Граф коммитов

10 Коммитов

Автор SHA1 Сообщение Дата
David Gibson 71f349799b [POWERPC] Convert remaining dts-v0 files to v1
At the moment we have a mixture of left-over version 0 and new-format
version 1 files in arch/powerpc/boot/dts.  This is potentially
confusing to people new to the dts format attempting to figure it out.

So, this patch converts all the as-yet unconverted dts v0 files and
converts them to v1.  They're mechanically-converted, and not hand
tweaked so in some cases they're not 100% in keeping with usual v1
style, but the convertor program does have some heuristics so the
discrepancies aren't too bad.

I have checked that this patch produces no changes to the resulting
dtb binaries.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-29 07:06:56 -05:00
David Gibson ecc6cd73b7 [POWERPC] Start removing linux,network-index in favour of aliases
This patch alters the bootwrapper for a number of machines (roubhly
all 4xx based cuboot or treeboot platforms) to use aliases instead of
the linux,network-index hack to work out which MAC address to attach
to which ethernet device node.

The now obsolete linux,network-index properties are removed from the
corresponding device trees.  This won't break backwards compatiblity,
because in cases where this fixup code is relevant, the device tree is
part of the kernel image.

The references to linux,network-index are removed from
booting-without-of.txt.  Not only is it now deprecated, but as a hack
applicable only when the device tree blob and fixup code were in the
same image, this property never belonged in booting-without-of.txt
which describes the interface between the kernel and firmware or
bootloaders which produce a device tree.  By the time the device tree
reaches the kernel, all the MAC addresses must be fully filled in.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:19:16 -05:00
David Gibson 22258fa40e [POWERPC] Enable RTC for Ebony and Walnut (v2)
This patch extends the Ebony and Walnut platform code to instantiate
the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip
found on both those boards.  The patch uses a helper function to scan
the device tree and instantiate the appropriate platform_device based
on it, so it should be easy to extend for other boards which have mmio
mapped RTC chips.

Along with this, the device tree binding for the ds1743 chips is
tweaked, based on the existing DS1385 OF binding found at:
	http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt
Although that document covers the NVRAM portion of the chip, whereas
here we're interested in the RTC portion, so it's not entirely clear
if that's a good model.

This implements only RTC class driver support - that is /dev/rtc0, not
/dev/rtc, and the low-level get/set time callbacks remain
unimplemented.  That means in order to get at the clock you will
either need a modified version of hwclock which will look at
/dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25 07:07:26 -06:00
Stefan Roese 8aaed98c1e [POWERPC] 4xx: Add aliases node to 4xx dts files
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:36:30 -06:00
Josh Boyer 72fda1148e [POWERPC] 4xx: Rename CPU nodes to avoid dtc incompatibility
Recent DTC versions disallow certain special characters in full paths without
being quoted with {}.  That however breaks compatibility with older DTC
versions.  Work around this by renaming the CPU nodes for the 4xx files to a
generic node name, and specify the processor type in the model property of the
CPU node.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:33:47 -06:00
Benjamin Herrenschmidt 379865d63c [POWERPC] 4xx: Add PCI to Walnut platform
This wires up the 4xx PCI support & device-tree bits for the
405GP based Walnut platform.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23 13:13:22 -06:00
Steven A. Falco 29273158f8 [POWERPC] 4xx: Fix Walnut DTS interrupt property
Re-order the EMAC interrupts in the walnut.dts file so that they are mapped
correctly.

Signed-off-by: Steve Falco <sfalco at harris.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-11-01 07:20:43 -05:00
Josh Boyer b3af7a55da [POWERPC] 4xx: Enable EMAC for PPC405 Walnut board
This patch enables the ibm_newemac driver for the Walnut board.  It fixes the
device tree for the walnut board to order the MAL interrupts correctly and
adds the local-mac-address property to the EMAC node.  The bootwrapper is also
updated to extract the MAC address from the OpenBIOS offset where it is stored.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-19 16:18:33 -05:00
Josh Boyer bf07f32d43 [POWERPC] 4xx: Convert Walnut flash mappings to new binding
A new binding for flash devices was recently introduced.  This updates the
Walnut DTS to use the new binding.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-09-19 21:13:16 -05:00
Josh Boyer 8852ab7afc [POWERPC] Walnut DTS
Device tree source file for the PPC405 Walnut evaluation board.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-09-07 07:50:50 -05:00