test_xdp_noinline fails on s390 due to a handful of endianness issues.
Use ntohs for parsing eth_proto.
Replace bswaps with ntohs/htons.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test looks up a 32-bit map element and then loads it using a 64-bit
load. This does not work on s390, which is a big-endian machine.
Since the point of this test doesn't seem to be loading a smaller value
using a larger load, simply use a 32-bit load.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tracepoints to allow debugging of the event chain leading to
a pnfs fallback to doing I/O through the MDS.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Kernel build warns:
'sanitize_boot_params' defined but not used [-Wunused-function]
at below files:
arch/x86/boot/compressed/cmdline.c
arch/x86/boot/compressed/error.c
arch/x86/boot/compressed/early_serial_console.c
arch/x86/boot/compressed/acpi.c
That's becausethey each include misc.h which includes a definition of
sanitize_boot_params() via bootparam_utils.h.
Remove the inclusion from misc.h and have the c file including
bootparam_utils.h directly.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1563283092-1189-1-git-send-email-zhenzhong.duan@oracle.com
If the client has to stop in pnfs_update_layout() to wait for another
layoutget to complete, it currently exits and defaults to I/O through
the MDS if the layoutget was successful.
Fixes: d03360aaf5 ("pNFS: Ensure we return the error if someone kills...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20+
- Hugepage support
- "Image" header support for RISC-V kernel binaries, compatible with
the current ARM64 "Image" header
- Initial page table setup now split into two stages
- CONFIG_SOC support (starting with SiFive SoCs)
- Avoid reserving memory between RAM start and the kernel in setup_bootmem()
- Enable high-res timers and dynamic tick in the RV64 defconfig
- Remove long-deprecated gate area stubs
- MAINTAINERS updates to switch to the newly-created shared RISC-V git
tree, and to fix a get_maintainers.pl issue for patches involving
SiFive E-mail addresses
Also, one integration fix to resolve a build problem introduced during
in the v5.3-rc1 merge window:
- Fix build break after macro-to-function conversion in
asm-generic/cacheflush.h
-----BEGIN PGP SIGNATURE-----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=SVSp
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Hugepage support
- "Image" header support for RISC-V kernel binaries, compatible with
the current ARM64 "Image" header
- Initial page table setup now split into two stages
- CONFIG_SOC support (starting with SiFive SoCs)
- Avoid reserving memory between RAM start and the kernel in
setup_bootmem()
- Enable high-res timers and dynamic tick in the RV64 defconfig
- Remove long-deprecated gate area stubs
- MAINTAINERS updates to switch to the newly-created shared RISC-V git
tree, and to fix a get_maintainers.pl issue for patches involving
SiFive E-mail addresses
Also, one integration fix to resolve a build problem introduced during
in the v5.3-rc1 merge window:
- Fix build break after macro-to-function conversion in
asm-generic/cacheflush.h
* tag 'riscv/for-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix build break after macro-to-function conversion in generic cacheflush.h
RISC-V: Add an Image header that boot loader can parse.
RISC-V: Setup initial page tables in two stages
riscv: remove free_initrd_mem
riscv: ccache: Remove unused variable
riscv: Introduce huge page support for 32/64bit kernel
x86, arm64: Move ARCH_WANT_HUGE_PMD_SHARE config in arch/Kconfig
RISC-V: Fix memory reservation in setup_bootmem()
riscv: defconfig: enable SOC_SIFIVE
riscv: select SiFive platform drivers with SOC_SIFIVE
arch: riscv: add config option for building SiFive's SoC resource
riscv: Remove gate area stubs
MAINTAINERS: change the arch/riscv git tree to the new shared tree
MAINTAINERS: don't automatically patches involving SiFive to the linux-riscv list
RISC-V: defconfig: Enable NO_HZ_IDLE and HIGH_RES_TIMERS
Pull parisc fixes from Helge Deller:
- Prevent kernel panics by adding proper checking of register values
injected via the ptrace interface
- Wire up the new clone3 syscall
* 'parisc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Wire up clone3 syscall
parisc: Avoid kernel panic triggered by invalid kprobe
parisc: Ensure userspace privilege for ptraced processes in regset functions
parisc: Fix kernel panic due invalid values in IAOQ0 or IAOQ1
[WHY] dc sw clock implementation of navi10 and raven are not exact the
same. dcccg, dchub reference clock initialization is done after dc calls
vbios dispcontroller_init table. for raven family, before
dispcontroller_init is called by dc, the ref clk values are referred
by sw clock implementation and program asic register using wrong
values. this causes dchub pstate error. This need provide valid ref
clk values. for navi10, since dispcontroller_init is not called,
dchubbub_global_timer_enable = 0, hubbub2_get_dchub_ref_freq will
hit aeert. this need remove hubbub2_get_dchub_ref_freq from this
location and move to dcn20_init_hw.
[HOW] for all asic, initialize dccg, dchub ref clk with data from
vbios firmware table by default. for raven asic family, use these data
from vbios, for asic which support sw dccg component, like navi10,
read ref clk by sw dccg functions and update the ref clk.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dpm sensor function already does this for us. This fixes
the freq*_input files with the new SMU implementation.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Workaround for now to avoid underflow.
The uclk switch time should really be bumped up to 404, but doing so
would expose p-state hang issues for higher bandwidth display
configurations.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Variable allocated by kvmalloc should not be freed by kfree.
Because it may be allocated by vmalloc.
So replace kfree with kvfree here.
Fixes: 9b1f298236 ("net/mlx5: Add support for FW fatal reporter dump")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Summary of modules changes for the 5.3 merge window:
- Code fixes and cleanups
- Fix bug where set_memory_x() wasn't being called when rodata=n
- Fix bug where -EEXIST was being returned for going modules
- Allow arches to override module_exit_section()
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/sk3
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 5.3 merge window:
- Code fixes and cleanups
- Fix bug where set_memory_x() wasn't being called when rodata=n
- Fix bug where -EEXIST was being returned for going modules
- Allow arches to override module_exit_section()"
* tag 'modules-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
modules: fix compile error if don't have strict module rwx
ARM: module: recognize unwind exit sections
module: allow arch overrides for .exit section names
modules: fix BUG when load module with rodata=n
kernel/module: Fix mem leak in module_add_modinfo_attrs
kernel: module: Use struct_size() helper
kernel/module.c: Only return -EEXIST for modules that have finished loading
Add myself to maintainers since i provided the XDP and page_pool
implementation
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
cifs has both source and destination inodes locked throughout the copy.
Like ->write_iter(), we update mtime and strip setuid bits of destination
file before copy and like ->read_iter(), we update atime of source file
after copy.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a route needs to be appended to an existing multipath route,
fib6_add_rt2node() first appends it to the siblings list and increments
the number of sibling routes on each sibling.
Later, the function notifies the route via call_fib6_entry_notifiers().
In case the notification is vetoed, the route is not unlinked from the
siblings list, which can result in a use-after-free.
Fix this by unlinking the route from the siblings list before returning
an error.
Audited the rest of the call sites from which the FIB notification chain
is called and could not find more problems.
Fixes: 2233000cba ("net/ipv6: Move call_fib6_entry_notifiers up for route adds")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A Clang-built kernel is showing the following warning:
arch/x86/kernel/platform-quirks.o: warning: objtool: x86_early_init_platform_quirks()+0x84: unreachable instruction
That corresponds to this code:
7e: 0f 85 00 00 00 00 jne 84 <x86_early_init_platform_quirks+0x84>
80: R_X86_64_PC32 __x86_indirect_thunk_r11-0x4
84: c3 retq
This is a conditional retpoline sibling call, which is now possible
thanks to retpolines. Objtool hasn't seen that before. It's
incorrectly interpreting the conditional jump as an unconditional
dynamic jump.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/30d4c758b267ef487fb97e6ecb2f148ad007b554.1563413318.git.jpoimboe@redhat.com
This makes it easier to add new instruction types. Also it's hopefully
more robust since the compiler should warn about out-of-range enums.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/0740e96af0d40e54cfd6a07bf09db0fbd10793cd.1563413318.git.jpoimboe@redhat.com
This fixes objtool for both a GCC issue and a Clang issue:
1) GCC issue:
kernel/bpf/core.o: warning: objtool: ___bpf_prog_run()+0x8d5: sibling call from callable instruction with modified stack frame
With CONFIG_RETPOLINE=n, GCC is doing the following optimization in
___bpf_prog_run().
Before:
select_insn:
jmp *jumptable(,%rax,8)
...
ALU64_ADD_X:
...
jmp select_insn
ALU_ADD_X:
...
jmp select_insn
After:
select_insn:
jmp *jumptable(, %rax, 8)
...
ALU64_ADD_X:
...
jmp *jumptable(, %rax, 8)
ALU_ADD_X:
...
jmp *jumptable(, %rax, 8)
This confuses objtool. It has never seen multiple indirect jump
sites which use the same jump table.
For GCC switch tables, the only way of detecting the size of a table
is by continuing to scan for more tables. The size of the previous
table can only be determined after another switch table is found, or
when the scan reaches the end of the function.
That logic was reused for C jump tables, and was based on the
assumption that each jump table only has a single jump site. The
above optimization breaks that assumption.
2) Clang issue:
drivers/usb/misc/sisusbvga/sisusb.o: warning: objtool: sisusb_write_mem_bulk()+0x588: can't find switch jump table
With clang 9, code can be generated where a function contains two
indirect jump instructions which use the same switch table.
The fix is the same for both issues: split the jump table parsing into
two passes.
In the first pass, locate the heads of all switch tables for the
function and mark their locations.
In the second pass, parse the switch tables and add them.
Fixes: e55a73251d ("bpf: Fix ORC unwinding in non-JIT BPF code")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/e995befaada9d4d8b2cf788ff3f566ba900d2b4d.1563413318.git.jpoimboe@redhat.com
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Now that C jump tables are supported, call them "jump tables" instead of
"switch tables". Also rename some other variables, add comments, and
simplify the code flow a bit.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/cf951b0c0641628e0b9b81f7ceccd9bcabcb4bd8.1563413318.git.jpoimboe@redhat.com
Even calls to __noreturn functions need the frame pointer setup first.
Such functions often dump the stack.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/aed62fbd60e239280218be623f751a433658e896.1563413318.git.jpoimboe@redhat.com
dead_end_function() can no longer return an error. Simplify its
interface by making it return boolean.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/9e6679610768fb6e6c51dca23f7d4d0c03b0c910.1563413318.git.jpoimboe@redhat.com
- Add an alias check in validate_functions(). With this change, aliases
no longer need uaccess_safe set.
- Add an alias check in decode_instructions(). With this change, the
"if (!insn->func)" check is no longer needed.
- Don't create aliases for zero-length functions, as it can have
unexpected results. The next patch will spit out a warning for
zero-length functions anyway.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/26a99c31426540f19c9a58b9e10727c385a147bc.1563413318.git.jpoimboe@redhat.com
If 'insn->func' is NULL, objtool skips some important checks, including
sibling call validation. So if some .fixup code does an invalid sibling
call, objtool ignores it.
Treat all code branches (including alts) as part of the original
function by keeping track of the original func value from
validate_functions().
This improves the usefulness of some clang function fallthrough
warnings, and exposes some additional kernel bugs in the process.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/505df630f33c9717e1ccde6e4b64c5303135c25f.1563413318.git.jpoimboe@redhat.com
After an objtool improvement, it's reporting that __memcpy_mcsafe() is
calling mcsafe_handle_tail() with AC=1:
arch/x86/lib/memcpy_64.o: warning: objtool: .fixup+0x13: call to mcsafe_handle_tail() with UACCESS enabled
arch/x86/lib/memcpy_64.o: warning: objtool: __memcpy_mcsafe()+0x34: (alt)
arch/x86/lib/memcpy_64.o: warning: objtool: __memcpy_mcsafe()+0xb: (branch)
arch/x86/lib/memcpy_64.o: warning: objtool: __memcpy_mcsafe()+0x0: <=== (func)
mcsafe_handle_tail() is basically an extension of __memcpy_mcsafe(), so
AC=1 is supposed to be set. Add mcsafe_handle_tail() to the uaccess
safe list.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/035c38f7eac845281d3c3d36749144982e06e58c.1563413318.git.jpoimboe@redhat.com
On x86-64, with CONFIG_RETPOLINE=n, GCC's "global common subexpression
elimination" optimization results in ___bpf_prog_run()'s jumptable code
changing from this:
select_insn:
jmp *jumptable(, %rax, 8)
...
ALU64_ADD_X:
...
jmp *jumptable(, %rax, 8)
ALU_ADD_X:
...
jmp *jumptable(, %rax, 8)
to this:
select_insn:
mov jumptable, %r12
jmp *(%r12, %rax, 8)
...
ALU64_ADD_X:
...
jmp *(%r12, %rax, 8)
ALU_ADD_X:
...
jmp *(%r12, %rax, 8)
The jumptable address is placed in a register once, at the beginning of
the function. The function execution can then go through multiple
indirect jumps which rely on that same register value. This has a few
issues:
1) Objtool isn't smart enough to be able to track such a register value
across multiple recursive indirect jumps through the jump table.
2) With CONFIG_RETPOLINE enabled, this optimization actually results in
a small slowdown. I measured a ~4.7% slowdown in the test_bpf
"tcpdump port 22" selftest.
This slowdown is actually predicted by the GCC manual:
Note: When compiling a program using computed gotos, a GCC
extension, you may get better run-time performance if you
disable the global common subexpression elimination pass by
adding -fno-gcse to the command line.
So just disable the optimization for this function.
Fixes: e55a73251d ("bpf: Fix ORC unwinding in non-JIT BPF code")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/30c3ca29ba037afcbd860a8672eef0021addf9fe.1563413318.git.jpoimboe@redhat.com
The same getuser/putuser error paths are used regardless of whether AC
is set. In non-exception failure cases, this results in an unnecessary
CLAC.
Fixes the following warnings:
arch/x86/lib/getuser.o: warning: objtool: .altinstr_replacement+0x18: redundant UACCESS disable
arch/x86/lib/putuser.o: warning: objtool: .altinstr_replacement+0x18: redundant UACCESS disable
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/bc14ded2755ae75bd9010c446079e113dbddb74b.1563413318.git.jpoimboe@redhat.com
After adding mcsafe_handle_tail() to the objtool uaccess safe list,
objtool reports:
arch/x86/lib/usercopy_64.o: warning: objtool: mcsafe_handle_tail()+0x0: call to __fentry__() with UACCESS enabled
With SMAP, this function is called with AC=1, so it needs to be careful
about which functions it calls. Disable the ftrace entry hook, which
can potentially pull in a lot of extra code.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/8e13d6f0da1c8a3f7603903da6cbf6d582bbfe10.1563413318.git.jpoimboe@redhat.com
After an objtool improvement, it's complaining about the CLAC in
copy_user_handle_tail():
arch/x86/lib/copy_user_64.o: warning: objtool: .altinstr_replacement+0x12: redundant UACCESS disable
arch/x86/lib/copy_user_64.o: warning: objtool: copy_user_handle_tail()+0x6: (alt)
arch/x86/lib/copy_user_64.o: warning: objtool: copy_user_handle_tail()+0x2: (alt)
arch/x86/lib/copy_user_64.o: warning: objtool: copy_user_handle_tail()+0x0: <=== (func)
copy_user_handle_tail() is incorrectly marked as a callable function, so
objtool is rightfully concerned about the CLAC with no corresponding
STAC.
Remove the ELF function annotation. The copy_user_handle_tail() code
path is already verified by objtool because it's jumped to by other
callable asm code (which does the corresponding STAC).
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/6b6e436774678b4b9873811ff023bd29935bee5b.1563413318.git.jpoimboe@redhat.com
After an objtool improvement, it complains about the fact that
start_cpu0() jumps to code which has an LRET instruction.
arch/x86/kernel/head_64.o: warning: objtool: .head.text+0xe4: unsupported instruction in callable function
Technically, start_cpu0() is callable, but it acts nothing like a
callable function. Prevent objtool from treating it like one by
removing its ELF function annotation.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/6b1b4505fcb90571a55fa1b52d71fb458ca24454.1563413318.git.jpoimboe@redhat.com
Fix the following warnings:
arch/x86/entry/thunk_64.o: warning: objtool: trace_hardirqs_on_thunk() is missing an ELF size annotation
arch/x86/entry/thunk_64.o: warning: objtool: trace_hardirqs_off_thunk() is missing an ELF size annotation
arch/x86/entry/thunk_64.o: warning: objtool: lockdep_sys_exit_thunk() is missing an ELF size annotation
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/89c97adc9f6cc44a0f5d03cde6d0357662938909.1563413318.git.jpoimboe@redhat.com
After making a change to improve objtool's sibling call detection, it
started showing the following warning:
arch/x86/kvm/vmx/nested.o: warning: objtool: .fixup+0x15: sibling call from callable instruction with modified stack frame
The problem is the ____kvm_handle_fault_on_reboot() macro. It does a
fake call by pushing a fake RIP and doing a jump. That tricks the
unwinder into printing the function which triggered the exception,
rather than the .fixup code.
Instead of the hack to make it look like the original function made the
call, just change the macro so that the original function actually does
make the call. This allows removal of the hack, and also makes objtool
happy.
I triggered a vmx instruction exception and verified that the stack
trace is still sane:
kernel BUG at arch/x86/kvm/x86.c:358!
invalid opcode: 0000 [#1] SMP PTI
CPU: 28 PID: 4096 Comm: qemu-kvm Not tainted 5.2.0+ #16
Hardware name: Lenovo THINKSYSTEM SD530 -[7X2106Z000]-/-[7X2106Z000]-, BIOS -[TEE113Z-1.00]- 07/17/2017
RIP: 0010:kvm_spurious_fault+0x5/0x10
Code: 00 00 00 00 00 8b 44 24 10 89 d2 45 89 c9 48 89 44 24 10 8b 44 24 08 48 89 44 24 08 e9 d4 40 22 00 0f 1f 40 00 0f 1f 44 00 00 <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41
RSP: 0018:ffffbf91c683bd00 EFLAGS: 00010246
RAX: 000061f040000000 RBX: ffff9e159c77bba0 RCX: ffff9e15a5c87000
RDX: 0000000665c87000 RSI: ffff9e15a5c87000 RDI: ffff9e159c77bba0
RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9e15a5c87000
R10: 0000000000000000 R11: fffff8f2d99721c0 R12: ffff9e159c77bba0
R13: ffffbf91c671d960 R14: ffff9e159c778000 R15: 0000000000000000
FS: 00007fa341cbe700(0000) GS:ffff9e15b7400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdd38356804 CR3: 00000006759de003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
loaded_vmcs_init+0x4f/0xe0
alloc_loaded_vmcs+0x38/0xd0
vmx_create_vcpu+0xf7/0x600
kvm_vm_ioctl+0x5e9/0x980
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
? __switch_to_asm+0x34/0x70
? free_one_page+0x13f/0x4e0
do_vfs_ioctl+0xa4/0x630
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x55/0x1c0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fa349b1ee5b
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/64a9b64d127e87b6920a97afde8e96ea76f6524e.1563413318.git.jpoimboe@redhat.com
Objtool reports the following:
arch/x86/kvm/vmx/vmenter.o: warning: objtool: vmx_vmenter()+0x14: call without frame pointer save/setup
But frame pointers are necessarily broken anyway, because
__vmx_vcpu_run() clobbers RBP with the guest's value before calling
vmx_vmenter(). So calling without a frame pointer doesn't make things
any worse.
Make objtool happy by changing the call to a UD2.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/9fc2216c9dc972f95bb65ce2966a682c6bda1cb0.1563413318.git.jpoimboe@redhat.com
Some of the fastop functions, e.g. em_setcc(), are actually just used as
global labels which point to blocks of functions. The global labels are
incorrectly annotated as functions. Also the functions themselves don't
have size annotations.
Fixes a bunch of warnings like the following:
arch/x86/kvm/emulate.o: warning: objtool: seto() is missing an ELF size annotation
arch/x86/kvm/emulate.o: warning: objtool: em_setcc() is missing an ELF size annotation
arch/x86/kvm/emulate.o: warning: objtool: setno() is missing an ELF size annotation
arch/x86/kvm/emulate.o: warning: objtool: setc() is missing an ELF size annotation
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/c8cc9be60ebbceb3092aa5dd91916039a1f88275.1563413318.git.jpoimboe@redhat.com
The __raw_callee_save_*() functions have an ELF symbol size of zero,
which confuses objtool and other tools.
Fixes a bunch of warnings like the following:
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pte_val() is missing an ELF size annotation
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pgd_val() is missing an ELF size annotation
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pte() is missing an ELF size annotation
arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pgd() is missing an ELF size annotation
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/afa6d49bb07497ca62e4fc3b27a2d0cece545b4e.1563413318.git.jpoimboe@redhat.com
First set of fixes for 5.3.
iwlwifi
* add new cards for 9000 and 20000 series and qu c-step devices
ath10k
* workaround an uninitialised variable warning
rt2x00
* fix rx queue hand on USB
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdMHsXAAoJEG4XJFUm622btf4H/jhvqhD2z/1N9Xa35LhLSZNQ
VxulUarlJ5oiHMSOYIJfftgz5wjw3Og5tY2x3GkcxeXkZqGhTFZle2itO1UicPlt
CmLDbwN2WC8bnZNRAS79094Dr6iDigw9nDZ3ND9G77mRuuKiwPk6M4R9nYfvOk6d
9j8TFvxVn5mBr+8xw254dWSVY/Um/Vu0J49GgqSIXVvsi4JQVMc47WObeQ/PrQre
bUFBUD+CJ/Jei/Y0/HrvKo7f1HQMcWHPhAkru6VExT89gvwW98nPUtA4+EonMZpA
AJ4JQwA6olD6e/N2/6KTghdbRgC7aYT7SwskPdWKgIBeF9HeotomjXVWQiBbcw0=
=Z4Ai
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2019-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.3
First set of fixes for 5.3.
iwlwifi
* add new cards for 9000 and 20000 series and qu c-step devices
ath10k
* workaround an uninitialised variable warning
rt2x00
* fix rx queue hand on USB
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use vzalloc and vzalloc_node instead of using vmalloc and
vmalloc_node and then zeroing the allocated memory by
memset 0.
This simplifies the code.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prevent deadlock between open_shroot() and
cifs_mark_open_files_invalid() by releasing the lock before entering
SMB2_open, taking it again after and checking if we still need to use
the result.
Link: https://lore.kernel.org/linux-cifs/684ed01c-cbca-2716-bc28-b0a59a0f8521@prodrive-technologies.com/T/#u
Fixes: 3d4ef9a153 ("smb3: fix redundant opens on root")
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
- Add user space specific memory reading for kprobes
- Allow kprobes to be executed earlier in boot
The rest are mostly just various clean ups and small fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXS88txQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhaPAQDHaAmu6wXtZjZE6GU4ZP61UNgDECmZ
4wlGrNc1AAlqAQD/QC8339p37aDCp9n27VY1wmJwF3nca+jAHfQLqWkkYgw=
=n/tz
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The main changes in this release include:
- Add user space specific memory reading for kprobes
- Allow kprobes to be executed earlier in boot
The rest are mostly just various clean ups and small fixes"
* tag 'trace-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
tracing: Make trace_get_fields() global
tracing: Let filter_assign_type() detect FILTER_PTR_STRING
tracing: Pass type into tracing_generic_entry_update()
ftrace/selftest: Test if set_event/ftrace_pid exists before writing
ftrace/selftests: Return the skip code when tracing directory not configured in kernel
tracing/kprobe: Check registered state using kprobe
tracing/probe: Add trace_event_call accesses APIs
tracing/probe: Add probe event name and group name accesses APIs
tracing/probe: Add trace flag access APIs for trace_probe
tracing/probe: Add trace_event_file access APIs for trace_probe
tracing/probe: Add trace_event_call register API for trace_probe
tracing/probe: Add trace_probe init and free functions
tracing/uprobe: Set print format when parsing command
tracing/kprobe: Set print format right after parsed command
kprobes: Fix to init kprobes in subsys_initcall
tracepoint: Use struct_size() in kmalloc()
ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS
ftrace: Enable trampoline when rec count returns back to one
tracing/kprobe: Do not run kprobe boot tests if kprobe_event is on cmdline
tracing: Make a separate config for trace event self tests
...
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"One compiler fix, and a bug-fix in swiotlb_nr_tbl() and
swiotlb_max_segment() to check also for no_iotlb_memory"
* 'for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: fix phys_addr_t overflow warning
swiotlb: Return consistent SWIOTLB segments/nr_tbl
swiotlb: Group identical cleanup in swiotlb_cleanup()
Currently we silently ignore filters if we cannot meet the filter
requirements. This will lead to the MAC dropping packets that are
expected to pass. A better solution would be to set the NIC to promisc
mode when the required filters cannot be met.
Also correct the number of MDF filters supported. It should be 17,
not 16.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bvec tracks the list of pages, so if the number of pages changes
due to a re-encode, we need to reset the bvec as well.
Fixes: 277e4ab7d5 ("SUNRPC: Simplify TCP receive code by switching...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20+
mirror->mirror_ds can be NULL if uninitialised, but can contain
a PTR_ERR() if call to GETDEVICEINFO failed.
Fixes: 65990d1afb ("pNFS/flexfiles: Fix a deadlock on LAYOUTGET")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # 4.10+
Ilya Leoshkevich
Trond Myklebust
Zhenzhong Duan
Linus Torvalds
hersen wu
Alex Deucher
Nicholas Kazlauskas
Chuhong Yuan
Ilias Apalodimas
Amir Goldstein
Ido Schimmel
Josh Poimboeuf
Jann Horn
David S. Miller
Aurelien Aptel
Thomas Gleixner
Su Yanjun
Justin Chen