Граф коммитов

5243 Коммитов

Автор SHA1 Сообщение Дата
Benjamin Tissoires 522214d9be Input: rmi4 - f30: detect INPUT_PROP_BUTTONPAD from the button count
INPUT_PROP_BUTTONPAD is currently only set through the platform data.
The RMI4 header doc says that this property is there to force the
buttonpad property, so we also need to detect it by looking at
the exported buttons count.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-01 10:01:56 -08:00
Alexey Dobriyan 5b5e0928f7 lib/vsprintf.c: remove %Z support
Now that %z is standartised in C99 there is no reason to support %Z.
Unlike %L it doesn't even make format strings smaller.

Use BUILD_BUG_ON in a couple ATM drivers.

In case anyone didn't notice lib/vsprintf.o is about half of SLUB which
is in my opinion is quite an achievement.  Hopefully this patch inspires
someone else to trim vsprintf.c more.

Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Linus Torvalds 1ec5c1867a This is the bulk of GPIO changes for the v4.11 cycle
Core changes:
 
 - Augment fwnode_get_named_gpiod() to configure the GPIO pin
   immediately after requesting it like all other APIs do.
   This is a treewide change also updating all users.
 
 - Pass a GPIO label down to gpiod_request() from
   fwnode_get_named_gpiod(). This makes debugfs and the userspace
   ABI correctly reflect the current in-kernel consumer of a pin
   taken using this abstraction. This is a treewide change also
   updating all users.
 
 - Rename devm_get_gpiod_from_child() to
   devm_fwnode_get_gpiod_from_child() to reflect the fact that this
   function is operating on a fwnode object. This is a treewide
   change also updating all users.
 
 - Make it possible to take multiple GPIOs in a single hog of device
   tree hogs.
 
 - The refactorings switching GPIO chips to use the .set_config()
   callback using standard pin control properties and providing
   a backend into the pin control subsystem that were also merged
   into the pin control tree naturally appear here too.
 
 Testing instrumentation:
 
 - A whole slew of cleanups and improvements to the mockup GPIO
   driver. We now have an extended userspace test exercising the
   subsystem, and we can inject interrupts etc from userspace
   to fully test the core GPIO functionality.
 
 New drivers:
 
 - New driver for the Cortina Systems Gemini GPIO controller.
 
 - New driver for the Exar XR17V352/354/358 chips.
 
 - New driver for the ACCES PCI-IDIO-16 PCI GPIO card.
 
 Driver changes:
 
 - RCAR: set the irqchip parent device, add fine-grained runtime
   PM support.
 
 - pca953x: support optional RESET control line on the chip.
 
 - DaVinci: cleanups and simplifications. Add support for multiple
   instances.
 
 - .set_multiple() and naming of lines on more or less all of the
   ISA/PCI GPIO controllers.
 
 - mcp23s08: refactored to use regmap as a first step to further
   rewrites and modernizations.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYrqvqAAoJEEEQszewGV1zoHsP/i1iZBEywR9+yIx/p2/F2mJu
 nriuYFlp0V3FjHQAQ//YCA9+Catri+ZqT5l+BmG/EYdqqikHbziTyS0YArlfrMHv
 OOBfDmfftexvRI/jQAl+X/nIW531ZjYo6ZApFy/2TirTwfkI7DIMi6ujm09fcG5D
 BgCT1KuszbVtyrmhrQvbeEdVKw0qLAgwnn5eOOCQE4KuDB3s7eyal0rJaDEXhpMF
 kH/y6eySs4FChEhAEmCkM6205F5T4c2YFjL1bo5Fkh/WPrVPaKI0Ny16qbaDWU9K
 W9RaJUzf92KIW0MgcRl+r8Lxn+GekN6/jvrxddQ/Ajs/Dkh5r2JCrm7RIC9tBPcJ
 VbLfjL+cMehlSEu9eyxRQcAIeuUYCqkN8ghuVoj9xt/tDtNYsQIcJZtfW1yjmONq
 mFsd5KhfBFgspQkwF4IX3hthaqj8MH4zefQdWzAGPZMGEA1rrx2kVSEdZD3EV4VN
 84qt5Cx9hLllafthJOGjEIZFCjPIpbMRwTQ+fmc+1IB1DgN8Kc5E1FMssKbUEoOK
 2eLquLvd7iNDMidTjoi87YAisW9qnrPeRDywsqeXdQf7fzpB97gX4MQfJ5fJWEYr
 3uHCfu2u4J4cff9ygg8c4ut7ePEjz+ld/sBh9EHicbbryR4I5ZG7Ne1aQhsmb2M5
 dHZSRfQYEQ4Nl7cMJQuh
 =O81I
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.11 cycle

  Core changes:

   - Augment fwnode_get_named_gpiod() to configure the GPIO pin
     immediately after requesting it like all other APIs do. This is a
     treewide change also updating all users.

   - Pass a GPIO label down to gpiod_request() from
     fwnode_get_named_gpiod(). This makes debugfs and the userspace ABI
     correctly reflect the current in-kernel consumer of a pin taken
     using this abstraction. This is a treewide change also updating all
     users.

   - Rename devm_get_gpiod_from_child() to
     devm_fwnode_get_gpiod_from_child() to reflect the fact that this
     function is operating on a fwnode object. This is a treewide change
     also updating all users.

   - Make it possible to take multiple GPIOs in a single hog of device
     tree hogs.

   - The refactorings switching GPIO chips to use the .set_config()
     callback using standard pin control properties and providing a
     backend into the pin control subsystem that were also merged into
     the pin control tree naturally appear here too.

  Testing instrumentation:

   - A whole slew of cleanups and improvements to the mockup GPIO
     driver. We now have an extended userspace test exercising the
     subsystem, and we can inject interrupts etc from userspace to fully
     test the core GPIO functionality.

  New drivers:

   - New driver for the Cortina Systems Gemini GPIO controller.

   - New driver for the Exar XR17V352/354/358 chips.

   - New driver for the ACCES PCI-IDIO-16 PCI GPIO card.

  Driver changes:

   - RCAR: set the irqchip parent device, add fine-grained runtime PM
     support.

   - pca953x: support optional RESET control line on the chip.

   - DaVinci: cleanups and simplifications. Add support for multiple
     instances.

   - .set_multiple() and naming of lines on more or less all of the
     ISA/PCI GPIO controllers.

   - mcp23s08: refactored to use regmap as a first step to further
     rewrites and modernizations"

* tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (61 commits)
  gpio: reintroduce devm_get_gpiod_from_child()
  gpio: pci-idio-16: Fix PCI BAR index
  gpio: pci-idio-16: Fix PCI device ID code
  gpio: mockup: implement event injecting over debugfs
  gpio: mockup: add a dummy irqchip
  gpio: mockup: implement naming the lines
  gpio: mockup: code shrink
  gpio: mockup: readability tweaks
  gpio: Add GPIO support for the ACCES PCI-IDIO-16
  gpio: Add the devm_fwnode_get_index_gpiod_from_child() helper
  gpio: Rename devm_get_gpiod_from_child()
  gpio: mcp23s08: Select REGMAP/REGMAP_I2C to fix build error
  gpio: ws16c48: Add support for GPIO names
  gpio: gpio-mm: Add support for GPIO names
  gpio: 104-idio-16: Add support for GPIO names
  gpio: 104-idi-48: Add support for GPIO names
  gpio: 104-dio-48e: Add support for GPIO names
  gpio: ws16c48: Remove unnecessary driver_data set
  gpio: gpio-mm: Remove unnecessary driver_data set
  gpio: 104-idio-16: Remove unnecessary driver_data set
  ...
2017-02-23 08:46:04 -08:00
Dmitry Torokhov 6e11617fcf Merge branch 'next' into for-linus
Prepare input updates for 4.11 merge window.
2017-02-20 15:16:02 -08:00
Javier Martinez Canillas a1b5359271 Input: zet6223 - export OF device ID as module aliases
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.

Before this patch:

$ modinfo drivers/input/touchscreen/zet6223.ko | grep alias
alias:          i2c:zet6223

After this patch:

$ modinfo drivers/input/touchscreen/zet6223.ko | grep alias
alias:          of:N*T*Czeitec,zet6223C*
alias:          of:N*T*Czeitec,zet6223
alias:          i2c:zet6223

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-20 15:12:26 -08:00
Dmitry Torokhov b0c9d043d4 Subsequent immutable branch between MFD and Input due for the v4.11 merge window
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJYoXvBAAoJEFGvii+H/HdhPCMP/1KAxTGNt/6405t/5mTf1+Fz
 YtxyLTqZq9cpECYmbFiiyFaP4/VJTLVkesmNbji8RD8pR5UpGLS0f/HLKxs/M9dv
 bOwnk0kRhFiZ0ozE+bEmcNEqUZRPb1uNhaiD2z5qphBQgYGFRDl6TbajSnCi/UaE
 wfcJcDdI29Z/6BYQPSqKhcSQsZSowoVdHA1uIcTJ5Oq5pvnmwL8IVP9Rj++FUafI
 bElqpIZeFffbORKJUjRpp6vmhB2IDcmBxj5aayB6Q4ItbuQ17yzBI5Mgy+j+6/dc
 Q+k5JKLwskMk4uoDKka0RYODtmrEjxnIz+6EzDvQbk14EZ5duDfecNaCaE0RAcXC
 0O5VAdBifygjI+QuV9Wu5FaOhwl+1cxcecRtq0YEutbPYl1UHERRG88Ys1xOIHpg
 jGQB06JVbwzQ1a2BkGZRBIGhv1cSEIcEM9mQ1Iq6ZKrsqdma60dqgsYb/dQ7Fn6E
 4Tk+WZsaPjM2bwOKU4xjm/itO1tYdNA2mOy+K8EXgMq5XrwuinderJpdhx/Lg5Z8
 h2Qv10LixZA61gotJ8TNKJF1KaHEGudfqfvt+iUn0LxtXJ3dDuiRxmVuGTZrdNN3
 0RmmjF0A5GzZ2JBPV+p3lZksWNP7yvm2btANNuAquwlkupEVhc3YY8hcKkgKC6dM
 0r9rh75NxpdQ9bl22QUP
 =wmTw
 -----END PGP SIGNATURE-----

Merge tag 'ib-mfd-input-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge in cros-ec changes applied through MFD branch to resolve
conflicts.
2017-02-15 09:24:23 -08:00
Gwendal Grignou 6ccc3a3381 input: cros_ec_keyb: Add Tablet Mode switch
Add switch to report tablet mode.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-13 09:25:19 +00:00
IHARA Hiroka 722c5ac708 Input: elan_i2c - add ELAN0605 to the ACPI table
ELAN0605 has been confirmed to be a variant of ELAN0600, which is
blacklisted in the hid-core to be managed by elan_i2c. This device can be
found in Lenovo ideapad 310s (80U4000).

Signed-off-by: Hiroka IHARA <ihara_h@live.jp>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-12 18:36:49 -08:00
Dmitry Torokhov d0d89493bf Input: tsc2004/5 - switch to using generic device properties
Instead of supporting legacy platform data (of which we have no mainline
users) and OF-based properties, let's switch to generic device properties.
This will still allow legacy boards to use the driver (by defining property
sets and attaching them to the drivers) and will simplify probe and make
driver usable on ACPI-based systems as well.

Reviewed-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-12 14:55:09 -08:00
Dmitry Torokhov f7bf6f5867 Input: tsc2004/5 - fix regulator handling
In case of an optional regulator missing, regulator core will return
ERR_PTR(-ENOENT) and not NULL, so the check for missing regulator is
incorrect. Also, the regulator is not optional, it may simply be missing
from platform description, so let's use devm_regulator_get() and rely on
regulator core to give us dummy supply when real one is not available.

Fixes: d257f2980f ("Input: tsc2005 - convert to gpiod")
Acked-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-12 14:55:08 -08:00
Dmitry Torokhov 449aa83e69 Input: tsc2005 - add OF device table
To be prepared for SPI module loading using full compatible strings from
device tree, let's add OF module device table data.

Reviewed-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-12 14:55:08 -08:00
Jelle van der Waa 83f66a6f08 Input: add driver for Zeitec ZET6223
This is a basic driver for the Zeitec ZET6223 I2C touchscreen
controllers. The driver does not support firmware loading, which is not
required for all tablets which contain this chip.

Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-09 13:54:51 -08:00
Raphael Assenat 45536d373a Input: joydev - do not report stale values on first open
Postpone axis initialization to the first open instead of doing it
in joydev_connect. This is to make sure the generated startup events
are representative of the current joystick state rather than what
it was when joydev_connect() was called, potentially much earlier.
Once the first user is connected to joydev node we'll be updating
joydev->abs[] values and subsequent clients will be getting correct
initial states as well.

This solves issues with joystick driven menus that start scrolling
up each time they are started, until the user moves the joystick to
generate events. In emulator menu setups where the menu program is
restarted every time the game exits, the repeated need to move the
joystick to stop the unintended scrolling gets old rather quickly...

Signed-off-by: Raphael Assenat <raph@raphnet.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-09 13:29:04 -08:00
Benjamin Tissoires 81dec809aa Input: synaptics-rmi4 - forward upper mechanical buttons to PS/2 guest
On the latest series of ThinkPads, the button events for the TrackPoint
are reported through the touchpad itself as opposed to the TrackPoint
device. In order to report these buttons properly, we need to forward
them to the TrackPoint device and notify psmouse to send the button
presses/releases.

Signed-off-by: Lyude Paul <thatslyude@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-09 13:01:34 -08:00
Dmitry Torokhov bf3e8502ee Input: synaptics-rmi4 - clean up F30 implementation
This patch does several cleanup changes to F30 code

- switch to using BIT() macro
- use DIV_ROUND_UP() where appropriate
- factor out code setting up and reporting buttons
- use single loop when reporting buttons: arithmetic is cheap compared to
  conditionals and associated branch misprediction.

Tested-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-09 13:01:33 -08:00
Dmitry Torokhov bf23cfc343 Input: synaptics - use SERIO_OOB_DATA to handle trackstick buttons
Instead of using custom method of "passing" extended buttons from the
touchpad to trackstick, let's switch to the newly introduced SERIO_OOB_DATA
channel.

Tested-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-09 13:01:32 -08:00
Benjamin Tissoires 19ba1eb15a Input: psmouse - add a custom serio protocol to send extra information
The tracksticks on the Lenovo thinkpads have their buttons connected
through the touchpad device. We already fixed that in synaptics.c, but
when we switch the device into RMI4 mode to have proper support, the
pass-through functionality can't deal with them easily.

We add a new PS/2 flag and protocol designed for psmouse.  The RMI4 F03
pass-through can then emit a special set of commands to notify psmouse the
state of the buttons.

This patch implements the protocol in psmouse, while an other will
do the same for rmi4-f03.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-09 11:43:15 -08:00
Douglas Anderson cdd7950e7a input: cros_ec_keyb: Add non-matrix buttons and switches
On some newer boards using mkbp we're hooking up non-matrix buttons and
switches to the EC but NOT to the main application processor.

Let's add kernel support to handle this.  Rather than creating a whole
new input driver, we'll continue to use cros_ec_keyb and just report the
new keys.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-02-08 11:36:23 +00:00
Arnd Bergmann 413d373267 Input: synaptics-rmi4 - select 'SERIO' when needed
With CONFIG_SERIO=m, we get a build error for the rmi4-f03 driver,
added in linux-4.10:

warning: (HID_RMI) selects RMI4_F03 which has unmet direct dependencies (!UML && INPUT && RMI4_CORE && (SERIO=y || RMI4_CORE=SERIO))
drivers/input/built-in.o: In function `rmi_f03_attention':
rmi_f03.c:(.text+0xcfe0): undefined reference to `serio_interrupt'
rmi_f03.c:(.text+0xd055): undefined reference to `serio_interrupt'
drivers/input/built-in.o: In function `rmi_f03_remove':
rmi_f03.c:(.text+0xd115): undefined reference to `serio_unregister_port'
drivers/input/built-in.o: In function `rmi_f03_probe':
rmi_f03.c:(.text+0xd209): undefined reference to `__serio_register_port'

An earlier patch tried to fix this, but missed the HID_RMI driver that
does a 'select' on the F03 backend.

This adds a hidden Kconfig symbol that enforces 'serio' to be enabled
when RMI4-F03 is, which covers all cases.

Fixes: d7ddad0acc ("Input: synaptics-rmi4 - fix F03 build error when serio is module")
Fixes: c5e8848fc9 ("Input: synaptics-rmi4 - add support for F03")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-07 14:31:45 -08:00
Wei Yongjun e78395334b Input: synaptics-rmi4 - fix error return code in rmi_probe_interrupts()
Fix to return error code -ENOMEM from the devm_kzalloc() error handling
case instead of 0, as done elsewhere in this function.

Fixes: 6bd0dcfacf ("Input: synaptics-rmi4 - factor out functions
from probe")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-07 14:23:43 -08:00
Cameron Gutman a1fbf5bbef Input: xpad - restore LED state after device resume
Set the LED_CORE_SUSPENDRESUME flag on our LED device so the
LED state will be automatically restored by LED core on resume.

Since Xbox One pads stop flashing only when reinitialized, we'll
send them the initialization packet so they calm down too.

Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-06 19:32:49 -08:00
Dmitry Torokhov d5e6e0fa44 Merge branch 'synaptics-rmi4' into next
Bring in latest RMI4 support in preparation to the merge window.
2017-02-06 14:17:39 -08:00
Benjamin Tissoires f32361b71a Input: synaptics-rmi4 - add rmi_find_function()
If a function needs to communicate with an other, it's better to have
a way to retrieve this other.

Reviewed-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-06 14:15:42 -08:00
Cameron Gutman 57b8443d3e Input: xpad - fix stuck mode button on Xbox One S pad
The Xbox One S requires an ack to its mode button report, otherwise it
continuously retransmits the report. This makes the mode button appear to
be stuck down after it is pressed for the first time.

Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-06 14:15:15 -08:00
Boris Brezillon 4b0947974e gpio: Rename devm_get_gpiod_from_child()
Rename devm_get_gpiod_from_child() into
devm_fwnode_get_gpiod_from_child() to reflect the fact that this
function is operating on a fwnode object.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-04 21:27:26 +01:00
Dmitry Torokhov 5ec69524d4 Input: joydev - use clamp() macro
We have a nice macro ensuring that the value is within certain range, let's
use it instead of open-coding.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-01 10:39:40 -08:00
Dmitry Torokhov 6ecfe51b40 Input: refuse to register absolute devices without absinfo
If device is supposed to send absolute events (i.e. EV_ABS bit is set in
dev->evbit) but dev->absinfo is not allocated, then the driver has done
something wrong, and we should not register such device. Otherwise we'll
crash later, when driver tries to send absolute event.

Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-01 10:33:21 -08:00
Dmitry Torokhov 601bbbe051 Input: uinput - fix crash when mixing old and new init style
If user tries to initialize uinput device mixing old and new style
initialization (i.e. using old UI_SET_ABSBIT instead of UI_ABS_SETUP,
we forget to allocate input->absinfo and will crash when trying to send
absolute events:

        ioctl(ui, UI_DEV_SETUP, &us);
        ioctl(ui, UI_SET_PHYS, "Test");

        ioctl(ui, UI_SET_EVBIT, EV_ABS);
        ioctl(ui, UI_SET_ABSBIT, ABS_X);
        ioctl(ui, UI_SET_ABSBIT, ABS_Y);
        ioctl(ui, UI_DEV_CREATE, 0);

Reported-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=191811
Fixes: fbae10db09 ("Input: uinput - rework ABS validation")
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-01 10:33:11 -08:00
Nick Dyer ce363f0dec Input: synaptics-rmi4 - add sysfs interfaces for hardware IDs
These attributes provide various bits of information which may be enumerated
under the RMI4 protocol to user space.

This may be useful for displaying the particular version which is in use, or
selecting the correct firmware to flash.

Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31 15:51:22 -08:00
Nick Dyer 5a89916df2 Input: synaptics-rmi4 - add sysfs attribute update_fw_status
The attribute returns the percentage complete. If the firmware update fails, it
reports a negative error code.

Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31 15:51:21 -08:00
Dmitry Torokhov 73d8ef7600 Input: mousedev - stop offering PS/2 to userspace by default
Evdev interface has been available for many years and by now everyone
is switched to using it, so let's stop offering /dev/input/mouseN
and /dev/psaux by default.

Acked-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31 11:31:49 -08:00
Dmitry Torokhov 8b1a315b35 Input: tca8418 - switch to using generic device properties
Let's drop legacy platform data support (there are no users in mainline)
and switch to using generic device properties, which will make the driver
simpler (non-OF boards can use property sets to describe hardware).

Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31 11:31:49 -08:00
Dmitry Torokhov aef01aad89 Input: matrix-keypad - switch to using generic device properties
Instead of being OF-specific, let's switch to using generic device
properties, which will make this code usable on ACPI, device tree and
legacy boards that use property sets.

As part of the change let's rename matrix_keypad_parse_of_params() to
matrix_keypad_parse_properties().

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31 11:31:48 -08:00
Christophe JAILLET 05e0be7c90 Input: synaptics-rmi4 - fix reversed conditions in enable/disable_irq_wake
These tests are reversed.  A warning should be displayed if an error is
returned, not on success.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31 00:51:06 -08:00
Linus Walleij b1fe0cf06f Input: delete MPU3050 driver
The MPU3050 driver in the input subsystem has been superseded by a proper
IIO driver found in drivers/iio/gyro/mpu3050*.

Patches have been submitted to remove all defconfig and related references
to the old driver and replace this input driver with the IIO driver.

So delete the input driver. Input was never a good fit for sensors anyway.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31 00:18:07 -08:00
Alexander Stein b2987d7438 gpio: Pass GPIO label down to gpiod_request
Currently all users of fwnode_get_named_gpiod() have no way to
specify a label for the GPIO. So GPIOs listed in debugfs are shown
with label "?". With this change a proper label is used.

Also adjust all users so they can pass a label, properly retrieved
from device tree properties.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26 09:59:52 +01:00
Andy Shevchenko a264d10ff4 gpiolib: Convert fwnode_get_named_gpiod() to configure GPIO
Make fwnode_get_named_gpiod() consistent with the rest of
gpiod_get() like API, i.e. configure GPIO pin immediately after
request.

Besides obvious clean up it will help to configure pins based
on firmware provided resources.

Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26 09:59:32 +01:00
Bhumika Goyal f719315b52 Input: constify device_type structures
Declare device_type structures as const as they are only stored in the
type field of a device structure. This field is of type const, so add
const to declaration of device_type structures.

File size before:
   text	   data	    bss	    dec	    hex	filename
  17184	   1344	     80	  18608	   48b0	drivers/input/input.o

File size after:
   text	   data	    bss	    dec	    hex	filename
  17248	   1280	     80	  18608	   48b0	drivers/input/input.o

File size before:
   text	   data	    bss	    dec	    hex	filename
   2355	    384	      8	   2747	    abb	drivers/input/rmi4/rmi_bus.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   2483	    264	      8	   2755	    ac3	drivers/input/rmi4/rmi_bus.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-24 12:38:49 -08:00
Dmitry Torokhov 0cce284537 Linux 4.10-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYhRv9AAoJEHm+PkMAQRiG/uAH+wYT9qwvT460pUC6F1X5PNdN
 H5KvaGsRNP1SjjQid5CrAFFDs52pFKf9GoV0Rn2WRoHAmEF1Dps4y/bMtR1GlsRB
 IfOU+bnmH1Mmj4RCXUoFgFgYJVXC0WOz9SM5aCOAAZLCRF9BdkTpRo8lijuh141k
 7YMqpaRhr/rJvQRZMEX+Q8HhfyNHz53olrykYp+O4x5F/CUihFzH76pY28j0YihS
 wd/DdxrWyFn35DcFGfDb3yK7J2a6pGtnFw3RP4gU8DsH/Ks0133cR/2lOAtGDECN
 dAGbLHoTvj3L4Twz5aiH6WRkXUkfDLK9UhxD/82UgLLmP5XvG1RdKZUNQ60CL5g=
 =2TBu
 -----END PGP SIGNATURE-----

Merge tag 'v4.10-rc5' into next

Sync up with mainline to bring up improvements in various subsystems.
2017-01-24 12:37:43 -08:00
Manuel Lauss 3f5c34c6d4 Input: wm97xx - make missing platform data non-fatal
Commit 6480af4915 ("power_supply: wm97xx_battery: use
power_supply_get_drvdata") made wm97xx platform data mandatory, although
it's still optional.

This patch fixes an oops during driver probe on one of my MIPS boards with
a wm9712.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-24 10:27:34 -08:00
Guenter Roeck cefb26d4b3 Input: touchscreen - drop unnecessary calls to input_set_drvdata
Since there is no call to dev_get_drvdata() or input_get_drvdata(),
the call to input_set_drvdata() is unnecessary and can be dropped.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22 17:22:31 -08:00
Guenter Roeck 86178c8634 Input: dm355evm_keys - drop unnecessary call to input_set_drvdata
Since there is no call to dev_get_drvdata() or input_get_drvdata(),
the call to input_set_drvdata() is unnecessary and can be dropped.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22 17:22:29 -08:00
Guenter Roeck 555c765b0c Input: mouse - drop unnecessary calls to input_set_drvdata
Since there is no call to dev_get_drvdata() or input_get_drvdata(),
the call to input_set_drvdata() is unnecessary and can be dropped.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22 17:22:28 -08:00
Guenter Roeck 0ff44b0fd3 Input: maplecontrol - drop unnecessary call to input_set_drvdata
Since there is no call to dev_get_drvdata() or input_get_drvdata(),
the call to input_set_drvdata() is unnecessary and can be dropped.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22 17:22:27 -08:00
Guenter Roeck 14fdb924af Input: keyboard - drop unnecessary calls to input_set_drvdata
If there is no call to dev_get_drvdata() or input_get_drvdata(),
the call to input_set_drvdata() is unnecessary and can be dropped.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22 17:22:25 -08:00
Marcos Paulo de Souza 2ea9c2362b Input: i8042 - add dbg msg when a command can't write its parameter
This can happen in cases like bug #102951[1], so add a proper debug msg
as done in wait_read. Also, change wait_read debug message to differ from
wait_write.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=102951

Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22 14:32:35 -08:00
Dmitry Torokhov a5e5da2b6f Input: max11801_ts - drop call to input_set_drvdata()
Nobody calls input_get_drvdata() so setting it is not required.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22 14:32:34 -08:00
Dmitry Torokhov 2de8b4110c Input: pwm-beeper - switch to using "atomic" PWM API
The "atomic" API allows us to configure PWM period and duty cycle and
enable it in one call.

Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Tested-by: David Lechner <david@lechnology.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22 00:26:36 -08:00
David Lechner 9e54924432 Input: pwm-beeper - add optional amplifier regulator
This adds an optional regulator to the pwm-beeper device. This regulator
acts as an amplifier. The amplifier is only enabled while beeping in order
to reduce power consumption.

Tested on LEGO MINDSTORMS EV3, which has a speaker connected to PWM through
an amplifier.

Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22 00:23:22 -08:00
David Lechner 6248188140 Input: pwm-beeper - suppress error message on probe defer
This suppress printing an error message when pwm_get returns -EPROBE_DEFER.
Otherwise you get a bunch of noise in the kernel log.

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22 00:23:20 -08:00