Граф коммитов

24 Коммитов

Автор SHA1 Сообщение Дата
Lukasz Majewski bf4a0bed36 ARM: dts: Adding CPU cooling binding for Exynos SoCs
Presented patch aims to move data necessary for correct CPU cooling device
configuration from exynos_tmu_data.c to device tree.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:22:56 +09:00
Lukasz Majewski 907c10fcc5 ARM: dts: Enable TMU for exynos4210-trats
The thermal IP block (Thermal Management Unit) called TMU has been
enabled in this device.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27 05:22:55 +09:00
Linus Torvalds a233bb742a ARM: SoC DT updates
DT changes continue to be the bulk of our merge window contents.
 
 We continue to have a large set of changes across the board as new platforms
 and drivers are added.
 
 Some of the new platforms are:
 - Alphascale ASM9260
 - Marvell Armada 388
 - CSR Atlas7
 - TI Davinci DM816x
 - Hisilicon HiP01
 - ST STiH418
 
 There have also been some sweeping changes, including relicensing of DTS
 contents from GPL to GPLv2+/X11 so that the same files can be reused in
 other non-GPL projects more easily. There's also been changes to the
 DT Makefile to make it a little less conflict-ridden and churny down
 the road.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4u0bAAoJEIwa5zzehBx3XFQP+wbVDp39ay3SRanFWeXqhfTe
 6jRsYrOcq6BN/b1NugjD+yKIYp2MQhwlXbMmj/1vnmJ3XSY25ZMLlgs0/vsNk7W2
 5e0xySwdhd1DjsajhZyN+5gUgqcTgOof/V+CbEUkijDDJ9v/WJbGZrpCHDz+UVTh
 dG9p1vrKoxDELAVbnp9muKZPlaQkAM60zJcHNJw9bJB5M0RCx4XFwPZc1cDLIsIZ
 lK/uYpKsgvgrGw5QuCtEK1/NkqLkBqgBfVg6xq0VB6OCYetqpxqs7kSZjnncIhQc
 PvxShsIJzb/dgfk7xBVb1+4Jfe5L/4poFwS69QuBlr/wiwc7wrhv37edgkyDlclS
 aj5xfOIhQdDaTkknFVs4QEkGAFg/lnTZnmiNiQdlsmDHqbWdTEELKShdVeMO7Zsg
 6bPdDipA2jsQ86UWNwucis8QulzVTuyNuU+Mlrxp73b76+hKXLkbYcZ51FJ/xMD8
 wLpCGqtc9Quirdb7Wy7XiVfesv3lKfDmzZB/6ZJ6zfadDvsqJPxAjNTA8VYZ9YeT
 EyW4K6CMOa5v+sLmIQUsAjKCYaul3PVDCi4voQjpS1ZtPLw+WN3zqX5XZZDT9Ll2
 D1ycmInp/40KsQgjV36u1NlIKMM+oaUJaSzaSPGdgj3Zcw0YZi8O+h0m6iHrlzUB
 uGFufsLKmcOFY/sLwprt
 =XEw1
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT changes continue to be the bulk of our merge window contents.

  We continue to have a large set of changes across the board as new
  platforms and drivers are added.

  Some of the new platforms are:
   - Alphascale ASM9260
   - Marvell Armada 388
   - CSR Atlas7
   - TI Davinci DM816x
   - Hisilicon HiP01
   - ST STiH418

  There have also been some sweeping changes, including relicensing of
  DTS contents from GPL to GPLv2+/X11 so that the same files can be
  reused in other non-GPL projects more easily.  There's also been
  changes to the DT Makefile to make it a little less conflict-ridden
  and churny down the road"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits)
  ARM: dts: Add PPMU node for exynos4412-trats2
  ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
  ARM: dts: Add PPMU dt node for exynos4 and exynos4210
  ARM: dts: Add PPMU dt node for exynos3250
  ARM: dts: add mipi dsi device node for exynos4415
  ARM: dts: add fimd device node for exynos4415
  ARM: dts: Add syscon phandle to the video-phy node for Exynos4
  ARM: dts: Add sound nodes for exynos4412-trats2
  ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
  ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
  ARM: dts: Add max77693 charger node for exynos4412-trats2
  ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
  ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
  ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2
  ARM: dts: am57xx-beagle-x15: Fix USB2 mode
  ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
  ARM: dts: dra72-evm: Add extcon nodes for USB
  ARM: dts: dra7-evm: Add extcon nodes for USB
  ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
  ...
2015-02-17 09:36:52 -08:00
Tomasz Figa 62d38099bf ARM: dts: exynos4: Add stdout-path properties
This patch adds stdout-path property to chosen nodes of Exynos4 boards
to enable use of earlycon feature without the need to hardcode port
number in kernel itself.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02 10:11:26 -08:00
Marek Szyprowski 32f144f28e ARM: dts: add 'dr_mode' property to hsotg devices for exynos boards
All currently supported boards use hsotg/dwc2 controller in device
('peripheral') mode, so add property which sets correct operation mode.
This patch fixes support in recent changes in dwc2 driver, which added
support for dual-role devices.

Suggested-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 13:24:06 +09:00
Sylwester Nawrocki 0357a4438d ARM: dts: Specify default clocks for Exynos4 camera devices
Specify the default mux and divider clocks in device tree
to ensure the FIMC devices on Trats, Trats2, Universal_c210
and Odroid X2/U3 boards are clocked from recommended clock
source and with maximum supported frequency.
For Trats2 also the MIPI-CSIS and the camera sensor clocks
are configured, the 'clock-frequency' property is deprecated
in favour of 'assigned-clock-rates' property.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-22 23:13:03 +09:00
Tomasz Figa 3fcf858ac5 ARM: dts: Enable USB gadget functionality for exynos4210-trats
This patch adds device tree nodes necessary to enable USB
gadget functionality on Exynos4210-based Trats board.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-05-23 02:34:11 +09:00
Linus Torvalds e9f37d3a8d Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "Highlights:

   - drm:

     Generic display port aux features, primary plane support, drm
     master management fixes, logging cleanups, enforced locking checks
     (instead of docs), documentation improvements, minor number
     handling cleanup, pseudofs for shared inodes.

   - ttm:

     add ability to allocate from both ends

   - i915:

     broadwell features, power domain and runtime pm, per-process
     address space infrastructure (not enabled)

   - msm:

     power management, hdmi audio support

   - nouveau:

     ongoing GPU fault recovery, initial maxwell support, random fixes

   - exynos:

     refactored driver to clean up a lot of abstraction, DP support
     moved into drm, LVDS bridge support added, parallel panel support

   - gma500:

     SGX MMU support, SGX irq handling, asle irq work fixes

   - radeon:

     video engine bringup, ring handling fixes, use dp aux helpers

   - vmwgfx:

     add rendernode support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits)
  DRM: armada: fix corruption while loading cursors
  drm/dp_helper: don't return EPROTO for defers (v2)
  drm/bridge: export ptn3460_init function
  drm/exynos: remove MODULE_DEVICE_TABLE definitions
  ARM: dts: exynos4412-trats2: enable exynos/fimd node
  ARM: dts: exynos4210-trats: enable exynos/fimd node
  ARM: dts: exynos4412-trats2: add panel node
  ARM: dts: exynos4210-trats: add panel node
  ARM: dts: exynos4: add MIPI DSI Master node
  drm/panel: add S6E8AA0 driver
  ARM: dts: exynos4210-universal_c210: add proper panel node
  drm/panel: add ld9040 driver
  panel/ld9040: add DT bindings
  panel/s6e8aa0: add DT bindings
  drm/exynos: add DSIM driver
  exynos/dsim: add DT bindings
  drm/exynos: disallow fbdev initialization if no device is connected
  drm/mipi_dsi: create dsi devices only for nodes with reg property
  drm/mipi_dsi: add flags to DSI messages
  Skip intel_crt_init for Dell XPS 8700
  ...
2014-04-08 09:52:16 -07:00
Andrzej Hajda b56083968f ARM: dts: exynos4210-trats: enable exynos/fimd node
The patch changes fimd node status to OK.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-04-04 21:24:49 +09:00
Andrzej Hajda e78dd468d0 ARM: dts: exynos4210-trats: add panel node
The patch adds s6e8aa0 panel node for trats.
It adds also trats specific properties for DSI.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-04-04 21:24:49 +09:00
Sachin Kamat 8bdb31b4d1 ARM: dts: Update Exynos DT files with generic compatible strings
Add generic compatible strings to the respective board DT files.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-03-21 02:17:22 +09:00
Tomasz Figa db9f31696a ARM: dts: Work around lack of cpufreq regulator lookup for exynos4210-origen and trats boards
Exynos cpufreq drivers does not support device tree based regulator
lookup, so it can get the VDD ARM regulator only by its name. To get
cpufreq working for now, this patch works this around by renaming the
regulator in board dts files to vdd_arm, which is the name expected by
the driver.

This fixes a regression introduced by dropping support of board file
based bootup of Exynos 4210 boards that rendered cpufreq inoperable on
Trats and Origen boards.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-10-16 07:25:40 +09:00
Andrzej Hajda b75e2e3d28 ARM: dts: Add S5K5BA sensor regulator definitions for Trats board
Add MAX8998 LDO12 and fixed voltage regulator nodes. While at it,
all fixed voltage regulator nodes are grouped in a 'regulators' node.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-07 01:08:25 +09:00
Sylwester Nawrocki 39a11311a7 ARM: dts: Add FIMC nodes for Exynos4210 Trats board
Enable FIMC devices on the Trats board. This allows using the
device in memory-to-memory mode only. The camera port pinctrl
property is now empty and will be updated while support for the
camera sensors is added.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-07 01:08:23 +09:00
Padmavathi Venna 3799279f70 ARM: dts: use #include for all device trees for Samsung
Replace /include/ (dtc) with #include (C pre-processor) for all
Samsung DT files

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19 03:28:40 +09:00
Thomas Abraham 8b6076d47f ARM: dts: add board specific fixed rate clock nodes for Exynos based platforms
The clock frequency of xxti and xusbxti clocks is dependent on the
frequency of the on-board oscillator that is used to generate these
clocks. So allow the frequency of these clocks to be specfied from
device tree.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-25 18:18:32 +09:00
Tomasz Figa d36bb0f040 ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats
The broken voltage property has been replaced with auto detection based
on voltages available on vmmc voltage regulator, so there is no use for
it now.

This patch removes the now unused property from Trats Device Tree
sources.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-20 20:17:20 +09:00
Tomasz Figa 0d09bf69fc ARM: dts: Add node for touchscreen for exynos4210-trats
This patch adds a device tree node for the Melfas MMS114-controlled
touchscreen present on Samsung Trats board.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-20 16:26:18 +09:00
Tomasz Figa 50528aa147 ARM: dts: Add node for touchscreen voltage regulator for exynos4210-trats
This patch adds device tree node for a fixed voltage regulator used for
touchscreen on Samsung Trats board.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-20 16:26:18 +09:00
Tomasz Figa b74cbbc7b6 ARM: dts: Add node for i2c3 bus for exynos4210-trats
This patch adds device tree node for i2c3 bus to device tree source
of Samsung Trats board. This bus is used by mms114 touchscreen
controller, for which support will be added in separate patch.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-20 16:26:17 +09:00
Tomasz Figa 9eb61020a0 ARM: dts: Add nodes for GPIO keys available on Trats
This patch extends dts file of Samsung Trats board to add support for
available GPIO keys using gpio-keys driver.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-20 16:26:17 +09:00
Tomasz Figa e92501263c ARM: dts: Update for pinctrl-samsung driver for exynos4210-trats
This patch updates all parts of Trats dts related to pin configuration
to use new GPIO and pinctrl bindings, instead of (now unsupported on
Exynos4) legacy gpio-samsung bindings.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-20 16:26:17 +09:00
Tomasz Figa 59cf19a4fa ARM: dts: Split memory into 4 sections for exynos4210-trats
Since the maximum section size on mach-exynos is set to 256MiB, boards
with memory configuration defined using sections bigger than 256MiB will
fail to boot with a kernel panic.

This patch modifies the dts file of Samsung Trats board to define four
sections of 256MiB instead of two of 512MiB to fix the boot problem.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-10-17 18:10:34 +09:00
Tomasz Figa d105f0b121 ARM: dts: Add basic dts file for Samsung Trats board
This commit adds basic device tree for Exynos4210-based Trats board.
Currently it provides support for eMMC over sdhci and MAX8997 PMIC.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21 10:50:27 +09:00