On-Demand-Paging MRs are registered using ib_reg_user_mr and
unregistered with ib_dereg_mr.
Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Currently, RDS calls ib_dma_alloc_coherent() to allocate a large piece
of contiguous DMA coherent memory to store struct rds_header for
sending/receiving packets. The memory allocated is then partitioned
into struct rds_header. This is not necessary and can be costly at
times when memory is fragmented. Instead, RDS should use the DMA
memory pool interface to handle this. The DMA addresses of the pre-
allocated headers are stored in an array. At send/receive ring
initialization and refill time, this arrary is de-referenced to get
the DMA addresses. This array is not accessed at send/receive packet
processing.
Suggested-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Log vendor error if work requests fail. Vendor error provides
more information that is used for debugging the issue.
Signed-off-by: Sudhakar Dindukurti <sudhakar.dindukurti@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RDS composite message(rdma + control) user notification needs to be
triggered once the full message is delivered and such a fix was
added as part of commit 941f8d55f6 ("RDS: RDMA: Fix the composite
message user notification"). But rds_send_remove_from_sock is missing
data part notify check and hence at times the user don't get
notification which isn't desirable.
One way is to fix the rds_send_remove_from_sock to check of that case
but considering the ordering complexity with completion handler and
rdma + control messages are always dispatched back to back in same send
context, just delaying the signaled completion on rmda work request also
gets the desired behaviour. i.e Notifying application only after
RDMA + control message send completes. So patch updates the earlier
fix with this approach. The delay signaling completions of rdma op
till the control message send completes fix was done by Venkat
Venkatsubra in downstream kernel.
Reviewed-and-tested-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
This has been a slightly more active cycle than normal with ongoing core
changes and quite a lot of collected driver updates.
- Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe
- A new data transfer mode for HFI1 giving higher performance
- Significant functional and bug fix update to the mlx5 On-Demand-Paging MR
feature
- A chip hang reset recovery system for hns
- Change mm->pinned_vm to an atomic64
- Update bnxt_re to support a new 57500 chip
- A sane netlink 'rdma link add' method for creating rxe devices and fixing
the various unregistration race conditions in rxe's unregister flow
- Allow lookup up objects by an ID over netlink
- Various reworking of the core to driver interface:
* Drivers should not assume umem SGLs are in PAGE_SIZE chunks
* ucontext is accessed via udata not other means
* Start to make the core code responsible for object memory
allocation
* Drivers should convert struct device to struct ib_device
via a helper
* Drivers have more tools to avoid use after unregister problems
-----BEGIN PGP SIGNATURE-----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=p12E
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a slightly more active cycle than normal with ongoing
core changes and quite a lot of collected driver updates.
- Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe
- A new data transfer mode for HFI1 giving higher performance
- Significant functional and bug fix update to the mlx5
On-Demand-Paging MR feature
- A chip hang reset recovery system for hns
- Change mm->pinned_vm to an atomic64
- Update bnxt_re to support a new 57500 chip
- A sane netlink 'rdma link add' method for creating rxe devices and
fixing the various unregistration race conditions in rxe's
unregister flow
- Allow lookup up objects by an ID over netlink
- Various reworking of the core to driver interface:
- drivers should not assume umem SGLs are in PAGE_SIZE chunks
- ucontext is accessed via udata not other means
- start to make the core code responsible for object memory
allocation
- drivers should convert struct device to struct ib_device via a
helper
- drivers have more tools to avoid use after unregister problems"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits)
net/mlx5: ODP support for XRC transport is not enabled by default in FW
IB/hfi1: Close race condition on user context disable and close
RDMA/umem: Revert broken 'off by one' fix
RDMA/umem: minor bug fix in error handling path
RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
cxgb4: kfree mhp after the debug print
IB/rdmavt: Fix concurrency panics in QP post_send and modify to error
IB/rdmavt: Fix loopback send with invalidate ordering
IB/iser: Fix dma_nents type definition
IB/mlx5: Set correct write permissions for implicit ODP MR
bnxt_re: Clean cq for kernel consumers only
RDMA/uverbs: Don't do double free of allocated PD
RDMA: Handle ucontext allocations by IB/core
RDMA/core: Fix a WARN() message
bnxt_re: fix the regression due to changes in alloc_pbl
IB/mlx4: Increase the timeout for CM cache
IB/core: Abort page fault handler silently during owning process exit
IB/mlx5: Validate correct PD before prefetch MR
IB/mlx5: Protect against prefetch of invalid MR
RDMA/uverbs: Store PR pointer before it is overwritten
...
For RDMA transports, RDS TOS is an extension of IB QoS(Annex A13)
to provide clients the ability to segregate traffic flows for
different type of data. RDMA CM abstract it for ULPs using
rdma_set_service_type(). Internally, each traffic flow is
represented by a connection with all of its independent resources
like that of a normal connection, and is differentiated by
service type. In other words, there can be multiple qp connections
between an IP pair and each supports a unique service type.
The feature has been added from RDSv4.1 onwards and supports
rolling upgrades. RDMA connection metadata also carries the tos
information to set up SL on end to end context. The original
code was developed by Bang Nguyen in downstream kernel back in
2.6.32 kernel days and it has evolved over period of time.
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
[yanjun.zhu@oracle.com: Adapted original patch with ipv6 changes]
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxXYaEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGkSQH/2yrfnviNPFYpZOR
QQdc71Bfhkd8m85SmWIsSebkxmi3hKFVj15sGbWXd6+0/VxjEEGvQCZpvVwJceke
LwDxtkKGg/74wAqJvlSAWxFNZ+Had4jDeoSoeQChddsBVXBBCxQx2v6ECg3o2x7W
k8Z8t4+3RijDf8fYXY9ETyO2zW8R/wgT+dnl+DPgUH7u4dxh7FzAUfc4bgZIDg+i
FzBQfbTJuz4BU7uRZ9IJiwhWKv0Iyi2DR3BY8Z1pqEpRaUMJMrCs2WGytHbTgt9e
0EtO1airbVneU4eumU/ZaF9cyEbah9HousEPnP7J09WG4s/Odxc4zE+uK1QqS2im
5Xv88is=
=dVd1
-----END PGP SIGNATURE-----
Merge tag 'v5.0-rc5' into rdma.git for-next
Linux 5.0-rc5
Needed to merge the include/uapi changes so we have an up to date
single-tree for these files. Patches already posted are also expected to
need this for dependencies.
Keeping single line wrapper functions is not useful. Hence remove the
ib_sg_dma_address() and ib_sg_dma_len() functions. This patch does not
change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rdma.git merge resolution for the 4.19 merge window
Conflicts:
drivers/infiniband/core/rdma_core.c
- Use the rdma code and revise with the new spelling for
atomic_fetch_add_unless
drivers/nvme/host/rdma.c
- Replace max_sge with max_send_sge in new blk code
drivers/nvme/target/rdma.c
- Use the blk code and revise to use NULL for ib_post_recv when
appropriate
- Replace max_sge with max_recv_sge in new blk code
net/rds/ib_send.c
- Use the net code and revise to use NULL for ib_post_recv when
appropriate
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Variable 'rds_ibdev' is being assigned but never used,
so can be removed.
fix this clang warning:
net/rds/ib_send.c:762:24: warning: variable ‘rds_ibdev’ set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.
To make this possible, only one cast had to be introduce that casts away
constness, namely in rpcrdma_post_recvs(). The only way I can think of to
avoid that cast is to introduce an additional loop in that function or to
change the data type of bad_wr from struct ib_recv_wr ** into int
(an index that refers to an element in the work request list). However,
both approaches would require even more extensive changes than this
patch.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch changes the internal representation of an IP address to use
struct in6_addr. IPv4 address is stored as an IPv4 mapped address.
All the functions which take an IP address as argument are also
changed to use struct in6_addr. But RDS socket layer is not modified
such that it still does not accept IPv6 address from an application.
And RDS layer does not accept nor initiate IPv6 connections.
v2: Fixed sparse warnings.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The number of unsignaled work-requests posted to the IB send queue is
tracked by a counter in the rds_ib_connection struct. When it reaches
zero, or the caller explicitly asks for it, the send-signaled bit is
set in send_flags and the counter is reset. This is performed by the
rds_ib_set_wr_signal_state() function.
However, this function is not always used which yields inaccurate
accounting. This commit fixes this, re-factors a code bloat related to
the matter, and makes the actual parameter type to the function
consistent.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
send_flags needs to be initialized before calling
rds_ib_set_wr_signal_state().
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the function rds_ib_xmit_atomic, ib_ring is not allocated
successfully. As such, it is not necessary to unalloc it.
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When application sends an RDS RDMA composite message consist of
RDMA transfer to be followed up by non RDMA payload, it expect to
be notified *only* when the full message gets delivered. RDS RDMA
notification doesn't behave this way though.
Thanks to Venkat for debug and root casuing the issue
where only first part of the message(RDMA) was
successfully delivered but remainder payload delivery failed.
In that case, application should not be notified with
a false positive of message delivery success.
Fix this case by making sure the user gets notified only after
the full message delivery.
Reviewed-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Refactor code to avoid separate indirections for single-path
and multipath transports. All transports (both single and mp-capable)
will get a pointer to the rds_conn_path, and can trivially derive
the rds_connection from the ->cp_conn.
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for multipath RDS, split the rds_connection
structure into a base structure, and a per-path struct rds_conn_path.
The base structure tracks information and locks common to all
paths. The workqs for send/recv/shutdown etc are tracked per
rds_conn_path. Thus the workq callbacks now work with rds_conn_path.
This commit allows for one rds_conn_path per rds_connection, and will
be extended into multiple conn_paths in subsequent commits.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This helps to combine asynchronous fastreg MR completion handler
with send completion handler.
No functional change.
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- "Checksum offload support in user space" enablement
- Misc cxgb4 fixes, add T6 support
- Misc usnic fixes
- 32 bit build warning fixes
- Misc ocrdma fixes
- Multicast loopback prevention extension
- Extend the GID cache to store and return attributes of GIDs
- Misc iSER updates
- iSER clustering update
- Network NameSpace support for rdma CM
- Work Request cleanup series
- New Memory Registration API
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bBIY
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"This is my initial round of 4.4 merge window patches. There are a few
other things I wish to get in for 4.4 that aren't in this pull, as
this represents what has gone through merge/build/run testing and not
what is the last few items for which testing is not yet complete.
- "Checksum offload support in user space" enablement
- Misc cxgb4 fixes, add T6 support
- Misc usnic fixes
- 32 bit build warning fixes
- Misc ocrdma fixes
- Multicast loopback prevention extension
- Extend the GID cache to store and return attributes of GIDs
- Misc iSER updates
- iSER clustering update
- Network NameSpace support for rdma CM
- Work Request cleanup series
- New Memory Registration API"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (76 commits)
IB/core, cma: Make __attribute_const__ declarations sparse-friendly
IB/core: Remove old fast registration API
IB/ipath: Remove fast registration from the code
IB/hfi1: Remove fast registration from the code
RDMA/nes: Remove old FRWR API
IB/qib: Remove old FRWR API
iw_cxgb4: Remove old FRWR API
RDMA/cxgb3: Remove old FRWR API
RDMA/ocrdma: Remove old FRWR API
IB/mlx4: Remove old FRWR API support
IB/mlx5: Remove old FRWR API support
IB/srp: Dont allocate a page vector when using fast_reg
IB/srp: Remove srp_finish_mapping
IB/srp: Convert to new registration API
IB/srp: Split srp_map_sg
RDS/IW: Convert to new memory registration API
svcrdma: Port to new memory registration API
xprtrdma: Port to new memory registration API
iser-target: Port to new memory registration API
IB/iser: Port to new fast registration API
...
This patch split up struct ib_send_wr so that all non-trivial verbs
use their own structure which embedds struct ib_send_wr. This dramaticly
shrinks the size of a WR for most common operations:
sizeof(struct ib_send_wr) (old): 96
sizeof(struct ib_send_wr): 48
sizeof(struct ib_rdma_wr): 64
sizeof(struct ib_atomic_wr): 96
sizeof(struct ib_ud_wr): 88
sizeof(struct ib_fast_reg_wr): 88
sizeof(struct ib_bind_mw_wr): 96
sizeof(struct ib_sig_handover_wr): 80
And with Sagi's pending MR rework the fast registration WR will also be
down to a reasonable size:
sizeof(struct ib_fastreg_wr): 64
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> [srp, srpt]
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> [sunrpc]
Tested-by: Haggai Eran <haggaie@mellanox.com>
Tested-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Similar to what we did with receive CQ completion handling, we split
the transmit completion handler so that it lets us implement batched
work completion handling.
We re-use the cq_poll routine and makes use of RDS_IB_SEND_OP to
identify the send vs receive completion event handler invocation.
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
- Create drivers/staging/rdma
- Move amso1100 driver to staging/rdma and schedule for deletion
- Move ipath driver to staging/rdma and schedule for deletion
- Add hfi1 driver to staging/rdma and set TODO for move to regular tree
- Initial support for namespaces to be used on RDMA devices
- Add RoCE GID table handling to the RDMA core caching code
- Infrastructure to support handling of devices with differing
read and write scatter gather capabilities
- Various iSER updates
- Kill off unsafe usage of global mr registrations
- Update SRP driver
- Misc. mlx4 driver updates
- Support for the mr_alloc verb
- Support for a netlink interface between kernel and user space cache
daemon to speed path record queries and route resolution
- Ininitial support for safe hot removal of verbs devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=EHLg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull inifiniband/rdma updates from Doug Ledford:
"This is a fairly sizeable set of changes. I've put them through a
decent amount of testing prior to sending the pull request due to
that.
There are still a few fixups that I know are coming, but I wanted to
go ahead and get the big, sizable chunk into your hands sooner rather
than waiting for those last few fixups.
Of note is the fact that this creates what is intended to be a
temporary area in the drivers/staging tree specifically for some
cleanups and additions that are coming for the RDMA stack. We
deprecated two drivers (ipath and amso1100) and are waiting to hear
back if we can deprecate another one (ehca). We also put Intel's new
hfi1 driver into this area because it needs to be refactored and a
transfer library created out of the factored out code, and then it and
the qib driver and the soft-roce driver should all be modified to use
that library.
I expect drivers/staging/rdma to be around for three or four kernel
releases and then to go away as all of the work is completed and final
deletions of deprecated drivers are done.
Summary of changes for 4.3:
- Create drivers/staging/rdma
- Move amso1100 driver to staging/rdma and schedule for deletion
- Move ipath driver to staging/rdma and schedule for deletion
- Add hfi1 driver to staging/rdma and set TODO for move to regular
tree
- Initial support for namespaces to be used on RDMA devices
- Add RoCE GID table handling to the RDMA core caching code
- Infrastructure to support handling of devices with differing read
and write scatter gather capabilities
- Various iSER updates
- Kill off unsafe usage of global mr registrations
- Update SRP driver
- Misc mlx4 driver updates
- Support for the mr_alloc verb
- Support for a netlink interface between kernel and user space cache
daemon to speed path record queries and route resolution
- Ininitial support for safe hot removal of verbs devices"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits)
IB/ipoib: Suppress warning for send only join failures
IB/ipoib: Clean up send-only multicast joins
IB/srp: Fix possible protection fault
IB/core: Move SM class defines from ib_mad.h to ib_smi.h
IB/core: Remove unnecessary defines from ib_mad.h
IB/hfi1: Add PSM2 user space header to header_install
IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY
mlx5: Fix incorrect wc pkey_index assignment for GSI messages
IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow
IB/uverbs: reject invalid or unknown opcodes
IB/cxgb4: Fix if statement in pick_local_ip6adddrs
IB/sa: Fix rdma netlink message flags
IB/ucma: HW Device hot-removal support
IB/mlx4_ib: Disassociate support
IB/uverbs: Enable device removal when there are active user space applications
IB/uverbs: Explicitly pass ib_dev to uverbs commands
IB/uverbs: Fix race between ib_uverbs_open and remove_one
IB/uverbs: Fix reference counting usage of event files
IB/core: Make ib_dealloc_pd return void
IB/srp: Create an insecure all physical rkey only if needed
...
The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
WR(Work Requests )always generate a WC(Work Completion) with
signaled send. Default RDS ib code is setup for un-signaled
completion. Since RDS connction is persistent, we can end up
sending the data even after large-send when the remote end is
not active(for any reason).
By doing a signaled send at least once per large-send,
we can at least detect the problem in work completion
handler there by avoiding sending more data to
inactive remote.
Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BUG_ON at line 452/453 is triggered in function rds_send_xmit.
441 while (ret) {
442 tmp = min_t(int, ret, sg->length -
443 conn->c_xmit_data_off);
444 conn->c_xmit_data_off += tmp;
445 ret -= tmp;
446 if (conn->c_xmit_data_off == sg->length) {
447 conn->c_xmit_data_off = 0;
448 sg++;
449 conn->c_xmit_sg++;
450 if (ret != 0 && conn->c_xmit_sg == rm->data.op_nents)
451 printk(KERN_ERR "conn %p rm %p sg %p ret %d\n", conn, rm, sg, ret);
452 BUG_ON(ret != 0 &&
453 conn->c_xmit_sg == rm->data.op_nents);
454 }
455 }
it is complaining the total sent length is bigger that we want to send.
rds_ib_xmit() is wrong for the second entry for the same rds_message returning
wrong value.
the sg and off passed by rds_send_xmit to rds_ib_xmit is based on
scatterlist.offset/length, but the rds_ib_xmit action is based on
scatterlist.dma_address/dma_length. in case dma_length is larger than length
there is problem. for the 2nd and later entries of rds_ib_xmit for same
rds_message, at least one of the following two is wrong:
1) the scatterlist to start with, the choosen one can far beyond the correct
one.
2) the offset to start with within the scatterlist.
fix:
add op_dmasg and op_dmaoff to rm_data_op structure indicating the scatterlist
and offset within the it to start with for rds_ib_xmit respectively. op_dmasg
and op_dmaoff are initialized to zero when doing dma mapping for the first see
of the message and are changed when filling send slots.
the same applies to rds_iw_xmit too.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The macro rdsdebug is defined as
pr_debug("%s(): " fmt, __func__ , ##args)
Hence it doesn't make sense to include the name of the calling
function explicitly in the format string passed to rdsdebug.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
To be future-proof and for better readability the time comparisons are modified
to use time_after() instead of raw math.
Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
After congestion update on a local connection, when rds_ib_xmit returns
less bytes than that are there in the message, rds_send_xmit calls
back rds_ib_xmit with an offset that causes BUG_ON(off & RDS_FRAG_SIZE)
to trigger.
For a 4Kb PAGE_SIZE rds_ib_xmit returns min(8240,4096)=4096 when actually
the message contains 8240 bytes. rds_send_xmit thinks there is more to send
and calls rds_ib_xmit again with a data offset "off" of 4096-48(rds header)
=4048 bytes thus hitting the BUG_ON(off & RDS_FRAG_SIZE) [RDS_FRAG_SIZE=4k].
The commit 6094628bfd
"rds: prevent BUG_ON triggering on congestion map updates" introduced
this regression. That change was addressing the triggering of a different
BUG_ON in rds_send_xmit() on PowerPC architecture with 64Kbytes PAGE_SIZE:
BUG_ON(ret != 0 &&
conn->c_xmit_sg == rm->data.op_nents);
This was the sequence it was going through:
(rds_ib_xmit)
/* Do not send cong updates to IB loopback */
if (conn->c_loopback
&& rm->m_inc.i_hdr.h_flags & RDS_FLAG_CONG_BITMAP) {
rds_cong_map_updated(conn->c_fcong, ~(u64) 0);
return sizeof(struct rds_header) + RDS_CONG_MAP_BYTES;
}
rds_ib_xmit returns 8240
rds_send_xmit:
c_xmit_data_off = 0 + 8240 - 48 (rds header accounted only the first time)
= 8192
c_xmit_data_off < 65536 (sg->length), so calls rds_ib_xmit again
rds_ib_xmit returns 8240
rds_send_xmit:
c_xmit_data_off = 8192 + 8240 = 16432, calls rds_ib_xmit again
and so on (c_xmit_data_off 24672,32912,41152,49392,57632)
rds_ib_xmit returns 8240
On this iteration this sequence causes the BUG_ON in rds_send_xmit:
while (ret) {
tmp = min_t(int, ret, sg->length - conn->c_xmit_data_off);
[tmp = 65536 - 57632 = 7904]
conn->c_xmit_data_off += tmp;
[c_xmit_data_off = 57632 + 7904 = 65536]
ret -= tmp;
[ret = 8240 - 7904 = 336]
if (conn->c_xmit_data_off == sg->length) {
conn->c_xmit_data_off = 0;
sg++;
conn->c_xmit_sg++;
BUG_ON(ret != 0 &&
conn->c_xmit_sg == rm->data.op_nents);
[c_xmit_sg = 1, rm->data.op_nents = 1]
What the current fix does:
Since the congestion update over loopback is not actually transmitted
as a message, all that rds_ib_xmit needs to do is let the caller think
the full message has been transmitted and not return partial bytes.
It will return 8240 (RDS_CONG_MAP_BYTES+48) when PAGE_SIZE is 4Kb.
And 64Kb+48 when page size is 64Kb.
Reported-by: Josh Hunt <joshhunt00@gmail.com>
Tested-by: Honggang Li <honli@redhat.com>
Acked-by: Bang Nguyen <bang.nguyen@oracle.com>
Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited()
Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>
Add two CMSGs for masked versions of cswp and fadd. args
struct modified to use a union for different atomic op type's
arguments. Change IB to do masked atomic ops. Atomic op type
in rds_message similarly unionized.
Signed-off-by: Andy Grover <andy.grover@oracle.com>
This prints the constant identifier for work completion status and rdma
cm event types, like we already do for IB event types.
A core string array helper is added that each string type uses.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
We're seeing bugs today where IB connection shutdown clears the send
ring while the tasklet is processing completed sends. Implementation
details cause this to dereference a null pointer. Shutdown needs to
wait for send completion to stop before tearing down the connection. We
can't simply wait for the ring to empty because it may contain
unsignaled sends that will never be processed.
This patch tracks the number of signaled sends that we've posted and
waits for them to complete. It also makes sure that the tasklet has
finished executing.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
rds_send_xmit() was changed to hold an interrupt masking spinlock instead of a
mutex so that it could be called from the IB receive tasklet path. This broke
the TCP transport because its xmit method can block and masks and unmasks
interrupts.
This patch serializes callers to rds_send_xmit() with a simple bit instead of
the current spinlock or previous mutex. This enables rds_send_xmit() to be
called from any context and to call functions which block. Getting rid of the
c_send_lock exposes the bare c_lock acquisitions which are changed to block
interrupts.
A waitqueue is added so that rds_conn_shutdown() can wait for callers to leave
rds_send_xmit() before tearing down partial send state. This lets us get rid
of c_senders.
rds_send_xmit() is changed to check the conn state after acquiring the
RDS_IN_XMIT bit to resolve races with the shutdown path. Previously both
worked with the conn state and then the lock in the same order, allowing them
to race and execute the paths concurrently.
rds_send_reset() isn't racing with rds_send_xmit() now that rds_conn_shutdown()
properly ensures that rds_send_xmit() can't start once the conn state has been
changed. We can remove its previous use of the spinlock.
Finally, c_send_generation is redundant. Callers can race to test the c_flags
bit by simply retrying instead of racing to test the c_send_generation atomic.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
rds_ib_xmit_rdma() was calling ib_get_client_data() to get at the rds_ibdevice
just to get the max_sge for the transmit. This patch instead has it get it
directly off the rds_ibdev which is stored on the connection.
The current code won't free the rds_ibdev until all the IB connections that use
it are freed. So it's safe to reference the rds_ibdev this way. In the future
it also makes it easier to support proper reference counting of the rds_ibdev
struct.
As an additional bonus, this gets rid of the performance hit of calling in to
the IB stack to look up the rds_ibdev. The current implementation in the IB
stack acquires an interrupt blocking spinlock to protect the registration of
client callback data.
Signed-off-by: Zach Brown <zach.brown@oracle.com>
This makes sure we have the proper number of references in
rds_ib_xmit_atomic and rds_ib_xmit_rdma. We also consistently
drop references the same way for all message types as the IOs end.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The RDS send_xmit code was trying to get fancy with message
counting and was dropping the final reference on the RDMA messages
too early. This resulted in memory corruption and oopsen.
The fix here is to always add a ref as the parts of the message passes
through rds_send_xmit, and always drop a ref as the parts of the message
go through completion handling.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Previously, RDS would wait until the final send WR had completed
and then handle cleanup. With silent ops, we do not know
if an atomic, rdma, or data op will be last. This patch
handles any of these cases by keeping a pointer to the last
op in the message in m_last_op.
When the TX completion event fires, rds dispatches to per-op-type
cleanup functions, and then does whole-message cleanup, if the
last op equalled m_last_op.
This patch also moves towards having op-specific functions take
the op struct, instead of the overall rm struct.
rds_ib_connection has a pointer to keep track of a a partially-
completed data send operation. This patch changes it from an
rds_message pointer to the narrower rm_data_op pointer, and
modifies places that use this pointer as needed.
Signed-off-by: Andy Grover <andy.grover@oracle.com>
A big changeset, but it's all pretty dumb.
struct rds_rdma_op was already embedded in struct rm_rdma_op.
Remove rds_rdma_op and put its members in rm_rdma_op. Rename
members with "op_" prefix instead of "r_", for consistency.
Of course this breaks a lot, so fixup the code accordingly.
Signed-off-by: Andy Grover <andy.grover@oracle.com>
Maybe things worked fine with the flow control code running
even in the non-flow-control case, but making it explicitly
conditional helps the non-fc case be easier to read.
Signed-off-by: Andy Grover <andy.grover@oracle.com>
Removed unsignaled_bytes sysctl and code to signal
based on it. I believe unsignaled_wrs is more than
sufficient for our purposes.
Signed-off-by: Andy Grover <andy.grover@oracle.com>
Hans Westgaard Ry
Ka-Cheong Poon
Sudhakar Dindukurti
Santosh Shilimkar
Linus Torvalds
Jason Gunthorpe
Bart Van Assche
Jacob Wen
YueHaibing
Bart Van Assche
Håkon Bugge
Zhu Yanjun
Sowmini Varadhan
Christoph Hellwig
Jason Gunthorpe
Doug Ledford
Wengang Wang
Sagi Grimberg
Rasmus Villemoes
Manuel Schölling
Venkat Venkatsubra
Manuel Zerpies
Lucas De Marchi
Neil Horman
Andy Grover
Zach Brown
Chris Mason