Граф коммитов

36 Коммитов

Автор SHA1 Сообщение Дата
Mike Ditto 71773f0337 powerpc: Add del_node() for early boot code to prune inapplicable devices.
Some platforms have variants that can share most of a flat device tree but need
a few devices selectively pruned at boot time.  This adds del_node() to ops.h
to allow access to the existing fdt_del_node().

Signed-off-by: Mike Ditto <mditto@consentry.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-22 15:01:21 +11:00
Laurent Pinchart da0a5f0c65 [POWERPC] Add bootwrapper function to get virtual reg from the device tree.
This patch adds a new generic device tree processing function that retrieves
virtual reg addresses from the device tree to the bootwrapper code. It also
updates the bootwrapper code to use the new function.

dt_get_virtual_reg() retrieves the virtual reg addresses from the
"virtual-reg" property. If the property can't be found, it uses the "reg"
property and walks the tree to translate it to absolute addresses.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:37 -05:00
Kumar Gala b3bea15d29 [POWERPC] bootwrapper: Add find_node_by_compatible
Add the ability to find a device node by just what its compatible with.
This is useful in cases that we don't have a prop to find the node with.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27 14:07:37 -06:00
Kumar Gala ad160681c8 [POWERPC] bootwrapper: Add find_node_by_alias and dt_fixup_mac_address_by_alias
Add the ability to set the mac address given the alias for the device.
Removes the need for having a linux,network-index property.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:32:44 -06:00
David Gibson 430b01e8f5 [POWERPC] Kill flatdevtree.c
Now that earlier patches have switched the bootwrapper to using libfdt
for device tree manipulation, this patch removes the now unused
flatdevtree.c and related files.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:46:15 +11:00
David Gibson 2f0dfeaa84 [POWERPC] Use embedded libfdt in the bootwrapper
This incorporates libfdt (from the source embedded in an earlier
commit) into the wrapper.a library used by the bootwrapper.  This
includes adding a libfdt_env.h file, which the libfdt sources need in
order to integrate into the bootwrapper environment, and a
libfdt-wrapper.c which provides glue to connect the bootwrapper's
abstract device tree callbacks to the libfdt functions.

In addition, this changes the various wrapper and platform files to
use libfdt functions instead of the older flatdevtree.c library.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:46:14 +11:00
Grant Likely 7ddc5f978b [POWERPC] Virtex: Add uartlite bootwrapper driver
Allows the bootwrapper to use the uartlite device for console output.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:13 -05:00
Scott Wood 27ff35d902 [POWERPC] bootwrapper: Factor out dt_set_mac_address()
This allows callers to set addresses one at a time when that would be more
convenient.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 11:48:43 +10:00
Grant Likely 85498ae87c [POWERPC] mpc5200: Add cuimage support for mpc5200 boards
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22 14:49:22 +10:00
Scott Wood 21f3fe2f7a [POWERPC] bootwrapper: Add get_path()
This will be used by the PlanetCore firmware support to construct
a linux,stdout-path from the serial node that it finds.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:23 +10:00
Scott Wood e5d8d54db2 [POWERPC] bootwrapper: Add PowerQUICC II (82xx with CPM) cuboot support
This allows booting on legacy, non-device-tree aware versions of U-boot.

It also fixes up the hardware to match the PCI and chipselect information
in the device tree, as u-boot is inconsistent in setting these up
correctly (or at all).

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:37:09 +10:00
Scott Wood 2f1d489932 [POWERPC] bootwrapper: Move linker symbols into ops.h
Most of these were previously used by numerous C files and
redeclared in each one.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:27:28 +10:00
Scott Wood d0f53fafc0 [POWERPC] bootwrapper: Add CPM serial driver
This serial port is used on all 8xx, many 82xx, and some 85xx chips.

The driver requires that the port has already been set up by the firmware
and/or platform code.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:26:20 +10:00
Scott Wood 3ee9b7abaf [POWERPC] bootwrapper: Declare udelay() in ops.h
Declarations in various users are removed.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:49 +10:00
Scott Wood a73ac50c47 [POWERPC] bootwrapper: Add dt_is_compatible()
This can be used rather than doing a simple strcmp, which will fail to
handle multiple compatible entries.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:48 +10:00
Scott Wood 643d3c139b [POWERPC] bootwrapper: Set timebase_period_ns from dt_fixup_cpu_clocks
This lets udelay() work properly on platforms which use dt_fixup_cpu_clocks.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:47 +10:00
Geoff Levand 62cf6a9d65 [POWERPC] Make kernel_entry_t have global scope in bootwrapper
For the convenience of custom platform code make the powerpc
bootwrapper typdef kernel_entry_t global in scope.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:16:50 +10:00
Geoff Levand b96fbb6e1e [POWERPC] Fix constantness of bootwrapper arg
Fixes the constantness of the powerpc bootwrapper's console_ops.write
routine.  Allows printing of constant strings.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:16:49 +10:00
Mark A. Greer e12deb840c [POWERPC] Add bootwrapper support for Marvell MPSC
The bootwrapper requires a serial driver to allow cmdline editing
and information reporting on the console.  This driver is required
by platforms that boot a zImage and use the MPSC for the console.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12 11:32:49 +10:00
Mark A. Greer 8895ea483e [POWERPC] Add dt_xlate_addr() to bootwrapper
dt_xlate_reg() looks up the 'reg' property in the specified node
to get the address and size to translate.  Add dt_xlate_addr()
which is passed in the address and size to translate.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30 11:02:05 +10:00
Geert Uytterhoeven 4ca478e606 [POWERPC] bootwrapper: Use `unsigned long' for malloc sizes
Use `unsigned long' for malloc sizes, to match common practice and types used
by most callers and callees.
Also use `unsigned long' for integers representing pointers in simple_alloc.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@eu.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:06:54 +10:00
Mark A. Greer d6f1d2a9a8 [POWERPC] Routine to find the devtree node of a linux,phandle
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:16 +10:00
Scott Wood 6e1af384f1 [POWERPC] bootwrapper: Add dt_xlate_reg(), and use it to find serial registers.
dt_xlate_reg() uses the ranges properties of a node's parentage to find
the absolute physical address of the node's registers.

The ns16550 driver uses this when no virtual-reg property is found.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:15 +10:00
David Gibson 3af82a8b00 [POWERPC] Clean up zImage handling of the command line
This cleans up how the zImage code manipulates the kernel
command line.  Notable improvements from the old handling:
	- Command line manipulation is consolidated into a new
prep_cmdline() function, rather than being scattered across start()
and some helper functions
	- Less stack space use: we use just a single global command
line buffer, which can be initialized by an external tool as before,
we no longer need another command line sized buffer on the stack.
	- Easier to support platforms whose firmware passes a
commandline, but not a device tree.  Platform code can now point new
loader_info fields to the firmware's command line, rather than having
to do early manipulation of the /chosen bootargs property which may
then be rewritten again by the core.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:14 +10:00
David Gibson 27fbaa9702 [POWERPC] Add device tree utility functions to zImage
This patch adds a library of useful device tree manipulation functions
to the zImage library, for use by platform code.  These functions are
based on the hooks already in dt_ops, so they're not dependent on a
particular device tree implementation.  This patch also slightly
streamlines the code in main.c using these new functions.

This is a consolidation of my work in this area with Scott Wood's
patches to a very similar end.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:14 +10:00
David Gibson e5a2072bd4 [POWERPC] New reg.h for the zImage
This patch adds a reg.h to the zImage code, with common definitions
for accessing system registers.  For now, this includes functions for
retrieving the PVR and the stack pointer.  This patch then uses the
new reg.h to let start() display the running stack address without
having to explicitly pass the stack as a parameter from the asm code.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-26 15:11:20 +10:00
Milton Miller 6a923216aa [POWERPC] bootwrapper: Add a fatal error helper
Add a macro fatal that calls printf then exit.  User must include stdio.h.

Typically replaces 3 lines with 1, although I added back some whitespace.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-26 15:11:20 +10:00
Milton Miller 0e6806734f [POWERPC] boot: export flush_cache
Move the declaration of flush_cache to ops.h for use by platform code.

Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-21 22:35:42 +11:00
Scott Wood f61e7cd21b [POWERPC] bootwrapper: Make setprop accept a const buffer.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-21 22:35:21 +11:00
Scott Wood a07940ba00 [POWERPC] bootwrapper: Add dt_ops methods.
Add get_parent, create_node, and find_node_by_prop_value to dt_ops.
Currently only implemented by flatdevtree_misc.

Also, add a _str convenience wrapper for setprop.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-21 22:35:21 +11:00
Scott Wood ce3edb30ec [POWERPC] bootwrapper: Add stddef.h to ops.h
ops.h references NULL, so include stddef.h, so files including ops.h
don't have to.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-13 21:15:42 +11:00
David Gibson cd197ffcf1 [POWERPC] zImage: Cleanup and improve zImage entry point
This patch re-organises the way the zImage wrapper code is entered, to
allow more flexibility on platforms with unusual entry conditions.
After this patch, a platform .o file has two options:

1) It can define a _zimage_start, in which case the platform code gets
   control from the very beginning of execution.  In this case the
   platform code is responsible for relocating the zImage if necessary,
   clearing the BSS, performing any platform specific initialization, and
   finally calling start() to load and enter the kernel.

2) It can define platform_init().  In this case the generic crt0.S
   handles initial entry, and calls platform_init() before calling
   start().  The signature of platform_init() is changed, however, to
   take up to 5 parameters (in r3..r7) as they come from the platform's
   initial loader, instead of a fixed set of parameters based on OF's
   usage.

   When using the generic crt0.S, the platform .o can optionally
   supply a custom stack to use, using the BSS_STACK() macro.  If this
   is not supplied, the crt0.S will assume that the loader has
   supplied a usable stack.

In either case, the platform code communicates information to the
generic code (specifically, a PROM pointer for OF systems, and/or an
initrd image address supplied by the bootloader) via a global
structure "loader_info".

In addition the wrapper script is rearranged to ensure that the
platform .o is always linked first.  This means that platforms where
the zImage entry point is at a fixed address or offset, rather than
being encoded in the binary header can be supported using option (1).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-13 13:35:03 +11:00
David Gibson 79c8541924 [POWERPC] zImage: Cleanup and improve prep_kernel()
This patch rewrites prep_kernel() in the zImage wrapper code to be
clearer and more flexible.  Notable changes:

	- Handling of the initrd image from prep_kernel() has moved
into a new prep_initrd() function.
	- The address of the initrd image is now added as device tree
properties, as the kernel expects.
	- We only copy a packaged initrd image to a new location if it
is in danger of being clobbered when the kernel moves to its final
location, instead of always.
	- By default we decompress the kernel directly to address 0,
instead of requiring it to relocate itself.  Platforms (such as OF)
where doing this could clobber still-live firmware data structures can
override the vmlinux_alloc hook to provide an alternate place to
decompress the kernel.
	- We no longer pass lots of information between functions in
global variables.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-13 13:35:01 +11:00
David Gibson 35af89eb49 [POWERPC] Cleanup zImage handling of kernel entry with flat device tree
This makes 2 changes to clean up the flat device tree handling
logic in the zImage wrapper.

First, there were two callbacks from the dt_ops structure used for
producing a final flat tree to pass to the kerne: dt_ops.ft_pack()
which packed the flat tree (possibly a no-op) and dt_ops.ft_addr()
which retreived the address of the final blob.  Since they were only
ever called together, this patch combines the two into a single new
callback, dt_ops.finalize().  This new callback does whatever
platform-dependent things are necessary to produce a final flat device
tree blob, and returns the blob's addres.

Second, the current logic calls the kernel with a flat device tree if
one is build into the zImage wrapper, otherwise it boots the kernel
with a PROM pointer, expecting the kernel to copy the OF device tree
itself.  This approach precludes the possibility of the platform
wrapper code building a flat device tree from whatever
platform-specific information firmware provides.  Thus, this patch
takes the more sensible approach of invoking the kernel with a flat
tree if the dt_ops.finalize callback provides one (by whatever means).

So, the dt_ops.finalize callback can be NULL, or can be a function
which returns NULL.  In either case, the zImage wrapper logic assumes
that this is a platform with OF and invokes the kernel accordingly.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:39:34 +11:00
Mark A. Greer c888554bf9 [POWERPC] More bootwrapper reorganization
More reorganization of the bootwrapper:
- Add dtb section to zImage
- ft_init now called by platform_init
- Pack a flat dt before calling kernel
- Remove size parameter from free
- printf only calls console_ops.write it its not NULL
- Some cleanup

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-18 15:50:18 +10:00
Mark A. Greer b2c5f61920 [POWERPC] Start arch/powerpc/boot code reorganization
This abstracts the operations used in the bootwrapper, and defines
the operations needed for the bootwrapper to run on an OF platform.

The operations have been divided up into platform ops (platform_ops),
firmware ops (fw_ops), device tree ops (dt_ops), and console ops
(console_ops).

The proper operations will be hooked up at runtime to provide the
functionality that you need.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-20 15:09:58 +10:00