Граф коммитов

315 Коммитов

Автор SHA1 Сообщение Дата
Zhang Yiqun acd4045db6 crypto: testmgr - add diff-splits of src/dst into default cipher config
This type of request is often happened in AF_ALG cases.
So add this vector in default cipher config array.

Signed-off-by: Zhang Yiqun <zhangyiqun@phytium.com.cn>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-02-10 17:20:19 +08:00
Vladis Dronov 1b4744e107 crypto: testmgr - disallow certain DRBG hash functions in FIPS mode
According to FIPS 140-3 IG, section D.R "Hash Functions Acceptable for
Use in the SP 800-90A DRBGs", modules certified after May 16th, 2023
must not support the use of: SHA-224, SHA-384, SHA512-224, SHA512-256,
SHA3-224, SHA3-384. Disallow HMAC and HASH DRBGs using SHA-384 in FIPS
mode.

Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-27 18:58:09 +08:00
Nicolai Stange c27b2d2012 crypto: testmgr - allow ecdsa-nist-p256 and -p384 in FIPS mode
The kernel provides implementations of the NIST ECDSA signature
verification primitives. For key sizes of 256 and 384 bits respectively
they are approved and can be enabled in FIPS mode. Do so.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-06 17:15:47 +08:00
Nicolai Stange 2912eb9b17 crypto: testmgr - disallow plain ghash in FIPS mode
ghash may be used only as part of the gcm(aes) construction in FIPS
mode. Since commit d6097b8d5d ("crypto: api - allow algs only in specific
constructions in FIPS mode") there's support for using spawns which by
itself are marked as non-approved from approved template instantiations.
So simply mark plain ghash as non-approved in testmgr to block any attempts
of direct instantiations in FIPS mode.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-06 17:15:47 +08:00
Nicolai Stange 1ce94a8c2c crypto: testmgr - disallow plain cbcmac(aes) in FIPS mode
cbcmac(aes) may be used only as part of the ccm(aes) construction in FIPS
mode. Since commit d6097b8d5d ("crypto: api - allow algs only in specific
constructions in FIPS mode") there's support for using spawns which by
itself are marked as non-approved from approved template instantiations.
So simply mark plain cbcmac(aes) as non-approved in testmgr to block any
attempts of direct instantiations in FIPS mode.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-06 17:15:47 +08:00
Linus Torvalds 64e7003c6b This update includes the following changes:
API:
 
 - Optimise away self-test overhead when they are disabled.
 - Support symmetric encryption via keyring keys in af_alg.
 - Flip hwrng default_quality, the default is now maximum entropy.
 
 Algorithms:
 
 - Add library version of aesgcm.
 - CFI fixes for assembly code.
 - Add arm/arm64 accelerated versions of sm3/sm4.
 
 Drivers:
 
 - Remove assumption on arm64 that kmalloc is DMA-aligned.
 - Fix selftest failures in rockchip.
 - Add support for RK3328/RK3399 in rockchip.
 - Add deflate support in qat.
 - Merge ux500 into stm32.
 - Add support for TEE for PCI ID 0x14CA in ccp.
 - Add mt7986 support in mtk.
 - Add MaxLinear platform support in inside-secure.
 - Add NPCM8XX support in npcm.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmOZhNQACgkQxycdCkmx
 i6edOQ/+IHYe2Z+fLsMGs0qgTVaEV33O0crTRl/PMkfBJai57grz6x/G9QrkwGHS
 084u4RmwhVrE7Z/pxvey48m0lHMw3H/ElLTRl5LV1zE2OtGgr4VV63wtqthu1QS1
 KblVnjb52DhFhvF1O1IrK9lxyX0lByOiARFVdyZR6+Rb66Xfq8rqk5t8U8mmTUFz
 ds9S2Un4HajgtjNEyI78DOX8o4wVST8tltQs0eVii6T9AeXgSgX37ytD7Xtg/zrz
 /p61KFgKBQkRT7EEGD6xgNrND0vNAp2w98ZTTRXTZI8+Y0aTUcTYya7cXOLBt9bQ
 rA7z9sNKvmwJijTMV6O9eqRGcYfzc2G4qfMhlQqj/P2pjLnEZXdvFNHTTbclR76h
 2UFlZXPDQVQukvnNNnB6bmIvv6DsM+jmGH0pK5BnBJXnD5SOZh1RqjJxw0Kj6QCM
 VxpKDvfStux2Guh6mz1lJna/S44qKy/sVYkWUawcmE4RF2+GfNayM1GUpEUofndE
 vz1yZdgLPETSh5QzKrjFkUAnqo/AsAdc5Qxroz9DRz1BCC0GCuIxjUG8ScTWgcth
 R/reQDczBckCNpPxrWPHHYoVXnAMwEFySfcjZyuCoMO6t6qVUvcjRShCyKwO/JPl
 9YREdRmq0swwIB9cFIrEoWrzc3wjjBtsltDFlkKsa9c92LXoW+g=
 =OpWt
 -----END PGP SIGNATURE-----

Merge tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto updates from Herbert Xu:
 "API:
   - Optimise away self-test overhead when they are disabled
   - Support symmetric encryption via keyring keys in af_alg
   - Flip hwrng default_quality, the default is now maximum entropy

  Algorithms:
   - Add library version of aesgcm
   - CFI fixes for assembly code
   - Add arm/arm64 accelerated versions of sm3/sm4

  Drivers:
   - Remove assumption on arm64 that kmalloc is DMA-aligned
   - Fix selftest failures in rockchip
   - Add support for RK3328/RK3399 in rockchip
   - Add deflate support in qat
   - Merge ux500 into stm32
   - Add support for TEE for PCI ID 0x14CA in ccp
   - Add mt7986 support in mtk
   - Add MaxLinear platform support in inside-secure
   - Add NPCM8XX support in npcm"

* tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
  crypto: ux500/cryp - delete driver
  crypto: stm32/cryp - enable for use with Ux500
  crypto: stm32 - enable drivers to be used on Ux500
  dt-bindings: crypto: Let STM32 define Ux500 CRYP
  hwrng: geode - Fix PCI device refcount leak
  hwrng: amd - Fix PCI device refcount leak
  crypto: qce - Set DMA alignment explicitly
  crypto: octeontx2 - Set DMA alignment explicitly
  crypto: octeontx - Set DMA alignment explicitly
  crypto: keembay - Set DMA alignment explicitly
  crypto: safexcel - Set DMA alignment explicitly
  crypto: hisilicon/hpre - Set DMA alignment explicitly
  crypto: chelsio - Set DMA alignment explicitly
  crypto: ccree - Set DMA alignment explicitly
  crypto: ccp - Set DMA alignment explicitly
  crypto: cavium - Set DMA alignment explicitly
  crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
  crypto: arm64/ghash-ce - use frame_push/pop macros consistently
  crypto: arm64/crct10dif - use frame_push/pop macros consistently
  crypto: arm64/aes-modes - use frame_push/pop macros consistently
  ...
2022-12-14 12:31:09 -08:00
Linus Torvalds 75f4d9af8b iov_iter work; most of that is about getting rid of
direction misannotations and (hopefully) preventing
 more of the same for the future.
 
 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 -----BEGIN PGP SIGNATURE-----
 
 iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
 65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
 MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
 =bcvF
 -----END PGP SIGNATURE-----

Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull iov_iter updates from Al Viro:
 "iov_iter work; most of that is about getting rid of direction
  misannotations and (hopefully) preventing more of the same for the
  future"

* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  use less confusing names for iov_iter direction initializers
  iov_iter: saner checks for attempt to copy to/from iterator
  [xen] fix "direction" argument of iov_iter_kvec()
  [vhost] fix 'direction' argument of iov_iter_{init,bvec}()
  [target] fix iov_iter_bvec() "direction" argument
  [s390] memcpy_real(): WRITE is "data source", not destination...
  [s390] zcore: WRITE is "data source", not destination...
  [infiniband] READ is "data destination", not source...
  [fsi] WRITE is "data source", not destination...
  [s390] copy_oldmem_kernel() - WRITE is "data source", not destination
  csum_and_copy_to_iter(): handle ITER_DISCARD
  get rid of unlikely() on page_copy_sane() calls
2022-12-12 18:29:54 -08:00
Al Viro de4eda9de2 use less confusing names for iov_iter direction initializers
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.

Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-11-25 13:01:55 -05:00
Jason A. Donenfeld e8a533cbeb treewide: use get_random_u32_inclusive() when possible
These cases were done with this Coccinelle:

@@
expression H;
expression L;
@@
- (get_random_u32_below(H) + L)
+ get_random_u32_inclusive(L, H + L - 1)

@@
expression H;
expression L;
expression E;
@@
  get_random_u32_inclusive(L,
  H
- + E
- - E
  )

@@
expression H;
expression L;
expression E;
@@
  get_random_u32_inclusive(L,
  H
- - E
- + E
  )

@@
expression H;
expression L;
expression E;
expression F;
@@
  get_random_u32_inclusive(L,
  H
- - E
  + F
- + E
  )

@@
expression H;
expression L;
expression E;
expression F;
@@
  get_random_u32_inclusive(L,
  H
- + E
  + F
- - E
  )

And then subsequently cleaned up by hand, with several automatic cases
rejected if it didn't make sense contextually.

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-18 02:18:02 +01:00
Jason A. Donenfeld 8032bf1233 treewide: use get_random_u32_below() instead of deprecated function
This is a simple mechanical transformation done by:

@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
  (E)

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Reviewed-by: SeongJae Park <sj@kernel.org> # for damon
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-18 02:15:15 +01:00
Tianjia Zhang c24ee936c7 crypto: testmgr - add SM4 cts-cbc/xts/xcbc test vectors
This patch newly adds the test vectors of CTS-CBC/XTS/XCBC modes of
the SM4 algorithm, and also added some test vectors for SM4 GCM/CCM.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-04 17:34:21 +08:00
Jason A. Donenfeld 7e3cf0843f treewide: use get_random_{u8,u16}() when possible, part 1
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value,
simply use the get_random_{u8,u16}() functions, which are faster than
wasting the additional bytes from a 32-bit value. This was done
mechanically with this coccinelle script:

@@
expression E;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
typedef __be16;
typedef __le16;
typedef u8;
@@
(
- (get_random_u32() & 0xffff)
+ get_random_u16()
|
- (get_random_u32() & 0xff)
+ get_random_u8()
|
- (get_random_u32() % 65536)
+ get_random_u16()
|
- (get_random_u32() % 256)
+ get_random_u8()
|
- (get_random_u32() >> 16)
+ get_random_u16()
|
- (get_random_u32() >> 24)
+ get_random_u8()
|
- (u16)get_random_u32()
+ get_random_u16()
|
- (u8)get_random_u32()
+ get_random_u8()
|
- (__be16)get_random_u32()
+ (__be16)get_random_u16()
|
- (__le16)get_random_u32()
+ (__le16)get_random_u16()
|
- prandom_u32_max(65536)
+ get_random_u16()
|
- prandom_u32_max(256)
+ get_random_u8()
|
- E->inet_id = get_random_u32()
+ E->inet_id = get_random_u16()
)

@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
identifier v;
@@
- u16 v = get_random_u32();
+ u16 v = get_random_u16();

@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u8;
identifier v;
@@
- u8 v = get_random_u32();
+ u8 v = get_random_u8();

@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
u16 v;
@@
-  v = get_random_u32();
+  v = get_random_u16();

@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u8;
u8 v;
@@
-  v = get_random_u32();
+  v = get_random_u8();

// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@

        ((T)get_random_u32()@p & (LITERAL))

// Examine limits
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@

value = None
if literal.startswith('0x'):
        value = int(literal, 16)
elif literal[0] in '123456789':
        value = int(literal, 10)
if value is None:
        print("I don't know how to handle %s" % (literal))
        cocci.include_match(False)
elif value < 256:
        coccinelle.RESULT = cocci.make_ident("get_random_u8")
elif value < 65536:
        coccinelle.RESULT = cocci.make_ident("get_random_u16")
else:
        print("Skipping large mask of %s" % (literal))
        cocci.include_match(False)

// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
identifier add_one.RESULT;
identifier FUNC;
@@

-       (FUNC()@p & (LITERAL))
+       (RESULT() & LITERAL)

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11 17:42:58 -06:00
Jason A. Donenfeld 81895a65ec treewide: use prandom_u32_max() when possible, part 1
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:

@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)

@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@

-       RAND = get_random_u32();
        ... when != RAND
-       RAND %= (E);
+       RAND = prandom_u32_max(E);

// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@

        ((T)get_random_u32()@p & (LITERAL))

// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@

value = None
if literal.startswith('0x'):
        value = int(literal, 16)
elif literal[0] in '123456789':
        value = int(literal, 10)
if value is None:
        print("I don't know how to handle %s" % (literal))
        cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
        print("Skipping 0x%x for cleanup elsewhere" % (value))
        cocci.include_match(False)
elif value & (value + 1) != 0:
        print("Skipping 0x%x because it's not a power of two minus one" % (value))
        cocci.include_match(False)
elif literal.startswith('0x'):
        coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
        coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))

// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@

-       (FUNC()@p & (LITERAL))
+       prandom_u32_max(RESULT)

@collapse_ret@
type T;
identifier VAR;
expression E;
@@

 {
-       T VAR;
-       VAR = (E);
-       return VAR;
+       return E;
 }

@drop_var@
type T;
identifier VAR;
@@

 {
-       T VAR;
        ... when != VAR
 }

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11 17:42:55 -06:00
Lucas Segarra Fernandez 442f06067f crypto: testmgr - fix indentation for test_acomp() args
Set right indentation for test_acomp().

Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-02 18:38:06 +08:00
Robert Elliott a76bd86a85 crypto: testmgr - don't generate WARN for missing modules
This userspace command:
    modprobe tcrypt
or
    modprobe tcrypt mode=0

runs all the tcrypt test cases numbered <200 (i.e., all the
test cases calling tcrypt_test() and returning return values).

Tests are sparsely numbered from 0 to 1000. For example:
    modprobe tcrypt mode=12
tests sha512, and
    modprobe tcrypt mode=152
tests rfc4543(gcm(aes))) - AES-GCM as GMAC

The test manager generates WARNING crashdumps every time it attempts
a test using an algorithm that is not available (not built-in to the
kernel or available as a module):

    alg: skcipher: failed to allocate transform for ecb(arc4): -2
    ------------[ cut here ]-----------
    alg: self-tests for ecb(arc4) (ecb(arc4)) failed (rc=-2)
    WARNING: CPU: 9 PID: 4618 at crypto/testmgr.c:5777
alg_test+0x30b/0x510
    [50 more lines....]

    ---[ end trace 0000000000000000 ]---

If the kernel is compiled with CRYPTO_USER_API_ENABLE_OBSOLETE
disabled (the default), then these algorithms are not compiled into
the kernel or made into modules and trigger WARNINGs:
    arc4 tea xtea khazad anubis xeta seed

Additionally, any other algorithms that are not enabled in .config
will generate WARNINGs. In RHEL 9.0, for example, the default
selection of algorithms leads to 16 WARNING dumps.

One attempt to fix this was by modifying tcrypt_test() to check
crypto_has_alg() and immediately return 0 if crypto_has_alg() fails,
rather than proceed and return a non-zero error value that causes
the caller (alg_test() in crypto/testmgr.c) to invoke WARN().
That knocks out too many algorithms, though; some combinations
like ctr(des3_ede) would work.

Instead, change the condition on the WARN to ignore a return
value is ENOENT, which is the value returned when the algorithm
or combination of algorithms doesn't exist. Add a pr_warn to
communicate that information in case the WARN is skipped.

This approach allows algorithm tests to work that are combinations,
not provided by one driver, like ctr(blowfish).

Result - no more WARNINGs:
modprobe tcrypt
[  115.541765] tcrypt: testing md5
[  115.556415] tcrypt: testing sha1
[  115.570463] tcrypt: testing ecb(des)
[  115.585303] cryptomgr: alg: skcipher: failed to allocate transform for ecb(des): -2
[  115.593037] cryptomgr: alg: self-tests for ecb(des) using ecb(des) failed (rc=-2)
[  115.593038] tcrypt: testing cbc(des)
[  115.610641] cryptomgr: alg: skcipher: failed to allocate transform for cbc(des): -2
[  115.618359] cryptomgr: alg: self-tests for cbc(des) using cbc(des) failed (rc=-2)
...

Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19 18:39:39 +08:00
Lucas Segarra Fernandez 5a4c293666 crypto: testmgr - extend acomp tests for NULL destination buffer
Acomp API supports NULL destination buffer for compression
and decompression requests. In such cases allocation is
performed by API.

Add test cases for crypto_acomp_compress() and crypto_acomp_decompress()
with dst buffer allocated by API.

Tests will only run if CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y.

Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19 18:39:37 +08:00
Taehee Yoo 01ce31de70 crypto: testmgr - add ARIA testmgr tests
It contains ARIA ecb(aria), cbc(aria), cfb(aria), ctr(aria), and gcm(aria).
ecb testvector is from RFC standard.
cbc, cfb, and ctr testvectors are from KISA[1], who developed ARIA
algorithm.
gcm(aria) is from openssl test vector.

[1] https://seed.kisa.or.kr/kisa/kcmvp/EgovVerification.do (Korean)

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-15 16:43:20 +08:00
Jason A. Donenfeld 2d16803c56 crypto: blake2s - remove shash module
BLAKE2s has no currently known use as an shash. Just remove all of this
unnecessary plumbing. Removing this shash was something we talked about
back when we were making BLAKE2s a built-in, but I simply never got
around to doing it. So this completes that project.

Importantly, this fixs a bug in which the lib code depends on
crypto_simd_disabled_for_test, causing linker errors.

Also add more alignment tests to the selftests and compare SIMD and
non-SIMD compression functions, to make up for what we lose from
testmgr.c.

Reported-by: gaochao <gaochao49@huawei.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 6048fdcc5f ("lib/crypto: blake2s: include as built-in")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-10 16:43:49 +08:00
Nathan Huckleberry 7ff554ced7 crypto: hctr2 - Add HCTR2 support
Add support for HCTR2 as a template.  HCTR2 is a length-preserving
encryption mode that is efficient on processors with instructions to
accelerate AES and carryless multiplication, e.g. x86 processors with
AES-NI and CLMUL, and ARM processors with the ARMv8 Crypto Extensions.

As a length-preserving encryption mode, HCTR2 is suitable for
applications such as storage encryption where ciphertext expansion is
not possible, and thus authenticated encryption cannot be used.
Currently, such applications usually use XTS, or in some cases Adiantum.
XTS has the disadvantage that it is a narrow-block mode: a bitflip will
only change 16 bytes in the resulting ciphertext or plaintext.  This
reveals more information to an attacker than necessary.

HCTR2 is a wide-block mode, so it provides a stronger security property:
a bitflip will change the entire message.  HCTR2 is somewhat similar to
Adiantum, which is also a wide-block mode.  However, HCTR2 is designed
to take advantage of existing crypto instructions, while Adiantum
targets devices without such hardware support.  Adiantum is also
designed with longer messages in mind, while HCTR2 is designed to be
efficient even on short messages.

HCTR2 requires POLYVAL and XCTR as components.  More information on
HCTR2 can be found here: "Length-preserving encryption with HCTR2":
https://eprint.iacr.org/2021/1441.pdf

Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-10 16:40:17 +08:00
Nathan Huckleberry f3c923a09c crypto: polyval - Add POLYVAL support
Add support for POLYVAL, an ε-Δ-universal hash function similar to
GHASH.  This patch only uses POLYVAL as a component to implement HCTR2
mode.  It should be noted that POLYVAL was originally specified for use
in AES-GCM-SIV (RFC 8452), but the kernel does not currently support
this mode.

POLYVAL is implemented as an shash algorithm.  The implementation is
modified from ghash-generic.c.

For more information on POLYVAL see:
Length-preserving encryption with HCTR2:
  https://eprint.iacr.org/2021/1441.pdf
AES-GCM-SIV: Nonce Misuse-Resistant Authenticated Encryption:
  https://datatracker.ietf.org/doc/html/rfc8452

Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-10 16:40:17 +08:00
Nathan Huckleberry 17fee07a2a crypto: xctr - Add XCTR support
Add a generic implementation of XCTR mode as a template.  XCTR is a
blockcipher mode similar to CTR mode.  XCTR uses XORs and little-endian
addition rather than big-endian arithmetic which has two advantages:  It
is slightly faster on little-endian CPUs and it is less likely to be
implemented incorrect since integer overflows are not possible on
practical input sizes.  XCTR is used as a component to implement HCTR2.

More information on XCTR mode can be found in the HCTR2 paper:
https://eprint.iacr.org/2021/1441.pdf

Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-10 16:40:16 +08:00
Eric Biggers f17f9e9069 crypto: testmgr - test in-place en/decryption with two sglists
As was established in the thread
https://lore.kernel.org/linux-crypto/20220223080400.139367-1-gilad@benyossef.com/T/#u,
many crypto API users doing in-place en/decryption don't use the same
scatterlist pointers for the source and destination, but rather use
separate scatterlists that point to the same memory.  This case isn't
tested by the self-tests, resulting in bugs.

This is the natural usage of the crypto API in some cases, so requiring
API users to avoid this usage is not reasonable.

Therefore, update the self-tests to start testing this case.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-04-08 16:25:19 +08:00
Linus Torvalds 3f7282139f for-5.18/64bit-pi-2022-03-25
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmI92rYQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpkAJD/9PvRN61YnNRjjAiHgslwMc2fy9lkxwYF4j
 +DYqFwnhHgiADO/3Y3wsqHxmDJrhq7vxHM3btxUzkKxg2mVoOI/Bm6rhqEPhNkok
 nlpMWHXR+9Jvl85IO5jHg9GHZ/PZfaDMn9naVXVpHVgycdJ06tr7T1tMtoAtsEzA
 atEkwpc+r8E2NlxkcTPAQhJzmkrHVdxgtWxlKL/RkmivmBXu3/fj2pLHYyPcvqm1
 8LxDn1DIoUHlpce10Qf7r+hf1sXiKNv+nltl9aWxdoSOM8OYHjQcp4K1qe+VYVzC
 XbXqg3ZWaGKSnieyawN2yXtFkZSzgyCy+TCTHnf8NwGfgYYk86twh2clP5t6lE58
 /TC8CmrBHIy8+79BvpSlTh7LlGip0snY3IVbZhR5EHJV3nDVtg/vdDwiSSQ6VdCM
 FM3tkY7KvZDb42IvKzD/NKmAzKv/XMri1MmQB2f/VvbwN3OK5EQOJT1DYFdiohUQ
 1YIb81HiGvlogB783HFXXAcHu/qQNZGDK4EDjNFHThPtmYqtLuOixIo0KG6BJnuV
 sl/YhtDSe3FRnvcDZ4xki9CpBqHFG7vK85H05NXXdC1ddBdQ+N+yLS1/jONUlkGc
 vJphI6FPr+DcPX8o/QuapQpNfg+HXY/h4u83jFJ8VRAyraxSarZ/19at0DM2wdvR
 IhKlNfOHlA==
 =RAVX
 -----END PGP SIGNATURE-----

Merge tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block

Pull block layer 64-bit data integrity support from Jens Axboe:
 "This adds support for 64-bit data integrity in the block layer and in
  NVMe"

* tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block:
  crypto: fix crc64 testmgr digest byte order
  nvme: add support for enhanced metadata
  block: add pi for extended integrity
  crypto: add rocksoft 64b crc guard tag framework
  lib: add rocksoft model crc64
  linux/kernel: introduce lower_48_bits function
  asm-generic: introduce be48 unaligned accessors
  nvme: allow integrity on extended metadata formats
  block: support pi with extended metadata
2022-03-26 12:01:35 -07:00
Keith Busch f3813f4b28 crypto: add rocksoft 64b crc guard tag framework
Hardware specific features may be able to calculate a crc64, so provide
a framework for drivers to register their implementation. If nothing is
registered, fallback to the generic table lookup implementation. The
implementation is modeled after the crct10dif equivalent.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220303201312.3255347-7-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-07 12:48:35 -07:00
Nicolai Stange 32f07cc40c crypto: dh - disallow plain "dh" usage in FIPS mode
SP800-56Arev3, sec. 5.5.2 ("Assurance of Domain-Parameter Validity")
asserts that an implementation needs to verify domain paramtere validity,
which boils down to either
- the domain parameters corresponding to some known safe-prime group
  explicitly listed to be approved in the document or
- for parameters conforming to a "FIPS 186-type parameter-size set",
  that the implementation needs to perform an explicit domain parameter
  verification, which would require access to the "seed" and "counter"
  values used in their generation.

The latter is not easily feasible and moreover, SP800-56Arev3 states that
safe-prime groups are preferred and that FIPS 186-type parameter sets
should only be supported for backward compatibility, if it all.

Mark "dh" as not fips_allowed in testmgr. Note that the safe-prime
ffdheXYZ(dh) wrappers are not affected by this change: as these enforce
some approved safe-prime group each, their usage is still allowed in FIPS
mode.

This change will effectively render the keyctl(KEYCTL_DH_COMPUTE) syscall
unusable in FIPS mode, but it has been brought up that this might even be
a good thing ([1]).

[1] https://lore.kernel.org/r/20211217055227.GA20698@gondor.apana.org.au

Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03 10:47:52 +12:00
Nicolai Stange d6097b8d5d crypto: api - allow algs only in specific constructions in FIPS mode
Currently we do not distinguish between algorithms that fail on
the self-test vs. those which are disabled in FIPS mode (not allowed).
Both are marked as having failed the self-test.

Recently the need arose to allow the usage of certain algorithms only
as arguments to specific template instantiations in FIPS mode. For
example, standalone "dh" must be blocked, but e.g. "ffdhe2048(dh)" is
allowed. Other potential use cases include "cbcmac(aes)", which must
only be used with ccm(), or "ghash", which must be used only for
gcm().

This patch allows this scenario by adding a new flag FIPS_INTERNAL to
indicate those algorithms that are not FIPS-allowed. They can then be
used as template arguments only, i.e. when looked up via
crypto_grab_spawn() to be more specific. The FIPS_INTERNAL bit gets
propagated upwards recursively into the surrounding template
instances, until the construction eventually matches an explicit
testmgr entry with ->fips_allowed being set, if any.

The behaviour to skip !->fips_allowed self-test executions in FIPS
mode will be retained. Note that this effectively means that
FIPS_INTERNAL algorithms are handled very similarly to the INTERNAL
ones in this regard. It is expected that the FIPS_INTERNAL algorithms
will receive sufficient testing when the larger constructions they're
a part of, if any, get exercised by testmgr.

Note that as a side-effect of this patch algorithms which are not
FIPS-allowed will now return ENOENT instead of ELIBBAD. Hopefully
this is not an issue as some people were relying on this already.

Link: https://lore.kernel.org/r/YeEVSaMEVJb3cQkq@gondor.apana.org.au
Originally-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03 10:47:51 +12:00
Nicolai Stange 60a273e9ae crypto: testmgr - add known answer tests for ffdheXYZ(dh) templates
Add known answer tests for the ffdhe2048(dh), ffdhe3072(dh), ffdhe4096(dh),
ffdhe6144(dh) and ffdhe8192(dh) templates introduced with the previous
patch to the testmgr. All TVs have been generated with OpenSSL.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-03 10:47:51 +12:00
Stephan Müller c9c28ed0ab crypto: hmac - add fips_skip support
By adding the support for the flag fips_skip, hash / HMAC test vectors
may be marked to be not applicable in FIPS mode. Such vectors are
silently skipped in FIPS mode.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-11 20:22:01 +11:00
Herbert Xu 8fc5f2ad89 crypto: testmgr - Move crypto_simd_disabled_for_test out
As testmgr is part of cryptomgr which was designed to be unloadable
as a module, it shouldn't export any symbols for other crypto
modules to use as that would prevent it from being unloaded.  All
its functionality is meant to be accessed through notifiers.

The symbol crypto_simd_disabled_for_test was added to testmgr
which caused it to be pinned as a module if its users were also
loaded.  This patch moves it out of testmgr and into crypto/algapi.c
so cryptomgr can again be unloaded and replaced on demand.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-01-31 11:21:42 +11:00
Stephan Müller 330507fbc9 crypto: des - disallow des3 in FIPS mode
On Dec 31 2023 NIST sunsets TDES for FIPS use. To prevent FIPS
validations to be completed in the future to be affected by the TDES
sunsetting, disallow TDES already now. Otherwise a FIPS validation would
need to be "touched again" end 2023 to handle TDES accordingly.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-11-26 16:25:18 +11:00
Sebastian Andrzej Siewior 82e269ad8a crypto: testmgr - Only disable migration in crypto_disable_simd_for_test()
crypto_disable_simd_for_test() disables preemption in order to receive a
stable per-CPU variable which it needs to modify in order to alter
crypto_simd_usable() results.

This can also be achived by migrate_disable() which forbidds CPU
migrations but allows the task to be preempted. The latter is important
for PREEMPT_RT since operation like skcipher_walk_first() may allocate
memory which must not happen with disabled preemption on PREEMPT_RT.

Use migrate_disable() in crypto_disable_simd_for_test() to achieve a
stable per-CPU pointer.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-10-08 20:02:46 +08:00
Tianjia Zhang 68039d605f crypto: testmgr - Add GCM/CCM mode test of SM4 algorithm
The GCM/CCM mode of the SM4 algorithm is defined in the rfc 8998
specification, and the test case data also comes from rfc 8998.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21 15:44:57 +08:00
Stephan Müller 8833272d87 crypto: drbg - self test for HMAC(SHA-512)
Considering that the HMAC(SHA-512) DRBG is the default DRBG now, a self
test is to be provided.

The test vector is obtained from a successful NIST ACVP test run.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-28 11:28:08 +08:00
Hui Tang 8e568fc2a7 crypto: ecdh - add test suite for NIST P384
Add test vector params for NIST P384, add test vector for
NIST P384 on vector of tests.

Vector param from:
https://datatracker.ietf.org/doc/html/rfc5903#section-3.1

Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 15:11:47 +08:00
Hui Tang 6889fc2104 crypto: ecdh - fix ecdh-nist-p192's entry in testmgr
Add a comment that p192 will fail to register in FIPS mode.

Fix ecdh-nist-p192's entry in testmgr by removing the ifdefs
and not setting fips_allowed.

Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 15:11:47 +08:00
Herbert Xu 3877869d13 Merge branch 'ecc'
This pulls in the NIST P384/256/192 x509 changes.
2021-03-26 19:55:55 +11:00
Saulo Alessandre c12d448ba9 crypto: ecdsa - Register NIST P384 and extend test suite
Register NIST P384 as an akcipher and extend the testmgr with
NIST P384-specific test vectors.

Summary of changes:

* crypto/ecdsa.c
  - add ecdsa_nist_p384_init_tfm
  - register and unregister P384 tfm

* crypto/testmgr.c
  - add test vector for P384 on vector of tests

* crypto/testmgr.h
  - add test vector params for P384(sha1, sha224, sha256, sha384
    and sha512)

Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26 19:41:58 +11:00
Stefan Berger 4e6602916b crypto: ecdsa - Add support for ECDSA signature verification
Add support for parsing the parameters of a NIST P256 or NIST P192 key.
Enable signature verification using these keys. The new module is
enabled with CONFIG_ECDSA:
  Elliptic Curve Digital Signature Algorithm (NIST P192, P256 etc.)
  is A NIST cryptographic standard algorithm. Only signature verification
  is implemented.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26 19:41:58 +11:00
Meng Yu 6763f5ea2d crypto: ecdh - move curve_id of ECDH from the key to algorithm name
1. crypto and crypto/atmel-ecc:
   Move curve id of ECDH from the key into the algorithm name instead
   in crypto and atmel-ecc, so ECDH algorithm name change form 'ecdh'
   to 'ecdh-nist-pxxx', and we cannot use 'curve_id' in 'struct ecdh';
2. crypto/testmgr and net/bluetooth:
   Modify 'testmgr.c', 'testmgr.h' and 'net/bluetooth' to adapt
   the modification.

Signed-off-by: Meng Yu <yumeng18@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-13 00:04:03 +11:00
Kai Ye e40ff6f3ea crypto: testmgr - delete some redundant code
Delete sg_data function, because sg_data function definition same as
sg_virt(), so need to delete it and use sg_virt() replace to sg_data().

Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-07 15:13:18 +11:00
Ard Biesheuvel 784506a1df crypto: serpent - get rid of obsolete tnepres variant
It is not trivial to trace back why exactly the tnepres variant of
serpent was added ~17 years ago - Google searches come up mostly empty,
but it seems to be related with the 'kerneli' version, which was based
on an incorrect interpretation of the serpent spec.

In other words, nobody is likely to care anymore today, so let's get rid
of it.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10 17:55:56 +11:00
Ard Biesheuvel 663f63ee6d crypto: salsa20 - remove Salsa20 stream cipher algorithm
Salsa20 is not used anywhere in the kernel, is not suitable for disk
encryption, and widely considered to have been superseded by ChaCha20.
So let's remove it.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by:  Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29 16:07:04 +11:00
Ard Biesheuvel 87cd723f89 crypto: tgr192 - remove Tiger 128/160/192 hash algorithms
Tiger is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29 16:07:04 +11:00
Ard Biesheuvel 93f6420292 crypto: rmd320 - remove RIPE-MD 320 hash algorithm
RIPE-MD 320 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29 16:07:04 +11:00
Ard Biesheuvel c15d4167f0 crypto: rmd256 - remove RIPE-MD 256 hash algorithm
RIPE-MD 256 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29 16:07:03 +11:00
Ard Biesheuvel b21b9a5e0a crypto: rmd128 - remove RIPE-MD 128 hash algorithm
RIPE-MD 128 is never referenced anywhere in the kernel, and unlikely
to be depended upon by userspace via AF_ALG. So let's remove it.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-29 16:07:03 +11:00
Ard Biesheuvel 0eb76ba29d crypto: remove cipher routines from public crypto API
The cipher routines in the crypto API are mostly intended for templates
implementing skcipher modes generically in software, and shouldn't be
used outside of the crypto subsystem. So move the prototypes and all
related definitions to a new header file under include/crypto/internal.
Also, let's use the new module namespace feature to move the symbol
exports into a new namespace CRYPTO_INTERNAL.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-03 08:41:35 +11:00
Eric Biggers 09a5ef9644 crypto: testmgr - WARN on test failure
Currently, by default crypto self-test failures only result in a
pr_warn() message and an "unknown" status in /proc/crypto.  Both of
these are easy to miss.  There is also an option to panic the kernel
when a test fails, but that can't be the default behavior.

A crypto self-test failure always indicates a kernel bug, however, and
there's already a standard way to report (recoverable) kernel bugs --
the WARN() family of macros.  WARNs are noisier and harder to miss, and
existing test systems already know to look for them in dmesg or via
/proc/sys/kernel/tainted.

Therefore, call WARN() when an algorithm fails its self-tests.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06 14:29:10 +11:00
Eric Biggers 6e5972fa4a crypto: testmgr - always print the actual skcipher driver name
When alg_test() is called from tcrypt.ko rather than from the algorithm
registration code, "driver" is actually the algorithm name, not the
driver name.  So it shouldn't be used in places where a driver name is
wanted, e.g. when reporting a test failure or when checking whether the
driver is the generic driver or not.

Fix this for the skcipher algorithm tests by getting the driver name
from the crypto_skcipher that actually got allocated.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06 14:29:10 +11:00
Eric Biggers 2257f4712d crypto: testmgr - always print the actual AEAD driver name
When alg_test() is called from tcrypt.ko rather than from the algorithm
registration code, "driver" is actually the algorithm name, not the
driver name.  So it shouldn't be used in places where a driver name is
wanted, e.g. when reporting a test failure or when checking whether the
driver is the generic driver or not.

Fix this for the AEAD algorithm tests by getting the driver name from
the crypto_aead that actually got allocated.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06 14:29:10 +11:00