two patches, both in drivers. One is a fix to FC recovery (lpfc) and
the other is an enhancement to support the Intel Alder Motherboard
with the UFS driver which comes under the -rc exception process for
hardware enabling.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYat3yyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbwKAP9yj4Da
52hzcLcbjT6Z0SurmLrGd4fTaAinSDueSGvh5wEA/QDugzP7CEnogk9S7cAfJLQf
QO1HhyRn6Vx+0r57Cj0=
=0aRn
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two patches, both in drivers.
One is a fix to FC recovery (lpfc) and the other is an enhancement to
support the Intel Alder Motherboard with the UFS driver which comes
under the -rc exception process for hardware enabling"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-pci: Add support for Intel ADL
scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGO
Misc fixes all over the place.
Revert of virtio used length validation series: the approach taken does
not seem to work, breaking too many guests in the process. We'll need to
do length validation using some other approach.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmGe0sEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp8WEH/imDIq1iduDeAuvFnmrm5eEO9w3wzXCT4NiG
8Pla241FzQ1pEFEAne16KP0+SlLhj7P0oc5FR8vkYvxxuyneDbCzcS2M1kYMOpA1
ry28PuObAnekzE/WXxvC031ozB5Zb/FL54gmw+/1EdAOdMGL0CdQ1aJxREBHRTBo
p4ZHr83GA2D2C/IyKCsgQ8cB9ZrMqImTQQ4vRD89HoFBp+GH2u2Di1iyXEWuOqdI
n1+7M9jjbyW8A+N1bkOicpShS/6UcyJQOOcg8kvUQOV6srVkYhfaiWC/CbOP2g73
8PKK+/K2Htf92s6RdvDUPSKmvqGR/4KPZWPtWThXBYXGgWul0uI=
=q6tO
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vhost,virtio,vdpa bugfixes from Michael Tsirkin:
"Misc fixes all over the place.
Revert of virtio used length validation series: the approach taken
does not seem to work, breaking too many guests in the process. We'll
need to do length validation using some other approach"
[ This merge also ends up reverting commit f7a36b03a7 ("vsock/virtio:
suppress used length validation"), which came in through the
networking tree in the meantime, and was part of that whole used
length validation series - Linus ]
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa_sim: avoid putting an uninitialized iova_domain
vhost-vdpa: clean irqs before reseting vdpa device
virtio-blk: modify the value type of num in virtio_queue_rq()
vhost/vsock: cleanup removing `len` variable
vhost/vsock: fix incorrect used length reported to the guest
Revert "virtio_ring: validate used buffer length"
Revert "virtio-net: don't let virtio core to validate used length"
Revert "virtio-blk: don't let virtio core to validate used length"
Revert "virtio-scsi: don't let virtio core to validate used buffer length"
This reverts commit c57911ebfb.
Attempts to validate length in the core did not work out. We'll drop
them for now, so revert the dependent changes in drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A commit introduced formal regstration of all Fabric nodes to the SCSI
transport as well as REG/UNREG RPI mailbox requests. The commit introduced
the NLP_RELEASE_RPI flag for rports set in the lpfc_cmpl_els_logo_acc()
routine to help clean up the RPIs. This new code caused the driver to
release the RPI value used for the remote port and marked the RPI invalid.
When the driver later attempted to re-login, it would use the invalid RPI
and the adapter rejected the PLOGI request. As no login occurred, the
devloss timer on the rport expired and connectivity was lost.
This patch corrects the code by removing the snippet that requests the rpi
to be unregistered. This change only occurs on a node that is already
marked to be rediscovered. This puts the code back to its original
behavior, preserving the already-assigned rpi value (registered or not)
which can be used on the re-login attempts.
Link: https://lore.kernel.org/r/20211123165646.62740-1-jsmart2021@gmail.com
Fixes: fe83e3b9b4 ("scsi: lpfc: Fix node handling for Fabric Controller and Domain Controller")
Cc: <stable@vger.kernel.org> # v5.14+
Co-developed-by: Paul Ely <paul.ely@broadcom.com>
Signed-off-by: Paul Ely <paul.ely@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a reset is requested the position of the write pointer is updated but
the data in the corresponding zone is not cleared. Instead scsi_debug
returns any data written before the write pointer was reset. This is an
error and prevents using scsi_debug for stale page cache testing of the
BLKRESETZONE ioctl.
Zero written data in the zone when resetting the write pointer.
Link: https://lore.kernel.org/r/20211122061223.298890-1-shinichiro.kawasaki@wdc.com
Fixes: f0d1cf9378 ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This fixes an issue added in commit 4edd8cd4e8 ("scsi: core: sysfs: Fix
hang when device state is set via sysfs") where if userspace is requesting
to set the device state to SDEV_RUNNING when the state is already
SDEV_RUNNING, we return -EINVAL instead of count. The commmit above set ret
to count for this case, when it should have set it to 0.
Link: https://lore.kernel.org/r/20211120164917.4924-1-michael.christie@oracle.com
Fixes: 4edd8cd4e8 ("scsi: core: sysfs: Fix hang when device state is set via sysfs")
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For updating the IOC firmware's timestamp with system timestamp, the driver
issues the Mpi26IoUnitControlRequest message. While framing the
Mpi26IoUnitControlRequest, the driver should copy the lower 32 bits of the
current timestamp into IOCParameterValue field and the higher 32 bits into
Reserved7 field.
Link: https://lore.kernel.org/r/20211117123215.25487-1-sreekanth.reddy@broadcom.com
Fixes: f98790c003 ("scsi: mpt3sas: Sync time periodically between driver and firmware")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While determining the SAS address of a drive, the driver checks whether the
handle number is less than the HBA phy count or not. If the handle number
is less than the HBA phy count then driver assumes that this handle belongs
to HBA and hence it assigns the HBA SAS address.
During IOC firmware downgrade operation, if the number of HBA phys is
reduced and the OS drive's device handle drops below the phy count while
determining the drive's SAS address, the driver ends up using the HBA's SAS
address. This leads to a mismatch of drive's SAS address and hence the
driver unregisters the OS drive and the system goes into read-only mode.
Update the IOC's num_phys to the HBA phy count provided by actual loaded
firmware.
Link: https://lore.kernel.org/r/20211117105058.3505-1-sreekanth.reddy@broadcom.com
Fixes: a5e99fda01 ("scsi: mpt3sas: Update hba_port objects after host reset")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While looping over shost's sdev list it is possible that one
of the drives is getting removed and its sas_target object is
freed but its sdev object remains intact.
Consequently, a kernel panic can occur while the driver is trying to access
the sas_address field of sas_target object without also checking the
sas_target object for NULL.
Link: https://lore.kernel.org/r/20211117104909.2069-1-sreekanth.reddy@broadcom.com
Fixes: f92363d123 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This was found by coccicheck:
./drivers/scsi/ufs/ufs-mediatek.c, 211, 1-7, ERROR missing put_device;
call of_find_device_by_node on line 1185, but without a corresponding
object release within this function.
Link: https://lore.kernel.org/r/20211110105133.150171-1-ye.guojin@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The > comparison needs to be >= to prevent accessing one element beyond the
end of the app_reply->ports[] array.
Link: https://lore.kernel.org/r/20211109115219.GE16587@kili
Fixes: 7878f22a2e ("scsi: qla2xxx: edif: Add getfcinfo and statistic bsgs")
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following sparse warnings in ufshpb_set_hpb_read_to_upiu():
sparse warnings: (new ones prefixed by >>)
drivers/scsi/ufs/ufshpb.c:335:27: sparse: sparse: cast from restricted __be64
drivers/scsi/ufs/ufshpb.c:335:25: sparse: expected restricted __be64 [usertype] ppn_tmp
drivers/scsi/ufs/ufshpb.c:335:25: sparse: got unsigned long long [usertype]
Link: https://lore.kernel.org/r/20211111222452.384089-1-huobean@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCM changes set the flags in mcp->out_mb instead of mcp->in_mb so the
data was not actually being read into the mcp->mb[] array from the adapter.
Link: https://lore.kernel.org/r/20211108183012.13895-1-emilne@redhat.com
Fixes: 9f2475fe74 ("scsi: qla2xxx: SAN congestion management implementation")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
hba->outstanding_tasks, which is read under host_lock spinlock, tells the
interrupt handler what task management tags are in use by the driver. The
doorbell register bits indicate which tags are in use by the hardware. A
doorbell bit that is 0 is because the bit has yet to be set by the driver,
or because the task is complete. It is only possible to disambiguate the 2
cases, if reading/writing the doorbell register is synchronized with
reading/writing hba->outstanding_tasks.
For that reason, reading REG_UTP_TASK_REQ_DOOR_BELL must be done under
spinlock.
Link: https://lore.kernel.org/r/20211108064815.569494-3-adrian.hunter@intel.com
Fixes: f5ef336fd2 ("scsi: ufs: core: Fix task management completion")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
__ufshcd_issue_tm_cmd() clears req->end_io_data after timing out, which
races with the completion function ufshcd_tmc_handler() which expects
req->end_io_data to have a value.
Note __ufshcd_issue_tm_cmd() and ufshcd_tmc_handler() are already
synchronized using hba->tmf_rqs and hba->outstanding_tasks under the
host_lock spinlock.
It is also not necessary (nor typical) to clear req->end_io_data because
the block layer does it before allocating out requests e.g. via
blk_get_request().
So fix by not clearing it.
Link: https://lore.kernel.org/r/20211108064815.569494-2-adrian.hunter@intel.com
Fixes: f5ef336fd2 ("scsi: ufs: core: Fix task management completion")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This fixes a regression added with:
commit f0f82e2476 ("scsi: core: Fix capacity set to zero after
offlinining device")
The problem is that after iSCSI recovery, iscsid will call into the kernel
to set the dev's state to running, and with that patch we now call
scsi_rescan_device() with the state_mutex held. If the SCSI error handler
thread is just starting to test the device in scsi_send_eh_cmnd() then it's
going to try to grab the state_mutex.
We are then stuck, because when scsi_rescan_device() tries to send its I/O
scsi_queue_rq() calls -> scsi_host_queue_ready() -> scsi_host_in_recovery()
which will return true (the host state is still in recovery) and I/O will
just be requeued. scsi_send_eh_cmnd() will then never be able to grab the
state_mutex to finish error handling.
To prevent the deadlock move the rescan-related code to after we drop the
state_mutex.
This also adds a check for if we are already in the running state. This
prevents extra scans and helps the iscsid case where if the transport class
has already onlined the device during its recovery process then we don't
need userspace to do it again plus possibly block that daemon.
Link: https://lore.kernel.org/r/20211105221048.6541-3-michael.christie@oracle.com
Fixes: f0f82e2476 ("scsi: core: Fix capacity set to zero after offlinining device")
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: lijinlin <lijinlin3@huawei.com>
Cc: Wu Bo <wubo40@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We can race where iscsi_session_recovery_timedout() has woken up the error
handler thread and it's now setting the devices to offline, and
session_recovery_timedout()'s call to scsi_target_unblock() is also trying
to set the device's state to transport-offline. We can then get a mix of
states.
For the case where we can't relogin we want the devices to be in
transport-offline so when we have repaired the connection
__iscsi_unblock_session() can set the state back to running.
Set the device state then call into libiscsi to wake up the error handler.
Link: https://lore.kernel.org/r/20211105221048.6541-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following has been observed on a test setup:
WARNING: CPU: 4 PID: 250 at drivers/scsi/ufs/ufshcd.c:2737 ufshcd_queuecommand+0x468/0x65c
Call trace:
ufshcd_queuecommand+0x468/0x65c
scsi_send_eh_cmnd+0x224/0x6a0
scsi_eh_test_devices+0x248/0x418
scsi_eh_ready_devs+0xc34/0xe58
scsi_error_handler+0x204/0x80c
kthread+0x150/0x1b4
ret_from_fork+0x10/0x30
That warning is triggered by the following statement:
WARN_ON(lrbp->cmd);
Fix this warning by clearing lrbp->cmd from the abort handler.
Link: https://lore.kernel.org/r/20211104181059.4129537-1-bvanassche@acm.org
Fixes: 7a3e97b0dc ("[SCSI] ufshcd: UFS Host controller driver")
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code but it also has two driver updates: ufs and qla2xxx.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYY5mOyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXpjAQDboVkH
7RQblJf8AKDMjN2baSIrmbk7qEUqzRgo6Ef3egEAi044Gx4KqBwzBLiCREcFW/Mt
F95pt5udsLypGhpfZlE=
=fiv8
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code but it also has two driver updates: ufs and qla2xxx"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
scsi: scsi_debug: Don't call kcalloc() if size arg is zero
scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
scsi: scsi_ioctl: Validate command size
scsi: ufs: ufshpb: Properly handle max-single-cmd
scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
scsi: bsg: Fix errno when scsi_bsg_register_queue() fails
scsi: sr: Remove duplicate assignment
scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host
scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9
scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS
scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks
scsi: ufs: ufs-exynos: Factor out priv data init
scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option
scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops
scsi: ufs: ufs-exynos: Add setup_clocks callback
scsi: ufs: ufs-exynos: Add refclkout_stop control
scsi: ufs: ufs-exynos: Simplify drv_data retrieval
scsi: ufs: ufs-exynos: Change pclk available max value
scsi: ufs: Add quirk to enable host controller without PH configuration
scsi: ufs: Add quirk to handle broken UIC command
...
-----BEGIN PGP SIGNATURE-----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=1GPi
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Set of fixes for the batched tag allocation (Ming, me)
- add_disk() error handling fix (Luis)
- Nested queue quiesce fixes (Ming)
- Shared tags init error handling fix (Ye)
- Misc cleanups (Jean, Ming, me)
* tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block:
nvme: wait until quiesce is done
scsi: make sure that request queue queiesce and unquiesce balanced
scsi: avoid to quiesce sdev->request_queue two times
blk-mq: add one API for waiting until quiesce is done
blk-mq: don't free tags if the tag_set is used by other device in queue initialztion
block: fix device_add_disk() kobject_create_and_add() error handling
block: ensure cached plug request matches the current queue
block: move queue enter logic into blk_mq_submit_bio()
block: make bio_queue_enter() fast-path available inline
block: split request allocation components into helpers
block: have plug stored requests hold references to the queue
blk-mq: update hctx->nr_active in blk_mq_end_request_batch()
blk-mq: add RQF_ELV debug entry
blk-mq: only try to run plug merge if request has same queue with incoming bio
block: move RQF_ELV setting into allocators
dm: don't stop request queue after the dm device is suspended
block: replace always false argument with 'false'
block: assign correct tag before doing prefetch of request
blk-mq: fix redundant check of !e expression
For fixing queue quiesce race between driver and block layer(elevator
switch, update nr_requests, ...), we need to support concurrent quiesce
and unquiesce, which requires the two call balanced.
It isn't easy to audit that in all scsi drivers, especially the two may
be called from different contexts, so do it in scsi core with one
per-device atomic variable to balance quiesce and unquiesce.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: e70feb8b3e ("blk-mq: support concurrent queue quiesce/unquiesce")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211109071144.181581-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For fixing queue quiesce race between driver and block layer(elevator
switch, update nr_requests, ...), we need to support concurrent quiesce
and unquiesce, which requires the two to be balanced.
blk_mq_quiesce_queue() calls blk_mq_quiesce_queue_nowait() for updating
quiesce depth and marking the flag, then scsi_internal_device_block() calls
blk_mq_quiesce_queue_nowait() two times actually.
Fix the double quiesce and keep quiesce and unquiesce balanced.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: e70feb8b3e ("blk-mq: support concurrent queue quiesce/unquiesce")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211109071144.181581-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This series consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes. Notable core changes are the removal of scsi->tag which caused
some churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYYUfBCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbUJAQDZt4oc
vUx9JpyrdHxxTCuOzVFd8W1oJn0k5ltCBuz4yAD8DNbGhGm93raMSJ3FOOlzLEbP
RG8vBdpxMudlvxAPi/A=
=BSFz
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
If the size arg to kcalloc() is zero, it returns ZERO_SIZE_PTR. Because of
that, for a following NULL pointer check to work on the returned pointer,
kcalloc() must not be called with the size arg equal to zero. Return early
without error before the kcalloc() call if size arg is zero.
BUG: KASAN: null-ptr-deref in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: null-ptr-deref in sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974
Write of size 4 at addr 0000000000000010 by task syz-executor.1/22789
CPU: 1 PID: 22789 Comm: syz-executor.1 Not tainted 5.15.0-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
__kasan_report mm/kasan/report.c:446 [inline]
kasan_report.cold.14+0x112/0x117 mm/kasan/report.c:459
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189
memcpy+0x3b/0x60 mm/kasan/shadow.c:66
memcpy include/linux/fortify-string.h:191 [inline]
sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974
do_dout_fetch drivers/scsi/scsi_debug.c:2954 [inline]
do_dout_fetch drivers/scsi/scsi_debug.c:2946 [inline]
resp_verify+0x49e/0x930 drivers/scsi/scsi_debug.c:4276
schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478
scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533
scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline]
scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699
blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639
__blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
__blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761
__blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838
blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62
blk_execute_rq+0xdb/0x360 block/blk-exec.c:102
sg_scsi_ioctl drivers/scsi/scsi_ioctl.c:621 [inline]
scsi_ioctl+0x8bb/0x15c0 drivers/scsi/scsi_ioctl.c:930
sg_ioctl_common+0x172d/0x2710 drivers/scsi/sg.c:1112
sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Link: https://lore.kernel.org/r/1636056397-13151-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller <syzkaller@googlegroups.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
No need to deduce command size in scsi_setup_scsi_cmnd() anymore as
appropriate checks have been added to scsi_fill_sghdr_rq() function and the
cmd_len should never be zero here. The code to do that wasn't correct
anyway, as it used uninitialized cmd->cmnd, which caused a null-ptr-deref
if the command size was zero as in the trace below. Fix this by removing
the unneeded code.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 1822 Comm: repro Not tainted 5.15.0 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
Call Trace:
blk_mq_dispatch_rq_list+0x7c7/0x12d0
__blk_mq_sched_dispatch_requests+0x244/0x380
blk_mq_sched_dispatch_requests+0xf0/0x160
__blk_mq_run_hw_queue+0xe8/0x160
__blk_mq_delay_run_hw_queue+0x252/0x5d0
blk_mq_run_hw_queue+0x1dd/0x3b0
blk_mq_sched_insert_request+0x1ff/0x3e0
blk_execute_rq_nowait+0x173/0x1e0
blk_execute_rq+0x15c/0x540
sg_io+0x97c/0x1370
scsi_ioctl+0xe16/0x28e0
sd_ioctl+0x134/0x170
blkdev_ioctl+0x362/0x6e0
block_ioctl+0xb0/0xf0
vfs_ioctl+0xa7/0xf0
do_syscall_64+0x3d/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
---[ end trace 8b086e334adef6d2 ]---
Kernel panic - not syncing: Fatal exception
Link: https://lore.kernel.org/r/20211103170659.22151-2-tadeusz.struk@linaro.org
Fixes: 2ceda20f0a ("scsi: core: Move command size detection out of the fast path")
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: <stable@vger.kernel.org> # 5.15, 5.14, 5.10
Reported-by: syzbot+5516b30f5401d4dcbcae@syzkaller.appspotmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Need to make sure the command size is valid before copying the command from
user space.
Link: https://lore.kernel.org/r/20211103170659.22151-1-tadeusz.struk@linaro.org
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: <stable@vger.kernel.org> # 5.15, 5.14, 5.10
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The spec recommends that for transfer length larger than the max-single-cmd
attribute (bMAX_DATA_SIZE_FOR_HPB_SINGLE_CMD) it is possible to couple
pre-requests with the HPB-READ command. Being a recommendation, using
pre-requests can be perceived merely as a means of optimization. A common
practice was to send pre-requests for chunks within some interval, and
leave the READ10 untouched if larger.
Now that the pre-request flows have been removed, all the commands are
single commands. Properly handle this attribute and do not send HPB-READ
for transfer lengths larger than max-single-cmd.
[mkp: resolve conflict]
Fixes: 09d9e4d041 ("scsi: ufs: ufshpb: Remove HPB2.0 flows")
Link: https://lore.kernel.org/r/20211031123654.17719-1-avri.altman@wdc.com
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The partial UFS revert in 5.15 is needed for some additional fixes in
the 5.16 SCSI tree. Merge the fixes branch.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The changes to issue the abort from the scmd->abort_work instead of the EH
thread introduced a problem if eh_deadline is used. If aborting the
command(s) is successful, and there are never any scmds added to the
shost->eh_cmd_q, there is no code path which will reset the ->last_reset
value back to zero.
The effect of this is that after a successful abort with no EH thread
activity, a subsequent timeout, perhaps a long time later, might
immediately be considered past a user-set eh_deadline time, and the host
will be reset with no attempt at recovery.
Fix this by resetting ->last_reset back to zero in scmd_eh_abort_handler()
if it is determined that the EH thread will not run to do this.
Thanks to Gopinath Marappan for investigating this problem.
Link: https://lore.kernel.org/r/20211029194311.17504-2-emilne@redhat.com
Fixes: e494f6a728 ("[SCSI] improved eh timeout handler")
Cc: stable@vger.kernel.org
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the value of error is printed, it will always be 0. We should print
the correct error code when scsi_bsg_register_queue() fails.
Link: https://lore.kernel.org/r/20211022010201.426746-1-liu.yun@linux.dev
Fixes: ead09dd3ae ("scsi: bsg: Simplify device registration")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hardening work by Jason
vdpa driver for Alibaba ENI
Performance tweaks for virtio blk
virtio rng rework using an internal buffer
mac/mtu programming for mlx5 vdpa
Misc fixes, cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmF/su8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpo+sIAJjBTvbET+d0KuIMt8YBGsU+NWgHaJxW06hm
GHZzinueZYWaS20MPMYMPfcHUgigWj0kk7F0gMljG5rtDFzR85JkOi7+e5V6RVJW
8SQc7JjA1Krde6EiPJdlv3mVkLz/5VbrGUgjAW9di/O04Xc/jAc9kmJ41wTYr0mL
E5IsUi9QBmgHtKQ+2ofb9QEWuebJclGK+NVd3Kp08BtAQOrdn5UrIzY30/sjkZwE
ul2ll6v/k7T3dCQbHD/wMgfFycPvoZVfxaVj+FWQnwdWkqZwzMRmpKPRes4KJfww
Lfx1qox10mJzH7XJCs7xmOM8f7HgNNWi0gD5FxNlfkiz1AwHYOk=
=DTXY
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"vhost and virtio fixes and features:
- Hardening work by Jason
- vdpa driver for Alibaba ENI
- Performance tweaks for virtio blk
- virtio rng rework using an internal buffer
- mac/mtu programming for mlx5 vdpa
- Misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (45 commits)
vdpa/mlx5: Forward only packets with allowed MAC address
vdpa/mlx5: Support configuration of MAC
vdpa/mlx5: Fix clearing of VIRTIO_NET_F_MAC feature bit
vdpa_sim_net: Enable user to set mac address and mtu
vdpa: Enable user to set mac and mtu of vdpa device
vdpa: Use kernel coding style for structure comments
vdpa: Introduce query of device config layout
vdpa: Introduce and use vdpa device get, set config helpers
virtio-scsi: don't let virtio core to validate used buffer length
virtio-blk: don't let virtio core to validate used length
virtio-net: don't let virtio core to validate used length
virtio_ring: validate used buffer length
virtio_blk: correct types for status handling
virtio_blk: allow 0 as num_request_queues
i2c: virtio: Add support for zero-length requests
virtio-blk: fixup coccinelle warnings
virtio_ring: fix typos in vring_desc_extra
virtio-pci: harden INTX interrupts
virtio_pci: harden MSI-X interrupts
virtio_config: introduce a new .enable_cbs method
...
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space
and avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace
to work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction,
by exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec
offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP
buffer pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x
and Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we
can add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements
to CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=srde
-----END PGP SIGNATURE-----
Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
The end goal of the current buffer overflow detection work[0] is to gain
full compile-time and run-time coverage of all detectable buffer overflows
seen via array indexing or memcpy(), memmove(), and memset(). The str*()
family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this series
contains the foundational elements of several related buffer overflow
detection improvements by providing new common helpers and FORTIFY_SOURCE
changes needed to gain the introspection required for compiler visibility
into array sizes. Also included are a handful of already Acked instances
using the helpers (or related clean-ups), with many more waiting at the
ready to be taken via subsystem-specific trees[2]. The new helpers are:
- struct_group() for gaining struct member range introspection.
- memset_after() and memset_startat() for clearing to the end of structures.
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in structs.
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage under
GCC, and to prepare to fix the currently broken Clang support. Finishing
this work is part of the larger series[0], but depends on all the false
positives and buffer overflow bug fixes to have landed already and those
that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a compile-time
and run-time tests are added for FORTIFY_SOURCE and the mem*()-family
functions respectively. The compile time tests have found a legitimate
(though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage that
result in no known object code differences.
After this series (and the changes that have now landed via netdev
and usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds. However, due corner cases in
GCC[3] and Clang[4], I have not included the last two patches that turn
on these options, as I don't want to introduce any known warnings to
the build. Hopefully these can be solved soon.
[0] https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE
[2] https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/
[3] https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/
[4] https://bugs.llvm.org/show_bug.cgi?id=51682
[5] https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/
[6] https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmGAFWcWHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJmKFD/45MJdnvW5MhIEeW5tc5UjfcIPS
ae+YvlEX/2ZwgSlTxocFVocE6hz7b6eCiX3dSAChPkPxsSfgeiuhjxsU+4ROnELR
04RqTA/rwT6JXfJcXbDPXfxDL4huUkgktAW3m1sT771AZspeap2GrSwFyttlTqKA
+kTiZ3lXJVFcw10uyhfp3Lk6eFJxdf5iOjuEou5kBOQfpNKEOduRL2K15hSowOwB
lARiAC+HbmN+E+npvDE7YqK4V7ZQ0/dtB0BlfqgTkn1spQz8N21kBAMpegV5vvIk
A+qGHc7q2oyk4M14TRTidQHGQ4juW1Kkvq3NV6KzwQIVD+mIfz0ESn3d4tnp28Hk
Y+OXTI1BRFlApQU9qGWv33gkNEozeyqMLDRLKhDYRSFPA9UKkpgXQRzeTzoLKyrQ
4B6n5NnUGcu7I6WWhpyZQcZLDsHGyy0vHzjQGs/NXtb1PzXJ5XIGuPdmx9pVMykk
IVKnqRcWyGWahfh3asOnoXvdhi1No4NSHQ/ZHfUM+SrIGYjBMaUisw66qm3Fe8ZU
lbO2CFkCsfGSoKNPHf0lUEGlkyxAiDolazOfflDNxdzzlZo2X1l/a7O/yoO4Pqul
cdL0eDjiNoQ2YR2TSYPnXq5KSL1RI0tlfS8pH8k1hVhZsQx0wpAQ+qki0S+fLePV
PdA9XB82G2tmqKc9cQ==
=9xbT
-----END PGP SIGNATURE-----
Merge tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"The end goal of the current buffer overflow detection work[0] is to
gain full compile-time and run-time coverage of all detectable buffer
overflows seen via array indexing or memcpy(), memmove(), and
memset(). The str*() family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this
series contains the foundational elements of several related buffer
overflow detection improvements by providing new common helpers and
FORTIFY_SOURCE changes needed to gain the introspection required for
compiler visibility into array sizes. Also included are a handful of
already Acked instances using the helpers (or related clean-ups), with
many more waiting at the ready to be taken via subsystem-specific
trees[2].
The new helpers are:
- struct_group() for gaining struct member range introspection
- memset_after() and memset_startat() for clearing to the end of
structures
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in
structs
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage
under GCC, and to prepare to fix the currently broken Clang support.
Finishing this work is part of the larger series[0], but depends on
all the false positives and buffer overflow bug fixes to have landed
already and those that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a
compile-time and run-time tests are added for FORTIFY_SOURCE and the
mem*()-family functions respectively. The compile time tests have
found a legitimate (though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage
that result in no known object code differences.
After this series (and the changes that have now landed via netdev and
usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds.
However, due corner cases in GCC[3] and Clang[4], I have not included
the last two patches that turn on these options, as I don't want to
introduce any known warnings to the build. Hopefully these can be
solved soon"
Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1]
Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2]
Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3]
Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4]
Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5]
Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6]
* tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
fortify: strlen: Avoid shadowing previous locals
compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer
treewide: Replace 0-element memcpy() destinations with flexible arrays
treewide: Replace open-coded flex arrays in unions
stddef: Introduce DECLARE_FLEX_ARRAY() helper
btrfs: Use memset_startat() to clear end of struct
string.h: Introduce memset_startat() for wiping trailing members and padding
xfrm: Use memset_after() to clear padding
string.h: Introduce memset_after() for wiping trailing members/padding
lib: Introduce CONFIG_MEMCPY_KUNIT_TEST
fortify: Add compile-time FORTIFY_SOURCE tests
fortify: Allow strlen() and strnlen() to pass compile-time known lengths
fortify: Prepare to improve strnlen() and strlen() warnings
fortify: Fix dropped strcpy() compile-time write overflow check
fortify: Explicitly disable Clang support
fortify: Move remaining fortify helpers into fortify-string.h
lib/string: Move helper functions out of string.c
compiler_types.h: Remove __compiletime_object_size()
cm4000_cs: Use struct_group() to zero struct cm4000_dev region
can: flexcan: Use struct_group() to zero struct flexcan_regs regions
...
-----BEGIN PGP SIGNATURE-----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=dLYJ
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/passthrough-flag-2021-10-29' of git://git.kernel.dk/linux-block
Pull QUEUE_FLAG_SCSI_PASSTHROUGH removal from Jens Axboe:
"This contains a series leading to the removal of the
QUEUE_FLAG_SCSI_PASSTHROUGH queue flag"
* tag 'for-5.16/passthrough-flag-2021-10-29' of git://git.kernel.dk/linux-block:
block: remove blk_{get,put}_request
block: remove QUEUE_FLAG_SCSI_PASSTHROUGH
block: remove the initialize_rq_fn blk_mq_ops method
scsi: add a scsi_alloc_request helper
bsg-lib: initialize the bsg_job in bsg_transport_sg_io_fn
nfsd/blocklayout: use ->get_unique_id instead of sending SCSI commands
sd: implement ->get_unique_id
block: add a ->get_unique_id method
-----BEGIN PGP SIGNATURE-----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=w6Kz
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/scsi-ma-2021-10-29' of git://git.kernel.dk/linux-block
Pull SCSI multi-actuator support from Jens Axboe:
"This adds SCSI support for the recently merged block multi-actuator
support. Since this was sitting on top of the block tree, the SCSI
side asked me to queue it up."
* tag 'for-5.16/scsi-ma-2021-10-29' of git://git.kernel.dk/linux-block:
doc: Fix typo in request queue sysfs documentation
doc: document sysfs queue/independent_access_ranges attributes
libata: support concurrent positioning ranges log
scsi: sd: add concurrent positioning ranges support
-----BEGIN PGP SIGNATURE-----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=HiWU
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- paride driver cleanups (Christoph)
- Remove cryptoloop support (Christoph)
- null_blk poll support (me)
- Now that add_disk() supports proper error handling, add it to various
drivers (Luis)
- Make ataflop actually work again (Michael)
- s390 dasd fixes (Stefan, Heiko)
- nbd fixes (Yu, Ye)
- Remove redundant wq flush in mtip32xx (Christophe)
- NVMe updates
- fix a multipath partition scanning deadlock (Hannes Reinecke)
- generate uevent once a multipath namespace is operational again
(Hannes Reinecke)
- support unique discovery controller NQNs (Hannes Reinecke)
- fix use-after-free when a port is removed (Israel Rukshin)
- clear shadow doorbell memory on resets (Keith Busch)
- use struct_size (Len Baker)
- add error handling support for add_disk (Luis Chamberlain)
- limit the maximal queue size for RDMA controllers (Max Gurtovoy)
- use a few more symbolic names (Max Gurtovoy)
- fix error code in nvme_rdma_setup_ctrl (Max Gurtovoy)
- add support for ->map_queues on FC (Saurav Kashyap)
- support the current discovery subsystem entry (Hannes Reinecke)
- use flex_array_size and struct_size (Len Baker)
- bcache fixes (Christoph, Coly, Chao, Lin, Qing)
- MD updates (Christoph, Guoqing, Xiao)
- Misc fixes (Dan, Ding, Jiapeng, Shin'ichiro, Ye)
* tag 'for-5.16/drivers-2021-10-29' of git://git.kernel.dk/linux-block: (117 commits)
null_blk: Fix handling of submit_queues and poll_queues attributes
block: ataflop: Fix warning comparing pointer to 0
bcache: replace snprintf in show functions with sysfs_emit
bcache: move uapi header bcache.h to bcache code directory
nvmet: use flex_array_size and struct_size
nvmet: register discovery subsystem as 'current'
nvmet: switch check for subsystem type
nvme: add new discovery log page entry definitions
block: ataflop: more blk-mq refactoring fixes
block: remove support for cryptoloop and the xor transfer
mtd: add add_disk() error handling
rnbd: add error handling support for add_disk()
um/drivers/ubd_kern: add error handling support for add_disk()
m68k/emu/nfblock: add error handling support for add_disk()
xen-blkfront: add error handling support for add_disk()
bcache: add error handling support for add_disk()
dm: add add_disk() error handling
block: aoe: fixup coccinelle warnings
nvmet: use struct_size over open coded arithmetic
nvme: drop scan_lock and always kick requeue list when removing namespaces
...
-----BEGIN PGP SIGNATURE-----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=QWC+
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- mq-deadline accounting improvements (Bart)
- blk-wbt timer fix (Andrea)
- Untangle the block layer includes (Christoph)
- Rework the poll support to be bio based, which will enable adding
support for polling for bio based drivers (Christoph)
- Block layer core support for multi-actuator drives (Damien)
- blk-crypto improvements (Eric)
- Batched tag allocation support (me)
- Request completion batching support (me)
- Plugging improvements (me)
- Shared tag set improvements (John)
- Concurrent queue quiesce support (Ming)
- Cache bdev in ->private_data for block devices (Pavel)
- bdev dio improvements (Pavel)
- Block device invalidation and block size improvements (Xie)
- Various cleanups, fixes, and improvements (Christoph, Jackie,
Masahira, Tejun, Yu, Pavel, Zheng, me)
* tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits)
blk-mq-debugfs: Show active requests per queue for shared tags
block: improve readability of blk_mq_end_request_batch()
virtio-blk: Use blk_validate_block_size() to validate block size
loop: Use blk_validate_block_size() to validate block size
nbd: Use blk_validate_block_size() to validate block size
block: Add a helper to validate the block size
block: re-flow blk_mq_rq_ctx_init()
block: prefetch request to be initialized
block: pass in blk_mq_tags to blk_mq_rq_ctx_init()
block: add rq_flags to struct blk_mq_alloc_data
block: add async version of bio_set_polled
block: kill DIO_MULTI_BIO
block: kill unused polling bits in __blkdev_direct_IO()
block: avoid extra iter advance with async iocb
block: Add independent access ranges support
blk-mq: don't issue request directly in case that current is to be blocked
sbitmap: silence data race warning
blk-cgroup: synchronize blkg creation against policy deactivation
block: refactor bio_iov_bvec_set()
block: add single bio async direct IO helper
...
We never tries to use used length, so the patch prevents the virtio
core from validating used length.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211027022107.14357-5-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Host Performance Buffer feature allows UFS read commands to carry the
physical media addresses along with the LBAs, thus allowing less internal
L2P-table switches in the device. HPB1.0 allowed a single LBA, while
HPB2.0 increases this capacity up to 255 blocks.
Carrying more than a single record, the read operation is no longer purely
of type "read" but a "hybrid" command: Writing the physical address to the
device in one operation and reading back the required payload in another.
The JEDEC HPB spec defines two commands for this operation:
HPB-WRITE-BUFFER (0x2) to write the physical addresses to device, and
HPB-READ to read the payload.
With the current HPB design the UFS driver has no alternative but to divide
the READ request into 2 separate commands: HPB-WRITE-BUFFER and HPB-READ.
This causes a great deal of aggravation to the block layer guys who
demanded that we completely revert the entire HPB driver regardless of the
huge amount of corporate effort already invested in it.
As a compromise, remove only the pieces that implement the 2.0
specification. This is done as a matter of urgency for the final 5.15
release.
Link: https://lore.kernel.org/r/20211030062301.248-1-avri.altman@wdc.com
Tested-by: Avri Altman <avri.altman@wdc.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Co-developed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Testing revealed a problem with how the reference tag was handled for
a WRITE_INSERT operation. The SCSI_PROT_REF_CHECK flag is not set when
the controller is asked to generate the protection information
(i.e. not DIX). And as a result the initial reference tag would not be
set in the WRITE_INSERT case.
Separate handling of the REF_CHECK and REF_INCREMENT flags to align
with both the DIX spec and the MPI implementation.
Link: https://lore.kernel.org/r/20211028034202.24225-1-martin.petersen@oracle.com
Fixes: b3e2c72af1 ("scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
These are now pointless wrappers around blk_mq_{alloc,free}_request,
so remove them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211025070517.1548584-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce virtual host driver for ExynosAuto v9 UFS mHCI.
The VH (Virtual Host) only supports data transfer functions so most of
physical features must be disabled by setting the following quirks:
- UFSHCD_QUIRK_BROKEN_UIC_CMD
- UFSHCD_QUIRK_SKIP_PH_CONFIGURATION
Before initialization, the VH must wait until PH is ready. This wait is
currently implemented via polling.
Link: https://lore.kernel.org/r/20211018124216.153072-15-chanho61.park@samsung.com
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UFS controller of the ExynosAuto v9 SoC supports a multi-host interface
for I/O virtualization. In general, we're using para-virtualized driver to
support a block device by several virtual machines.
Multi-host functionality extends the host controller by providing register
interfaces that can be used by each VM's UFS drivers respectively. This way
we can provide direct access to the UFS device for multiple VMs similar to
PCIe SR-IOV.
We divide this M-HCI as PH (Physical Host) and VHs (Virtual Host). The PH
supports all UFSHCI functions (all SAPs) like a conventional UFSHCI but the
VH only supports data transfer functions. Thus, except UTP_CMD_SAP and
UTP_TMPSAP, the PH should handle all the physical features.
Provide an initial implementation of PH part. M-HCI can support up to four
interfaces (1 for a PH and 3 for VHs) but this patch initially supports
only 1 PH and 1 VH. For this, we uses TASK_TAG[7:5] field so TASK_TAG[4:0]
for 32 doorbell will be supported. After the PH is initiated, this will
send a ready message to VHs through a mailbox register. The message handler
is not fully implemented yet such as supporting reset / abort cases.
Link: https://lore.kernel.org/r/20211018124216.153072-14-chanho61.park@samsung.com
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for the ExynosAuto v9 SoC. This requires controlling the UFS IP
shareability register via syscon and regmap. The offset of the register
can be different according to the UFS instance and SoC specific offset
value. As a result, we need to get the offset value from DT property.
Unlike exynos7, this implementation has a different M-PHY setting which
must be configured via exynosauto_ufs_pre_link.
Link: https://lore.kernel.org/r/20211018124216.153072-12-chanho61.park@samsung.com
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add driver-specific pre/post_hce_enable callbacks to execute extra
initializations before and after hce_enable_notify callback.
Link: https://lore.kernel.org/r/20211018124216.153072-11-chanho61.park@samsung.com
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Linus Torvalds
Adrian Hunter
Michael S. Tsirkin
James Smart
Shin'ichiro Kawasaki
Mike Christie
George Kennedy
Sreekanth Reddy
Ye Guojin
Dan Carpenter
Bean Huo
Ewan D. Milne
Bart Van Assche
Ming Lei
Tadeusz Struk
Avri Altman
Martin K. Petersen
Jackie Liu
Jason Wang
Christoph Hellwig
Jakub Kicinski
Alexey Dobriyan
Chanho Park