Граф коммитов

169 Коммитов

Автор SHA1 Сообщение Дата
Hidetoshi Seto 38cc13022e PCI : add extremely specialized __pci_reenable_device for default resume
Original patch was posted as "PCI : Move pci_fixup_device and is_enabled".
This 3 of 3 patches does:

  - add __pci_reenable_device
    (recover former change of 1st patch)

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:03 -08:00
Hidetoshi Seto 924b08f3ff PCI : remove too specialized __pci_enable_device for default resume
Original patch was posted as "PCI : Move pci_fixup_device and is_enabled".
This 1 of 3 patches does:

  - reverts small part of Inaky's patch
    (remove __pci_enable_device)
    This change will be recovered by 3rd patch.

  - temporarily remove pci_fixup_device.
    This change will be recovered by 2nd patch.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:03 -08:00
Inaky Perez-Gonzalez bae94d0237 PCI: switch pci_{enable,disable}_device() to be nestable
Changes the pci_{enable,disable}_device() functions to work in a
nested basis, so that eg, three calls to enable_device() require three
calls to disable_device().

The reason for this is to simplify PCI drivers for
multi-interface/capability devices. These are devices that cram more
than one interface in a single function. A relevant example of that is
the Wireless [USB] Host Controller Interface (similar to EHCI) [see
http://www.intel.com/technology/comms/wusb/whci.htm]. 

In these kind of devices, multiple interfaces are accessed through a
single bar and IRQ line. For that, the drivers map only the smallest
area of the bar to access their register banks and use shared IRQ
handlers. 

However, because the order at which those drivers load cannot be known
ahead of time, the sequence in which the calls to pci_enable_device()
and pci_disable_device() cannot be predicted. Thus:

1. driverA     starts     pci_enable_device()
2. driverB     starts     pci_enable_device()
3. driverA     shutdown   pci_disable_device()
4. driverB     shutdown   pci_disable_device()

between steps 3 and 4, driver B would loose access to it's device,
even if it didn't intend to.

By using this modification, the device won't be disabled until all the
callers to enable() have called disable().

This is implemented by replacing 'struct pci_dev->is_enabled' from a
bitfield to an atomic use count. Each caller to enable increments it,
each caller to disable decrements it. When the count increments from 0
to 1, __pci_enable_device() is called to actually enable the
device. When it drops to zero, pci_disable_device() actually does the
disabling.

We keep the backend __pci_enable_device() for pci_default_resume() to
use and also change the sysfs method implementation, so that userspace
enabling/disabling the device doesn't disable it one time too much.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:36:59 -08:00
Brice Goglin 3f79e107f7 MSI: Cleanup existing MSI quirks
Move MSI quirks in CONFIG_PCI_MSI, document why the serverworks quirk
does not simply set PCI_BUS_FLAGS_NO_MSI, and create a generic quirk
for other chipsets where setting PCI_BUS_FLAGS_NO_MSI is fine.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26 17:43:52 -07:00
Kristen Carlson Accardi ffadcc2ff4 [PATCH] PCI: PCIE power management quirk
When changing power states from D0->DX and then from DX->D0, some
Intel PCIE chipsets will cause a device reset to occur.  This will
cause problems for any D State other than D3, since any state
information that the driver will expect to be present coming from
a D1 or D2 state will have been cleared.  This patch addes a
flag to the pci_dev structure to indicate that devices should
not use states D1 or D2, and will set that flag for the affected
chipsets.  This patch also modifies pci_set_power_state() so that
when a device driver tries to set the power state on
a device that is downstream from an affected chipset, or on one
of the affected devices it only allows state changes to or
from D0 & D3.  In addition, this patch allows the delay time
between D3->D0 to be changed via a quirk.  These chipsets also
need additional time to change states beyond the normal 10ms.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12 16:05:48 -07:00
Greg Kroah-Hartman e31dd6e452 [PATCH] 64bit resource: change pci core and arch code to use resource_size_t
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com>

Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27 09:24:00 -07:00
Zhang Yanmin d71374dafb [PATCH] PCI: fix race with pci_walk_bus and pci_destroy_dev
pci_walk_bus has a race with pci_destroy_dev. When cb is called
in pci_walk_bus, pci_destroy_dev might unlink the dev pointed by next.
Later on in the next loop, pointer next becomes NULL and cause
kernel panic.

Below patch against 2.6.17-rc4 fixes it by changing pci_bus_lock (spin_lock)
to pci_bus_sem (rw_semaphore).

Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 12:00:01 -07:00
Shaohua Li 41017f0cac [PATCH] PCI: MSI(X) save/restore for suspend/resume
Add MSI(X) configure sapce save/restore in generic PCI helper.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 12:25:25 -07:00
Matthew Wilcox 309e57df7b [PATCH] PCI: Provide a boot parameter to disable MSI
Several drivers are starting to grow options to disable MSI.  However,
it's often a host chipset issue, not something which individual drivers
should handle.  So we add the pci=nomsi kernel parameter to allow the user
to disable MSI modes for systems we haven't added to the quirk list yet.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:35:16 -08:00
Adrian Bunk 54c762fe62 [PATCH] PCI: drivers/pci: some cleanups
This patch contains the following cleanups:
- hotplug/pciehp_core.c: make the needlessly global hpdriver_context
                         static
- #if 0 the following unused functions:
  - pci.c: pci_bus_max_busnr()
  - pci.c: pci_max_busnr()
  - proc.c: pci_proc_attach_bus()
  - remove.c: pci_remove_device_safe

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09 12:13:20 -08:00
Kay Sievers 312c004d36 [PATCH] driver core: replace "hotplug" by "uevent"
Leave the overloaded "hotplug" word to susbsystems which are handling
real devices. The driver core does not "plug" anything, it just exports
the state to userspace and generates events.

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:08 -08:00
Brian King e04b0ea2e0 [PATCH] PCI: Block config access during BIST
Some PCI adapters (eg.  ipr scsi adapters) have an exposure today in that they
issue BIST to the adapter to reset the card.  If, during the time it takes to
complete BIST, userspace attempts to access PCI config space, the host bus
bridge will master abort the access since the ipr adapter does not respond on
the PCI bus for a brief period of time when running BIST.  On PPC64 hardware,
this master abort results in the host PCI bridge isolating that PCI device
from the rest of the system, making the device unusable until Linux is
rebooted.  This patch is an attempt to close that exposure by introducing some
blocking code in the PCI code.  When blocked, writes will be humored and reads
will return the cached value.  Ben Herrenschmidt has also mentioned that he
plans to use this in PPC power management.

Signed-off-by: Brian King <brking@us.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/pci/access.c    |   89 ++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/pci/pci-sysfs.c |   20 +++++-----
 drivers/pci/pci.h       |    7 +++
 drivers/pci/proc.c      |   28 +++++++--------
 drivers/pci/syscall.c   |   14 +++----
 include/linux/pci.h     |    7 +++
 6 files changed, 134 insertions(+), 31 deletions(-)
2005-10-28 15:36:58 -07:00
Paul Mackerras cdb9b9f730 [PATCH] PCI: Small rearrangement of PCI probing code
This patch makes some small rearrangements of the PCI probing code in
order to make it possible for arch code to set up the PCI tree
without needing to duplicate code from the PCI layer unnecessarily.
PPC64 will use this to set up the PCI tree from the Open Firmware
device tree, which we need to do on logically-partitioned pSeries
systems.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-09 13:58:45 -07:00
Andrew Morton 4b47b0eefc [PATCH] PCI: fix quirk-6700-fix.patch
drivers/built-in.o(.text+0x32c3): In function `quirk_pcie_pxh':
/usr/src/25/drivers/pci/quirks.c:1312: undefined reference to `disable_msi_mode'

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16 21:06:24 -07:00
Kristen Accardi 4602b88d97 [PATCH] PCI: 6700/6702PXH quirk
On the 6700/6702 PXH part, a MSI may get corrupted if an ACPI hotplug
driver and SHPC driver in MSI mode are used together.

This patch will prevent MSI from being enabled for the SHPC as part of
an early pci quirk, as well as on any pci device which sets the no_msi
bit.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16 21:06:24 -07:00
David Shaohua Li b913100d73 [ACPI] pci_set_power_state() now calls
platform_pci_set_power_state()
		and ACPI can answer

http://bugzilla.kernel.org/show_bug.cgi?id=4277

Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11 23:47:06 -04:00
David Shaohua Li 0f64474b8f [ACPI] PCI can now get suspend state from firmware
pci_choose_state() can now call
	platform_pci_choose_state()
		and ACPI can answer

http://bugzilla.kernel.org/show_bug.cgi?id=4277

Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11 23:46:10 -04:00
Scott Murray c22610dadc [PATCH] PCI Hotplug: remove pci_visit_dev
If my CPCI hotplug update patch is applied, then there are no longer any
in tree users of the pci_visit_dev API, and it and its related code can be
removed.

Signed-off-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17 14:31:11 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00