dma-pool's dev_to_pool() creates the false impression that there is a
way to grantee a mapping between a device's DMA constraints and an
atomic pool. It tuns out it's just a guess, and the device might need to
use an atomic pool containing memory from a 'safer' (or lower) memory
zone.
To help mitigate this, introduce dma_guess_pool() which can be fed a
device's DMA constraints and atomic pools already known to be faulty, in
order for it to provide an better guess on which pool to use.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The function is only used once and can be simplified to a one-liner.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
dma_coherent_ok() checks if a physical memory area fits a device's DMA
constraints.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
fuse_writepages() ignores some errors taken from fuse_writepages_fill() I
believe it is a bug: if .writepages is called with WB_SYNC_ALL it should
either guarantee that all data was successfully saved or return error.
Fixes: 26d614df1d ("fuse: Implement writepages callback")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_writepages_fill uses following construction:
if (wpa && ap->num_pages &&
(A || B || C)) {
action;
} else if (wpa && D) {
if (E) {
the same action;
}
}
- ap->num_pages check is always true and can be removed
- "if" and "else if" calls the same action and can be merged.
Move checking A, B, C, D, E conditions to a helper, add comments.
Original-patch-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Previous patch changed handling of remount/reconfigure to ignore all
options, including those that are unknown to the fuse kernel fs. This was
done for backward compatibility, but this likely only affects the old
mount(2) API.
The new fsconfig(2) based reconfiguration could possibly be improved. This
would make the new API less of a drop in replacement for the old, OTOH this
is a good chance to get rid of some weirdnesses in the old API.
Several other behaviors might make sense:
1) unknown options are rejected, known options are ignored
2) unknown options are rejected, known options are rejected if the value
is changed, allowed otherwise
3) all options are rejected
Prior to the backward compatibility fix to ignore all options all known
options were accepted (1), even if they change the value of a mount
parameter; fuse_reconfigure() does not look at the config values set by
fuse_parse_param().
To fix that we'd need to verify that the value provided is the same as set
in the initial configuration (2). The major drawback is that this is much
more complex than just rejecting all attempts at changing options (3);
i.e. all options signify initial configuration values and don't make sense
on reconfigure.
This patch opts for (3) with the rationale that no mount options are
reconfigurable in fuse.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The command
mount -o remount -o unknownoption /mnt/fuse
succeeds on kernel versions prior to v5.4 and fails on kernel version at or
after. This is because fuse_parse_param() rejects any unrecognised options
in case of FS_CONTEXT_FOR_RECONFIGURE, just as for FS_CONTEXT_FOR_MOUNT.
This causes a regression in case the fuse filesystem is in fstab, since
remount sends all options found there to the kernel; even ones that are
meant for the initial mount and are consumed by the userspace fuse server.
Fix this by ignoring mount options, just as fuse_remount_fs() did prior to
the conversion to the new API.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Fixes: c30da2e981 ("fuse: convert to use the new mount API")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
s_op->remount_fs() is only called from legacy_reconfigure(), which is not
used after being converted to the new API.
Convert to using ->reconfigure(). This restores the previous behavior of
syncing the filesystem and rejecting MS_MANDLOCK on remount.
Fixes: c30da2e981 ("fuse: convert to use the new mount API")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_writepages_fill() calls tree_insert() with ap->num_pages = 0 which
triggers the following warning:
WARNING: CPU: 1 PID: 17211 at fs/fuse/file.c:1728 tree_insert+0xab/0xc0 [fuse]
RIP: 0010:tree_insert+0xab/0xc0 [fuse]
Call Trace:
fuse_writepages_fill+0x5da/0x6a0 [fuse]
write_cache_pages+0x171/0x470
fuse_writepages+0x8a/0x100 [fuse]
do_writepages+0x43/0xe0
Fix up the warning and clean up the code around rb-tree insertion:
- Rename tree_insert() to fuse_insert_writeback() and make it return the
conflicting entry in case of failure
- Re-add tree_insert() as a wrapper around fuse_insert_writeback()
- Rename fuse_writepage_in_flight() to fuse_writepage_add() and reverse
the meaning of the return value to mean
+ "true" in case the writepage entry was successfully added
+ "false" in case it was in-fligt queued on an existing writepage
entry's auxiliary list or the existing writepage entry's temporary
page updated
Switch from fuse_find_writeback() + tree_insert() to
fuse_insert_writeback()
- Move setting orig_pages to before inserting/updating the entry; this may
result in the orig_pages value being discarded later in case of an
in-flight request
- In case of a new writepage entry use fuse_writepage_add()
unconditionally, only set data->wpa if the entry was added.
Fixes: 6b2fb79963 ("fuse: optimize writepages search")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Original-path-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In fuse_writepage_end() the old writepages entry needs to be removed from
the rbtree before inserting the new one, otherwise tree_insert() would
fail. This is a very rare codepath and no reproducer exists.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Early secure guest boot hits the below crash while booting with
vcpus numbers aligned with page boundary for PAGE size of 64k
and LPPACA size of 1k i.e 64, 128 etc.
Partition configured for 64 cpus.
CPU maps initialized for 1 thread per core
------------[ cut here ]------------
kernel BUG at arch/powerpc/kernel/paca.c:89!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
This is due to the BUG_ON() for shared_lppaca_total_size equal to
shared_lppaca_size. Instead the code should only BUG_ON() if we have
exceeded the total_size, which indicates we've overflowed the array.
Fixes: bd104e6db6 ("powerpc/pseries/svm: Use shared memory for LPPACA structures")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Reword change log to clarify we're fixing not removing the check]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200619070113.16696-1-sathnaga@linux.vnet.ibm.com
The assignment of metadata overwrote the new display resolution values,
hence we'd miss the size actually changed and wouldn't redefine the
surface. This would then lead to command buffer error when trying to
update the screen target (due to the size mismatch), and result in a
VM with black screen.
Fixes: 504901dbb0 ("drm/vmwgfx: Refactor surface_define to use vmw_surface_metadata")
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Cc: stable@vger.kernel.org
Pull input fixes from Dmitry Torokhov:
"A few quirks for the Elan touchpad driver, another Thinkpad is being
switched over from PS/2 to native RMI4 interface, and we gave a brand
new SW_MACHINE_COVER switch definition"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - add more hardware ID for Lenovo laptops
Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list
Revert "Input: elants_i2c - report resolution information for touch major"
Input: elan_i2c - only increment wakeup count on touch
Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen
ARM: dts: n900: remove mmc1 card detect gpio
Input: add `SW_MACHINE_COVER`
Including:
- Fix for a use-after-free of the device iommu-group. Found in the
arm-smmu driver, but the fix is in generic code.
- Fix for the new Allwinner IOMMU driver to use the atomic
readl_timeout() variant in IO/TLB flushing code.
- A couple of cleanups to fix various compile warnings.
-----BEGIN PGP SIGNATURE-----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=M7Kn
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix a use-after-free of the device iommu-group. Found in the arm-smmu
driver, but the fix is in generic code.
- Fix for the new Allwinner IOMMU driver to use the atomic
readl_timeout() variant in IO/TLB flushing code.
- A couple of cleanups to fix various compile warnings.
* tag 'iommu-fixes-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Mark qcom_smmu_client_of_match as possibly unused
iommu: Fix use-after-free in iommu_release_device
iommu/amd: Make amd_iommu_apply_ivrs_quirks() static inline
iommu: SUN50I_IOMMU should depend on HAS_DMA
iommu/sun50i: Remove unused variable
iommu/sun50i: Change the readl timeout to the atomic variant
Naresh Kamboju reported that the LTP tests can cause warnings on i386
going back all the way to v5.0, and bisected it to commit 2c91bd4a4e
("mm: speed up mremap by 20x on large regions").
The warning in move_normal_pmd() is actually mostly correct, but we have
a very unusual special case at process creation time, when we may move
the stack down with an overlapping mode (kind of like a "memmove()"
except using the page tables).
And when you have just the right condition of "move a large initial
stack by the right alignment in the end, but with the early part of the
move being only page-aligned", we'll be in a situation where we're
trying to move a normal PMD entry on top of an already existing - but
now empty - PMD entry.
The warning is still worth having, in case it ever triggers other cases,
and perhaps as a reminder that we could do the stack move case more
efficiently (although it's clearly rare enough that it probably doesn't
matter).
But make it do WARN_ON_ONCE(), so that you can't flood the logs with it.
And add a *big* comment above it to explain and remind us what's going
on, because it took some figuring out to see how this could trigger.
Kudos to Joel Fernandes for debugging this.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Debugged-and-acked-by: Joel Fernandes <joel@joelfernandes.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If intel_pstate starts in the passive mode by default (that happens
when the processor in the system doesn't support HWP), passing
intel_pstate=active in the kernel command line doesn't work, so
fix that.
Fixes: 33aa46f252 ("cpufreq: intel_pstate: Use passive mode by default without HWP")
Reported-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Doug Smythies <dsmythies@telus.net>
We used to do this before 3453d5708b, but this was changed to better
handle the NFS4ERR_SEQ_MISORDERED error code. This commit fixed the slot
re-use case when the server doesn't receive the interrupted operation,
but if the server does receive the operation then it could still end up
replying to the client with mis-matched operations from the reply cache.
We can fix this by sending a SEQUENCE to the server while recovering from
a SEQ_MISORDERED error when we detect that we are in an interrupted slot
situation.
Fixes: 3453d5708b (NFSv4.1: Avoid false retries when RPC calls are interrupted)
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that the connect worker is awoken if an attempt to establish
a connection is unsuccessful. Otherwise the worker waits forever
and the transport workload hangs.
Connect errors should not attempt to destroy the ep, since the
connect worker continues to use it after the handler runs, so these
errors are now handled independently of DISCONNECTED events.
Reported-by: Dan Aloni <dan@kernelim.com>
Fixes: e28ce90083 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I noticed that when rpcrdma_xprt_connect() returns -ENOMEM,
instead of retrying the connect, the RPC client kills the
RPC task that requested the connection. We want a retry
here.
Fixes: cb586decbb ("xprtrdma: Make sendctx queue lifetime the same as connection lifetime")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Both Dan and I have observed two processes invoking
rpcrdma_xprt_disconnect() concurrently. In my case:
1. The connect worker invokes rpcrdma_xprt_disconnect(), which
drains the QP and waits for the final completion
2. This causes the newly posted Receive to flush and invoke
xprt_force_disconnect()
3. xprt_force_disconnect() sets CLOSE_WAIT and wakes up the RPC task
that is holding the transport lock
4. The RPC task invokes xprt_connect(), which calls ->ops->close
5. xprt_rdma_close() invokes rpcrdma_xprt_disconnect(), which tries
to destroy the QP.
Deadlock.
To prevent xprt_force_disconnect() from waking anything, handle the
clean up after a failed connection attempt in the xprt's sndtask.
The retry loop is removed from rpcrdma_xprt_connect() to ensure
that the newly allocated ep and id are properly released before
a REJECTED connection attempt can be retried.
Reported-by: Dan Aloni <dan@kernelim.com>
Fixes: e28ce90083 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In the error paths, there's no need to call kfree(ep) after calling
rpcrdma_ep_put(ep).
Fixes: e28ce90083 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
All users of this helper have been updated to not use it.
Remove it now, so that we don't need to move it when creating the
iio_dev_opaque structure.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> #for Matt's drivers
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200713091305.32708-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Assign array_size() to variable _size_ and use it in multiple places.
This issue was found with the help of Coccinelle and, audited and fixed
manually.
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200710183350.GA8376@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 82046702e2 ("efi/libstub/arm64: Replace 'preferred' offset
with alignment check"), loading a relocatable arm64 kernel at a physical
address which is not 2MB aligned and subsequently booting with EFI will
leave the Image in-place, relying on the kernel to relocate itself early
during boot. In conjunction with commit dd4bc60765 ("arm64: warn on
incorrect placement of the kernel by the bootloader"), which enables
CONFIG_RELOCATABLE by default, this effectively means that entering an
arm64 kernel loaded at an alignment smaller than 2MB with EFI (e.g. using
QEMU) will result in silent relocation at runtime.
Unfortunately, this has a subtle but confusing affect for developers
trying to inspect the PC value during a crash and comparing it to the
symbol addresses in vmlinux using tools such as 'nm' or 'addr2line';
all text addresses will be displaced by a sub-2MB offset, resulting in
the wrong symbol being identified in many cases. Passing "nokaslr" on
the command line or disabling "CONFIG_RANDOMIZE_BASE" does not help,
since the EFI stub only copies the kernel Image to a 2MB boundary if it
is not relocatable.
Adjust the EFI stub for arm64 so that the minimum Image alignment is 2MB
unless KASLR is in use.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: David Brazdil <dbrazdil@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
config option PCIE_RCAR internally selects PCIE_RCAR_HOST which builds
the same driver. So this patch renames CONFIG_PCIE_RCAR to
CONFIG_PCIE_RCAR_HOST so that PCIE_RCAR can be safely dropped from
Kconfig file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1589494238-2933-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
fsl,ls1021a is a mach under arch/arm/mach-imx/, however it could
not use the soc driver which will break caam on ls1021a platform.
So directly return if it is compatible with fsl,ls1021a.
Fixes: 52102a3ba6 ("soc: imx: move cpu code to drivers/soc/imx")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Acer TravelMate B311R-31 laptop's audio (1025:1430) with ALC256
cannot detect the headset microphone until
ALC256_FIXUP_ACER_MIC_NO_PRESENCE quirk maps the NID 0x19 as the headset
mic pin.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200713060421.62435-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
No callers of imx_add_imx_dma() need an error IRQ, so they supply 0 as
"irq_err", which means we register a resource of IRQ 0, which is invalid
and causes a warning if used.
Remove the "irq_err" argument altogether so there's no chance of trying to
use the invalid IRQ 0.
Fixes: a85a6c86c2 ("driver core: platform: Clarify that IRQ 0 is invalid")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: kernel@pengutronix.de
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit a85a6c86c2 ("driver core: platform: Clarify that IRQ 0 is
invalid"), the kernel is a bit touchy when it encounters interrupt 0.
As a result, there are lots of warnings such as the following when booting
systems such as 'kzm'.
WARNING: CPU: 0 PID: 1 at drivers/base/platform.c:224 platform_get_irq_optional+0x118/0x128
0 is an invalid IRQ number
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3 #1
Hardware name: Kyoto Microcomputer Co., Ltd. KZM-ARM11-01
[<c01127d4>] (unwind_backtrace) from [<c010c620>] (show_stack+0x10/0x14)
[<c010c620>] (show_stack) from [<c06f5f54>] (dump_stack+0xe8/0x120)
[<c06f5f54>] (dump_stack) from [<c0128878>] (__warn+0xe4/0x108)
[<c0128878>] (__warn) from [<c0128910>] (warn_slowpath_fmt+0x74/0xbc)
[<c0128910>] (warn_slowpath_fmt) from [<c08b8e84>] (platform_get_irq_optional+0x118/0x128)
[<c08b8e84>] (platform_get_irq_optional) from [<c08b8eb4>] (platform_irq_count+0x20/0x3c)
[<c08b8eb4>] (platform_irq_count) from [<c0728660>] (mxc_gpio_probe+0x8c/0x494)
[<c0728660>] (mxc_gpio_probe) from [<c08b93cc>] (platform_drv_probe+0x48/0x98)
[<c08b93cc>] (platform_drv_probe) from [<c08b703c>] (really_probe+0x214/0x344)
[<c08b703c>] (really_probe) from [<c08b7274>] (driver_probe_device+0x58/0xb4)
[<c08b7274>] (driver_probe_device) from [<c08b7478>] (device_driver_attach+0x58/0x60)
[<c08b7478>] (device_driver_attach) from [<c08b7504>] (__driver_attach+0x84/0xc0)
[<c08b7504>] (__driver_attach) from [<c08b50f8>] (bus_for_each_dev+0x78/0xb8)
[<c08b50f8>] (bus_for_each_dev) from [<c08b62cc>] (bus_add_driver+0x154/0x1e0)
[<c08b62cc>] (bus_add_driver) from [<c08b82b8>] (driver_register+0x74/0x108)
[<c08b82b8>] (driver_register) from [<c0102320>] (do_one_initcall+0x80/0x3b4)
[<c0102320>] (do_one_initcall) from [<c1501008>] (kernel_init_freeable+0x170/0x208)
[<c1501008>] (kernel_init_freeable) from [<c0e178d4>] (kernel_init+0x8/0x11c)
[<c0e178d4>] (kernel_init) from [<c0100134>] (ret_from_fork+0x14/0x20)
As it turns out, mxc_register_gpio() is a bit lax when setting the
number of resources: it registers a resource with interrupt 0 when in
reality there is no such interrupt. Fix the problem by not declaring
the second interrupt resource if there is no second interrupt.
Fixes: a85a6c86c2 ("driver core: platform: Clarify that IRQ 0 is invalid")
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- fix __sync_fetch_and_{and,or}_4 declarations to avoid build warning
- update *pos in cpuinfo_op.next to avoid runtime warning
- use for_each_set_bit in xtensa_pmu_irq_handler instead of open-coding
it
-----BEGIN PGP SIGNATURE-----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=TseR
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20200712' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
- fix __sync_fetch_and_{and,or}_4 declarations to avoid build warning
- update *pos in cpuinfo_op.next to avoid runtime warning
- use for_each_set_bit in xtensa_pmu_irq_handler instead of open-coding
it
* tag 'xtensa-20200712' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: simplify xtensa_pmu_irq_handler
xtensa: update *pos in cpuinfo_op.next
xtensa: fix __sync_fetch_and_{and,or}_4 declarations
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl8K3ugACgkQxWXV+ddt
WDsDNBAAn5iaMNwlCBYpwAaWlltMog3SKg+vgpEcFD9qLlmimW/1TlrjjGRzp6Mn
nnNp+YjYDotqU9pP1OwESpY1LTzuVQlQL1yaiPLrehw/WsZgjdDWBk/EyU0n1vz1
Sr5wcyCVyVZZyO2/BEVTDhkvu+sj9Rcwo2QCsC2aIOTVSfQGFSklMp2VNdu2YQBy
zyTOhbwpn3OPPZsvScEujvSY9oUAN3J8WYA9jmgtwjZD7sr6UNyNI9vy8woi0VAQ
Uo7nXc43ZcS1xTwziGOpC6fZi90zrF7ZvfFT0qY92EEDcAQcCzPDl6f4OnAjr6/b
rnZcLvusEcENjFQn3pD7fCuXiIRrN8eHspj5+K/oRBTXWC5AykBwsLWt7M+tTMYa
ljEBRZlQlHMlC3xSEZNDccEvScXrEIu3Q2WrTOTXSgXi4e3q89VUTEIjAhfnTTzJ
VwHhGZIB6o+V7wZ0EhWdt9b1/Ro/AcADddV+AxTsfC1YCHVZOsSSa3DxV243ORsA
/U3t2a4SMp/iSHTtoLIwbr/O1Uj9UaOk2n1DcNbGIgdn14yYt6YWOhvrOPBampEa
zfBzmAOx9r5Mf2wWD0iTm4gJEZsrB+IpboYZ6cuBcOI29+A4k0POBfRLXgf8/jMo
5kBWm+C3KKkZO8u/Z4gtVG1ZFdxsnYAc+q+UXS5ZSJMH+++UoZQ=
=hTok
-----END PGP SIGNATURE-----
Merge tag 'for-5.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two refcounting fixes and one prepartory patch for upcoming splice
cleanup:
- fix double put of block group with nodatacow
- fix missing block group put when remounting with discard=async
- explicitly set splice callback (no functional change), to ease
integrating splice cleanup patches"
* tag 'for-5.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: wire up iter_file_splice_write
btrfs: fix double put of block group with nocow
btrfs: discard: add missing put when grabbing block group from unused list
59960b9deb ("io_uring: fix lazy work init") tried to fix missing
io_req_init_async(), but left out work.flags and hash. Do it earlier.
Fixes: 7cdaf587de ("io_uring: avoid whole io_wq_work copy for requests completed inline")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure to set msg.msg_name for the async portion of send/recvmsg,
as the header copy will copy to/from it.
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the textual documentation of Device Tree bindings for the
Ingenic JZ47xx SoCs ADC controller to YAML.
The `interrupts` property is now explicitly listed and marked as
required. While missing from the previous textual documentation, this
property has been used with all the boards which probe this driver.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Report to user space that 10Hz is the sampling frequency of
the accelerometers in legacy mode, and it can not be changed.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Eugen is, now, more active and up to date on this topic than I. So I let
him the full maintainance of this driver.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Nicolas Saenz Julienne
Vasily Averin
Miklos Szeredi
Satheesh Rajendran
Roland Scheidegger
Linus Torvalds
Rafael J. Wysocki
Anna Schumaker
Chuck Lever
Alexandru Ardelean
Alexander A. Klimov
Suraj Upadhyay
Gustavo A. R. Silva
Will Deacon
Lad Prabhakar
Peng Fan
Jian-Hong Pan
Aneesh Kumar K.V
Bjorn Helgaas
Guenter Roeck
Pavel Begunkov
Artur Rojek
Gwendal Grignou
Ludovic Desroches