Граф коммитов

36 Коммитов

Автор SHA1 Сообщение Дата
Arjan van de Ven af0a5646cb use the new async probing feature for the hyperv drivers
Recent kernels support asynchronous probing; most hyperv drivers
can be probed async easily so set the required flag for this.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03 13:02:28 +02:00
Vitaly Kuznetsov 1d10602d30 hv_utils: fix TimeSync work on pre-TimeSync-v4 hosts
It was found that ICTIMESYNCFLAG_SYNC packets are handled incorrectly
on WS2012R2, e.g. after the guest is paused and resumed its time is set
to something different from host's time. The problem is that we call
adj_guesttime() with reftime=0 for these old hosts and we don't account
for that in 'if (adj_flags & ICTIMESYNCFLAG_SYNC)' branch and
hv_set_host_time().

While we could've solved this by adding a check like
'if (ts_srv_version > TS_VERSION_3)' to hv_set_host_time() I prefer
to do some refactoring. We don't need to have two separate containers
for host samples, struct host_ts which we use for PTP is enough.

Throw away 'struct adj_time_work' and create hv_get_adj_host_time()
accessor to host_ts to avoid code duplication.

Fixes: 3716a49a81 ("hv_utils: implement Hyper-V PTP source")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25 15:42:42 +02:00
Vitaly Kuznetsov 4f9bac039a hv_utils: drop .getcrosststamp() support from PTP driver
Turns out that our implementation of .getcrosststamp() never actually
worked. Hyper-V is sending time samples every 5 seconds and this is
too much for get_device_system_crosststamp() as it's interpolation
algorithm (which nobody is currently using in kernel, btw) accounts
for a 'slow' device but we're not slow in Hyper-V, our time reference
is too far away.

.getcrosststamp() is not currently used, get_device_system_crosststamp()
almost always returns -EINVAL and client falls back to using PTP_SYS_OFFSET
so this patch doesn't change much. I also tried doing interpolation
manually (e.g. the same way hv_ptp_gettime() works and it turns out that
we're getting even lower quality:

PTP_SYS_OFFSET_PRECISE with manual interpolation:
* PHC0                     0   3    37     4  -3974ns[-5338ns] +/-  977ns
* PHC0                     0   3    77     7  +2227ns[+3184ns] +/-  576ns
* PHC0                     0   3   177    10  +3060ns[+5220ns] +/-  548ns
* PHC0                     0   3   377    12  +3937ns[+4371ns] +/- 1414ns
* PHC0                     0   3   377     6   +764ns[+1240ns] +/- 1047ns
* PHC0                     0   3   377     7  -1210ns[-3731ns] +/-  479ns
* PHC0                     0   3   377     9   +153ns[-1019ns] +/-  406ns
* PHC0                     0   3   377    12   -872ns[-1793ns] +/-  443ns
* PHC0                     0   3   377     5   +701ns[+3599ns] +/-  426ns
* PHC0                     0   3   377     5   -923ns[ -375ns] +/- 1062ns

PTP_SYS_OFFSET:
* PHC0                     0   3     7     5    +72ns[+8020ns] +/-  251ns
* PHC0                     0   3    17     5   -885ns[-3661ns] +/-  254ns
* PHC0                     0   3    37     6   -454ns[-5732ns] +/-  258ns
* PHC0                     0   3    77    10  +1183ns[+3754ns] +/-  164ns
* PHC0                     0   3   377     5   +579ns[+1137ns] +/-  110ns
* PHC0                     0   3   377     7   +501ns[+1064ns] +/-   96ns
* PHC0                     0   3   377     9  +1641ns[+3342ns] +/-  106ns
* PHC0                     0   3   377     8    -47ns[  +77ns] +/-  160ns
* PHC0                     0   3   377     5    +54ns[ +107ns] +/-  102ns
* PHC0                     0   3   377     8   -354ns[ -617ns] +/-   89ns

This fact wasn't noticed during the initial testing of the PTP device
somehow but got revealed now. Let's just drop .getcrosststamp()
implementation for now as it doesn't seem to be suitable for us.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25 15:42:42 +02:00
Dexuan Cui 5a16dfc855 Drivers: hv: util: don't forget to init host_ts.lock
Without the patch, I always get a "BUG: spinlock bad magic" warning.

Fixes: 3716a49a81 ("hv_utils: implement Hyper-V PTP source")

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-16 16:42:00 +09:00
Stephen Hemminger b71e328297 vmbus: add direct isr callback mode
Change the simple boolean batched_reading into a tri-value.
For future NAPI support in netvsc driver, the callback needs to
occur directly in interrupt handler.

Batched mode is also changed to disable host interrupts immediately
in interrupt routine (to avoid unnecessary host signals), and the
tasklet is rescheduled if more data is detected.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14 10:20:35 -08:00
K. Y. Srinivasan bb6a4db92f Drivers: hv: util: Fix a typo
Fix a typo.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:40:19 +01:00
Vitaly Kuznetsov 3716a49a81 hv_utils: implement Hyper-V PTP source
With TimeSync version 4 protocol support we started updating system time
continuously through the whole lifetime of Hyper-V guests. Every 5 seconds
there is a time sample from the host which triggers do_settimeofday[64]().
While the time from the host is very accurate such adjustments may cause
issues:
- Time is jumping forward and backward, some applications may misbehave.
- In case an NTP server runs in parallel and uses something else for time
  sync (network, PTP,...) system time will never converge.
- Systemd starts annoying you by printing "Time has been changed" every 5
  seconds to the system log.

Instead of doing in-kernel time adjustments offload the work to an
NTP client by exposing TimeSync messages as a PTP device. Users may now
decide what they want to use as a source.

I tested the solution with chrony, the config was:

 refclock PHC /dev/ptp0 poll 3 dpoll -2 offset 0

The result I'm seeing is accurate enough, the time delta between the guest
and the host is almost always within [-10us, +10us], the in-kernel solution
was giving us comparable results.

I also tried implementing PPS device instead of PTP by using not currently
used Hyper-V synthetic timers (we use only one of four for clockevent) but
with PPS source only chrony wasn't able to give me the required accuracy,
the delta often more that 100us.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:40:19 +01:00
Alex Ng 1274a690f6 Drivers: hv: Log the negotiated IC versions.
Log the negotiated IC versions.

Signed-off-by: Alex Ng <alexng@messages.microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31 11:05:59 +01:00
Alex Ng a165645413 Drivers: hv: vmbus: Use all supported IC versions to negotiate
Previously, we were assuming that each IC protocol version was tied to a
specific host version. For example, some Windows 10 preview hosts only
support v3 TimeSync even though driver assumes v4 is supported by all
Windows 10 hosts.

The guest will stop trying to negotiate even though older supported
versions may still be offered by the host.

Make IC version negotiation more robust by going through all versions
that are supported by the guest.

Fixes: 3da0401b4d ("Drivers: hv: utils: Fix the mapping between host
version and protocol to use")

Reported-by: Rolf Neugebauer <rolf.neugebauer@docker.com>
Signed-off-by: Alex Ng <alexng@messages.microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31 11:05:59 +01:00
Vitaly Kuznetsov 17244623a4 hv_util: switch to using timespec64
do_settimeofday() is deprecated, use do_settimeofday64() instead.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31 11:05:58 +01:00
K. Y. Srinivasan 305f7549c9 Drivers: hv: util: Use hv_get_current_tick() to get current tick
As part of the effort to interact with Hyper-V in an instruction set
architecture independent way, use the new API to get the current
tick.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-20 14:48:03 +01:00
Alex Ng 3da0401b4d Drivers: hv: utils: Fix the mapping between host version and protocol to use
We should intentionally declare the protocols to use for every known host
and default to using the latest protocol if the host is unknown or new.

Signed-off-by: Alex Ng <alexng@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-07 10:01:17 +01:00
Long Li 407a3aee6e hv: do not lose pending heartbeat vmbus packets
The host keeps sending heartbeat packets independent of the
guest responding to them.  Even though we respond to the heartbeat messages at
interrupt level, we can have situations where there maybe multiple heartbeat
messages pending that have not been responded to. For instance this occurs when the
VM is paused and the host continues to send the heartbeat messages.
Address this issue by draining and responding to all
the heartbeat messages that maybe pending.

Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-25 08:52:10 +02:00
Vivek yadav 3ba1eb17b6 Drivers: hv: hv_util: Avoid dynamic allocation in time synch
Under stress, we have seen allocation failure in time synch code. Avoid
this dynamic allocation.

Signed-off-by: Vivek Yadav <vyadav@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-09 13:48:23 +02:00
Alex Ng 8e1d260738 Drivers: hv: utils: Support TimeSync version 4.0 protocol samples.
This enables support for more accurate TimeSync v4 samples when hosted
under Windows Server 2016 and newer hosts.

The new time samples include a "vmreferencetime" field that represents
the guest's TSC value when the host generated its time sample. This value
lets the guest calculate the latency in receiving the time sample. The
latency is added to the sample host time prior to updating the clock.

Signed-off-by: Alex Ng <alexng@messages.microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-08 13:53:07 +02:00
Alex Ng 2e338f7e03 Drivers: hv: utils: Use TimeSync samples to adjust the clock after boot.
Only the first 50 samples after boot were being used to discipline the
clock. After the first 50 samples, any samples from the host were ignored
and the guest clock would eventually drift from the host clock.

This patch allows TimeSync-enabled guests to continuously synchronize the
clock with the host clock, even after the first 50 samples.

Signed-off-by: Alex Ng <alexng@messages.microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-08 13:53:07 +02:00
Alex Ng abeda47ebb Drivers: hv: utils: Rename version definitions to reflect protocol version.
Different Windows host versions may reuse the same protocol version when
negotiating the TimeSync, Shutdown, and Heartbeat protocols. We should only
refer to the protocol version to avoid conflating the two concepts.

Signed-off-by: Alex Ng <alexng@messages.microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-08 13:53:07 +02:00
K. Y. Srinivasan b9830d120c Drivers: hv: util: Pass the channel information during the init call
Pass the channel information to the util drivers that need to defer
reading the channel while they are processing a request. This would address
the following issue reported by Vitaly:

Commit 3cace4a616 ("Drivers: hv: utils: run polling callback always in
interrupt context") removed direct *_transaction.state = HVUTIL_READY
assignments from *_handle_handshake() functions introducing the following
race: if a userspace daemon connects before we get first non-negotiation
request from the server hv_poll_channel() won't set transaction state to
HVUTIL_READY as (!channel) condition will fail, we set it to non-NULL on
the first real request from the server.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-01 16:57:20 -08:00
K. Y. Srinivasan 5380b383ba Drivers: hv: util: On device remove, close the channel after de-initializing the service
When the offer is rescinded, vmbus_close() can free up the channel;
deinitialize the service before closing the channel.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01 19:31:02 -08:00
Dexuan Cui 1896566372 hv: hv_util: move vmbus_open() to a later place
Before the line vmbus_open() returns, srv->util_cb can be already running
and the variables, like util_fw_version, are needed by the srv->util_cb.

So we have to make sure the variables are initialized before the vmbus_open().

CC: "K. Y. Srinivasan" <kys@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01 19:30:07 -08:00
K. Y. Srinivasan 9bd2d0dfe4 Drivers: hv: util: Fix a bug in the KVP code
Add code to poll the channel since we process only one message
at a time and the host may not interrupt us. Also increase the
receive buffer size since some KVP messages are close to 8K bytes in size.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09 14:34:35 -07:00
K. Y. Srinivasan 01325476d6 Drivers: hv: Implement the file copy service
Implement the file copy service for Linux guests on Hyper-V. This permits the
host to copy a file (over VMBUS) into the guest. This facility is part of
"guest integration services" supported on the Windows platform.
Here is a link that provides additional details on this functionality:

http://technet.microsoft.com/en-us/library/dn464282.aspx

In V1 version of the patch I have addressed comments from
Olaf Hering <olaf@aepfle.de> and Dan Carpenter <dan.carpenter@oracle.com>

In V2 version of this patch I did some minor cleanup (making some globals
static). In V4 version of the patch I have addressed all of Olaf's
most recent set of comments/concerns.

In V5 version of the patch I had addressed Greg's most recent comments.
I would like to thank Greg for suggesting that I use misc device; it has
significantly simplified the code.

In V6 version of the patch I have cleaned up error message based on Olaf's
comments. I have also rebased the patch based on the current tip.

In this version of the patch, I have addressed the latest comments from Greg.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18 10:53:48 -08:00
Greg Kroah-Hartman d717349368 Merge 3.12-rc3 into char-misc-next
We need/want the mei fixes in here so we can apply other updates that
are depending on them.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-29 18:27:03 -07:00
K. Y. Srinivasan 3a4916050b Drivers: hv: util: Correctly support ws2008R2 and earlier
The current code does not correctly negotiate the version numbers for the util
driver when hosted on earlier hosts. The version numbers presented by this
driver were not compatible with the version numbers supported by Windows Server
2008. Fix this problem.

I would like to thank Olaf Hering (ohering@suse.com) for identifying the problem.

Reported-by: Olaf Hering <ohering@suse.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 14:20:21 -07:00
Peter Senna Tschudin 3173463418 hv: Change variable type to bool
The variable execute_shutdown is only assigned the values true and
false. Change its type to bool.

The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):

@exists@
type T;
identifier b;
@@
- T
+ bool
  b = ...;
  ... when any
  b = \(true\|false\)

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 08:53:23 -07:00
Olaf Hering cfc25993e8 Drivers: hv: remove HV_DRV_VERSION
Remove HV_DRV_VERSION, it has no meaning for upstream drivers.

Initially it was supposed to show the "Linux Integration Services"
version, now it is not in sync anymore with the out-of-tree drivers
available from the MSFT website.

The only place where a version string is still required is the KVP
command "IntegrationServicesVersion" which is handled by
tools/hv/hv_kvp_daemon.c. To satisfy such KVP request from the host pass
the current string to the daemon during KVP userland registration.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by:  K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-02 11:34:30 +08:00
K. Y. Srinivasan 6741335bc7 Drivers: hv: util: Fix a bug in version negotiation code for util services
The current code picked the highest version advertised by the host. WS2012 R2
has implemented a protocol version for KVP that is not compatible with prior
protocol versions of KVP. Fix the bug in the current code by explicitly specifying
the protocol version that the guest can support.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-26 16:40:41 -07:00
K. Y. Srinivasan 96dd86fa58 Drivers: hv: Add a new driver to support host initiated backup
This driver supports host initiated backup of the guest. On Windows guests,
the host can generate application consistent backups using the Windows VSS
framework. On Linux, we ensure that the backup will be file system consistent.
This driver allows the host to initiate a  "Freeze" operation on all the mounted
file systems in the guest. Once the mounted file systems in the guest are frozen,
the host snapshots the guest's file systems. Once this is done, the guest's file
systems are "thawed".

This driver has a user-level component (daemon) that invokes the appropriate
operation on all the mounted file systems in response to the requests from
the host. The duration for which the guest is frozen is very short - a few seconds.
During this interval, the diff disk is comitted.

In this version of the patch I have addressed the feedback from Olaf Herring.
Also, some of the connector related issues have been fixed.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15 12:12:36 -07:00
K. Y. Srinivasan 3dd6cb4971 Drivers: hv: Execute shutdown in a thread context
Execute the shutdown code in a thread context. With recent changes made to the
shutdown code, shutdown code cannot be invoked from an interrupt context.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25 11:17:32 -08:00
K. Y. Srinivasan d13984e5c7 Drivers: hv: Use consolidated GUID definitions
Use the consolidated GUID definitions in the util and balloon drivers.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25 11:17:31 -08:00
K. Y. Srinivasan 7ae3e03519 Drivers: hv: Turn off batched reading for util drivers
Util driver is not a performance critical driver and furthermore some
util services such as KVP can only handle one outstanding message
from the host. Turn off batched reading for util drivers.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 10:46:39 -08:00
K. Y. Srinivasan 9b5957803c Drivers: hv: Add KVP definitions for IP address injection
Add the necessary definitions for supporting the IP injection functionality.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 13:48:07 -07:00
K. Y. Srinivasan c836d0ab70 Drivers: hv: util: Properly handle version negotiations.
The current version negotiation code is not "future proof". Fix this
by allowing each service the flexibility to either specify the highest
version it can support or it can support the highest version number
the host is offering.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 08:59:31 -07:00
K. Y. Srinivasan 2939437ce8 drivers: hv: kvp: Move the contents of hv_kvp.h to hyperv.h
In preparation for consolidating all KVP related defines into a single header file
that both the kernel and user level components can use, move the contents of
hv_kvp.h into hyperv.h.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02 15:30:47 -08:00
Greg Kroah-Hartman da0e96315c hv: rename prep_negotiate_resp() to vmbus_prep_negotiate_resp()
It's a global symbol, so properly prefix it and use the proper EXPORT
value as well.

Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-11 08:49:19 -06:00
Greg Kroah-Hartman 46a9719136 Staging: hv: move hyperv code out of staging directory
After many years wandering the desert, it is finally time for the
Microsoft HyperV code to move out of the staging directory.  Or at least
the core hyperv bus code, and the utility driver, the rest still have
some review to get through by the various subsystem maintainers.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
2011-10-10 22:52:55 -06:00