Граф коммитов

534 Коммитов

Автор SHA1 Сообщение Дата
Qian Cai c6f4ebdeba iommu/vt-d: Silence RCU-list debugging warning in dmar_find_atsr()
dmar_find_atsr() calls list_for_each_entry_rcu() outside of an RCU read
side critical section but with dmar_global_lock held. Silence this
false positive.

 drivers/iommu/intel-iommu.c:4504 RCU-list traversed in non-reader section!!
 1 lock held by swapper/0/1:
 #0: ffffffff9755bee8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x1a6/0xe19

 Call Trace:
  dump_stack+0xa4/0xfe
  lockdep_rcu_suspicious+0xeb/0xf5
  dmar_find_atsr+0x1ab/0x1c0
  dmar_parse_one_atsr+0x64/0x220
  dmar_walk_remapping_entries+0x130/0x380
  dmar_table_init+0x166/0x243
  intel_iommu_init+0x1ab/0xe19
  pci_iommu_init+0x1a/0x44
  do_one_initcall+0xae/0x4d0
  kernel_init_freeable+0x412/0x4c5
  kernel_init+0x19/0x193

Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-03-19 15:15:05 +01:00
Megha Dey 1da8347d85 iommu/vt-d: Populate debugfs if IOMMUs are detected
Currently, the intel iommu debugfs directory(/sys/kernel/debug/iommu/intel)
gets populated only when DMA remapping is enabled (dmar_disabled = 0)
irrespective of whether interrupt remapping is enabled or not.

Instead, populate the intel iommu debugfs directory if any IOMMUs are
detected.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: ee2636b867 ("iommu/vt-d: Enable base Intel IOMMU debugfs support")
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-03-14 20:02:43 +01:00
Hans de Goede 81ee85d046 iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with pr_warn + add_taint
Quoting from the comment describing the WARN functions in
include/asm-generic/bug.h:

 * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
 * significant kernel issues that need prompt attention if they should ever
 * appear at runtime.
 *
 * Do not use these macros when checking for invalid external inputs

The (buggy) firmware tables which the dmar code was calling WARN_TAINT
for really are invalid external inputs. They are not under the kernel's
control and the issues in them cannot be fixed by a kernel update.
So logging a backtrace, which invites bug reports to be filed about this,
is not helpful.

Fixes: 556ab45f9a ("ioat2: catch and recover from broken vtd configurations v6")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200309182510.373875-1-hdegoede@redhat.com
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=701847
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-03-13 14:25:45 +01:00
Hans de Goede 96788c7a7f iommu/vt-d: dmar_parse_one_rmrr: replace WARN_TAINT with pr_warn + add_taint
Quoting from the comment describing the WARN functions in
include/asm-generic/bug.h:

 * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
 * significant kernel issues that need prompt attention if they should ever
 * appear at runtime.
 *
 * Do not use these macros when checking for invalid external inputs

The (buggy) firmware tables which the dmar code was calling WARN_TAINT
for really are invalid external inputs. They are not under the kernel's
control and the issues in them cannot be fixed by a kernel update.
So logging a backtrace, which invites bug reports to be filed about this,
is not helpful.

Some distros, e.g. Fedora, have tools watching for the kernel backtraces
logged by the WARN macros and offer the user an option to file a bug for
this when these are encountered. The WARN_TAINT in dmar_parse_one_rmrr
+ another iommu WARN_TAINT, addressed in another patch, have lead to over
a 100 bugs being filed this way.

This commit replaces the WARN_TAINT("...") call, with a
pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) call
avoiding the backtrace and thus also avoiding bug-reports being filed
about this against the kernel.

Fixes: f5a68bb075 ("iommu/vt-d: Mark firmware tainted if RMRR fails sanity check")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: Barret Rhoden <brho@google.com>
Link: https://lore.kernel.org/r/20200309140138.3753-3-hdegoede@redhat.com
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1808874
2020-03-13 14:25:45 +01:00
Qian Cai 2d48ea0efb iommu/vt-d: Fix RCU-list bugs in intel_iommu_init()
There are several places traverse RCU-list without holding any lock in
intel_iommu_init(). Fix them by acquiring dmar_global_lock.

 WARNING: suspicious RCU usage
 -----------------------------
 drivers/iommu/intel-iommu.c:5216 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 no locks held by swapper/0/1.

 Call Trace:
  dump_stack+0xa0/0xea
  lockdep_rcu_suspicious+0x102/0x10b
  intel_iommu_init+0x947/0xb13
  pci_iommu_init+0x26/0x62
  do_one_initcall+0xfe/0x500
  kernel_init_freeable+0x45a/0x4f8
  kernel_init+0x11/0x139
  ret_from_fork+0x3a/0x50
 DMAR: Intel(R) Virtualization Technology for Directed I/O

Fixes: d8190dc638 ("iommu/vt-d: Enable DMA remapping after rmrr mapped")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-03-10 10:30:33 +01:00
Yonghyun Hwang 77a1bce84b iommu/vt-d: Fix a bug in intel_iommu_iova_to_phys() for huge page
intel_iommu_iova_to_phys() has a bug when it translates an IOVA for a huge
page onto its corresponding physical address. This commit fixes the bug by
accomodating the level of page entry for the IOVA and adds IOVA's lower
address to the physical address.

Cc: <stable@vger.kernel.org>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Yonghyun Hwang <yonghyun@google.com>
Fixes: 3871794642 ("VT-d: Changes to support KVM")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-03-02 17:07:48 +01:00
Joerg Roedel 1ddb32da4a iommu/vt-d: Simplify check in identity_mapping()
The function only has one call-site and there it is never called with
dummy or deferred devices. Simplify the check in the function to
account for that.

Fixes: 1ee0186b9a ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-02-18 17:21:51 +01:00
Joerg Roedel 96d170f3b1 iommu/vt-d: Remove deferred_attach_domain()
The function is now only a wrapper around find_domain(). Remove the
function and call find_domain() directly at the call-sites.

Fixes: 1ee0186b9a ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-02-18 17:21:51 +01:00
Joerg Roedel a11bfde9c7 iommu/vt-d: Do deferred attachment in iommu_need_mapping()
The attachment of deferred devices needs to happen before the check
whether the device is identity mapped or not. Otherwise the check will
return wrong results, cause warnings boot failures in kdump kernels, like

	WARNING: CPU: 0 PID: 318 at ../drivers/iommu/intel-iommu.c:592 domain_get_iommu+0x61/0x70

	[...]

	 Call Trace:
	  __intel_map_single+0x55/0x190
	  intel_alloc_coherent+0xac/0x110
	  dmam_alloc_attrs+0x50/0xa0
	  ahci_port_start+0xfb/0x1f0 [libahci]
	  ata_host_start.part.39+0x104/0x1e0 [libata]

With the earlier check the kdump boot succeeds and a crashdump is written.

Fixes: 1ee0186b9a ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-02-18 17:21:51 +01:00
Joerg Roedel 034d98cc0c iommu/vt-d: Move deferred device attachment into helper function
Move the code that does the deferred device attachment into a separate
helper function.

Fixes: 1ee0186b9a ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-02-18 17:21:51 +01:00
Joerg Roedel 1d4615978f iommu/vt-d: Add attach_deferred() helper
Implement a helper function to check whether a device's attach process
is deferred.

Fixes: 1ee0186b9a ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-02-18 17:21:51 +01:00
Linus Torvalds 4fc2ea6a86 IOMMU Updates for Linux v5.6
Including:
 
 	- Allow to compile the ARM-SMMU drivers as modules.
 
 	- Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
 	  collected by Will Deacon. The merge-commit (6855d1ba75) has all the
 	  details.
 
 	- Cleanup of the iommu_put_resv_regions() call-backs in various drivers.
 
 	- AMD IOMMU driver cleanups.
 
 	- Update for the x2APIC support in the AMD IOMMU driver.
 
 	- Preparation patches for Intel VT-d nested mode support.
 
 	- RMRR and identity domain handling fixes for the Intel VT-d driver.
 
 	- More small fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl46yTsACgkQK/BELZcB
 GuPldg//bHDyntUWHta11oHFnUh759mveFFsfYto/2dV7hyHOM1lgv2+ZaXdOYxE
 03f9d9K9b4F3amF8wkluu9Z1Lve40JpZwD3WKTTg8sImh0z61nWoJ7+uE8ZjNzmA
 /6pNqIPJ4w8n5Wz2yycTR7GeUekM0X5nvF0IBlVcX3UYFG0DDlL/eldLVSk43Wmw
 P9C2dFwQLHBKhqhquqnXP1Z7YRfG9lX2ONAoMHSj3x2fm7UySSkrioBR0VrI6+sH
 8/LFL+NgqQEZBTK0I8tZRwNuDUoHQ396PAdYEiXFFzWBLrEaadAuoh4WeLnLzlRe
 G601on9ScUg1xy4lQHQiZDNKYqeB7gETMW/V2Q5nCaTrq2i1D5M6IwiNvOiV6crj
 ZtFBqejng1BXfqLOxutHYyjNQBB/KxmWR3zT2p/spcAgxhUAJxS5GkbGm5G3OucN
 2xWSnV+Dyu5jei8Ua5/onCdcuvCFi41xa9aCRrTSymIZ2W6aCNjm2mrctyRr1xmA
 AwHBZ0/dx/v3vZA8GnkBrrvAYVsTWiMbHD/2sChDjnwedO0o0pMooHEjywmDgMON
 /qXQjqR7pDpyxDA0US+30WfA3tkUcpLskza0ugWKtr/8RcHffrt5s9L0PpklgmtN
 ILC2/zNB43mIFw8uGJdDVFw4aYuCAqIFFHkqQ5+hOBGn/ePHawc=
 =HMIT
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:

 - Allow compiling the ARM-SMMU drivers as modules.

 - Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
   collected by Will Deacon. The merge-commit (6855d1ba75) has all the
   details.

 - Cleanup of the iommu_put_resv_regions() call-backs in various
   drivers.

 - AMD IOMMU driver cleanups.

 - Update for the x2APIC support in the AMD IOMMU driver.

 - Preparation patches for Intel VT-d nested mode support.

 - RMRR and identity domain handling fixes for the Intel VT-d driver.

 - More small fixes and cleanups.

* tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
  iommu/amd: Remove the unnecessary assignment
  iommu/vt-d: Remove unnecessary WARN_ON_ONCE()
  iommu/vt-d: Unnecessary to handle default identity domain
  iommu/vt-d: Allow devices with RMRRs to use identity domain
  iommu/vt-d: Add RMRR base and end addresses sanity check
  iommu/vt-d: Mark firmware tainted if RMRR fails sanity check
  iommu/amd: Remove unused struct member
  iommu/amd: Replace two consecutive readl calls with one readq
  iommu/vt-d: Don't reject Host Bridge due to scope mismatch
  PCI/ATS: Add PASID stubs
  iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device
  iommu/arm-smmu-v3: Improve add_device() error handling
  iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE
  iommu/arm-smmu-v3: Add second level of context descriptor table
  iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure
  iommu/arm-smmu-v3: Propagate ssid_bits
  iommu/arm-smmu-v3: Add support for Substream IDs
  iommu/arm-smmu-v3: Add context descriptor tables allocators
  iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support
  ACPI/IORT: Parse SSID property of named component node
  ...
2020-02-05 17:49:54 +00:00
Linus Torvalds 26dca6dbd6 pci-v5.6-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl40PWgUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwclA/+Id/7Uc5S0r7xgFQRr3lbn0hHcx7f
 oBgmm6kGl8bu77MDiY32WLmPsp9e4BlK2M765cKQL5n20y8CzJ+kthZM8tZEDba4
 pnrZnWZ0A2xaBKzJqqYDtCqAeP97noCs4zBLo3JCA6jYCYI5bkvmdMQRlRjTUofO
 tkenGE+vexaJsLB7ghNskL3xGMueXLtLf/hXvaC6WGbSI9/zUmliHDL53DoKDPRo
 /9TGYDMwItZz+BhmBJz8hAL4naQIhIcDk2mz7CzWkY9xDhCJ1yeEwFvtvJwq0uM2
 Nmtq1g6yCB3sjlx+bRzrioLnouflztK1PGRbNugrMkR5XM9HIFmNwaDrqpU11ffA
 LQabMpbS3RWH3hbh4LYVMW13hbO+ld7/NG8jMFce2LHBWaGj6YejUQGdifz6vGRk
 JnDOgP19v5gWw08ibwkdfYzznPfMXp5IzFdJQFKhK+ugGDSJ8VeXiQ/pWtzghl3z
 P/puRw0BiL7ob/FUmhwn4J1Ytml7PZE+cJVN2l4C/CwKxR583GRUDgSHNL7Dky+o
 GcH9Tmjt4hQMNYRP01PACUmFYJwDfB+zgQ64a+uJsQwl/j+yfMnc1t/kqdM6yC9J
 GgkqLp989G/a3n9w5IC1P8aDYiwRqABvAFzlP9OZcIMUwmWbrhH175Qf6skKYIhH
 q9RKcLVXZdRS3mc=
 =fQ0E
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 "Resource management:

   - Improve resource assignment for hot-added nested bridges, e.g.,
     Thunderbolt (Nicholas Johnson)

  Power management:

   - Optionally print config space of devices before suspend (Chen Yu)

   - Increase D3 delay for AMD Ryzen5/7 XHCI controllers (Daniel Drake)

  Virtualization:

   - Generalize DMA alias quirks (James Sewart)

   - Add DMA alias quirk for PLX PEX NTB (James Sewart)

   - Fix IOV memory leak (Navid Emamdoost)

  AER:

   - Log which device prevents error recovery (Yicong Yang)

  Peer-to-peer DMA:

   - Whitelist Intel SkyLake-E (Armen Baloyan)

  Broadcom iProc host bridge driver:

   - Apply PAXC quirk whether driver is built-in or module (Wei Liu)

  Broadcom STB host bridge driver:

   - Add Broadcom STB PCIe host controller driver (Jim Quinlan)

  Intel Gateway SoC host bridge driver:

   - Add driver for Intel Gateway SoC (Dilip Kota)

  Intel VMD host bridge driver:

   - Add support for DMA aliases on other buses (Jon Derrick)

   - Remove dma_map_ops overrides (Jon Derrick)

   - Remove now-unused X86_DEV_DMA_OPS (Christoph Hellwig)

  NVIDIA Tegra host bridge driver:

   - Fix Tegra30 afi_pex2_ctrl register offset (Marcel Ziswiler)

  Panasonic UniPhier host bridge driver:

   - Remove module code since driver can't be built as a module
     (Masahiro Yamada)

  Qualcomm host bridge driver:

   - Add support for SDM845 PCIe controller (Bjorn Andersson)

  TI Keystone host bridge driver:

   - Fix "num-viewport" DT property error handling (Kishon Vijay Abraham I)

   - Fix link training retries initiation (Yurii Monakov)

   - Fix outbound region mapping (Yurii Monakov)

  Misc:

   - Add Switchtec Gen4 support (Kelvin Cao)

   - Add Switchtec Intercomm Notify and Upstream Error Containment
     support (Logan Gunthorpe)

   - Use dma_set_mask_and_coherent() since Switchtec supports 64-bit
     addressing (Wesley Sheng)"

* tag 'pci-v5.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (60 commits)
  PCI: Allow adjust_bridge_window() to shrink resource if necessary
  PCI: Set resource size directly in adjust_bridge_window()
  PCI: Rename extend_bridge_window() to adjust_bridge_window()
  PCI: Rename extend_bridge_window() parameter
  PCI: Consider alignment of hot-added bridges when assigning resources
  PCI: Remove local variable usage in pci_bus_distribute_available_resources()
  PCI: Pass size + alignment to pci_bus_distribute_available_resources()
  PCI: Rename variables
  PCI: vmd: Add two VMD Device IDs
  PCI: Remove unnecessary braces
  PCI: brcmstb: Add MSI support
  PCI: brcmstb: Add Broadcom STB PCIe host controller driver
  x86/PCI: Remove X86_DEV_DMA_OPS
  PCI: vmd: Remove dma_map_ops overrides
  iommu/vt-d: Remove VMD child device sanity check
  iommu/vt-d: Use pci_real_dma_dev() for mapping
  PCI: Introduce pci_real_dma_dev()
  x86/PCI: Expose VMD's pci_dev in struct pci_sysdata
  x86/PCI: Add to_pci_sysdata() helper
  PCI/AER: Initialize aer_fifo
  ...
2020-01-31 14:48:54 -08:00
Jon Derrick e3560ee4cf iommu/vt-d: Remove VMD child device sanity check
Remove the sanity check required for VMD child devices.  The new
pci_real_dma_dev() DMA alias mechanism places them in the same IOMMU group
as the VMD endpoint.  Assignment of the group would require assigning the
VMD endpoint, where unbinding the VMD endpoint removes the child device
domain from the hierarchy.

Link: https://lore.kernel.org/r/1579613871-301529-6-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
2020-01-24 14:58:45 -06:00
Jon Derrick 2b0140c696 iommu/vt-d: Use pci_real_dma_dev() for mapping
The PCI device may have a DMA requester on another bus, such as VMD
subdevices needing to use the VMD endpoint.  This case requires the real
DMA device for the IOMMU mapping, so use pci_real_dma_dev() to find that
device.

Link: https://lore.kernel.org/r/1579613871-301529-5-git-send-email-jonathan.derrick@intel.com
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
2020-01-24 14:58:33 -06:00
Joerg Roedel e3b5ee0cfb Merge branches 'iommu/fixes', 'arm/smmu', 'x86/amd', 'x86/vt-d' and 'core' into next 2020-01-24 15:39:39 +01:00
Lu Baolu b89b6605b8 iommu/vt-d: Unnecessary to handle default identity domain
The iommu default domain framework has been designed to take
care of setting identity default domain type. It's unnecessary
to handle this again in the VT-d driver. Hence, remove it.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-24 15:32:54 +01:00
Lu Baolu 9235cb13d7 iommu/vt-d: Allow devices with RMRRs to use identity domain
Since commit ea2447f700 ("intel-iommu: Prevent devices with
RMRRs from being placed into SI Domain"), the Intel IOMMU driver
doesn't allow any devices with RMRR locked to use the identity
domain. This was added to to fix the issue where the RMRR info
for devices being placed in and out of the identity domain gets
lost. This identity maps all RMRRs when setting up the identity
domain, so that devices with RMRRs could also use it.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-24 15:32:54 +01:00
Barret Rhoden ce4cc52b51 iommu/vt-d: Add RMRR base and end addresses sanity check
The VT-d spec specifies requirements for the RMRR entries base and
end (called 'Limit' in the docs) addresses.

This commit will cause the DMAR processing to mark the firmware as
tainted if any RMRR entries that do not meet these requirements.

Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-24 15:32:53 +01:00
Barret Rhoden f5a68bb075 iommu/vt-d: Mark firmware tainted if RMRR fails sanity check
RMRR entries describe memory regions that are DMA targets for devices
outside the kernel's control.

RMRR entries that fail the sanity check are pointing to regions of
memory that the firmware did not tell the kernel are reserved or
otherwise should not be used.

Instead of aborting DMAR processing, this commit marks the firmware
as tainted. These RMRRs will still be identity mapped, otherwise,
some devices, e.x. graphic devices, will not work during boot.

Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Fixes: f036c7fa0a ("iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-24 15:32:15 +01:00
Jerry Snitselaar bf708cfb2f iommu/vt-d: Call __dmar_remove_one_dev_info with valid pointer
It is possible for archdata.iommu to be set to
DEFER_DEVICE_DOMAIN_INFO or DUMMY_DEVICE_DOMAIN_INFO so check for
those values before calling __dmar_remove_one_dev_info. Without a
check it can result in a null pointer dereference. This has been seen
while booting a kdump kernel on an HP dl380 gen9.

Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: stable@vger.kernel.org # 5.3+
Cc: linux-kernel@vger.kernel.org
Fixes: ae23bfb68f ("iommu/vt-d: Detach domain before using a private one")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-24 15:23:50 +01:00
Jon Derrick f78947c409 iommu/vt-d: Unlink device if failed to add to group
If the device fails to be added to the group, make sure to unlink the
reference before returning.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Fixes: 39ab9555c2 ("iommu: Add sysfs bindings for struct iommu_device")
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 17:08:57 +01:00
Patrick Steinhardt 4a350a0ee5 iommu/vt-d: Fix adding non-PCI devices to Intel IOMMU
Starting with commit fa212a97f3 ("iommu/vt-d: Probe DMA-capable ACPI
name space devices"), we now probe DMA-capable ACPI name
space devices. On Dell XPS 13 9343, which has an Intel LPSS platform
device INTL9C60 enumerated via ACPI, this change leads to the following
warning:

    ------------[ cut here ]------------
    WARNING: CPU: 1 PID: 1 at pci_device_group+0x11a/0x130
    CPU: 1 PID: 1 Comm: swapper/0 Tainted: G                T 5.5.0-rc3+ #22
    Hardware name: Dell Inc. XPS 13 9343/0310JH, BIOS A20 06/06/2019
    RIP: 0010:pci_device_group+0x11a/0x130
    Code: f0 ff ff 48 85 c0 49 89 c4 75 c4 48 8d 74 24 10 48 89 ef e8 48 ef ff ff 48 85 c0 49 89 c4 75 af e8 db f7 ff ff 49 89 c4 eb a5 <0f> 0b 49 c7 c4 ea ff ff ff eb 9a e8 96 1e c7 ff 66 0f 1f 44 00 00
    RSP: 0000:ffffc0d6c0043cb0 EFLAGS: 00010202
    RAX: 0000000000000000 RBX: ffffa3d1d43dd810 RCX: 0000000000000000
    RDX: ffffa3d1d4fecf80 RSI: ffffa3d12943dcc0 RDI: ffffa3d1d43dd810
    RBP: ffffa3d1d43dd810 R08: 0000000000000000 R09: ffffa3d1d4c04a80
    R10: ffffa3d1d4c00880 R11: ffffa3d1d44ba000 R12: 0000000000000000
    R13: ffffa3d1d4383b80 R14: ffffa3d1d4c090d0 R15: ffffa3d1d4324530
    FS:  0000000000000000(0000) GS:ffffa3d1d6700000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000000 CR3: 000000000460a001 CR4: 00000000003606e0
    Call Trace:
     ? iommu_group_get_for_dev+0x81/0x1f0
     ? intel_iommu_add_device+0x61/0x170
     ? iommu_probe_device+0x43/0xd0
     ? intel_iommu_init+0x1fa2/0x2235
     ? pci_iommu_init+0x52/0xe7
     ? e820__memblock_setup+0x15c/0x15c
     ? do_one_initcall+0xcc/0x27e
     ? kernel_init_freeable+0x169/0x259
     ? rest_init+0x95/0x95
     ? kernel_init+0x5/0xeb
     ? ret_from_fork+0x35/0x40
    ---[ end trace 28473e7abc25b92c ]---
    DMAR: ACPI name space devices didn't probe correctly

The bug results from the fact that while we now enumerate ACPI devices,
we aren't able to handle any non-PCI device when generating the device
group. Fix the issue by implementing an Intel-specific callback that
returns `pci_device_group` only if the device is a PCI device.
Otherwise, it will return a generic device group.

Fixes: fa212a97f3 ("iommu/vt-d: Probe DMA-capable ACPI name space devices")
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Cc: stable@vger.kernel.org # v5.3+
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 17:08:51 +01:00
Lu Baolu e2726daea5 iommu/vt-d: debugfs: Add support to show page table internals
Export page table internals of the domain attached to each device.
Example of such dump on a Skylake machine:

$ sudo cat /sys/kernel/debug/iommu/intel/domain_translation_struct
[ ... ]
Device 0000:00:14.0 with pasid 0 @0x15f3d9000
IOVA_PFN                PML5E                   PML4E
0x000000008ced0 |       0x0000000000000000      0x000000015f3da003
0x000000008ced1 |       0x0000000000000000      0x000000015f3da003
0x000000008ced2 |       0x0000000000000000      0x000000015f3da003
0x000000008ced3 |       0x0000000000000000      0x000000015f3da003
0x000000008ced4 |       0x0000000000000000      0x000000015f3da003
0x000000008ced5 |       0x0000000000000000      0x000000015f3da003
0x000000008ced6 |       0x0000000000000000      0x000000015f3da003
0x000000008ced7 |       0x0000000000000000      0x000000015f3da003
0x000000008ced8 |       0x0000000000000000      0x000000015f3da003
0x000000008ced9 |       0x0000000000000000      0x000000015f3da003

PDPE                    PDE                     PTE
0x000000015f3db003      0x000000015f3dc003      0x000000008ced0003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced1003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced2003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced3003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced4003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced5003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced6003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced7003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced8003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced9003
[ ... ]

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 14:05:58 +01:00
Lu Baolu b802d070a5 iommu/vt-d: Use iova over first level
After we make all map/unmap paths support first level page table.
Let's turn it on if hardware supports scalable mode.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 14:05:58 +01:00
Lu Baolu 64229e8f37 iommu/vt-d: Update first level super page capability
First-level translation may map input addresses to 4-KByte pages,
2-MByte pages, or 1-GByte pages. Support for 4-KByte pages and
2-Mbyte pages are mandatory for first-level translation. Hardware
support for 1-GByte page is reported through the FL1GP field in
the Capability Register.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 14:05:58 +01:00
Lu Baolu cb8b892dce iommu/vt-d: Make first level IOVA canonical
First-level translation restricts the input-address to a canonical
address (i.e., address bits 63:N have the same value as address
bit [N-1], where N is 48-bits with 4-level paging and 57-bits with
5-level paging). (section 3.6 in the spec)

This makes first level IOVA canonical by using IOVA with bit [N-1]
always cleared.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 14:05:58 +01:00
Lu Baolu 33cd6e642d iommu/vt-d: Flush PASID-based iotlb for iova over first level
When software has changed first-level tables, it should invalidate
the affected IOTLB and the paging-structure-caches using the PASID-
based-IOTLB Invalidate Descriptor defined in spec 6.5.2.4.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 14:05:58 +01:00
Lu Baolu ddf09b6d43 iommu/vt-d: Setup pasid entries for iova over first level
Intel VT-d in scalable mode supports two types of page tables for
IOVA translation: first level and second level. The IOMMU driver
can choose one from both for IOVA translation according to the use
case. This sets up the pasid entry if a domain is selected to use
the first-level page table for iova translation.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 14:05:58 +01:00
Lu Baolu 2cd1311a26 iommu/vt-d: Add set domain DOMAIN_ATTR_NESTING attr
This adds the Intel VT-d specific callback of setting
DOMAIN_ATTR_NESTING domain attribution. It is necessary
to let the VT-d driver know that the domain represents
a virtual machine which requires the IOMMU hardware to
support nested translation mode. Return success if the
IOMMU hardware suports nested mode, otherwise failure.

Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 14:05:58 +01:00
Lu Baolu a1948f2e0a iommu/vt-d: Identify domains using first level page table
This checks whether a domain should use the first level page
table for map/unmap and marks it in the domain structure.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 14:05:57 +01:00
Lu Baolu 8e3391cfdc iommu/vt-d: Loose requirement for flush queue initializaton
Currently if flush queue initialization fails, we return error
or enforce the system-wide strict mode. These are unnecessary
because we always check the existence of a flush queue before
queuing any iova's for lazy flushing. Printing a informational
message is enough.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 14:05:57 +01:00
Lu Baolu 10f8008f0f iommu/vt-d: Avoid iova flush queue in strict mode
If Intel IOMMU strict mode is enabled by users, it's unnecessary
to create the iova flush queue.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 14:05:57 +01:00
Lu Baolu 984d03adc9 iommu/vt-d: trace: Extend map_sg trace event
Current map_sg stores trace message in a coarse manner. This
extends it so that more detailed messages could be traced.

The map_sg trace message looks like:

map_sg: dev=0000:00:17.0 [1/9] dev_addr=0xf8f90000 phys_addr=0x158051000 size=4096
map_sg: dev=0000:00:17.0 [2/9] dev_addr=0xf8f91000 phys_addr=0x15a858000 size=4096
map_sg: dev=0000:00:17.0 [3/9] dev_addr=0xf8f92000 phys_addr=0x15aa13000 size=4096
map_sg: dev=0000:00:17.0 [4/9] dev_addr=0xf8f93000 phys_addr=0x1570f1000 size=8192
map_sg: dev=0000:00:17.0 [5/9] dev_addr=0xf8f95000 phys_addr=0x15c6d0000 size=4096
map_sg: dev=0000:00:17.0 [6/9] dev_addr=0xf8f96000 phys_addr=0x157194000 size=4096
map_sg: dev=0000:00:17.0 [7/9] dev_addr=0xf8f97000 phys_addr=0x169552000 size=4096
map_sg: dev=0000:00:17.0 [8/9] dev_addr=0xf8f98000 phys_addr=0x169dde000 size=4096
map_sg: dev=0000:00:17.0 [9/9] dev_addr=0xf8f99000 phys_addr=0x148351000 size=4096

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 14:05:57 +01:00
Jacob Pan 59a623374d iommu/vt-d: Replace Intel specific PASID allocator with IOASID
Make use of generic IOASID code to manage PASID allocation,
free, and lookup. Replace Intel specific code.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 14:05:57 +01:00
Jacob Pan ff3dc6521f iommu/vt-d: Fix CPU and IOMMU SVM feature matching checks
Shared Virtual Memory(SVM) is based on a collective set of hardware
features detected at runtime. There are requirements for matching CPU
and IOMMU capabilities.

The current code checks CPU and IOMMU feature set for SVM support but
the result is never stored nor used. Therefore, SVM can still be used
even when these checks failed. The consequences can be:
1. CPU uses 5-level paging mode for virtual address of 57 bits, but
IOMMU can only support 4-level paging mode with 48 bits address for DMA.
2. 1GB page size is used by CPU but IOMMU does not support it. VT-d
unrecoverable faults may be generated.

The best solution to fix these problems is to prevent them in the first
place.

This patch consolidates code for checking PASID, CPU vs. IOMMU paging
mode compatibility, as well as provides specific error messages for
each failed checks. On sane hardware configurations, these error message
shall never appear in kernel log.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 14:05:57 +01:00
Lu Baolu 046182525d iommu/vt-d: Add Kconfig option to enable/disable scalable mode
This adds Kconfig option INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON
to make it easier for distributions to enable or disable the
Intel IOMMU scalable mode by default during kernel build.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07 14:05:57 +01:00
Thierry Reding 0ecdebb7da iommu: intel: Use generic_iommu_put_resv_regions()
Use the new standard function instead of open-coding it.

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-23 14:07:03 +01:00
Qian Cai 944c917539 iommu/iova: Silence warnings under memory pressure
When running heavy memory pressure workloads, this 5+ old system is
throwing endless warnings below because disk IO is too slow to recover
from swapping. Since the volume from alloc_iova_fast() could be large,
once it calls printk(), it will trigger disk IO (writing to the log
files) and pending softirqs which could cause an infinite loop and make
no progress for days by the ongoimng memory reclaim. This is the counter
part for Intel where the AMD part has already been merged. See the
commit 3d70889532 ("iommu/amd: Silence warnings under memory
pressure"). Since the allocation failure will be reported in
intel_alloc_iova(), so just call dev_err_once() there because even the
"ratelimited" is too much, and silence the one in alloc_iova_mem() to
avoid the expensive warn_alloc().

 hpsa 0000:03:00.0: DMAR: Allocating 1-page iova failed
 hpsa 0000:03:00.0: DMAR: Allocating 1-page iova failed
 hpsa 0000:03:00.0: DMAR: Allocating 1-page iova failed
 hpsa 0000:03:00.0: DMAR: Allocating 1-page iova failed
 hpsa 0000:03:00.0: DMAR: Allocating 1-page iova failed
 hpsa 0000:03:00.0: DMAR: Allocating 1-page iova failed
 hpsa 0000:03:00.0: DMAR: Allocating 1-page iova failed
 hpsa 0000:03:00.0: DMAR: Allocating 1-page iova failed
 slab_out_of_memory: 66 callbacks suppressed
 SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
   cache: iommu_iova, object size: 40, buffer size: 448, default order:
0, min order: 0
   node 0: slabs: 1822, objs: 16398, free: 0
   node 1: slabs: 2051, objs: 18459, free: 31
 SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
   cache: iommu_iova, object size: 40, buffer size: 448, default order:
0, min order: 0
   node 0: slabs: 1822, objs: 16398, free: 0
   node 1: slabs: 2051, objs: 18459, free: 31
 SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
   cache: iommu_iova, object size: 40, buffer size: 448, default order:
0, min order: 0
 SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
 SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
 SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
 SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
 SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
   cache: skbuff_head_cache, object size: 208, buffer size: 640, default
order: 0, min order: 0
   cache: skbuff_head_cache, object size: 208, buffer size: 640, default
order: 0, min order: 0
   cache: skbuff_head_cache, object size: 208, buffer size: 640, default
order: 0, min order: 0
   cache: skbuff_head_cache, object size: 208, buffer size: 640, default
order: 0, min order: 0
   node 0: slabs: 697, objs: 4182, free: 0
   node 0: slabs: 697, objs: 4182, free: 0
   node 0: slabs: 697, objs: 4182, free: 0
   node 0: slabs: 697, objs: 4182, free: 0
   node 1: slabs: 381, objs: 2286, free: 27
   node 1: slabs: 381, objs: 2286, free: 27
   node 1: slabs: 381, objs: 2286, free: 27
   node 1: slabs: 381, objs: 2286, free: 27
   node 0: slabs: 1822, objs: 16398, free: 0
   cache: skbuff_head_cache, object size: 208, buffer size: 640, default
order: 0, min order: 0
   node 1: slabs: 2051, objs: 18459, free: 31
   node 0: slabs: 697, objs: 4182, free: 0
 SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
   node 1: slabs: 381, objs: 2286, free: 27
   cache: skbuff_head_cache, object size: 208, buffer size: 640, default
order: 0, min order: 0
   node 0: slabs: 697, objs: 4182, free: 0
   node 1: slabs: 381, objs: 2286, free: 27
 hpsa 0000:03:00.0: DMAR: Allocating 1-page iova failed
 warn_alloc: 96 callbacks suppressed
 kworker/11:1H: page allocation failure: order:0,
mode:0xa20(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0-1
 CPU: 11 PID: 1642 Comm: kworker/11:1H Tainted: G    B
 Hardware name: HP ProLiant XL420 Gen9/ProLiant XL420 Gen9, BIOS U19
12/27/2015
 Workqueue: kblockd blk_mq_run_work_fn
 Call Trace:
  dump_stack+0xa0/0xea
  warn_alloc.cold.94+0x8a/0x12d
  __alloc_pages_slowpath+0x1750/0x1870
  __alloc_pages_nodemask+0x58a/0x710
  alloc_pages_current+0x9c/0x110
  alloc_slab_page+0xc9/0x760
  allocate_slab+0x48f/0x5d0
  new_slab+0x46/0x70
  ___slab_alloc+0x4ab/0x7b0
  __slab_alloc+0x43/0x70
  kmem_cache_alloc+0x2dd/0x450
 SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
  alloc_iova+0x33/0x210
   cache: skbuff_head_cache, object size: 208, buffer size: 640, default
order: 0, min order: 0
   node 0: slabs: 697, objs: 4182, free: 0
  alloc_iova_fast+0x62/0x3d1
   node 1: slabs: 381, objs: 2286, free: 27
  intel_alloc_iova+0xce/0xe0
  intel_map_sg+0xed/0x410
  scsi_dma_map+0xd7/0x160
  scsi_queue_rq+0xbf7/0x1310
  blk_mq_dispatch_rq_list+0x4d9/0xbc0
  blk_mq_sched_dispatch_requests+0x24a/0x300
  __blk_mq_run_hw_queue+0x156/0x230
  blk_mq_run_work_fn+0x3b/0x40
  process_one_work+0x579/0xb90
  worker_thread+0x63/0x5b0
  kthread+0x1e6/0x210
  ret_from_fork+0x3a/0x50
 Mem-Info:
 active_anon:2422723 inactive_anon:361971 isolated_anon:34403
  active_file:2285 inactive_file:1838 isolated_file:0
  unevictable:0 dirty:1 writeback:5 unstable:0
  slab_reclaimable:13972 slab_unreclaimable:453879
  mapped:2380 shmem:154 pagetables:6948 bounce:0
  free:19133 free_pcp:7363 free_cma:0

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-23 14:07:03 +01:00
Jerry Snitselaar cde9319e88 iommu/vt-d: Allocate reserved region for ISA with correct permission
Currently the reserved region for ISA is allocated with no
permissions. If a dma domain is being used, mapping this region will
fail. Set the permissions to DMA_PTE_READ|DMA_PTE_WRITE.

Cc: Joerg Roedel <jroedel@suse.de>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: stable@vger.kernel.org # v5.3+
Fixes: d850c2ee5f ("iommu/vt-d: Expose ISA direct mapping region via iommu_get_resv_regions")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-17 11:48:18 +01:00
Lu Baolu 75d1838539 iommu/vt-d: Fix dmar pte read access not set error
If the default DMA domain of a group doesn't fit a device, it
will still sit in the group but use a private identity domain.
When map/unmap/iova_to_phys come through iommu API, the driver
should still serve them, otherwise, other devices in the same
group will be impacted. Since identity domain has been mapped
with the whole available memory space and RMRRs, we don't need
to worry about the impact on it.

Link: https://www.spinics.net/lists/iommu/msg40416.html
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Fixes: 942067f1b6 ("iommu/vt-d: Identify default domains replaced with private")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-17 11:37:25 +01:00
Alex Williamson d8018a0e91 iommu/vt-d: Set ISA bridge reserved region as relaxable
Commit d850c2ee5f ("iommu/vt-d: Expose ISA direct mapping region via
iommu_get_resv_regions") created a direct-mapped reserved memory region
in order to replace the static identity mapping of the ISA address
space, where the latter was then removed in commit df4f3c603a
("iommu/vt-d: Remove static identity map code").  According to the
history of this code and the Kconfig option surrounding it, this direct
mapping exists for the benefit of legacy ISA drivers that are not
compatible with the DMA API.

In conjuntion with commit 9b77e5c798 ("vfio/type1: check dma map
request is within a valid iova range") this change introduced a
regression where the vfio IOMMU backend enforces reserved memory regions
per IOMMU group, preventing userspace from creating IOMMU mappings
conflicting with prescribed reserved regions.  A necessary prerequisite
for the vfio change was the introduction of "relaxable" direct mappings
introduced by commit adfd373820 ("iommu: Introduce
IOMMU_RESV_DIRECT_RELAXABLE reserved memory regions").  These relaxable
direct mappings provide the same identity mapping support in the default
domain, but also indicate that the reservation is software imposed and
may be relaxed under some conditions, such as device assignment.

Convert the ISA bridge direct-mapped reserved region to relaxable to
reflect that the restriction is self imposed and need not be enforced
by drivers such as vfio.

Fixes: 1c5c59fbad ("iommu/vt-d: Differentiate relaxable and non relaxable RMRRs")
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/linux-iommu/20191211082304.2d4fab45@x1.home
Reported-by: cprt <cprt@protonmail.com>
Tested-by: cprt <cprt@protonmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-17 11:20:28 +01:00
Joerg Roedel 9b3a713fee Merge branches 'iommu/fixes', 'arm/qcom', 'arm/renesas', 'arm/rockchip', 'arm/mediatek', 'arm/tegra', 'arm/smmu', 'x86/amd', 'x86/vt-d', 'virtio' and 'core' into next 2019-11-12 17:11:25 +01:00
Deepa Dinamani 6c3a44ed3c iommu/vt-d: Turn off translations at shutdown
The intel-iommu driver assumes that the iommu state is
cleaned up at the start of the new kernel.
But, when we try to kexec boot something other than the
Linux kernel, the cleanup cannot be relied upon.
Hence, cleanup before we go down for reboot.

Keeping the cleanup at initialization also, in case BIOS
leaves the IOMMU enabled.

I considered turning off iommu only during kexec reboot, but a clean
shutdown seems always a good idea. But if someone wants to make it
conditional, such as VMM live update, we can do that.  There doesn't
seem to be such a condition at this time.

Tested that before, the info message
'DMAR: Translation was enabled for <iommu> but we are not in kdump mode'
would be reported for each iommu. The message will not appear when the
DMA-remapping is not enabled on entry to the kernel.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11 16:07:13 +01:00
Yian Chen f036c7fa0a iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved
VT-d RMRR (Reserved Memory Region Reporting) regions are reserved
for device use only and should not be part of allocable memory pool of OS.

BIOS e820_table reports complete memory map to OS, including OS usable
memory ranges and BIOS reserved memory ranges etc.

x86 BIOS may not be trusted to include RMRR regions as reserved type
of memory in its e820 memory map, hence validate every RMRR entry
with the e820 memory map to make sure the RMRR regions will not be
used by OS for any other purposes.

ia64 EFI is working fine so implement RMRR validation as a dummy function

Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Yian Chen <yian.chen@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-11-11 16:06:07 +01:00
John Donnelly 160c63f909 iommu/vt-d: Fix panic after kexec -p for kdump
This cures a panic on restart after a kexec operation on 5.3 and 5.4
kernels.

The underlying state of the iommu registers (iommu->flags &
VTD_FLAG_TRANS_PRE_ENABLED) on a restart results in a domain being marked as
"DEFER_DEVICE_DOMAIN_INFO" that produces an Oops in identity_mapping().

[   43.654737] BUG: kernel NULL pointer dereference, address:
0000000000000056
[   43.655720] #PF: supervisor read access in kernel mode
[   43.655720] #PF: error_code(0x0000) - not-present page
[   43.655720] PGD 0 P4D 0
[   43.655720] Oops: 0000 [#1] SMP PTI
[   43.655720] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.3.2-1940.el8uek.x86_64 #1
[   43.655720] Hardware name: Oracle Corporation ORACLE SERVER
X5-2/ASM,MOTHERBOARD,1U, BIOS 30140300 09/20/2018
[   43.655720] RIP: 0010:iommu_need_mapping+0x29/0xd0
[   43.655720] Code: 00 0f 1f 44 00 00 48 8b 97 70 02 00 00 48 83 fa ff
74 53 48 8d 4a ff b8 01 00 00 00 48 83 f9 fd 76 01 c3 48 8b 35 7f 58 e0
01 <48> 39 72 58 75 f2 55 48 89 e5 41 54 53 48 8b 87 28 02 00 00 4c 8b
[   43.655720] RSP: 0018:ffffc9000001b9b0 EFLAGS: 00010246
[   43.655720] RAX: 0000000000000001 RBX: 0000000000001000 RCX:
fffffffffffffffd
[   43.655720] RDX: fffffffffffffffe RSI: ffff8880719b8000 RDI:
ffff8880477460b0
[   43.655720] RBP: ffffc9000001b9e8 R08: 0000000000000000 R09:
ffff888047c01700
[   43.655720] R10: 00002194036fc692 R11: 0000000000000000 R12:
0000000000000000
[   43.655720] R13: ffff8880477460b0 R14: 0000000000000cc0 R15:
ffff888072d2b558
[   43.655720] FS:  0000000000000000(0000) GS:ffff888071c00000(0000)
knlGS:0000000000000000
[   43.655720] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   43.655720] CR2: 0000000000000056 CR3: 000000007440a002 CR4:
00000000001606b0
[   43.655720] Call Trace:
[   43.655720]  ? intel_alloc_coherent+0x2a/0x180
[   43.655720]  ? __schedule+0x2c2/0x650
[   43.655720]  dma_alloc_attrs+0x8c/0xd0
[   43.655720]  dma_pool_alloc+0xdf/0x200
[   43.655720]  ehci_qh_alloc+0x58/0x130
[   43.655720]  ehci_setup+0x287/0x7ba
[   43.655720]  ? _dev_info+0x6c/0x83
[   43.655720]  ehci_pci_setup+0x91/0x436
[   43.655720]  usb_add_hcd.cold.48+0x1d4/0x754
[   43.655720]  usb_hcd_pci_probe+0x2bc/0x3f0
[   43.655720]  ehci_pci_probe+0x39/0x40
[   43.655720]  local_pci_probe+0x47/0x80
[   43.655720]  pci_device_probe+0xff/0x1b0
[   43.655720]  really_probe+0xf5/0x3a0
[   43.655720]  driver_probe_device+0xbb/0x100
[   43.655720]  device_driver_attach+0x58/0x60
[   43.655720]  __driver_attach+0x8f/0x150
[   43.655720]  ? device_driver_attach+0x60/0x60
[   43.655720]  bus_for_each_dev+0x74/0xb0
[   43.655720]  driver_attach+0x1e/0x20
[   43.655720]  bus_add_driver+0x151/0x1f0
[   43.655720]  ? ehci_hcd_init+0xb2/0xb2
[   43.655720]  ? do_early_param+0x95/0x95
[   43.655720]  driver_register+0x70/0xc0
[   43.655720]  ? ehci_hcd_init+0xb2/0xb2
[   43.655720]  __pci_register_driver+0x57/0x60
[   43.655720]  ehci_pci_init+0x6a/0x6c
[   43.655720]  do_one_initcall+0x4a/0x1fa
[   43.655720]  ? do_early_param+0x95/0x95
[   43.655720]  kernel_init_freeable+0x1bd/0x262
[   43.655720]  ? rest_init+0xb0/0xb0
[   43.655720]  kernel_init+0xe/0x110
[   43.655720]  ret_from_fork+0x24/0x50

Fixes: 8af46c784e ("iommu/vt-d: Implement is_attach_deferred iommu ops entry")
Cc: stable@vger.kernel.org # v5.3+

Signed-off-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-30 10:30:22 +01:00
Arvind Sankar 9c24eaf81c iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMU
We must return a mask covering the full physical RAM when bypassing the
IOMMU mapping. Also, in iommu_need_mapping, we need to check using
dma_direct_get_required_mask to ensure that the device's dma_mask can
cover physical RAM before deciding to bypass IOMMU mapping.

Based on an earlier patch from Christoph Hellwig.

Fixes: 249baa5479 ("dma-mapping: provide a better default ->get_required_mask")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-10-18 17:19:20 +02:00
Lu Baolu 1ee0186b9a iommu/vt-d: Refactor find_domain() helper
Current find_domain() helper checks and does the deferred domain
attachment and return the domain in use. This isn't always the
use case for the callers. Some callers only want to retrieve the
current domain in use.

This refactors find_domain() into two helpers: 1) find_domain()
only returns the domain in use; 2) deferred_attach_domain() does
the deferred domain attachment if required and return the domain
in use.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-15 11:52:25 +02:00
Tom Murphy 781ca2de89 iommu: Add gfp parameter to iommu_ops::map
Add a gfp_t parameter to the iommu_ops::map function.
Remove the needless locking in the AMD iommu driver.

The iommu_ops::map function (or the iommu_map function which calls it)
was always supposed to be sleepable (according to Joerg's comment in
this thread: https://lore.kernel.org/patchwork/patch/977520/ ) and so
should probably have had a "might_sleep()" since it was written. However
currently the dma-iommu api can call iommu_map in an atomic context,
which it shouldn't do. This doesn't cause any problems because any iommu
driver which uses the dma-iommu api uses gfp_atomic in it's
iommu_ops::map function. But doing this wastes the memory allocators
atomic pools.

Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-10-15 11:31:04 +02:00
Linus Torvalds 671df18953 dma-mapping updates for 5.4:
- add dma-mapping and block layer helpers to take care of IOMMU
    merging for mmc plus subsequent fixups (Yoshihiro Shimoda)
  - rework handling of the pgprot bits for remapping (me)
  - take care of the dma direct infrastructure for swiotlb-xen (me)
  - improve the dma noncoherent remapping infrastructure (me)
  - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me)
  - cleanup mmaping of coherent DMA allocations (me)
  - various misc cleanups (Andy Shevchenko, me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl2CSucLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPfrhAAgXZA/EdFPvkkCoDrmgtf3XkudX9gajeCd9g4NZy6
 ZBQElTVvm4S0sQj7IXgALnMumDMbbTibW5SQLX5GwQDe+XXBpZ8ajpAnJAXc8a5T
 qaFQ4SInr4CgBZf9nZKDkbSBZ1Tu3AQm1c0QI8riRCkrVTuX4L06xpCef4Yh4mgO
 rwWEjIioYpQiKZMmu98riXh3ZNfFG3mVJRhKt8B6XJbBgnUnjDOPYGgaUwp6CU20
 tFBKL2GaaV0vdLJ5wYhIGXT4DJ8tp9T5n3IYGZv1Ux889RaZEHlCrMxzelYeDbCT
 KhZbhcSECGnddsh73t/UX7/KhytuqnfKa9n+Xo6AWuA47xO4c36quOOcTk9M0vE5
 TfGDmewgL6WIv4lzokpRn5EkfDhyL33j8eYJrJ8e0ldcOhSQIFk4ciXnf2stWi6O
 JrlzzzSid+zXxu48iTfoPdnMr7psTpiMvvRvKfEeMp2FX9Fg6EdMzJYLTEl+COHB
 0WwNacZmY3P01+b5EZXEgqKEZevIIdmPKbyM9rPtTjz8BjBwkABHTpN3fWbVBf7/
 Ax6OPYyW40xp1fnJuzn89m3pdOxn88FpDdOaeLz892Zd+Qpnro1ayulnFspVtqGM
 mGbzA9whILvXNRpWBSQrvr2IjqMRjbBxX3BVACl3MMpOChgkpp5iANNfSDjCftSF
 Zu8=
 =/wGv
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - add dma-mapping and block layer helpers to take care of IOMMU merging
   for mmc plus subsequent fixups (Yoshihiro Shimoda)

 - rework handling of the pgprot bits for remapping (me)

 - take care of the dma direct infrastructure for swiotlb-xen (me)

 - improve the dma noncoherent remapping infrastructure (me)

 - better defaults for ->mmap, ->get_sgtable and ->get_required_mask
   (me)

 - cleanup mmaping of coherent DMA allocations (me)

 - various misc cleanups (Andy Shevchenko, me)

* tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits)
  mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE
  mmc: queue: Fix bigger segments usage
  arm64: use asm-generic/dma-mapping.h
  swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page
  swiotlb-xen: simplify cache maintainance
  swiotlb-xen: use the same foreign page check everywhere
  swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable
  xen: remove the exports for xen_{create,destroy}_contiguous_region
  xen/arm: remove xen_dma_ops
  xen/arm: simplify dma_cache_maint
  xen/arm: use dev_is_dma_coherent
  xen/arm: consolidate page-coherent.h
  xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance
  arm: remove wrappers for the generic dma remap helpers
  dma-mapping: introduce a dma_common_find_pages helper
  dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
  vmalloc: lift the arm flag for coherent mappings to common code
  dma-mapping: provide a better default ->get_required_mask
  dma-mapping: remove the dma_declare_coherent_memory export
  remoteproc: don't allow modular build
  ...
2019-09-19 13:27:23 -07:00