As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya).
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang).
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney).
- Enable thermal cooling for Tegra194 (Yi-Wei Wang).
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss).
- Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu
(Christian Marangi).
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh).
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König).
- Make the TEO cpuidle governor check CPU utilization in order to refine
idle state selection (Kajetan Puchalski).
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in that
driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing).
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann).
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh).
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki).
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski).
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald).
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald).
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap).
- Fix possible name leak in powercap_register_zone() (Yang Yingliang).
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui).
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada).
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui).
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman).
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring).
- Fix error checking in opp_migrate_dentry() (Qi Zheng).
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio).
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler).
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap).
-----BEGIN PGP SIGNATURE-----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=lZLx
-----END PGP SIGNATURE-----
Merge tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add EPP support to the AMD P-state cpufreq driver, add support
for new platforms to the Intel RAPL power capping driver, intel_idle
and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
drop the custom cpufreq driver for loongson1 that is not necessary any
more (and the corresponding cpufreq platform device), fix assorted
issues and clean up code.
Specifics:
- Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
Karny, Arnd Bergmann, Bagas Sanjaya)
- Drop the custom cpufreq driver for loongson1 that is not necessary
any more and the corresponding cpufreq platform device (Keguang
Zhang)
- Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
entries (Paul E. McKenney)
- Enable thermal cooling for Tegra194 (Yi-Wei Wang)
- Register module device table and add missing compatibles for
cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)
- Various dt binding updates for qcom-cpufreq-nvmem and
opp-v2-kryo-cpu (Christian Marangi)
- Make kobj_type structure in the cpufreq core constant (Thomas
Weißschuh)
- Make cpufreq_unregister_driver() return void (Uwe Kleine-König)
- Make the TEO cpuidle governor check CPU utilization in order to
refine idle state selection (Kajetan Puchalski)
- Make Kconfig select the haltpoll cpuidle governor when the haltpoll
cpuidle driver is selected and replace a default_idle() call in
that driver with arch_cpu_idle() to allow MWAIT to be used (Li
RongQing)
- Add Emerald Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy)
- Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
avoid randconfig build failures (Arnd Bergmann)
- Make kobj_type structures used in the cpuidle sysfs interface
constant (Thomas Weißschuh)
- Make the cpuidle driver registration code update microsecond values
of idle state parameters in accordance with their nanosecond values
if they are provided (Rafael Wysocki)
- Make the PSCI cpuidle driver prevent topology CPUs from being
suspended on PREEMPT_RT (Krzysztof Kozlowski)
- Document that pm_runtime_force_suspend() cannot be used with
DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)
- Add EXPORT macros for exporting PM functions from drivers (Richard
Fitzgerald)
- Remove /** from non-kernel-doc comments in hibernation code (Randy
Dunlap)
- Fix possible name leak in powercap_register_zone() (Yang Yingliang)
- Add Meteor Lake and Emerald Rapids support to the intel_rapl power
capping driver (Zhang Rui)
- Modify the idle_inject power capping facility to support 100% idle
injection (Srinivas Pandruvada)
- Fix large time windows handling in the intel_rapl power capping
driver (Zhang Rui)
- Fix memory leaks with using debugfs_lookup() in the generic PM
domains and Energy Model code (Greg Kroah-Hartman)
- Add missing 'cache-unified' property in the example for kryo OPP
bindings (Rob Herring)
- Fix error checking in opp_migrate_dentry() (Qi Zheng)
- Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
Dybcio)
- Modify some power management utilities to use the canonical ftrace
path (Ross Zwisler)
- Correct spelling problems for Documentation/power/ as reported by
codespell (Randy Dunlap)"
* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
Documentation: amd-pstate: disambiguate user space sections
cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
PM: Add EXPORT macros for exporting PM functions
cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
MIPS: loongson32: Drop obsolete cpufreq platform device
powercap: intel_rapl: Fix handling for large time window
cpuidle: driver: Update microsecond values of state parameters as needed
cpuidle: sysfs: make kobj_type structures constant
cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
PM: EM: fix memory leak with using debugfs_lookup()
PM: domains: fix memory leak with using debugfs_lookup()
cpufreq: Make kobj_type structure constant
cpufreq: davinci: Fix clk use after free
cpufreq: amd-pstate: avoid uninitialized variable use
cpufreq: Make cpufreq_unregister_driver() return void
OPP: fix error checking in opp_migrate_dentry()
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
...
The runtime Power Management of CPU topology is not compatible with
PREEMPT_RT:
1. Core cpuidle path disables IRQs.
2. Core cpuidle calls cpuidle-psci.
3. cpuidle-psci in __psci_enter_domain_idle_state() calls
pm_runtime_put_sync_suspend() and pm_runtime_get_sync() which use
spinlocks (which are sleeping on PREEMPT_RT).
Deep sleep modes are not a priority of Realtime kernels because the
latencies might become unpredictable. On the other hand the PSCI CPU
idle power domain is a parent of other devices and power domain
controllers, thus it cannot be simply skipped (e.g. on Qualcomm SM8250).
Disable the idle callbacks in cpuidle-psci and mark the domain as
always on. This is a trade-off between making PREEMPT_RT working and
still having a proper power domain hierarchy in the system.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Adrien Thierry <athierry@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the cpuidle driver provides the target residency and exit latency in
nanoseconds, the corresponding values in microseconds need to be set to
reflect the provided numbers in order for the sysfs interface to show
them correctly, so make __cpuidle_driver_init() do that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some ARMv4 processors don't support suspend, which leads
to a build failure with the tegra and qualcomm cpuidle driver:
WARNING: unmet direct dependencies detected for ARM_CPU_SUSPEND
Depends on [n]: ARCH_SUSPEND_POSSIBLE [=n]
Selected by [y]:
- ARM_TEGRA_CPUIDLE [=y] && CPU_IDLE [=y] && (ARM [=y] || ARM64) && (ARCH_TEGRA [=n] || COMPILE_TEST [=y]) && !ARM64 && MMU [=y]
arch/arm/kernel/sleep.o: in function `__cpu_suspend':
(.text+0x68): undefined reference to `cpu_sa110_suspend_size'
(.text+0x68): undefined reference to `cpu_fa526_suspend_size'
Add an explicit dependency to make randconfig builds avoid
this combination.
Fixes: faae6c9f2e ("cpuidle: tegra: Enable compile testing")
Fixes: a871be6b8e ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver")
Link: https://lore.kernel.org/all/20211013160125.772873-1-arnd@kernel.org/
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h.
This removes 1 of a few remaining Qualcomm-specific headers into a more
approciate subdirectory under include/.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com
The instrumentation_begin()/end() annotations in poll_idle() were
complete nonsense. Specifically they caused tracing to happen in the
middle of noinstr code, resulting in RCU splats.
Now that local_clock() is noinstr, mark up the rest and let it rip.
Fixes: 00717eb8c9 ("cpuidle: Annotate poll_idle()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/oe-lkp/202301192148.58ece903-oliver.sang@intel.com
Link: https://lore.kernel.org/r/20230126151323.819534689@infradead.org
When a KVM guest has MWAIT, mwait_idle() is used as the default idle
function.
However, the cpuidle-haltpoll driver calls default_idle() from
default_enter_idle() directly and that one uses HLT instead of MWAIT,
which may affect performance adversely, because MWAIT is preferred to
HLT as explained by the changelog of commit aebef63cf7 ("x86: Remove
vendor checks from prefer_mwait_c1_over_halt").
Make default_enter_idle() call arch_cpu_idle(), which can use MWAIT,
instead of default_idle() to address this issue.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
[ rjw: Changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The recent cpuidle changes started triggering RCU splats on
Juno development boards:
| =============================
| WARNING: suspicious RCU usage
| -----------------------------
| include/trace/events/ipi.h:19 suspicious rcu_dereference_check() usage!
Fix cpuidle on ARM64:
- ... by introducing a new 'is_rcu' flag to the cpuidle helpers & make
ARM64 use it, as ARM64 wants to keep RCU active longer and wants to
do the ct_cpuidle_enter()/exit() dance itself.
- Also update the PSCI driver accordingly.
- This also removes the last known RCU_NONIDLE() user as a bonus.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/Y8Z31UbzG3LJgAXE@hirez.programming.kicks-ass.net
--
The added '.flags' value is sometimes ignored here because
it gets overwritten by another initialization:
drivers/cpuidle/cpuidle-mvebu-v7.c:24:33: error: initialized field overwritten [-Werror=override-init]
24 | #define MVEBU_V7_FLAG_DEEP_IDLE 0x10000
| ^~~~~~~
drivers/cpuidle/cpuidle-mvebu-v7.c:69:43: note: in expansion of macro 'MVEBU_V7_FLAG_DEEP_IDLE'
...
Merge the two fields into one.
Fixes: 4ce40e9dbe ("cpuidle, armada: Push RCU-idle into driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230117164642.1672784-1-arnd@kernel.org
The haltpoll cpuidle driver should select the haltpoll governor, so
as to ensure that they work together.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For all cpuidle drivers that use CPUIDLE_FLAG_RCU_IDLE, ensure that
all functions that call ct_cpuidle_enter() are marked __cpuidle.
( due to lack of noinstr validation on these platforms it is entirely
possible this isn't complete )
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230112195542.274096325@infradead.org
Tracing (kprobes included) and other compiler instrumentation relies
on a normal kernel runtime. Therefore all functions that disable RCU
should be noinstr, as should all functions that are called while RCU
is disabled.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230112195542.212914195@infradead.org
The __cpuidle functions will become a noinstr class, as such they need
explicit annotations.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.312601331@infradead.org
The whole disable-RCU, enable-IRQS dance is very intricate since
changing IRQ state is traced, which depends on RCU.
Add two helpers for the cpuidle case that mirror the entry code:
ct_cpuidle_enter()
ct_cpuidle_exit()
And fix all the cases where the enter/exit dance was buggy.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.130014793@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again before going idle is suboptimal.
Notably: this converts all dt_init_idle_driver() and
__CPU_PM_CPU_IDLE_ENTER() users for they are inextrably intertwined.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.068981667@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again before going idle is suboptimal.
Notably the cpu_pm_*() calls implicitly re-enable RCU for a bit.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.946630819@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.
Notably once implicitly through the cpu_pm_*() calls and once
explicitly doing ct_irq_*_irqon().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.760296658@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.
Notably once implicitly through the cpu_pm_*() calls and once
explicitly doing RCU_NONIDLE().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.699546331@infradead.org
Doing RCU-idle outside the driver, only to then temporarily enable it
again, at least twice, before going idle is suboptimal.
That is, once implicitly through the cpu_pm_*() calls and once
explicitly doing ct_irq_*_irqon().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230112195539.637185846@infradead.org
Make cpuidle_enter_state() consistent with the s2idle variant and
verify ->enter() always returns with interrupts disabled.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195539.576412812@infradead.org
Make cpuidle_state::enter() methods IRQ state invariant on exit.
Additionally make sure to use raw_local_irq_*() methods since this
cpuidle callback will be called with RCU already disabled.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195539.515253662@infradead.org
Modern interactive systems, such as recent Android phones, tend to have
power efficient shallow idle states. Selecting deeper idle states on a
device while a latency-sensitive workload is running can adversely
impact performance due to increased latency. Additionally, if the CPU
wakes up from a deeper sleep before its target residency as is often the
case, it results in a waste of energy on top of that.
At the moment, none of the available idle governors take any scheduling
information into account. They also tend to overestimate the idle
duration quite often, which causes them to select excessively deep idle
states, thus leading to increased wakeup latency and lower performance
with no power saving. For 'menu' while web browsing on Android for
instance, those types of wakeups ('too deep') account for over 24% of
all wakeups.
At the same time, on some platforms idle state 0 can be power efficient
enough to warrant wanting to prefer it over idle state 1. This is
because the power usage of the two states can be so close that
sufficient amounts of too deep state 1 sleeps can completely offset the
state 1 power saving to the point where it would've been more power
efficient to just use state 0 instead. This is, of course, for systems
where state 0 is not a polling state, such as arm-based devices.
Sleeps that happened in state 0 while they could have used state 1 ('too
shallow') only save less power than they otherwise could have. Too deep
sleeps, on the other hand, harm performance and nullify the potential
power saving from using state 1 in the first place. While taking this
into account, it is clear that on balance it is preferable for an idle
governor to have more too shallow sleeps instead of more too deep sleeps
on those kinds of platforms.
This patch specifically tunes TEO to prefer shallower idle states in
order to reduce wakeup latency and achieve better performance.
To this end, before selecting the next idle state it uses the avg_util
signal of a CPU's runqueue in order to determine to what extent the CPU
is being utilized. This util value is then compared to a threshold
defined as a percentage of the CPU's capacity (capacity >> 6 ie. ~1.5%
in the current implementation). If the util is above the threshold, the
index of the idle state selected by TEO metrics will be reduced by 1,
thus selecting a shallower state. If the util is below the threshold,
the governor defaults to the TEO metrics mechanism to try to select the
deepest available idle state based on the closest timer event and its
own correctness.
The main goal of this is to reduce latency and increase performance for
some workloads. Under some workloads it will result in an increase in
power usage (Geekbench 5) while for other workloads it will also result
in a decrease in power usage compared to TEO (PCMark Web, Jankbench,
Speedometer).
It can provide drastically decreased latency and performance benefits in
certain types of workloads that are sensitive to latency.
Example test results:
1. GB5 (better score, latency & more power usage)
| metric | menu | teo | teo-util-aware |
| ------------------------------------- | -------------- | ----------------- | ----------------- |
| gmean score | 2826.5 (0.0%) | 2764.8 (-2.18%) | 2865 (1.36%) |
| gmean power usage [mW] | 2551.4 (0.0%) | 2606.8 (2.17%) | 2722.3 (6.7%) |
| gmean too deep % | 14.99% | 9.65% | 4.02% |
| gmean too shallow % | 2.5% | 5.96% | 14.59% |
| gmean task wakeup latency (asynctask) | 78.16μs (0.0%) | 61.60μs (-21.19%) | 54.45μs (-30.34%) |
2. Jankbench (better score, latency & less power usage)
| metric | menu | teo | teo-util-aware |
| ------------------------------------- | -------------- | ----------------- | ----------------- |
| gmean frame duration | 13.9 (0.0%) | 14.7 (6.0%) | 12.6 (-9.0%) |
| gmean jank percentage | 1.5 (0.0%) | 2.1 (36.99%) | 1.3 (-17.37%) |
| gmean power usage [mW] | 144.6 (0.0%) | 136.9 (-5.27%) | 121.3 (-16.08%) |
| gmean too deep % | 26.00% | 11.00% | 2.54% |
| gmean too shallow % | 4.74% | 11.89% | 21.93% |
| gmean wakeup latency (RenderThread) | 139.5μs (0.0%) | 116.5μs (-16.49%) | 91.11μs (-34.7%) |
| gmean wakeup latency (surfaceflinger) | 124.0μs (0.0%) | 151.9μs (22.47%) | 87.65μs (-29.33%) |
Signed-off-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
[ rjw: Comment edits and white space adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a no_poll flag to teo_find_shallower_state() that will let the
function optionally not consider polling states.
This allows the caller to guard against the function inadvertently
resulting in TEO putting the CPU in a polling state when that
behaviour is undesirable.
Signed-off-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add powerpc qspinlock implementation optimised for large system scalability and
paravirt. See the merge message for more details.
- Enable objtool to be built on powerpc to generate mcount locations.
- Use a temporary mm for code patching with the Radix MMU, so the writable mapping is
restricted to the patching CPU.
- Add an option to build the 64-bit big-endian kernel with the ELFv2 ABI.
- Sanitise user registers on interrupt entry on 64-bit Book3S.
- Many other small features and fixes.
Thanks to: Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn Helgaas, Bo Liu, Chen
Lifu, Christoph Hellwig, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Colin
Ian King, Deming Wang, Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven,
Gustavo A. R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol Jain,
Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan Lynch, Naveen N. Rao,
Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Randy Dunlap, Rohan McLure,
Russell Currey, Sathvika Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng, XueBing Chen, Yang
Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu, Wolfram Sang.
-----BEGIN PGP SIGNATURE-----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=7k3p
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add powerpc qspinlock implementation optimised for large system
scalability and paravirt. See the merge message for more details
- Enable objtool to be built on powerpc to generate mcount locations
- Use a temporary mm for code patching with the Radix MMU, so the
writable mapping is restricted to the patching CPU
- Add an option to build the 64-bit big-endian kernel with the ELFv2
ABI
- Sanitise user registers on interrupt entry on 64-bit Book3S
- Many other small features and fixes
Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn
Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET,
Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang,
Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A.
R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol
Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin,
Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika
Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng,
XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu,
and Wolfram Sang.
* tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits)
powerpc/code-patching: Fix oops with DEBUG_VM enabled
powerpc/qspinlock: Fix 32-bit build
powerpc/prom: Fix 32-bit build
powerpc/rtas: mandate RTAS syscall filtering
powerpc/rtas: define pr_fmt and convert printk call sites
powerpc/rtas: clean up includes
powerpc/rtas: clean up rtas_error_log_max initialization
powerpc/pseries/eeh: use correct API for error log size
powerpc/rtas: avoid scheduling in rtas_os_term()
powerpc/rtas: avoid device tree lookups in rtas_os_term()
powerpc/rtasd: use correct OF API for event scan rate
powerpc/rtas: document rtas_call()
powerpc/pseries: unregister VPA when hot unplugging a CPU
powerpc/pseries: reset the RCU watchdogs after a LPM
powerpc: Take in account addition CPU node when building kexec FDT
powerpc: export the CPU node count
powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state
powerpc/dts/fsl: Fix pca954x i2c-mux node names
cxl: Remove unnecessary cxl_pci_window_alignment()
selftests/powerpc: Fix resource leaks
...
During the comparative study of cpuidle governors, it is noticed that the
menu governor does not select CEDE state in some scenarios even though when
the sleep duration of the CPU exceeds the target residency of the CEDE idle
state this is because the CPU exits the snooze "polling" state when snooze
time limit is reached in the snooze_loop(), which is not a real wake up
and it just means that the polling state selection was not adequate.
cpuidle governors rely on CPUIDLE_FLAG_POLLING flag to be set for the
polling states to handle the condition mentioned above.
Hence, set the CPUIDLE_FLAG_POLLING flag for snooze state (polling state)
in powerpc arch to make the cpuidle governor work as expected.
Reference Commits:
- Timeout enabled for snooze state:
commit 78eaa10f02
("cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state")
- commit dc2251bf98
("cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol")
- Fix wakeup stats in governor for polling states
commit 5f26bdceb9
("cpuidle: menu: Fix wakeup statistics updates for polling state")
Signed-off-by: Aboorva Devarajan <aboorvad@linux.vnet.ibm.com>
Tested-by: Vishal Chourasia <vishalc@linux.vnet.ibm.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Reviewed-by: Vishal Chourasia <vishalc@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221114145611.37669-1-aboorvad@linux.vnet.ibm.com
The drv->state_count is assigned the total number of available states, so
let's make that clear.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While we correctly skips to initialize an idle state from a disabled idle
state node in DT, the returned value from dt_init_idle_driver() don't get
adjusted accordingly. Instead the number of found idle state nodes are
returned, while the callers are expecting the number of successfully
initialized idle states from DT.
This leads to cpuidle drivers unnecessarily continues to initialize their
idle state specific data. Moreover, in the case when all idle states have
been disabled in DT, we would end up registering a cpuidle driver, rather
than relying on the default arch specific idle call.
Fixes: 9f14da3455 ("drivers: cpuidle: implement DT based idle states infrastructure")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's useful to understand whether we are using OS-initiated (OSI) mode or
Platform Coordinated (PC) mode, when initializing the CPU PM domains.
Therefore, let's extend the print in the log after a successful probe with
this information.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Improvements to the CPU topology subsystem, which fix some issues
where RISC-V would report bad topology information.
* The default NR_CPUS has increased to XLEN, and the maximum
configurable value is 512.
* The CD-ROM filesystems have been enabled in the defconfig.
* Support for THP_SWAP has been added for rv64 systems.
There are also a handful of cleanups and fixes throughout the tree.
-----BEGIN PGP SIGNATURE-----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=LJg6
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Improvements to the CPU topology subsystem, which fix some issues
where RISC-V would report bad topology information.
- The default NR_CPUS has increased to XLEN, and the maximum
configurable value is 512.
- The CD-ROM filesystems have been enabled in the defconfig.
- Support for THP_SWAP has been added for rv64 systems.
There are also a handful of cleanups and fixes throughout the tree.
* tag 'riscv-for-linus-6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: enable THP_SWAP for RV64
RISC-V: Print SSTC in canonical order
riscv: compat: s/failed/unsupported if compat mode isn't supported
RISC-V: Increase range and default value of NR_CPUS
cpuidle: riscv-sbi: Fix CPU_PM_CPU_IDLE_ENTER_xyz() macro usage
perf: RISC-V: throttle perf events
perf: RISC-V: exclude invalid pmu counters from SBI calls
riscv: enable CD-ROM file systems in defconfig
riscv: topology: fix default topology reporting
arm64: topology: move store_cpu_topology() to shared code
The drivers branch for 6.1 is a bit larger than for most releases. Most
of the changes come from SoC maintainers for the drivers/soc subsystem:
- A new driver for error handling on the NVIDIA Tegra
'control backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip
SoCs, various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM
driver, the Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas,
Tegra, Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers that
merge updates this way:
- Various updates and new drivers in the memory controller
subsystem for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A
v1.1 specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmM+j54ACgkQmmx57+YA
GNkK1Q//fSzCHUPNTrZKJi8mRtp/32Nrpav3eorMZWltKnYbYQyhqH/LCuSZJfe/
rmGYFxsH6DHEgfHqqyzm6PNC0S4Hle6KiB5xnqXrTgqciPuSg4Fa9OMQgkbiQF6x
uB2KR+TouQA3MssQh6NW4wy5XAkEqudZCSnEyOTJTmdpepZd/1Eu2Rhn8kx5AYQN
pzYNGURRoirgYbO9vHMssCcpqyGNdR9SWXcOkROyd65L4LCHQ9JRh4etg7fSXP5j
abWtTHSOwD8MTXOENOiNw/vyCfBX7wUoJkY2v8OUo3G/20qbOXKWPWi056gyDjVQ
kJdlnnK4APtiluyBg2alEEZmJOd1iCaVP2j84EO1N4FEek2UGd/lMNOtAOJa+wbh
eiE6KC5gswe+99//PdY4gB+7dRM3I0gU7FDMl9G5A4DPMEE/0bMKLKk1jR5vyYXl
6QpN2N0OlU7d16MJiP9RvWf2/xJrcQrLQcy8FKvFVWClJ9wMvBXozKrvXgji9l3I
ZTW+EViQiyWmj6KbFlDZkYT+Q6YosxaogJUNrZeIaAwmwJj1oTa+M6jYRnFU6uha
XxG5TrybC9JQ/BpYCTYEqb16LOYALwEm7NWmylWASUCCZclC1u35qmmVEhDyBcS9
98ePumkAwrcjmW0TZsiYXOCQWNOITuvU/Ku2t/+6Mhg+Xl44zX4=
=WX9J
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
The function psci_pd_try_set_osi_mode() will print an error if enabling
OSI mode fails. To ease debugging PSCI issues print corresponding
message if switching to PC mode fails too.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220926110249.666813-1-dmitry.baryshkov@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently, we are using CPU_PM_CPU_IDLE_ENTER_PARAM() for all SBI HSM
suspend types so retentive suspend types are also treated non-retentive
and kernel will do redundant additional work for these states.
The BIT[31] of SBI HSM suspend types allows us to differentiate between
retentive and non-retentive suspend types so we should use this BIT
to call appropriate CPU_PM_CPU_IDLE_ENTER_xyz() macro.
Fixes: 6abf32f1d9 ("cpuidle: Add RISC-V SBI CPU idle driver")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20220718084553.2056169-1-apatel@ventanamicro.com/
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
gov has already been NULL checked at the beginning of
cpuidle_switch_governor, so remove redundant check.
While at it, use pr_info() instead printk() to address the following
checkpatch warning:
WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then
dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
[ rjw: Subject and changelog edits, added empty line after if () ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The double `are' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
[ rjw: New subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other users and
helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they are
still in use (Liang He).
- Minor OPP cleanups (Viresh Kumar and Yang Li).
- Add a trace event for cpuidle to track missed (too deep or too
shallow) wakeups (Kajetan Puchalski).
-----BEGIN PGP SIGNATURE-----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=LBb0
-----END PGP SIGNATURE-----
Merge tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are ARM cpufreq updates and operating performance points (OPP)
updates plus one cpuidle update adding a new trace point.
Specifics:
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
- Make dev_pm_opp_set_regulators() accept NULL terminated list
(Viresh Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other users and
helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they
are still in use (Liang He).
- Minor OPP cleanups (Viresh Kumar and Yang Li).
- Add a trace event for cpuidle to track missed (too deep or too
shallow) wakeups (Kajetan Puchalski)"
* tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
cpuidle: Add cpu_idle_miss trace event
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
dt-bindings: opp: Add msm8939 to the compatible list
dt-bindings: opp: Add missing compat devices
dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
cpufreq: Change order of online() CB and policy->cpus modification
cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
cpufreq: qcom-hw: Disable LMH irq when disabling policy
cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
...
Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text. Also included in here are a few other minor updates,
2 USB files, and one Documentation file update to get the SPDX lines
correct.
All of these have been in the linux-next tree for a very long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN
4AKdqbiBNlFbCroQwmeQ
=v1sg
-----END PGP SIGNATURE-----
Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
Add a trace event for cpuidle to track missed (too deep or too shallow)
wakeups.
After each wakeup, CPUIdle already computes whether the entered state was
optimal, above or below the desired one and updates the relevant
counters. This patch makes it possible to trace those events in addition
to just reading the counters.
The patterns of types and percentages of misses across different
workloads appear to be very consistent. This makes the trace event very
useful for comparing the relative correctness of different CPUIdle
governors for different types of workloads, or for finding the
optimal governor for a given device.
Signed-off-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This pull request contains the following branches:
doc.2022.06.21a: Documentation updates.
fixes.2022.07.19a: Miscellaneous fixes.
nocb.2022.07.19a: Callback-offload updates, perhaps most notably a new
RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to
be offloaded at boot time, regardless of kernel boot parameters.
This is useful to battery-powered systems such as ChromeOS
and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel
boot parameter prevents offloaded callbacks from interfering
with real-time workloads and with energy-efficiency mechanisms.
poll.2022.07.21a: Polled grace-period updates, perhaps most notably
making these APIs account for both normal and expedited grace
periods.
rcu-tasks.2022.06.21a: Tasks RCU updates, perhaps most notably reducing
the CPU overhead of RCU tasks trace grace periods by more than
a factor of two on a system with 15,000 tasks. The reduction
is expected to increase with the number of tasks, so it seems
reasonable to hypothesize that a system with 150,000 tasks might
see a 20-fold reduction in CPU overhead.
torture.2022.06.21a: Torture-test updates.
ctxt.2022.07.05a: Updates that merge RCU's dyntick-idle tracking into
context tracking, thus reducing the overhead of transitioning to
kernel mode from either idle or nohz_full userspace execution
for kernels that track context independently of RCU. This is
expected to be helpful primarily for kernels built with
CONFIG_NO_HZ_FULL=y.
-----BEGIN PGP SIGNATURE-----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=vUNm
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offload updates, perhaps most notably a new
RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be
offloaded at boot time, regardless of kernel boot parameters.
This is useful to battery-powered systems such as ChromeOS and
Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot
parameter prevents offloaded callbacks from interfering with
real-time workloads and with energy-efficiency mechanisms
- Polled grace-period updates, perhaps most notably making these APIs
account for both normal and expedited grace periods
- Tasks RCU updates, perhaps most notably reducing the CPU overhead of
RCU tasks trace grace periods by more than a factor of two on a
system with 15,000 tasks.
The reduction is expected to increase with the number of tasks, so it
seems reasonable to hypothesize that a system with 150,000 tasks
might see a 20-fold reduction in CPU overhead
- Torture-test updates
- Updates that merge RCU's dyntick-idle tracking into context tracking,
thus reducing the overhead of transitioning to kernel mode from
either idle or nohz_full userspace execution for kernels that track
context independently of RCU.
This is expected to be helpful primarily for kernels built with
CONFIG_NO_HZ_FULL=y
* tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits)
rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings
rcu: Diagnose extended sync_rcu_do_polled_gp() loops
rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings
rcutorture: Test polled expedited grace-period primitives
rcu: Add polled expedited grace-period primitives
rcutorture: Verify that polled GP API sees synchronous grace periods
rcu: Make Tiny RCU grace periods visible to polled APIs
rcu: Make polled grace-period API account for expedited grace periods
rcu: Switch polled grace-period APIs to ->gp_seq_polled
rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty
rcu/nocb: Add option to opt rcuo kthreads out of RT priority
rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread()
rcu/nocb: Add an option to offload all CPUs on boot
rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call
rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order
rcu/nocb: Add/del rdp to iterate from rcuog itself
rcu/tree: Add comment to describe GP-done condition in fqs loop
rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs()
rcu/kvfree: Remove useless monitor_todo flag
rcu: Cleanup RCU urgency state for offline CPU
...
- Make cpufreq_show_cpus() more straightforward (Viresh Kumar).
- Drop unnecessary CPU hotplug locking from store() used by cpufreq
sysfs attributes (Viresh Kumar).
- Make the ACPI cpufreq driver support the boost control interface on
Zhaoxin/Centaur processors (Tony W Wang-oc).
- Print a warning message on attempts to free an active cpufreq policy
which should never happen (Viresh Kumar).
- Fix grammar in the Kconfig help text for the loongson2 cpufreq
driver (Randy Dunlap).
- Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
governor (Zhao Liu).
- Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
cpuidle driver (Eiichi Tsukata).
- Modify intel_idle to treat C1 and C1E as independent idle states on
Sapphire Rapids (Artem Bityutskiy).
- Extend support for wakeirq to callback wrappers used during system
suspend and resume (Ulf Hansson).
- Defer waiting for device probe before loading a hibernation image
till the first actual device access to avoid possible deadlocks
reported by syzbot (Tetsuo Handa).
- Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
Helgaas).
- Add Raptor Lake-P to the list of processors supported by the Intel
RAPL driver (George D Sworo).
- Add Alder Lake-N and Raptor Lake-P to the list of processors for
which Power Limit4 is supported in the Intel RAPL driver (Sumeet
Pawnikar).
- Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
attempting to remove it (Hsin-Yi Wang).
- Change the Energy Model code to represent power in micro-Watts and
adjust its users accordingly (Lukasz Luba).
- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).
- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).
- Address kernel-doc warnings by adding the description for unused
fucntion parameters in devfreq core (Mauro Carvalho Chehab).
- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).
- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).
- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).
- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).
- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----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=XeLV
-----END PGP SIGNATURE-----
Merge tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly minor improvements all over including new CPU IDs for
the Intel RAPL driver, an Energy Model rework to use micro-Watt as the
power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq
updates, documentation cleanups and a new version of the pm-graph
suite of utilities.
Specifics:
- Make cpufreq_show_cpus() more straightforward (Viresh Kumar).
- Drop unnecessary CPU hotplug locking from store() used by cpufreq
sysfs attributes (Viresh Kumar).
- Make the ACPI cpufreq driver support the boost control interface on
Zhaoxin/Centaur processors (Tony W Wang-oc).
- Print a warning message on attempts to free an active cpufreq
policy which should never happen (Viresh Kumar).
- Fix grammar in the Kconfig help text for the loongson2 cpufreq
driver (Randy Dunlap).
- Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
governor (Zhao Liu).
- Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
cpuidle driver (Eiichi Tsukata).
- Modify intel_idle to treat C1 and C1E as independent idle states on
Sapphire Rapids (Artem Bityutskiy).
- Extend support for wakeirq to callback wrappers used during system
suspend and resume (Ulf Hansson).
- Defer waiting for device probe before loading a hibernation image
till the first actual device access to avoid possible deadlocks
reported by syzbot (Tetsuo Handa).
- Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
Helgaas).
- Add Raptor Lake-P to the list of processors supported by the Intel
RAPL driver (George D Sworo).
- Add Alder Lake-N and Raptor Lake-P to the list of processors for
which Power Limit4 is supported in the Intel RAPL driver (Sumeet
Pawnikar).
- Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
attempting to remove it (Hsin-Yi Wang).
- Change the Energy Model code to represent power in micro-Watts and
adjust its users accordingly (Lukasz Luba).
- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).
- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).
- Address kernel-doc warnings by adding the description for unused
function parameters in devfreq core (Mauro Carvalho Chehab).
- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).
- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).
- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).
- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).
- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello)"
* tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
PM: QoS: Add check to make sure CPU freq is non-negative
PM: hibernate: defer device probing when resuming from hibernation
intel_idle: make SPR C1 and C1E be independent
cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask
cpufreq: loongson2: fix Kconfig "its" grammar
pm-graph v5.9
cpufreq: Warn users while freeing active policy
cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
firmware: arm_scmi: Get detailed power scale from perf
Documentation: EM: Switch to micro-Watts scale
PM: EM: convert power field to micro-Watts precision and align drivers
PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
PM / devfreq: shut up kernel-doc warnings
dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
dt-bindings: interconnect: Add MediaTek CCI dt-bindings
PM: domains: Ensure genpd_debugfs_dir exists before remove
PM: runtime: Extend support for wakeirq for force_suspend|resume
...
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Prepare with moving the IRQ extended quiescent states
entrypoints to context tracking. For now those are dumb redirection to
existing RCU calls.
[ paulmck: Apply Stephen Rothwell feedback from -next. ]
[ paulmck: Apply Nathan Chancellor feedback. ]
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Start with moving the idle extended quiescent states
entrypoints to context tracking. For now those are dumb redirections to
existing RCU calls.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Since commit 788961462f ("ARM: psci: cpuidle: Enable PSCI CPUidle
driver") the generic ARM cpuidle driver doesn't probe anymore because
arm_cpuidle_init() will always return -EOPNOTSUPP. That is, because the
mentioned commit removes the only .cpu_suspend and .cpu_init_idle
provider.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220529181329.2345722-2-michael@walle.cc
Signed-off-by: Will Deacon <will@kernel.org>
Add trace points as are implemented in KVM host halt polling.
This helps tune guest halt polling params.
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Based on the normalized pattern:
this file is licensed under the terms of the gnu general public
license version 2 this program is licensed as is without any warranty
of any kind whether express or implied
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marge Energy Model support updates and cpuidle updates for 5.19-rc1:
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
* pm-em:
PM: EM: Decrement policy counter
powercap: DTPM: Check for Energy Model type
thermal: cooling: Check Energy Model type in cpufreq_cooling and devfreq_cooling
Documentation: EM: Add artificial EM registration description
PM: EM: Remove old debugfs files and print all 'flags'
PM: EM: Change the order of arguments in the .active_power() callback
PM: EM: Use the new .get_cost() callback while registering EM
PM: EM: Add artificial EM flag
PM: EM: Add .get_cost() callback
* pm-cpuidle:
cpuidle: riscv-sbi: Fix code to allow a genpd governor to be used
cpuidle: psci: Fix regression leading to no genpd governor
intel_idle: Add AlderLake support
Shawn Guo
Linus Torvalds
Krzysztof Kozlowski
Rafael J. Wysocki
Thomas Weißschuh
Arnd Bergmann
Elliot Berman
Peter Zijlstra
Li RongQing
Kajetan Puchalski
Aboorva Devarajan
Ulf Hansson
Dmitry Baryshkov
Anup Patel
Yu Liao
Wolfram Sang
Jason Wang
Frederic Weisbecker
Michael Walle
Eiichi Tsukata
Thomas Gleixner