Граф коммитов

50037 Коммитов

Автор SHA1 Сообщение Дата
David Ahern 2cbb4ea7de net: Only honor ifindex in IP_PKTINFO if non-0
Only allow ifindex from IP_PKTINFO to override SO_BINDTODEVICE settings
if the index is actually set in the message.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-06 16:36:44 -05:00
Linus Torvalds 547046141f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Use an appropriate TSQ pacing shift in mac80211, from Toke
    Høiland-Jørgensen.

 2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk
    in ip6_route_me_harder, from Eric Dumazet.

 3) Fix several shutdown races and similar other problems in l2tp, from
    James Chapman.

 4) Handle missing XDP flush properly in tuntap, for real this time.
    From Jason Wang.

 5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel
    Borkmann.

 6) Fix phy_resume() locking, from Andrew Lunn.

 7) IFLA_MTU values are ignored on newlink for some tunnel types, fix
    from Xin Long.

 8) Revert F-RTO middle box workarounds, they only handle one dimension
    of the problem. From Yuchung Cheng.

 9) Fix socket refcounting in RDS, from Ka-Cheong Poon.

10) Don't allow ppp unit registration to an unregistered channel, from
    Guillaume Nault.

11) Various hv_netvsc fixes from Stephen Hemminger.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits)
  hv_netvsc: propagate rx filters to VF
  hv_netvsc: filter multicast/broadcast
  hv_netvsc: defer queue selection to VF
  hv_netvsc: use napi_schedule_irqoff
  hv_netvsc: fix race in napi poll when rescheduling
  hv_netvsc: cancel subchannel setup before halting device
  hv_netvsc: fix error unwind handling if vmbus_open fails
  hv_netvsc: only wake transmit queue if link is up
  hv_netvsc: avoid retry on send during shutdown
  virtio-net: re enable XDP_REDIRECT for mergeable buffer
  ppp: prevent unregistered channels from connecting to PPP units
  tc-testing: skbmod: fix match value of ethertype
  mlxsw: spectrum_switchdev: Check success of FDB add operation
  net: make skb_gso_*_seglen functions private
  net: xfrm: use skb_gso_validate_network_len() to check gso sizes
  net: sched: tbf: handle GSO_BY_FRAGS case in enqueue
  net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len
  rds: Incorrect reference counting in TCP socket creation
  net: ethtool: don't ignore return from driver get_fecparam method
  vrf: check forwarding on the original netdevice when generating ICMP dest unreachable
  ...
2018-03-05 11:29:24 -08:00
Daniel Axtens a4a77718ee net: make skb_gso_*_seglen functions private
They're very hard to use properly as they do not consider the
GSO_BY_FRAGS case. Code should use skb_gso_validate_network_len
and skb_gso_validate_mac_len as they do consider this case.

Make the seglen functions static, which stops people using them
outside of skbuff.c

Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04 17:49:17 -05:00
Daniel Axtens 80f5974d15 net: xfrm: use skb_gso_validate_network_len() to check gso sizes
Replace skb_gso_network_seglen() with
skb_gso_validate_network_len(), as it considers the GSO_BY_FRAGS
case.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04 17:49:17 -05:00
Daniel Axtens ee78bbef8d net: sched: tbf: handle GSO_BY_FRAGS case in enqueue
tbf_enqueue() checks the size of a packet before enqueuing it.
However, the GSO size check does not consider the GSO_BY_FRAGS
case, and so will drop GSO SCTP packets, causing a massive drop
in throughput.

Use skb_gso_validate_mac_len() instead, as it does consider that
case.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04 17:49:17 -05:00
Daniel Axtens 779b7931b2 net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len
If you take a GSO skb, and split it into packets, will the network
length (L3 headers + L4 headers + payload) of those packets be small
enough to fit within a given MTU?

skb_gso_validate_mtu gives you the answer to that question. However,
we recently added to add a way to validate the MAC length of a split GSO
skb (L2+L3+L4+payload), and the names get confusing, so rename
skb_gso_validate_mtu to skb_gso_validate_network_len

Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04 17:49:17 -05:00
David S. Miller 4e00f5d5f9 Here are some batman-adv bugfixes:
- fix skb checksum issues, by Matthias Schiffer (2 patches)
 
  - fix exception handling when dumping data objects through netlink,
    by Sven Eckelmann (4 patches)
 
  - fix handling of interface indices, by Sven Eckelmann
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAlqZjskWHHN3QHNpbW9u
 d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoZgAEADcXmuvwW+QVU0L6N8ZDV7Titdp
 oIK+w2XDPLa2DcIkJ8ZAGJSK4ZZBrye/jAaRL/1CpBQiGDgP6pGodSihDPNUqCjs
 aqw8Zrwfg6BAvIeEFp3ThkCB89MADk6tMRXM4wZ3daNJvfCgHEUZeSl/1/PWWQmq
 yBn+DMeXZPOPJZgTTPMQUQ11kpf7UxtT4T9N8lq0KH6ISTbaZChPFlpPPIivpG+9
 JLjH40v8BErpIAsZHT2LJ/JPDRPXXul61p3y2sdnVnqUuSUnsc/ElJGLARXNId8P
 tkKtOONlZEwnt9ZrXOLqeqxzN+KFs97JSNIuap/hRfpgbG+Qqn4pePiIQVXNHMUC
 eBUfbGSWNtRDX/JXcwk6O4nMkTX79UDq97npcDv5sTkWLcIeznacqpXJCA8+2E05
 3F34XTDr0HY4QTxDQSEOfQ6qwo7qCxhc8u2Mr8RYNtzSiyRYS3Sy8jdFMMK/RgqT
 ggR8mIdR9MSRYhN0VFVHWWL7NL/OImke9ALvb4KioDbvDTFMFhsa/Pp1+K/NE3fK
 /E5mwicFFUB0MUmRnZiuN9gXPOy06fWOShouMgqF86Ofx4QpmT/Ph/gGK/HgFFKq
 SEfU6UunC3r6BISE4Zu5O7xTEH+AQhEZgyeSTTrTr+HLfNkvyqwGIlhG1HXzyCTx
 KWA50ikvjiKGeOCoMA==
 =tcl9
 -----END PGP SIGNATURE-----

Merge tag 'batadv-net-for-davem-20180302' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - fix skb checksum issues, by Matthias Schiffer (2 patches)

 - fix exception handling when dumping data objects through netlink,
   by Sven Eckelmann (4 patches)

 - fix handling of interface indices, by Sven Eckelmann
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-03 23:52:49 -05:00
David S. Miller 4a0c7191c7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

1) Put back reference on CLUSTERIP configuration structure from the
   error path, patch from Florian Westphal.

2) Put reference on CLUSTERIP configuration instead of freeing it,
   another cpu may still be walking over it, also from Florian.

3) Refetch pointer to IPv6 header from nf_nat_ipv6_manip_pkt() given
   packet manipulation may reallocation the skbuff header, from Florian.

4) Missing match size sanity checks in ebt_among, from Florian.

5) Convert BUG_ON to WARN_ON in ebtables, from Florian.

6) Sanity check userspace offsets from ebtables kernel, from Florian.

7) Missing checksum replace call in flowtable IPv4 DNAT, from Felix
   Fietkau.

8) Bump the right stats on checksum error from bridge netfilter,
   from Taehee Yoo.

9) Unset interface flag in IPv6 fib lookups otherwise we get
   misleading routing lookup results, from Florian.

10) Missing sk_to_full_sk() in ip6_route_me_harder() from Eric Dumazet.

11) Don't allow devices to be part of multiple flowtables at the same
    time, this may break setups.

12) Missing netlink attribute validation in flowtable deletion.

13) Wrong array index in nf_unregister_net_hook() call from error path
    in flowtable addition path.

14) Fix FTP IPVS helper when NAT mangling is in place, patch from
    Julian Anastasov.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-02 20:32:15 -05:00
David S. Miller d69242bf20 Three more patches:
* fix for a regression in 4-addr mode with fast-RX
  * fix for a Kconfig problem with the new regdb
  * fix for the long-standing TCP performance issue in
    wifi using the new sk_pacing_shift_update()
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAlqZEcoACgkQB8qZga/f
 l8SfMw//USsQzokuZOPNW4kI8ntVmp3lPRcIKFOP/CCbC+vuR9nwDE1hNPbGAiBY
 SN+ALcF9mv96vVFBvpVp1eZMLBz07+tBqWHCBkbAhHeZ+cEo0VfNoOvyY7mqQtsS
 OsKfj0xG0M9+aG/bPLiSZJNvvcPZxbtVwE31zVM0Xl6ogJ6/98t5z+wlbFFvLbOF
 e8O/FiO4x2MAY27ITdZepaa7OnS2Jprcoae7csERBH5siqX9jFoH6PDLQObscQZ/
 XBHEvOy2NCZrw0B9hDKexIGvwzLgfnyePjweI8B59p+unBSFOXNNoIo3yux4aFcH
 WmNQJ11PYpVffk8BS97HmeQmIta4TaFNP0OAUc+aTDZiDRxCjMzQF9dMehxXwR2N
 nqeE0wa0LeM+HIH5HFf7iUhv5ORy64eI5mt1HRTzTB4cLRbpD5OPwkdwN94ck4fs
 AY8uN2sgZotYOFtrOt4X0HNoU5RqwI7c6a++n75HRafbeoa1uSQm9NlJcPyLD9J9
 eAZjVQRC70HBP3PSuUgqzVZyS/6TrT2D0Gan2S555Bao0iA/1Vq59VDn+pfftJsN
 8T6d0BM3clv/VYYkqdzP3pFPrzJT/XqWGkRcpfnUBpmTxTkZgkWOpbpTVBCunje7
 Xy1zP8itH3bm4/A+zbNUO3H4I/WrUsOLTyEqIJZatIOfnDrhne0=
 =d3er
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-for-davem-2018-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Three more patches:
 * fix for a regression in 4-addr mode with fast-RX
 * fix for a Kconfig problem with the new regdb
 * fix for the long-standing TCP performance issue in
   wifi using the new sk_pacing_shift_update()
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-02 09:47:39 -05:00
Ka-Cheong Poon 84eef2b218 rds: Incorrect reference counting in TCP socket creation
Commit 0933a578cd ("rds: tcp: use sock_create_lite() to create the
accept socket") has a reference counting issue in TCP socket creation
when accepting a new connection.  The code uses sock_create_lite() to
create a kernel socket.  But it does not do __module_get() on the
socket owner.  When the connection is shutdown and sock_release() is
called to free the socket, the owner's reference count is decremented
and becomes incorrect.  Note that this bug only shows up when the socket
owner is configured as a kernel module.

v2: Update comments

Fixes: 0933a578cd ("rds: tcp: use sock_create_lite() to create the accept socket")
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-02 09:40:27 -05:00
Edward Cree a6d50512b4 net: ethtool: don't ignore return from driver get_fecparam method
If ethtool_ops->get_fecparam returns an error, pass that error on to the
 user, rather than ignoring it.

Fixes: 1a5f3da20b ("net: ethtool: add support for forward error correction modes")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 21:41:06 -05:00
Stephen Suryaputra e2c0dc1f1d vrf: check forwarding on the original netdevice when generating ICMP dest unreachable
When ip_error() is called the device is the l3mdev master instead of the
original device. So the forwarding check should be on the original one.

Changes from v2:
- Handle the original device disappearing (per David Ahern)
- Minimize the change in code order

Changes from v1:
- Only need to reset the device on which __in_dev_get_rcu() is done (per
  David Ahern).

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 21:40:22 -05:00
Mike Manning 50d629e7a8 net: allow interface to be set into VRF if VLAN interface in same VRF
Setting an interface into a VRF fails with 'RTNETLINK answers: File
exists' if one of its VLAN interfaces is already in the same VRF.
As the VRF is an upper device of the VLAN interface, it is also showing
up as an upper device of the interface itself. The solution is to
restrict this check to devices other than master. As only one master
device can be linked to a device, the check in this case is that the
upper device (VRF) being linked to is not the same as the master device
instead of it not being any one of the upper devices.

The following example shows an interface ens12 (with a VLAN interface
ens12.10) being set into VRF green, which behaves as expected:

  # ip link add link ens12 ens12.10 type vlan id 10
  # ip link set dev ens12 master vrfgreen
  # ip link show dev ens12
    3: ens12: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
       master vrfgreen state UP mode DEFAULT group default qlen 1000
       link/ether 52:54:00:4c:a0:45 brd ff:ff:ff:ff:ff:ff

But if the VLAN interface has previously been set into the same VRF,
then setting the interface into the VRF fails:

  # ip link set dev ens12 nomaster
  # ip link set dev ens12.10 master vrfgreen
  # ip link show dev ens12.10
    39: ens12.10@ens12: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
    qdisc noqueue master vrfgreen state UP mode DEFAULT group default
    qlen 1000 link/ether 52:54:00:4c:a0:45 brd ff:ff:ff:ff:ff:ff
  # ip link set dev ens12 master vrfgreen
    RTNETLINK answers: File exists

The workaround is to move the VLAN interface back into the default VRF
beforehand, but it has to be shut first so as to avoid the risk of
traffic leaking from the VRF. This fix avoids needing this workaround.

Signed-off-by: Mike Manning <mmanning@att.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 21:25:29 -05:00
Arnd Bergmann 773daa3caf net: ipv4: avoid unused variable warning for sysctl
The newly introudced ip_min_valid_pmtu variable is only used when
CONFIG_SYSCTL is set:

net/ipv4/route.c:135:12: error: 'ip_min_valid_pmtu' defined but not used [-Werror=unused-variable]

This moves it to the other variables like it, to avoid the harmless
warning.

Fixes: c7272c2f12 ("net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 13:38:22 -05:00
Julian Anastasov 8a949fff03 ipvs: remove IPS_NAT_MASK check to fix passive FTP
The IPS_NAT_MASK check in 4.12 replaced previous check for nfct_nat()
which was needed to fix a crash in 2.6.36-rc, see
commit 7bcbf81a22 ("ipvs: avoid oops for passive FTP").
But as IPVS does not set the IPS_SRC_NAT and IPS_DST_NAT bits,
checking for IPS_NAT_MASK prevents PASV response to be properly
mangled and blocks the transfer. Remove the check as it is not
needed after 3.12 commit 41d73ec053 ("netfilter: nf_conntrack:
make sequence number adjustments usuable without NAT") which
changes nfct_nat() with nfct_seqadj() and especially after 3.13
commit b25adce160 ("ipvs: correct usage/allocation of seqadj
ext in ipvs").

Thanks to Li Shuang and Florian Westphal for reporting the problem!

Reported-by: Li Shuang <shuali@redhat.com>
Fixes: be7be6e161 ("netfilter: ipvs: fix incorrect conflict resolution")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-28 19:48:26 +01:00
Jiri Pirko 77d270967c mlxsw: spectrum: Fix handling of resource_size_param
Current code uses global variables, adjusts them and passes pointer down
to devlink. With every other mlxsw_core instance, the previously passed
pointer values are rewritten. Fix this by de-globalize the variables and
also memcpy size_params during devlink resource registration.
Also, introduce a convenient size_param_init helper.

Fixes: ef3116e540 ("mlxsw: spectrum: Register KVD resources with devlink")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28 12:32:36 -05:00
Davide Caratti a5dcb73b96 net/smc: fix NULL pointer dereference on sock_create_kern() error path
when sock_create_kern(..., a) returns an error, 'a' might not be a valid
pointer, so it shouldn't be dereferenced to read a->sk->sk_sndbuf and
and a->sk->sk_rcvbuf; not doing that caused the following crash:

general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 4254 Comm: syzkaller919713 Not tainted 4.16.0-rc1+ #18
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:smc_create+0x14e/0x300 net/smc/af_smc.c:1410
RSP: 0018:ffff8801b06afbc8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff8801b63457c0 RCX: ffffffff85a3e746
RDX: 0000000000000004 RSI: 00000000ffffffff RDI: 0000000000000020
RBP: ffff8801b06afbf0 R08: 00000000000007c0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8801b6345c08 R14: 00000000ffffffe9 R15: ffffffff8695ced0
FS:  0000000001afb880(0000) GS:ffff8801db200000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000040 CR3: 00000001b0721004 CR4: 00000000001606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  __sock_create+0x4d4/0x850 net/socket.c:1285
  sock_create net/socket.c:1325 [inline]
  SYSC_socketpair net/socket.c:1409 [inline]
  SyS_socketpair+0x1c0/0x6f0 net/socket.c:1366
  do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x4404b9
RSP: 002b:00007fff44ab6908 EFLAGS: 00000246 ORIG_RAX: 0000000000000035
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004404b9
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000000002b
RBP: 00007fff44ab6910 R08: 0000000000000002 R09: 00007fff44003031
R10: 0000000020000040 R11: 0000000000000246 R12: ffffffffffffffff
R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000
Code: 48 c1 ea 03 80 3c 02 00 0f 85 b3 01 00 00 4c 8b a3 48 04 00 00 48
b8
00 00 00 00 00 fc ff df 49 8d 7c 24 20 48 89 fa 48 c1 ea 03 <80> 3c 02
00
0f 85 82 01 00 00 4d 8b 7c 24 20 48 b8 00 00 00 00
RIP: smc_create+0x14e/0x300 net/smc/af_smc.c:1410 RSP: ffff8801b06afbc8

Fixes: cd6851f303 smc: remote memory buffers (RMBs)
Reported-and-tested-by: syzbot+aa0227369be2dcc26ebe@syzkaller.appspotmail.com
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28 12:30:25 -05:00
Karsten Graul 2be922f316 net/smc: use link_id of server in confirm link reply
The CONFIRM LINK reply message must contain the link_id sent
by the server. And set the link_id explicitly when
initializing the link.

Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28 12:30:25 -05:00
Karsten Graul cbba07a726 net/smc: use a constant for control message length
The sizeof(struct smc_cdc_msg) evaluates to 48 bytes instead of the
required 44 bytes. We need to use the constant value of
SMC_WR_TX_SIZE to set and check the control message length.

Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28 12:30:25 -05:00
Joey Pabalinas ecc832758a net/tcp/illinois: replace broken algorithm reference link
The link to the pdf containing the algorithm description is now a
dead link; it seems http://www.ifp.illinois.edu/~srikant/ has been
moved to https://sites.google.com/a/illinois.edu/srikant/ and none of
the original papers can be found there...

I have replaced it with the only working copy I was able to find.

n.b. there is also a copy available at:

http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.296.6350&rep=rep1&type=pdf

However, this seems to only be a *cached* version, so I am unsure
exactly how reliable that link can be expected to remain over time
and have decided against using that one.

Signed-off-by: Joey Pabalinas <joeypabalinas@gmail.com>

 1 file changed, 1 insertion(+), 1 deletion(-)

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28 12:03:47 -05:00
Soheil Hassas Yeganeh a27fd7a8ed tcp: purge write queue upon RST
When the connection is reset, there is no point in
keeping the packets on the write queue until the connection
is closed.

RFC 793 (page 70) and RFC 793-bis (page 64) both suggest
purging the write queue upon RST:
https://tools.ietf.org/html/draft-ietf-tcpm-rfc793bis-07

Moreover, this is essential for a correct MSG_ZEROCOPY
implementation, because userspace cannot call close(fd)
before receiving zerocopy signals even when the connection
is reset.

Fixes: f214f915e7 ("tcp: enable MSG_ZEROCOPY")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28 11:41:33 -05:00
Yuchung Cheng fc68e171d3 tcp: revert F-RTO extension to detect more spurious timeouts
This reverts commit 89fe18e44f.

While the patch could detect more spurious timeouts, it could cause
poor TCP performance on broken middle-boxes that modifies TCP packets
(e.g. receive window, SACK options). Since the performance gain is
much smaller compared to the potential loss. The best solution is
to fully revert the change.

Fixes: 89fe18e44f ("tcp: extend F-RTO to catch more spurious timeouts")
Reported-by: Teodor Milkov <tm@del.bg>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28 11:37:50 -05:00
Yuchung Cheng d4131f0977 tcp: revert F-RTO middle-box workaround
This reverts commit cc663f4d4c. While fixing
some broken middle-boxes that modifies receive window fields, it does not
address middle-boxes that strip off SACK options. The best solution is
to fully revert this patch and the root F-RTO enhancement.

Fixes: cc663f4d4c ("tcp: restrict F-RTO to work-around broken middle-boxes")
Reported-by: Teodor Milkov <tm@del.bg>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28 11:37:50 -05:00
Boris Pismenny c113187d38 tls: Use correct sk->sk_prot for IPV6
The tls ulp overrides sk->prot with a new tls specific proto structs.
The tls specific structs were previously based on the ipv4 specific
tcp_prot sturct.
As a result, attaching the tls ulp to an ipv6 tcp socket replaced
some ipv6 callback with the ipv4 equivalents.

This patch adds ipv6 tls proto structs and uses them when
attached to ipv6 sockets.

Fixes: 3c4d755915 ('tls: kernel TLS support')
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27 14:41:48 -05:00
Xin Long 2b3957c34b sit: fix IFLA_MTU ignored on NEWLINK
Commit 128bb975dc ("ip6_gre: init dev->mtu and dev->hard_header_len
correctly") fixed IFLA_MTU ignored on NEWLINK for ip6_gre. The same
mtu fix is also needed for sit.

Note that dev->hard_header_len setting for sit works fine, no need to
fix it. sit is actually ipv4 tunnel, it can't call ip6_tnl_change_mtu
to set mtu.

Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27 14:36:28 -05:00
Xin Long a6aa804462 ip6_tunnel: fix IFLA_MTU ignored on NEWLINK
Commit 128bb975dc ("ip6_gre: init dev->mtu and dev->hard_header_len
correctly") fixed IFLA_MTU ignored on NEWLINK for ip6_gre. The same
mtu fix is also needed for ip6_tunnel.

Note that dev->hard_header_len setting for ip6_tunnel works fine,
no need to fix it.

Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27 14:36:28 -05:00
Xin Long ffc2b6ee41 ip_gre: fix IFLA_MTU ignored on NEWLINK
It's safe to remove the setting of dev's needed_headroom and mtu in
__gre_tunnel_init, as discussed in [1], ip_tunnel_newlink can do it
properly.

Now Eric noticed that it could cover the mtu value set in do_setlink
when creating a ip_gre dev. It makes IFLA_MTU param not take effect.

So this patch is to remove them to make IFLA_MTU work, as in other
ipv4 tunnels.

  [1]: https://patchwork.ozlabs.org/patch/823504/

Fixes: c544193214 ("GRE: Refactor GRE tunneling code.")
Reported-by: Eric Garver <e@erig.me>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27 14:36:27 -05:00
Pablo Neira Ayuso 0e0d5002f8 netfilter: nf_tables: use the right index from flowtable error path
Use the right loop index, not the number of devices in the array that we
need to remove, the following message uncovered the problem:

[ 5437.044119] hook not found, pf 5 num 0
[ 5437.044140] WARNING: CPU: 2 PID: 24983 at net/netfilter/core.c:376 __nf_unregister_net_hook+0x250/0x280

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-27 19:08:17 +01:00
Jon Maloy 1b22bcad7e tipc: correct initial value for group congestion flag
In commit 60c2530696 ("tipc: fix race between poll() and
setsockopt()") we introduced a pointer from struct tipc_group to the
'group_is_connected' flag in struct tipc_sock, so that this field can
be checked without dereferencing the group pointer of the latter struct.

The initial value for this flag is correctly set to 'false' when a
group is created, but we miss the case when no group is created at
all, in which case the initial value should be 'true'. This has the
effect that SOCK_RDM/DGRAM sockets sending datagrams never receive
POLLOUT if they request so.

This commit corrects this bug.

Fixes: 60c2530696 ("tipc: fix race between poll() and setsockopt()")
Reported-by: Hoang Le <hoang.h.le@dektek.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27 11:46:03 -05:00
Arkadi Sharshevsky 3d18e4f19f devlink: Fix resource coverity errors
Fix resource coverity errors.

Fixes: d9f9b9a4d0 ("devlink: Add support for resource abstraction")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27 11:16:42 -05:00
Sabrina Dubroca c7272c2f12 net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68
According to RFC 1191 sections 3 and 4, ICMP frag-needed messages
indicating an MTU below 68 should be rejected:

    A host MUST never reduce its estimate of the Path MTU below 68
    octets.

and (talking about ICMP frag-needed's Next-Hop MTU field):

    This field will never contain a value less than 68, since every
    router "must be able to forward a datagram of 68 octets without
    fragmentation".

Furthermore, by letting net.ipv4.route.min_pmtu be set to negative
values, we can end up with a very large PMTU when (-1) is cast into u32.

Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to
unsigned ints.

Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27 11:13:36 -05:00
Arkadi Sharshevsky b9d17175ae devlink: Compare to size_new in case of resource child validation
The current implementation checks the combined size of the children with
the 'size' of the parent. The correct behavior is to check the combined
size vs the pending change and to compare vs the 'size_new'.

Fixes: d9f9b9a4d0 ("devlink: Add support for resource abstraction")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Tested-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27 10:53:02 -05:00
Romain Naour a788723636 cfg80211: add missing dependency to CFG80211 suboptions
New options introduced by the patch this fixes are still
enabled even if CFG80211 is disabled.

.config:
    # CONFIG_CFG80211 is not set
    CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
    CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
    # CONFIG_LIB80211 is not set

When CFG80211_REQUIRE_SIGNED_REGDB is enabled, it selects
SYSTEM_DATA_VERIFICATION which selects SYSTEM_TRUSTED_KEYRING
that need extract-cert tool. extract-cert needs some openssl
headers to be installed on the build machine.

Instead of adding missing "depends on CFG80211", it's
easier to use a 'if' block around all options related
to CFG80211, so do that.

Fixes: 90a53e4432 ("cfg80211: implement regdb signature checking")
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[touch up commit message a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-02-27 10:54:12 +01:00
Pablo Neira Ayuso e603ea4ba7 netfilter: nf_tables: missing attribute validation in nf_tables_delflowtable()
Return -EINVAL is mandatory attributes are missing.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-27 08:06:57 +01:00
Pablo Neira Ayuso 32fc718751 netfilter: nf_tables: return EBUSY if device already belongs to flowtable
If the netdevice is already part of a flowtable, return EBUSY. I cannot
find a valid usecase for having two flowtables bound to the same
netdevice. We can still have two flowtable where the device set is
disjoint.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-27 08:06:46 +01:00
Thomas Winter 4e994776e7 ip_tunnel: Do not use mark in skb by default
This reverts commit 5c38bd1b82.

skb->mark contains the mark the encapsulated traffic which
can result in incorrect routing decisions being made such
as routing loops if the route chosen is via tunnel itself.
The correct method should be to use tunnel->fwmark.

Signed-off-by: Thomas Winter <thomas.winter@alliedtelesis.co.nz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26 15:22:59 -05:00
Ido Schimmel 0e5a82efda bridge: Fix VLAN reference count problem
When a VLAN is added on a port, a reference is taken on the
corresponding master VLAN entry. If it does not already exist, then it
is created and a reference taken.

However, in the second case a reference is not really taken when
CONFIG_REFCOUNT_FULL is enabled as refcount_inc() is replaced by
refcount_inc_not_zero().

Fix this by using refcount_set() on a newly created master VLAN entry.

Fixes: 2512775985 ("net, bridge: convert net_bridge_vlan.refcnt from atomic_t to refcount_t")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26 15:15:53 -05:00
Ramon Fried c77f5fbbef qrtr: add MODULE_ALIAS macro to smd
Added MODULE_ALIAS("rpmsg:IPCRTR") to ensure qrtr-smd and qrtr will load
when IPCRTR channel is detected.

Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26 15:07:04 -05:00
James Chapman 28f5bfb819 l2tp: fix tunnel lookup use-after-free race
l2tp_tunnel_get walks the tunnel list to find a matching tunnel
instance and if a match is found, its refcount is increased before
returning the tunnel pointer. But when tunnel objects are destroyed,
they are on the tunnel list after their refcount hits zero. Fix this
by moving the code that removes the tunnel from the tunnel list from
the tunnel socket destructor into in the l2tp_tunnel_delete path,
before the tunnel refcount is decremented.

refcount_t: increment on 0; use-after-free.
WARNING: CPU: 3 PID: 13507 at lib/refcount.c:153 refcount_inc+0x47/0x50
Modules linked in:
CPU: 3 PID: 13507 Comm: syzbot_6e6a5ec8 Not tainted 4.16.0-rc2+ #36
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:refcount_inc+0x47/0x50
RSP: 0018:ffff8800136ffb20 EFLAGS: 00010286
RAX: dffffc0000000008 RBX: ffff880017068e68 RCX: ffffffff814d3333
RDX: 0000000000000000 RSI: ffff88001a59f6d8 RDI: ffff88001a59f6d8
RBP: ffff8800136ffb28 R08: 0000000000000000 R09: 0000000000000000
R10: ffff8800136ffab0 R11: 0000000000000000 R12: ffff880017068e50
R13: 0000000000000000 R14: ffff8800174da800 R15: 0000000000000004
FS:  00007f403ab1e700(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000205fafd2 CR3: 0000000016770000 CR4: 00000000000006e0
Call Trace:
 l2tp_tunnel_get+0x2dd/0x4e0
 pppol2tp_connect+0x428/0x13c0
 ? pppol2tp_session_create+0x170/0x170
 ? __might_fault+0x115/0x1d0
 ? lock_downgrade+0x860/0x860
 ? __might_fault+0xe5/0x1d0
 ? security_socket_connect+0x8e/0xc0
 SYSC_connect+0x1b6/0x310
 ? SYSC_bind+0x280/0x280
 ? __do_page_fault+0x5d1/0xca0
 ? up_read+0x1f/0x40
 ? __do_page_fault+0x3c8/0xca0
 SyS_connect+0x29/0x30
 ? SyS_accept+0x40/0x40
 do_syscall_64+0x1e0/0x730
 ? trace_hardirqs_off_thunk+0x1a/0x1c
 entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f403a42f259
RSP: 002b:00007f403ab1dee8 EFLAGS: 00000296 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00000000205fafe4 RCX: 00007f403a42f259
RDX: 000000000000002e RSI: 00000000205fafd2 RDI: 0000000000000004
RBP: 00007f403ab1df20 R08: 00007f403ab1e700 R09: 0000000000000000
R10: 00007f403ab1e700 R11: 0000000000000296 R12: 0000000000000000
R13: 00007ffc81906cbf R14: 0000000000000000 R15: 00007f403ab2b040
Code: 3b ff 5b 5d c3 e8 ca 5f 3b ff 80 3d 49 8e 66 04 00 75 ea e8 bc 5f 3b ff 48 c7 c7 60 69 64 85 c6 05 34 8e 66 04 01 e8 59 49 15 ff <0f> 0b eb ce 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49

Fixes: f8ccac0e44 ("l2tp: put tunnel socket release on a workqueue")
Reported-and-tested-by: syzbot+19c09769f14b48810113@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+347bd5acde002e353a36@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+6e6a5ec8de31a94cd015@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+9df43faf09bd400f2993@syzkaller.appspotmail.com
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26 12:20:37 -05:00
James Chapman d02ba2a611 l2tp: fix race in pppol2tp_release with session object destroy
pppol2tp_release uses call_rcu to put the final ref on its socket. But
the session object doesn't hold a ref on the session socket so may be
freed while the pppol2tp_put_sk RCU callback is scheduled. Fix this by
having the session hold a ref on its socket until the session is
destroyed. It is this ref that is dropped via call_rcu.

Sessions are also deleted via l2tp_tunnel_closeall. This must now also put
the final ref via call_rcu. So move the call_rcu call site into
pppol2tp_session_close so that this happens in both destroy paths. A
common destroy path should really be implemented, perhaps with
l2tp_tunnel_closeall calling l2tp_session_delete like pppol2tp_release
does, but this will be looked at later.

ODEBUG: activate active (active state 1) object type: rcu_head hint:           (null)
WARNING: CPU: 3 PID: 13407 at lib/debugobjects.c:291 debug_print_object+0x166/0x220
Modules linked in:
CPU: 3 PID: 13407 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #38
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:debug_print_object+0x166/0x220
RSP: 0018:ffff880013647a00 EFLAGS: 00010082
RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff814d3333
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88001a59f6d0
RBP: ffff880013647a40 R08: 0000000000000000 R09: 0000000000000001
R10: ffff8800136479a8 R11: 0000000000000000 R12: 0000000000000001
R13: ffffffff86161420 R14: ffffffff85648b60 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020e77000 CR3: 0000000006022000 CR4: 00000000000006e0
Call Trace:
 debug_object_activate+0x38b/0x530
 ? debug_object_assert_init+0x3b0/0x3b0
 ? __mutex_unlock_slowpath+0x85/0x8b0
 ? pppol2tp_session_destruct+0x110/0x110
 __call_rcu.constprop.66+0x39/0x890
 ? __call_rcu.constprop.66+0x39/0x890
 call_rcu_sched+0x17/0x20
 pppol2tp_release+0x2c7/0x440
 ? fcntl_setlk+0xca0/0xca0
 ? sock_alloc_file+0x340/0x340
 sock_release+0x92/0x1e0
 sock_close+0x1b/0x20
 __fput+0x296/0x6e0
 ____fput+0x1a/0x20
 task_work_run+0x127/0x1a0
 do_exit+0x7f9/0x2ce0
 ? SYSC_connect+0x212/0x310
 ? mm_update_next_owner+0x690/0x690
 ? up_read+0x1f/0x40
 ? __do_page_fault+0x3c8/0xca0
 do_group_exit+0x10d/0x330
 ? do_group_exit+0x330/0x330
 SyS_exit_group+0x22/0x30
 do_syscall_64+0x1e0/0x730
 ? trace_hardirqs_off_thunk+0x1a/0x1c
 entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f362e471259
RSP: 002b:00007ffe389abe08 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f362e471259
RDX: 00007f362e471259 RSI: 000000000000002e RDI: 0000000000000000
RBP: 00007ffe389abe30 R08: 0000000000000000 R09: 00007f362e944270
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60
R13: 00007ffe389abf50 R14: 0000000000000000 R15: 0000000000000000
Code: 8d 3c dd a0 8f 64 85 48 89 fa 48 c1 ea 03 80 3c 02 00 75 7b 48 8b 14 dd a0 8f 64 85 4c 89 f6 48 c7 c7 20 85 64 85 e
8 2a 55 14 ff <0f> 0b 83 05 ad 2a 68 04 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41

Fixes: ee40fb2e1e ("l2tp: protect sock pointer of struct pppol2tp_session with RCU")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26 12:20:36 -05:00
James Chapman d00fa9adc5 l2tp: fix races with tunnel socket close
The tunnel socket tunnel->sock (struct sock) is accessed when
preparing a new ppp session on a tunnel at pppol2tp_session_init. If
the socket is closed by a thread while another is creating a new
session, the threads race. In pppol2tp_connect, the tunnel object may
be created if the pppol2tp socket is associated with the special
session_id 0 and the tunnel socket is looked up using the provided
fd. When handling this, pppol2tp_connect cannot sock_hold the tunnel
socket to prevent it being destroyed during pppol2tp_connect since
this may itself may race with the socket being destroyed. Doing
sockfd_lookup in pppol2tp_connect isn't sufficient to prevent
tunnel->sock going away either because a given tunnel socket fd may be
reused between calls to pppol2tp_connect. Instead, have
l2tp_tunnel_create sock_hold the tunnel socket before it does
sockfd_put. This ensures that the tunnel's socket is always extant
while the tunnel object exists. Hold a ref on the socket until the
tunnel is destroyed and ensure that all tunnel destroy paths go
through a common function (l2tp_tunnel_delete) since this will do the
final sock_put to release the tunnel socket.

Since the tunnel's socket is now guaranteed to exist if the tunnel
exists, we no longer need to use sockfd_lookup via l2tp_sock_to_tunnel
to derive the tunnel from the socket since this is always
sk_user_data.

Also, sessions no longer sock_hold the tunnel socket since sessions
already hold a tunnel ref and the tunnel sock will not be freed until
the tunnel is freed. Removing these sock_holds in
l2tp_session_register avoids a possible sock leak in the
pppol2tp_connect error path if l2tp_session_register succeeds but
attaching a ppp channel fails. The pppol2tp_connect error path could
have been fixed instead and have the sock ref dropped when the session
is freed, but doing a sock_put of the tunnel socket when the session
is freed would require a new session_free callback. It is simpler to
just remove the sock_hold of the tunnel socket in
l2tp_session_register, now that the tunnel socket lifetime is
guaranteed.

Finally, some init code in l2tp_tunnel_create is reordered to ensure
that the new tunnel object's refcount is set and the tunnel socket ref
is taken before the tunnel socket destructor callbacks are set.

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 4360 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #34
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:pppol2tp_session_init+0x1d6/0x500
RSP: 0018:ffff88001377fb40 EFLAGS: 00010212
RAX: dffffc0000000000 RBX: ffff88001636a940 RCX: ffffffff84836c1d
RDX: 0000000000000045 RSI: 0000000055976744 RDI: 0000000000000228
RBP: ffff88001377fb60 R08: ffffffff84836bc8 R09: 0000000000000002
R10: ffff88001377fab8 R11: 0000000000000001 R12: 0000000000000000
R13: ffff88001636aac8 R14: ffff8800160f81c0 R15: 1ffff100026eff76
FS:  00007ffb3ea66700(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020e77000 CR3: 0000000016261000 CR4: 00000000000006f0
Call Trace:
 pppol2tp_connect+0xd18/0x13c0
 ? pppol2tp_session_create+0x170/0x170
 ? __might_fault+0x115/0x1d0
 ? lock_downgrade+0x860/0x860
 ? __might_fault+0xe5/0x1d0
 ? security_socket_connect+0x8e/0xc0
 SYSC_connect+0x1b6/0x310
 ? SYSC_bind+0x280/0x280
 ? __do_page_fault+0x5d1/0xca0
 ? up_read+0x1f/0x40
 ? __do_page_fault+0x3c8/0xca0
 SyS_connect+0x29/0x30
 ? SyS_accept+0x40/0x40
 do_syscall_64+0x1e0/0x730
 ? trace_hardirqs_off_thunk+0x1a/0x1c
 entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7ffb3e376259
RSP: 002b:00007ffeda4f6508 EFLAGS: 00000202 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000020e77012 RCX: 00007ffb3e376259
RDX: 000000000000002e RSI: 0000000020e77000 RDI: 0000000000000004
RBP: 00007ffeda4f6540 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60
R13: 00007ffeda4f6660 R14: 0000000000000000 R15: 0000000000000000
Code: 80 3d b0 ff 06 02 00 0f 84 07 02 00 00 e8 13 d6 db fc 49 8d bc 24 28 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 f
a 48 c1 ea 03 <80> 3c 02 00 0f 85 ed 02 00 00 4d 8b a4 24 28 02 00 00 e8 13 16

Fixes: 80d84ef3ff ("l2tp: prevent l2tp_tunnel_delete racing with userspace close")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26 12:20:36 -05:00
James Chapman 225eb26489 l2tp: don't use inet_shutdown on ppp session destroy
Previously, if a ppp session was closed, we called inet_shutdown to mark
the socket as unconnected such that userspace would get errors and
then close the socket. This could race with userspace closing the
socket. Instead, leave userspace to close the socket in its own time
(our session will be detached anyway).

BUG: KASAN: use-after-free in inet_shutdown+0x5d/0x1c0
Read of size 4 at addr ffff880010ea3ac0 by task syzbot_347bd5ac/8296

CPU: 3 PID: 8296 Comm: syzbot_347bd5ac Not tainted 4.16.0-rc1+ #91
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Call Trace:
 dump_stack+0x101/0x157
 ? inet_shutdown+0x5d/0x1c0
 print_address_description+0x78/0x260
 ? inet_shutdown+0x5d/0x1c0
 kasan_report+0x240/0x360
 __asan_load4+0x78/0x80
 inet_shutdown+0x5d/0x1c0
 ? pppol2tp_show+0x80/0x80
 pppol2tp_session_close+0x68/0xb0
 l2tp_tunnel_closeall+0x199/0x210
 ? udp_v6_flush_pending_frames+0x90/0x90
 l2tp_udp_encap_destroy+0x6b/0xc0
 ? l2tp_tunnel_del_work+0x2e0/0x2e0
 udpv6_destroy_sock+0x8c/0x90
 sk_common_release+0x47/0x190
 udp_lib_close+0x15/0x20
 inet_release+0x85/0xd0
 inet6_release+0x43/0x60
 sock_release+0x53/0x100
 ? sock_alloc_file+0x260/0x260
 sock_close+0x1b/0x20
 __fput+0x19f/0x380
 ____fput+0x1a/0x20
 task_work_run+0xd2/0x110
 exit_to_usermode_loop+0x18d/0x190
 do_syscall_64+0x389/0x3b0
 entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x7fe240a45259
RSP: 002b:00007fe241132df8 EFLAGS: 00000297 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007fe240a45259
RDX: 00007fe240a45259 RSI: 0000000000000000 RDI: 00000000000000a5
RBP: 00007fe241132e20 R08: 00007fe241133700 R09: 0000000000000000
R10: 00007fe241133700 R11: 0000000000000297 R12: 0000000000000000
R13: 00007ffc49aff84f R14: 0000000000000000 R15: 00007fe241141040

Allocated by task 8331:
 save_stack+0x43/0xd0
 kasan_kmalloc+0xad/0xe0
 kasan_slab_alloc+0x12/0x20
 kmem_cache_alloc+0x144/0x3e0
 sock_alloc_inode+0x22/0x130
 alloc_inode+0x3d/0xf0
 new_inode_pseudo+0x1c/0x90
 sock_alloc+0x30/0x110
 __sock_create+0xaa/0x4c0
 SyS_socket+0xbe/0x130
 do_syscall_64+0x128/0x3b0
 entry_SYSCALL_64_after_hwframe+0x26/0x9b

Freed by task 8314:
 save_stack+0x43/0xd0
 __kasan_slab_free+0x11a/0x170
 kasan_slab_free+0xe/0x10
 kmem_cache_free+0x88/0x2b0
 sock_destroy_inode+0x49/0x50
 destroy_inode+0x77/0xb0
 evict+0x285/0x340
 iput+0x429/0x530
 dentry_unlink_inode+0x28c/0x2c0
 __dentry_kill+0x1e3/0x2f0
 dput.part.21+0x500/0x560
 dput+0x24/0x30
 __fput+0x2aa/0x380
 ____fput+0x1a/0x20
 task_work_run+0xd2/0x110
 exit_to_usermode_loop+0x18d/0x190
 do_syscall_64+0x389/0x3b0
 entry_SYSCALL_64_after_hwframe+0x26/0x9b

Fixes: fd558d186d ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26 12:20:36 -05:00
James Chapman 76a6abdb25 l2tp: don't use inet_shutdown on tunnel destroy
Previously, if a tunnel was closed, we called inet_shutdown to mark
the socket as unconnected such that userspace would get errors and
then close the socket. This could race with userspace closing the
socket. Instead, leave userspace to close the socket in its own time
(our tunnel will be detached anyway).

BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
IP: __lock_acquire+0x263/0x1630
PGD 0 P4D 0
Oops: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 2 PID: 42 Comm: kworker/u8:2 Not tainted 4.15.0-rc7+ #129
Workqueue: l2tp l2tp_tunnel_del_work
RIP: 0010:__lock_acquire+0x263/0x1630
RSP: 0018:ffff88001a37fc70 EFLAGS: 00010002
RAX: 0000000000000001 RBX: 0000000000000088 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88001a37fd18 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 00000000000076fd R12: 00000000000000a0
R13: ffff88001a3722c0 R14: 0000000000000001 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88001ad00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 000000001730b000 CR4: 00000000000006e0
Call Trace:
 ? __lock_acquire+0xc77/0x1630
 ? console_trylock+0x11/0xa0
 lock_acquire+0x117/0x230
 ? lock_sock_nested+0x3a/0xa0
 _raw_spin_lock_bh+0x3a/0x50
 ? lock_sock_nested+0x3a/0xa0
 lock_sock_nested+0x3a/0xa0
 inet_shutdown+0x33/0xf0
 l2tp_tunnel_del_work+0x60/0xef
 process_one_work+0x1ea/0x5f0
 ? process_one_work+0x162/0x5f0
 worker_thread+0x48/0x3e0
 ? trace_hardirqs_on+0xd/0x10
 kthread+0x108/0x140
 ? process_one_work+0x5f0/0x5f0
 ? kthread_stop+0x2a0/0x2a0
 ret_from_fork+0x24/0x30
Code: 00 41 81 ff ff 1f 00 00 0f 87 7a 13 00 00 45 85 f6 49 8b 85
68 08 00 00 0f 84 ae 03 00 00 c7 44 24 18 00 00 00 00 e9 f0 00 00 00 <49> 81 3c
24 80 93 3f 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f
RIP: __lock_acquire+0x263/0x1630 RSP: ffff88001a37fc70
CR2: 00000000000000a0

Fixes: 309795f4be ("l2tp: Add netlink control API for L2TP")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26 12:20:36 -05:00
Chengguang Xu 937441f3a3 libceph, ceph: avoid memory leak when specifying same option several times
When parsing string option, in order to avoid memory leak we need to
carefully free it first in case of specifying same option several times.

Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-02-26 16:19:30 +01:00
Eric Dumazet 7d98386d55 netfilter: use skb_to_full_sk in ip6_route_me_harder
For some reason, Florian forgot to apply to ip6_route_me_harder
the fix that went in commit 29e09229d9 ("netfilter: use
skb_to_full_sk in ip_route_me_harder")

Fixes: ca6fb06518 ("tcp: attach SYNACK messages to request sockets instead of listener") 
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25 20:51:13 +01:00
Sven Eckelmann f22e08932c batman-adv: Fix internal interface indices types
batman-adv uses internal indices for each enabled and active interface.
It is currently used by the B.A.T.M.A.N. IV algorithm to identifify the
correct position in the ogm_cnt bitmaps.

The type for the number of enabled interfaces (which defines the next
interface index) was set to char. This type can be (depending on the
architecture) either signed (limiting batman-adv to 127 active slave
interfaces) or unsigned (limiting batman-adv to 255 active slave
interfaces).

This limit was not correctly checked when an interface was enabled and thus
an overflow happened. This was only catched on systems with the signed char
type when the B.A.T.M.A.N. IV code tried to resize its counter arrays with
a negative size.

The if_num interface index was only a s16 and therefore significantly
smaller than the ifindex (int) used by the code net code.

Both &batadv_hard_iface->if_num and &batadv_priv->num_ifaces must be
(unsigned) int to support the same number of slave interfaces as the net
core code. And the interface activation code must check the number of
active slave interfaces to avoid integer overflows.

Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25 20:19:34 +01:00
Florian Westphal 47b7e7f828 netfilter: don't set F_IFACE on ipv6 fib lookups
"fib" starts to behave strangely when an ipv6 default route is
added - the FIB lookup returns a route using 'oif' in this case.

This behaviour was inherited from ip6tables rpfilter so change
this as well.

Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1221
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25 20:15:53 +01:00
Taehee Yoo 2412d897c2 netfilter: increase IPSTATS_MIB_CSUMERRORS stat
In the ip_rcv, IPSTATS_MIB_CSUMERRORS is increased when
checksum error is occurred.
bridge netfilter routine should increase IPSTATS_MIB_CSUMERRORS.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25 20:14:18 +01:00
Sven Eckelmann fce672db54 batman-adv: Fix netlink dumping of BLA backbones
The function batadv_bla_backbone_dump_bucket must be able to handle
non-complete dumps of a single bucket. It tries to do that by saving the
latest dumped index in *idx_skip to inform the caller about the current
state.

But the caller only assumes that buckets were not completely dumped when
the return code is non-zero. This function must therefore also return a
non-zero index when the dumping of an entry failed. Otherwise the caller
will just skip all remaining buckets.

And the function must also reset *idx_skip back to zero when it finished a
bucket. Otherwise it will skip the same number of entries in the next
bucket as the previous one had.

Fixes: ea4152e117 ("batman-adv: add backbone table netlink support")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25 20:11:59 +01:00
Sven Eckelmann b0264ecdfe batman-adv: Fix netlink dumping of BLA claims
The function batadv_bla_claim_dump_bucket must be able to handle
non-complete dumps of a single bucket. It tries to do that by saving the
latest dumped index in *idx_skip to inform the caller about the current
state.

But the caller only assumes that buckets were not completely dumped when
the return code is non-zero. This function must therefore also return a
non-zero index when the dumping of an entry failed. Otherwise the caller
will just skip all remaining buckets.

And the function must also reset *idx_skip back to zero when it finished a
bucket. Otherwise it will skip the same number of entries in the next
bucket as the previous one had.

Fixes: 04f3f5bf18 ("batman-adv: add B.A.T.M.A.N. Dump BLA claims via netlink")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25 20:11:42 +01:00