Граф коммитов

46716 Коммитов

Автор SHA1 Сообщение Дата
Ross Zwisler d086630e19 ext4: remove unused function ext4_aligned_io()
The last user of ext4_aligned_io() was the DAX path in
ext4_direct_IO_write().  This usage was removed by Jan Kara's patch
entitled "ext4: Rip out DAX handling from direct IO path".

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-21 11:51:44 -05:00
Jan Kara dd936e4313 dax: rip out get_block based IO support
No one uses functions using the get_block callback anymore. Rip them
out and update documentation.

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-20 20:48:36 -05:00
Jan Kara 00697eed38 ext2: use iomap_zero_range() for zeroing truncated page in DAX path
Currently the last user of ext2_get_blocks() for DAX inodes was
dax_truncate_page(). Convert that to iomap_zero_range() so that all DAX
IO uses the iomap path.

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-20 20:47:07 -05:00
Jan Kara 0bd2d5ec3d ext4: rip out DAX handling from direct IO path
Reads and writes for DAX inodes should no longer end up in direct IO
code. Rip out the support and add a warning.

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-20 18:53:30 -05:00
Jan Kara e2ae766c1b ext4: convert DAX faults to iomap infrastructure
Convert DAX faults to use iomap infrastructure. We would not have to start
transaction in ext4_dax_fault() anymore since ext4_iomap_begin takes
care of that but so far we do that to avoid lock inversion of
transaction start with DAX entry lock which gets acquired in
dax_iomap_fault() before calling ->iomap_begin handler.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-20 18:51:24 -05:00
Jan Kara 96f8ba3dd6 ext4: avoid split extents for DAX writes
Currently mapping of blocks for DAX writes happen with
EXT4_GET_BLOCKS_PRE_IO flag set. That has a result that each
ext4_map_blocks() call creates a separate written extent, although it
could be merged to the neighboring extents in the extent tree.  The
reason for using this flag is that in case the extent is unwritten, we
need to convert it to written one and zero it out. However this "convert
mapped range to written" operation is already implemented by
ext4_map_blocks() for the case of data writes into unwritten extent. So
just use flags for that mode of operation, simplify the code, and avoid
unnecessary split extents.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-20 18:10:09 -05:00
Jan Kara 776722e85d ext4: DAX iomap write support
Implement DAX writes using the new iomap infrastructure instead of
overloading the direct IO path.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-20 18:09:11 -05:00
Jan Kara 47e6935136 ext4: use iomap for zeroing blocks in DAX mode
Use iomap infrastructure for zeroing blocks when in DAX mode.
ext4_iomap_begin() handles read requests just fine and that's all that
is needed for iomap_zero_range().

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-20 18:08:05 -05:00
Jan Kara 364443cbcf ext4: convert DAX reads to iomap infrastructure
Implement basic iomap_begin function that handles reading and use it for
DAX reads.

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-20 17:36:06 -05:00
Jan Kara a3caa24b70 ext4: only set S_DAX if DAX is really supported
Currently we have S_DAX set inode->i_flags for a regular file whenever
ext4 is mounted with dax mount option. However in some cases we cannot
really do DAX - e.g. when inode is marked to use data journalling, when
inode data is being encrypted, or when inode is stored inline. Make sure
S_DAX flag is appropriately set/cleared in these cases.

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-20 17:32:59 -05:00
Jan Kara 213bcd9ccb ext4: factor out checks from ext4_file_write_iter()
Factor out checks of 'from' and whether we are overwriting out of
ext4_file_write_iter() so that the function is easier to follow.

Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-20 17:29:51 -05:00
Theodore Ts'o c48ae41baf ext4: add sanity checking to count_overhead()
The commit "ext4: sanity check the block and cluster size at mount
time" should prevent any problems, but in case the superblock is
modified while the file system is mounted, add an extra safety check
to make sure we won't overrun the allocated buffer.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2016-11-18 13:37:47 -05:00
Theodore Ts'o cd6bb35bf7 ext4: use more strict checks for inodes_per_block on mount
Centralize the checks for inodes_per_block and be more strict to make
sure the inodes_per_block_group can't end up being zero.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
2016-11-18 13:28:30 -05:00
Theodore Ts'o 5aee0f8a3f ext4: fix in-superblock mount options processing
Fix a large number of problems with how we handle mount options in the
superblock.  For one, if the string in the superblock is long enough
that it is not null terminated, we could run off the end of the string
and try to interpret superblocks fields as characters.  It's unlikely
this will cause a security problem, but it could result in an invalid
parse.  Also, parse_options is destructive to the string, so in some
cases if there is a comma-separated string, it would be modified in
the superblock.  (Fortunately it only happens on file systems with a
1k block size.)

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2016-11-18 13:24:26 -05:00
Theodore Ts'o 9e47a4c9fc ext4: sanity check the block and cluster size at mount time
If the block size or cluster size is insane, reject the mount.  This
is important for security reasons (although we shouldn't be just
depending on this check).

Ref: http://www.securityfocus.com/archive/1/539661
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2016-11-18 13:00:24 -05:00
Eric Whitney d5c8dab6a8 ext4: remove parameter from ext4_xattr_ibody_set()
The parameter "handle" isn't used.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-14 21:56:48 -05:00
Eric Whitney 88e0387769 ext4: allow inode expansion for nojournal file systems
Runs of xfstest ext4/022 on nojournal file systems result in failures
because the inodes of some of its test files do not expand as expected.
The cause is a conditional in ext4_mark_inode_dirty() that prevents inode
expansion unless the test file system has a journal.  Remove this
unnecessary restriction.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-14 21:48:35 -05:00
Deepa Dinamani eeca7ea1ba ext4: use current_time() for inode timestamps
CURRENT_TIME_SEC and CURRENT_TIME are not y2038 safe.
current_time() will be transitioned to be y2038 safe
along with vfs.

current_time() returns timestamps according to the
granularities set in the super_block.
The granularity check in ext4_current_time() to call
current_time() or CURRENT_TIME_SEC is not required.
Use current_time() directly to obtain timestamps
unconditionally, and remove ext4_current_time().

Quota files are assumed to be on the same filesystem.
Hence, use current_time() for these files as well.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2016-11-14 21:40:10 -05:00
Chandan Rajendra 30a9d7afe7 ext4: fix stack memory corruption with 64k block size
The number of 'counters' elements needed in 'struct sg' is
super_block->s_blocksize_bits + 2. Presently we have 16 'counters'
elements in the array. This is insufficient for block sizes >= 32k. In
such cases the memcpy operation performed in ext4_mb_seq_groups_show()
would cause stack memory corruption.

Fixes: c9de560ded
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
2016-11-14 21:26:26 -05:00
Chandan Rajendra 69e43e8cc9 ext4: fix mballoc breakage with 64k block size
'border' variable is set to a value of 2 times the block size of the
underlying filesystem. With 64k block size, the resulting value won't
fit into a 16-bit variable. Hence this commit changes the data type of
'border' to 'unsigned int'.

Fixes: c9de560ded
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
2016-11-14 21:04:37 -05:00
Theodore Ts'o 1566a48aaa ext4: don't lock buffer in ext4_commit_super if holding spinlock
If there is an error reported in mballoc via ext4_grp_locked_error(),
the code is holding a spinlock, so ext4_commit_super() must not try to
lock the buffer head, or else it will trigger a BUG:

  BUG: sleeping function called from invalid context at ./include/linux/buffer_head.h:358
  in_atomic(): 1, irqs_disabled(): 0, pid: 993, name: mount
  CPU: 0 PID: 993 Comm: mount Not tainted 4.9.0-rc1-clouder1 #62
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014
   ffff880006423548 ffffffff81318c89 ffffffff819ecdd0 0000000000000166
   ffff880006423558 ffffffff810810b0 ffff880006423580 ffffffff81081153
   ffff880006e5a1a0 ffff88000690e400 0000000000000000 ffff8800064235c0
  Call Trace:
    [<ffffffff81318c89>] dump_stack+0x67/0x9e
    [<ffffffff810810b0>] ___might_sleep+0xf0/0x140
    [<ffffffff81081153>] __might_sleep+0x53/0xb0
    [<ffffffff8126c1dc>] ext4_commit_super+0x19c/0x290
    [<ffffffff8126e61a>] __ext4_grp_locked_error+0x14a/0x230
    [<ffffffff81081153>] ? __might_sleep+0x53/0xb0
    [<ffffffff812822be>] ext4_mb_generate_buddy+0x1de/0x320

Since ext4_grp_locked_error() calls ext4_commit_super with sync == 0
(and it is the only caller which does so), avoid locking and unlocking
the buffer in this case.

This can result in races with ext4_commit_super() if there are other
problems (which is what commit 4743f83990 was trying to address),
but a Warning is better than BUG.

Fixes: 4743f83990
Cc: stable@vger.kernel.org # 4.9
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2016-11-13 22:02:29 -05:00
Theodore Ts'o d0abb36db4 ext4: allow ext4_ext_truncate() to return an error
Return errors to the caller instead of declaring the file system
corrupted.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2016-11-13 22:02:28 -05:00
Theodore Ts'o 2c98eb5ea2 ext4: allow ext4_truncate() to return an error
This allows us to properly propagate errors back up to
ext4_truncate()'s callers.  This also means we no longer have to
silently ignore some errors (e.g., when trying to add the inode to the
orphan inode list).

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2016-11-13 22:02:26 -05:00
Theodore Ts'o 6da22013bb Merge branch 'fscrypt' into origin 2016-11-13 22:02:22 -05:00
Theodore Ts'o a2f6d9c4c0 Merge branch 'dax-4.10-iomap-pmd' into origin 2016-11-13 22:02:15 -05:00
Eric Biggers a6e0891286 fscrypto: don't use on-stack buffer for key derivation
With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page.  get_crypt_info() was using a stack buffer to hold the
output from the encryption operation used to derive the per-file key.
Fix it by using a heap buffer.

This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-13 21:56:25 -05:00
Eric Biggers 08ae877f4e fscrypto: don't use on-stack buffer for filename encryption
With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page.  For short filenames, fname_encrypt() was encrypting a
stack buffer holding the padded filename.  Fix it by encrypting the
filename in-place in the output buffer, thereby making the temporary
buffer unnecessary.

This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-13 21:56:19 -05:00
David Gstir 9c4bb8a3a9 fscrypt: Let fs select encryption index/tweak
Avoid re-use of page index as tweak for AES-XTS when multiple parts of
same page are encrypted. This will happen on multiple (partial) calls of
fscrypt_encrypt_page on same page.
page->index is only valid for writeback pages.

Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-13 20:18:16 -05:00
David Gstir 0b93e1b94b fscrypt: Constify struct inode pointer
Some filesystems, such as UBIFS, maintain a const pointer for struct
inode.

Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-13 20:18:01 -05:00
David Gstir 7821d4dd45 fscrypt: Enable partial page encryption
Not all filesystems work on full pages, thus we should allow them to
hand partial pages to fscrypt for en/decryption.

Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-13 18:55:21 -05:00
David Gstir b50f7b268b fscrypt: Allow fscrypt_decrypt_page() to function with non-writeback pages
Some filesystem might pass pages which do not have page->mapping->host
set to the encrypted inode. We want the caller to explicitly pass the
corresponding inode.

Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-13 18:53:10 -05:00
David Gstir 1c7dcf69ee fscrypt: Add in-place encryption mode
ext4 and f2fs require a bounce page when encrypting pages. However, not
all filesystems will need that (eg. UBIFS). This is handled via a
flag on fscrypt_operations where a fs implementation can select in-place
encryption over using a bounce page (which is the default).

Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-11-13 18:47:04 -05:00
Jan Kara 9484ab1bf4 dax: Introduce IOMAP_FAULT flag
Introduce a flag telling iomap operations whether they are handling a
fault or other IO. That may influence behavior wrt inode size and
similar things.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-10 10:26:50 +11:00
Ross Zwisler 190b5caad7 dax: remove "depends on BROKEN" from FS_DAX_PMD
Now that DAX PMD faults are once again working and are now participating in
DAX's radix tree locking scheme, allow their config option to be enabled.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:35:16 +11:00
Ross Zwisler 862f1b9d67 xfs: use struct iomap based DAX PMD fault path
Switch xfs_filemap_pmd_fault() from using dax_pmd_fault() to the new and
improved dax_iomap_pmd_fault().  Also, now that it has no more users,
remove xfs_get_blocks_dax_fault().

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:35:02 +11:00
Ross Zwisler 642261ac99 dax: add struct iomap based DAX PMD support
DAX PMDs have been disabled since Jan Kara introduced DAX radix tree based
locking.  This patch allows DAX PMDs to participate in the DAX radix tree
based locking scheme so that they can be re-enabled using the new struct
iomap based fault handlers.

There are currently three types of DAX 4k entries: 4k zero pages, 4k DAX
mappings that have an associated block allocation, and 4k DAX empty
entries.  The empty entries exist to provide locking for the duration of a
given page fault.

This patch adds three equivalent 2MiB DAX entries: Huge Zero Page (HZP)
entries, PMD DAX entries that have associated block allocations, and 2 MiB
DAX empty entries.

Unlike the 4k case where we insert a struct page* into the radix tree for
4k zero pages, for HZP we insert a DAX exceptional entry with the new
RADIX_DAX_HZP flag set.  This is because we use a single 2 MiB zero page in
every 2MiB hole mapping, and it doesn't make sense to have that same struct
page* with multiple entries in multiple trees.  This would cause contention
on the single page lock for the one Huge Zero Page, and it would break the
page->index and page->mapping associations that are assumed to be valid in
many other places in the kernel.

One difficult use case is when one thread is trying to use 4k entries in
radix tree for a given offset, and another thread is using 2 MiB entries
for that same offset.  The current code handles this by making the 2 MiB
user fall back to 4k entries for most cases.  This was done because it is
the simplest solution, and because the use of 2MiB pages is already
opportunistic.

If we were to try to upgrade from 4k pages to 2MiB pages for a given range,
we run into the problem of how we lock out 4k page faults for the entire
2MiB range while we clean out the radix tree so we can insert the 2MiB
entry.  We can solve this problem if we need to, but I think that the cases
where both 2MiB entries and 4K entries are being used for the same range
will be rare enough and the gain small enough that it probably won't be
worth the complexity.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:34:45 +11:00
Ross Zwisler 422476c464 dax: move put_(un)locked_mapping_entry() in dax.c
No functional change.

The static functions put_locked_mapping_entry() and
put_unlocked_mapping_entry() will soon be used in error cases in
grab_mapping_entry(), so move their definitions above this function.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:33:44 +11:00
Ross Zwisler fa28f7296a dax: move RADIX_DAX_* defines to dax.h
The RADIX_DAX_* defines currently mostly live in fs/dax.c, with just
RADIX_DAX_ENTRY_LOCK being in include/linux/dax.h so it can be used in
mm/filemap.c.  When we add PMD support, though, mm/filemap.c will also need
access to the RADIX_DAX_PTE type so it can properly construct a 4k sized
empty entry.

Instead of shifting the defines between dax.c and dax.h as they are
individually used in other code, just move them wholesale to dax.h so
they'll be available when we need them.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:33:35 +11:00
Ross Zwisler 1550290b08 dax: dax_iomap_fault() needs to call iomap_end()
Currently iomap_end() doesn't do anything for DAX page faults for both ext2
and XFS.  ext2_iomap_end() just checks for a write underrun, and
xfs_file_iomap_end() checks to see if it needs to finish a delayed
allocation.  However, in the future iomap_end() calls might be needed to
make sure we have balanced allocations, locks, etc.  So, add calls to
iomap_end() with appropriate error handling to dax_iomap_fault().

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:33:26 +11:00
Ross Zwisler 333ccc978e dax: add dax_iomap_sector() helper function
To be able to correctly calculate the sector from a file position and a
struct iomap there is a complex little bit of logic that currently happens
in both dax_iomap_actor() and dax_iomap_fault().  This will need to be
repeated yet again in the DAX PMD fault handler when it is added, so break
it out into a helper function.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:33:09 +11:00
Ross Zwisler 11c59c92f4 dax: correct dax iomap code namespace
The recently added DAX functions that use the new struct iomap data
structure were named iomap_dax_rw(), iomap_dax_fault() and
iomap_dax_actor().  These are actually defined in fs/dax.c, though, so
should be part of the "dax" namespace and not the "iomap" namespace.
Rename them to dax_iomap_rw(), dax_iomap_fault() and dax_iomap_actor()
respectively.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:32:46 +11:00
Ross Zwisler b9fde0462e dax: remove dax_pmd_fault()
dax_pmd_fault() is the old struct buffer_head + get_block_t based 2 MiB DAX
fault handler.  This fault handler has been disabled for several kernel
releases, and support for PMDs will be reintroduced using the struct iomap
interface instead.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:32:35 +11:00
Ross Zwisler 63e95b5c4f dax: coordinate locking for offsets in PMD range
DAX radix tree locking currently locks entries based on the unique
combination of the 'mapping' pointer and the pgoff_t 'index' for the entry.
This works for PTEs, but as we move to PMDs we will need to have all the
offsets within the range covered by the PMD to map to the same bit lock.
To accomplish this, for ranges covered by a PMD entry we will instead lock
based on the page offset of the beginning of the PMD entry.  The 'mapping'
pointer is still used in the same way.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:32:20 +11:00
Ross Zwisler e3ad61c64a dax: consistent variable naming for DAX entries
No functional change.

Consistently use the variable name 'entry' instead of 'ret' for DAX radix
tree entries.  This was already happening in most of the code, so update
get_unlocked_mapping_entry(), grab_mapping_entry() and
dax_unlock_mapping_entry().

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:32:12 +11:00
Ross Zwisler aada54f980 dax: remove the last BUG_ON() from fs/dax.c
Don't take down the kernel if we get an invalid 'from' and 'length'
argument pair.  Just warn once and return an error.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:32:00 +11:00
Ross Zwisler ce95ab0fa6 dax: make 'wait_table' global variable static
The global 'wait_table' variable is only used within fs/dax.c, and
generates the following sparse warning:

fs/dax.c:39:19: warning: symbol 'wait_table' was not declared. Should it be static?

Make it static so it has scope local to fs/dax.c, and to make sparse happy.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:31:44 +11:00
Ross Zwisler 03e0990fc8 ext2: remove support for DAX PMD faults
DAX PMD support was added via the following commit:

commit e7b1ea2ad6 ("ext2: huge page fault support")

I believe this path to be untested as ext2 doesn't reliably provide block
allocations that are aligned to 2MiB.  In my testing I've been unable to
get ext2 to actually fault in a PMD.  It always fails with a "pfn
unaligned" message because the sector returned by ext2_get_block() isn't
aligned.

I've tried various settings for the "stride" and "stripe_width" extended
options to mkfs.ext2, without any luck.

Since we can't reliably get PMDs, remove support so that we don't have an
untested code path that we may someday traverse when we happen to get an
aligned block allocation.  This should also make 4k DAX faults in ext2 a
bit faster since they will no longer have to call the PMD fault handler
only to get a response of VM_FAULT_FALLBACK.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:31:33 +11:00
Ross Zwisler fa0d3fce7c dax: remove buffer_size_valid()
Now that ext4 properly sets bh.b_size when we call get_block() for a hole,
rely on that value and remove the buffer_size_valid() sanity check.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:31:14 +11:00
Ross Zwisler 547edce3ba ext4: tell DAX the size of allocation holes
When DAX calls _ext4_get_block() and the file offset points to a hole we
currently don't set bh->b_size.  This is current worked around via
buffer_size_valid() in fs/dax.c.

_ext4_get_block() has the hole size information from ext4_map_blocks(), so
populate bh->b_size so we can remove buffer_size_valid() in a later patch.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 11:30:58 +11:00
Linus Torvalds fb415f222c Fixes for some recent regressions including fallout from the vmalloc'd
stack change (after which we can no longer encrypt stuff on the stack).
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYHNwpAAoJECebzXlCjuG++DMP/3mUUAF09DfFR/EHl7knDT1f
 kZ53UVHYzr02w0wXfwxVLlp2H7TdSAufgsSvPT6qksA3eY7gL6nJ9zHkl+Nv5yCx
 y6vsFWjO1QEUWFOZWCKcmT2dAI3Ddt9IhK13pfZEKN1XKvK2zWB16HEVzSg6fR2K
 NwHlpMnQUI4HWThURzwTZb1M5YhxRCAnyiv8BTAAPjbEfzPzdL7j3jxwqtH8bOWp
 qIcDDvjC744b9zy0YuAEY/NyGBhYZPdM6gWsBBes1TRzBWUL9qsUYTWDJTmg/F1l
 Or0Jz7CUEN9uOHLGnkATPDc+eBg9YFV+bSsSnJu1/W4Er7dX1Af/lol79zEp/Zw1
 Snd9FelSPj3vxmYAFTCLnHRTRgsyiDhbbb7gVrzH9bxnCrRNR6p2kY018s1Cl9Td
 uWQoNNFQwwnYxWYEeZdO5PgX+pcgoCzhHACNk5oA93YaBE0GuLHHugwwIrYE8TM1
 1iY20sLC5lJcnPqxdgnoprZnnHMuL6rx5KRbvBeflNZ4huK2PIcPJyeB83XH6s12
 G67PjJ0rfWzSBF14O/ZtQA6he+kXvnH3pKqpNnaMiBxZZ2J8E1eQvrKTLLIwmtlP
 18KKJpZIzh7jTTZ/99nAMAt/BGw97P9TToLdnI8dCxYygHEaywpEYtcsE8IWFAvA
 3XkS5QdlJhhAaAUUYBXy
 =oPbZ
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-4.9-1' of git://linux-nfs.org/~bfields/linux

Pull nfsd bugfixes from Bruce Fields:
 "Fixes for some recent regressions including fallout from the vmalloc'd
  stack change (after which we can no longer encrypt stuff on the
  stack)"

* tag 'nfsd-4.9-1' of git://linux-nfs.org/~bfields/linux:
  nfsd: Fix general protection fault in release_lock_stateid()
  svcrdma: backchannel cannot share a page for send and rcv buffers
  sunrpc: fix some missing rq_rbuffer assignments
  sunrpc: don't pass on-stack memory to sg_set_buf
  nfsd: move blocked lock handling under a dedicated spinlock
2016-11-04 20:12:10 -07:00