysfs attribute for the
     acpi-cpufreq driver to provide information previously available via
     related_cpus.  From Lan Tianyu.

     Finally, we fix a number of issues, mostly related to the
     CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean
     up some code.  The majority of changes from Viresh Kumar with bits
     from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia,
     Arnd Bergmann, and Tang Yuantian.

   - ACPICA update

     A usual bunch of updates from the ACPICA upstream.

     During the 3.4 cycle we introduced support for ACPI 5 extended
     sleep registers, but they are only supposed to be used if the
     HW-reduced mode bit is set in the FADT flags and the code attempted
     to use them without checking that bit.  That caused suspend/resume
     regressions to happen on some systems.  Fix from Lv Zheng causes
     those registers to be used only if the HW-reduced mode bit is set.

     Apart from this some other ACPICA bugs are fixed and code cleanups
     are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and
     Zhang Rui.

   - cpuidle updates

     New driver for Xilinx Zynq processors is added by Michal Simek.

     Multidriver support simplification, addition of some missing
     kerneldoc comments and Kconfig-related fixes come from Daniel
     Lezcano.

   - ACPI power management updates

     Changes to make suspend/resume work correctly in Xen guests from
     Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and
     cleanups and fixes of the ACPI device power state selection
     routine.

   - ACPI documentation updates

     Some previously missing pieces of ACPI documentation are added by
     Lv Zheng and Aaron Lu (hopefully, that will help people to
     uderstand how the ACPI subsystem works) and one outdated doc is
     updated by Hanjun Guo.

   - Assorted ACPI updates

     We finally nailed down the IA-64 issue that was the reason for
     reverting commit 9f29ab11dd ("ACPI / scan: do not match drivers
     against objects having scan handlers"), so we can fix it and move
     the ACPI scan handler check added to the ACPI video driver back to
     the core.

     A mechanism for adding CMOS RTC address space handlers is
     introduced by Lan Tianyu to allow some EC-related breakage to be
     fixed on some systems.

     A spec-compliant implementation of acpi_os_get_timer() is added by
     Mika Westerberg.

     The evaluation of _STA is added to do_acpi_find_child() to avoid
     situations in which a pointer to a disabled device object is
     returned instead of an enabled one with the same _ADR value.  From
     Jeff Wu.

     Intel BayTrail PCH (Platform Controller Hub) support is added to
     the ACPI driver for Intel Low-Power Subsystems (LPSS) and that
     driver is modified to work around a couple of known BIOS issues.
     Changes from Mika Westerberg and Heikki Krogerus.

     The EC driver is fixed by Vasiliy Kulikov to use get_user() and
     put_user() instead of dereferencing user space pointers blindly.

     Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi
     Kani.

   - Assorted power management updates

     The "runtime idle" helper routine is changed to take the return
     values of the callbacks executed by it into account and to call
     rpm_suspend() if they return 0, which allows us to reduce the
     overall code bloat a bit (by dropping some code that's not
     necessary any more after that modification).

     The runtime PM documentation is updated by Alan Stern (to reflect
     the "runtime idle" behavior change).

     New trace points for PM QoS are added by Sahara
     (<keun-o.park@windriver.com>).

     PM QoS documentation is updated by Lan Tianyu.

     Code cleanups are made and minor issues are addressed by Bernie
     Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan.

   - devfreq updates

     New driver for the Exynos5-bus device from Abhilash Kesavan.

     Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham,
     Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun.

   - OMAP power management updates

     Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver
     updates from Andrii Tseglytskyi and Nishanth Menon."

* tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits)
  cpufreq: Fix cpufreq regression after suspend/resume
  ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state()
  PM / Sleep: Warn about system time after resume with pm_trace
  cpufreq: don't leave stale policy pointer in cdbs->cur_policy
  acpi-cpufreq: Add new sysfs attribute freqdomain_cpus
  cpufreq: make sure frequency transitions are serialized
  ACPI: implement acpi_os_get_timer() according the spec
  ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan
  ACPI: Add CMOS RTC Operation Region handler support
  ACPI / processor: Drop unused variable from processor_perflib.c
  cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases
  ...
2013-07-03 14:35:40 -07:00
Linus Torvalds f39d420f67 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "In this update, Smack learns to love IPv6 and to mount a filesystem
  with a transmutable hierarchy (i.e.  security labels are inherited
  from parent directory upon creation rather than creating process).

  The rest of the changes are maintenance"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (37 commits)
  tpm/tpm_i2c_infineon: Remove unused header file
  tpm: tpm_i2c_infinion: Don't modify i2c_client->driver
  evm: audit integrity metadata failures
  integrity: move integrity_audit_msg()
  evm: calculate HMAC after initializing posix acl on tmpfs
  maintainers:  add Dmitry Kasatkin
  Smack: Fix the bug smackcipso can't set CIPSO correctly
  Smack: Fix possible NULL pointer dereference at smk_netlbl_mls()
  Smack: Add smkfstransmute mount option
  Smack: Improve access check performance
  Smack: Local IPv6 port based controls
  tpm: fix regression caused by section type conflict of tpm_dev_release() in ppc builds
  maintainers: Remove Kent from maintainers
  tpm: move TPM_DIGEST_SIZE defintion
  tpm_tis: missing platform_driver_unregister() on error in init_tis()
  security: clarify cap_inode_getsecctx description
  apparmor: no need to delay vfree()
  apparmor: fix fully qualified name parsing
  apparmor: fix setprocattr arg processing for onexec
  apparmor: localize getting the security context to a few macros
  ...
2013-07-03 14:04:58 -07:00
Linus Torvalds 1873e50028 Main features:
- KVM and Xen ports to AArch64
 - Hugetlbfs and transparent huge pages support for arm64
 - Applied Micro X-Gene Kconfig entry and dts file
 - Cache flushing improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.9 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0bZAAAoJEGvWsS0AyF7xTEEP/R/aRoqWwbVAMlwAhujq616O
 t4RzIyBXZXqxS9I+raokCX4mgYxdeisJlzN2hoq73VEX2BQlXZoYh8vmfY9WeNSM
 2pdfif2HF7oo9ymCRyqfuhbumPrTyJhpbguzOYrxPqpp2f1hv2D8hbUJEFj429yL
 UjqTFoONngfouZmAlwrPGZQKhBI95vvN53yvDMH0PWfvpm07DKGIQMYp20y0pj8j
 slhLH3bh2kfpS1cf23JtH6IICwWD2pXW0POo569CfZry6bI74xve+Trcsm7iPnsO
 PSI1P046ME1mu3SBbKwiPIdN/FQqWwTHW07fvMmH/xuXu3Zs/mxgzi7vDzDrVvTg
 PJSbKWD6N/IPPwKS/gCUmWWDASO0bXx3KlDuRZqAjbRojs0UPUOTUhzJM/BHUms1
 vY2QS9lAm02LmZZrk1LeKKP85gB+qKQvHuOVhIOldWeLGKtsNufz1kynz6YTqsLq
 uUB55KwbhQ7q8+aoY6lWujqiTXMoLkBgGdjHs2I407PAv7ZjlhRWk2fIry7xJifp
 rKu2cIlWsRe4CGvGI410NvIJFrGvJAV4wA43sgBDjPumyILgT/5jw9r3RpJEBZZs
 akw/Bl1CbL+gMjyoPUWgcWZdRkUCE0eLrgyMOmaYfst8cOTaWw4dWLvUG/bBZg+Y
 mGnuEQUQtAPadk8P/Sv3
 =PZ/e
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64

Pull ARM64 updates from Catalin Marinas:
 "Main features:
   - KVM and Xen ports to AArch64
   - Hugetlbfs and transparent huge pages support for arm64
   - Applied Micro X-Gene Kconfig entry and dts file
   - Cache flushing improvements

  For arm64 huge pages support, there are x86 changes moving part of
  arch/x86/mm/hugetlbpage.c into mm/hugetlb.c to be re-used by arm64"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (66 commits)
  arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board
  arm64: Add defines for APM ARMv8 implementation
  arm64: Enable APM X-Gene SOC family in the defconfig
  arm64: Add Kconfig option for APM X-Gene SOC family
  arm64/Makefile: provide vdso_install target
  ARM64: mm: THP support.
  ARM64: mm: Raise MAX_ORDER for 64KB pages and THP.
  ARM64: mm: HugeTLB support.
  ARM64: mm: Move PTE_PROT_NONE bit.
  ARM64: mm: Make PAGE_NONE pages read only and no-execute.
  ARM64: mm: Restore memblock limit when map_mem finished.
  mm: thp: Correct the HPAGE_PMD_ORDER check.
  x86: mm: Remove general hugetlb code from x86.
  mm: hugetlb: Copy general hugetlb code from x86 to mm.
  x86: mm: Remove x86 version of huge_pmd_share.
  mm: hugetlb: Copy huge_pmd_share from x86 to mm.
  arm64: KVM: document kernel object mappings in HYP
  arm64: KVM: MAINTAINERS update
  arm64: KVM: userspace API documentation
  arm64: KVM: enable initialization of a 32bit vcpu
  ...
2013-07-03 10:31:38 -07:00
Linus Torvalds 790eac5640 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull second set of VFS changes from Al Viro:
 "Assorted f_pos race fixes, making do_splice_direct() safe to call with
  i_mutex on parent, O_TMPFILE support, Jeff's locks.c series,
  ->d_hash/->d_compare calling conventions changes from Linus, misc
  stuff all over the place."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  Document ->tmpfile()
  ext4: ->tmpfile() support
  vfs: export lseek_execute() to modules
  lseek_execute() doesn't need an inode passed to it
  block_dev: switch to fixed_size_llseek()
  cpqphp_sysfs: switch to fixed_size_llseek()
  tile-srom: switch to fixed_size_llseek()
  proc_powerpc: switch to fixed_size_llseek()
  ubi/cdev: switch to fixed_size_llseek()
  pci/proc: switch to fixed_size_llseek()
  isapnp: switch to fixed_size_llseek()
  lpfc: switch to fixed_size_llseek()
  locks: give the blocked_hash its own spinlock
  locks: add a new "lm_owner_key" lock operation
  locks: turn the blocked_list into a hashtable
  locks: convert fl_link to a hlist_node
  locks: avoid taking global lock if possible when waking up blocked waiters
  locks: protect most of the file_lock handling with i_lock
  locks: encapsulate the fl_link list handling
  locks: make "added" in __posix_lock_file a bool
  ...
2013-07-03 09:10:19 -07:00
Jie Liu 46a1c2c7ae vfs: export lseek_execute() to modules
For those file systems(btrfs/ext4/ocfs2/tmpfs) that support
SEEK_DATA/SEEK_HOLE functions, we end up handling the similar
matter in lseek_execute() to update the current file offset
to the desired offset if it is valid, ceph also does the
simliar things at ceph_llseek().

To reduce the duplications, this patch make lseek_execute()
public accessible so that we can call it directly from the
underlying file systems.

Thanks Dave Chinner for this suggestion.

[AV: call it vfs_setpos(), don't bring the removed 'inode' argument back]

v2->v1:
- Add kernel-doc comments for lseek_execute()
- Call lseek_execute() in ceph->llseek()

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Cc: Ben Myers <bpm@sgi.com>
Cc: Ted Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-03 16:23:27 +04:00
Linus Torvalds e13053f506 Merge branch 'sched-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull voluntary preemption fixes from Ingo Molnar:
 "This tree contains a speedup which is achieved through better
  might_sleep()/might_fault() preemption point annotations for uaccess
  functions, by Michael S Tsirkin:

  1. The only reason uaccess routines might sleep is if they fault.
     Make this explicit for all architectures.

  2. A voluntary preemption point in uaccess functions means compiler
     can't inline them efficiently, this breaks assumptions that they
     are very fast and small that e.g.  net code seems to make.  Remove
     this preemption point so behaviour matches with what callers
     assume.

  3. Accesses (e.g through socket ops) to kernel memory with KERNEL_DS
     like net/sunrpc does will never sleep.  Remove an unconditinal
     might_sleep() in the might_fault() inline in kernel.h (used when
     PROVE_LOCKING is not set).

  4. Accesses with pagefault_disable() return EFAULT but won't cause
     caller to sleep.  Check for that and thus avoid might_sleep() when
     PROVE_LOCKING is set.

  These changes offer a nice speedup for CONFIG_PREEMPT_VOLUNTARY=y
  kernels, here's a network bandwidth measurement between a virtual
  machine and the host:

   before:
        incoming: 7122.77   Mb/s
        outgoing: 8480.37   Mb/s

   after:
        incoming: 8619.24   Mb/s   [ +21.0% ]
        outgoing: 9455.42   Mb/s   [ +11.5% ]

  I kept these changes in a separate tree, separate from scheduler
  changes, because it's a mixed MM and scheduler topic"

* 'sched-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm, sched: Allow uaccess in atomic with pagefault_disable()
  mm, sched: Drop voluntary schedule from might_fault()
  x86: uaccess s/might_sleep/might_fault/
  tile: uaccess s/might_sleep/might_fault/
  powerpc: uaccess s/might_sleep/might_fault/
  mn10300: uaccess s/might_sleep/might_fault/
  microblaze: uaccess s/might_sleep/might_fault/
  m32r: uaccess s/might_sleep/might_fault/
  frv: uaccess s/might_sleep/might_fault/
  arm64: uaccess s/might_sleep/might_fault/
  asm-generic: uaccess s/might_sleep/might_fault/
2013-07-02 16:19:24 -07:00
Linus Torvalds 3e42dee676 Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking changes from Ingo Molnar:
 "Four miscellanous standalone fixes for futexes, rtmutexes and
  Kconfig.locks."

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Use freezable blocking call
  futex: Take hugepages into account when generating futex_key
  rtmutex: Document rt_mutex_adjust_prio_chain()
  locking: Fix copy/paste errors of "ARCH_INLINE_*_UNLOCK_BH"
2013-07-02 16:07:52 -07:00
Linus Torvalds fc76a258d4 Driver core patches for 3.11-rc1
Here's the big driver core merge for 3.11-rc1
 
 Lots of little things, and larger firmware subsystem updates, all
 described in the shortlog.  Nice thing here is that we finally get rid
 of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
 been always on for a number of kernel releases, now it's just removed.)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlHRsGMACgkQMUfUDdst+ylIIACfW8lLxOPVK+iYG699TWEBAkp0
 LFEAnjlpAMJ1JnoZCuWDZObNCev93zGB
 =020+
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here's the big driver core merge for 3.11-rc1

  Lots of little things, and larger firmware subsystem updates, all
  described in the shortlog.  Nice thing here is that we finally get rid
  of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
  been always on for a number of kernel releases, now it's just
  removed)"

* tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
  driver core: device.h: fix doc compilation warnings
  firmware loader: fix another compile warning with PM_SLEEP unset
  build some drivers only when compile-testing
  firmware loader: fix compile warning with PM_SLEEP set
  kobject: sanitize argument for format string
  sysfs_notify is only possible on file attributes
  firmware loader: simplify holding module for request_firmware
  firmware loader: don't export cache_firmware and uncache_firmware
  drivers/base: Use attribute groups to create sysfs memory files
  firmware loader: fix compile warning
  firmware loader: fix build failure with !CONFIG_FW_LOADER_USER_HELPER
  Documentation: Updated broken link in HOWTO
  Finally eradicate CONFIG_HOTPLUG
  driver core: firmware loader: kill FW_ACTION_NOHOTPLUG requests before suspend
  driver core: firmware loader: don't cache FW_ACTION_NOHOTPLUG firmware
  Documentation: Tidy up some drivers/base/core.c kerneldoc content.
  platform_device: use a macro instead of platform_driver_register
  firmware: move EXPORT_SYMBOL annotations
  firmware: Avoid deadlock of usermodehelper lock at shutdown
  dell_rbu: Select CONFIG_FW_LOADER_USER_HELPER explicitly
  ...
2013-07-02 11:44:19 -07:00
Linus Torvalds 9e239bb939 Lots of bug fixes, cleanups and optimizations. In the bug fixes
category, of note is a fix for on-line resizing file systems where the
 block size is smaller than the page size (i.e., file systems 1k blocks
 on x86, or more interestingly file systems with 4k blocks on Power or
 ia64 systems.)
 
 In the cleanup category, the ext4's punch hole implementation was
 significantly improved by Lukas Czerner, and now supports bigalloc
 file systems.  In addition, Jan Kara significantly cleaned up the
 write submission code path.  We also improved error checking and added
 a few sanity checks.
 
 In the optimizations category, two major optimizations deserve
 mention.  The first is that ext4_writepages() is now used for
 nodelalloc and ext3 compatibility mode.  This allows writes to be
 submitted much more efficiently as a single bio request, instead of
 being sent as individual 4k writes into the block layer (which then
 relied on the elevator code to coalesce the requests in the block
 queue).  Secondly, the extent cache shrink mechanism, which was
 introduce in 3.9, no longer has a scalability bottleneck caused by the
 i_es_lru spinlock.  Other optimizations include some changes to reduce
 CPU usage and to avoid issuing empty commits unnecessarily.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJR0XhgAAoJENNvdpvBGATwMXkQAJwTPk5XYLqtAwLziFLvM6wG
 0tWa1QAzTNo80tLyM9iGqI6x74X5nddLw5NMICUmPooOa9agMuA4tlYVSss5jWzV
 yyB7vLzsc/2eZJusuVqfTKrdGybE+M766OI6VO9WodOoIF1l51JXKjktKeaWegfv
 NkcLKlakD4V+ZASEDB/cOcR/lTwAs9dQ89AZzgPiW+G8Do922QbqkENJB8mhalbg
 rFGX+lu9W0f3fqdmT3Xi8KGn3EglETdVd6jU7kOZN4vb5LcF5BKHQnnUmMlpeWMT
 ksOVasb3RZgcsyf5ZOV5feXV601EsNtPBrHAmH22pWQy3rdTIvMv/il63XlVUXZ2
 AXT3cHEvNQP0/yVaOTCZ9xQVxT8sL4mI6kENP9PtNuntx7E90JBshiP5m24kzTZ/
 zkIeDa+FPhsDx1D5EKErinFLqPV8cPWONbIt/qAgo6663zeeIyMVhzxO4resTS9k
 U2QEztQH+hDDbjgABtz9M/GjSrohkTYNSkKXzhTjqr/m5huBrVMngjy/F4/7G7RD
 vSEx5aXqyagnrUcjsupx+biJ1QvbvZWOVxAE/6hNQNRGDt9gQtHAmKw1eG2mugHX
 +TFDxodNE4iWEURenkUxXW3mDx7hFbGZR0poHG3M/LVhKMAAAw0zoKrrUG5c70G7
 XrddRLGlk4Hf+2o7/D7B
 =SwaI
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 update from Ted Ts'o:
 "Lots of bug fixes, cleanups and optimizations.  In the bug fixes
  category, of note is a fix for on-line resizing file systems where the
  block size is smaller than the page size (i.e., file systems 1k blocks
  on x86, or more interestingly file systems with 4k blocks on Power or
  ia64 systems.)

  In the cleanup category, the ext4's punch hole implementation was
  significantly improved by Lukas Czerner, and now supports bigalloc
  file systems.  In addition, Jan Kara significantly cleaned up the
  write submission code path.  We also improved error checking and added
  a few sanity checks.

  In the optimizations category, two major optimizations deserve
  mention.  The first is that ext4_writepages() is now used for
  nodelalloc and ext3 compatibility mode.  This allows writes to be
  submitted much more efficiently as a single bio request, instead of
  being sent as individual 4k writes into the block layer (which then
  relied on the elevator code to coalesce the requests in the block
  queue).  Secondly, the extent cache shrink mechanism, which was
  introduce in 3.9, no longer has a scalability bottleneck caused by the
  i_es_lru spinlock.  Other optimizations include some changes to reduce
  CPU usage and to avoid issuing empty commits unnecessarily."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
  ext4: optimize starting extent in ext4_ext_rm_leaf()
  jbd2: invalidate handle if jbd2_journal_restart() fails
  ext4: translate flag bits to strings in tracepoints
  ext4: fix up error handling for mpage_map_and_submit_extent()
  jbd2: fix theoretical race in jbd2__journal_restart
  ext4: only zero partial blocks in ext4_zero_partial_blocks()
  ext4: check error return from ext4_write_inline_data_end()
  ext4: delete unnecessary C statements
  ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()
  jbd2: move superblock checksum calculation to jbd2_write_superblock()
  ext4: pass inode pointer instead of file pointer to punch hole
  ext4: improve free space calculation for inline_data
  ext4: reduce object size when !CONFIG_PRINTK
  ext4: improve extent cache shrink mechanism to avoid to burn CPU time
  ext4: implement error handling of ext4_mb_new_preallocation()
  ext4: fix corruption when online resizing a fs with 1K block size
  ext4: delete unused variables
  ext4: return FIEMAP_EXTENT_UNKNOWN for delalloc extents
  jbd2: remove debug dependency on debug_fs and update Kconfig help text
  jbd2: use a single printk for jbd_debug()
  ...
2013-07-02 09:39:34 -07:00
Benjamin Herrenschmidt 24a72acac1 Linux 3.10
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJR0K2gAAoJEHm+PkMAQRiGWsEH+gMZSN1qRm34hZ82q1Tx7HvL
 Eb/Gsl3Qw/7G2TlTqgjBUs36IdqV9O2cui/aa3/TfXvdvrx+0GlhRkEwQPc+ygcO
 Mvoyoke4tT4+4jVFdCg1J8avREsa28/6oaHs0ZZxuVmJBBLTJH7aXaNsGn6eU1q9
 9+p798MQis6naIiPC63somlZcCIiBhsuWCPWpEfLMn8G1HWAFTM3xXIbNBqe/brS
 bmIOfhomlIZ5dcdaXGvjtP3+KJhkNDwhkPC4tVYu8JqqgSlrE+a+EGyEuuGqKk10
 U+swiqyuD31uBI9ga54u/2FzSqDiAu6YOcMXevjo/m3g9XLdYbYLvN+nvN8alCQ=
 =Ob6Z
 -----END PGP SIGNATURE-----

Merge tag 'v3.10' into next

Merge 3.10 in order to get some of the last minute powerpc
changes, resolve conflicts and add additional fixes on top
of them.
2013-07-01 17:57:25 +10:00
Al Viro 60545d0d46 [O_TMPFILE] it's still short a few helpers, but infrastructure should be OK now...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29 12:57:10 +04:00
Geert Uytterhoeven 83a35e3604 treewide: relase -> release
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-06-28 14:34:33 +02:00
Rafael J. Wysocki a204dbc61b Merge branch 'acpi-hotplug'
* acpi-hotplug:
  ACPI: Do not use CONFIG_ACPI_HOTPLUG_MEMORY_MODULE
  ACPI / cpufreq: Add ACPI processor device IDs to acpi-cpufreq
  Memory hotplug: Move alternative function definitions to header
  ACPI / processor: Fix potential NULL pointer dereference in acpi_processor_add()
  Memory hotplug / ACPI: Simplify memory removal
  ACPI / scan: Add second pass of companion offlining to hot-remove code
  Driver core / MM: Drop offline_memory_block()
  ACPI / processor: Pass processor object handle to acpi_bind_one()
  ACPI: Drop removal_type field from struct acpi_device
  Driver core / memory: Simplify __memory_block_change_state()
  ACPI / processor: Initialize per_cpu(processors, pr->id) properly
  CPU: Fix sysfs cpu/online of offlined CPUs
  Driver core: Introduce offline/online callbacks for memory blocks
  ACPI / memhotplug: Bind removable memory blocks to ACPI device nodes
  ACPI / processor: Use common hotplug infrastructure
  ACPI / hotplug: Use device offline/online for graceful hot-removal
  Driver core: Use generic offline/online for CPU offline/online
  Driver core: Add offline/online device operations
2013-06-28 12:58:05 +02:00
Zhang Yi 13d60f4b6a futex: Take hugepages into account when generating futex_key
The futex_keys of process shared futexes are generated from the page
offset, the mapping host and the mapping index of the futex user space
address. This should result in an unique identifier for each futex.

Though this is not true when futexes are located in different subpages
of an hugepage. The reason is, that the mapping index for all those
futexes evaluates to the index of the base page of the hugetlbfs
mapping. So a futex at offset 0 of the hugepage mapping and another
one at offset PAGE_SIZE of the same hugepage mapping have identical
futex_keys. This happens because the futex code blindly uses
page->index.

Steps to reproduce the bug:

1. Map a file from hugetlbfs. Initialize pthread_mutex1 at offset 0
   and pthread_mutex2 at offset PAGE_SIZE of the hugetlbfs
   mapping.

   The mutexes must be initialized as PTHREAD_PROCESS_SHARED because
   PTHREAD_PROCESS_PRIVATE mutexes are not affected by this issue as
   their keys solely depend on the user space address.

2. Lock mutex1 and mutex2

3. Create thread1 and in the thread function lock mutex1, which
   results in thread1 blocking on the locked mutex1.

4. Create thread2 and in the thread function lock mutex2, which
   results in thread2 blocking on the locked mutex2.

5. Unlock mutex2. Despite the fact that mutex2 got unlocked, thread2
   still blocks on mutex2 because the futex_key points to mutex1.

To solve this issue we need to take the normal page index of the page
which contains the futex into account, if the futex is in an hugetlbfs
mapping. In other words, we calculate the normal page mapping index of
the subpage in the hugetlbfs mapping.

Mappings which are not based on hugetlbfs are not affected and still
use page->index.

Thanks to Mel Gorman who provided a patch for adding proper evaluation
functions to the hugetlbfs code to avoid exposing hugetlbfs specific
details to the futex code.

[ tglx: Massaged changelog ]

Signed-off-by: Zhang Yi <zhang.yi20@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Tested-by: Ma Chenggong <ma.chenggong@zte.com.cn>
Reviewed-by: 'Mel Gorman' <mgorman@suse.de>
Acked-by: 'Darren Hart' <dvhart@linux.intel.com>
Cc: 'Peter Zijlstra' <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/000101ce71a6%24a83c5880%24f8b50980%24@com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-25 23:11:19 +02:00
Greg Kroah-Hartman b5aef682e0 Merge 3.10-rc7 into driver-core-next
We want the firmware merge fixes, and other bits, in here now.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24 15:14:43 -07:00
Mimi Zohar 37ec43cdc4 evm: calculate HMAC after initializing posix acl on tmpfs
Included in the EVM hmac calculation is the i_mode.  Any changes to
the i_mode need to be reflected in the hmac.  shmem_mknod() currently
calls generic_acl_init(), which modifies the i_mode, after calling
security_inode_init_security().  This patch reverses the order in
which they are called.

Reported-by: Sven Vermeulen <sven.vermeulen@siphos.be>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
2013-06-20 07:47:49 -04:00
Aneesh Kumar K.V fce144b477 mm/THP: deposit the transpare huge pgtable before set_pmd
Architectures like powerpc use the deposited pgtable to store hash index
values.  We need to make the deposted pgtable is visible to other cpus
before we are ready to take a hash fault.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20 16:55:08 +10:00
Aneesh Kumar K.V a6bf2bb03e mm/THP: withdraw the pgtable after pmdp related operations
For architectures like ppc64 we look at deposited pgtable when calling
pmdp_get_and_clear.  So do the pgtable_trans_huge_withdraw after finishing
pmdp related operations.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20 16:55:07 +10:00
Aneesh Kumar K.V 6b0b50b061 mm/THP: add pmd args to pgtable deposit and withdraw APIs
This will be later used by powerpc THP support.  In powerpc we want to use
pgtable for storing the hash index values.  So instead of adding them to
mm_context list, we would like to store them in the second half of pmd

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20 16:55:07 +10:00
Aneesh Kumar K.V 8663890a9e mm/thp: use the correct function when updating access flags
We should use pmdp_set_access_flags to update access flags.  Archs like
powerpc use extra checks(_PAGE_BUSY) when updating a hugepage PTE.  A
set_pmd_at doesn't do those checks.  We should use set_pmd_at only when
updating a none hugepage PTE.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>a
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20 16:55:06 +10:00
Linus Torvalds 4c3577c58f Merge branch 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux
Pull SLAB fix from Pekka Enberg:
 "A slab regression fix by Sasha Levin"

* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  slab: prevent warnings when allocating with __GFP_NOWARN
2013-06-18 06:27:47 -10:00
Greg Kroah-Hartman bb07b00be7 Merge 3.10-rc6 into driver-core-next
We want these fixes here too.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17 16:57:20 -07:00
Steve Capper 9e5fc74c30 mm: hugetlb: Copy general hugetlb code from x86 to mm.
The huge_pte_alloc, huge_pte_offset and follow_huge_p[mu]d
functions in x86/mm/hugetlbpage.c do not rely on any architecture
specific knowledge other than the fact that pmds and puds can be
treated as huge ptes.

To allow other architectures to use this code (and reduce the need
for code duplication), this patch copies these functions into mm,
replaces the use of pud_large with pud_huge and provides a config
flag to activate them:
CONFIG_ARCH_WANT_GENERAL_HUGETLB

If CONFIG_ARCH_WANT_HUGE_PMD_SHARE is also active then the
huge_pmd_share code will be called by huge_pte_alloc (othewise we
call pmd_alloc and skip the sharing code).

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
2013-06-14 09:40:01 +01:00
Steve Capper 3212b535f2 mm: hugetlb: Copy huge_pmd_share from x86 to mm.
Under x86, multiple puds can be made to reference the same bank of
huge pmds provided that they represent a full PUD_SIZE of shared
huge memory that is aligned to a PUD_SIZE boundary.

The code to share pmds does not require any architecture specific
knowledge other than the fact that pmds can be indexed, thus can
be beneficial to some other architectures.

This patch copies the huge pmd sharing (and unsharing) logic from
x86/ to mm/ and introduces a new config option to activate it:
CONFIG_ARCH_WANTS_HUGE_PMD_SHARE

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
2013-06-14 09:33:47 +01:00
Sasha Levin 907985f48b slab: prevent warnings when allocating with __GFP_NOWARN
Sasha Levin noticed that the warning introduced by commit 6286ae9
("slab: Return NULL for oversized allocations) is being triggered:

  WARNING: CPU: 15 PID: 21519 at mm/slab_common.c:376 kmalloc_slab+0x2f/0xb0()
  can: request_module (can-proto-4) failed.
  mpoa: proc_mpc_write: could not parse ''
  Modules linked in:
  CPU: 15 PID: 21519 Comm: trinity-child15 Tainted: G W    3.10.0-rc4-next-20130607-sasha-00011-gcd78395-dirty #2
   0000000000000009 ffff880020a95e30 ffffffff83ff4041 0000000000000000
   ffff880020a95e68 ffffffff8111fe12 fffffffffffffff0 00000000000082d0
   0000000000080000 0000000000080000 0000000001400000 ffff880020a95e78
  Call Trace:
   [<ffffffff83ff4041>] dump_stack+0x4e/0x82
   [<ffffffff8111fe12>] warn_slowpath_common+0x82/0xb0
   [<ffffffff8111fe55>] warn_slowpath_null+0x15/0x20
   [<ffffffff81243dcf>] kmalloc_slab+0x2f/0xb0
   [<ffffffff81278d54>] __kmalloc+0x24/0x4b0
   [<ffffffff8196ffe3>] ? security_capable+0x13/0x20
   [<ffffffff812a26b7>] ? pipe_fcntl+0x107/0x210
   [<ffffffff812a26b7>] pipe_fcntl+0x107/0x210
   [<ffffffff812b7ea0>] ? fget_raw_light+0x130/0x3f0
   [<ffffffff812aa5fb>] SyS_fcntl+0x60b/0x6a0
   [<ffffffff8403ca98>] tracesys+0xe1/0xe6

Andrew Morton writes:

  __GFP_NOWARN is frequently used by kernel code to probe for "how big
  an allocation can I get".  That's a bit lame, but it's used on slow
  paths and is pretty simple.

However, SLAB would still spew a warning when a big allocation happens
if the __GFP_NOWARN flag is _not_ set to expose kernel bugs.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ penberg@kernel.org: improve changelog ]
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-06-13 10:01:58 +03:00