[ Upstream commit 4bf3855497b60765ca03b983d064b25e99b97657 ]
Currently, the UIC_COMMAND_COMPL interrupt is disabled and a wmb() is used
to complete the register write before any following writes.
wmb() ensures the writes complete in that order, but completion doesn't
mean that it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read back
to force it to make it all the way to the device. This is documented in
device-io.rst and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the wmb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: d75f7fe495 ("scsi: ufs: reduce the interrupts for power mode change requests")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-9-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4a628877119bd40164a651d20321247b6f94a8b ]
Currently, interrupts are cleared and disabled prior to registering the
interrupt. An mb() is used to complete the clear/disable writes before the
interrupt is registered.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring these
bits have taken effect on the device is to perform a read back to force it
to make it all the way to the device. This is documented in device-io.rst
and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure these bits hit the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: 199ef13cac ("scsi: ufs: avoid spurious UFS host controller interrupts")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-8-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b715c55daf598aac8fa339048e4ca8a0916b332e ]
Currently, HCLKDIV is written to and then completed with an mb().
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: d90996dae8 ("scsi: ufs: Add UFS platform driver for Cadence UFS")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-6-181252004586@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9488511b3ac7eb48a91bc5eded7027525525e03 ]
Currently, the CGC enable bit is written and then an mb() is used to ensure
that completes before continuing.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Fixes: 81c0fc51b7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-5-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 823150ecf04f958213cf3bf162187cd1a91c885c ]
Currently, the QUNIPRO_SEL bit is written to and then an mb() is used to
ensure that completes before continuing.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, there's really no reason to even ensure completion before
continuing. The only requirement here is that this write is ordered to this
endpoint (which readl()/writel() guarantees already). For that reason the
mb() can be dropped altogether without anything forcing completion.
Fixes: f06fcc7155 ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-4-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c02aa24bf ]
On SM8550, depending on the Qunipro, we can run with G5 or G4. For now,
when the major version is 5 or above, we go with G5. Therefore, we need to
specifically tell UFS HC that.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 823150ecf04f ("scsi: ufs: qcom: Perform read back after writing unipro mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7959587f32 ]
On newer UFS revisions, the register at offset 0xD0 is called,
REG_UFS_PARAM0. Since the existing register, RETRY_TIMER_REG is not used
anywhere, it is safe to use the new name.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 823150ecf04f ("scsi: ufs: qcom: Perform read back after writing unipro mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a862fafa263aea0f427d51aca6ff7fd9eeaaa8bd ]
Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure
that write has gone through to the device.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: f06fcc7155 ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-2-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4d28e06b0c94636f6e35d003fa9ebac0a94e1ae ]
Currently, the reset bit for the UFS provided reset controller (used by its
phy) is written to, and then a mb() happens to try and ensure that hit the
device. Immediately afterwards a usleep_range() occurs.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. By doing so and
guaranteeing the ordering against the immediately following usleep_range(),
the mb() can safely be removed.
Fixes: 81c0fc51b7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-1-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee36710912b2075c417100a8acc642c9c6496501 ]
Calling ufshcd_hba_exit() from a function that is called asynchronously
from ufshcd_init() is wrong because this triggers multiple race
conditions. Instead of calling ufshcd_hba_exit(), log an error message.
Reported-by: Daniel Mentz <danielmentz@google.com>
Fixes: 1d337ec2f3 ("ufs: improve init sequence")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231218225229.2542156-3-bvanassche@acm.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a75a16c62a2540f11eeae4f2b50e95deefb652ea ]
utf16s_to_utf8s does not NULL terminate the output string. For us to be
able to add a NULL character when utf16s_to_utf8s returns, we need to make
sure that there is space for such NULL character at the end of the output
buffer. We can achieve this by passing an output buffer size to
utf16s_to_utf8s that is one character less than what we allocated.
Other call sites of utf16s_to_utf8s appear to be using the same technique
where they artificially reduce the buffer size by one to leave space for a
NULL character or line feed character.
Fixes: 4b828fe156 ("scsi: ufs: revamp string descriptor reading")
Reviewed-by: Mars Cheng <marscheng@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Yen-lin Lai <yenlinlai@google.com>
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://lore.kernel.org/r/20231017182026.2141163-1-danielmentz@google.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d3f59cf86 ]
__ufshcd_send_uic_cmd() is wrapped by uic_cmd_mutex and its related
contexts are accessed within the section wrapped by uic_cmd_mutex. Thus,
wrapping with host_lock is redundant.
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Link: https://lore.kernel.org/r/782ba5f26f0a96e58d85dff50751787d2d2a6b2b.1693790060.git.kwmad.kim@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chanwoo Lee <cw9316.lee@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a07d3c7a1 ]
Add PCI ID to support Intel Lunar Lake, same as MTL.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230328105832.3495-1-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a7edd041f ]
Even when urgent BKOPS fails, the consumer will get stuck in runtime
suspend status. Like commit 1a5665fc8d ("scsi: ufs: core: WLUN suspend
SSU/enter hibern8 fail recovery"), trigger the error handler and return
-EBUSY to break the suspend.
Fixes: b294ff3e34 ("scsi: ufs: core: Enable power management for wlun")
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Link: https://lore.kernel.org/r/20230425031721epcms2p5d4de65616478c967d466626e20c42a3a@epcms2p5
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ebe16155d ]
The ufshcd driver uses simpleondemand governor for devfreq. Add it to the
list of ufshcd softdeps to allow userspace initramfs tools like dracut to
automatically pull the governor module into the initramfs together with UFS
drivers.
Link: https://lore.kernel.org/r/20230220140740.14379-1-athierry@redhat.com
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba81043753 ]
There is a lock inversion and rwsem read-lock recursion in the devfreq
target callback which can lead to deadlocks.
Specifically, ufshcd_devfreq_scale() already holds a clk_scaling_lock
read lock when toggling the write booster, which involves taking the
dev_cmd mutex before taking another clk_scaling_lock read lock.
This can lead to a deadlock if another thread:
1) tries to acquire the dev_cmd and clk_scaling locks in the correct
order, or
2) takes a clk_scaling write lock before the attempt to take the
clk_scaling read lock a second time.
Fix this by dropping the clk_scaling_lock before toggling the write booster
as was done before commit 0e9d4ca43b ("scsi: ufs: Protect some contexts
from unexpected clock scaling").
While the devfreq callbacks are already serialised, add a second
serialising mutex to handle the unlikely case where a callback triggered
through the devfreq sysfs interface is racing with a request to disable
clock scaling through the UFS controller 'clkscale_enable' sysfs
attribute. This could otherwise lead to the write booster being left
disabled after having disabled clock scaling.
Also take the new mutex in ufshcd_clk_scaling_allow() to make sure that any
pending write booster update has completed on return.
Note that this currently only affects Qualcomm platforms since commit
87bd05016a ("scsi: ufs: core: Allow host driver to disable wb toggling
during clock scaling").
The lock inversion (i.e. 1 above) was reported by lockdep as:
======================================================
WARNING: possible circular locking dependency detected
6.1.0-next-20221216 #211 Not tainted
------------------------------------------------------
kworker/u16:2/71 is trying to acquire lock:
ffff076280ba98a0 (&hba->dev_cmd.lock){+.+.}-{3:3}, at: ufshcd_query_flag+0x50/0x1c0
but task is already holding lock:
ffff076280ba9cf0 (&hba->clk_scaling_lock){++++}-{3:3}, at: ufshcd_devfreq_scale+0x2b8/0x380
which lock already depends on the new lock.
[ +0.011606]
the existing dependency chain (in reverse order) is:
-> #1 (&hba->clk_scaling_lock){++++}-{3:3}:
lock_acquire+0x68/0x90
down_read+0x58/0x80
ufshcd_exec_dev_cmd+0x70/0x2c0
ufshcd_verify_dev_init+0x68/0x170
ufshcd_probe_hba+0x398/0x1180
ufshcd_async_scan+0x30/0x320
async_run_entry_fn+0x34/0x150
process_one_work+0x288/0x6c0
worker_thread+0x74/0x450
kthread+0x118/0x120
ret_from_fork+0x10/0x20
-> #0 (&hba->dev_cmd.lock){+.+.}-{3:3}:
__lock_acquire+0x12a0/0x2240
lock_acquire.part.0+0xcc/0x220
lock_acquire+0x68/0x90
__mutex_lock+0x98/0x430
mutex_lock_nested+0x2c/0x40
ufshcd_query_flag+0x50/0x1c0
ufshcd_query_flag_retry+0x64/0x100
ufshcd_wb_toggle+0x5c/0x120
ufshcd_devfreq_scale+0x2c4/0x380
ufshcd_devfreq_target+0xf4/0x230
devfreq_set_target+0x84/0x2f0
devfreq_update_target+0xc4/0xf0
devfreq_monitor+0x38/0x1f0
process_one_work+0x288/0x6c0
worker_thread+0x74/0x450
kthread+0x118/0x120
ret_from_fork+0x10/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&hba->clk_scaling_lock);
lock(&hba->dev_cmd.lock);
lock(&hba->clk_scaling_lock);
lock(&hba->dev_cmd.lock);
*** DEADLOCK ***
Fixes: 0e9d4ca43b ("scsi: ufs: Protect some contexts from unexpected clock scaling")
Cc: stable@vger.kernel.org # 5.12
Cc: Can Guo <quic_cang@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230116161201.16923-1-johan+linaro@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a5665fc8d ]
When SSU/enter hibern8 fail in WLUN suspend flow, trigger the error handler
and return busy to break the suspend. Otherwise the consumer will get
stuck in runtime suspend status.
Fixes: b294ff3e34 ("scsi: ufs: core: Enable power management for wlun")
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20221208072520.26210-1-peter.wang@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5675c381ea ]
Instead of locking and unlocking the clock scaling lock, surround the
command queueing code with an RCU reader lock and call synchronize_rcu().
This patch prepares for removal of the clock scaling lock.
Link: https://lore.kernel.org/r/20211203231950.193369-16-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 1a5665fc8d ("scsi: ufs: core: WLUN suspend SSU/enter hibern8 fail recovery")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcd5b7637c ]
Reduce the START STOP UNIT command timeout to one second since on Android
devices a kernel panic is triggered if an attempt to suspend the system
takes more than 20 seconds. One second should be enough for the START STOP
UNIT command since this command completes in less than a millisecond for
the UFS devices I have access to.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f2c96420c ]
The current power mode change timeout (180 s) is so large that it can cause
a watchdog timer to fire. Reduce the power mode change timeout to 10
seconds.
Link: https://lore.kernel.org/r/20220811234401.1957911-1-bvanassche@acm.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6d17a112e9 upstream.
Link lost is treated as fatal error with commit c99b9b2301 ("scsi: ufs:
Treat link loss as fatal error"), but the event isn't registered as
interrupt source. Enable it.
Link: https://lore.kernel.org/r/1659404551-160958-1-git-send-email-kwmad.kim@samsung.com
Fixes: c99b9b2301 ("scsi: ufs: Treat link loss as fatal error")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f54912b228 upstream.
If CONFIG_PM_SLEEP is not set.
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-, will fail:
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_vreg_fix_vcc’:
drivers/ufs/host/ufs-mediatek.c:688:46: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘long unsigned int’ [-Wformat=]
snprintf(vcc_name, MAX_VCC_NAME, "vcc-opt%u", res.a1);
~^ ~~~~~~
%lu
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_suspend’:
drivers/ufs/host/ufs-mediatek.c:1371:8: error: implicit declaration of function ‘ufshcd_system_suspend’; did you mean ‘ufs_mtk_system_suspend’? [-Werror=implicit-function-declaration]
ret = ufshcd_system_suspend(dev);
^~~~~~~~~~~~~~~~~~~~~
ufs_mtk_system_suspend
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_resume’:
drivers/ufs/host/ufs-mediatek.c:1386:9: error: implicit declaration of function ‘ufshcd_system_resume’; did you mean ‘ufs_mtk_system_resume’? [-Werror=implicit-function-declaration]
return ufshcd_system_resume(dev);
^~~~~~~~~~~~~~~~~~~~
ufs_mtk_system_resume
cc1: some warnings being treated as errors
The declaration of func "ufshcd_system_suspend()" depends on
CONFIG_PM_SLEEP, so the function wrapper ufs_mtk_system_suspend() should
wrapped by CONFIG_PM_SLEEP too.
Link: https://lore.kernel.org/r/20220619115432.205504-1-renzhijie2@huawei.com
Fixes: 3fd23b8dfb ("scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulators")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[only take the suspend/resume portion of the commit - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3fd23b8dfb ]
Currently the LPM configurations of device regulators may not work since
VCC is not disabled yet while ufs_mtk_vreg_set_lpm() is executed.
Fix this by changing the timing of invoking ufs_mtk_vreg_set_lpm().
Link: https://lore.kernel.org/r/20220616053725.5681-5-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 00511d2abf upstream.
After ufshcd_wl_shutdown() set device power off and link off,
ufshcd_shutdown() could turn off clock/power. Also remove
pm_runtime_get_sync.
The reason why it is safe to remove pm_runtime_get_sync() is because:
- ufshcd_wl_shutdown() -> pm_runtime_get_sync() will resume hba->dev too.
- device resume(turn on clk/power) is not required, even if device is in
RPM_SUSPENDED.
Link: https://lore.kernel.org/r/20220727030526.31022-1-peter.wang@mediatek.com
Fixes: b294ff3e34 ("scsi: ufs: core: Enable power management for wlun")
Cc: <stable@vger.kernel.org> # 5.15.x
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3435afba8 upstream.
In ufshcd_populate_vreg(), we should hold the reference returned by
of_parse_phandle() and then use it to call of_node_put() for refcount
balance.
Link: https://lore.kernel.org/r/20220719071529.1081166-1-windhl@126.com
Fixes: aa49761309 ("ufs: Add regulator enable support")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2ae57c9950 ]
Commit '3b5f3c0d0548 ("scsi: ufs: core: Tidy up WB configuration code")'
changed the log level of the write boost enable/disable notification from
debug to info. This results in a lot of noise in the kernel log during
normal operation.
Drop it back to debug level to avoid this.
Link: https://lore.kernel.org/r/20220709000027.3929970-1-bjorn.andersson@linaro.org
Fixes: 3b5f3c0d05 ("scsi: ufs: core: Tidy up WB configuration code")
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8eecddfca3 upstream.
In ufs_qcom_dev_ref_clk_ctrl(), it was noted that the ref_clk needs to be
stable for at least 1us. Even though there is wmb() to make sure the write
gets "completed", there is no guarantee that the write actually reached the
UFS device. There is a good chance that the write could be stored in a
Write Buffer (WB). In that case, even though the CPU waits for 1us, the
ref_clk might not be stable for that period.
So lets do a readl() to make sure that the previous write has reached the
UFS device before udelay().
Also, the wmb() after writel_relaxed() is not really needed. Both writel()
and readl() are ordered on all architectures and the CPU won't speculate
instructions after readl() due to the in-built control dependency with read
value on weakly ordered architectures. So it can be safely removed.
Link: https://lore.kernel.org/r/20220504084212.11605-4-manivannan.sadhasivam@linaro.org
Fixes: f06fcc7155 ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Cc: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ef60031022 ]
Some devices may return invalid or zeroed data during an UIC error
condition. In addition, reading these SFRs will clear them. This means the
subsequent error handling will not be able to see them and therefore no
error handling will be scheduled.
Skip reading these SFRs in ufshcd_dump_regs().
Link: https://lore.kernel.org/r/1648689845-33521-1-git-send-email-kwmad.kim@samsung.com
Fixes: d672475664 ("scsi: ufs: Use explicit access size in ufshcd_dump_regs")
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bee40dc167 ]
Clearing hba->is_sys_suspended if ufs_qcom_resume() succeeds is wrong. That
variable must only be cleared if all actions involved in a resume succeed.
Hence remove the statement that clears hba->is_sys_suspended from
ufs_qcom_resume().
Link: https://lore.kernel.org/r/20220419225811.4127248-23-bvanassche@acm.org
Fixes: 81c0fc51b7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75b8715e20 ]
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync() and
pm_runtime_put_noidle(). This change is just to simplify the code, no
actual functional changes.
Link: https://lore.kernel.org/r/20220420090353.2588804-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5d92b6440 ]
Fix referencing sense data when it is invalid. When the length of the data
segment is 0, there is no valid information in the rsp field, so
ufshpb_rsp_upiu() is returned without additional operation.
Link: https://lore.kernel.org/r/252651381.41652940482659.JavaMail.epsvc@epcpadp4
Fixes: 4b5f49079c ("scsi: ufs: ufshpb: L2P map management for HPB read")
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2bd3b6b759 upstream.
When ufs initializes without scmd->device->sector_size set, scsi_get_lba()
will get a wrong shift number and trigger an ubsan error. The shift
exponent 4294967286 is too large for the 64-bit type 'sector_t' (aka
'unsigned long long').
Call scsi_get_lba() only when opcode is READ_10/WRITE_10/UNMAP.
Link: https://lore.kernel.org/r/20220307111752.10465-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4049f7acef upstream.
Add PCI ID and callbacks to support Intel Meteor Lake (MTL).
Link: https://lore.kernel.org/r/20220404055038.2208051-1-adrian.hunter@intel.com
Cc: stable@vger.kernel.org # v5.15+
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bfb7789bcb ]
The list iterator is always non-NULL so the check 'if (!rgn)' is always
false and the dev_err() is never called. Move the check outside the loop
and determine if 'victim_rgn' is NULL, to fix this bug.
Link: https://lore.kernel.org/r/20220320150733.21824-1-xiam0nd.tong@gmail.com
Fixes: 4b5f49079c ("scsi: ufs: ufshpb: L2P map management for HPB read")
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 71bb9ab6e3 upstream.
Kernel messages produced during runtime PM can cause a never-ending cycle
because user space utilities (e.g. journald or rsyslog) write the messages
back to storage, causing runtime resume, more messages, and so on.
Messages that tell of things that are expected to happen, are arguably
unnecessary, so suppress them.
UFS driver messages are changes to from dev_err() to dev_dbg() which means
they will not display unless activated by dynamic debug of building with
-DDEBUG.
sdev->silence_suspend is set to skip messages from sd_suspend_common()
"Synchronizing SCSI cache", "Stopping disk" and scsi_report_sense()
"Power-on or device reset occurred" message (Note, that message appears
when the LUN is accessed after runtime PM, not during runtime PM)
Example messages from Ubuntu 21.10:
$ dmesg | tail
[ 1620.380071] ufshcd 0000:00:12.5: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[ 1620.408825] ufshcd 0000:00:12.5: ufshcd_print_pwr_info:[RX, TX]: gear=[4, 4], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[ 1620.409020] ufshcd 0000:00:12.5: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
[ 1620.409524] sd 0:0:0:0: Power-on or device reset occurred
[ 1622.938794] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1622.939184] ufs_device_wlun 0:0:0:49488: Power-on or device reset occurred
[ 1625.183175] ufshcd 0000:00:12.5: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[ 1625.208041] ufshcd 0000:00:12.5: ufshcd_print_pwr_info:[RX, TX]: gear=[4, 4], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[ 1625.208311] ufshcd 0000:00:12.5: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
[ 1625.209035] sd 0:0:0:0: Power-on or device reset occurred
Note for stable: depends on patch "scsi: core: sd: Add silence_suspend flag
to suppress some PM messages".
Link: https://lore.kernel.org/r/20220228113652.970857-3-adrian.hunter@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 945c3cca05 upstream.
The following deadlock has been observed on a test setup:
- All tags allocated
- The SCSI error handler calls ufshcd_eh_host_reset_handler()
- ufshcd_eh_host_reset_handler() queues work that calls
ufshcd_err_handler()
- ufshcd_err_handler() locks up as follows:
Workqueue: ufs_eh_wq_0 ufshcd_err_handler.cfi_jt
Call trace:
__switch_to+0x298/0x5d8
__schedule+0x6cc/0xa94
schedule+0x12c/0x298
blk_mq_get_tag+0x210/0x480
__blk_mq_alloc_request+0x1c8/0x284
blk_get_request+0x74/0x134
ufshcd_exec_dev_cmd+0x68/0x640
ufshcd_verify_dev_init+0x68/0x35c
ufshcd_probe_hba+0x12c/0x1cb8
ufshcd_host_reset_and_restore+0x88/0x254
ufshcd_reset_and_restore+0xd0/0x354
ufshcd_err_handler+0x408/0xc58
process_one_work+0x24c/0x66c
worker_thread+0x3e8/0xa4c
kthread+0x150/0x1b4
ret_from_fork+0x10/0x30
Fix this lockup by making ufshcd_exec_dev_cmd() allocate a reserved
request.
Link: https://lore.kernel.org/r/20211203231950.193369-10-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d77ea8226b upstream.
Commit 7252a36030 ("scsi: ufs: Avoid busy-waiting by eliminating tag
conflicts") guarantees that 'tag' is not in use by any SCSI command.
Remove the check that returns early if a conflict occurs.
Link: https://lore.kernel.org/r/20211203231950.193369-6-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c99b9b2301 ]
This event is raised when link is lost as specified in UFSHCI spec and that
means communication is not possible. Thus initializing UFS interface needs
to be done.
Make UFS driver considers Link Lost as fatal in the INT_FATAL_ERRORS
mask. This will trigger a host reset whenever a link lost interrupt occurs.
Link: https://lore.kernel.org/r/1642743475-54275-1-git-send-email-kwmad.kim@samsung.com
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad6c8a4264 ]
The return value of ufshcd_set_dev_pwr_mode() is passed to device PM
core. However, the function currently returns a SCSI result which the PM
core doesn't understand. This might lead to unexpected behaviors in
userland; a platform reset was observed in Android.
Use a generic error code for SSU failures.
Link: https://lore.kernel.org/r/1642743182-54098-1-git-send-email-kwmad.kim@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a65b32748f ]
devm_kstrdup() returns pointer to allocated string on success, NULL on
failure. So it is better to check the return value of it.
Link: https://lore.kernel.org/r/tencent_4257E15D4A94FF9020DDCC4BB9B21C041408@qq.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3ba880a12d upstream.
The function regulator_get() returns an error pointer. Use IS_ERR() to
validate the return value.
Link: https://lore.kernel.org/r/20211222070930.9449-1-linmq006@gmail.com
Fixes: cf137b3ea4 ("scsi: ufs-mediatek: Support VA09 regulator operations")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3489c34bd0 ]
Fix the following kernel crash:
Unable to handle kernel paging request at virtual address ffffffc91e735000
Call trace:
__queue_work+0x26c/0x624
queue_work_on+0x6c/0xf0
ufshcd_hold+0x12c/0x210
__ufshcd_wl_suspend+0xc0/0x400
ufshcd_wl_shutdown+0xb8/0xcc
device_shutdown+0x184/0x224
kernel_restart+0x4c/0x124
__arm64_sys_reboot+0x194/0x264
el0_svc_common+0xc8/0x1d4
do_el0_svc+0x30/0x8c
el0_svc+0x20/0x30
el0_sync_handler+0x84/0xe4
el0_sync+0x1bc/0x1c0
Fix this crash by ungating the clock before destroying the work queue on
which clock gating work is queued.
Link: https://lore.kernel.org/r/20211203231950.193369-15-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21ad0e4908 ]
The driver data pointer must be set before any callbacks are registered
that use that pointer. Hence move the initialization of that pointer from
after the ufshcd_init() call to inside ufshcd_init().
Link: https://lore.kernel.org/r/20211203231950.193369-7-bvanassche@acm.org
Fixes: 3b1d05807a ("[SCSI] ufs: Segregate PCI Specific Code")
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit af21c3fd5b upstream.
Commit 57d104c153 ("ufs: add UFS power management support") made the UFS
driver submit a REQUEST SENSE command before submitting a power management
command to a WLUN to clear the POWER ON unit attention. Instead of
submitting a REQUEST SENSE command before submitting a power management
command, retry the power management command until it succeeds.
This is the preparation to get rid of all UNIT ATTENTION code which should
be handled by users.
Link: https://lore.kernel.org/r/20211001182015.1347587-2-jaegeuk@kernel.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7dc9fb47bc upstream.
Add PCI ID and callbacks to support Intel Alder Lake.
Link: https://lore.kernel.org/r/20211124204218.1784559-1-adrian.hunter@intel.com
Cc: stable@vger.kernel.org # v5.15+
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5cb37a2635 ]
hba->outstanding_tasks, which is read under host_lock spinlock, tells the
interrupt handler what task management tags are in use by the driver. The
doorbell register bits indicate which tags are in use by the hardware. A
doorbell bit that is 0 is because the bit has yet to be set by the driver,
or because the task is complete. It is only possible to disambiguate the 2
cases, if reading/writing the doorbell register is synchronized with
reading/writing hba->outstanding_tasks.
For that reason, reading REG_UTP_TASK_REQ_DOOR_BELL must be done under
spinlock.
Link: https://lore.kernel.org/r/20211108064815.569494-3-adrian.hunter@intel.com
Fixes: f5ef336fd2 ("scsi: ufs: core: Fix task management completion")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 886fe2915c ]
__ufshcd_issue_tm_cmd() clears req->end_io_data after timing out, which
races with the completion function ufshcd_tmc_handler() which expects
req->end_io_data to have a value.
Note __ufshcd_issue_tm_cmd() and ufshcd_tmc_handler() are already
synchronized using hba->tmf_rqs and hba->outstanding_tasks under the
host_lock spinlock.
It is also not necessary (nor typical) to clear req->end_io_data because
the block layer does it before allocating out requests e.g. via
blk_get_request().
So fix by not clearing it.
Link: https://lore.kernel.org/r/20211108064815.569494-2-adrian.hunter@intel.com
Fixes: f5ef336fd2 ("scsi: ufs: core: Fix task management completion")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ff1f6b6ba ]
The following has been observed on a test setup:
WARNING: CPU: 4 PID: 250 at drivers/scsi/ufs/ufshcd.c:2737 ufshcd_queuecommand+0x468/0x65c
Call trace:
ufshcd_queuecommand+0x468/0x65c
scsi_send_eh_cmnd+0x224/0x6a0
scsi_eh_test_devices+0x248/0x418
scsi_eh_ready_devs+0xc34/0xe58
scsi_error_handler+0x204/0x80c
kthread+0x150/0x1b4
ret_from_fork+0x10/0x30
That warning is triggered by the following statement:
WARN_ON(lrbp->cmd);
Fix this warning by clearing lrbp->cmd from the abort handler.
Link: https://lore.kernel.org/r/20211104181059.4129537-1-bvanassche@acm.org
Fixes: 7a3e97b0dc ("[SCSI] ufshcd: UFS Host controller driver")
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ec5128a8b ]
The spec recommends that for transfer length larger than the max-single-cmd
attribute (bMAX_DATA_SIZE_FOR_HPB_SINGLE_CMD) it is possible to couple
pre-requests with the HPB-READ command. Being a recommendation, using
pre-requests can be perceived merely as a means of optimization. A common
practice was to send pre-requests for chunks within some interval, and
leave the READ10 untouched if larger.
Now that the pre-request flows have been removed, all the commands are
single commands. Properly handle this attribute and do not send HPB-READ
for transfer lengths larger than max-single-cmd.
[mkp: resolve conflict]
Fixes: 09d9e4d041 ("scsi: ufs: ufshpb: Remove HPB2.0 flows")
Link: https://lore.kernel.org/r/20211031123654.17719-1-avri.altman@wdc.com
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrew Halaney
Abel Vesa
Manivannan Sadhasivam
Bart Van Assche
Daniel Mentz
Kiwoong Kim
Adrian Hunter
Keoseong Park
Adrien Thierry
Johan Hovold
Peter Wang
Ren Zhijie
Po-Wen Kao
Liang He
Bjorn Andersson
Minghao Chi
Daejun Park
Xiaomeng Tong
Xiaoke Wang
Miaoqian Lin
Jaegeuk Kim
Avri Altman