Zero is a valid fd. Error comparison should check for negative fd.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405586590-13657-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull locking fixes from Thomas Gleixner:
"The locking department delivers:
- A rather large and intrusive bundle of fixes to address serious
performance regressions introduced by the new rwsem / mcs
technology. Simpler solutions have been discussed, but they would
have been ugly bandaids with more risk than doing the right thing.
- Make the rwsem spin on owner technology opt-in for architectures
and enable it only on the known to work ones.
- A few fixes to the lockdep userspace library"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Add CONFIG_RWSEM_SPIN_ON_OWNER
locking/mutex: Disable optimistic spinning on some architectures
locking/rwsem: Reduce the size of struct rw_semaphore
locking/rwsem: Rename 'activity' to 'count'
locking/spinlocks/mcs: Micro-optimize osq_unlock()
locking/spinlocks/mcs: Introduce and use init macro and function for osq locks
locking/spinlocks/mcs: Convert osq lock to atomic_t to reduce overhead
locking/spinlocks/mcs: Rename optimistic_spin_queue() to optimistic_spin_node()
locking/rwsem: Allow conservative optimistic spinning when readers have lock
tools/liblockdep: Account for bitfield changes in lockdeps lock_acquire
tools/liblockdep: Remove debug print left over from development
tools/liblockdep: Fix comparison of a boolean value with a value of 2
In commit a21b0b354d ('perf: Introduce a flag to enable
close-on-exec in perf_event_open()'), flag PERF_FLAG_FD_CLOEXEC
was added to perf_event_open(2) syscall to allows userspace
to atomically enable close-on-exec behavor when creating
the file descriptor.
This patch makes perf tools use the new flag if supported
by the kernel, so that the event file descriptors got
automatically closed if perf tool exec a sub-command.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/1404160127-7475-1-git-send-email-ydroneaud@opteya.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
It is possible to record a perf.data file on one architecture and
process it on another.
Consequently, TSC conversion functions need to be moved out of the arch
directory.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-40-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding --debug option as a way to setup debug variables. Starting with
support for verbose, more will come.
It's possible to use it now with report command:
$ perf --debug verbose ...
$ perf --debug verbose=2 ...
I'll need this support to add separated debug variable for ordered
events change in order to separate debug output out of standard verbose
stream.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140717105500.GG516@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This way we can easily reuse current debug functions for another debug
variables other than verbose.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1405374411-29012-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving pr_* debug macros to have it with in same object as debug
variables, becase we will change them to use verbose variable in next
patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1405374411-29012-3-git-send-email-jolsa@kernel.org
[ Add missing debug.h include in python scripting glue and in the libdw unwind lib ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And use verbose as an global object in following functions:
__map_groups__fprintf_maps
__map_groups__fprintf_removed_maps
map_groups__fprintf_maps
map_groups__fprintf
Also making map_groups__fprintf_maps static.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1405374411-29012-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
__machine__findnew_thread() creates a 'struct thread' but does not free
it on the error path. Fix it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405495184-20441-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It needs to be possible to call thread__delete() on a thread with no map
groups.
This is needed for a subsequent patch which deletes a thread on the
error path before map groups have been attached.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405495184-20441-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events like sched_switch do not provide a pid (tgid) which can result in
threads with an unknown pid. If the pid is later discovered, join the
map groups.
Note the thread's map groups should be empty because they are populated
by MMAP events which do provide the pid and tid.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405498033-23817-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option to cause a selected event to be enabled immediately when
configured by perf_evsel__config().
This is needed when using the sched_switch tracepoint to follow object
code execution. By having sched_switch enabled immediately the first
sched_switch event precedes the start of other tracing.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-34-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option to prevent additional samples being added to a selected
event by perf_evsel__config().
This is needed when using the sched_switch tracepoint to follow object
code execution. Since sched_switch will be used only for switch
information, additional sampling is wasteful.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-33-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option macro that is the same as OPT_CALLBACK except that the
argument is optional and it is possible to associate additional data
with it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-31-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a feature test for __sync_val_compare_and_swap() and
__sync_bool_compare_and_swap()
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-30-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for adding more mmap parameters, pass existing parameters
in a struct.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-29-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Flag if the event stream is a file that has been mmapped in one go.
This is useful, for example, if a tool needs to keep an event for later
reference. If the new flag is set, a pointer to the event can be
retained, otherwise the event must be copied.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-28-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Expose dso__first_symbol() and dso__next_symbol() to make it possible to
iterate over a dso's symbols.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-27-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Record kallsyms binary type so that tools will not
attempt to read binary data from it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-20-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a flag to 'struct dso' to record if the dso is 64-bit or not.
Update the flag when reading the ELF.
This is needed for instruction decoding. For example, x86 instruction
decoding depends on whether or not the 64-bit instruction set is used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-18-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently a copy of kcore is not made if there is one already with the
same modules at the same addresses.
Change this to make a copy anyway if the force (-f) option is also used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
hist_entry__append_callchain() must check if the sample has a callcahin
or it will append the callchain from a previous sample.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Build Ids won't be injected unless the build id feature flag is set.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Symbols of type STT_GNU_IFUNC are functions so accept them as such.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
thread__find_addr_map() falls back to trying the kernel maps if the
address is negative and is not found in userspace maps. As commented in
the code, the kernel maps must be "loaded" before use. This patch
ensures that happens under the fallback condition also.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The comm_exec flag on the attribute can later be found in the perf.data
file allowing a tool to know in advance if the captured data has the
flag.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The value used for unknown pids cannot be zero because that is used by
the "idle" task.
Use -1 instead. Also handle the unknown pid case when creating map
groups.
Note that, threads with an unknown pid should not occur because fork (or
synthesized) events precede the thread's existence.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To python scripts, including pid, tid, and cpu for which the event was
recorded.
At the moment, the pointer to the sample struct is passed to scripts,
which seems to be of little use.
The patch puts this information in dictionaries for easy access by
Python scripts.
Signed-off-by: Joseph Schuchart <joseph.schuchart@tu-dresden.de>
Acked-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Link: http://lkml.kernel.org/r/53BE7E20.8080500@tu-dresden.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This provides valuable information for tracing performance problems.
Since this change alters the interface for the python scripts, also
adjust the script generation and the provided scripts.
Signed-off-by: Joseph Schuchart <joseph.schuchart@tu-dresden.de>
Acked-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Link: http://lkml.kernel.org/r/53BE7E1B.10503@tu-dresden.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Joseph Schuchart <joseph.schuchart@tu-dresden.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Link: http://lkml.kernel.org/r/53BD4EBF.5050407@tu-dresden.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390, the vmexit event has a tree-like structure: between
exit_event_begin and exit_event_end several other events may happen and
with each of them refining the previous ones.
This patch adds a decoder for such events to the generic code and also
the files <asm/kvm_perf.h> and kvm-stat.c for s390.
Commands 'perf kvm stat record', 'report' and 'live' are supported.
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1404397747-20939-5-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current code skips output of the x86 specific HLT event in order to
avoid flooding the output with enabled --duration option. The events to
be skipped should be architecture dependent, though.
Let's add an architecture specific array of events to be skipped and
introduce a skip_event() function checking against that array.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1404397747-20939-4-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Parts of a 'perf kvm stat' code make sense only for x86.
Let's move this code into the arch/x86/kvm-stat.c file and add
util/kvm-stat.h for generic structure definitions.
Add a global array 'kvm_reg_events_ops' for accessing the arch-specific
'kvm_events_ops' from generic code.
Since the several global arrays (i.e. 'kvm_events_tp') have been moved
to arch/*, we can not know their sizes and use them directly in
builtin-kvm.c. This patch fixes that problem by adding trimming NULL
element to each array and changing the behavior of their handlers in
generic code.
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1404397747-20939-3-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently perf-kvm uses string literals for kvm event names, but it
works only for x86, because other architectures may have other names for
those events.
To reduce dependence on architecture, we add <asm/kvm_perf.h> file with
defines for:
- kvm_entry and kvm_exit events,
- exit reason field name in kvm_exit event,
- length of exit reasons strings,
- vcpu_id field name in kvm trace events,
and replace literals in perf-kvm.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1404397747-20939-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"Tooling fixes and an Intel PMU driver fixlet"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Do not allow optimized switch for non-cloned events
perf/x86/intel: ignore CondChgd bit to avoid false NMI handling
perf symbols: Get kernel start address by symbol name
perf tools: Fix segfault in cumulative.callchain report
Currently, timechart records only scheduler and CPU events (task switches,
running times, CPU power states, etc); this commit adds IO mode which
makes it possible to record IO (disk, network) activity. In this mode
perf timechart will generate SVG with IO charts (writes, reads, tx, rx, polls).
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/1404835423-23098-3-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Firefox doesn't correctly handle cases where we specify number in
quotes and have some padding around the number, like the following:
<rect ... height=" 3.1" ...>
In this case, it doesn't draw the figure. This patch removes 'field width'
component from fprintf strings to fix it.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/1404835423-23098-2-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
CC /tmp/build/perf/builtin-trace.o
builtin-trace.c: In function 'print_location':
builtin-trace.c:1792:4: error: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'u64' [-Werror=format]
builtin-trace.c:1794:3: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'u64' [-Werror=format]
builtin-trace.c:1796:3: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'u64' [-Werror=format]
cc1: all warnings being treated as errors
make[1]: *** [/tmp/build/perf/builtin-trace.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [install-bin] Error 2
make: Leaving directory `/home/acme/git/linux/tools/perf'
acme@linux-goap:~/git/linux> uname -a
Linux linux-goap 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) i686 i686 i386 GNU/Linux
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-843p3aqbw531eqiu2hah8o9p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
# id
uid=0(root) gid=0(root) groups=0(root)
# ls -la perf.data
-rw-------. 1 acme acme 20720 Jul 8 11:35 perf.data
Previously:
# perf report
file perf.data not owned by current user or root
Now:
# perf report
File perf.data not owned by current user or root (use -f to override)
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0j2wuuegnhv3gljbil8ld6kx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull thermal fixes from Zhang Rui:
"Specifics:
- update Email address of Thermal subsystem maintainer Eduardo
Valentin.
- fix a problem that unloading thermal module results in kernel crash
because a non-exist device file is removed on thermal unload.
- fix a problem that critical trip point is set wrongly on latest
i.MX6 SOC and results in system critical shutdown.
- a couple of fixes to Tmon tool, of-thermal code and ti thermal
driver"
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
tmon: set umask to a reasonable value
tmon: Check log file for common secuirty issues
tools/thermal: tmon: fix compilation errors when building statically
thermal: ti-soc-thermal: ti-bandgap.c: Cleaning up wrong address is checked
Thermal: imx: correct critical trip temperature setting
thermal: Bind cooling devices with the correct arguments
thermal: Add braces around suspect code
thermal: hwmon: Make the check for critical temp valid consistent
MAINTAINERS: Update Eduardo Valentin's email address
The following snippet
V = malloc(S);
if (!V) { }
sprintf(V, ...)
Can be easily changed to a one line:
if (asprintf(&V, ...) < 0) { }
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/1404474229-15272-1-git-send-email-andriy.shevchenko@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch defines CPUINFO_PROC for s390 and implements get_cpuid().
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/87ioneo7qh.wl%yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cpu_isa_config() does two different things: searching for cpuid and
initializing perf_kvm_stat struct with proper parameters.
Let's move initialization to a separate function cpu_isa_init(), which
is used to initialize all possible ISAs and can be used to init
arch-depended things.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1404395992-17095-4-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_kvm_stat struct keeps the size of a table of exit reasons in
the field 'exit_reasons_size'.
The field is initialized and then used by get_exit_reason() for serial
access to the table, so that the calling function does not actually need
to know table size.
Usage of tables with 'end of sequence' marker simplifies the
get_exit_reason() function.
Also the patch introduces a define_exit_reasons_table, which makes it
easier to define new tables.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1404395992-17095-3-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kvm stat support is currently conditional on i386/x86_64. Let's abstract
this into a HAVE_KVM_STAT_SUPPORT flag, so that other architectures can
support kvm stat as well.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1404395992-17095-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Looks better and avoids it moving to the end of the screen as the column
width changes over time in 'perf top'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-yc144ai5jye3yl3h5yxw0scd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding ui.show-headers config file option to define if the histogram
entries headers will start visible or not.
Currently columns headers are displayed by default, following
lines in ~/.perfconfig file will disable that:
[ui]
show-headers = false
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1403886418-5556-4-git-send-email-jolsa@kernel.org
[ renamed symbol_conf.show_headers to .show_hist_headers ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit fb9edbe984 shortened held_lock->check from a 2-bit field
to a 1-bit field.
Make liblockdep compatible with the new definition by passing check=1
to lock_acquire() calls, rather than the old value check=2 (which
inadvertently disabled checks by overflowing to 0).
Without this fix, several of the test cases in liblockdep run_tests.sh
were failing.
Signed-off-by: S. Lockwood-Childs <sjl@vctlabs.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Remove a debug print in init_preload() which was left over from
development and isn't usefull at all currently. It was also causing
false positive test results.
Reported-by: S. Lockwood-Childs <sjl@vctlabs.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Comparison of a boolean value (!__init_state) with a value of 2 (done)
as currently happens in the code is unlikely to succeed and causes
repeated initialization of the pthread function pointers.
Instead, remove boolean comparison so that we would initialize said
function pointers only once.
Ref: https://bugzilla.kernel.org/show_bug.cgi?id=76741
Cc: Jean Delvare <jdelvare@suse.de>
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Dianfang Zhang <zhangdianfang@huawei.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Displaying columns header text whenever 'H' is pressed,
and hiding it on on another press.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-w9pcqpum5erza2a05ysvollz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Open up space to show a one-line header text whenever 'H' is pressed,
hide it on another key press.
Follow up patch will format this line from the set of headers used.
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-m894d6qk30h3qofw4k8neq4q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This requires some more work so that we can really just use the width of
current entries when we want to partition the screen.
Right now its just a prep patch so that we can have where to update
ui_browser->rows when introducing the column headers line, that will be
togglable, so we need to update it everytime we refresh the dimensions
of the browser.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ovk654rx525b4657y0mh6ku9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That will allow us to add a row offset to open up space for the column
headers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-otc3ployokfci5qi81o7jo22@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some browsers, like the hist_browser, may want to be notified everytime
a refresh_dimensions is needed, so that it can reset ui_browser->rows,
for instance, or do some other related reaction to screen resizings.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ielvluuemzn30bneh0zk3twi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ui_browser->height is about the whole browser "window", including
any header, status lines or any other space needed for some "Yes", "No",
etc buttons a descendent browser, like hist_browser, may have.
Since the navigation is done mostly on the ui_browser methods, it needs
to know how many rows are on the screen, while details about what other
components are, say, if a header (that may be composed of multiple
lines, etc) is present.
Besides this we'll need to add a ui_browser->refresh_dimensions() hook
so that browsers like hist_browser can update ->rows in response to
screen resizes, this will come in a follow up patch.
This patch just adds ->rows and updates it when updating ->height, keeps
using ->height for the only other widget that can come with ui_browser,
the scrollbar, that goes on using all the height on the rightmost column
in the screen, using ->rows for the keyboard navigation needs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xexmwg1mv7u03j5imn66jdak@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
. Handle the num array type in python properly (Sebastian Andrzej Siewior)
. Fix wrong condition for allocation failure (Jiri Olsa)
. Adjust callchain based on DWARF debug info on powerpc (Sukadev Bhattiprolu)
. Fix a risk for doing free on uninitialized pointer in traceevent lib (Rickard Strandqvist)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJTrV0JAAoJEPZqUSBWB3s9jSkQALaV/hiYlEJ/WM5IonwTRSXv
77LhfE6aHqilXDiHeMNmkNhP5EVXvfpx9r6zSMqwOatsFxugYZfT0VZeGMnze1Xe
S6cf1oydSDir3If+Z8lEIo3MFGZQ6WN2rrocOgSUuVyZuC0tUDPSMbl9E+D/q6Yf
sLXCvwKozqUWGnlmSfwBhSysWemZg7HsAdyyROnesYTPfD7R6R8SgT2sy6UXXtFp
W+9dbxvrjReb9j2bHxmnPHSklCLRzun90IEYJQP8x2dUQUhEELDtIHgjFdFAYUzm
CEmwWWbZrIDQhBAxDqGsH+Rd3lvF/a+ZyUEFo+bT+PVUeNPylPMtSJYNCKsX1YLO
asE5XdFjZnMfZO6S3Ou/e0R1jixZgMYT47ivlcbK9ZkHhb4KWAuhoN+dc4PKrIGv
dbvOMEIu/x8kdd+AuLir3LdOruebDiwpqOffVsa01VKv+2kDTWTlaQNhx/0MHkdg
nc1DHjly/xFzZXVjWrIpIkPZbf/lsBkbV92mAhA0eEhooTlAHwwouKWd8RyazWQr
PBb0QzJJLxZAiCYj1h5Is+5i2PTE4re8k7XmF1Jq85TCJLI2ahdkvxk0bt67rAy7
7U0D/mOfCAHVtTY/fjcVP81h4lRNR4ITW/Uml0nb1rSnsJmmayx/y6kEvScR8Qbj
2YgC+QkETEBQ9npiHPmk
=q+MF
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/core
Pull perf/core improvements and fixes from Jiri Olsa:
* Handle the num array type in python properly (Sebastian Andrzej Siewior)
* Fix wrong condition for allocation failure (Jiri Olsa)
* Adjust callchain based on DWARF debug info on powerpc (Sukadev Bhattiprolu)
* Fix a risk for doing free on uninitialized pointer in traceevent lib (Rickard Strandqvist)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Here's a round of USB bugfixes, quirk additions, and new device ids for
3.16-rc4. Nothing major in here at all, just a bunch of tiny changes.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlO1+wwACgkQMUfUDdst+ylcuACfbIytKMfxNcmq2xG6AExXbVSl
IQAAnAvv4QjqzbtSVWaNZB/Kkxzh4xeN
=Igpa
-----END PGP SIGNATURE-----
Merge tag 'usb-3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB bugfixes from Greg KH:
"Here's a round of USB bugfixes, quirk additions, and new device ids
for 3.16-rc4. Nothing major in here at all, just a bunch of tiny
changes. All have been in linux-next with no reported issues"
* tag 'usb-3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
usb: chipidea: udc: delete td from req's td list at ep_dequeue
usb: Kconfig: make EHCI_MSM selectable for QCOM SOCs
usb-storage/SCSI: Add broken_fua blacklist flag
usb: musb: dsps: fix the base address for accessing the mode register
tools: ffs-test: fix header values endianess
usb: phy: msm: Do not do runtime pm if the phy is not idle
usb: musb: Ensure that cppi41 timer gets armed on premature DMA TX irq
usb: gadget: gr_udc: Fix check for invalid number of microframes
usb: musb: Fix panic upon musb_am335x module removal
usb: gadget: f_fs: resurect usb_functionfs_descs_head structure
Revert "tools: ffs-test: convert to new descriptor format fixing compilation error"
xhci: Fix runtime suspended xhci from blocking system suspend.
xhci: clear root port wake on bits if controller isn't wake-up capable
xhci: correct burst count field for isoc transfers on 1.0 xhci hosts
xhci: Use correct SLOT ID when handling a reset device command
MAINTAINERS: update e-mail address
usb: option: add/modify Olivetti Olicard modems
USB: ftdi_sio: fix null deref at port probe
MAINTAINERS: drop two usb-serial subdriver entries
USB: option: add device ID for SpeedUp SU9800 usb 3g modem
...
The test fails in the middle when it is not run as root while accessing
/proc/sys/kernel/msg_next_id. Changed it to check for root at the
beginning of the test and exit if not root.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
on-off-test uses "$UID != 0" to test for root, but $UID is a construct
specific to bash. Using /bin/sh that isn't bash results in the
following error (due to the "$UID" part expanding to nothing):
./on-off-test.sh: 9: [: !=: unexpected operator
Change Makefile to use bash instead.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
on-off-test uses "$UID != 0" to test for root, but $UID is a construct
specific to bash. Using /bin/sh that isn't bash results in the
following error (due to the "$UID" part expanding to nothing):
./on-off-test.sh: 9: [: !=: unexpected operator
Change Makefile to use bash instead.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the tmon umask value is set to 0, which means whatever the permission
mask in the shell are when starting tmon in daemon mode are what the permissions
of any created files will be. We should likely set something more explicit, so
lets go with the usual 022
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
The tmon logging system blindly opens its log file on a static path, making it
very easy for someone to redirect that log information to inappropriate places
or overwrite other users data. Do some easy checking to make sure we're not
logging to a symlink or a file owned by another user.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
A few more fixes for this RC cycle. There's a revert of a previous patch
which ended up being the wrong version, so we reverted that commit and
applied a better fix.
CPPI41 got a race condition fix which was found by Thomas Gleixner.
The MSM PHY driver got a runtime pm usage fix so that it wouldn't
kill the PHY while it was still being used.
We also have a fix for a panic caused when removing musb_am335x driver.
Other than that, a few other minor fixes.
Signed-of-by: Felipe Balbi <balbi@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7Mt5
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v3.16-rc4
A few more fixes for this RC cycle. There's a revert of a previous patch
which ended up being the wrong version, so we reverted that commit and
applied a better fix.
CPPI41 got a race condition fix which was found by Thomas Gleixner.
The MSM PHY driver got a runtime pm usage fix so that it wouldn't
kill the PHY while it was still being used.
We also have a fix for a panic caused when removing musb_am335x driver.
Other than that, a few other minor fixes.
Signed-of-by: Felipe Balbi <balbi@ti.com>
tmon fails to build statically with the following error:
$ make LDFLAGS=-static
gcc -O1 -Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int -fstack-protector -D VERSION=\"1.0\" -static tmon.o tui.o sysfs.o pid.o -o tmon -lm -lpanel -lncursesw -lpthread
tmon.o: In function `tmon_sig_handler':
tmon.c:(.text+0x21): undefined reference to `stdscr'
tmon.o: In function `tmon_cleanup':
tmon.c:(.text+0xb9): undefined reference to `stdscr'
tmon.c:(.text+0x11e): undefined reference to `stdscr'
tmon.c:(.text+0x123): undefined reference to `keypad'
tmon.c:(.text+0x12d): undefined reference to `nocbreak'
tmon.o: In function `main':
tmon.c:(.text+0x785): undefined reference to `stdscr'
tmon.c:(.text+0x78a): undefined reference to `nodelay'
tui.o: In function `setup_windows':
tui.c:(.text+0x131): undefined reference to `stdscr'
tui.c:(.text+0x176): undefined reference to `stdscr'
tui.c:(.text+0x19f): undefined reference to `stdscr'
tui.c:(.text+0x1cc): undefined reference to `stdscr'
tui.c:(.text+0x1ff): undefined reference to `stdscr'
tui.o:tui.c:(.text+0x229): more undefined references to `stdscr' follow
tui.o: In function `show_cooling_device':
[...]
stdscr() and friends are in libtinfo (part of ncurses) so add it to
the libraries that are linked in when compiling tmon to fix it.
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
It appears that no one ever run ffs-test on a big-endian machine,
since it used cpu-endianess for fs_count and hs_count fields which
should be in little-endian format. Fix by wrapping the numbers in
cpu_to_le32.
Cc: stable@vger.kernel.org
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The raw_syscalls:sys_enter tracer for instance passes has one argument
named 'arg' which is an array of 6 integers. Right the python scripts
gets only 0 passed as an argument. The reason is that
pevent_read_number() can not handle data types of 48 and returns always
0.
This patch changes this by passing num array as list of nums which fit
the description. As a result python will now see a list named arg which
contains 6 (integer) items.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/1401207274-8170-2-git-send-email-bigeasy@linutronix.de
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
I was going to change something here and the result was so much on the
right side of the screen that I decided to move that piece into its own
function.
This patch should make no function change except the moving the code
into its own function.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/1401207274-8170-1-git-send-email-bigeasy@linutronix.de
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
When saving the callchain on Power, the kernel conservatively saves excess
entries in the callchain. A few of these entries are needed in some cases
but not others. We should use the DWARF debug information to determine
when the entries are needed.
Eg: the value in the link register (LR) is needed only when it holds the
return address of a function. At other times it must be ignored.
If the unnecessary entries are not ignored, we end up with duplicate arcs
in the call-graphs.
Use the DWARF debug information to determine if any callchain entries
should be ignored when building call-graphs.
Callgraph before the patch:
14.67% 2234 sprintft libc-2.18.so [.] __random
|
--- __random
|
|--61.12%-- __random
| |
| |--97.15%-- rand
| | do_my_sprintf
| | main
| | generic_start_main.isra.0
| | __libc_start_main
| | 0x0
| |
| --2.85%-- do_my_sprintf
| main
| generic_start_main.isra.0
| __libc_start_main
| 0x0
|
--38.88%-- rand
|
|--94.01%-- rand
| do_my_sprintf
| main
| generic_start_main.isra.0
| __libc_start_main
| 0x0
|
--5.99%-- do_my_sprintf
main
generic_start_main.isra.0
__libc_start_main
0x0
Callgraph after the patch:
14.67% 2234 sprintft libc-2.18.so [.] __random
|
--- __random
|
|--95.93%-- rand
| do_my_sprintf
| main
| generic_start_main.isra.0
| __libc_start_main
| 0x0
|
--4.07%-- do_my_sprintf
main
generic_start_main.isra.0
__libc_start_main
0x0
TODO: For split-debug info objects like glibc, we can only determine
the call-frame-address only when both .eh_frame and .debug_info
sections are available. We should be able to determin the CFA
even without the .eh_frame section.
Fix suggested by Anton Blanchard.
Thanks to valuable input on DWARF debug information from Ulrich Weigand.
Reported-by: Maynard Johnson <maynard@us.ibm.com>
Tested-by: Maynard Johnson <maynard@us.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20140625154903.GA29607@us.ibm.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Fix a risk of doing free on an uninitialized pointer.
This was found using a static code analysis program called cppcheck.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Link: http://lkml.kernel.org/r/1403608150-13037-1-git-send-email-rickard_strandqvist@spectrumdigital.se
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
This patch adds optional pagefault tracing support to 'perf trace'.
Using -F/--pf option user can specify whether he wants minor, major or
all pagefault events to be traced. This patch adds only live mode,
record and replace will come in a separate patch.
Example output:
1756272.905 ( 0.000 ms): curl/5937 majfault [0x7fa7261978b6] => /usr/lib/x86_64-linux-gnu/libkrb5.so.26.0.0@0x85288 (d.)
1862866.036 ( 0.000 ms): wget/8460 majfault [__clear_user+0x3f] => 0x659cb4 (?k)
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1403799268-1367-3-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will be used by next pagefault tracing patches in the series.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1403799268-1367-2-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Older kernels (e.g., RHEL6) do system call tracing via the
syscalls:sys_{enter,exit} tracepoints rather than using raw_syscalls:*.
Update perf python and perl scripts to fallback to syscalls:* when
raw_syscalls:* isn't available.
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/5a6c64081a3375bc3bc66351b14559678ef4d71e.1402507908.git.bristot@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull powerpc fixes and cleanups from Ben Herrenschmidt:
"Here are a handful or two of powerpc fixes and simple/trivial
cleanups. A bunch of them fix ftrace with the new ABI v2 in Little
Endian, the rest is a scattering of fairly simple things"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Don't skip ePAPR spin-table CPUs
powerpc/module: Fix TOC symbol CRC
powerpc/powernv: Remove OPAL v1 takeover
powerpc/kmemleak: Do not scan the DART table
selftests/powerpc: Use the test harness for the TM DSCR test
powerpc/cell: cbe_thermal.c: Cleaning up a variable is of the wrong type
powerpc/kprobes: Fix jprobes on ABI v2 (LE)
powerpc/ftrace: Use pr_fmt() to namespace error messages
powerpc/ftrace: Fix nop of modules on 64bit LE (ABIv2)
powerpc/ftrace: Fix inverted check of create_branch()
powerpc/ftrace: Fix typo in mask of opcode
powerpc: Add ppc_global_function_entry()
powerpc/macintosh/smu.c: Fix closing brace followed by if
powerpc: Remove __arch_swab*
powerpc: Remove ancient DEBUG_SIG code
powerpc/kerenl: Enable EEH for IO accessors
User visible:
. Add --repeat global option to 'perf bench' to be used in benchmarks
such as the existing 'futex' one, that was modified to use it instead
of a local option. (Davidlohr Bueso)
. Fix fd -> pathname resolution in 'trace', be it using /proc or
a vfs_getname probe point. (Arnaldo Carvalho de Melo)
. Add suggestion of how to set perf_event_paranoid sysctl, to help
non-root users trying tools like 'trace' to get a working environment.
(Arnaldo Carvalho de Melo)
Fixes:
. Fix memory leak in the 'sched-messaging' perf bench test. (Davidlohr Bueso)
. The -o and -n 'perf bench mem' options are mutually exclusive, emit error
when both are specified. (Davidlohr Bueso)
. Fix scrollbar refresh row index in the ui browser, problem exposed now
that headers will be added and will be allowed to be switched on/off.
(Jiri Olsa)
Cleanups:
. Remove needless reassignments in 'trace' (Arnaldo Carvalho de Melo)
. Cache the is_exit syscall test in 'trace) (Arnaldo Carvalho de Melo)
. No need to reimplement err() in 'perf bench sched-messaging', drop barf().
(Davidlohr Bueso).
. Remove ev_name argument from perf_evsel__hists_browse, can be obtained
from the other parameters. (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0Pfk
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
* Add --repeat global option to 'perf bench' to be used in benchmarks
such as the existing 'futex' one, that was modified to use it instead
of a local option. (Davidlohr Bueso)
* Fix fd -> pathname resolution in 'trace', be it using /proc or
a vfs_getname probe point. (Arnaldo Carvalho de Melo)
* Add suggestion of how to set perf_event_paranoid sysctl, to help
non-root users trying tools like 'trace' to get a working environment.
(Arnaldo Carvalho de Melo)
Fixes:
* Fix memory leak in the 'sched-messaging' perf bench test. (Davidlohr Bueso)
* The -o and -n 'perf bench mem' options are mutually exclusive, emit error
when both are specified. (Davidlohr Bueso)
* Fix scrollbar refresh row index in the ui browser, problem exposed now
that headers will be added and will be allowed to be switched on/off.
(Jiri Olsa)
Cleanups:
* Remove needless reassignments in 'trace' (Arnaldo Carvalho de Melo)
* Cache the is_exit syscall test in 'trace) (Arnaldo Carvalho de Melo)
* No need to reimplement err() in 'perf bench sched-messaging', drop barf().
(Davidlohr Bueso).
* Remove ev_name argument from perf_evsel__hists_browse, can be obtained
from the other parameters. (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
dwc3-omap won't crash anymore on module removal and suspend/resume won't kill
xHCI interrupts.
MUSB got a fix to handle Babble condition only in host mode, how it should be.
The f_fs function driver got a fix for a NULL pointer dereference.
Renesas gadget got a fix for Status stage handling.
Signed-of-by: Felipe Balbi <balbi@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZVy4
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
usb: fixes for v3.16-rc2
dwc3-omap won't crash anymore on module removal and suspend/resume won't kill
xHCI interrupts.
MUSB got a fix to handle Babble condition only in host mode, how it should be.
The f_fs function driver got a fix for a NULL pointer dereference.
Renesas gadget got a fix for Status stage handling.
Signed-of-by: Felipe Balbi <balbi@ti.com>
This gives us standardised success/failure output and also handles
killing the test if it runs forever (2 minutes).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The function machine__get_kernel_start_addr() was taking the first symbol
of kallsyms as the start address. This is incorrect in certain cases
where the first symbol is something at 0, while the actual kernel
functions begin at a later point (e.g. 0x80200000).
This patch fixes machine__get_kernel_start_addr() to search for the
symbol "_text" or "_stext", which marks the beginning of kernel mapping.
This was already being done in machine__create_kernel_maps(). Thus, this
patch is just a refactor, to move that code into
machine__get_kernel_start_addr().
Signed-off-by: Simon Que <sque@chromium.org>
Link: http://lkml.kernel.org/r/1402943529-13244-1-git-send-email-sque@chromium.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
When cumulative callchain mode is on, we could get samples with
with no actual hits. This breaks the assumption of the annotation
code, that each sample has annotation counts allocated and leads
to segfault.
Fixing this by additional checks for annotation stats.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1402821332-12419-1-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Instead of reinventing the wheel, we can use err(2) when dealing with
fatal errors. Exit code is now always EXIT_FAILURE (1).
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1402942467-10671-9-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-o, --only-prefault Show only the result with page faults before mem*
-n, --no-prefault Show only the result without page faults before mem*
Makes no sense to call together. Applies to both memset and memcpy.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1402942467-10671-8-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This option is available through perf-bench, use it instead and free the
local option.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1402942467-10671-6-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are a number of benchmarks that do single runs and as a result
does not really help users gain a general idea of how the workload
performs. So the user must either manually do multiple runs or just use
single bogus results.
This option will enable users to specify the amount of runs (arbitrarily
defaulted to 10, to use the existing benchmarks default) through the
'--repeat' option. Add it to perf-bench instead of implementing it
always in each specific benchmark.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1402942467-10671-2-git-send-email-davidlohr@hp.com
[ Kept the existing default of 10, changing it to something else should
be done on separate patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ui_browser__gotorc function needs offset from 'y' member, so the row
index has to begin with 0, which happens by accident in current code,
because we display only one header line.
The bug shows when we want to display more than 1 header lines like
columns headers in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1403178076-14072-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing ev_name argument from perf_evsel__hists_browse function,
because it's not needed. We can get the name out of the 'struct
perf_evsel' which is passed as argument as well.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1403178076-14072-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to use two strcmp calls per syscall entry, do it just once, when
reading the per syscall info.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lymtxhz0mg3adyt5e2pssn8f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter
Linus Torvalds
Jiri Olsa
Yann Droneaud
Jiri Olsa
Joseph Schuchart
Alexander Yarygin
Ingo Molnar
Stanislav Fomichev
Arnaldo Carvalho de Melo
Andy Shevchenko
S. Lockwood-Childs
Sasha Levin
zhangdianfang
Shuah Khan
Neil Horman
Greg Kroah-Hartman
Javi Merino
Michal Nazarewicz
Felipe Balbi
Sebastian Andrzej Siewior
Sukadev Bhattiprolu
Rickard Strandqvist
Daniel Bristot de Oliveira
Michael Ellerman
Simon Que
Davidlohr Bueso