Граф коммитов

344 Коммитов

Автор SHA1 Сообщение Дата
Serge E. Hallyn 6b550f9495 user namespace: make signal.c respect user namespaces
ipc/mqueue.c: for __SI_MESQ, convert the uid being sent to recipient's
user namespace. (new, thanks Oleg)

__send_signal: convert current's uid to the recipient's user namespace
for any siginfo which is not SI_FROMKERNEL (patch from Oleg, thanks
again :)

do_notify_parent and do_notify_parent_cldstop: map task's uid to parent's
user namespace

ptrace_signal maps parent's uid into current's user namespace before
including in signal to current.  IIUC Oleg has argued that this shouldn't
matter as the debugger will play with it, but it seems like not converting
the value currently being set is misleading.

Changelog:
Sep 20: Inspired by Oleg's suggestion, define map_cred_ns() helper to
	simplify callers and help make clear what we are translating
        (which uid into which namespace).  Passing the target task would
	make callers even easier to read, but we pass in user_ns because
	current_user_ns() != task_cred_xxx(current, user_ns).
Sep 20: As recommended by Oleg, also put task_pid_vnr() under rcu_read_lock
	in ptrace_signal().
Sep 23: In send_signal(), detect when (user) signal is coming from an
	ancestor or unrelated user namespace.  Pass that on to __send_signal,
	which sets si_uid to 0 or overflowuid if needed.
Oct 12: Base on Oleg's fixup_uid() patch.  On top of that, handle all
	SI_FROMKERNEL cases at callers, because we can't assume sender is
	current in those cases.
Nov 10: (mhelsley) rename fixup_uid to more meaningful usern_fixup_signal_uid
Nov 10: (akpm) make the !CONFIG_USER_NS case clearer

Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
From: Serge Hallyn <serge.hallyn@canonical.com>
Subject: __send_signal: pass q->info, not info, to userns_fixup_signal_uid (v2)

Eric Biederman pointed out that passing info is a bug and could lead to a
NULL pointer deref to boot.

A collection of signal, securebits, filecaps, cap_bounds, and a few other
ltp tests passed with this kernel.

Changelog:
    Nov 18: previous patch missed a leading '&'

Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
From: Dan Carpenter <dan.carpenter@oracle.com>
Subject: ipc/mqueue: lock() => unlock() typo

There was a double lock typo introduced in b085f4bd6b21 "user namespace:
make signal.c respect user namespaces"

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:54 -08:00
Matt Fleming 5e6292c0f2 signal: add block_sigmask() for adding sigmask to current->blocked
Abstract the code sequence for adding a signal handler's sa_mask to
current->blocked because the sequence is identical for all architectures.
Furthermore, in the past some architectures actually got this code wrong,
so introduce a wrapper that all architectures can use.

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:54 -08:00
Linus Torvalds db0c2bf69a Merge branch 'for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
* 'for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
  cgroup: fix to allow mounting a hierarchy by name
  cgroup: move assignement out of condition in cgroup_attach_proc()
  cgroup: Remove task_lock() from cgroup_post_fork()
  cgroup: add sparse annotation to cgroup_iter_start() and cgroup_iter_end()
  cgroup: mark cgroup_rmdir_waitq and cgroup_attach_proc() as static
  cgroup: only need to check oldcgrp==newgrp once
  cgroup: remove redundant get/put of task struct
  cgroup: remove redundant get/put of old css_set from migrate
  cgroup: Remove unnecessary task_lock before fetching css_set on migration
  cgroup: Drop task_lock(parent) on cgroup_fork()
  cgroups: remove redundant get/put of css_set from css_set_check_fetched()
  resource cgroups: remove bogus cast
  cgroup: kill subsys->can_attach_task(), pre_attach() and attach_task()
  cgroup, cpuset: don't use ss->pre_attach()
  cgroup: don't use subsys->can_attach_task() or ->attach_task()
  cgroup: introduce cgroup_taskset and use it in subsys->can_attach(), cancel_attach() and attach()
  cgroup: improve old cgroup handling in cgroup_attach_proc()
  cgroup: always lock threadgroup during migration
  threadgroup: extend threadgroup_lock() to cover exit and exec
  threadgroup: rename signal->threadgroup_fork_lock to ->group_rwsem
  ...

Fix up conflict in kernel/cgroup.c due to commit e0197aae59e5: "cgroups:
fix a css_set not found bug in cgroup_attach_proc" that already
mentioned that the bug is fixed (differently) in Tejun's cgroup
patchset. This one, in other words.
2012-01-09 12:59:24 -08:00
Linus Torvalds 0db49b72bc Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  sched/tracing: Add a new tracepoint for sleeptime
  sched: Disable scheduler warnings during oopses
  sched: Fix cgroup movement of waking process
  sched: Fix cgroup movement of newly created process
  sched: Fix cgroup movement of forking process
  sched: Remove cfs bandwidth period check in tg_set_cfs_period()
  sched: Fix load-balance lock-breaking
  sched: Replace all_pinned with a generic flags field
  sched: Only queue remote wakeups when crossing cache boundaries
  sched: Add missing rcu_dereference() around ->real_parent usage
  [S390] fix cputime overflow in uptime_proc_show
  [S390] cputime: add sparse checking and cleanup
  sched: Mark parent and real_parent as __rcu
  sched, nohz: Fix missing RCU read lock
  sched, nohz: Set the NOHZ_BALANCE_KICK flag for idle load balancer
  sched, nohz: Fix the idle cpu check in nohz_idle_balance
  sched: Use jump_labels for sched_feat
  sched/accounting: Fix parameter passing in task_group_account_field
  sched/accounting: Fix user/system tick double accounting
  sched/accounting: Re-use scheduler statistics for the root cgroup
  ...

Fix up conflicts in
 - arch/ia64/include/asm/cputime.h, include/asm-generic/cputime.h
	usecs_to_cputime64() vs the sparse cleanups
 - kernel/sched/fair.c, kernel/time/tick-sched.c
	scheduler changes in multiple branches
2012-01-06 08:44:54 -08:00
Oleg Nesterov 8a88951b58 ptrace: ensure JOBCTL_STOP_SIGMASK is not zero after detach
This is the temporary simple fix for 3.2, we need more changes in this
area.

1. do_signal_stop() assumes that the running untraced thread in the
   stopped thread group is not possible. This was our goal but it is
   not yet achieved: a stopped-but-resumed tracee can clone the running
   thread which can initiate another group-stop.

   Remove WARN_ON_ONCE(!current->ptrace).

2. A new thread always starts with ->jobctl = 0. If it is auto-attached
   and this group is stopped, __ptrace_unlink() sets JOBCTL_STOP_PENDING
   but JOBCTL_STOP_SIGMASK part is zero, this triggers WANR_ON(!signr)
   in do_jobctl_trap() if another debugger attaches.

   Change __ptrace_unlink() to set the artificial SIGSTOP for report.

   Alternatively we could change ptrace_init_task() to copy signr from
   current, but this means we can copy it for no reason and hide the
   possible similar problems.

Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@kernel.org>		[3.1]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-04 15:01:59 -08:00
Martin Schwidefsky 648616343c [S390] cputime: add sparse checking and cleanup
Make cputime_t and cputime64_t nocast to enable sparse checking to
detect incorrect use of cputime. Drop the cputime macros for simple
scalar operations. The conversion macros are still needed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-15 14:56:19 +01:00
Tejun Heo 77e4ef99d1 threadgroup: extend threadgroup_lock() to cover exit and exec
threadgroup_lock() protected only protected against new addition to
the threadgroup, which was inherently somewhat incomplete and
problematic for its only user cgroup.  On-going migration could race
against exec and exit leading to interesting problems - the symmetry
between various attach methods, task exiting during method execution,
->exit() racing against attach methods, migrating task switching basic
properties during exec and so on.

This patch extends threadgroup_lock() such that it protects against
all three threadgroup altering operations - fork, exit and exec.  For
exit, threadgroup_change_begin/end() calls are added to exit_signals
around assertion of PF_EXITING.  For exec, threadgroup_[un]lock() are
updated to also grab and release cred_guard_mutex.

With this change, threadgroup_lock() guarantees that the target
threadgroup will remain stable - no new task will be added, no new
PF_EXITING will be set and exec won't happen.

The next patch will update cgroup so that it can take full advantage
of this change.

-v2: beefed up comment as suggested by Frederic.

-v3: narrowed scope of protection in exit path as suggested by
     Frederic.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-12 18:12:21 -08:00
Paul Gortmaker 9984de1a5a kernel: Map most files to use export.h instead of module.h
The changed files were only including linux/module.h for the
EXPORT_SYMBOL infrastructure, and nothing else.  Revector them
onto the isolated export header for faster compile times.

Nothing to see here but a whole lot of instances of:

  -#include <linux/module.h>
  +#include <linux/export.h>

This commit is only changing the kernel dir; next targets
will probably be mm, fs, the arch dirs, etc.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Serge Hallyn d178bc3a70 user namespace: usb: make usb urbs user namespace aware (v2)
Add to the dev_state and alloc_async structures the user namespace
corresponding to the uid and euid.  Pass these to kill_pid_info_as_uid(),
which can then implement a proper, user-namespace-aware uid check.

Changelog:
Sep 20: Per Oleg's suggestion: Instead of caching and passing user namespace,
	uid, and euid each separately, pass a struct cred.
Sep 26: Address Alan Stern's comments: don't define a struct cred at
	usbdev_open(), and take and put a cred at async_completed() to
	ensure it lasts for the duration of kill_pid_info_as_cred().

Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-29 13:13:08 -07:00
Oleg Nesterov c1095c6da5 signals: sys_ssetmask/sys_rt_sigsuspend should use set_current_blocked()
sys_ssetmask(), sys_rt_sigsuspend() and compat_sys_rt_sigsuspend()
change ->blocked directly.  This is not correct, see the changelog in
e6fa16ab "signal: sigprocmask() should do retarget_shared_pending()"

Change them to use set_current_blocked().

Another change is that now we are doing ->saved_sigmask = ->blocked
lockless, it doesn't make any sense to do this under ->siglock.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 12:53:36 -07:00
Linus Torvalds 8209f53d79 Merge branch 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc
* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (39 commits)
  ptrace: do_wait(traced_leader_killed_by_mt_exec) can block forever
  ptrace: fix ptrace_signal() && STOP_DEQUEUED interaction
  connector: add an event for monitoring process tracers
  ptrace: dont send SIGSTOP on auto-attach if PT_SEIZED
  ptrace: mv send-SIGSTOP from do_fork() to ptrace_init_task()
  ptrace_init_task: initialize child->jobctl explicitly
  has_stopped_jobs: s/task_is_stopped/SIGNAL_STOP_STOPPED/
  ptrace: make former thread ID available via PTRACE_GETEVENTMSG after PTRACE_EVENT_EXEC stop
  ptrace: wait_consider_task: s/same_thread_group/ptrace_reparented/
  ptrace: kill real_parent_is_ptracer() in in favor of ptrace_reparented()
  ptrace: ptrace_reparented() should check same_thread_group()
  redefine thread_group_leader() as exit_signal >= 0
  do not change dead_task->exit_signal
  kill task_detached()
  reparent_leader: check EXIT_DEAD instead of task_detached()
  make do_notify_parent() __must_check, update the callers
  __ptrace_detach: avoid task_detached(), check do_notify_parent()
  kill tracehook_notify_death()
  make do_notify_parent() return bool
  ptrace: s/tracehook_tracer_task()/ptrace_parent()/
  ...
2011-07-22 15:06:50 -07:00
Oleg Nesterov 8a35241803 ptrace: fix ptrace_signal() && STOP_DEQUEUED interaction
Simple test-case,

	int main(void)
	{
		int pid, status;

		pid = fork();
		if (!pid) {
			pause();
			assert(0);
			return 0x23;
		}

		assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0);
		assert(wait(&status) == pid);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGSTOP);

		kill(pid, SIGCONT);	// <--- also clears STOP_DEQUEUD

		assert(ptrace(PTRACE_CONT, pid, 0,0) == 0);
		assert(wait(&status) == pid);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGCONT);

		assert(ptrace(PTRACE_CONT, pid, 0, SIGSTOP) == 0);
		assert(wait(&status) == pid);
		assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGSTOP);

		kill(pid, SIGKILL);
		return 0;
	}

Without the patch it hangs. After the patch SIGSTOP "injected" by the
tracer is not ignored and stops the tracee.

Note also that if this test-case uses, say, SIGWINCH instead of SIGCONT,
everything works without the patch. This can't be right, and this is
confusing.

The problem is that SIGSTOP (or any other sig_kernel_stop() signal) has
no effect without JOBCTL_STOP_DEQUEUED. This means it is simply ignored
after PTRACE_CONT unless JOBCTL_STOP_DEQUEUED was set "by accident", say
it wasn't cleared after initial SIGSTOP sent by PTRACE_ATTACH.

At first glance we could change ptrace_signal() to add STOP_DEQUEUED
after return from ptrace_stop(), but this is not right in case when the
tracer does not change the reported SIGSTOP and SIGCONT comes in between.
This is even more wrong with PT_SEIZED, SIGCONT adds JOBCTL_TRAP_NOTIFY
which will be "lost" during the TRAP_STOP | TRAP_NOTIFY report.

So lets add STOP_DEQUEUED _before_ we report the signal. It has no effect
unless sig_kernel_stop() == T after the tracer resumes us, and in the
latter case the pending STOP_DEQUEUED means no SIGCONT in between, we
should stop.

Note also that if SIGCONT was sent, PT_SEIZED tracee will correctly
report PTRACE_EVENT_STOP/SIGTRAP and thus the tracer can notice the fact
SIGSTOP was cancelled.

Also, move the current->ptrace check from ptrace_signal() to its caller,
get_signal_to_deliver(), this looks more natural.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-07-21 17:06:53 +02:00
Paul E. McKenney a841796f11 signal: align __lock_task_sighand() irq disabling and RCU
The __lock_task_sighand() function calls rcu_read_lock() with interrupts
and preemption enabled, but later calls rcu_read_unlock() with interrupts
disabled.  It is therefore possible that this RCU read-side critical
section will be preempted and later RCU priority boosted, which means that
rcu_read_unlock() will call rt_mutex_unlock() in order to deboost itself, but
with interrupts disabled. This results in lockdep splats, so this commit
nests the RCU read-side critical section within the interrupt-disabled
region of code.  This prevents the RCU read-side critical section from
being preempted, and thus prevents the attempt to deboost with interrupts
disabled.

It is quite possible that a better long-term fix is to make rt_mutex_unlock()
disable irqs when acquiring the rt_mutex structure's ->wait_lock.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-07-20 11:04:54 -07:00
Oleg Nesterov bb3696da89 ptrace: kill real_parent_is_ptracer() in in favor of ptrace_reparented()
Kill real_parent_is_ptracer() and update the callers to use
ptrace_reparented(), after the previous patch they do the same.

Remove the unnecessary ->ptrace != 0 check in get_signal_to_deliver(),
if ptrace_reparented() == T then the task must be ptraced.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:10 +02:00
Oleg Nesterov d4f7c511c1 do not change dead_task->exit_signal
__ptrace_detach() and do_notify_parent() set task->exit_signal = -1
to mark the task dead. This is no longer needed, nobody checks
exit_signal to detect the EXIT_DEAD task.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:10 +02:00
Oleg Nesterov 53c8f9f199 make do_notify_parent() return bool
- change do_notify_parent() to return a boolean, true if the task should
  be reaped because its parent ignores SIGCHLD.

- update the only caller which checks the returned value, exit_notify().

This temporary uglifies exit_notify() even more, will be cleanuped by
the next change.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-06-27 20:30:08 +02:00
Tejun Heo a288eecce5 ptrace: kill trivial tracehooks
At this point, tracehooks aren't useful to mainline kernel and mostly
just add an extra layer of obfuscation.  Although they have comments,
without actual in-kernel users, it is difficult to tell what are their
assumptions and they're actually trying to achieve.  To mainline
kernel, they just aren't worth keeping around.

This patch kills the following trivial tracehooks.

* Ones testing whether task is ptraced.  Replace with ->ptrace test.

	tracehook_expect_breakpoints()
	tracehook_consider_ignored_signal()
	tracehook_consider_fatal_signal()

* ptrace_event() wrappers.  Call directly.

	tracehook_report_exec()
	tracehook_report_exit()
	tracehook_report_vfork_done()

* ptrace_release_task() wrapper.  Call directly.

	tracehook_finish_release_task()

* noop

	tracehook_prepare_release_task()
	tracehook_report_death()

This doesn't introduce any behavior change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-22 19:26:28 +02:00
Tejun Heo d21142ece4 ptrace: kill task_ptrace()
task_ptrace(task) simply dereferences task->ptrace and isn't even used
consistently only adding confusion.  Kill it and directly access
->ptrace instead.

This doesn't introduce any behavior change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-22 19:26:27 +02:00
Tejun Heo 544b2c91a9 ptrace: implement PTRACE_LISTEN
The previous patch implemented async notification for ptrace but it
only worked while trace is running.  This patch introduces
PTRACE_LISTEN which is suggested by Oleg Nestrov.

It's allowed iff tracee is in STOP trap and puts tracee into
quasi-running state - tracee never really runs but wait(2) and
ptrace(2) consider it to be running.  While ptracer is listening,
tracee is allowed to re-enter STOP to notify an async event.
Listening state is cleared on the first notification.  Ptracer can
also clear it by issuing INTERRUPT - tracee will re-trap into STOP
with listening state cleared.

This allows ptracer to monitor group stop state without running tracee
- use INTERRUPT to put tracee into STOP trap, issue LISTEN and then
wait(2) to wait for the next group stop event.  When it happens,
PTRACE_GETSIGINFO provides information to determine the current state.

Test program follows.

  #define PTRACE_SEIZE		0x4206
  #define PTRACE_INTERRUPT	0x4207
  #define PTRACE_LISTEN		0x4208

  #define PTRACE_SEIZE_DEVEL	0x80000000

  static const struct timespec ts1s = { .tv_sec = 1 };

  int main(int argc, char **argv)
  {
	  pid_t tracee, tracer;
	  int i;

	  tracee = fork();
	  if (!tracee)
		  while (1)
			  pause();

	  tracer = fork();
	  if (!tracer) {
		  siginfo_t si;

		  ptrace(PTRACE_SEIZE, tracee, NULL,
			 (void *)(unsigned long)PTRACE_SEIZE_DEVEL);
		  ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL);
	  repeat:
		  waitid(P_PID, tracee, NULL, WSTOPPED);

		  ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si);
		  if (!si.si_code) {
			  printf("tracer: SIG %d\n", si.si_signo);
			  ptrace(PTRACE_CONT, tracee, NULL,
				 (void *)(unsigned long)si.si_signo);
			  goto repeat;
		  }
		  printf("tracer: stopped=%d signo=%d\n",
			 si.si_signo != SIGTRAP, si.si_signo);
		  if (si.si_signo != SIGTRAP)
			  ptrace(PTRACE_LISTEN, tracee, NULL, NULL);
		  else
			  ptrace(PTRACE_CONT, tracee, NULL, NULL);
		  goto repeat;
	  }

	  for (i = 0; i < 3; i++) {
		  nanosleep(&ts1s, NULL);
		  printf("mother: SIGSTOP\n");
		  kill(tracee, SIGSTOP);
		  nanosleep(&ts1s, NULL);
		  printf("mother: SIGCONT\n");
		  kill(tracee, SIGCONT);
	  }
	  nanosleep(&ts1s, NULL);

	  kill(tracer, SIGKILL);
	  kill(tracee, SIGKILL);
	  return 0;
  }

This is identical to the program to test TRAP_NOTIFY except that
tracee is PTRACE_LISTEN'd instead of PTRACE_CONT'd when group stopped.
This allows ptracer to monitor when group stop ends without running
tracee.

  # ./test-listen
  tracer: stopped=0 signo=5
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18

-v2: Moved JOBCTL_LISTENING check in wait_task_stopped() into
     task_stopped_code() as suggested by Oleg.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-16 21:41:54 +02:00
Tejun Heo fb1d910c17 ptrace: implement TRAP_NOTIFY and use it for group stop events
Currently there's no way for ptracer to find out whether group stop
finished other than polling with INTERRUPT - GETSIGINFO - CONT
sequence.  This patch implements group stop notification for ptracer
using STOP traps.

When group stop state of a seized tracee changes, JOBCTL_TRAP_NOTIFY
is set, which schedules a STOP trap which is sticky - it isn't cleared
by other traps and at least one STOP trap will happen eventually.
STOP trap is synchronization point for event notification and the
tracer can determine the current group stop state by looking at the
signal number portion of exit code (si_status from waitid(2) or
si_code from PTRACE_GETSIGINFO).

Notifications are generated both on start and end of group stops but,
because group stop participation always happens before STOP trap, this
doesn't cause an extra trap while tracee is participating in group
stop.  The symmetry will be useful later.

Note that this notification works iff tracee is not trapped.
Currently there is no way to be notified of group stop state changes
while tracee is trapped.  This will be addressed by a later patch.

An example program follows.

  #define PTRACE_SEIZE		0x4206
  #define PTRACE_INTERRUPT	0x4207

  #define PTRACE_SEIZE_DEVEL	0x80000000

  static const struct timespec ts1s = { .tv_sec = 1 };

  int main(int argc, char **argv)
  {
	  pid_t tracee, tracer;
	  int i;

	  tracee = fork();
	  if (!tracee)
		  while (1)
			  pause();

	  tracer = fork();
	  if (!tracer) {
		  siginfo_t si;

		  ptrace(PTRACE_SEIZE, tracee, NULL,
			 (void *)(unsigned long)PTRACE_SEIZE_DEVEL);
		  ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL);
	  repeat:
		  waitid(P_PID, tracee, NULL, WSTOPPED);

		  ptrace(PTRACE_GETSIGINFO, tracee, NULL, &si);
		  if (!si.si_code) {
			  printf("tracer: SIG %d\n", si.si_signo);
			  ptrace(PTRACE_CONT, tracee, NULL,
				 (void *)(unsigned long)si.si_signo);
			  goto repeat;
		  }
		  printf("tracer: stopped=%d signo=%d\n",
			 si.si_signo != SIGTRAP, si.si_signo);
		  ptrace(PTRACE_CONT, tracee, NULL, NULL);
		  goto repeat;
	  }

	  for (i = 0; i < 3; i++) {
		  nanosleep(&ts1s, NULL);
		  printf("mother: SIGSTOP\n");
		  kill(tracee, SIGSTOP);
		  nanosleep(&ts1s, NULL);
		  printf("mother: SIGCONT\n");
		  kill(tracee, SIGCONT);
	  }
	  nanosleep(&ts1s, NULL);

	  kill(tracer, SIGKILL);
	  kill(tracee, SIGKILL);
	  return 0;
  }

In the above program, tracer keeps tracee running and gets
notification of each group stop state changes.

  # ./test-notify
  tracer: stopped=0 signo=5
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18
  mother: SIGSTOP
  tracer: SIG 19
  tracer: stopped=1 signo=19
  mother: SIGCONT
  tracer: stopped=0 signo=5
  tracer: SIG 18

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-16 21:41:53 +02:00
Tejun Heo 3544d72a0e ptrace: implement PTRACE_SEIZE
PTRACE_ATTACH implicitly issues SIGSTOP on attach which has side
effects on tracee signal and job control states.  This patch
implements a new ptrace request PTRACE_SEIZE which attaches a tracee
without trapping it or affecting its signal and job control states.

The usage is the same with PTRACE_ATTACH but it takes PTRACE_SEIZE_*
flags in @data.  Currently, the only defined flag is
PTRACE_SEIZE_DEVEL which is a temporary flag to enable PTRACE_SEIZE.
PTRACE_SEIZE will change ptrace behaviors outside of attach itself.
The changes will be implemented gradually and the DEVEL flag is to
prevent programs which expect full SEIZE behavior from using it before
all the behavior modifications are complete while allowing unit
testing.  The flag will be removed once SEIZE behaviors are completely
implemented.

* PTRACE_SEIZE, unlike ATTACH, doesn't force tracee to trap.  After
  attaching tracee continues to run unless a trap condition occurs.

* PTRACE_SEIZE doesn't affect signal or group stop state.

* If PTRACE_SEIZE'd, group stop uses PTRACE_EVENT_STOP trap which uses
  exit_code of (signr | PTRACE_EVENT_STOP << 8) where signr is one of
  the stopping signals if group stop is in effect or SIGTRAP
  otherwise, and returns usual trap siginfo on PTRACE_GETSIGINFO
  instead of NULL.

Seizing sets PT_SEIZED in ->ptrace of the tracee.  This flag will be
used to determine whether new SEIZE behaviors should be enabled.

Test program follows.

  #define PTRACE_SEIZE		0x4206
  #define PTRACE_SEIZE_DEVEL	0x80000000

  static const struct timespec ts100ms = { .tv_nsec = 100000000 };
  static const struct timespec ts1s = { .tv_sec = 1 };
  static const struct timespec ts3s = { .tv_sec = 3 };

  int main(int argc, char **argv)
  {
	  pid_t tracee;

	  tracee = fork();
	  if (tracee == 0) {
		  nanosleep(&ts100ms, NULL);
		  while (1) {
			  printf("tracee: alive\n");
			  nanosleep(&ts1s, NULL);
		  }
	  }

	  if (argc > 1)
		  kill(tracee, SIGSTOP);

	  nanosleep(&ts100ms, NULL);

	  ptrace(PTRACE_SEIZE, tracee, NULL,
		 (void *)(unsigned long)PTRACE_SEIZE_DEVEL);
	  if (argc > 1) {
		  waitid(P_PID, tracee, NULL, WSTOPPED);
		  ptrace(PTRACE_CONT, tracee, NULL, NULL);
	  }
	  nanosleep(&ts3s, NULL);
	  printf("tracer: exiting\n");
	  return 0;
  }

When the above program is called w/o argument, tracee is seized while
running and remains running.  When tracer exits, tracee continues to
run and print out messages.

  # ./test-seize-simple
  tracee: alive
  tracee: alive
  tracee: alive
  tracer: exiting
  tracee: alive
  tracee: alive

When called with an argument, tracee is seized from stopped state and
continued, and returns to stopped state when tracer exits.

  # ./test-seize
  tracee: alive
  tracee: alive
  tracee: alive
  tracer: exiting
  # ps -el|grep test-seize
  1 T     0  4720     1  0  80   0 -   941 signal ttyS0    00:00:00 test-seize

-v2: SEIZE doesn't schedule TRAP_STOP and leaves tracee running as Jan
     suggested.

-v3: PTRACE_EVENT_STOP traps now report group stop state by signr.  If
     group stop is in effect the stop signal number is returned as
     part of exit_code; otherwise, SIGTRAP.  This was suggested by
     Denys and Oleg.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-16 21:41:53 +02:00
Tejun Heo 73ddff2bee job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap
do_signal_stop() implemented both normal group stop and trap for group
stop while ptraced.  This approach has been enough but scheduled
changes require trap mechanism which can be used in more generic
manner and using group stop trap for generic trap site simplifies both
userland visible interface and implementation.

This patch adds a new jobctl flag - JOBCTL_TRAP_STOP.  When set, it
triggers a trap site, which behaves like group stop trap, in
get_signal_to_deliver() after checking for pending signals.  While
ptraced, do_signal_stop() doesn't stop itself.  It initiates group
stop if requested and schedules JOBCTL_TRAP_STOP and returns.  The
caller - get_signal_to_deliver() - is responsible for checking whether
TRAP_STOP is pending afterwards and handling it.

ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of
JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap
bits and TRAPPING so that TRAP_STOP and future trap bits don't linger
after detach.

While at it, add proper function comment to do_signal_stop() and make
it return bool.

-v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING
     instead of JOBCTL_PENDING_MASK.  This avoids accidentally
     clearing JOBCTL_STOP_CONSUME.  Spotted by Oleg.

-v3: do_signal_stop() updated to return %false without dropping
     siglock while ptraced and TRAP_STOP check moved inside for(;;)
     loop after group stop participation.  This avoids unnecessary
     relocking and also will help avoiding unnecessary traps by
     consuming group stop before handling pending traps.

-v4: Jobctl trap handling moved into a separate function -
     do_jobctl_trap().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
2011-06-16 21:41:52 +02:00
Randy Dunlap ada9c93312 signal.c: fix kernel-doc notation
Fix kernel-doc warnings in signal.c:

  Warning(kernel/signal.c:2374): No description found for parameter 'nset'
  Warning(kernel/signal.c:2374): Excess function parameter 'set' description in 'sys_rt_sigprocmask'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-14 19:12:17 -07:00
Tejun Heo dd1d677269 signal: remove three noop tracehooks
Remove the following three noop tracehooks in signals.c.

* tracehook_force_sigpending()
* tracehook_get_signal()
* tracehook_finish_jctl()

The code area is about to be updated and these hooks don't do anything
other than obfuscating the logic.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-04 18:17:11 +02:00
Tejun Heo 62c124ff3b ptrace: use bit_waitqueue for TRAPPING instead of wait_chldexit
ptracer->signal->wait_chldexit was used to wait for TRAPPING; however,
->wait_chldexit was already complicated with waker-side filtering
without adding TRAPPING wait on top of it.  Also, it unnecessarily
made TRAPPING clearing depend on the current ptrace relationship - if
the ptracee is detached, wakeup is lost.

There is no reason to use signal->wait_chldexit here.  We're just
waiting for JOBCTL_TRAPPING bit to clear and given the relatively
infrequent use of ptrace, bit_waitqueue can serve it perfectly.

This patch makes JOBCTL_TRAPPING wait use bit_waitqueue instead of
signal->wait_chldexit.

-v2: Use JOBCTL_*_BIT macros instead of ilog2() as suggested by Linus.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-04 18:17:11 +02:00
Tejun Heo 7dd3db54e7 job control: introduce task_set_jobctl_pending()
task->jobctl currently hosts JOBCTL_STOP_PENDING and will host TRAP
pending bits too.  Setting pending conditions on a dying task may make
the task unkillable.  Currently, each setting site is responsible for
checking for the condition but with to-be-added job control traps this
becomes too fragile.

This patch adds task_set_jobctl_pending() which should be used when
setting task->jobctl bits to schedule a stop or trap.  The function
performs the followings to ease setting pending bits.

* Sanity checks.

* If fatal signal is pending or PF_EXITING is set, no bit is set.

* STOP_SIGMASK is automatically cleared if new value is being set.

do_signal_stop() and ptrace_attach() are updated to use
task_set_jobctl_pending() instead of setting STOP_PENDING explicitly.
The surrounding structures around setting are changed to fit
task_set_jobctl_pending() better but there should be no userland
visible behavior difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-04 18:17:11 +02:00
Tejun Heo 6dfca32984 job control: make task_clear_jobctl_pending() clear TRAPPING automatically
JOBCTL_TRAPPING indicates that ptracer is waiting for tracee to
(re)transit into TRACED.  task_clear_jobctl_pending() must be called
when either tracee enters TRACED or the transition is cancelled for
some reason.  The former is achieved by explicitly calling
task_clear_jobctl_pending() in ptrace_stop() and the latter by calling
it at the end of do_signal_stop().

Calling task_clear_jobctl_trapping() at the end of do_signal_stop()
limits the scope TRAPPING can be used and is fragile in that seemingly
unrelated changes to tracee's control flow can lead to stuck TRAPPING.

We already have task_clear_jobctl_pending() calls on those cancelling
events to clear JOBCTL_STOP_PENDING.  Cancellations can be handled by
making those call sites use JOBCTL_PENDING_MASK instead and updating
task_clear_jobctl_pending() such that task_clear_jobctl_trapping() is
called automatically if no stop/trap is pending.

This patch makes the above changes and removes the fallback
task_clear_jobctl_trapping() call from do_signal_stop().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-04 18:17:11 +02:00
Tejun Heo 3759a0d94c job control: introduce JOBCTL_PENDING_MASK and task_clear_jobctl_pending()
This patch introduces JOBCTL_PENDING_MASK and replaces
task_clear_jobctl_stop_pending() with task_clear_jobctl_pending()
which takes an extra @mask argument.

JOBCTL_PENDING_MASK is currently equal to JOBCTL_STOP_PENDING but
future patches will add more bits.  recalc_sigpending_tsk() is updated
to use JOBCTL_PENDING_MASK instead.

task_clear_jobctl_pending() takes @mask which in subset of
JOBCTL_PENDING_MASK and clears the relevant jobctl bits.  If
JOBCTL_STOP_PENDING is set, other STOP bits are cleared together.  All
task_clear_jobctl_stop_pending() users are updated to call
task_clear_jobctl_pending() with JOBCTL_STOP_PENDING which is
functionally identical to task_clear_jobctl_stop_pending().

This patch doesn't cause any functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-04 18:17:10 +02:00
Tejun Heo 81be24b8cd ptrace: relocate set_current_state(TASK_TRACED) in ptrace_stop()
In ptrace_stop(), after arch hook is done, the task state and jobctl
bits are updated while holding siglock.  The ordering requirement
there is that TASK_TRACED is set before JOBCTL_TRAPPING is cleared to
prevent ptracer waiting on TRAPPING doesn't end up waking up TRACED is
actually set and sees TASK_RUNNING in wait(2).

Move set_current_state(TASK_TRACED) to the top of the block and
reorganize comments.  This makes the ordering more obvious
(TASK_TRACED before other updates) and helps future updates to group
stop participation.

This patch doesn't cause any functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-04 18:17:10 +02:00
Tejun Heo a8f072c1d6 job control: rename signal->group_stop and flags to jobctl and update them
signal->group_stop currently hosts mostly group stop related flags;
however, it's gonna be used for wider purposes and the GROUP_STOP_
flag prefix becomes confusing.  Rename signal->group_stop to
signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*.

Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are
defined in terms of them to allow using bitops later.

While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate
future additions.

This doesn't cause any functional change.

-v2: JOBCTL_*_BIT macros added as suggested by Linus.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-04 18:17:09 +02:00
Oleg Nesterov d92fcf0552 signal: sys_pause() should check signal_pending()
ERESTART* is always wrong without TIF_SIGPENDING. Teach sys_pause()
to handle the spurious wakeup correctly.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-25 19:22:27 +02:00
Linus Torvalds 3ed4c0583d Merge branch 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc
* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (41 commits)
  signal: trivial, fix the "timespec declared inside parameter list" warning
  job control: reorganize wait_task_stopped()
  ptrace: fix signal->wait_chldexit usage in task_clear_group_stop_trapping()
  signal: sys_sigprocmask() needs retarget_shared_pending()
  signal: cleanup sys_sigprocmask()
  signal: rename signandsets() to sigandnsets()
  signal: do_sigtimedwait() needs retarget_shared_pending()
  signal: introduce do_sigtimedwait() to factor out compat/native code
  signal: sys_rt_sigtimedwait: simplify the timeout logic
  signal: cleanup sys_rt_sigprocmask()
  x86: signal: sys_rt_sigreturn() should use set_current_blocked()
  x86: signal: handle_signal() should use set_current_blocked()
  signal: sigprocmask() should do retarget_shared_pending()
  signal: sigprocmask: narrow the scope of ->siglock
  signal: retarget_shared_pending: optimize while_each_thread() loop
  signal: retarget_shared_pending: consider shared/unblocked signals only
  signal: introduce retarget_shared_pending()
  ptrace: ptrace_check_attach() should not do s/STOPPED/TRACED/
  signal: Turn SIGNAL_STOP_DEQUEUED into GROUP_STOP_DEQUEUED
  signal: do_signal_stop: Remove the unneeded task_clear_group_stop_pending()
  ...
2011-05-20 13:33:21 -07:00
Tejun Heo 40ae717d1e ptrace: fix signal->wait_chldexit usage in task_clear_group_stop_trapping()
GROUP_STOP_TRAPPING waiting mechanism piggybacks on
signal->wait_chldexit which is primarily used to implement waiting for
wait(2) and friends.  When do_wait() waits on signal->wait_chldexit,
it uses a custom wake up callback, child_wait_callback(), which
expects the child task which is waking up the parent to be passed in
as @key to filter out spurious wakeups.

task_clear_group_stop_trapping() used __wake_up_sync() which uses NULL
@key causing the following oops if the parent was doing do_wait().

  BUG: unable to handle kernel NULL pointer dereference at 00000000000002d8
  IP: [<ffffffff810499f9>] child_wait_callback+0x29/0x80
  PGD 1d899067 PUD 1e418067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP
  last sysfs file: /sys/devices/pci0000:00/0000:00:03.0/local_cpus
  CPU 2
  Modules linked in:

  Pid: 4498, comm: test-continued Not tainted 2.6.39-rc6-work+ #32 Bochs Bochs
  RIP: 0010:[<ffffffff810499f9>]  [<ffffffff810499f9>] child_wait_callback+0x29/0x80
  RSP: 0000:ffff88001b889bf8  EFLAGS: 00010046
  RAX: 0000000000000000 RBX: ffff88001fab3af8 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff88001d91df20
  RBP: ffff88001b889c08 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
  R13: ffff88001fb70550 R14: 0000000000000000 R15: 0000000000000001
  FS:  00007f26ccae4700(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00000000000002d8 CR3: 000000001b8ac000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process test-continued (pid: 4498, threadinfo ffff88001b888000, task ffff88001fb88000)
  Stack:
   ffff88001b889c18 ffff88001fb70538 ffff88001b889c58 ffffffff810312f9
   0000000000000001 0000000200000001 ffff88001b889c58 ffff88001fb70518
   0000000000000002 0000000000000082 0000000000000001 0000000000000000
  Call Trace:
   [<ffffffff810312f9>] __wake_up_common+0x59/0x90
   [<ffffffff81035263>] __wake_up_sync_key+0x53/0x80
   [<ffffffff810352a0>] __wake_up_sync+0x10/0x20
   [<ffffffff8105a984>] task_clear_jobctl_trapping+0x44/0x50
   [<ffffffff8105bcbc>] ptrace_stop+0x7c/0x290
   [<ffffffff8105c20a>] do_signal_stop+0x28a/0x2d0
   [<ffffffff8105d27f>] get_signal_to_deliver+0x14f/0x5a0
   [<ffffffff81002175>] do_signal+0x75/0x7b0
   [<ffffffff8100292d>] do_notify_resume+0x5d/0x70
   [<ffffffff8182e36a>] retint_signal+0x46/0x8c
  Code: 00 00 55 48 89 e5 53 48 83 ec 08 0f 1f 44 00 00 8b 47 d8 83 f8 03 74 3a 85 c0 49 89 c8 75 23 89 c0 48 8b 5f e0 4c 8d 0c 40 31 c0 <4b> 39 9c c8 d8 02 00 00 74 1d 48 83 c4 08 5b c9 c3 66 0f 1f 44

Fix it by using __wake_up_sync_key() and passing in the child as @key.

I still think it's a mistake to piggyback on wait_chldexit for this.
Given the relative low frequency of ptrace use, we would be much
better off leaving already complex wait_chldexit alone and using bit
waitqueue.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
2011-05-09 14:19:54 +02:00
Oleg Nesterov 2e4f7c7769 signal: sys_sigprocmask() needs retarget_shared_pending()
sys_sigprocmask() changes current->blocked by hand. Convert this code
to use set_current_blocked().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-09 13:48:56 +02:00
Oleg Nesterov b013c39924 signal: cleanup sys_sigprocmask()
Cleanup. Remove the unneeded goto's, we can simply read blocked.sig[0]
unconditionally and then copy-to-user it if oset != NULL.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-28 13:01:40 +02:00
Oleg Nesterov 702a5073fd signal: rename signandsets() to sigandnsets()
As Tejun and Linus pointed out, "nand" is the wrong name for "x & ~y",
it should be "andn". Rename signandsets() as suggested.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-04-28 13:01:39 +02:00
Oleg Nesterov b182801ab3 signal: do_sigtimedwait() needs retarget_shared_pending()
do_sigtimedwait() changes current->blocked and thus it needs
set_current_blocked()->retarget_shared_pending().

We could use set_current_blocked() directly. It is fine to change
->real_blocked from all-zeroes to ->blocked and vice versa lockless,
but this is not immediately clear, looks racy, and needs a huge
comment to explain why this is correct.

To keep the things simple this patch adds the new static helper,
__set_task_blocked() which should be called with ->siglock held. This
way we can change both ->real_blocked and ->blocked atomically under
->siglock as the current code does. This is more understandable.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-28 13:01:39 +02:00
Oleg Nesterov 943df1485a signal: introduce do_sigtimedwait() to factor out compat/native code
Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait
to the new helper, do_sigtimedwait().

Add the comment to document the extra tick we add to timespec_to_jiffies(ts),
thanks to Linus who explained this to me.

Perhaps it would be better to move compat_sys_rt_sigtimedwait() into
signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-28 13:01:38 +02:00
Oleg Nesterov fe0faa005d signal: sys_rt_sigtimedwait: simplify the timeout logic
No functional changes, cleanup compat_sys_rt_sigtimedwait() and
sys_rt_sigtimedwait().

Calculate the timeout before we take ->siglock, this simplifies and
lessens the code. Use timespec_valid() to check the timespec.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-28 13:01:38 +02:00
Oleg Nesterov bb7efee2ca signal: cleanup sys_rt_sigprocmask()
sys_rt_sigprocmask() looks unnecessarily complicated, simplify it.
We can just read current->blocked lockless unconditionally before
anything else and then copy-to-user it if needed.  At worst we
copy 4 words on mips.

We could copy-to-user the old mask first and simplify the code even
more, but the patch tries to keep the current behaviour: we change
current->block even if copy_to_user(oset) fails.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-04-28 13:01:38 +02:00
Oleg Nesterov e6fa16ab9c signal: sigprocmask() should do retarget_shared_pending()
In short, almost every changing of current->blocked is wrong, or at least
can lead to the unexpected results.

For example. Two threads T1 and T2, T1 sleeps in sigtimedwait/pause/etc.
kill(tgid, SIG) can pick T2 for TIF_SIGPENDING. If T2 calls sigprocmask()
and blocks SIG before it notices the pending signal, nobody else can handle
this pending shared signal.

I am not sure this is bug, but at least this looks strange imho. T1 should
not sleep forever, there is a signal which should wake it up.

This patch moves the code which actually changes ->blocked into the new
helper, set_current_blocked() and changes this code to call
retarget_shared_pending() as exit_signals() does. We should only care about
the signals we just blocked, we use "newset & ~current->blocked" as a mask.

We do not check !sigisemptyset(newblocked), retarget_shared_pending() is
cheap unless mask & shared_pending.

Note: for this particular case we could simply change sigprocmask() to
return -EINTR if signal_pending(), but then we should change other callers
and, more importantly, if we need this fix then set_current_blocked() will
have more callers and some of them can't restart. See the next patch as a
random example.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-04-28 13:01:37 +02:00
Oleg Nesterov 73ef4aeb61 signal: sigprocmask: narrow the scope of ->siglock
No functional changes, preparation to simplify the review of the next change.

1. We can read current->block lockless, nobody else can ever change this mask.

2. Calculate the resulting sigset_t outside of ->siglock into the temporary
   variable, then take ->siglock and change ->blocked.

Also, kill the stale comment about BKL.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-04-28 13:01:36 +02:00
Oleg Nesterov fec9993db0 signal: retarget_shared_pending: optimize while_each_thread() loop
retarget_shared_pending() blindly does recalc_sigpending_and_wake() for
every sub-thread, this is suboptimal. We can check t->blocked and stop
looping once every bit in shared_pending has the new target.

Note: we do not take task_is_stopped_or_traced(t) into account, we are
not trying to speed up the signal delivery or to avoid the unnecessary
(but harmless) signal_wake_up(0) in this unlikely case.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-04-28 13:01:35 +02:00
Oleg Nesterov f646e227b8 signal: retarget_shared_pending: consider shared/unblocked signals only
exit_signals() checks signal_pending() before retarget_shared_pending() but
this is suboptimal. We can avoid the while_each_thread() loop in case when
there are no shared signals visible to us.

Add the "shared_pending.signal & ~blocked" check. We don't use tsk->blocked
directly but pass ~blocked as an argument, this is needed for the next patch.

Note: we can optimize this more. while_each_thread(t) can check t->blocked
into account and stop after every pending signal has the new target, see the
next patch.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-04-28 13:01:35 +02:00
Oleg Nesterov 0edceb7bcd signal: introduce retarget_shared_pending()
No functional changes. Move the notify-other-threads code from exit_signals()
to the new helper, retarget_shared_pending().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-04-28 13:01:35 +02:00
Randy Dunlap f9fa0bc1fa signal.c: fix erroneous syscall kernel-doc
Fix erroneous syscall kernel-doc comments in kernel/signal.c.

Reported-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-08 11:05:24 -07:00
Oleg Nesterov e46bc9b6fd Merge branch 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into ptrace 2011-04-07 20:44:11 +02:00
Linus Torvalds 42933bac11 Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings
2011-04-07 11:14:49 -07:00
Randy Dunlap 41c57892a2 kernel/signal.c: add kernel-doc notation to syscalls
Add kernel-doc to syscalls in signal.c.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 17:51:46 -07:00
Randy Dunlap 5aba085ede kernel/signal.c: fix typos and coding style
General coding style and comment fixes; no code changes:

 - Use multi-line-comment coding style.
 - Put some function signatures completely on one line.
 - Hyphenate some words.
 - Spell Posix as POSIX.
 - Correct typos & spellos in some comments.
 - Drop trailing whitespace.
 - End sentences with periods.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-04 17:51:46 -07:00