Граф коммитов

13225 Коммитов

Автор SHA1 Сообщение Дата
Mark Brown 2b4d39fc2a ASoC: arizona: Support variable FLL VCO multipliers
Some Arizona chips have a higher frequency for the FLL VCO, support this
in the common code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-10 17:17:35 +01:00
Jiri Prchal a1f34af0ec ASoC: tlv320aic3x: add input clock selection
This patch adds input selection of main codec clock - from what pin.
Both registers set same value since codec uses clock divider or pll at one time.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-10 14:41:48 +01:00
Jiri Prchal bb1daa803c ASoC: tlv320aic3x: add AGC settings
This patch adds AGC target level and times settings for TLV320AIC3x.
Enums uses small arrays of two channels left and right since it uses different registers.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-10 14:41:48 +01:00
Arnd Bergmann 31dfec74c0 Merge branch 'next/devel-dma-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dma
From Kukjin Kim <kgene.kim@samsung.com>:

Here is updating DMA common operation for Samsung SoCs.

Since some DMA client driver such as spi needs to change the configuration
after dma_request() so this branch adds dma_config() can configure DMA
transmit option which is included in dma_request() after that.

Note, according to the changes, needs to update spi and ASoC drivers
for Samsung SoCs and only got the ack from Mark Brown not Grant Likely
and as I know, he is busy for moving. But I think, the spi change has
no problem and it is simple.

* 'next/devel-dma-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: Fix compiler warning in dma-ops.c file
  ASoC: follow the updated samsung DMA common operations
  spi/s3c64xx: Add the use of DMA config operation
  ARM: SAMSUNG: Add config() function in DMA common operations

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-10 14:12:05 +02:00
Jiri Prchal 774441915d ASoC: tlv320aic3x: add deemphasis switch
This patch adds missing deemphasis switch.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-09 19:36:13 +01:00
Mark Brown bc9dce5853 ASoC: wm5102: Fix cut'n'paste for digital volume registers
The analogue PGA shifts were used; this makes no practical difference as
the values are the same.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-09 19:35:09 +01:00
Mark Brown c9c56fd0b7 ASoC: arizona: Add IN4 to the mixer tables
Some devices have four input structures rather than three.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-09 19:35:04 +01:00
Mark Brown a837987e7b ASoC: arizona: Export dai_ops
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-09 12:16:41 +01:00
Arnd Bergmann 524cd267e5 Merge branch 'for-3.6/common-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/clk
From Stephen Warren <swarren@wwwdotorg.org>:

This branch contains numerous changes required as a baseline in order to
convert Tegra to the common clock framework. The intention was to also
include patches to actually convert Tegra to the common clock framework.
However, those patches appeared late in the kernel cycle and currently
cause regressions on some boards, so were dropped for now.

* 'for-3.6/common-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: Provide clock for only one PWM controller
  ARM: tegra: Fix PWM clock programming
  ARM: tegra: dma: rename driver name for clock to "tegra-apbdma"
  ARM: tegra: Remove second instance of uart clk
  crypto: add clk_prepare/clk_unprepare
  ASoC: tegra: add clk_prepare/clk_unprepare
  staging: nvec: add clk_prepare/clk_unprepare
  spi/tegra: add clk_prepare/clk_unprepare
  Input: tegra-kbc - add clk_prepare/clk_unprepare
  USB: ehci-tegra: add clk_prepare/clk_unprepare
  mmc: tegra: add clk_prepare/clk_unprepare
  i2c: tegra: Add clk_prepare/clk_unprepare
  ARM: tegra: add clk_prepare/clk_unprepare

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-06 22:21:23 +02:00
Arnd Bergmann ebaaa25de8 Merge branch 'tegra/cleanup' into next/clk
Dependency for tegra/common-clk branch

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-06 22:20:40 +02:00
Arnd Bergmann 8e31cbc66b Merge branch 'for-3.6/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup
From Stephen Warren <swarren@wwwdotorg.org>:

This branch contains various minor cleanups, such as binding and .dts
renames, DT content cleanup, SDHCI support-8bit property usage cleanup, and
removal of some unnecessary sleep code.

* 'for-3.6/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: dt: tegra: rename board files to match SoC
  ASoC: tegra: simplify Kconfig dependencies
  ARM: dt: tegra: remove legacy support-8bit property
  mmc: tegra: use bus-width property instead of support-8bit
  ARM: tegra: Remove flow controller programming
  dt: name all Tegra binding docs consistently
  ARM: tegra20: Rename "emc" to "memory-controller"
  ARM: dt: tegra20: Rename "emc" to "memory-controller"
  ARM: tegra{20,30}: Rename "mc" to "memory-controller"
  ARM: dt: tegra{20,30}.dtsi: Rename "mc" to "memory-controller"
  amba: tegra-ahb: Remove empty *_remove()

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-06 22:09:21 +02:00
Peter Ujfalusi d66a547cdd ASoC: omap-mcpdm: Add missing MODULE_ALIAS
The MODULE_ALIAS() was missing from the driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06 19:07:38 +01:00
Mark Brown 410837a7a2 ASoC: arizona: Change DAPM routes for AIF clocks when we change them
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-07-06 19:07:00 +01:00
Mark Brown efcc3c61b9 ASoC: dapm: Allow routes to be deleted at runtime
Since we're now relying on DAPM for things like enabling clocks when we
reparent the clocks for widgets we need to either use conditional routes
(which are expensive) or remove routes at runtime. Add a route removal
API to support this use case.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-07-06 19:06:59 +01:00
Mark Brown fabd03842b ASoC: dapm: Mark widgets as dirty when a route is added
If we add a new route at runtime then we'll need to recheck the connections
to the affected widgets.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-07-06 19:06:59 +01:00
Liam Girdwood 3ac3f5ca91 ASoC: dpcm: Allow FE to be opened without valid BE routes.
Some userspace will open a PCM device and then configure mixers
for routing before triggering. This patch allows userspace to do
this sequence.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06 19:06:58 +01:00
Simon Wilson 3e4536546b ASoC: twl6040: fix spelling mistake
Fix spelling mistake in "High-Performance" option of twl6040 power mode.

Signed-off-by: Simon Wilson <simonwilson@google.com>
Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06 19:06:50 +01:00
Liam Girdwood 4123128ee4 ASoC: dapm: Make sure all dapm contexts are updated
Make sure we set the bias level for all DAPM contexts when
changing level.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06 19:05:07 +01:00
Liam Girdwood 5cb9b74822 ASoC: pcm: Clean up logging in soc_new_pcm()
Use dev_ style logging throughout soc_new_pcm()

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-06 18:59:15 +01:00
Liam Girdwood 01005a729a ASoC: dapm: Fix locking during codec shutdown
Codec shutdown performs a DAPM power sequence that might cause conflicts
and/or race conditions if another stream power event is running simultaneously.
Use card's dapm mutex to protect any potential race condition between them.

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2012-07-06 18:58:46 +01:00
Takashi Iwai 9e9b594661 ALSA: usb-audio: Fix the first PCM interface assignment
In the new PCM streaming logic, the interface number is assigned to
usb stream instance (subs->interface) after the format and rate setups
are succeeded, but some codes are still passing subs->interface as the
reference to helper functions.  This leads to initializing with an
invalid iface number (-1).

This patch replaces the wrong references with the ones from the target
fmt correctly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-06 08:11:43 +02:00
Mark Brown bcbf4a69ee ASoC: wm1250-ev1: Flag all supported rates in the DAI
Not previously noticed due to normal usage being with CODEC<->CODEC links.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-05 20:49:37 +01:00
Mark Brown 9498822d75 ASoC: wm5102: Allow routing through the ASRCs
This enables common telephony use cases.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-05 17:44:19 +01:00
Mark Brown c013b27a17 ASoC: arizona: Enable ASYNCCLK domain for audio interfaces
If an audio interface is configured to use ASYNCCLK then update the
asynchronous sample rate rather than one of our primary sample rates.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-05 17:44:17 +01:00
Fabio Estevam 42810d1622 ASoC: imx-mc13783: Add audmux settings for mx27pdk
mx27pdk board also has a mc13783 codec.

Add support for it and do a run-time machine type check to perform the correct
audiomux settings.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-05 13:48:25 +01:00
Hui Wang ef3207c503 ASoC: fsl: remove unneeded AUDMUX register setting from imx-sgtl5000
If we don't set IMX_AUDMUX_V2_PTCR_TCLKDIR in the AUDMUX PTCR
register (means Tx clock pin is input), we don't need to set
IMX_AUDMUX_V2_PTCR_TCSEL as well. Since both i.MX35, i.MX51 and
i.MX6 datasheet says "When Tx clock pin set as an input, the TCSEL
settings are ignored".

Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-05 13:47:11 +01:00
Mark Brown 1464189f8c ALSA: pcm: Make constraints lists const
They aren't modified by the core so the drivers can declare them const.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-05 14:19:39 +02:00
David Henningsson a7a0a64dab ALSA: hda - Always call standard unsolicited event for Realtek codecs
With the model parsers out of the way, we have no custom unsol
events to worry about, we can therefore simplify the code.

In addition, this fixes a bug on the ASUS TC710, which has only
a headphone jack and a mic jack, but no internal mic or speakers.
Therefore the unsol_event pointer was not set, and as a result,
the jack kcontrols were not correctly updated.

BugLink: https://bugs.launchpad.net/bugs/1021192
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-05 12:22:47 +02:00
Mark Brown 5001765f99 ASoC: arizona: Be more forgiving in BCLK selection
Allow any BCLK which can be divided down to generate LRCLK, not just the
lowest possible BCLK to clock out the samples.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 19:15:46 +01:00
Mark Brown 5b2eec3f98 ASoC: arizona: Implement AIF clock configuration
Allow the user to select which of the system clocks each AIF is referenced
to and constran the DAI to the set of frequencies which can be generated
from that clock.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 19:15:45 +01:00
Mark Brown 949e6bc75f ASoC: arizona: Rename current rates tables to bclk_rates
They're the rates for the BCLK, not for the sample rate, so rename so that
we don't confuse ourselves.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 19:15:44 +01:00
Mark Brown 1520ffd218 ASoC: dwc: Staticise non-exported i2s_start()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 19:15:43 +01:00
Vipin Kumar e584f9b4c2 ASoC: SPEAr spdif_out: Add spdif out support
This patch implements the spdif out driver for ST peripheral. This
peripheral implements IEC60958 standard

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 12:34:28 +01:00
Rajeev Kumar 3be58dbb92 ASoC: STA529: Add support for STA529 Audio Codec
The STA529 is a digital stereo class-D audio amplifier. It includes an
audio DSP, an ST proprietary high-efficiency class-D driver and CMOS
power output stage. It is intended for high-efficiency
digital-to-power-audio conversion for portable applications.

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 12:34:27 +01:00
Jiri Prchal c9e8e8d254 ASoC: tlv320aic3x: extending registers cache
Adds missing register default values to cache.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 12:34:27 +01:00
Jiri Prchal 784a897e23 ASoC: tlv320aic3x: add missing registers and bits
Adds register and bit shift definitions in header file.
Changes are for TLV320AIC310x based on data sheet.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 12:34:26 +01:00
Takashi Iwai f68d891d85 Merge branch 'topic/hda-beep' into topic/hda 2012-07-04 09:12:50 +02:00
Mark Brown 2974d6b1aa ASoC: wm8994: Don't suspend accessory detection
Leave it up to the machine driver to disable accessory detection if
desired, the common pattern is to have accessory detection be a wake
source.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-03 20:11:16 +01:00
Mark Brown 38cbf9598f ASoC: core: Try to use regmap if the driver doesn't set up any I/O
Since most new drivers are expected to use regmap and since frequently the
only thing we need to do in the CODEC probe function is configure the I/O
try to initialise the register I/O using regmap if the driver hasn't done
so after probe().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-07-03 20:11:00 +01:00
Mark Brown 081413f206 ASoC: wm8962: Log AIF configuration requested by hw_params()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-03 20:10:51 +01:00
Benoît Thébaudeau 32fee7afe7 ASoC: dapm: Fix dapm_set_path_status() connect
dapm_set_path_status() sets connect incorrectly in the case max > 1 with invert.
In that case, the raw disconnect value should be max, which corresponds to the
userspace value 0.

This use case currently does not appear upstream, but it could break
SOC_DAPM_SINGLE() or SOC_DAPM_SINGLE_TLV() elsewhere or in the future.

This patch completes commit 3a9abe8.

Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: <alsa-devel@alsa-project.org>
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-03 20:08:29 +01:00
Laxman Dewangan df79f55df3 ASoC: tegra: use dmaengine based dma driver
Use the dmaengine based Tegra APB DMA driver for
data transfer between SPI fifo and memory in
place of legacy Tegra APB DMA.

Because generic soc-dmaengine-pcm uses the DMAs API
based on dmaengine, using the exported APIs provided
by this generic driver.

The new driver is selected if legacy driver is not
selected and new dma driver is enabled through config
file.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-03 20:07:24 +01:00
Benoît Thébaudeau da602ab8a1 ASoC: dapm: Remove incomplete stereo code
Stereo is not yet supported by dapm widgets, so remove stereo code from
snd_soc_dapm_get_volsw(), and warn if stereo controls are detected.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-03 19:53:54 +01:00
Sachin Kamat 9c9acc9156 ASoC: smdk_wm8994: Convert to use snd_soc_register_card()
Current method for machine driver to register with the ASoC core is to use
snd_soc_register_card() instead of creating a "soc-audio" platform device.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-03 19:48:29 +01:00
Linus Torvalds ff826b2b5b Sound fixes for 3.5-rc6
Just a few driver-specific fixes for ASoC and HD-audio.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJP8utuAAoJEGwxgFQ9KSmkG9kQAI3mh986pLpPCnSQq76KOvRJ
 1zPk+X+zAAGKJjbPGidZjH1zt5CrYpH40PX/X6/mteCRY6nHdeIL0NQwfThAQvxs
 +7xwjf35tlpS9+atvGTlSEWkDB3XgQ+llUixfuN5dZ5QAdA1hDABHlJqZNxuNHa0
 NBgQ0UghAWUvSZ3ibf2Tv6d3CH4IRAvyATEqaTz20m6bnv3kUFBfCtuT9BbMg0Wm
 Y7dPWylSgr8ERjHpSGIov/hpi9+AtJgxudRS4bOMgUarDqmGLoA2GMlH6wTQ8lHW
 HSZywRBJFXlYYhBvKbM+hf48ghN0CeLlRXKmHmOBoEafPTYso+B6+cvloK2g07qo
 V+R65jCgXqTu2eaRvSkzn+t1p+K0ZwWqcfniFJ4n7RKi2nx+yKztBDDG0ZdciH+Y
 AlKDyRvRoqavSTajrpr9Ii90Q1bm6yVRguQj0AwFpeCPpmvBHtr/uHafwWYuZVF2
 7oVAHKt39YsYxJYGiEARRieBUSHkwLDOqzys1z1+0fc+widO91nHh52aVZ+eALOi
 BIi7W86eLoQt7ltM817P7jaz0R61Cg/PsRHt8ZbpySkTJELINS8A2Kuqnf/nYchx
 o1c1vbcoTjWUnHJBmdbI13WrmOu+tOT8X+YwHdMTgtLt4BVKq/+oJ1hB8Om+QXpe
 V8qtG0RII+Hxt7ecQrcC
 =iN3h
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Just a few driver-specific fixes for ASoC and HD-audio."

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix no sound from ALC662 after Windows reboot
  ASoC: tlv320aic3x: Fix codec pll configure bug
  ASoC: wm2200: Add missing BCLK rate
2012-07-03 11:10:18 -07:00
Takashi Iwai 3fd877d32c ALSA: hda - Avoid possible race of beep on/off
Call cancel_work_sync() when turning off the beep switch so that the
mute call is executed in a proper order.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 18:31:37 +02:00
Takashi Iwai 257dfb4100 ALSA: hda - Get rid of superfluous beep->mode field
It's no longer necessary since beep_mode=2 option was dropped.
It can be checked simply via codec->beep != NULL.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 18:31:36 +02:00
Takashi Iwai 0401e8548e ALSA: hda - Move beep helper functions to hda_beep.c
Move snd_hda_mixer_amp_switch_put_beep() to hda_beep.c as a clean up
to remove one more ifdef.

Also add the corresponding get callback to return consistently the
digital beep state independently from the mixer amp value.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 18:31:36 +02:00
Takashi Iwai 0920c9b4c4 ALSA: hda - Remove beep_mode=2
The beep_mode=2 option was introduced to make the beep mixer
controlling the beep input allocation/deallocation dynamically, so
that a user can switch between HD-audio codec digital beep and the
system beep only via mixer API.  This was necessary because the
keyboard driver took only the first input beep instance at that time.

However, the recent keyboard driver already processes the multiple
input instances, thus there is no point to keep this mode.

Let's remove it.

Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 18:31:20 +02:00
Takashi Iwai 81fcb17085 ALSA: Move some headers to local directories from include/sound
This is a bit clean up of public sound header directory.
Some header files in include/sound aren't really necessary to be
located there but can be moved to their local directories gracefully.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 08:23:09 +02:00
Takashi Iwai 2cb1331d9d ALSA: pdaudiocf: Remove superfluous pm_message_t argument from suspend
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 08:23:08 +02:00
Takashi Iwai 68cb2b5592 ALSA: Convert to new pm_ops for PCI drivers
Straightforward conversion to the new pm_ops from the legacy
suspend/resume ops.

Since we change vx222, vx_core and vxpocket have to be converted,
too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 08:23:03 +02:00
Takashi Iwai 284e7ca75f ALSA: convert PM ops of platform_driver to new pm ops
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 07:58:19 +02:00
Arnd Bergmann fdc0867884 Merge branch 'imx/sparse-irq' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/irq
From Shawn Guo <shawn.guo@linaro.org>, this makes it possible to use
sparse irqs with mach-imx.

* 'imx/sparse-irq' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx: enable SPARSE_IRQ for imx platform
  ARM: fiq: change FIQ_START to a variable
  tty: serial: imx: remove the use of MXC_INTERNAL_IRQS
  ARM: imx: remove unneeded mach/irq.h inclusion
  i2c: imx: remove unneeded mach/irqs.h inclusion
  ARM: imx: add a legacy irqdomain for mx31ads
  ARM: imx: add a legacy irqdomain for 3ds_debugboard
  ARM: imx: pass gpio than irq number into mxc_expio_init
  ARM: imx: leave irq_base of wm8350_platform_data uninitialized
  dma: ipu: remove the use of ipu_platform_data
  ARM: imx: move irq_domain_add_legacy call into avic driver
  ARM: imx: move irq_domain_add_legacy call into tzic driver
  gpio/mxc: move irq_domain_add_legacy call into gpio driver
  ARM: imx: eliminate macro IRQ_GPIOx()
  ARM: imx: eliminate macro IOMUX_TO_IRQ()
  ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-02 23:18:19 +02:00
Takashi Iwai 8bf01d8abc ALSA: Add missing .owner=THIS_MODULE to platform_driver definitions
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-02 17:50:05 +02:00
Robert Jarzmik 890255e704 ASoC: mioa701: convert to snd_soc_register_card API
The mioa701 board code is converted to the snd_soc_register_card()
and snd_soc_unregister_card() APIs.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-01 19:31:52 +01:00
Shawn Guo 8842a9e286 ARM: imx: enable SPARSE_IRQ for imx platform
As all irqchips on imx have been changed to allocate their irq_descs,
and all unneeded mach/irqs.h inclusions on imx have been cleaned up,
now it's time to select SPARSE_IRQ for imx/mxc.

The SPARSE_IRQ support forces irqs allocation starting from 16.  All
those static irq number definition for SoCs need to shift 16 to keep
non-DT boot works.

With all those static IRQ number and start definitions removed from
mach/irqs.h, the header becomes just a container of a couple of
mach-imx specific irq/fiq calls.  Since mach/irqs.h is not included
by asm/irq.h now, the users of mxc_set_irq_fiq needs to explicitly
include mach/irqs.h themselves.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-07-01 21:59:20 +08:00
Kailang Yang 8663ff75cd ALSA: hda - Fix no sound from ALC662 after Windows reboot
Windows use hidden register to control EAPD.
Linux use verb to control EAPD.
If windows reboot to Linux, it must change the EAPD control to verb
control.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-29 09:44:44 +02:00
Hebbar, Gururaja c9fe573a65 ASoC: tlv320aic3x: Fix codec pll configure bug
In sound/soc/codecs/tlv320aic3x.c

        data = snd_soc_read(codec, AIC3X_PLL_PROGA_REG);
        snd_soc_write(codec, AIC3X_PLL_PROGA_REG,
                      data | (pll_p << PLLP_SHIFT));

In the above code, pll-p value is OR'ed with previous value without
clearing it. Bug is not seen if pll-p value doesn't change across
Sampling frequency.

However on some platforms (like AM335x EVM-SK), pll-p may have different
values across different sampling frequencies. In such case, above code
configures the pll with a wrong value.
Because of this bug, when a audio stream is played with pll value
different from previous stream, audio is heard as differently(like its
stretched).

Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2012-06-29 08:18:03 +01:00
Mark Brown b0dfa4541e ASoC: wm2200: Add missing BCLK rate
Without this very high BCLKs will be configured incorrectly.

Reported-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2012-06-29 08:18:02 +01:00
Benoît Thébaudeau 8a720718b3 ASoC: dapm: Fix snd_soc_dapm_put_volsw() connect
snd_soc_dapm_put_volsw() sets connect incorrectly in the case max > 1 with
invert. In that case, the raw disconnect value should be max, which corresponds
to the userspace value 0.

This use case currently does not appear upstream, but it could break
SOC_DAPM_SINGLE() or SOC_DAPM_SINGLE_TLV() elsewhere or in the future.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-29 08:13:32 +01:00
Mark Brown adf643aba8 ASoC: spdif: Build separate RX and TX objects
Otherwise we fail to link when building as modules due to multiple
init/exit functions.

Reported-by: Fengguang Wu <wfg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-29 02:34:46 +01:00
Vipin Kumar cdf605255c ASoC: spdif_receiver: Add support for spdif in Audio Codec
This patch adds the support for spdif in audio codec.

Signed-off-by: vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-28 13:15:10 +01:00
Mark Brown 6b4a21b64c ASoC: dwc: Add missing __iomem annotations
Otherwise sparse gets very upset with us.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-28 13:14:52 +01:00
Linus Torvalds 2b25679453 Sound fixes for 3.5-rc5
Here you find quite a few changes for HD-audio and a copule of quirk
 additions for USB-audio.  All reasonably small and/or trivial.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJP6tBMAAoJEGwxgFQ9KSmkhUsQAJcwhnQb27EB9eBnhjcZvmPS
 2K02VNVhoh7kVVjQQ92znpeu+5WFdpFyiBzRPkAzkRR29k7KAtYQRrKg0En7qOL7
 RN6CuZAhIr0D7r8QhpeiJ1ZqpOTzPpycBscYUWZGJR07+iBOZIGIuly4hcWWy2WQ
 ntwcaeDk/n6PWYCwaMxsGdarOZEBh+dcB/8m7QpRtLEOs72IbzpFGyvXpK/Cv+Fd
 8rxVL4JYeDq3bRpHlDQhiPejOW1OnX9H5FkUz28Z38AMAECYGoQ6gIpCybBXNgl3
 Ck+xlL7LeVw8S1ZwpZeNnCLG4qzbUDD6e879X0MtvskaDbE04RD68qWSZVgUD37k
 A/zIJdP2hJNnNdXr5nXn9EqF+hIfndUNnBUjtAp8yJm6PJSOGac5fDk34DD8crM8
 /1/bwyGrGjSfALxL78dZjSDK3LFa/q6llKqoCFf+oxpcNnevuf13ZWyYeM7ol6lC
 q8j6lvNCpDdvCULmnNaTUF2wOpyGKwwFfsiFawhDZf86IqJ44FvDo0ybgbS7IkeO
 UdAjInzFovVJ0jGmKAY5B2Saic8Aem21Z4PAerOfkMAvxGE6P0QvSHPnCMcfWbtI
 dFVBSG6vSpM02Htwn1yU+a99qMRN2n13xedPq0SfZTGM0sCFecCaNU8jpQ9hqBwv
 PEREXZGsaG8JIAESxuM3
 =V/+z
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Here you find quite a few changes for HD-audio and a copule of quirk
  additions for USB-audio.  All reasonably small and/or trivial."

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix power-map regression for HP dv6 & co
  ALSA: hda - Initialize caches at codec reconfiguration
  ALSA: hda - Fix memory leaks at module unload
  ALSA: hda - Fix memory leaks in Realtek & Conexant codec parsers
  ALSA: hda - Add Realtek ALC280 codec support
  ALSA: hda - Remove obsoleted CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
  ASoC: wm8994: remove duplicate code
  ALSA: usb-audio: add BOSS GT-100 support
  ALSA: HDA: Add inverted internal mic quirk for Lenovo S205
  ALSA: hda - Fix ALC272X codec detection
  ALSA: snd_usb_audio: ignore ctrl errors on QuickCam Pro for Notebooks
  ALSA: snd_usb_audio: ignore ctrl errors on QuickCam E3500
2012-06-27 12:50:28 -07:00
David Henningsson 5780b627e2 ALSA: hda - give 3-pin jack the name "Headphone Mic Jack"
This 3-pin jack was labeled "Headphone Jack", but it could also be
used as a mic jack just by switching "Input Source". Therefore we need
to call the jack something else, to make sure PulseAudio can use the
speaker together with the external mic. (PulseAudio might mute the
speaker if it detects a headphone being plugged in.)

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-27 20:21:02 +02:00
David Henningsson 00227f15a0 ALSA: HDA: Support single 3-pin jack without VREF on the actual pin
Some ASUS device has a single 3-pin jack that can either be a mic or
a headphone, but the pin does not have VREF capabilities. We've been
told by Realtek to instead enable VREF on pin 0x18 in that case.

BugLink: https://bugs.launchpad.net/bugs/1018262
Tested-by: Chih-Hsyuan Ho <chih.ho@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-27 20:20:40 +02:00
Mark Brown 3dba1c2652 ASoC: wm5102: Remove unused platform data header
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-27 15:02:40 +01:00
Mauro Carvalho Chehab a99817ca60 Merge branch 'v4l_for_linus' into staging/for_v3.6
* v4l_for_linus: (44 commits)
  [media] smia: Fix compile failures
  [media]  Fix VIDIOC_DQEVENT docbook entry
  [media] s5p-fimc: Fix control creation function
  [media] s5p-mfc: Fix checkpatch error in s5p_mfc_shm.h file
  [media] s5p-mfc: Fix setting controls
  [media] v4l/s5p-mfc: added image size align in VIDIOC_TRY_FMT
  [media] v4l/s5p-mfc: corrected encoder v4l control definitions
  [media] v4l: mem2mem_testdev: Fix race conditions in driver
  [media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism
  [media] cxd2820r: Fix an incorrect modulation type bitmask
  [media] em28xx: Show a warning if the board does not support remote controls
  [media] em28xx: Add remote control support for Terratec's Cinergy HTC Stick HD
  [media] USB: Staging: media: lirc: initialize spinlocks before usage
  [media] Revert "[media] media: mx2_camera: Fix mbus format handling"
  [media] bw-qcam: driver and pixfmt documentation fixes
  [media] cx88: fix firmware load on big-endian systems
  [media] cx18: support big-endian systems
  [media] ivtv: fix support for big-endian systems
  [media] tuner-core: return the frequency range of the correct tuner
  [media] v4l2-dev.c: fix g_parm regression in determine_valid_ioctls()
  ...

Conflicts:
	Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
	drivers/media/video/em28xx/em28xx-cards.c
2012-06-27 08:57:09 -03:00
Daniel Mack da185443c1 ALSA: snd-usb-caiaq: initialize card pointer
Fixes the following warning:

  CC [M]  sound/usb/caiaq/device.o
sound/usb/caiaq/device.c: In function ‘snd_probe’:
sound/usb/caiaq/device.c:500:16: warning: ‘card’ may be used
uninitialized in this function [-Wmaybe-uninitialized]

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-27 12:26:19 +02:00
Takashi Iwai b54f8abad6 Merge branch 'fix/hda' into topic/hda 2012-06-26 18:06:01 +02:00
Takashi Iwai 6e1c39c6b0 ALSA: hda - Fix power-map regression for HP dv6 & co
The recent fix for power-map controls (commit b0791dda81) caused
regressions on some other HP laptops.  They have fixed pins but these
pins are exposed as jack-detectable.  Thus the driver tries to control
the power-map dynamically per jack detection where it never gets on.

This patch adds the check of connection and it assumes the no jack
detection is available for fixed pins no matter what pin capability
says.

BugLink: http://bugs.launchpad.net/bugs/1013183
Reported-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-26 17:43:06 +02:00
Takashi Iwai 09a6071bfe ALSA: hda - Initialize caches at codec reconfiguration
Better to clean up the caches for avoiding inconsistent codec state
after the reconfiguration.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-26 15:01:33 +02:00
Takashi Iwai 59cad16bc6 ALSA: hda - Fix memory leaks at module unload
Some caches aren't released properly at module unloading time.

Cc: <stable@vger.kernel.org> [v3.4+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-26 15:00:20 +02:00
Takashi Iwai ee48df57c9 ALSA: hda - Fix memory leaks in Realtek & Conexant codec parsers
When moved to the helper code, forgot to release the verb arrays.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-26 14:56:20 +02:00
Linus Torvalds aace99e57c Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab.

Trivial conflict due to new USB HID ID's being added next to each other
(Baanto vs Axentia).

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (44 commits)
  [media] smia: Fix compile failures
  [media]  Fix VIDIOC_DQEVENT docbook entry
  [media] s5p-fimc: Fix control creation function
  [media] s5p-mfc: Fix checkpatch error in s5p_mfc_shm.h file
  [media] s5p-mfc: Fix setting controls
  [media] v4l/s5p-mfc: added image size align in VIDIOC_TRY_FMT
  [media] v4l/s5p-mfc: corrected encoder v4l control definitions
  [media] v4l: mem2mem_testdev: Fix race conditions in driver
  [media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism
  [media] cxd2820r: Fix an incorrect modulation type bitmask
  [media] em28xx: Show a warning if the board does not support remote controls
  [media] em28xx: Add remote control support for Terratec's Cinergy HTC Stick HD
  [media] USB: Staging: media: lirc: initialize spinlocks before usage
  [media] Revert "[media] media: mx2_camera: Fix mbus format handling"
  [media] bw-qcam: driver and pixfmt documentation fixes
  [media] cx88: fix firmware load on big-endian systems
  [media] cx18: support big-endian systems
  [media] ivtv: fix support for big-endian systems
  [media] tuner-core: return the frequency range of the correct tuner
  [media] v4l2-dev.c: fix g_parm regression in determine_valid_ioctls()
  ...
2012-06-25 14:53:09 -07:00
David Henningsson befae82e29 ALSA: hda - Add Realtek ALC280 codec support
This chip looks very similar to ALC269 and ALC27* variants. The bug reporter
has verified that sound was working after this patch had been applied.

Cc: stable@kernel.org
BugLink: https://bugs.launchpad.net/bugs/1017017
Tested-by: Richard Crossley <richardcrossley@o2.co.uk>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 21:24:41 +02:00
Takashi Iwai 55d52ea868 ALSA: hda - Remove obsoleted CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS
I simply forgot to remove this entry although all Realtek quirks have
been dropped.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 14:40:16 +02:00
Jaroslav Kysela 6cab3e1e65 ASoC: wm8994: remove duplicate code
It seems that the code duplication was added at a merge operation.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 11:14:13 +02:00
Clemens Ladisch 74953e2010 ALSA: usb-audio: add BOSS GT-100 support
Reported-by: John McFarland <mcfarljm@gmail.com>
Tested-by: John McFarland <mcfarljm@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 11:11:24 +02:00
Takashi Iwai e6656369da ALSA: hda - Remove suprefluous EAPD init verbs for ALC660vd
The EAPD on nodes 0x14 and 0x15 are initialized in alc_auto_setup_eapd().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 11:03:12 +02:00
Mark Brown d69d65226a ASoC: dwc: Bodge around continuing absence of clock API stubs
The patches for stubbing out the generic clock API still haven't been
applied so we need to either add ifdefs here or add a dependency until
someone decides to actually apply them.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25 10:01:27 +01:00
Mark Brown ec8ffe1868 ASoC: wm8996: Move register default configuration to I2C probe
This gets the registers set up as early as possible, mainly useful for the
GPIOs to ensure that they're in the correct mode.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25 09:55:02 +01:00
Mark Brown d4b3d0fbb7 ASoC: wm8996: Inline wm8996_reset() and optimise cache-only usage
There is only one caller and this allows us to cleanly leave the CODEC
with the internal LDO powered down which is the default state we're
looking for and means that we can robustly disable the register cache
only when we either disable the LDO or power down the external
regulators.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25 09:55:01 +01:00
Mark Brown 625c4888ff ASoC: wm8996: Move regulator notifier callbacks into I2C level
Now that we're using regmap the cache is available here.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25 09:55:00 +01:00
Mark Brown 725e7a7b58 ASoC: wm8904: Move register default setup into I2C probe()
Get it done as early as possible, it's neater and minimises the time the
pins aren't configured as requested.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25 09:55:00 +01:00
Mark Brown 03862cf62e ASoC: wm8904: Move regulator acquisition and device identification to I2C
It's more idiomatic to have the resource allocation at this level.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25 09:53:52 +01:00
Mark Brown fd88759a42 ASoC: wm8904: Rely entirely on the core for bias level management
Even though the WM8904 is able to use idle_bias_off during both probe
and resume we were needlessly leaving the device in standby mode. Instead
power the device down as soon as we've confirmed that we can talk to it
and don't manage the bias level at all over suspend and resume, the core
will take us down to our minimum power level.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25 09:53:43 +01:00
Mark Brown d1e16c1a61 Linux 3.5-rc4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJP53AxAAoJEHm+PkMAQRiGs2QH/RaqkXz96fwjhDcyiKpDqA3c
 kGuS5mz5cOhnqKSmR88HFm6pwuhLux/qSJzeAmoQy1MC8a0ACx7AnANW0lfN3/qe
 /HGYz8h60yCL/fhn8/bUYtdt9xsoDqoDcq/ooFl9mcsJGWbC6WeMSZU5dAUYqviE
 qFrp5zjY07FG53CRGT0hFpezQNwNL+VLH30CF9LD+fJLPVEYum2zBNGXWM42rcw5
 fxzGL/6SO8YqA/Upic1ht6HAd6s5LOrlST7qvnyXUMvRXN5z/Y92ueYJZefkS1Om
 ohuLIKM2bv9/dJS67H8N2baSKGCzBdfSe5/5WaHdLYW9MiVju0wRl6HPJtAMrkk=
 =H8t8
 -----END PGP SIGNATURE-----

Merge tag 'v3.5-rc4' into for-3.6

Linux 3.5-rc4 contains some bug fixes which overlap with new features.
2012-06-25 09:52:59 +01:00
Uwe Kleine-König 1573ee81cb ASoC: dmaengine_pcm: fix typo in comment
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25 09:52:44 +01:00
Takashi Iwai 6e72aa5f51 ALSA: hda - Add inv-dmic model to possible Realtek codecs
For convenience, add "inv-dmic" model string for enabling the inverted
internal mic workaround to possible Realtek codecs, so far,
ALC882-variants, ALC262, ALC268, ALC269-variants, and ALC662-variants.

Also, the model strings for hardware inv-dmic workarounds,
"alc269-dmic" and "alc271-dmic", are added for ALC269(VA) and ALC271
codecs as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:52:25 +02:00
David Henningsson 693b613dc4 ALSA: hda - Add inverted mic quirks for Asus U41SV, Acer 1810TZ and AOD260
These machines have inverted phase on right channel for their
internal mics.

BugLink: https://bugs.launchpad.net/bugs/997227
BugLink: https://bugs.launchpad.net/bugs/996611
BugLink: https://bugs.launchpad.net/bugs/1006089
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 10:20:08 +02:00
Takashi Iwai 125821ae53 ALSA: hda - Add the inverted digital mic workaround to Realtek codecs
Some laptops are equipped with ForteMedia digital mics that give the
differential input.  With such devices, summing stereo streams into a
mono (like PulseAudio does) results in almost silence.

This patch provides a workaround for this bug by adding a new mixer
switch to turn on/off the right channel of digital mic, just like a
similar fix for Conexant codecs.

When the new switch "Inverted Internal Mic Capture Switch" is off and
the current input source is the digital mic, the right channel of the
recording stream is muted.  When another input source is selected, the
right channel is restored.

Tested-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-25 09:45:54 +02:00
Mark Brown 93e8791dd3 ASoC: wm5102: Initial driver
The WM5102 is a highly-integrated low-power audio system for smartphones,
tablets and other portable audio devices based on the Arizona platform.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-23 12:11:47 +01:00
Mark Brown 07ed873e4c ASoC: Add shared code for Wolfson Arizona class devices
The Wolfson Arizona series of audio hub CODECs can share a large amount
of their driver code as the result of a common register map. This patch
adds some of this core support, providing a basis for the initial WM5102
audio driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-23 12:11:46 +01:00
Mark Brown 9dfdd5abcf ASoC: io: Don't dereference regmap if we failed to get one
Avoids a crash in invalid configurations.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-06-23 12:11:32 +01:00
Mark Brown 62d4a4b99d ASoC: dapm: Try to add all routes even if one fails
We may as well print as many errors as we can in one go rather than
requiring developers to iterate through all their typos.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
2012-06-23 12:11:31 +01:00
Mark Brown bb1591b3de ASoC: isabelle: Staticise non-exported isabelle_dai
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-23 12:11:30 +01:00
Mark Brown b2a4ec3d48 ASoC: da732x: Staticise non-exported symbol soc_codec_dev_da732x
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-23 12:11:29 +01:00
Vipin Kumar ace36d8580 ASoC: SPEAr spdif_in: Add spdif IN support
This patch implements the spdif IN driver for ST peripheral

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-23 11:58:10 +01:00
Rajeev Kumar 241b446f30 ASoC: Add support for SPEAr ASoC pcm layer.
This patch add support for the SPEAr ASoC pcm layer in ASoC
framework. The pcm layer uses common snd_dmaengine framework.

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-22 10:27:29 +01:00
Rajeev Kumar 3a9cf8efd7 ASoC: Add support for synopsys i2s controller as per ASoC framework.
This patch add support for synopsys I2S controller as per the ASoC
framework.

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-22 10:25:45 +01:00
Dylan Reid b43d224767 ALSA: hda - Don't power up when not powered down.
After cancel_delayed_work_sync returns, the power down work either never
started (power_on == 1) or finished (power_on == 0).  In the former case
there is no need to power up again.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-22 09:08:58 +02:00
David Henningsson b3c5dce815 ALSA: HDA: Add inverted internal mic quirk for Lenovo S205
The Lenovo Ideapad S205 has an internal mic where the right channel
is phase inverted.

BugLink: https://bugs.launchpad.net/bugs/884652
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-21 17:16:25 +02:00
Takashi Iwai 8e5a050901 ALSA: hda - Fix ALC272X codec detection
The codec ALC272X is a special codec for some Dell machines, and its
detection got broken in the recent kernel because SSID check (required
by ALC272X check) was moved to the later point.  Now we need to move
this codec check to the right place, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-21 15:52:57 +02:00
Scott Jiang f4a6348391 ASoC: bfin: use dev_err to print error log instead of dev_dbg
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-21 11:07:55 +01:00
Takashi Iwai e9ea8e8f22 ALSA: hda - Correct info print in HDMI non-intrinsic unsol event
In the recent code, the value shown there is a tag number, and it's no
longer same as the pin nid.  Correct the message to avoid confusion.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-21 11:42:23 +02:00
Takashi Iwai 9dd8cf125d ALSA: hda - Don't rely on event tag for simple_hdmi
VIA codecs seem not returning the event tag in the unsolicited events,
thus the current code relying on the tag value doesn't work.
Since simple_hdmi stuff has only a single pin, we can use simply
snd_hda_jack_set_dirty_all() to activate the pin-detection
independently from the tag value.

Tested-by: Annie Liu <AnnieLiu@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-21 11:39:45 +02:00
Takashi Iwai 8ceb332df4 ALSA: hda - Remove loop from simple_hdmi*()
The simple_hdmi stuff is designed only for a single pin and a single
converter (thus a single PCM stream), and no need for loops.
Let's flatten the code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-21 08:23:27 +02:00
Lars-Peter Clausen 3528f27a5d ASoC: dmaengine-pcm: Add support for querying stream position from DMA driver
Currently the sound dmaengine pcm helper functions implement the pcm_pointer
callback by trying to count the number of elapsed periods. This is done by
advancing the stream position in the dmaengine callback by one period.
Unfortunately there is no guarantee that the callback will be called for each
elapsed period. It may be possible that under high system load it is only called
once for multiple elapsed periods. This patch addresses the issue by
implementing support for querying the current stream position directly from the
dmaengine driver. Since not all dmaengine drivers support reporting the stream
position yet the old period counting implementation is kept for now.

Furthermore the new mechanism allows to report the stream position with a
sub-period granularity, given that the dmaengine driver supports this.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 15:39:05 +01:00
Lars-Peter Clausen 9883ab229d ASoC: dmaengine-pcm: Rename and deprecate snd_dmaengine_pcm_pointer
Currently the sound dmaengine pcm helper functions implement the pcm_pointer
callback by trying to count the number of elapsed periods. This is done by
advancing the stream position in the dmaengine callback by one period.
Unfortunately there is no guarantee that the callback will be called for each
elapsed period. It may be possible that under high system load it is only called
once for multiple elapsed periods. This patch renames the current implementation
and documents its shortcomings and that it should not be used anymore in new
drivers.

The next patch will introduce a new snd_dmaengine_pcm_pointer which will be
implemented based on querying the current stream position from the dma device.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by Vinod Koul <vinod.koul@linux.intel.com>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 15:38:32 +01:00
Takashi Iwai 8b8d654b55 ALSA: hda - Move one-time init codes from generic_hdmi_init()
The codes to initialize work struct or create a proc interface should
be called only once and never although it's called many times through
the init callback.  Move that stuff into patch_generic_hdmi() so that
it's called only once.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20 16:32:22 +02:00
Takashi Iwai 1ade819181 Merge branch 'fix/hda' into topic/hda
The fix for power sequence needs to be merged back to topic branch.
2012-06-20 14:43:20 +02:00
Scott Jiang f62ae7bda4 ASoC: add i2s dai driver for bf6xx soc
This driver enables i2s mode support on blackfin bf6xx platform.
We reuse bf5xx-i2s-pcm.c as its i2s pcm driver because it's the same
for both bf5xx and bf6xx soc.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 11:26:54 +01:00
Scott Jiang d2aae47f80 ASoC: add sport driver for bf6xx soc
The SPORT(Serial Port) module on bf6xx soc has a totally different ip
comparing to bf5xx soc. An individual SPORT module consists of two
independently configurable SPORT halves with identical functionality.
Each SPORT half can be configured for either transmitter or receiver.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-20 11:26:12 +01:00
Takashi Iwai ccfcf7d151 ALSA: hda - Add missing snd_hda_jack_detect_enable() for simple_hdmi*()
Reported-by: Annie Liu <annieliu@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20 09:30:42 +02:00
Takashi Iwai 21cd683d31 ALSA: hda - Fix the pin nid assignment in patch_hdmi.c
This fixes the regression introduced by the commit d0b1252d for
refactoring simple_hdmi*().  The pin NID wasn't assigned correctly.

Reported-by: Annie Liu <annieliu@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20 09:21:45 +02:00
Ezequiel Garcia 24fe5ddc5f sound: swarm_cs4297: Provide definitions for AC97 registers
This patch removes the last usage of linux/ac97_codec.h by
re-defining used AC97 registers.
We can't use sound/ac97_codec.h here, since it is an OSS driver.

Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20 08:38:27 +02:00
Markus Bollinger fdfbaf69e0 ALSA: pcxhr: Add LTC support
add LTC (linear timecode) read function via proc interface to the pcxhr driver

Signed-off-by: Markus Bollinger <bollinger@digigram.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20 08:35:37 +02:00
Markus Bollinger d7dc9e32ae ALSA: pcxhr: Fix a counter wrap
fix a counter wrap to avoid resynchronization of stream positions every several
minutes. The resynchronization may create stream position jitter

Signed-off-by: Markus Bollinger <bollinger@digigram.com>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20 08:35:28 +02:00
Oleksij Rempel b64a1ba9d3 ALSA: snd_usb_audio: ignore ctrl errors on QuickCam Pro for Notebooks
This webcam works mostly ok, exept with skype.
Skype sends lots of ctrl messages to dynamically ajust
record level. If for some reasons it pokes some error
every thing goes broken:
- first pulseaudio blocks sound for all apps
- then video is reseted
- then skype freez

dmesg has lots of messages like:
cannot set freq 16000 to ep 0x86"

Setting ignore_ctl_error=1 fixes this problem.

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20 08:29:08 +02:00
Oleksij Rempel 05b9afd5b7 ALSA: snd_usb_audio: ignore ctrl errors on QuickCam E3500
if this cam is pluged in, pulse audio can't initiate capture
device.
dmesg has lots of messages like:
"cannot set freq 16000 to ep 0x86"

Setting ignore_ctl_error=1 fixes this problem.

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-20 08:28:57 +02:00
Boojin Kim 21c4afed6a ASoC: follow the updated samsung DMA common operations
This patch uses config() function to configure DMA
transmit options.

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-06-20 08:09:14 +09:00
Mark Brown 629b15b95d ASoC: wm5100: Remove stubs of ASoC-level register map code
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-19 12:43:26 +01:00
Hans Verkuil 54f6019b58 [media] S_HW_FREQ_SEEK: set capability flags and return ENODATA instead of EAGAIN
Set the new capability flags in G_TUNER and return ENODATA if no channels
were found.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18 20:52:51 -03:00
Ezequiel Garcia e0815f35cc ALSA: maestro3: Remove unused AC97 register definitions
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-18 16:05:28 +02:00
Ondrej Zary 10a3061acc ALSA: snd-opti9xx: fixes for MED3931 card (opti931)
MED3931 card did not work (failed with "OPTI chip not found") because
snd-opti9xx gets mc_indir_index from pnp by adding 2 to the pnp-reported port.
It probably works for some cards but not for this one. Datasheet says that
the port is always at 0xe?e so just force the lowest nibble to be 0xe.

Also this card powers up with (ugly) 3D sound enabled. As there's no mixer
control for this, just disable it.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-18 09:39:38 +02:00
Dimitris Papastamos 4be77a530b ALSA: pcm: Add snd_pcm_rate_bit_to_rate()
This is essentially the reverse of snd_pcm_rate_to_rate_bit().

This is generally useful as the Compress API uses the rate bit
directly and it helps to be able to map back to the actual sample
rate.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-18 09:38:58 +02:00
Daniel Mack 0b1d8e0908 ALSA: 6fire: use NULL instead of 0 for pointer assignment
Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: Torsten Schenk <torsten.schenk@zoho.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-18 09:36:38 +02:00
Dylan Reid b4a91cf05c ALSA: hda - Handle open while transitioning to D3.
This addresses an issue encountered when a pcm is opened while
transitioning to low power state (codec->power_on == 1 &&
codec->power_transition == -1).  Add snd_pcm_power_up_d3wait to
hda_codec.  This function is used to power up from azx_open as opposed
to snd_hda_power_up used from codec_exec_verb. When powering up from
azx_open, wait for pending power downs to complete, avoiding the power
up continuing in parallel with the power down on the work queue.

The specific issue seen was with the CS4210 codec, it powers off the ADC
and DAC nid in its suspend handler.  If it is re-opened before the
~100ms power down process completes, the ADC and DAC nid are initialized
while powered down and audio is lost until another suspend/resume cycle.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-18 09:35:21 +02:00
Daniel Mack afe25967ec ALSA: snd-usb: make snd_usb_substream_capture_trigger static
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-18 09:32:53 +02:00
Daniel Mack 7fb75db139 ALSA: snd-usb: fix sync pipe check
Fix a bogus sanity check for sync pipe in pcm.c. This flaw was
introduced during the streaming logic refactorization.

While at it, improve the error messages that are generated in such cases.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-and-tested-by: <ben@b1c1l1.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-18 08:36:36 +02:00
Takashi Iwai ef890ae9b3 ASoC: Updates for 3.5
All driver specific and fairly small.  The pxa-ssp changes are larger
 than I'd like but they're build failures and are pretty clear to
 inspection.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJP3kOeAAoJEBus8iNuMP3dpf0QAJLZjq1Ttzcm2ZrtYkr6edgm
 axHhApj6ptOlLqb16zCJ+zjgmjUy/GteJg766KZqAkvMJxWSPRaPr/aTQnWlxUAE
 CU/WjdywbVPKIkn5/r+jpEOifsHNTzj14/gF1Cn9V+58pN6YgflmfElV2vFe3rdX
 IrNxGfRBHDgHwqDbHTi2OL8xUTE4oJnnhQZxk7FcsYKiwpwB2hVkbrTTKGNBPL4d
 DoV8Xcy+Zb12iDQwh9BvzYAznQTQwCjGsF11UVAb0ChTV14XExQTABNZnAL3hgfj
 AhBtm/coDmym61AvQMddsbg8Hrlp/d9Qzmr+0Fxj9HBb+SGVt9XlHY3ETePBM4hQ
 wIjhedCed4Pv/Jb9IYDzQ1wJD/9iDG+Xuyj1iQC1QQKaoKg6eI9QgTLoVwRHCssg
 DVTzFPOFEFiIfI+eH2cLyZZZlWL1LDbeVmH+KvWthb6+mbfOXo/VPlely2Odl+b7
 NErfdjbggoc4Oy8o4Lo0XMb/6HxE7tHd/AzbKHdeHjNk8BCn5NCrdOLSuJb3xrr5
 8fLP/0T9Z955R6YsHNg88rhQ74QhWSLGvs9TjUw7sRHN9xkC4gQIwcJ5i0dZcXjC
 zIdP0Lj8XB0FdDGYNALdy2B48jU1uKs0cGW+xV/Z0uA0QllB0pfFy+O49z+jRKzJ
 d/cIeM8hsxyOHWS4y+BJ
 =67R8
 -----END PGP SIGNATURE-----

Merge tag 'asoc-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for 3.5

All driver specific and fairly small.  The pxa-ssp changes are larger
than I'd like but they're build failures and are pretty clear to
inspection.
2012-06-18 08:36:00 +02:00
Dan Carpenter 9f0ed7a7c5 ASoC: Ux500: unlock on an error path
There is a missing mutex_unlock() here.  The cleanup path also has more
debug output.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-17 20:48:44 +01:00
Ola Lilja e0690385a8 ASoC: Ux500: Add machine-driver
Add machine-driver for ST-Ericsson U8500 platform, including
support for the AB8500-codec.

Signed-off-by: Ola Lilja <ola.o.lilja@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-17 20:46:12 +01:00
Takashi Iwai 250e41ac9f ALSA: hda - Enable unsol event for ATI and Nvidia HDMI codecs too
ATI and Nvidia HDMI codecs have also the pin-detection capability,
so let's enable the jack-detecion for them, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-15 14:42:06 +02:00
Takashi Iwai ceaa86ba2e ALSA: hda - Remove invalid init verbs for Nvidia 2ch codecs
Nvidia 2ch codecs have no NIDs greather than 0x05.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-15 14:41:59 +02:00
Takashi Iwai d0b1252dd1 ALSA: hda - Use common codes for ATI, Nvidia and VIA simple codecs
The code refactoring using the same helper functions for sharing the
codes among ATI, Nvidia and VIA simple_hdmi* stuff.  Except for that
spec->pcm_playback is no longer pointer, the functionality doesn't
change.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-15 14:36:20 +02:00
Takashi Iwai 4f0110ced1 ALSA: hda - Merge ATI/VIA HDMI simple init functions
Just a minor code cleanup to use the same function for both AMD and VIA
simple_hdmi*().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-15 12:53:39 +02:00
Takashi Iwai 4b6ace9e71 ALSA: hda - Add the support for VIA HDMI pin detection
This patch adds the hotplug unsol event handling to simple_hdmi*().
It works on VIA VX900.  If AMD or Nvidia chips support the
pin-detection similarly, it can be added easily, too.

Reported-by: Annie Liu <annieliu@viatech.com.cn>
Tested-by: Annie Liu <annieliu@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-15 11:53:32 +02:00
Seth Heasley c20c5a841c ALSA: hda_intel: activate COMBO mode for Intel client chipsets
This patch activates the COMBO position_fix for recent Intel client chipsets.
COMBO mode is the recommended setting for Intel chipsets and eliminates HD
audio warnings in dmesg.  This patch has been tested on Lynx Point, Panther
Point, and Cougar Pont.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-15 10:28:16 +02:00
David Henningsson 80c8bfbe76 ALSA: HDA: Create phantom jacks for fixed inputs and outputs
PulseAudio sometimes have difficulties knowing that there is a
"Speaker" or "Internal Mic", if they have no individual volume
controls or selectors. As a result, only e g "Headphone" might
be created for a laptop, but no "Speaker".
To help out, create phantom jacks (that are always present,
at least for now) for "Speaker", "Internal Mic" etc, in case we
detect them.
The naming convention is e g "Speaker Phantom Jack".

In order not to pollute the /dev/input namespace with even more
devices, these are added to the kcontrols only, not the input devices.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-14 12:59:35 +02:00
Takashi Iwai 2e8b2b29d1 ALSA: hda - Don't forget to call init verbs added by fixup list
During the split to the auto-parser helper functions, the actual call
of init verbs was lost.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43366

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-13 16:47:32 +02:00
Stephen Warren 62ae68fa5d ASoC: probe CODECs and platforms before DAIs and links
soc_probe_dai_link() currently inter-mixes the probing of CODECs,
platforms, and DAIs. This can lead to problems such as a CODEC's DAI
being probed before the CODEC, if that DAI is used as the CPU-side of
a DAI link without any other of the CODEC's DAIs having been used as
the CODEC-side of any DAI link that was probed earlier.

To solve this, split soc_probe_dai_link() into soc_probe_link_components()
and soc_probe_link_dais(). The former is used to probe all CODECs and
platforms used by a card first, and then the latter is used to probe all
the DAIs and links later.

A similar change is made to soc_remove_dai_links().

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-13 13:18:05 +01:00
Stephen Warren d12cd198cb ASoC: factor out soc_remove_platform()
This change simply factors out part of soc_remove_dai_link() into a
standalone function. This makes platform and CODEC removal much more
similar at the call-sites.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-13 13:18:04 +01:00
Stephen Warren 18d756440e ASoC: when removing a CPU DAI, clean up its DAPM context
When a standalone CPU DAI (one not part of a CODEC) is probed, widgets
are created for it. Add a call to snd_soc_dapm_free() in order to clean
these up when the CPU DAI is removed.

In order for snd_soc_dapm_free() to work, the CPU DAI's DAPM context's
list member must be initialized, since snd_soc_dapm_free() removes that
from the list it's part of. Add it to the card's list of DAPM contexts.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-13 13:18:04 +01:00
Stephen Warren a9db7dbee0 ASoC: when initializing CPU DAI, don't duplicate any CODEC init
If the CPU-side of a DAI link is a CODEC rather than a standalone DAI,
the codec initialization will call try_module_get() and create the DAI
widgets. Ensure that this isn't duplicated when the CPU DAI itself is
probed, if the CPU DAI is part of a CODEC.

Note that this is not a complete fix on its own, since there's no
guarantee that the CODEC itself will be initialized - currently that only
happens if the CODEC is also used as the CODEC-side of a DAI link, and
that initialization may happen before or after the DAIs within the CODEC
are initialized. However, such a scenario doesn't necessarily currently
work, and I don't think this change alone makes it any worse. This is
fixed in a couple patches time.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-13 13:18:04 +01:00
Qiao Zhou b883f36349 ASoC: add ttc-dkb machine support
add ttc-dkb machine support for pxa910. It uses 88pm8607 as codec
dai, mmp-pcm as platform and pxa-ssp as cpu dai.

Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-13 13:16:14 +01:00
Zhangfei Gao 5ebf20ae28 ASoC: add mmp brownstone support
Adds Alsa audio platform driver for mmp brownstone machine

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Leo Yan <leoy@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-13 13:16:13 +01:00
Zhangfei Gao fa375d42f0 ASoC: mmp: add sspa support
The SSPA is a configurable multi-channel audio serial (TDM) interface.
It's configurable at runtime to support up to 128 channels and the
number of bits per sample: 8, 12, 16, 20, 24 and 32 bits. It also
support stereo format: I2S, left-justified or right-justified.

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Leo Yan <leoy@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-13 13:13:39 +01:00
Zhangfei Gao 7a824e214e ASoC: mmp: add audio dma support
mmp-pcm handle audio dma based on soc-dmaengine
Support mmp and pxa910

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Leo Yan <leoy@marvell.com>
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-13 13:13:37 +01:00
Axel Lin 8994a5e1d2 ASoC: ml26124: Convert to devm_regmap_init_i2c
This fixes a leak if snd_soc_register_codec fails.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-13 17:27:27 +08:00
Ola Lilja 85f243912b ASoC: Ux500: Correct license strings
GPLv2 -> GPL v2

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ola Lilja <ola.o.lilja@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-13 17:22:41 +08:00
Prashant Gaikwad 65d2bdd343 ASoC: tegra: add clk_prepare/clk_unprepare
Use clk_prepare/clk_unprepare as required by the generic clk framework.

Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-12 10:32:56 -06:00
David Henningsson edfe3bfc1b ALSA: HDA: Pin fixup for Zotac Z68 motherboard
Pin 0x1b was connected to the front panel connector, which according to
the HDA standard should contain a mic and a headphone. In this case,
the headphone was listed as "line out" by BIOS.

Cc: stable@kernel.org
BugLink: https://bugs.launchpad.net/bugs/993162
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-12 17:55:46 +02:00
Vinod Koul 8b21460ac6 ALSA: compress_core: cleanup pointers on stop
as the start can be called after stop again, we need to reset state

Signed-off-by: Namarta Kohli <namartax.kohli@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-12 17:55:02 +02:00
Vinod Koul 6b18f79399 ALSA: compress_core: don't wake up on pause
during pause the core should maintain the status-quo on the device and pointers
and not wake up. If app needs it should call DROP explcitly.

Signed-off-by: Namarta Kohli <namartax.kohli@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-12 17:54:42 +02:00
Stephen Warren 3419ae781f ASoC: tegra+wm8903: turn of mic detect when card is removed
If mic detect is left enabled and the WM8903 detects a status change,
the WM8903 driver will make a callback against the free()d jack, which
will cause a crash.

This problem can be triggered by fully initializing an audio card, then
removing and re-inserting the machine driver module.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-12 11:38:48 +08:00
Mark Brown a89c3e956a ASoC: wm8903: Move register default changes to I2C probe
Also convert to use update_bits() while we're at it. No great need to do
this, it's just a bit neater to do as much as possible in the I2C probe.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2012-06-12 09:00:12 +08:00
Mark Brown b7c95d9146 ASoC: wm8903: Move interrupt request to I2C probe
There's no reason to defer requesting of the interrupt until the CODEC
probe and doing so results in more work if we hit an error as we'll have
registered the CODEC with the core. It's neater to acquire as many of the
resources we'll need as we can in the bus probe function.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2012-06-12 09:00:03 +08:00
Mark Brown e373cbfb2f ASoC: wm8903: Make interrupt handler use regmap directly
There's no urgent need for the interrupt handler to use the ASoC I/O
functions and it'll support a further move in where we request the
interrupt so call the regmap APIs directly.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2012-06-12 08:59:59 +08:00
Mark Brown 20c5fd3994 ASoC: wm8903: Move pin configuration into I2C probe() function
Ensure that the device pins are configured as soon as possible by moving
the pin configration (including MICBIAS) into the I2C probe() function.
This had been done in the CODEC probe() function when we were relying on
the ASoC register I/O code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2012-06-12 08:59:46 +08:00
Hans de Goede 40e006aea8 [media] snd_tea575x: set_freq: update cached freq to the actual achieved frequency
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
CC: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 16:04:12 -03:00
Hans de Goede 5daf53a6eb [media] snd_tea575x: Make the module using snd_tea575x the fops owner
Before this patch the owner field of the /dev/radio# device fops was set to
the snd-tea575x-tuner module itself. Meaning that the module which was using
it could be rmmod-ed while the device is open, and then BAD things happen.

I know, as I found out the hard way :)

Note that there is no need to also somehow increase the refcount of the
snd-tea575x-tuner module itself, since any drivers using it will have
symbolic references to it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
CC: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 16:02:54 -03:00
Hans de Goede 0875eb755b [media] snd_tea575x: Report correct frequency range for EU/US versus JA models
My EU/US 5757 cannot tune below approx 86 Mhz, that is below that it
does not even generate the standard not tuned to anything radio noise anymore,
so clearly the 5757 cannot tune to the Japanese frequencies. This patch
assumes that likewise the 5759 cannot tune to the EU/US frequencies.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
CC: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 16:02:15 -03:00
Stephen Warren 0336553e4a ASoC: tegra: simplify Kconfig dependencies
The Tegra ASoC machine drivers only depend on Tegra architecture support
to compile, not specific board support. Remove Kconfig dependencies on
any particular board. This is required since Kconfig options for boards
are going away given the migration to device tree.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11 11:48:43 -06:00
Takashi Iwai f2a8ecaf6d ALSA: hda - Fix detection of Creative SoundCore3D controllers
The PCI ID entries of Creative SoundCore3D HD-audio controllers should
be before the wildcard for vendor = Creative.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-11 15:51:54 +02:00
Adam Thomson 48e2787460 ASoC: codecs: Add DA732x codec driver
This patch adds support for Dialog DA732x audio codecs.

Signed-off-by: Michal Hajduk <Michal.Hajduk@diasemi.com>
Signed-off-by: Adam Thomson <Adam.Thomson@diasemi.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11 20:23:55 +08:00
Mark Brown af691fb62c ASoC: wm8996: Convert to devm_regmap_init_i2c()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11 20:22:26 +08:00
Mark Brown 66c2b7377a ASoC: wm8996: Remove write sequencer registers from the defaults table
They aren't marked as readable and the feature is never used so they'll
never get referenced.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11 20:22:12 +08:00
Mark Brown 9c699e0a95 ASoC: wm8996: Mark the CODEC as cache only when powering off on boot
Otherwise we might try to write to a powered off device.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11 20:20:51 +08:00
Mark Brown db13340983 ASoC: wm8996: Move reset before the initial regulator disable
If we don't have control over the LDO but do have control over the other
regulators then we may end up trying to write to a powered off device.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11 20:20:38 +08:00
Mark Brown 90ba6859ce ASoC: wm8996: Remove spurious regulator_bulk_free()
We're using demv_regulator_bulk_get() so don't need to manually free and
this is in the CODEC driver not the I2C driver anyway.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11 20:20:22 +08:00
Mark Hills 989b01385f ALSA: usb-audio: Convert table to preferred C99 format
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-11 12:49:56 +02:00
Mark Hills b71dad181a ALSA: usb-audio: Use a table of mixer controls
Allow mixer controls to be provided clearly in a table, to avoid
quantity of error checking at each use.

Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-11 12:49:43 +02:00
Annie Liu 3de5ff8877 ALSA: hda - add support for HD-Audio CODECes of VIA HDMI GFX Cards
This is patch supporting the CODECes of HD-Audio function of VIA GFX
cards which support HDMI.
For CODECes 0x9f80/0x9f81, which belong to VX900, since the hardware
is not fully compliant to HD-Audio 1.3, simple_i*() is adopted
temporarily.

Signed-off-by: Annie Liu <annieliu@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-11 12:47:31 +02:00
Annie Liu 754fdff86f ALSA: hda - add support for HD-Audio of VIA HDMI GFX Cards
This is patch supporting HD-Audio function of VIA GFX cards which
support HDMI.
Those are integrated graphics of chipsets VX900 and VX11 separately.

Signed-off-by: Annie Liu <annieliu@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-11 12:47:15 +02:00
Ola Lilja 679d7abdc7 ASoC: codecs: Add AB8500 codec-driver
Add codec-driver for ST-Ericsson AB8500 mixed-signal ASIC.

Signed-off-by: Ola Lilja <ola.o.lilja@stericsson.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11 13:19:02 +08:00
Mark Brown c1b88ee2bb ASoC: wm8904: Fix cache only management
We should be using the regmap API consistently for all the cache only
configuration and we should be going cache only before we power down
the supplies.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11 13:17:38 +08:00
Mark Brown 433897f740 ASoC: wm8904: Fix GPIO and MICBIAS initialisation for regmap conversion
We no longer have a flat ASoC cache so can't peer directly into the array
any more but should instead use the register I/O functions to update the
cache.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org (v3.4)
2012-06-11 13:11:40 +08:00
Qiao Zhou 972a55b62d ASoC: fix pxa-ssp compiling issue under mach-mmp
pxa-ssp.c uses API like cpu_is_pxa3xx(), cpu_is_pxa2xx(), which is
defined under arch-pxa architecture, and drivers under mach-mmp
can't find it. so just use ssp->type to replace that API.

Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-11 12:26:15 +08:00
Mark Brown d633edd95d ASoC: wm8904: Convert to devm_regmap_init_i2c()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-09 12:07:41 +08:00
Mark Brown 8cb28fd6d1 ASoC: wm8904: Convert to module_i2c_driver()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-09 12:07:32 +08:00
Mark Brown 7d11668494 ASoC: wm8903: Convert to devm_regmap_init_i2c()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-09 12:07:19 +08:00
Steven Newbury 8393ec4a13 ALSA: hda - HDMI Audio init all connectors when VGA-switcheroo is off
When VGA_SWITCHEROO support is enabled hda_intel initialises the HDMI
audio device on the current VGA device.  When it's not enabled it only
initialises the HDMI device on the default VGA adaptor, this means
secondary cards get no audio support which is very unhelpful for
multi-seat!

With this patch, when SUPPORT_VGA_SWITCHEROO is disabled hda_intel
initialises all HDMI audio devices, not just the default VGA.

[minor optimizations by tiwai]

Signed-off-by: Steven Newbury <steve@snewbury.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-08 13:07:41 +02:00
Takashi Iwai 12b78a7f67 ALSA: hda - Fix uninitialized HDMI controllers with VGA-switcheroo
When VGA-switcheroo is built in but unused on systems with multiple
graphics cards, the initializations of non-default graphics cards are
skipped and never enabled (because the switcheroo is activated only
when the controller supports).  The current behavior is for avoiding
the system lockup by accessing the disabled GPU, but due to the recent
change in VGA-switcheroo, it determines the state simply by checking
with the default VGA device.  This is the culprit.

Now with the new vga_switcheroo_get_client_state(), we can know the
initial state of the bound GPU, thus can determine the initial audio
client state more correctly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-08 11:24:19 +02:00
Takashi Iwai 8260ef075b ALSA: usb-audio: Fix substream assignments
In 3.5 kernel, the endpoint is assigned dynamically for the
substreams, but the PCM assignment still checks the presence of the
endpoint pointer.  This ended up in duplicated PCM substream creations
at probing time, resulting in kernel warnings like:

WARNING: at fs/proc/generic.c:586 proc_register+0x169/0x1a6()
Pid: 1152, comm: modprobe Not tainted 3.5.0-rc1-00110-g71fae7e #2
Call Trace:
 [<ffffffff8102a400>] warn_slowpath_common+0x83/0x9c
 [<ffffffff8102a4bc>] warn_slowpath_fmt+0x46/0x48
 [<ffffffff813829ad>] ? add_preempt_count+0x39/0x3b
 [<ffffffff811292f0>] proc_register+0x169/0x1a6
 [<ffffffff8112962e>] create_proc_entry+0x74/0x8c
 [<ffffffffa018eb63>] snd_info_register+0x3e/0xc3 [snd]
 [<ffffffffa01fde2e>] snd_pcm_new_stream+0xb1/0x404 [snd_pcm]
 [<ffffffffa024861f>] snd_usb_add_audio_stream+0xd2/0x230 [snd_usb_audio]
 [<ffffffffa0241d33>] ? snd_usb_parse_audio_format+0x252/0x34f [snd_usb_audio]
 [<ffffffff810d6b17>] ? kmem_cache_alloc_trace+0xab/0xbb
 [<ffffffffa0248c29>] snd_usb_parse_audio_interface+0x4ac/0x567 [snd_usb_audio]
 [<ffffffffa023f0ff>] snd_usb_create_stream+0xe9/0x125 [snd_usb_audio]
 [<ffffffffa023f9b1>] usb_audio_probe+0x62a/0x72c [snd_usb_audio]
 .....

This patch fixes the regression by checking the fixed endpoint number
for each substream instead of the endpoint pointer.

Reported-and-tested-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-08 09:01:37 +02:00
Wang Xingchao 09617ce477 ALSA: hda - power setting error check
codec may reject power state transition requests(reporting PS-ERROR set),
in that case we re-issue a power state setting and check error bit again.

Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-08 09:00:37 +02:00
Stephen Warren 69c5b75306 ASoC: tegra: add MODULE_DEVICE_TABLE to tegra30_ahub
This allows the module to automatically load when instantiated from
device tree.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08 08:49:30 +08:00
Stephen Warren 0f163546a7 ASoC: tegra: use regmap more directly
Stop open-coding the caching of the ctrl registers; instead, use
regmap_update_bits() to update parts of the register from different
places. The removal of the open-coded cache will allow controls to be
created which touch registers, which will be necessary if any of these
modules are converted to CODECs.

Get rid of tegra*_read/write; just call regmap_read/write directly.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08 07:03:14 +08:00
Stephen Warren c92a40e3a1 ASoC: tegra: use DAI's not card's dev for dev_err
This is the actual device of the I2S or SPDIF controller reporting the
problem. If a future change converts these controllers to be CODECs, then
there may be no pcm associated with the substream, so this change avoids
a crash.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08 07:03:05 +08:00
Stephen Warren 40db77a0c4 ASoC: tegra: remove usage of rtd->codec
rtd->codec_dai->codec can be used instead.

This is a slight step along the way to not needing the rtd->codec field
any more.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08 07:02:29 +08:00
Stephen Warren 408dafc423 ASoC: tegra: statically define DAI link format
Define the DAI format statically in the dai_link, rather than executing
code to set it each time the hw params are set.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08 07:02:29 +08:00
Stephen Warren 9515c1010c ASoC: tegra: add .stream_name to CPU DAIs
This is certainly required if the I2S and SPDIF controllers are converted
to be CODECs, and is probably good practice irrespective.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08 07:02:28 +08:00
Mark Brown 3ff1ec27e9 ASoC: wm2000: Always use a 4s timeout for the firmware
Rather than having varying timeouts depending on the transition always
use a 4s timeout. This provides better diagnostics for clocking errors
and ensures compatibility with current calibration firmwares.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08 07:00:13 +08:00
Dan Carpenter 40820105d4 ASoC: isabelle: using an uninitialized variable
We should set "isabelle_regmap" before using it.  GCC complains.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08 06:58:44 +08:00
Liam Girdwood 90c6ce0d54 ASoC: dapm: Fix input list to use source widgets
We should only add source widgets to the input list.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08 06:56:41 +08:00
Liam Girdwood 35ea0655a1 ASoC: dpcm: Fix dpcm_get_be() to check that DAI is BE
Make sure that the dpcm_get_be() only returns BE DAI links.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08 06:56:38 +08:00
Mark Brown a265367ccb ASoC: max98095: Staticise non-exported functions and export jack detect
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08 05:47:19 +08:00
Wang Xingchao e076eb5c95 ALSA: hda - check proper return value
snd_hda_param_read() return value -1 means error, others are responses

Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-06-07 11:40:58 +02:00