Remove EnterFunction and LeaveFunction.
These debugging macros seem well past their use-by date. And seem to
have little value these days. Removing them allows some trivial cleanup
of some exit paths for some functions. These are also included in this
patch. There is likely scope for further cleanup of both debugging and
unwind paths. But let's leave that for another day.
Only intended to change debug output, and only when CONFIG_IP_VS_DEBUG
is enabled. Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Consistently use array_size() to calculate the size of ip_vs_conn_tab
in bytes.
Flagged by Coccinelle:
WARNING: array_size is already used (line 1498) to compute the same size
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In ip_vs_sync_conn_v0() copy is made to struct ip_vs_sync_conn_options.
That structure looks like this:
struct ip_vs_sync_conn_options {
struct ip_vs_seq in_seq;
struct ip_vs_seq out_seq;
};
The source of the copy is the in_seq field of struct ip_vs_conn. Whose
type is struct ip_vs_seq. Thus we can see that the source - is not as
wide as the amount of data copied, which is the width of struct
ip_vs_sync_conn_option.
The copy is safe because the next field in is another struct ip_vs_seq.
Make use of struct_group() to annotate this.
Flagged by gcc-13 as:
In file included from ./include/linux/string.h:254,
from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/timex.h:5,
from ./include/linux/timex.h:67,
from ./include/linux/time32.h:13,
from ./include/linux/time.h:60,
from ./include/linux/stat.h:19,
from ./include/linux/module.h:13,
from net/netfilter/ipvs/ip_vs_sync.c:38:
In function 'fortify_memcpy_chk',
inlined from 'ip_vs_sync_conn_v0' at net/netfilter/ipvs/ip_vs_sync.c:606:3:
./include/linux/fortify-string.h:529:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
529 | __read_overflow2_field(q_size_field, size);
|
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
pass it as argument instead. This reduces size of traceinfo to
16 bytes. Total stack usage:
nf_tables_core.c:252 nft_do_chain 304 static
While its possible to also pass basechain as argument, doing so
increases nft_do_chaininfo function size.
Unlike pktinfo/verdict/rule the basechain info isn't used in
the expression evaluation path. gcc places it on the stack, which
results in extra push/pop when it gets passed to the trace helpers
as argument rather than as part of the traceinfo structure.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Just pass it as argument to nft_trace_notify. Stack is reduced by 8 bytes:
nf_tables_core.c:256 nft_do_chain 312 static
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
pass it as argument. No change in object size.
stack usage decreases by 8 byte:
nf_tables_core.c:254 nft_do_chain 320 static
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This helper is inlined, so keep it as small as possible.
If the static key is true, there is only a very small chance
that info->trace is false:
1. tracing was enabled at this very moment, the static key was
updated to active right after nft_do_table was called.
2. tracing was disabled at this very moment.
trace->info is already false, the static key is about to
be patched to false soon.
In both cases, no event will be sent because info->trace
is false (checked in noinline slowpath). info->nf_trace is irrelevant.
The nf_trace update is redunant in this case, but this will only
happen for short duration, when static key flips.
text data bss dec hex filename
old: 2980 192 32 3204 c84 nf_tables_core.o
new: 2964 192 32 3188 c74i nf_tables_core.o
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We only need to validate tables that saw changes in the current
transaction.
The existing code revalidates all tables, but this isn't needed as
cross-table jumps are not allowed (chains have table scope).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ->cleanup callback needs to be removed, this doesn't work anymore as
the transaction mutex is already released in the ->abort function.
Just do it after a successful validation pass, this either happens
from commit or abort phases where transaction mutex is held.
Fixes: f102d66b33 ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Now that the rule trailer/end marker and the rcu head reside in the
same structure, we no longer need to save/restore the chain pointer
when performing/returning from a jump.
We can simply let the trace infra walk the evaluated rule until it
hits the end marker and then fetch the chain pointer from there.
When the rule is NULL (policy tracing), then chain and basechain
pointers were already identical, so just use the basechain.
This cuts size of jumpstack in half, from 256 to 128 bytes in 64bit,
scripts/stackusage says:
nf_tables_core.c:251 nft_do_chain 328 static
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Walk the rule headers until the trailer one (last_bit flag set) instead
of stopping at last_rule address.
This avoids the need to store the address when jumping to another chain.
This cuts size of jumpstack array by one third, on 64bit from
384 to 256 bytes. Still, stack usage is still quite large:
scripts/stackusage:
nf_tables_core.c:258 nft_do_chain 496 static
Next patch will also remove chain pointer.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In order to free the rules in a chain via call_rcu, the rule array used
to stash a rcu_head and space for a pointer at the end of the rule array.
When the current nft_rule_dp blob format got added in
2c865a8a28 ("netfilter: nf_tables: add rule blob layout"), this results
in a double-trailer:
size (unsigned long)
struct nft_rule_dp
struct nft_expr
...
struct nft_rule_dp
struct nft_expr
...
struct nft_rule_dp (is_last=1) // Trailer
The trailer, struct nft_rule_dp (is_last=1), is not accounted for in size,
so it can be located via start_addr + size.
Because the rcu_head is stored after 'start+size' as well this means the
is_last trailer is *aliased* to the rcu_head (struct nft_rules_old).
This is harmless, because at this time the nft_do_chain function never
evaluates/accesses the trailer, it only checks the address boundary:
for (; rule < last_rule; rule = nft_rule_next(rule)) {
...
But this way the last_rule address has to be stashed in the jump
structure to restore it after returning from a chain.
nft_do_chain stack usage has become way too big, so put it on a diet.
Without this patch is impossible to use
for (; !rule->is_last; rule = nft_rule_next(rule)) {
... because on free, the needed update of the rcu_head will clobber the
nft_rule_dp is_last bit.
Furthermore, also stash the chain pointer in the trailer, this allows
to recover the original chain structure from nf_tables_trace infra
without a need to place them in the jump struct.
After this patch it is trivial to diet the jump stack structure,
done in the next two patches.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
add glue code so a bpf program can be run using userspace-provided
netfilter state and packet/skb.
Default is to use ipv4:output hook point, but this can be overridden by
userspace. Userspace provided netfilter state is restricted, only hook and
protocol families can be overridden and only to ipv4/ipv6.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-7-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is just to avoid ordering issues between multiple bpf programs,
this could be removed later in case it turns out to be too cautious.
bpf prog could still be shared with non-bpf hook, otherwise we'd have to
make conntrack hook registration fail just because a bpf program has
same priority.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-5-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This allows userspace ("nft list hooks") to show which bpf program
is attached to which hook.
Without this, user only knows bpf prog is attached at prio
x, y, z at INPUT and FORWARD, but can't tell which program is where.
v4: kdoc fixups (Simon Horman)
Link: https://lore.kernel.org/bpf/ZEELzpNCnYJuZyod@corigine.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-4-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds minimal support for BPF_PROG_TYPE_NETFILTER bpf programs
that will be invoked via the NF_HOOK() points in the ip stack.
Invocation incurs an indirect call. This is not a necessity: Its
possible to add 'DEFINE_BPF_DISPATCHER(nf_progs)' and handle the
program invocation with the same method already done for xdp progs.
This isn't done here to keep the size of this chunk down.
Verifier restricts verdicts to either DROP or ACCEPT.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-3-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add bpf_link support skeleton. To keep this reviewable, no bpf program
can be invoked yet, if a program is attached only a c-stub is called and
not the actual bpf program.
Defaults to 'y' if both netfilter and bpf syscall are enabled in kconfig.
Uapi example usage:
union bpf_attr attr = { };
attr.link_create.prog_fd = progfd;
attr.link_create.attach_type = 0; /* unused */
attr.link_create.netfilter.pf = PF_INET;
attr.link_create.netfilter.hooknum = NF_INET_LOCAL_IN;
attr.link_create.netfilter.priority = -128;
err = bpf(BPF_LINK_CREATE, &attr, sizeof(attr));
... this would attach progfd to ipv4:input hook.
Such hook gets removed automatically if the calling program exits.
BPF_NETFILTER program invocation is added in followup change.
NF_HOOK_OP_BPF enum will eventually be read from nfnetlink_hook, it
allows to tell userspace which program is attached at the given hook
when user runs 'nft hook list' command rather than just the priority
and not-very-helpful 'this hook runs a bpf prog but I can't tell which
one'.
Will also be used to disallow registration of two bpf programs with
same priority in a followup patch.
v4: arm32 cmpxchg only supports 32bit operand
s/prio/priority/
v3: restrict prog attachment to ip/ip6 for now, lets lift restrictions if
more use cases pop up (arptables, ebtables, netdev ingress/egress etc).
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-2-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ck6R
-----END PGP SIGNATURE-----
Merge tag 'nf-23-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Set on IPS_CONFIRMED before change_status() otherwise EBUSY is
bogusly hit. This bug was introduced in the 6.3 release cycle.
2) Fix nfnetlink_queue conntrack support: Set/dump timeout
accordingly for unconfirmed conntrack entries. Make sure this
is done after IPS_CONFIRMED is set on. This is an old bug, it
happens since the introduction of this feature.
* tag 'nf-23-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: fix wrong ct->timeout value
netfilter: conntrack: restore IPS_CONFIRMED out of nf_conntrack_hash_check_insert()
====================
Link: https://lore.kernel.org/r/20230421105700.325438-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most likely the last -next pull request for v6.4. We have changes all
over. rtw88 now supports SDIO bus and iwlwifi continues to work on
Wi-Fi 7 support. Not much stack changes this time.
Major changes:
cfg80211/mac80211
* fix some Fine Time Measurement (FTM) frames not being bufferable
* flush frames before key removal to avoid potential unencrypted
transmission depending on the hardware design
iwlwifi
* preparation for Wi-Fi 7 EHT and multi-link support
rtw88
* SDIO bus support
* RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support
rtw89
* framework firmware backwards compatibility
brcmfmac
* Cypress 43439 SDIO support
mt76
* mt7921 P2P support
* mt7996 mesh A-MSDU support
* mt7996 EHT support
* mt7996 coredump support
wcn36xx
* support for pronto v3 hardware
ath11k
* PCIe DeviceTree bindings
* WCN6750: enable SAR support
ath10k
* convert DeviceTree bindings to YAML
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmRCaTURHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvcRwf+NcLS4HbmqGZhBxl2LZVZ6AFCBM4ijDlO
pxdMiC4UxT+UApY1/9YXo0VS97M7paDJH+R/g1HcTvvKURHCmsdhYHm+R1MH+/uD
r8RfvJg4VtNnlUpsJh9jxt+e697KP15M7DF0sFlQzdIoTUl13Hp7YhI76zunAbAN
u1FBcVVJiCcJWbLolMzqAeBMUWUEG+GtHF6Zn5kChVU/p1nmwJMPUG3Qvb61a7Yc
BM1pQX8jQ8PBj+VrGPGvqX0BOdbxq0evauYScq2oTOhQ1fzTNWOsI1yI7AwApptR
itwQ2t1UK/C/EWpvWIBSd0nit1uwSx0Zsu/nSZlbKbrvIFwd5XnfwQ==
=Irrd
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.4
Most likely the last -next pull request for v6.4. We have changes all
over. rtw88 now supports SDIO bus and iwlwifi continues to work on
Wi-Fi 7 support. Not much stack changes this time.
Major changes:
cfg80211/mac80211
- fix some Fine Time Measurement (FTM) frames not being bufferable
- flush frames before key removal to avoid potential unencrypted
transmission depending on the hardware design
iwlwifi
- preparation for Wi-Fi 7 EHT and multi-link support
rtw88
- SDIO bus support
- RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support
rtw89
- framework firmware backwards compatibility
brcmfmac
- Cypress 43439 SDIO support
mt76
- mt7921 P2P support
- mt7996 mesh A-MSDU support
- mt7996 EHT support
- mt7996 coredump support
wcn36xx
- support for pronto v3 hardware
ath11k
- PCIe DeviceTree bindings
- WCN6750: enable SAR support
ath10k
- convert DeviceTree bindings to YAML
* tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits)
wifi: rtw88: Update spelling in main.h
wifi: airo: remove ISA_DMA_API dependency
wifi: rtl8xxxu: Simplify setting the initial gain
wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear}
wifi: rtl8xxxu: Don't print the vendor/product/serial
wifi: rtw88: Fix memory leak in rtw88_usb
wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant
wifi: rtw88: set pkg_type correctly for specific rtw8821c variants
wifi: rtw88: rtw8821c: Fix rfe_option field width
wifi: rtw88: usb: fix priority queue to endpoint mapping
wifi: rtw88: 8822c: add iface combination
wifi: rtw88: handle station mode concurrent scan with AP mode
wifi: rtw88: prevent scan abort with other VIFs
wifi: rtw88: refine reserved page flow for AP mode
wifi: rtw88: disallow PS during AP mode
wifi: rtw88: 8822c: extend reserved page number
wifi: rtw88: add port switch for AP mode
wifi: rtw88: add bitmap for dynamic port settings
wifi: rtw89: mac: use regular int as return type of DLE buffer request
wifi: mac80211: remove return value check of debugfs_create_dir()
...
====================
Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Packet sockets, like tap, can be used as the backend for kernel vhost.
In packet sockets, virtio net header size is currently hardcoded to be
the size of struct virtio_net_hdr, which is 10 bytes; however, it is not
always the case: some virtio features, such as mrg_rxbuf, need virtio
net header to be 12-byte long.
Mergeable buffers, as a virtio feature, is worthy of supporting: packets
that are larger than one-mbuf size will be dropped in vhost worker's
handle_rx if mrg_rxbuf feature is not used, but large packets
cannot be avoided and increasing mbuf's size is not economical.
With this virtio feature enabled by virtio-user, packet sockets with
hardcoded 10-byte virtio net header will parse mac head incorrectly in
packet_snd by taking the last two bytes of virtio net header as part of
mac header.
This incorrect mac header parsing will cause packet to be dropped due to
invalid ether head checking in later under-layer device packet receiving.
By adding extra field vnet_hdr_sz with utilizing holes in struct
packet_sock to record currently used virtio net header size and supporting
extra sockopt PACKET_VNET_HDR_SZ to set specified vnet_hdr_sz, packet
sockets can know the exact length of virtio net header that virtio user
gives.
In packet_snd, tpacket_snd and packet_recvmsg, instead of using
hardcoded virtio net header size, it can get the exact vnet_hdr_sz from
corresponding packet_sock, and parse mac header correctly based on this
information to avoid the packets being mistakenly dropped.
Signed-off-by: Jianfeng Tan <henry.tjf@antgroup.com>
Co-developed-by: Anqi Shen <amy.saq@antgroup.com>
Signed-off-by: Anqi Shen <amy.saq@antgroup.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new bridge port attribute that allows user space to enable
per-{Port, VLAN} neighbor suppression. Example:
# bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]'
false
# bridge link set dev swp1 neigh_vlan_suppress on
# bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]'
true
# bridge link set dev swp1 neigh_vlan_suppress off
# bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]'
false
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new VLAN attribute that allows user space to set the neighbor
suppression state of the port VLAN. Example:
# bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]'
false
# bridge vlan set vid 10 dev swp1 neigh_suppress on
# bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]'
true
# bridge vlan set vid 10 dev swp1 neigh_suppress off
# bridge -d -j -p vlan show dev swp1 vid 10 | jq '.[]["vlans"][]["neigh_suppress"]'
false
# bridge vlan set vid 10 dev br0 neigh_suppress on
Error: bridge: Can't set neigh_suppress for non-port vlans.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the bridge is not VLAN-aware (i.e., VLAN ID is 0), determine if
neighbor suppression is enabled on a given bridge port solely based on
the existing 'BR_NEIGH_SUPPRESS' flag.
Otherwise, if the bridge is VLAN-aware, first check if per-{Port, VLAN}
neighbor suppression is enabled on the given bridge port using the
'BR_NEIGH_VLAN_SUPPRESS' flag. If so, look up the VLAN and check whether
it has neighbor suppression enabled based on the per-VLAN
'BR_VLFLAG_NEIGH_SUPPRESS_ENABLED' flag.
If the bridge is VLAN-aware, but the bridge port does not have
per-{Port, VLAN} neighbor suppression enabled, then fallback to
determine neighbor suppression based on the 'BR_NEIGH_SUPPRESS' flag.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, there are various places in the bridge data path that check
whether neighbor suppression is enabled on a given bridge port.
As a preparation for per-{Port, VLAN} neighbor suppression, encapsulate
this logic in a function and pass the VLAN ID of the packet as an
argument.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bridge driver gates the neighbor suppression code behind an internal
per-bridge flag called 'BROPT_NEIGH_SUPPRESS_ENABLED'. The flag is set
when at least one bridge port has neighbor suppression enabled.
As a preparation for per-{Port, VLAN} neighbor suppression, make sure
the global flag is also set if per-{Port, VLAN} neighbor suppression is
enabled. That is, when the 'BR_NEIGH_VLAN_SUPPRESS' flag is set on at
least one bridge port.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two internal flags that will be used to enable / disable per-{Port,
VLAN} neighbor suppression:
1. 'BR_NEIGH_VLAN_SUPPRESS': A per-port flag used to indicate that
per-{Port, VLAN} neighbor suppression is enabled on the bridge port.
When set, 'BR_NEIGH_SUPPRESS' has no effect.
2. 'BR_VLFLAG_NEIGH_SUPPRESS_ENABLED': A per-VLAN flag used to indicate
that neighbor suppression is enabled on the given VLAN.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subsequent patches are going to add per-{Port, VLAN} neighbor
suppression, which will require br_flood() to potentially suppress ARP /
NS packets on a per-{Port, VLAN} basis.
As a preparation, pass the VLAN ID of the packet as another argument to
br_flood().
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bridge does not flood ARP / NS packets for which a reply was sent to
bridge ports that have neighbor suppression enabled.
Subsequent patches are going to add per-{Port, VLAN} neighbor
suppression, which is going to make it more expensive to check whether
neighbor suppression is enabled since a VLAN lookup will be required.
Therefore, instead of unnecessarily performing this lookup for every
packet, only perform it for ARP / NS packets for which a reply was sent.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for MACsec offload operations for VLAN driver
to allow offloading MACsec when VLAN's real device supports
Macsec offload by forwarding the offload request to it.
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch deletes the flexible-array hmac[] from the structure
sctp_authhdr to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/auth.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:735:29: warning: nested flexible array
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch deletes the flexible-array peer_init[] from the structure
sctp_cookie to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/sm_make_chunk.c: note: in included file (through include/net/sctp/sctp.h):
./include/net/sctp/structs.h:1588:28: warning: nested flexible array
./include/net/sctp/structs.h:343:28: warning: nested flexible array
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch deletes the flexible-array variable[] from the structure
sctp_sackhdr and sctp_errhdr to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/sm_statefuns.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:451:28: warning: nested flexible array
./include/linux/sctp.h:393:29: warning: nested flexible array
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch deletes the flexible-array skip[] from the structure
sctp_ifwdtsn/fwdtsn_hdr to avoid some sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/stream_interleave.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:611:32: warning: nested flexible array
./include/linux/sctp.h:628:33: warning: nested flexible array
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch deletes the flexible-array params[] from the structure
sctp_inithdr, sctp_addiphdr and sctp_reconf_chunk to avoid some
sparse warnings:
# make C=2 CF="-Wflexible-array-nested" M=./net/sctp/
net/sctp/input.c: note: in included file (through include/net/sctp/structs.h, include/net/sctp/sctp.h):
./include/linux/sctp.h:278:29: warning: nested flexible array
./include/linux/sctp.h:675:30: warning: nested flexible array
This warning is reported if a structure having a flexible array
member is included by other structures.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At the stage of direction checks, the netdev reference tracker is
already initialized, but released with wrong *_put() call.
Fixes: 919e43fad5 ("xfrm: add an interface to offload policy")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Failure to add offloaded policy will cause to the following
error once user will try to reload driver.
Unregister_netdevice: waiting for eth3 to become free. Usage count = 2
This was caused by xfrm_dev_policy_add() which increments reference
to net_device. That reference was supposed to be decremented
in xfrm_dev_policy_free(). However the latter wasn't called.
unregister_netdevice: waiting for eth3 to become free. Usage count = 2
leaked reference.
xfrm_dev_policy_add+0xff/0x3d0
xfrm_policy_construct+0x352/0x420
xfrm_add_policy+0x179/0x320
xfrm_user_rcv_msg+0x1d2/0x3d0
netlink_rcv_skb+0xe0/0x210
xfrm_netlink_rcv+0x45/0x50
netlink_unicast+0x346/0x490
netlink_sendmsg+0x3b0/0x6c0
sock_sendmsg+0x73/0xc0
sock_write_iter+0x13b/0x1f0
vfs_write+0x528/0x5d0
ksys_write+0x120/0x150
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: 919e43fad5 ("xfrm: add an interface to offload policy")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
It can be really hard to analyse or debug why packets are
going missing in mac80211, so add the needed infrastructure
to use use the new per-subsystem drop reasons.
We actually use two drop reason subsystems here because of
the different handling of frames that are dropped but still
go to monitor for old versions of hostapd, and those that
are just completely unusable (e.g. crypto failed.)
Annotate a few reasons here just to illustrate this, we'll
need to go through and annotate more of them later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend drop reasons to make them usable by subsystems
other than core by reserving the high 16 bits for a
new subsystem ID, of which 0 of course is used for the
existing reasons immediately.
To still be able to have string reasons, restructure
that code a bit to make the loopup under RCU, the only
user of this (right now) is drop_monitor.
Link: https://lore.kernel.org/netdev/00659771ed54353f92027702c5bbb84702da62ce.camel@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ICMPv6 error packets are not sent to the anycast destinations and this
prevents things like traceroute from working. So create a setting similar
to ECHO when dealing with Anycast sources (icmpv6_echo_ignore_anycast).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230419013238.2691167-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The verify-enabled boolean (ETHTOOL_A_MM_VERIFY_ENABLED) was intended to
be a sub-setting of tx-enabled (ETHTOOL_A_MM_TX_ENABLED). IOW, MAC Merge
TX can be enabled with or without verification, but verification with TX
disabled makes no sense.
The pmac-enabled boolean (ETHTOOL_A_MM_PMAC_ENABLED) was intended to be
a global toggle from an API perspective, whereas tx-enabled just handles
the TX direction. IOW, the pMAC can be enabled with or without TX, but
it doesn't make sense to enable TX if the pMAC is not enabled.
Add two checks which sanitize and reject these invalid cases.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lookups by descriptor are better off closer to syscall surface...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__kfree_skb_defer() uses the old naming where "defer" meant
slab bulk free/alloc APIs. In the meantime we also made
__kfree_skb_defer() feed the per-NAPI skb cache, which
implies bulk APIs. So take away the 'defer' and add 'napi'.
While at it add a drop reason. This only matters on the
tx_action path, if the skb has a frag_list. But getting
rid of a SKB_DROP_REASON_NOT_SPECIFIED seems like a net
benefit so why not.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230420020005.815854-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jesper points out that we must prevent recycling into cache
after page_pool_destroy() is called, because page_pool_destroy()
is not synchronized with recycling (some pages may still be
outstanding when destroy() gets called).
I assumed this will not happen because NAPI can't be scheduled
if its page pool is being destroyed. But I missed the fact that
NAPI may get reused. For instance when user changes ring configuration
driver may allocate a new page pool, stop NAPI, swap, start NAPI,
and then destroy the old pool. The NAPI is running so old page
pool will think it can recycle to the cache, but the consumer
at that point is the destroy() path, not NAPI.
To avoid extra synchronization let the drivers do "unlinking"
during the "swap" stage while NAPI is indeed disabled.
Fixes: 8c48eea3ad ("page_pool: allow caching from safely localized NAPI")
Reported-by: Jesper Dangaard Brouer <jbrouer@redhat.com>
Link: https://lore.kernel.org/all/e8df2654-6a5b-3c92-489d-2fe5e444135f@redhat.com/
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/20230419182006.719923-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- sched: clear actions pointer in miss cookie init fail
- mptcp: fix accept vs worker race
- bpf: fix bpf_arch_text_poke() with new_addr == NULL on s390
- eth: bnxt_en: fix a possible NULL pointer dereference in unload path
- eth: veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
Current release - new code bugs:
- eth: revert "net/mlx5: Enable management PF initialization"
Previous releases - regressions:
- netfilter: fix recent physdev match breakage
- bpf: fix incorrect verifier pruning due to missing register precision taints
- eth: virtio_net: fix overflow inside xdp_linearize_page()
- eth: cxgb4: fix use after free bugs caused by circular dependency problem
- eth: mlxsw: pci: fix possible crash during initialization
Previous releases - always broken:
- sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg
- netfilter: validate catch-all set elements
- bridge: don't notify FDB entries with "master dynamic"
- eth: bonding: fix memory leak when changing bond type to ethernet
- eth: i40e: fix accessing vsi->active_filters without holding lock
Misc:
- Mat is back as MPTCP co-maintainer
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=xUNa
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
There are a few fixes for new code bugs, including the Mellanox one
noted in the last networking pull. No known regressions outstanding.
Current release - regressions:
- sched: clear actions pointer in miss cookie init fail
- mptcp: fix accept vs worker race
- bpf: fix bpf_arch_text_poke() with new_addr == NULL on s390
- eth: bnxt_en: fix a possible NULL pointer dereference in unload
path
- eth: veth: take into account peer device for
NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
Current release - new code bugs:
- eth: revert "net/mlx5: Enable management PF initialization"
Previous releases - regressions:
- netfilter: fix recent physdev match breakage
- bpf: fix incorrect verifier pruning due to missing register
precision taints
- eth: virtio_net: fix overflow inside xdp_linearize_page()
- eth: cxgb4: fix use after free bugs caused by circular dependency
problem
- eth: mlxsw: pci: fix possible crash during initialization
Previous releases - always broken:
- sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg
- netfilter: validate catch-all set elements
- bridge: don't notify FDB entries with "master dynamic"
- eth: bonding: fix memory leak when changing bond type to ethernet
- eth: i40e: fix accessing vsi->active_filters without holding lock
Misc:
- Mat is back as MPTCP co-maintainer"
* tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
net: bridge: switchdev: don't notify FDB entries with "master dynamic"
Revert "net/mlx5: Enable management PF initialization"
MAINTAINERS: Resume MPTCP co-maintainer role
mailmap: add entries for Mat Martineau
e1000e: Disable TSO on i219-LM card to increase speed
bnxt_en: fix free-runnig PHC mode
net: dsa: microchip: ksz8795: Correctly handle huge frame configuration
bpf: Fix incorrect verifier pruning due to missing register precision taints
hamradio: drop ISA_DMA_API dependency
mlxsw: pci: Fix possible crash during initialization
mptcp: fix accept vs worker race
mptcp: stops worker on unaccepted sockets at listener close
net: rpl: fix rpl header size calculation
net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()
bonding: Fix memory leak when changing bond type to Ethernet
veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()
bnxt_en: Fix a possible NULL pointer dereference in unload path
bnxt_en: Do not initialize PTP on older P3/P4 chips
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
...
Smatch complains that:
debugfs_hw_add() warn: 'statsd' is an error pointer or valid
Debugfs checks are generally not supposed to be checked for errors
and it is not necessary here.
Just delete the dead code.
Signed-off-by: Yingsha Xu <ysxu@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230419104548.30124-1-ysxu@hust.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is a structural problem in switchdev, where the flag bits in
struct switchdev_notifier_fdb_info (added_by_user, is_local etc) only
represent a simplified / denatured view of what's in struct
net_bridge_fdb_entry :: flags (BR_FDB_ADDED_BY_USER, BR_FDB_LOCAL etc).
Each time we want to pass more information about struct
net_bridge_fdb_entry :: flags to struct switchdev_notifier_fdb_info
(here, BR_FDB_STATIC), we find that FDB entries were already notified to
switchdev with no regard to this flag, and thus, switchdev drivers had
no indication whether the notified entries were static or not.
For example, this command:
ip link add br0 type bridge && ip link set swp0 master br0
bridge fdb add dev swp0 00:01:02:03:04:05 master dynamic
has never worked as intended with switchdev. It causes a struct
net_bridge_fdb_entry to be passed to br_switchdev_fdb_notify() which has
a single flag set: BR_FDB_ADDED_BY_USER.
This is further passed to the switchdev notifier chain, where interested
drivers have no choice but to assume this is a static (does not age) and
sticky (does not migrate) FDB entry. So currently, all drivers offload
it to hardware as such, as can be seen below ("offload" is set).
bridge fdb get 00:01:02:03:04:05 dev swp0 master
00:01:02:03:04:05 dev swp0 offload master br0
The software FDB entry expires $ageing_time centiseconds after the
kernel last sees a packet with this MAC SA, and the bridge notifies its
deletion as well, so it eventually disappears from hardware too.
This is a problem, because it is actually desirable to start offloading
"master dynamic" FDB entries correctly - they should expire $ageing_time
centiseconds after the *hardware* port last sees a packet with this
MAC SA - and this is how the current incorrect behavior was discovered.
With an offloaded data plane, it can be expected that software only sees
exception path packets, so an otherwise active dynamic FDB entry would
be aged out by software sooner than it should.
With the change in place, these FDB entries are no longer offloaded:
bridge fdb get 00:01:02:03:04:05 dev swp0 master
00:01:02:03:04:05 dev swp0 master br0
and this also constitutes a better way (assuming a backport to stable
kernels) for user space to determine whether the kernel has the
capability of doing something sane with these or not.
As opposed to "master dynamic" FDB entries, on the current behavior of
which no one currently depends on (which can be deduced from the lack of
kselftests), Ido Schimmel explains that entries with the "extern_learn"
flag (BR_FDB_ADDED_BY_EXT_LEARN) should still be notified to switchdev,
since the spectrum driver listens to them (and this is kind of okay,
because although they are treated identically to "static", they are
expected to not age, and to roam).
Fixes: 6b26b51b1d ("net: bridge: Add support for notifying devices about FDB add/del")
Link: https://lore.kernel.org/netdev/20230327115206.jk5q5l753aoelwus@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230418155902.898627-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These verify the API contracts and help exercise lifetime rules for
consumer sockets and handshake_req structures.
One way to run these tests:
./tools/testing/kunit/kunit.py run --kunitconfig ./net/handshake/.kunitconfig
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To enable kernel consumers of TLS to request a TLS handshake, add
support to net/handshake/ to request a handshake upcall.
This patch also acts as a template for adding handshake upcall
support for other kernel transport layer security providers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a kernel consumer needs a transport layer security session, it
first needs a handshake to negotiate and establish a session. This
negotiation can be done in user space via one of the several
existing library implementations, or it can be done in the kernel.
No in-kernel handshake implementations yet exist. In their absence,
we add a netlink service that can:
a. Notify a user space daemon that a handshake is needed.
b. Once notified, the daemon calls the kernel back via this
netlink service to get the handshake parameters, including an
open socket on which to establish the session.
c. Once the handshake is complete, the daemon reports the
session status and other information via a second netlink
operation. This operation marks that it is safe for the
kernel to use the open socket and the security session
established there.
The notification service uses a multicast group. Each handshake
mechanism (eg, tlshd) adopts its own group number so that the
handshake services are completely independent of one another. The
kernel can then tell via netlink_has_listeners() whether a handshake
service is active and prepared to handle a handshake request.
A new netlink operation, ACCEPT, acts like accept(2) in that it
instantiates a file descriptor in the user space daemon's fd table.
If this operation is successful, the reply carries the fd number,
which can be treated as an open and ready file descriptor.
While user space is performing the handshake, the kernel keeps its
muddy paws off the open socket. A second new netlink operation,
DONE, indicates that the user space daemon is finished with the
socket and it is safe for the kernel to use again. The operation
also indicates whether a session was established successfully.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently call_bind_status places a hard limit of 3 to the number of
retries on EACCES error. This limit was done to prevent NLM unlock
requests from being hang forever when the server keeps returning garbage.
However this change causes problem for cases when NLM service takes
longer than 9 seconds to register with the port mapper after a restart.
This patch removes this hard coded limit and let the RPC handles
the retry based on the standard hard/soft task semantics.
Fixes: 0b760113a3 ("NLM: Don't hang forever on NLM unlock requests")
Reported-by: Helen Chao <helen.chao@oracle.com>
Tested-by: Helen Chao <helen.chao@oracle.com>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit c519fe9a4f ("bnxt: add dma mapping attributes") added
DMA_ATTR_WEAK_ORDERING to DMA attrs on bnxt. It has since spread
to a few more drivers (possibly as a copy'n'paste).
DMA_ATTR_WEAK_ORDERING only seems to matter on Sparc and PowerPC/cell,
the rarity of these platforms is likely why we never bothered adding
the attribute in the page pool, even though it should be safe to add.
To make the page pool migration in drivers which set this flag less
of a risk (of regressing the precious sparc database workloads or
whatever needed this) let's add DMA_ATTR_WEAK_ORDERING on all
page pool DMA mappings.
We could make this a driver opt-in but frankly I don't think it's
worth complicating the API. I can't think of a reason why device
accesses to packet memory would have to be ordered.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/20230417152805.331865-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Address two issues with the new GSS krb5 Kunit tests
-----BEGIN PGP SIGNATURE-----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=a/Wj
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address two issues with the new GSS krb5 Kunit tests
* tag 'nfsd-6.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix failures of checksum Kunit tests
sunrpc: Fix RFC6803 encryption test
SCTP is not universally deployed, allow hiding its bit
from the skb.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Datacenter kernel builds will very likely not include WIRELESS,
so let them shave 2 bits off the skb by hiding the wifi fields.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
(struct nf_conn)->timeout is an interval before the conntrack
confirmed. After confirmed, it becomes a timestamp.
It is observed that timeout of an unconfirmed conntrack:
- Set by calling ctnetlink_change_timeout(). As a result,
`nfct_time_stamp` was wrongly added to `ct->timeout` twice.
- Get by calling ctnetlink_dump_timeout(). As a result,
`nfct_time_stamp` was wrongly subtracted.
Call Trace:
<TASK>
dump_stack_lvl
ctnetlink_dump_timeout
__ctnetlink_glue_build
ctnetlink_glue_build
__nfqnl_enqueue_packet
nf_queue
nf_hook_slow
ip_mc_output
? __pfx_ip_finish_output
ip_send_skb
? __pfx_dst_output
udp_send_skb
udp_sendmsg
? __pfx_ip_generic_getfrag
sock_sendmsg
Separate the 2 cases in:
- Setting `ct->timeout` in __nf_ct_set_timeout().
- Getting `ct->timeout` in ctnetlink_dump_timeout().
Pablo appends:
Update ctnetlink to set up the timeout _after_ the IPS_CONFIRMED flag is
set on, otherwise conntrack creation via ctnetlink breaks.
Note that the problem described in this patch occurs since the
introduction of the nfnetlink_queue conntrack support, select a
sufficiently old Fixes: tag for -stable kernel to pick up this fix.
Fixes: a4b4766c3c ("netfilter: nfnetlink_queue: rename related to nfqueue attaching conntrack info")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch fixes a missing 8 byte for the header size calculation. The
ipv6_rpl_srh_size() is used to check a skb_pull() on skb->data which
points to skb_transport_header(). Currently we only check on the
calculated addresses fields using CmprI and CmprE fields, see:
https://www.rfc-editor.org/rfc/rfc6554#section-3
there is however a missing 8 byte inside the calculation which stands
for the fields before the addresses field. Those 8 bytes are represented
by sizeof(struct ipv6_rpl_sr_hdr) expression.
Fixes: 8610c7c6e3 ("net: ipv6: add support for rpl sr exthdr")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Reported-by: maxpl0it <maxpl0it@protonmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Unbreak br_netfilter physdev match support, from Florian Westphal.
2) Use GFP_KERNEL_ACCOUNT for stateful/policy objects, from Chen Aotian.
3) Use IS_ENABLED() in nf_reset_trace(), from Florian Westphal.
4) Fix validation of catch-all set element.
5) Tighten requirements for catch-all set elements.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
netfilter: nf_tables: validate catch-all set elements
netfilter: nf_tables: fix ifdef to also consider nf_tables=m
netfilter: nf_tables: Modify nla_memdup's flag to GFP_KERNEL_ACCOUNT
netfilter: br_netfilter: fix recent physdev match breakage
====================
Link: https://lore.kernel.org/r/20230418145048.67270-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fundamentally semaphores are a counted primitive, but
DEFINE_SEMAPHORE() does not expose this and explicitly creates a
binary semaphore.
Change DEFINE_SEMAPHORE() to take a number argument and use that in the
few places that open-coded it using __SEMAPHORE_INITIALIZER().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[mcgrof: add some tribal knowledge about why some folks prefer
binary sempahores over mutexes]
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
It is unused and should not be used. In order to avoid limitations in
4-address mode, the driver should always use ieee80211_tx_status_ext for
802.3 frames with a valid sta pointer.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230417133751.79160-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If NFT_SET_ELEM_CATCHALL is set on, then userspace provides no set element
key. Otherwise, bail out with -EINVAL.
Fixes: aaa31047a6 ("netfilter: nftables: add catch-all set element support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
catch-all set element might jump/goto to chain that uses expressions
that require validation.
Fixes: aaa31047a6 ("netfilter: nftables: add catch-all set element support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There are some use-cases where it is desirable to use bpf_redirect()
in combination with ifb device, which currently is not supported, for
example, around filtering inbound traffic with BPF to then push it to
ifb which holds the qdisc for shaping in contrast to doing that on the
egress device.
Toke mentions the following case related to OpenWrt:
Because there's not always a single egress on the other side. These are
mainly home routers, which tend to have one or more WiFi devices bridged
to one or more ethernet ports on the LAN side, and a single upstream WAN
port. And the objective is to control the total amount of traffic going
over the WAN link (in both directions), to deal with bufferbloat in the
ISP network (which is sadly still all too prevalent).
In this setup, the traffic can be split arbitrarily between the links
on the LAN side, and the only "single bottleneck" is the WAN link. So we
install both egress and ingress shapers on this, configured to something
like 95-98% of the true link bandwidth, thus moving the queues into the
qdisc layer in the router. It's usually necessary to set the ingress
bandwidth shaper a bit lower than the egress due to being "downstream"
of the bottleneck link, but it does work surprisingly well.
We usually use something like a matchall filter to put all ingress
traffic on the ifb, so doing the redirect from BPF has not been an
immediate requirement thus far. However, it does seem a bit odd that
this is not possible, and we do have a BPF-based filter that layers on
top of this kind of setup, which currently uses u32 as the ingress
filter and so it could presumably be improved to use BPF instead if
that was available.
Reported-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Reported-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://git.openwrt.org/?p=project/qosify.git;a=blob;f=README
Link: https://lore.kernel.org/bpf/875y9yzbuy.fsf@toke.dk
Link: https://lore.kernel.org/r/8cebc8b2b6e967e10cbafe2ffd6795050e74accd.1681739137.git.daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Scott reports that when the new GSS krb5 Kunit tests are built as
a separate module and loaded, the RFC 6803 and RFC 8009 checksum
tests all fail, even though they pass when run under kunit.py.
It appears that passing a buffer backed by static const memory to
gss_krb5_checksum() is a problem. A printk in checksum_case() shows
the correct plaintext, but by the time the buffer has been converted
to a scatterlist and arrives at checksummer(), it contains all
zeroes.
Replacing this buffer with one that is dynamically allocated fixes
the issue.
Reported-by: Scott Mayhew <smayhew@redhat.com>
Fixes: 02142b2ca8 ("SUNRPC: Add checksum KUnit tests for the RFC 6803 encryption types")
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Palash reports a UAF when using a modified version of syzkaller[1].
When 'tcf_exts_miss_cookie_base_alloc()' fails in 'tcf_exts_init_ex()'
a call to 'tcf_exts_destroy()' is made to free up the tcf_exts
resources.
In flower, a call to '__fl_put()' when 'tcf_exts_init_ex()' fails is made;
Then calling 'tcf_exts_destroy()', which triggers an UAF since the
already freed tcf_exts action pointer is lingering in the struct.
Before the offending patch, this was not an issue since there was no
case where the tcf_exts action pointer could linger. Therefore, restore
the old semantic by clearing the action pointer in case of a failure to
initialize the miss_cookie.
[1] https://github.com/cmu-pasta/linux-kernel-enriched-corpus
v1->v2: Fix compilation on configs without tc actions (kernel test robot)
Fixes: 80cd22c35c ("net/sched: cls_api: Support hardware miss to tc action")
Reported-by: Palash Oswal <oswalpalash@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two new peer capables have been added since sctp_diag was
introduced into SCTP. When dumping the peer capables, these two new
peer capables should also be included. To not break the old capables,
reconf_capable takes the old hostname_address bit, and intl_capable
uses the higher available bit in sctpi_peer_capable.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the latest RFC9260, the Host Name Address param has been deprecated.
For INIT chunk:
Note 3: An INIT chunk MUST NOT contain the Host Name Address
parameter. The receiver of an INIT chunk containing a Host Name
Address parameter MUST send an ABORT chunk and MAY include an
"Unresolvable Address" error cause.
For Supported Address Types:
The value indicating the Host Name Address parameter MUST NOT be
used when sending this parameter and MUST be ignored when receiving
this parameter.
Currently Linux SCTP doesn't really support Host Name Address param,
but only saves some flag and print debug info, which actually won't
even be triggered due to the verification in sctp_verify_param().
This patch is to delete those dead code.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some functions, 'remaining' variable was given in argument and/or set
but never read.
net/mptcp/options.c:779:3: warning: Value stored to 'remaining' is never
read [clang-analyzer-deadcode.DeadStores].
net/mptcp/options.c:547:3: warning: Value stored to 'remaining' is never
read [clang-analyzer-deadcode.DeadStores].
The issue has been reported internally by Alibaba CI.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Suggested-by: Mat Martineau <martineau@kernel.org>
Co-developed-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_userspace_pm_append_new_local_addr() has always exclusively been
used in pm_userspace.c since its introduction in
commit 4638de5aef ("mptcp: handle local addrs announced by userspace PMs").
So make it static.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When cleaning up unaccepted mptcp socket still laying inside
the listener queue at listener close time, such sockets will
go through a regular close, waiting for a timeout before
shutting down the subflows.
There is no need to keep the kernel resources in use for
such a possibly long time: short-circuit to fast-close.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the long run this will simplify the mptcp code and will
allow for more consistent behavior. Move the first subflow
allocation out of the sock->init ops into the __mptcp_nmpc_socket()
helper.
Since the first subflow creation can now happen after the first
setsockopt() we additionally need to invoke mptcp_sockopt_sync()
on it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
So that we can avoid a bunch of check in fastpath. Additionally we
can specialize such check according to the specific fastopen method
- defer_connect vs MSG_FASTOPEN.
The latter bits will simplify the next patches.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a few spots, the mptcp code invokes the __mptcp_nmpc_socket() helper
multiple times under the same socket lock scope. Additionally, in such
places, the socket status ensures that there is no MP capable handshake
running.
Under the above condition we can replace the later __mptcp_nmpc_socket()
helper invocation with direct access to the msk->subflow pointer and
better document such access is not supposed to fail with WARN().
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 3a236aef28 ("mptcp: refactor passive socket initialization"),
every mptcp_pm_fully_established() call is always invoked with a
GFP_ATOMIC argument. We can then drop it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We've managed to improve the UX for kptrs significantly over the last 9
months. All of the prior main use cases, struct bpf_cpumask *, struct
task_struct *, and struct cgroup *, have all been updated to be
synchronized mainly using RCU. In other words, their KF_ACQUIRE kfunc
calls are all KF_RCU, and the pointers themselves are MEM_RCU and can be
accessed in an RCU read region in BPF.
In a follow-on change, we'll be removing the KF_KPTR_GET kfunc flag.
This patch prepares for that by removing the
bpf_kfunc_call_test_kptr_get() kfunc, and all associated selftests.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230416084928.326135-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Recent patches to mlx5 mentioned a regression when moving from
driver local page pool to only using the generic page pool code.
Page pool has two recycling paths (1) direct one, which runs in
safe NAPI context (basically consumer context, so producing
can be lockless); and (2) via a ptr_ring, which takes a spin
lock because the freeing can happen from any CPU; producer
and consumer may run concurrently.
Since the page pool code was added, Eric introduced a revised version
of deferred skb freeing. TCP skbs are now usually returned to the CPU
which allocated them, and freed in softirq context. This places the
freeing (producing of pages back to the pool) enticingly close to
the allocation (consumer).
If we can prove that we're freeing in the same softirq context in which
the consumer NAPI will run - lockless use of the cache is perfectly fine,
no need for the lock.
Let drivers link the page pool to a NAPI instance. If the NAPI instance
is scheduled on the same CPU on which we're freeing - place the pages
in the direct cache.
With that and patched bnxt (XDP enabled to engage the page pool, sigh,
bnxt really needs page pool work :() I see a 2.6% perf boost with
a TCP stream test (app on a different physical core than softirq).
The CPU use of relevant functions decreases as expected:
page_pool_refill_alloc_cache 1.17% -> 0%
_raw_spin_lock 2.41% -> 0.98%
Only consider lockless path to be safe when NAPI is scheduled
- in practice this should cover majority if not all of steady state
workloads. It's usually the NAPI kicking in that causes the skb flush.
The main case we'll miss out on is when application runs on the same
CPU as NAPI. In that case we don't use the deferred skb free path.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We maintain a NAPI-local cache of skbs which is fed by napi_consume_skb().
Going forward we will also try to cache head and data pages.
Plumb the "are we in a normal NAPI context" information thru
deeper into the freeing path, up to skb_release_data() and
skb_free_head()/skb_pp_recycle(). The "not normal NAPI context"
comes from netpoll which passes budget of 0 to try to reap
the Tx completions but not perform any Rx.
Use "bool napi_safe" rather than bare "int budget",
the further we get from NAPI the more confusing the budget
argument may seem (particularly whether 0 or MAX is the
correct value to pass in when not in NAPI).
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
do_ipv6_setsockopt() makes use of struct msghdr::msg_control in the
IPV6_2292PKTOPTIONS case. Make sure to initialise
msg_control_is_user accordingly.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
cmsghdr_from_user_compat_to_kern() is an unusual case w.r.t. how
the kmsg->msg_control* fields are used. The input struct msghdr
holds a pointer to a user buffer, i.e. ksmg->msg_control_user is
active. However, upon success, a kernel pointer is stored in
kmsg->msg_control. kmsg->msg_control_is_user should therefore be
updated accordingly.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 1f466e1f15 ("net: cleanly handle kernel vs user
buffers for ->msg_control"), pointers to user buffers should be
stored in struct msghdr::msg_control_user, instead of the
msg_control field. Most users of msg_control have already been
converted (where user buffers are involved), but not all of them.
This patch attempts to address the remaining cases. An exception is
made for null checks, as it should be safe to use msg_control
unconditionally for that purpose.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This replaces 'skb_queue_tail()' with 'virtio_vsock_skb_queue_tail()'.
The first one uses 'spin_lock_irqsave()', second uses 'spin_lock_bh()'.
There is no need to disable interrupts in the loopback transport as
there is no access to the queue with skbs from interrupt context. Both
virtio and vhost transports work in the same way.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the TCA_QFQ_LMAX value is not offered through nlattr, lmax is determined by the MTU value of the network device.
The MTU of the loopback device can be set up to 2^31-1.
As a result, it is possible to have an lmax value that exceeds QFQ_MIN_LMAX.
Due to the invalid lmax value, an index is generated that exceeds the QFQ_MAX_INDEX(=24) value, causing out-of-bounds read/write errors.
The following reports a oob access:
[ 84.582666] BUG: KASAN: slab-out-of-bounds in qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[ 84.583267] Read of size 4 at addr ffff88810f676948 by task ping/301
[ 84.583686]
[ 84.583797] CPU: 3 PID: 301 Comm: ping Not tainted 6.3.0-rc5 #1
[ 84.584164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 84.584644] Call Trace:
[ 84.584787] <TASK>
[ 84.584906] dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1))
[ 84.585108] print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
[ 84.585570] kasan_report (mm/kasan/report.c:538)
[ 84.585988] qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[ 84.586599] qfq_enqueue (net/sched/sch_qfq.c:1255)
[ 84.587607] dev_qdisc_enqueue (net/core/dev.c:3776)
[ 84.587749] __dev_queue_xmit (./include/net/sch_generic.h:186 net/core/dev.c:3865 net/core/dev.c:4212)
[ 84.588763] ip_finish_output2 (./include/net/neighbour.h:546 net/ipv4/ip_output.c:228)
[ 84.589460] ip_output (net/ipv4/ip_output.c:430)
[ 84.590132] ip_push_pending_frames (./include/net/dst.h:444 net/ipv4/ip_output.c:126 net/ipv4/ip_output.c:1586 net/ipv4/ip_output.c:1606)
[ 84.590285] raw_sendmsg (net/ipv4/raw.c:649)
[ 84.591960] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[ 84.592084] __sys_sendto (net/socket.c:2142)
[ 84.593306] __x64_sys_sendto (net/socket.c:2150)
[ 84.593779] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 84.593902] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 84.594070] RIP: 0033:0x7fe568032066
[ 84.594192] Code: 0e 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c09[ 84.594796] RSP: 002b:00007ffce388b4e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
Code starting with the faulting instruction
===========================================
[ 84.595047] RAX: ffffffffffffffda RBX: 00007ffce388cc70 RCX: 00007fe568032066
[ 84.595281] RDX: 0000000000000040 RSI: 00005605fdad6d10 RDI: 0000000000000003
[ 84.595515] RBP: 00005605fdad6d10 R08: 00007ffce388eeec R09: 0000000000000010
[ 84.595749] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[ 84.595984] R13: 00007ffce388cc30 R14: 00007ffce388b4f0 R15: 0000001d00000001
[ 84.596218] </TASK>
[ 84.596295]
[ 84.596351] Allocated by task 291:
[ 84.596467] kasan_save_stack (mm/kasan/common.c:46)
[ 84.596597] kasan_set_track (mm/kasan/common.c:52)
[ 84.596725] __kasan_kmalloc (mm/kasan/common.c:384)
[ 84.596852] __kmalloc_node (./include/linux/kasan.h:196 mm/slab_common.c:967 mm/slab_common.c:974)
[ 84.596979] qdisc_alloc (./include/linux/slab.h:610 ./include/linux/slab.h:731 net/sched/sch_generic.c:938)
[ 84.597100] qdisc_create (net/sched/sch_api.c:1244)
[ 84.597222] tc_modify_qdisc (net/sched/sch_api.c:1680)
[ 84.597357] rtnetlink_rcv_msg (net/core/rtnetlink.c:6174)
[ 84.597495] netlink_rcv_skb (net/netlink/af_netlink.c:2574)
[ 84.597627] netlink_unicast (net/netlink/af_netlink.c:1340 net/netlink/af_netlink.c:1365)
[ 84.597759] netlink_sendmsg (net/netlink/af_netlink.c:1942)
[ 84.597891] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[ 84.598016] ____sys_sendmsg (net/socket.c:2501)
[ 84.598147] ___sys_sendmsg (net/socket.c:2557)
[ 84.598275] __sys_sendmsg (./include/linux/file.h:31 net/socket.c:2586)
[ 84.598399] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 84.598520] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 84.598688]
[ 84.598744] The buggy address belongs to the object at ffff88810f674000
[ 84.598744] which belongs to the cache kmalloc-8k of size 8192
[ 84.599135] The buggy address is located 2664 bytes to the right of
[ 84.599135] allocated 7904-byte region [ffff88810f674000, ffff88810f675ee0)
[ 84.599544]
[ 84.599598] The buggy address belongs to the physical page:
[ 84.599777] page:00000000e638567f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10f670
[ 84.600074] head:00000000e638567f order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 84.600330] flags: 0x200000000010200(slab|head|node=0|zone=2)
[ 84.600517] raw: 0200000000010200 ffff888100043180 dead000000000122 0000000000000000
[ 84.600764] raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000
[ 84.601009] page dumped because: kasan: bad access detected
[ 84.601187]
[ 84.601241] Memory state around the buggy address:
[ 84.601396] ffff88810f676800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.601620] ffff88810f676880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.601845] >ffff88810f676900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602069] ^
[ 84.602243] ffff88810f676980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602468] ffff88810f676a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602693] ==================================================================
[ 84.602924] Disabling lock debugging due to kernel taint
Fixes: 3015f3d2a3 ("pkt_sched: enable QFQ to support TSO/GSO")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: Gwangun Jung <exsociety@gmail.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a duplication of the FP adminStatus logic introduced for
tc-mqprio. Offloading is done through the tc_mqprio_qopt_offload
structure embedded within tc_taprio_qopt_offload. So practically, if a
device driver is written to treat the mqprio portion of taprio just like
standalone mqprio, it gets unified handling of frame preemption.
I would have reused more code with taprio, but this is mostly netlink
attribute parsing, which is hard to transform into generic code without
having something that stinks as a result. We have the same variables
with the same semantics, just different nlattr type values
(TCA_MQPRIO_TC_ENTRY=5 vs TCA_TAPRIO_ATTR_TC_ENTRY=12;
TCA_MQPRIO_TC_ENTRY_FP=2 vs TCA_TAPRIO_TC_ENTRY_FP=3, etc) and
consequently, different policies for the nest.
Every time nla_parse_nested() is called, an on-stack table "tb" of
nlattr pointers is allocated statically, up to the maximum understood
nlattr type. That array size is hardcoded as a constant, but when
transforming this into a common parsing function, it would become either
a VLA (which the Linux kernel rightfully doesn't like) or a call to the
allocator.
Having FP adminStatus in tc-taprio can be seen as addressing the 802.1Q
Annex S.3 "Scheduling and preemption used in combination, no HOLD/RELEASE"
and S.4 "Scheduling and preemption used in combination with HOLD/RELEASE"
use cases. HOLD and RELEASE events are emitted towards the underlying
MAC Merge layer when the schedule hits a Set-And-Hold-MAC or a
Set-And-Release-MAC gate operation. So within the tc-taprio UAPI space,
one can distinguish between the 2 use cases by choosing whether to use
the TC_TAPRIO_CMD_SET_AND_HOLD and TC_TAPRIO_CMD_SET_AND_RELEASE gate
operations within the schedule, or just TC_TAPRIO_CMD_SET_GATES.
A small part of the change is dedicated to refactoring the max_sdu
nlattr parsing to put all logic under the "if" that tests for presence
of that nlattr.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IEEE 802.1Q-2018 clause 6.7.2 Frame preemption specifies that each
packet priority can be assigned to a "frame preemption status" value of
either "express" or "preemptible". Express priorities are transmitted by
the local device through the eMAC, and preemptible priorities through
the pMAC (the concepts of eMAC and pMAC come from the 802.3 MAC Merge
layer).
The FP adminStatus is defined per packet priority, but 802.1Q clause
12.30.1.1.1 framePreemptionAdminStatus also says that:
| Priorities that all map to the same traffic class should be
| constrained to use the same value of preemption status.
It is impossible to ignore the cognitive dissonance in the standard
here, because it practically means that the FP adminStatus only takes
distinct values per traffic class, even though it is defined per
priority.
I can see no valid use case which is prevented by having the kernel take
the FP adminStatus as input per traffic class (what we do here).
In addition, this also enforces the above constraint by construction.
User space network managers which wish to expose FP adminStatus per
priority are free to do so; they must only observe the prio_tc_map of
the netdev (which presumably is also under their control, when
constructing the mqprio netlink attributes).
The reason for configuring frame preemption as a property of the Qdisc
layer is that the information about "preemptible TCs" is closest to the
place which handles the num_tc and prio_tc_map of the netdev. If the
UAPI would have been any other layer, it would be unclear what to do
with the FP information when num_tc collapses to 0. A key assumption is
that only mqprio/taprio change the num_tc and prio_tc_map of the netdev.
Not sure if that's a great assumption to make.
Having FP in tc-mqprio can be seen as an implementation of the use case
defined in 802.1Q Annex S.2 "Preemption used in isolation". There will
be a separate implementation of FP in tc-taprio, for the other use
cases.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the multiplexed ndo_setup_tc() model which lacks a first-class
struct netlink_ext_ack * argument, the only way to pass the netlink
extended ACK message down to the device driver is to embed it within the
offload structure.
Do this for struct tc_mqprio_qopt_offload and struct tc_taprio_qopt_offload.
Since struct tc_taprio_qopt_offload also contains a tc_mqprio_qopt_offload
structure, and since device drivers might effectively reuse their mqprio
implementation for the mqprio portion of taprio, we make taprio set the
extack in both offload structures to point at the same netlink extack
message.
In fact, the taprio handling is a bit more tricky, for 2 reasons.
First is because the offload structure has a longer lifetime than the
extack structure. The driver is supposed to populate the extack
synchronously from ndo_setup_tc() and leave it alone afterwards.
To not have any use-after-free surprises, we zero out the extack pointer
when we leave taprio_enable_offload().
The second reason is because taprio does overwrite the extack message on
ndo_setup_tc() error. We need to switch to the weak form of setting an
extack message, which preserves a potential message set by the driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ferenc reports that a combination of poor iproute2 defaults and obscure
cases where the kernel returns -EINVAL make it difficult to understand
what is wrong with this command:
$ ip link add veth0 numtxqueues 8 numrxqueues 8 type veth peer name veth1
$ tc qdisc add dev veth0 root mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7
RTNETLINK answers: Invalid argument
Hopefully with this patch, the cause is clearer:
Error: Device does not support hardware offload.
The kernel was (and still is) rejecting this because iproute2 defaults
to "hw 1" if this command line option is not specified.
Link: https://lore.kernel.org/netdev/ede5e9a2f27bf83bfb86d3e8c4ca7b34093b99e2.camel@inf.elte.hu/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink attribute parsing in mqprio is a minesweeper game, with many
options having the possibility of being passed incorrectly and the user
being none the wiser.
Try to make errors less sour by giving user space some information
regarding what went wrong.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 4e8b86c062 ("mqprio: Introduce new hardware offload mode and
shaper in mqprio"), the TCA_OPTIONS format of mqprio was extended to
contain a fixed portion (of size NLA_ALIGN(sizeof struct tc_mqprio_qopt))
and a variable portion of other nlattrs (in the TCA_MQPRIO_* type space)
following immediately afterwards.
In commit feb2cf3dcf ("net/sched: mqprio: refactor nlattr parsing to a
separate function"), we've moved the nlattr handling to a smaller
function, but yet, a small parse_attr() still remains, and the larger
mqprio_parse_nlattr() still does not have access to the beginning, and
the length, of the TCA_OPTIONS region containing these other nlattrs.
In a future change, the mqprio qdisc will need to iterate through this
nlattr region to discover other attributes, so eliminate parse_attr()
and add 2 variables in mqprio_parse_nlattr() which hold the beginning
and the length of the nlattr range.
We avoid the need to memset when nlattr_opt_len has insufficient length
by pre-initializing the table "tb".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a wrapper over __ethtool_dev_mm_supported() which also calls
ethnl_ops_begin() and ethnl_ops_complete(). It can be used by other code
layers, such as tc, to make sure that preemptible TCs are supported
(this is true if an underlying MAC Merge layer exists).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZDhSiwAKCRDbK58LschI
g8cbAQCH4xrquOeDmYyGXFQGchHZAIj++tKg8ABU4+hYeJtrlwEA6D4W6wjoSZRk
mLSptZ9qro8yZA86BvyPvlBT1h9ELQA=
=StAc
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-04-13
We've added 260 non-merge commits during the last 36 day(s) which contain
a total of 356 files changed, 21786 insertions(+), 11275 deletions(-).
The main changes are:
1) Rework BPF verifier log behavior and implement it as a rotating log
by default with the option to retain old-style fixed log behavior,
from Andrii Nakryiko.
2) Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params, from Christian Ehrig.
3) Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton,
from Alexei Starovoitov.
4) Optimize hashmap lookups when key size is multiple of 4,
from Anton Protopopov.
5) Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps, from David Vernet.
6) Add support for stashing local BPF kptr into a map value via
bpf_kptr_xchg(). This is useful e.g. for rbtree node creation
for new cgroups, from Dave Marchevsky.
7) Fix BTF handling of is_int_ptr to skip modifiers to work around
tracing issues where a program cannot be attached, from Feng Zhou.
8) Migrate a big portion of test_verifier unit tests over to
test_progs -a verifier_* via inline asm to ease {read,debug}ability,
from Eduard Zingerman.
9) Several updates to the instruction-set.rst documentation
which is subject to future IETF standardization
(https://lwn.net/Articles/926882/), from Dave Thaler.
10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register
known bits information propagation, from Daniel Borkmann.
11) Add skb bitfield compaction work related to BPF with the overall goal
to make more of the sk_buff bits optional, from Jakub Kicinski.
12) BPF selftest cleanups for build id extraction which stand on its own
from the upcoming integration work of build id into struct file object,
from Jiri Olsa.
13) Add fixes and optimizations for xsk descriptor validation and several
selftest improvements for xsk sockets, from Kal Conley.
14) Add BPF links for struct_ops and enable switching implementations
of BPF TCP cong-ctls under a given name by replacing backing
struct_ops map, from Kui-Feng Lee.
15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable
offset stack read as earlier Spectre checks cover this,
from Luis Gerhorst.
16) Fix issues in copy_from_user_nofault() for BPF and other tracers
to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner
and Alexei Starovoitov.
17) Add --json-summary option to test_progs in order for CI tooling to
ease parsing of test results, from Manu Bretelle.
18) Batch of improvements and refactoring to prep for upcoming
bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator,
from Martin KaFai Lau.
19) Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations,
from Quentin Monnet.
20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting
the module name from BTF of the target and searching kallsyms of
the correct module, from Viktor Malik.
21) Improve BPF verifier handling of '<const> <cond> <non_const>'
to better detect whether in particular jmp32 branches are taken,
from Yonghong Song.
22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock.
A built-in cc or one from a kernel module is already able to write
to app_limited, from Yixin Shen.
Conflicts:
Documentation/bpf/bpf_devel_QA.rst
b7abcd9c65 ("bpf, doc: Link to submitting-patches.rst for general patch submission info")
0f10f647f4 ("bpf, docs: Use internal linking for link to netdev subsystem doc")
https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/
include/net/ip_tunnels.h
bc9d003dc4 ("ip_tunnel: Preserve pointer const in ip_tunnel_info_opts")
ac931d4cde ("ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices")
https://lore.kernel.org/all/20230413161235.4093777-1-broonie@kernel.org/
net/bpf/test_run.c
e5995bc7e2 ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption")
294635a816 ("bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES")
https://lore.kernel.org/all/20230320102619.05b80a98@canb.auug.org.au/
====================
Link: https://lore.kernel.org/r/20230413191525.7295-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Not all that quiet given spring celebrations, but "current" fixes
are thinning out, which is encouraging. One outstanding regression
in the mlx5 driver when using old FW, not blocking but we're pushing
for a fix.
Current release - new code bugs:
- eth: enetc: workaround for unresponsive pMAC after receiving
express traffic
Previous releases - regressions:
- rtnetlink: restore RTM_NEW/DELLINK notification behavior,
keep the pid/seq fields 0 for backward compatibility
Previous releases - always broken:
- sctp: fix a potential overflow in sctp_ifwdtsn_skip
- mptcp:
- use mptcp_schedule_work instead of open-coding it and make
the worker check stricter, to avoid scheduling work on closed
sockets
- fix NULL pointer dereference on fastopen early fallback
- skbuff: fix memory corruption due to a race between skb coalescing
and releasing clones confusing page_pool reference counting
- bonding: fix neighbor solicitation validation on backup slaves
- bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp
- bpf: arm64: fixed a BTI error on returning to patched function
- openvswitch: fix race on port output leading to inf loop
- sfp: initialize sfp->i2c_block_size at sfp allocation to avoid
returning a different errno than expected
- phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove
- Bluetooth: fix printing errors if LE Connection times out
- Bluetooth: assorted UaF, deadlock and data race fixes
- eth: macb: fix memory corruption in extended buffer descriptor mode
Misc:
- adjust the XDP Rx flow hash API to also include the protocol layers
over which the hash was computed
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=W+J2
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, and bluetooth.
Not all that quiet given spring celebrations, but "current" fixes are
thinning out, which is encouraging. One outstanding regression in the
mlx5 driver when using old FW, not blocking but we're pushing for a
fix.
Current release - new code bugs:
- eth: enetc: workaround for unresponsive pMAC after receiving
express traffic
Previous releases - regressions:
- rtnetlink: restore RTM_NEW/DELLINK notification behavior, keep the
pid/seq fields 0 for backward compatibility
Previous releases - always broken:
- sctp: fix a potential overflow in sctp_ifwdtsn_skip
- mptcp:
- use mptcp_schedule_work instead of open-coding it and make the
worker check stricter, to avoid scheduling work on closed
sockets
- fix NULL pointer dereference on fastopen early fallback
- skbuff: fix memory corruption due to a race between skb coalescing
and releasing clones confusing page_pool reference counting
- bonding: fix neighbor solicitation validation on backup slaves
- bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp
- bpf: arm64: fixed a BTI error on returning to patched function
- openvswitch: fix race on port output leading to inf loop
- sfp: initialize sfp->i2c_block_size at sfp allocation to avoid
returning a different errno than expected
- phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove
- Bluetooth: fix printing errors if LE Connection times out
- Bluetooth: assorted UaF, deadlock and data race fixes
- eth: macb: fix memory corruption in extended buffer descriptor mode
Misc:
- adjust the XDP Rx flow hash API to also include the protocol layers
over which the hash was computed"
* tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
xdp: rss hash types representation
selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters
skbuff: Fix a race between coalescing and releasing SKBs
net: macb: fix a memory corruption in extended buffer descriptor mode
selftests: add the missing CONFIG_IP_SCTP in net config
udp6: fix potential access to stale information
selftests: openvswitch: adjust datapath NL message declaration
selftests: mptcp: userspace pm: uniform verify events
mptcp: fix NULL pointer dereference on fastopen early fallback
mptcp: stricter state check in mptcp_worker
mptcp: use mptcp_schedule_work instead of open-coding it
net: enetc: workaround for unresponsive pMAC after receiving express traffic
sctp: fix a potential overflow in sctp_ifwdtsn_skip
net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
rtnetlink: Restore RTM_NEW/DELLINK notification behavior
net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
...
The RSS hash type specifies what portion of packet data NIC hardware used
when calculating RSS hash value. The RSS types are focused on Internet
traffic protocols at OSI layers L3 and L4. L2 (e.g. ARP) often get hash
value zero and no RSS type. For L3 focused on IPv4 vs. IPv6, and L4
primarily TCP vs UDP, but some hardware supports SCTP.
Hardware RSS types are differently encoded for each hardware NIC. Most
hardware represent RSS hash type as a number. Determining L3 vs L4 often
requires a mapping table as there often isn't a pattern or sorting
according to ISO layer.
The patch introduce a XDP RSS hash type (enum xdp_rss_hash_type) that
contains both BITs for the L3/L4 types, and combinations to be used by
drivers for their mapping tables. The enum xdp_rss_type_bits get exposed
to BPF via BTF, and it is up to the BPF-programmer to match using these
defines.
This proposal change the kfunc API bpf_xdp_metadata_rx_hash() adding
a pointer value argument for provide the RSS hash type.
Change signature for all xmo_rx_hash calls in drivers to make it compile.
The RSS type implementations for each driver comes as separate patches.
Fixes: 3d76a4d3d4 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132892042.340624.582563003880565460.stgit@firesoul
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 1effe8ca4e ("skbuff: fix coalescing for page_pool fragment
recycling") allowed coalescing to proceed with non page pool page and page
pool page when @from is cloned, i.e.
to->pp_recycle --> false
from->pp_recycle --> true
skb_cloned(from) --> true
However, it actually requires skb_cloned(@from) to hold true until
coalescing finishes in this situation. If the other cloned SKB is
released while the merging is in process, from_shinfo->nr_frags will be
set to 0 toward the end of the function, causing the increment of frag
page _refcount to be unexpectedly skipped resulting in inconsistent
reference counts. Later when SKB(@to) is released, it frees the page
directly even though the page pool page is still in use, leading to
use-after-free or double-free errors. So it should be prohibited.
The double-free error message below prompted us to investigate:
BUG: Bad page state in process swapper/1 pfn:0e0d1
page:00000000c6548b28 refcount:-1 mapcount:0 mapping:0000000000000000
index:0x2 pfn:0xe0d1
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffffff00000101 0000000000000000
raw: 0000000000000002 0000000000000000 ffffffffffffffff 0000000000000000
page dumped because: nonzero _refcount
CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 6.2.0+
Call Trace:
<IRQ>
dump_stack_lvl+0x32/0x50
bad_page+0x69/0xf0
free_pcp_prepare+0x260/0x2f0
free_unref_page+0x20/0x1c0
skb_release_data+0x10b/0x1a0
napi_consume_skb+0x56/0x150
net_rx_action+0xf0/0x350
? __napi_schedule+0x79/0x90
__do_softirq+0xc8/0x2b1
__irq_exit_rcu+0xb9/0xf0
common_interrupt+0x82/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:default_idle+0xb/0x20
Fixes: 53e0961da1 ("page_pool: add frag page recycling support in page pool")
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230413090353.14448-1-liangchen.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lena wang reported an issue caused by udpv6_sendmsg()
mangling msg->msg_name and msg->msg_namelen, which
are later read from ____sys_sendmsg() :
/*
* If this is sendmmsg() and sending to current destination address was
* successful, remember it.
*/
if (used_address && err >= 0) {
used_address->name_len = msg_sys->msg_namelen;
if (msg_sys->msg_name)
memcpy(&used_address->name, msg_sys->msg_name,
used_address->name_len);
}
udpv6_sendmsg() wants to pretend the remote address family
is AF_INET in order to call udp_sendmsg().
A fix would be to modify the address in-place, instead
of using a local variable, but this could have other side effects.
Instead, restore initial values before we return from udpv6_sendmsg().
Fixes: c71d8ebe7a ("net: Fix security_socket_sendmsg() bypass problem.")
Reported-by: lena wang <lena.wang@mediatek.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230412130308.1202254-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of early fallback to TCP, subflow_syn_recv_sock() deletes
the subflow context before returning the newly allocated sock to
the caller.
The fastopen path does not cope with the above unconditionally
dereferencing the subflow context.
Fixes: 36b122baf6 ("mptcp: add subflow_v(4,6)_send_synack()")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Beyond reducing code duplication this also avoids scheduling
the mptcp_worker on a closed socket on some edge scenarios.
The addressed issue is actually older than the blamed commit
below, but this fix needs it as a pre-requisite.
Fixes: ba8f48f7a4 ("mptcp: introduce mptcp_schedule_work")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers like iwlwifi might have per-STA queues, so we
may want to flush/drop just those queues rather than all
when removing a station. Add a separate method for that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we remove a station, we first make it unreachable,
then we (must) remove its keys, and then remove the
station itself. Depending on the hardware design, if
we have hardware crypto at all, frames still sitting
on hardware queues may then be transmitted without a
valid key, possibly unencrypted or with a fixed key.
Fix this by flushing the queues when removing stations
so this cannot happen.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The checks of whether or not a frame is bufferable were not
taking into account that some action frames aren't, such as
FTM. Check this, which requires some changes to the function
ieee80211_is_bufferable_mmpdu() since we need the whole skb
for the checks now.
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The usage_data[] array in rfc6803_encrypt_case() is uninitialised, so clear
it as it may cause the tests to fail otherwise.
Fixes: b958cff6b2 ("SUNRPC: Add encryption KUnit tests for the RFC 6803 encryption types")
Link: https://lore.kernel.org/r/380323.1681314997@warthog.procyon.org.uk/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Scott Mayhew <smayhew@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Remove redundant (base_addr >= pool->addrs_cnt) comparison from the
conditional.
In particular, addr is computed as:
addr = base_addr + offset
... where base_addr and offset are stored as 48-bit and 16-bit unsigned
integers, respectively. The above sum cannot overflow u64 since base_addr
has a maximum value of 0x0000ffffffffffff and offset has a maximum value
of 0xffff (implying a maximum sum of 0x000100000000fffe). Since overflow
is impossible, it follows that addr >= base_addr.
Now if (base_addr >= pool->addrs_cnt), then clearly:
addr >= base_addr
>= pool->addrs_cnt
Thus, (base_addr >= pool->addrs_cnt) implies (addr >= pool->addrs_cnt).
Subsequently, the former comparison is unnecessary in the conditional
since for any boolean expressions A and B, (A || B) && (A -> B) is
equivalent to B.
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230411130025.19704-1-kal.conley@dectris.com
Perform the chunk boundary check like the page boundary check in
xp_desc_crosses_non_contig_pg(). This simplifies the implementation and
reduces the number of branches.
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230410121841.643254-1-kal.conley@dectris.com
Currently, when traversing ifwdtsn skips with _sctp_walk_ifwdtsn, it only
checks the pos against the end of the chunk. However, the data left for
the last pos may be < sizeof(struct sctp_ifwdtsn_skip), and dereference
it as struct sctp_ifwdtsn_skip may cause coverflow.
This patch fixes it by checking the pos against "the end of the chunk -
sizeof(struct sctp_ifwdtsn_skip)" in sctp_ifwdtsn_skip, similar to
sctp_fwdtsn_skip.
Fixes: 0fc2ea922c ("sctp: implement validate_ftsn for sctp_stream_interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/2a71bffcd80b4f2c61fac6d344bb2f11c8fd74f7.1681155810.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The commits referenced below allows userspace to use the NLM_F_ECHO flag
for RTM_NEW/DELLINK operations to receive unicast notifications for the
affected link. Prior to these changes, applications may have relied on
multicast notifications to learn the same information without specifying
the NLM_F_ECHO flag.
For such applications, the mentioned commits changed the behavior for
requests not using NLM_F_ECHO. Multicast notifications are still received,
but now use the portid of the requester and the sequence number of the
request instead of zero values used previously. For the application, this
message may be unexpected and likely handled as a response to the
NLM_F_ACKed request, especially if it uses the same socket to handle
requests and notifications.
To fix existing applications relying on the old notification behavior,
set the portid and sequence number in the notification only if the
request included the NLM_F_ECHO flag. This restores the old behavior
for applications not using it, but allows unicasted notifications for
others.
Fixes: f3a63cce1b ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_delete_link")
Fixes: d88e136cab ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_newlink_create")
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230411074319.24133-1-martin@strongswan.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add two new kfuncs that allow a BPF tc-hook, installed on an ipip
device in collect-metadata mode, to control FOU encap parameters on a
per-packet level. The set of kfuncs is registered with the fou module.
The bpf_skb_set_fou_encap kfunc is supposed to be used in tandem and after
a successful call to the bpf_skb_set_tunnel_key bpf-helper. UDP source and
destination ports can be controlled by passing a struct bpf_fou_encap. A
source port of zero will auto-assign a source port. enum bpf_fou_encap_type
is used to specify if the egress path should FOU or GUE encap the packet.
On the ingress path bpf_skb_get_fou_encap can be used to read UDP source
and destination ports from the receiver's point of view and allows for
packet multiplexing across different destination ports within a single
BPF program and ipip device.
Signed-off-by: Christian Ehrig <cehrig@cloudflare.com>
Link: https://lore.kernel.org/r/e17c94a646b63e78ce0dbf3f04b2c33dc948a32d.1680874078.git.cehrig@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Today ipip devices in collect-metadata mode don't allow for sending FOU
or GUE encapsulated packets. This patch lifts the restriction by adding
a struct ip_tunnel_encap to the tunnel metadata.
On the egress path, the members of this struct can be set by the
bpf_skb_set_fou_encap kfunc via a BPF tc-hook. Instead of dropping packets
wishing to use additional UDP encapsulation, ip_md_tunnel_xmit now
evaluates the contents of this struct and adds the corresponding FOU or
GUE header. Furthermore, it is making sure that additional header bytes
are taken into account for PMTU discovery.
On the ingress path, an ipip device in collect-metadata mode will fill this
struct and a BPF tc-hook can obtain the information via a call to the
bpf_skb_get_fou_encap kfunc.
The minor change to ip_tunnel_encap, which now takes a pointer to
struct ip_tunnel_encap instead of struct ip_tunnel, allows us to control
FOU encap type and parameters on a per packet-level.
Signed-off-by: Christian Ehrig <cehrig@cloudflare.com>
Link: https://lore.kernel.org/r/cfea47de655d0f870248abf725932f851b53960a.1680874078.git.cehrig@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When huang uses sched_switch tracepoint, the tracepoint
does only one thing in the mounted ebpf program, which
deletes the fixed elements in sockhash ([0])
It seems that elements in sockhash are rarely actively
deleted by users or ebpf program. Therefore, we do not
pay much attention to their deletion. Compared with hash
maps, sockhash only provides spin_lock_bh protection.
This causes it to appear to have self-locking behavior
in the interrupt context.
[0]:https://lore.kernel.org/all/CABcoxUayum5oOqFMMqAeWuS8+EzojquSOSyDA3J_2omY=2EeAg@mail.gmail.com/
Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Xin Liu <liuxin350@huawei.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230406122622.109978-1-liuxin350@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With Eric's ref tracker, syzbot finally found a repro for
use-after-free in tcp_write_timer_handler() by kernel TCP
sockets. [0]
If SMC creates a kernel socket in __smc_create(), the kernel
socket is supposed to be freed in smc_clcsock_release() by
calling sock_release() when we close() the parent SMC socket.
However, at the end of smc_clcsock_release(), the kernel
socket's sk_state might not be TCP_CLOSE. This means that
we have not called inet_csk_destroy_sock() in __tcp_close()
and have not stopped the TCP timers.
The kernel socket's TCP timers can be fired later, so we
need to hold a refcnt for net as we do for MPTCP subflows
in mptcp_subflow_create_socket().
[0]:
leaked reference.
sk_alloc (./include/net/net_namespace.h:335 net/core/sock.c:2108)
inet_create (net/ipv4/af_inet.c:319 net/ipv4/af_inet.c:244)
__sock_create (net/socket.c:1546)
smc_create (net/smc/af_smc.c:3269 net/smc/af_smc.c:3284)
__sock_create (net/socket.c:1546)
__sys_socket (net/socket.c:1634 net/socket.c:1618 net/socket.c:1661)
__x64_sys_socket (net/socket.c:1672)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
==================================================================
BUG: KASAN: slab-use-after-free in tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594)
Read of size 1 at addr ffff888052b65e0d by task syzrepro/18091
CPU: 0 PID: 18091 Comm: syzrepro Tainted: G W 6.3.0-rc4-01174-gb5d54eb5899a #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:107)
print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
kasan_report (mm/kasan/report.c:538)
tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594)
tcp_write_timer (./include/linux/spinlock.h:390 net/ipv4/tcp_timer.c:643)
call_timer_fn (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/timer.h:127 kernel/time/timer.c:1701)
__run_timers.part.0 (kernel/time/timer.c:1752 kernel/time/timer.c:2022)
run_timer_softirq (kernel/time/timer.c:2037)
__do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572)
__irq_exit_rcu (kernel/softirq.c:445 kernel/softirq.c:650)
irq_exit_rcu (kernel/softirq.c:664)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1107 (discriminator 14))
</IRQ>
Fixes: ac7138746e ("smc: establish new socket family")
Reported-by: syzbot+7e1e1bdb852961150198@syzkaller.appspotmail.com
Link: https://lore.kernel.org/netdev/000000000000a3f51805f8bcc43a@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These are not as critical as the FDB/MDB trace points (I'm not aware of
outstanding VLAN related bugs), but maybe they are useful to somebody,
either debugging something or simply trying to learn more.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA performs non-trivial housekeeping of unicast and multicast addresses
on shared (CPU and DSA) ports, and puts a bit of pressure on higher
layers, requiring them to behave correctly (remove these addresses
exactly as many times as they were added). Otherwise, either addresses
linger around forever, or DSA returns -ENOENT complaining that entries
that were already deleted must be deleted again.
To aid debugging, introduce some trace points specifically for FDB and
MDB - that's where some of the bugs still are right now.
Some bugs I have seen were also due to race conditions, see:
- 630fd4822a ("net: dsa: flush switchdev workqueue on bridge join error path")
- a2614140dc ("net: dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN")
so it would be good to not disturb the timing too much, hence the choice
to use trace points vs regular dev_dbg().
I've had these for some time on my computer in a less polished form, and
they've proven useful. What I found most useful was to enable
CONFIG_BOOTTIME_TRACING, add "trace_event=dsa" to the kernel cmdline,
and run "cat /sys/kernel/debug/tracing/trace". This is to debug more
complex environments with network managers started by the init system,
things like that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix not setting Dath Path for broadcast sink
- Fix not cleaning up on LE Connection failure
- SCO: Fix possible circular locking dependency
- L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}
- Fix race condition in hidp_session_thread
- btbcm: Fix logic error in forming the board name
- btbcm: Fix use after free in btsdio_remove
-----BEGIN PGP SIGNATURE-----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=Ag/P
-----END PGP SIGNATURE-----
Merge tag 'for-net-2023-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix not setting Dath Path for broadcast sink
- Fix not cleaning up on LE Connection failure
- SCO: Fix possible circular locking dependency
- L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}
- Fix race condition in hidp_session_thread
- btbcm: Fix logic error in forming the board name
- btbcm: Fix use after free in btsdio_remove
* tag 'for-net-2023-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}
Bluetooth: Set ISO Data Path on broadcast sink
Bluetooth: hci_conn: Fix possible UAF
Bluetooth: SCO: Fix possible circular locking dependency sco_sock_getsockopt
Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm
bluetooth: btbcm: Fix logic error in forming the board name.
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
Bluetooth: Fix race condition in hidp_session_thread
Bluetooth: Fix printing errors if LE Connection times out
Bluetooth: hci_conn: Fix not cleaning up on LE Connection failure
====================
Link: https://lore.kernel.org/r/20230410172718.4067798-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding verifier test for accessing u32 pointer argument in
tracing programs.
The test program loads 1nd argument of bpf_fentry_test9 function
which is u32 pointer and checks that verifier allows that.
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230410085908.98493-3-zhoufeng.zf@bytedance.com
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
No need to do a forward declaration for sunrpc_table, just move
the sysctls up as everyone else does it. This will make the next
change easier to read. This change produces no functional changes.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
passed our 9p regression tests and been in for-next for at least a week.
They include a fix for a KASAN reported problem in the extended attribute
handling code and a use after free in the xen transport. It also includes
some updates for the MAINTAINERS file including the transition of our
development mailing list from sourceforge.net to lists.linux.dev.
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T8wk
-----END PGP SIGNATURE-----
Merge tag '9p-6.3-fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p fixes from Eric Van Hensbergen:
"These are some collected fixes for the 6.3-rc series that have been
passed our 9p regression tests and been in for-next for at least a
week.
They include a fix for a KASAN reported problem in the extended
attribute handling code and a use after free in the xen transport.
This also includes some updates for the MAINTAINERS file including the
transition of our development mailing list from sourceforge.net to
lists.linux.dev"
* tag '9p-6.3-fixes-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
Update email address and mailing list for v9fs
9p/xen : Fix use after free bug in xen_9pfs_front_remove due to race condition
9P FS: Fix wild-memory-access write in v9fs_get_acl
Similar to commit d0be8347c6 ("Bluetooth: L2CAP: Fix use-after-free
caused by l2cap_chan_put"), just use l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.
Cc: stable@kernel.org
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
This patch enables ISO data rx on broadcast sink.
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is a potential race condition in hidp_session_thread that may
lead to use-after-free. For instance, the timer is active while
hidp_del_timer is called in hidp_session_thread(). After hidp_session_put,
then 'session' will be freed, causing kernel panic when hidp_idle_timeout
is running.
The solution is to use del_timer_sync instead of del_timer.
Here is the call trace:
? hidp_session_probe+0x780/0x780
call_timer_fn+0x2d/0x1e0
__run_timers.part.0+0x569/0x940
hidp_session_probe+0x780/0x780
call_timer_fn+0x1e0/0x1e0
ktime_get+0x5c/0xf0
lapic_next_deadline+0x2c/0x40
clockevents_program_event+0x205/0x320
run_timer_softirq+0xa9/0x1b0
__do_softirq+0x1b9/0x641
__irq_exit_rcu+0xdc/0x190
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0xa1/0xc0
Cc: stable@vger.kernel.org
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes errors like bellow when LE Connection times out since that
is actually not a controller error:
Bluetooth: hci0: Opcode 0x200d failed: -110
Bluetooth: hci0: request failed to create LE connection: err -110
Instead the code shall properly detect if -ETIMEDOUT is returned and
send HCI_OP_LE_CREATE_CONN_CANCEL to give up on the connection.
Link: https://github.com/bluez/bluez/issues/340
Fixes: 8e8b92ee60 ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_connect_le_scan_cleanup shall always be invoked to cleanup the
states and re-enable passive scanning if necessary, otherwise it may
cause the pending action to stay active causing multiple attempts to
connect.
Fixes: 9b3628d79b ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There was a sort of rush surrounding commit 88c0a6b503 ("net: create a
netdev notifier for DSA to reject PTP on DSA master"), due to a desire
to convert DSA's attempt to deny TX timestamping on a DSA master to
something that doesn't block the kernel-wide API conversion from
ndo_eth_ioctl() to ndo_hwtstamp_set().
What was required was a mechanism that did not depend on ndo_eth_ioctl(),
and what was provided was a mechanism that did not depend on
ndo_eth_ioctl(), while at the same time introducing something that
wasn't absolutely necessary - a new netdev notifier.
There have been objections from Jakub Kicinski that using notifiers in
general when they are not absolutely necessary creates complications to
the control flow and difficulties to maintainers who look at the code.
So there is a desire to not use notifiers.
In addition to that, the notifier chain gets called even if there is no
DSA in the system and no one is interested in applying any restriction.
Take the model of udp_tunnel_nic_ops and introduce a stub mechanism,
through which net/core/dev_ioctl.c can call into DSA even when
CONFIG_NET_DSA=m.
Compared to the code that existed prior to the notifier conversion, aka
what was added in commits:
- 4cfab35667 ("net: dsa: Add wrappers for overloaded ndo_ops")
- 3369afba1e ("net: Call into DSA netdevice_ops wrappers")
this is different because we are not overloading any struct
net_device_ops of the DSA master anymore, but rather, we are exposing a
rather specific functionality which is orthogonal to which API is used
to enable it - ndo_eth_ioctl() or ndo_hwtstamp_set().
Also, what is similar is that both approaches use function pointers to
get from built-in code to DSA.
There is no point in replicating the function pointers towards
__dsa_master_hwtstamp_validate() once for every CPU port (dev->dsa_ptr).
Instead, it is sufficient to introduce a singleton struct dsa_stubs,
built into the kernel, which contains a single function pointer to
__dsa_master_hwtstamp_validate().
I find this approach preferable to what we had originally, because
dev->dsa_ptr->netdev_ops->ndo_do_ioctl() used to require going through
struct dsa_port (dev->dsa_ptr), and so, this was incompatible with any
attempts to add any data encapsulation and hide DSA data structures from
the outside world.
Link: https://lore.kernel.org/netdev/20230403083019.120b72fd@kernel.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 217f697436 ("net: busy-poll: allow preemption
in sk_busy_loop()"), a thread willing to use busy polling
is not hurting other threads anymore in a non preempt kernel.
I think it is safe to remove CAP_NET_ADMIN check.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230406194634.1804691-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This series overcomes existing hardware limitations in Mellanox ConnectX
devices around handling IPsec soft and hard limits.
In addition, the ESN logic is tied and added an interface to configure
replay window sequence numbers through existing iproute2 interface.
ip xfrm state ... [ replay-seq SEQ ] [ replay-oseq SEQ ]
[ replay-seq-hi SEQ ] [ replay-oseq-hi SEQ ]
Link: https://lore.kernel.org/all/cover.1680162300.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQT1m3YD37UfMCUQBNwp8NhrnBAZsQUCZC5w+AAKCRAp8NhrnBAZ
se8OAPoDy7ILgh6wpdnUZMpXmSCnA5MPp6mWrDWPc8fOHFL7jwEA33RReSMZJe35
lvHlrITxl0nWPPxY7gSWJA0RuxnRqQw=
=Nv32
-----END PGP SIGNATURE-----
Merge tag 'ipsec-esn-replay' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Leon Romanovsky says:
====================
Improve IPsec limits, ESN and replay window
This series overcomes existing hardware limitations in Mellanox ConnectX
devices around handling IPsec soft and hard limits.
In addition, the ESN logic is tied and added an interface to configure
replay window sequence numbers through existing iproute2 interface.
ip xfrm state ... [ replay-seq SEQ ] [ replay-oseq SEQ ]
[ replay-seq-hi SEQ ] [ replay-oseq-hi SEQ ]
Link: https://lore.kernel.org/all/cover.1680162300.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
* tag 'ipsec-esn-replay' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5e: Simulate missing IPsec TX limits hardware functionality
net/mlx5e: Generalize IPsec work structs
net/mlx5e: Reduce contention in IPsec workqueue
net/mlx5e: Set IPsec replay sequence numbers
net/mlx5e: Remove ESN callbacks if it is not supported
xfrm: don't require advance ESN callback for packet offload
net/mlx5e: Overcome slow response for first IPsec ASO WQE
net/mlx5e: Add SW implementation to support IPsec 64 bit soft and hard limits
net/mlx5e: Prevent zero IPsec soft/hard limits
net/mlx5e: Factor out IPsec ASO update function
====================
Link: https://lore.kernel.org/r/20230406071902.712388-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
assume the following setup on a single machine:
1. An openvswitch instance with one bridge and default flows
2. two network namespaces "server" and "client"
3. two ovs interfaces "server" and "client" on the bridge
4. for each ovs interface a veth pair with a matching name and 32 rx and
tx queues
5. move the ends of the veth pairs to the respective network namespaces
6. assign ip addresses to each of the veth ends in the namespaces (needs
to be the same subnet)
7. start some http server on the server network namespace
8. test if a client in the client namespace can reach the http server
when following the actions below the host has a chance of getting a cpu
stuck in a infinite loop:
1. send a large amount of parallel requests to the http server (around
3000 curls should work)
2. in parallel delete the network namespace (do not delete interfaces or
stop the server, just kill the namespace)
there is a low chance that this will cause the below kernel cpu stuck
message. If this does not happen just retry.
Below there is also the output of bpftrace for the functions mentioned
in the output.
The series of events happening here is:
1. the network namespace is deleted calling
`unregister_netdevice_many_notify` somewhere in the process
2. this sets first `NETREG_UNREGISTERING` on both ends of the veth and
then runs `synchronize_net`
3. it then calls `call_netdevice_notifiers` with `NETDEV_UNREGISTER`
4. this is then handled by `dp_device_event` which calls
`ovs_netdev_detach_dev` (if a vport is found, which is the case for
the veth interface attached to ovs)
5. this removes the rx_handlers of the device but does not prevent
packages to be sent to the device
6. `dp_device_event` then queues the vport deletion to work in
background as a ovs_lock is needed that we do not hold in the
unregistration path
7. `unregister_netdevice_many_notify` continues to call
`netdev_unregister_kobject` which sets `real_num_tx_queues` to 0
8. port deletion continues (but details are not relevant for this issue)
9. at some future point the background task deletes the vport
If after 7. but before 9. a packet is send to the ovs vport (which is
not deleted at this point in time) which forwards it to the
`dev_queue_xmit` flow even though the device is unregistering.
In `skb_tx_hash` (which is called in the `dev_queue_xmit`) path there is
a while loop (if the packet has a rx_queue recorded) that is infinite if
`dev->real_num_tx_queues` is zero.
To prevent this from happening we update `do_output` to handle devices
without carrier the same as if the device is not found (which would
be the code path after 9. is done).
Additionally we now produce a warning in `skb_tx_hash` if we will hit
the infinite loop.
bpftrace (first word is function name):
__dev_queue_xmit server: real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 2, reg_state: 1
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 6, reg_state: 2
ovs_netdev_detach_dev server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, reg_state: 2
netdev_rx_handler_unregister server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
netdev_rx_handler_unregister ret server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 27, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 22, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 18, reg_state: 2
netdev_unregister_kobject: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
ovs_vport_send server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
__dev_queue_xmit server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
broken device server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024
ovs_dp_detach_port server: real_num_tx_queues: 0 cpu 9, pid: 9124, tid: 9124, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 33604, tid: 33604
stuck message:
watchdog: BUG: soft lockup - CPU#5 stuck for 26s! [curl:1929279]
Modules linked in: veth pktgen bridge stp llc ip_set_hash_net nft_counter xt_set nft_compat nf_tables ip_set_hash_ip ip_set nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 tls binfmt_misc nls_iso8859_1 input_leds joydev serio_raw dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua sch_fq_codel drm efi_pstore virtio_rng ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel virtio_net ahci net_failover crypto_simd cryptd psmouse libahci virtio_blk failover
CPU: 5 PID: 1929279 Comm: curl Not tainted 5.15.0-67-generic #74-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:netdev_pick_tx+0xf1/0x320
Code: 00 00 8d 48 ff 0f b7 c1 66 39 ca 0f 86 e9 01 00 00 45 0f b7 ff 41 39 c7 0f 87 5b 01 00 00 44 29 f8 41 39 c7 0f 87 4f 01 00 00 <eb> f2 0f 1f 44 00 00 49 8b 94 24 28 04 00 00 48 85 d2 0f 84 53 01
RSP: 0018:ffffb78b40298820 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff9c8773adc2e0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: ffff9c8773adc2e0 RDI: ffff9c870a25e000
RBP: ffffb78b40298858 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9c870a25e000
R13: ffff9c870a25e000 R14: ffff9c87fe043480 R15: 0000000000000000
FS: 00007f7b80008f00(0000) GS:ffff9c8e5f740000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7b80f6a0b0 CR3: 0000000329d66000 CR4: 0000000000350ee0
Call Trace:
<IRQ>
netdev_core_pick_tx+0xa4/0xb0
__dev_queue_xmit+0xf8/0x510
? __bpf_prog_exit+0x1e/0x30
dev_queue_xmit+0x10/0x20
ovs_vport_send+0xad/0x170 [openvswitch]
do_output+0x59/0x180 [openvswitch]
do_execute_actions+0xa80/0xaa0 [openvswitch]
? kfree+0x1/0x250
? kfree+0x1/0x250
? kprobe_perf_func+0x4f/0x2b0
? flow_lookup.constprop.0+0x5c/0x110 [openvswitch]
ovs_execute_actions+0x4c/0x120 [openvswitch]
ovs_dp_process_packet+0xa1/0x200 [openvswitch]
? ovs_ct_update_key.isra.0+0xa8/0x120 [openvswitch]
? ovs_ct_fill_key+0x1d/0x30 [openvswitch]
? ovs_flow_key_extract+0x2db/0x350 [openvswitch]
ovs_vport_receive+0x77/0xd0 [openvswitch]
? __htab_map_lookup_elem+0x4e/0x60
? bpf_prog_680e8aff8547aec1_kfree+0x3b/0x714
? trace_call_bpf+0xc8/0x150
? kfree+0x1/0x250
? kfree+0x1/0x250
? kprobe_perf_func+0x4f/0x2b0
? kprobe_perf_func+0x4f/0x2b0
? __mod_memcg_lruvec_state+0x63/0xe0
netdev_port_receive+0xc4/0x180 [openvswitch]
? netdev_port_receive+0x180/0x180 [openvswitch]
netdev_frame_hook+0x1f/0x40 [openvswitch]
__netif_receive_skb_core.constprop.0+0x23d/0xf00
__netif_receive_skb_one_core+0x3f/0xa0
__netif_receive_skb+0x15/0x60
process_backlog+0x9e/0x170
__napi_poll+0x33/0x180
net_rx_action+0x126/0x280
? ttwu_do_activate+0x72/0xf0
__do_softirq+0xd9/0x2e7
? rcu_report_exp_cpu_mult+0x1b0/0x1b0
do_softirq+0x7d/0xb0
</IRQ>
<TASK>
__local_bh_enable_ip+0x54/0x60
ip_finish_output2+0x191/0x460
__ip_finish_output+0xb7/0x180
ip_finish_output+0x2e/0xc0
ip_output+0x78/0x100
? __ip_finish_output+0x180/0x180
ip_local_out+0x5e/0x70
__ip_queue_xmit+0x184/0x440
? tcp_syn_options+0x1f9/0x300
ip_queue_xmit+0x15/0x20
__tcp_transmit_skb+0x910/0x9c0
? __mod_memcg_state+0x44/0xa0
tcp_connect+0x437/0x4e0
? ktime_get_with_offset+0x60/0xf0
tcp_v4_connect+0x436/0x530
__inet_stream_connect+0xd4/0x3a0
? kprobe_perf_func+0x4f/0x2b0
? aa_sk_perm+0x43/0x1c0
inet_stream_connect+0x3b/0x60
__sys_connect_file+0x63/0x70
__sys_connect+0xa6/0xd0
? setfl+0x108/0x170
? do_fcntl+0xe8/0x5a0
__x64_sys_connect+0x18/0x20
do_syscall_64+0x5c/0xc0
? __x64_sys_fcntl+0xa9/0xd0
? exit_to_user_mode_prepare+0x37/0xb0
? syscall_exit_to_user_mode+0x27/0x50
? do_syscall_64+0x69/0xc0
? __sys_setsockopt+0xea/0x1e0
? exit_to_user_mode_prepare+0x37/0xb0
? syscall_exit_to_user_mode+0x27/0x50
? __x64_sys_setsockopt+0x1f/0x30
? do_syscall_64+0x69/0xc0
? irqentry_exit+0x1d/0x30
? exc_page_fault+0x89/0x170
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7f7b8101c6a7
Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 18 89 54 24 0c 48 89 34 24 89
RSP: 002b:00007ffffd6b2198 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b8101c6a7
RDX: 0000000000000010 RSI: 00007ffffd6b2360 RDI: 0000000000000005
RBP: 0000561f1370d560 R08: 00002795ad21d1ac R09: 0030312e302e302e
R10: 00007ffffd73f080 R11: 0000000000000246 R12: 0000561f1370c410
R13: 0000000000000000 R14: 0000000000000005 R15: 0000000000000000
</TASK>
Fixes: 7f8a436eaa ("openvswitch: Add conntrack action")
Co-developed-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZC0pBXBAgh7c76CA@kernel-bug-kernel-bug
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZDCaHgAKCRDbK58LschI
g2CXAP9sgjqCaRhfSSYWbESKWxokJAa1j6v7phNjR9iqHrBjzwEAg6aDHOUqcYpD
Zlp/5JV9HIkc1wTmuIUuI74YAVZBJAU=
=V2jo
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-04-08
We've added 4 non-merge commits during the last 11 day(s) which contain
a total of 5 files changed, 39 insertions(+), 6 deletions(-).
The main changes are:
1) Fix BPF TCP socket iterator to use correct helper for dropping
socket's refcount, that is, sock_gen_put instead of sock_put,
from Martin KaFai Lau.
2) Fix a BTI exception splat in BPF trampoline-generated code on arm64,
from Xu Kuohai.
3) Fix a LongArch JIT error from missing BPF_NOSPEC no-op, from George Guo.
4) Fix dynamic XDP feature detection of veth in xdp_redirect selftest,
from Lorenzo Bianconi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: fix xdp_redirect xdp-features selftest for veth driver
bpf, arm64: Fixed a BTI error on returning to patched function
LoongArch, bpf: Fix jit to skip speculation barrier opcode
bpf: tcp: Use sock_gen_put instead of sock_put in bpf_iter_tcp
====================
Link: https://lore.kernel.org/r/20230407224642.30906-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UBSAN: shift-out-of-bounds in net/ipv4/tcp_input.c:555:23
shift exponent 255 is too large for 32-bit type 'int'
CPU: 1 PID: 7907 Comm: ssh Not tainted 6.3.0-rc4-00161-g62bad54b26db-dirty #206
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x136/0x150
__ubsan_handle_shift_out_of_bounds+0x21f/0x5a0
tcp_init_transfer.cold+0x3a/0xb9
tcp_finish_connect+0x1d0/0x620
tcp_rcv_state_process+0xd78/0x4d60
tcp_v4_do_rcv+0x33d/0x9d0
__release_sock+0x133/0x3b0
release_sock+0x58/0x1b0
'maxwin' is int, shifting int for 32 or more bits is undefined behaviour.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current release - regressions:
- wifi: mac80211:
- fix potential null pointer dereference
- fix receiving mesh packets in forwarding=0 networks
- fix mesh forwarding
Current release - new code bugs:
- virtio/vsock: fix leaks due to missing skb owner
Previous releases - regressions:
- raw: fix NULL deref in raw_get_next().
- sctp: check send stream number after wait_for_sndbuf
- qrtr:
- fix a refcount bug in qrtr_recvmsg()
- do not do DEL_SERVER broadcast after DEL_CLIENT
- wifi: brcmfmac: fix SDIO suspend/resume regression
- wifi: mt76: fix use-after-free in fw features query.
- can: fix race between isotp_sendsmg() and isotp_release()
- eth: mtk_eth_soc: fix remaining throughput regression
-eth: ice: reset FDIR counter in FDIR init stage
Previous releases - always broken:
- core: don't let netpoll invoke NAPI if in xmit context
- icmp: guard against too small mtu
- ipv6: fix an uninit variable access bug in __ip6_make_skb()
- wifi: mac80211: fix the size calculation of ieee80211_ie_len_eht_cap()
- can: fix poll() to not report false EPOLLOUT events
- eth: gve: secure enough bytes in the first TX desc for all TCP pkts
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=1AWK
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and can.
Current release - regressions:
- wifi: mac80211:
- fix potential null pointer dereference
- fix receiving mesh packets in forwarding=0 networks
- fix mesh forwarding
Current release - new code bugs:
- virtio/vsock: fix leaks due to missing skb owner
Previous releases - regressions:
- raw: fix NULL deref in raw_get_next().
- sctp: check send stream number after wait_for_sndbuf
- qrtr:
- fix a refcount bug in qrtr_recvmsg()
- do not do DEL_SERVER broadcast after DEL_CLIENT
- wifi: brcmfmac: fix SDIO suspend/resume regression
- wifi: mt76: fix use-after-free in fw features query.
- can: fix race between isotp_sendsmg() and isotp_release()
- eth: mtk_eth_soc: fix remaining throughput regression
- eth: ice: reset FDIR counter in FDIR init stage
Previous releases - always broken:
- core: don't let netpoll invoke NAPI if in xmit context
- icmp: guard against too small mtu
- ipv6: fix an uninit variable access bug in __ip6_make_skb()
- wifi: mac80211: fix the size calculation of
ieee80211_ie_len_eht_cap()
- can: fix poll() to not report false EPOLLOUT events
- eth: gve: secure enough bytes in the first TX desc for all TCP
pkts"
* tag 'net-6.3-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: stmmac: check fwnode for phy device before scanning for phy
net: stmmac: Add queue reset into stmmac_xdp_open() function
selftests: net: rps_default_mask.sh: delete veth link specifically
net: fec: make use of MDIO C45 quirk
can: isotp: fix race between isotp_sendsmg() and isotp_release()
can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events
can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos
can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access
gve: Secure enough bytes in the first TX desc for all TCP pkts
netlink: annotate lockless accesses to nlk->max_recvmsg_len
ethtool: reset #lanes when lanes is omitted
ping: Fix potentail NULL deref for /proc/net/icmp.
raw: Fix NULL deref in raw_get_next().
ice: Reset FDIR counter in FDIR init stage
ice: fix wrong fallback logic for FDIR
net: stmmac: fix up RX flow hash indirection table when setting channels
net: ethernet: ti: am65-cpsw: Fix mdio cleanup in probe
wifi: mt76: ignore key disable commands
wifi: ath11k: reduce the MHI timeout to 20s
ipv6: Fix an uninit variable access bug in __ip6_make_skb()
...
With linux/acpi.h no longer implicitly including of.h, add an explicit
include of of.h to fix the following error:
net/rfkill/rfkill-gpio.c:181:21: error: implicit declaration of function 'of_match_ptr' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make sure unaligned descriptors that straddle the end of the UMEM are
considered invalid. Currently, descriptor validation is broken for
zero-copy mode which only checks descriptors at page granularity.
For example, descriptors in zero-copy mode that overrun the end of the
UMEM but not a page boundary are (incorrectly) considered valid. The
UMEM boundary check needs to happen before the page boundary and
contiguity checks in xp_desc_crosses_non_contig_pg(). Do this check in
xp_unaligned_validate_desc() instead like xp_check_unaligned() already
does.
Fixes: 2b43470add ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230405235920.7305-2-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The current code doesn't let a simple "allow" policy counteract a
default policy blocking all incoming packets:
ip x p setdefault in block
ip x p a src 192.168.2.1/32 dst 192.168.2.2/32 dir in action allow
At this stage, we have an allow policy (with or without transforms)
for this packet. It doesn't matter what the default policy says, since
the policy we looked up lets the packet through. The case of a
blocking policy is already handled separately, so we can remove this
check.
Fixes: 2d151d3907 ("xfrm: Add possibility to set the default to block if we have no policy")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
For memory alloc that store user data from nla[NFTA_OBJ_USERDATA],
use GFP_KERNEL_ACCOUNT is more suitable.
Fixes: 33758c8914 ("memcg: enable accounting for nft objects")
Signed-off-by: Chen Aotian <chenaotian2@163.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Recent attempt to ensure PREROUTING hook is executed again when a
decrypted ipsec packet received on a bridge passes through the network
stack a second time broke the physdev match in INPUT hook.
We can't discard the nf_bridge info strct from sabotage_in hook, as
this is needed by the physdev match.
Keep the struct around and handle this with another conditional instead.
Fixes: 2b272bb558 ("netfilter: br_netfilter: disable sabotage_in hook after first suppression")
Reported-and-tested-by: Farid BENAMROUCHE <fariouche@yahoo.fr>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In packet offload mode, the hardware is responsible to manage
replay window and advance ESN. In that mode, there won't any
call to .xdo_dev_state_advance_esn callback.
So relax current check for existence of that callback.
Link: https://lore.kernel.org/r/9f3dfc3fef2cfcd191f0c5eee7cf0aa74e7f7786.1680162300.git.leonro@nvidia.com
Reviewed-by: Raed Salem <raeds@nvidia.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
For the sake of readability, use the netlink payload helpers from
the 'nla_get_*()' family to parse the attributes.
tdc results:
1..5
ok 1 9903 - Add mqprio Qdisc to multi-queue device (8 queues)
ok 2 453a - Delete nonexistent mqprio Qdisc
ok 3 5292 - Delete mqprio Qdisc twice
ok 4 45a9 - Add mqprio Qdisc to single-queue device
ok 5 2ba9 - Show mqprio class
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230404203449.1627033-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Smaller pull request this time, sending this early to fix the conflict
in mac80211. Nothing really special this time, only smaller changes.
Note: We pulled wireless into wireless-next to fix a complicated
conflict in mac80211.
Major changes:
mac80211/cfg80211
* enable Wi-Fi 7 (EHT) mesh support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmQtVs0RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvtRwgAiyCCYwhxj3BXwrtr5u4X+RCAQ/8LSrpu
ju8M7DigiDVUuSX7fS99LGMOBenKLg6S4f2wtj10tKSbr0D4Qjruv6JpERDgvhIn
RDJg8QBB5urGWvI6lKf0K+xWDrpPhb3RV/yCnVQU+3t/B7sLwC2pAJJmyRJNEXaB
sLpAGcbQQizRhHp3gVzuxSmkqnX1KfxehN5f+AeL55U3Jw3+vKmk+Ekd/GXrDEk5
Q8CWcikTthsn2+CTekVNUgg2gQyL9fF1hRwuhPph8Tcxow2SYe3DX+Yj/So25tv/
4Gp+GLdMOAKuPCntOE9A8YHVbA+JLlzbfOwF6g5kgREmagwW6GoyMA==
=zsHH
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.3
Smaller pull request this time, sending this early to fix the conflict
in mac80211. Nothing really special this time, only smaller changes.
* enable Wi-Fi 7 (EHT) mesh support
* tag 'wireless-next-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (37 commits)
wifi: rt2x00: Fix memory leak when handling surveys
wifi: b43legacy: Remove the unused function prev_slot()
wifi: rtw89: Remove redundant pci_clear_master
wifi: rtw89: fix potential race condition between napi_init and napi_enable
wifi: rtw89: config EDCCA threshold during scan to prevent TX failed
wifi: rtw89: fix incorrect channel info during scan due to ppdu_sts filtering
wifi: rtw89: remove superfluous H2C of join_info
wifi: rtw89: set data lowest rate according to AP supported rate
wifi: rtw89: add counters of register-based H2C/C2H
wifi: rtw89: coex: Update Wi-Fi Bluetooth coexistence version to 7.0.1
wifi: rtw89: coex: Add report control v5 variation
wifi: rtw89: coex: Update RTL8852B LNA2 hardware parameter
wifi: rtw89: coex: Not to enable firmware report when WiFi is power saving
wifi: rtw89: coex: Add LPS protocol radio state for RTL8852B
bcma: remove unused mips_read32 function
bcma: Use of_address_to_resource()
wifi: mwifiex: remove unused evt_buf variable
wifi: brcmsmac: ampdu: remove unused suc_mpdu variable
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_reg()
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg()
...
====================
Link: https://lore.kernel.org/r/20230405111037.4792BC43443@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmQsOSQTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6N+QB/4w/slgDq0yAYs0GTsRA3Z3IGp8OAlp
PI6g1y9npiR7ffFdnC7ldYRSzTg2sStEKhe0xv80zOPl8IpI82Bz5a7oSb2Oi9tH
Fuf2JF2KYt08VfhGQKmhhcWHSh/vyCrAt14s8P2sCGQPEFBm2N8qrB9hhZera3Xb
gwNG+1nFjuFlUdRxMVQXLmyBdccl/+OLdtU/tI3Y4xm57Fxnghq7DyvmdGumJsbN
6zlyi+FTF3PGgOWglS/2rZeOO4PPWgfsZEeM6jhAt1E2ijtMJSQUl3w1Fpo6dcnq
49wSMFySI8jwpewLgZctZNheb73wvuvAqXnmPm8Krd0hi/apL79Tb1OE
=lDzw
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-04-04-2
The first patch is by Oliver Hartkopp and makes the maximum pdu size
of the CAN ISOTP protocol configurable.
The following 5 patches are by Dario Binacchi and add support for the
bxCAN controller by ST.
Geert Uytterhoeven's patch for the rcar_canfd driver fixes a sparse
warning.
Peng Fan's patch adds an optional power-domains property to the
flexcan device tree binding.
Frank Jungclaus adds support for CAN_CTRLMODE_BERR_REPORTING to the
esd_usb driver.
The last patch is by Oliver Hartkopp and converts the USB IDs of the
kvaser_usb driver to hexadecimal values.
* tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
kvaser_usb: convert USB IDs to hexadecimal values
can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING
dt-bindings: can: fsl,flexcan: add optional power-domains property
can: rcar_canfd: rcar_canfd_probe(): fix plain integer in transceivers[] init
can: bxcan: add support for ST bxCAN controller
ARM: dts: stm32: add pin map for CAN controller on stm32f4
ARM: dts: stm32: add CAN support on stm32f429
dt-bindings: net: can: add STM32 bxcan DT bindings
dt-bindings: arm: stm32: add compatible for syscon gcan node
can: isotp: add module parameter for maximum pdu size
====================
Link: https://lore.kernel.org/r/20230404145908.1714400-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The k[v]free_rcu() macro's single-argument form is deprecated.
Therefore switch to the new k[v]free_rcu_mightsleep() variant. The goal
is to avoid accidental use of the single-argument forms, which can
introduce functionality bugs in atomic contexts and latency bugs in
non-atomic contexts.
The callers are holding a mutex so the context allows blocking. Hence
using the API with a single argument will be fine, but use its new name.
There is no functionality change with this patch.
Fixes: 57588c7117 ("mac802154: Handle passive scanning")
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
The kfree_rcu() and kvfree_rcu() macros' single-argument forms are
deprecated. Therefore switch to the new kfree_rcu_mightsleep() and
kvfree_rcu_mightsleep() variants. The goal is to avoid accidental use
of the single-argument forms, which can introduce functionality bugs in
atomic contexts and latency bugs in non-atomic contexts.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
In the j1939_tp_tx_dat_new() function, an out-of-bounds memory access
could occur during the memcpy() operation if the size of skb->cb is
larger than the size of struct j1939_sk_buff_cb. This is because the
memcpy() operation uses the size of skb->cb, leading to a read beyond
the struct j1939_sk_buff_cb.
Updated the memcpy() operation to use the size of struct
j1939_sk_buff_cb instead of the size of skb->cb. This ensures that the
memcpy() operation only reads the memory within the bounds of struct
j1939_sk_buff_cb, preventing out-of-bounds memory access.
Additionally, add a BUILD_BUG_ON() to check that the size of skb->cb
is greater than or equal to the size of struct j1939_sk_buff_cb. This
ensures that the skb->cb buffer is large enough to hold the
j1939_sk_buff_cb structure.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Reported-by: Shuangpeng Bai <sjb7183@psu.edu>
Tested-by: Shuangpeng Bai <sjb7183@psu.edu>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://groups.google.com/g/syzkaller/c/G_LL-C3plRs/m/-8xCi6dCAgAJ
Link: https://lore.kernel.org/all/20230404073128.3173900-1-o.rempel@pengutronix.de
Cc: stable@vger.kernel.org
[mkl: rephrase commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If the number of lanes was forced and then subsequently the user
omits this parameter, the ksettings->lanes is reset. The driver
should then reset the number of lanes to the device's default
for the specified speed.
However, although the ksettings->lanes is set to 0, the mod variable
is not set to true to indicate the driver and userspace should be
notified of the changes.
The consequence is that the same ethtool operation will produce
different results based on the initial state.
If the initial state is:
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 2
Duplex: Full
Auto-negotiation: on
then executing 'ethtool -s swp1 speed 50000 autoneg off' will yield:
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 2
Duplex: Full
Auto-negotiation: off
While if the initial state is:
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 1
Duplex: Full
Auto-negotiation: off
executing the same 'ethtool -s swp1 speed 50000 autoneg off' results in:
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 1
Duplex: Full
Auto-negotiation: off
This patch fixes this behavior. Omitting lanes will always results in
the driver choosing the default lane width for the chosen speed. In this
scenario, regardless of the initial state, the end state will be, e.g.,
$ ethtool swp1 | grep -A 3 'Speed: '
Speed: 500000Mb/s
Lanes: 2
Duplex: Full
Auto-negotiation: off
Fixes: 012ce4dd31 ("ethtool: Extend link modes settings uAPI with lanes")
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/ac238d6b-8726-8156-3810-6471291dbc7f@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit dbca1596bb ("ping: convert to RCU lookups, get rid
of rwlock"), we use RCU for ping sockets, but we should use spinlock
for /proc/net/icmp to avoid a potential NULL deref mentioned in
the previous patch.
Let's go back to using spinlock there.
Note we can convert ping sockets to use hlist instead of hlist_nulls
because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets.
Fixes: dbca1596bb ("ping: convert to RCU lookups, get rid of rwlock")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bpf_[sk|inode|task|cgrp]_storage_[get|delete]() and bpf_get_socket_cookie() helpers
perform run-time check that sk|inode|task|cgrp pointer != NULL.
Teach verifier about this fact and allow bpf programs to pass
PTR_TO_BTF_ID | PTR_MAYBE_NULL into such helpers.
It will be used in the subsequent patch that will do
bpf_sk_storage_get(.., skb->sk, ...);
Even when 'skb' pointer is trusted the 'sk' pointer may be NULL.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-5-alexei.starovoitov@gmail.com
Remove duplicated if (atype == BPF_READ) btf_struct_access() from
btf_struct_access() callback and invoke it only for writes. This is
possible to do because currently btf_struct_access() custom callback
always delegates to generic btf_struct_access() helper for BPF_READ
accesses.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230404045029.82870-2-alexei.starovoitov@gmail.com
- Fix a crash and a resource leak in NFSv4 COMPOUND processing
- Fix issues with AUTH_SYS credential handling
- Try again to address an NFS/NFSD/SUNRPC build dependency regression
-----BEGIN PGP SIGNATURE-----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=bk6S
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a crash and a resource leak in NFSv4 COMPOUND processing
- Fix issues with AUTH_SYS credential handling
- Try again to address an NFS/NFSD/SUNRPC build dependency regression
* tag 'nfsd-6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: callback request does not use correct credential for AUTH_SYS
NFS: Remove "select RPCSEC_GSS_KRB5
sunrpc: only free unix grouplist after RCU settles
nfsd: call op_release, even when op_func returns an error
NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL
While the unix_gid object is rcu-freed, the group_info list that it
contains is not. Ensure that we only put the group list reference once
we are really freeing the unix_gid object.
Reported-by: Zhi Li <yieli@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2183056
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Fixes: fd5d2f7826 ("SUNRPC: Make server side AUTH_UNIX use lockless lookups")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This removes behaviour, where error code returned from any transport
was always switched to ENOMEM. This works in the same way as:
commit
c43170b7e1 ("vsock: return errors other than -ENOMEM to socket"),
but for receive calls.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds conversion of VMCI specific error code to general -ENOMEM. It
is preparation for the next patch, which changes af_vsock.c behaviour
on receive to pass value returned from transport to the user.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On the remote side, when QRTR socket is removed, af_qrtr will call
qrtr_port_remove() which broadcasts the DEL_CLIENT packet to all neighbours
including local NS. NS upon receiving the DEL_CLIENT packet, will remove
the lookups associated with the node:port and broadcasts the DEL_SERVER
packet.
But on the host side, due to the arrival of the DEL_CLIENT packet, the NS
would've already deleted the server belonging to that port. So when the
remote's NS again broadcasts the DEL_SERVER for that port, it throws below
error message on the host:
"failed while handling packet from 2:-2"
So fix this error by not broadcasting the DEL_SERVER packet when the
DEL_CLIENT packet gets processed."
Fixes: 0c2204a4ad ("net: qrtr: Migrate nameservice to kernel from userspace")
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Ram Kumar Dharuman <quic_ramd@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fact that PTP 2-step TX timestamping is broken on DSA switches if
the master also timestamps the same packets is documented by commit
f685e609a3 ("net: dsa: Deny PTP on master if switch supports it").
We attempt to help the users avoid shooting themselves in the foot by
making DSA reject the timestamping ioctls on an interface that is a DSA
master, and the switch tree beneath it contains switches which are aware
of PTP.
The only problem is that there isn't an established way of intercepting
ndo_eth_ioctl calls, so DSA creates avoidable burden upon the network
stack by creating a struct dsa_netdevice_ops with overlaid function
pointers that are manually checked from the relevant call sites. There
used to be 2 such dsa_netdevice_ops, but now, ndo_eth_ioctl is the only
one left.
There is an ongoing effort to migrate driver-visible hardware timestamping
control from the ndo_eth_ioctl() based API to a new ndo_hwtstamp_set()
model, but DSA actively prevents that migration, since dsa_master_ioctl()
is currently coded to manually call the master's legacy ndo_eth_ioctl(),
and so, whenever a network device driver would be converted to the new
API, DSA's restrictions would be circumvented, because any device could
be used as a DSA master.
The established way for unrelated modules to react on a net device event
is via netdevice notifiers. So we create a new notifier which gets
called whenever there is an attempt to change hardware timestamping
settings on a device.
Finally, there is another reason why a netdev notifier will be a good
idea, besides strictly DSA, and this has to do with PHY timestamping.
With ndo_eth_ioctl(), all MAC drivers must manually call
phy_has_hwtstamp() before deciding whether to act upon SIOCSHWTSTAMP,
otherwise they must pass this ioctl to the PHY driver via
phy_mii_ioctl().
With the new ndo_hwtstamp_set() API, it will be desirable to simply not
make any calls into the MAC device driver when timestamping should be
performed at the PHY level.
But there exist drivers, such as the lan966x switch, which need to
install packet traps for PTP regardless of whether they are the layer
that provides the hardware timestamps, or the PHY is. That would be
impossible to support with the new API.
The proposal there, too, is to introduce a netdev notifier which acts as
a better cue for switching drivers to add or remove PTP packet traps,
than ndo_hwtstamp_set(). The one introduced here "almost" works there as
well, except for the fact that packet traps should only be installed if
the PHY driver succeeded to enable hardware timestamping, whereas here,
we need to deny hardware timestamping on the DSA master before it
actually gets enabled. This is why this notifier is called "PRE_", and
the notifier that would get used for PHY timestamping and packet traps
would be called NETDEV_CHANGE_HWTSTAMP. This isn't a new concept, for
example NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER do the same thing.
In expectation of future netlink UAPI, we also pass a non-NULL extack
pointer to the netdev notifier, and we make DSA populate it with an
informative reason for the rejection. To avoid making it go to waste, we
make the ioctl-based dev_set_hwtstamp() create a fake extack and print
the message to the kernel log.
Link: https://lore.kernel.org/netdev/20230401191215.tvveoi3lkawgg6g4@skbuf/
Link: https://lore.kernel.org/netdev/20230310164451.ls7bbs6pdzs4m6pw@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dsa_master_ioctl() is in the process of getting converted to a different
API, where we won't have access to a struct ifreq * anymore, but rather,
to a struct kernel_hwtstamp_config.
Since ds->ops->port_hwtstamp_get() still uses struct ifreq *, this
creates a difficult situation where we have to make up such a dummy
pointer.
The conversion is a bit messy, because it forces a "good" implementation
of ds->ops->port_hwtstamp_get() to return -EFAULT in copy_to_user()
because of the NULL ifr->ifr_data pointer. However, it works, and it is
only a transient step until ds->ops->port_hwtstamp_get() gets converted
to the new API which passes struct kernel_hwtstamp_config and does not
call copy_to_user().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski suggested that we may want to add new UAPI for
controlling hardware timestamping through netlink in the future, and in
that case, we will be limited to the struct hwtstamp_config that is
currently passed in fixed binary format through the SIOCGHWTSTAMP and
SIOCSHWTSTAMP ioctls. It would be good if new kernel code already
started operating on an extensible kernel variant of that structure,
similar in concept to struct kernel_ethtool_coalesce vs struct
ethtool_coalesce.
Since struct hwtstamp_config is in include/uapi/linux/net_tstamp.h, here
we introduce include/linux/net_tstamp.h which shadows that other header,
but also includes it, so that existing includers of this header work as
before. In addition to that, we add the definition for the kernel-only
structure, and a helper which translates all fields by manual copying.
I am doing a manual copy in order to not force the alignment (or type)
of the fields of struct kernel_hwtstamp_config to be the same as of
struct hwtstamp_config, even though now, they are the same.
Link: https://lore.kernel.org/netdev/20230330223519.36ce7d23@kernel.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel will want to start using the more meaningful struct
hwtstamp_config pointer in more places, so move the copy_from_user() at
the beginning of dev_set_hwtstamp() in order to get to that, and pass
this argument to net_hwtstamp_validate().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA does not want to intercept all ioctls handled by dev_eth_ioctl(),
only SIOCSHWTSTAMP. This can be seen from commit f685e609a3 ("net:
dsa: Deny PTP on master if switch supports it"). However, the way in
which the dsa_ndo_eth_ioctl() is called would suggest otherwise.
Split the handling of SIOCSHWTSTAMP and SIOCGHWTSTAMP ioctls into
separate case statements of dev_ifsioc(), and make each one call its own
sub-function. This also removes the dsa_ndo_eth_ioctl() call from
dev_eth_ioctl(), which from now on exclusively handles PHY ioctls.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the expression "x == 0 || x != -95", the term "x == 0" does not
change the expression's logical value, because 0 != -95, and so,
if x is 0, the expression would still be true by virtue of the second
term. If x is non-zero, the expression depends on the truth value of
the second term anyway. As such, the first term is redundant and can
be deleted.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "switch (cmd)" block from dev_ifsioc() gained a bit too much
unnecessary manual handling of "cmd" in the "default" case, starting
with the private ioctls.
Clean that up by using the "ellipsis" gcc extension, adding separate
cases for the rest of the ioctls, and letting the default case only
return -EINVAL.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a corner case where the asoc out stream count may change
after wait_for_sndbuf.
When the main thread in the client starts a connection, if its out stream
count is set to N while the in stream count in the server is set to N - 2,
another thread in the client keeps sending the msgs with stream number
N - 1, and waits for sndbuf before processing INIT_ACK.
However, after processing INIT_ACK, the out stream count in the client is
shrunk to N - 2, the same to the in stream count in the server. The crash
occurs when the thread waiting for sndbuf is awake and sends the msg in a
non-existing stream(N - 1), the call trace is as below:
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
Call Trace:
<TASK>
sctp_cmd_send_msg net/sctp/sm_sideeffect.c:1114 [inline]
sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1777 [inline]
sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline]
sctp_do_sm+0x197d/0x5310 net/sctp/sm_sideeffect.c:1170
sctp_primitive_SEND+0x9f/0xc0 net/sctp/primitive.c:163
sctp_sendmsg_to_asoc+0x10eb/0x1a30 net/sctp/socket.c:1868
sctp_sendmsg+0x8d4/0x1d90 net/sctp/socket.c:2026
inet_sendmsg+0x9d/0xe0 net/ipv4/af_inet.c:825
sock_sendmsg_nosec net/socket.c:722 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:745
The fix is to add an unlikely check for the send stream number after the
thread wakes up from the wait_for_sndbuf.
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Reported-by: syzbot+47c24ca20a2fa01f082e@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 0db3dc73f7 ("[NETPOLL]: tx lock deadlock fix") narrowed
down the region under netif_tx_trylock() inside netpoll_send_skb().
(At that point in time netif_tx_trylock() would lock all queues of
the device.) Taking the tx lock was problematic because driver's
cleanup method may take the same lock. So the change made us hold
the xmit lock only around xmit, and expected the driver to take
care of locking within ->ndo_poll_controller().
Unfortunately this only works if netpoll isn't itself called with
the xmit lock already held. Netpoll code is careful and uses
trylock(). The drivers, however, may be using plain lock().
Printing while holding the xmit lock is going to result in rare
deadlocks.
Luckily we record the xmit lock owners, so we can scan all the queues,
the same way we scan NAPI owners. If any of the xmit locks is held
by the local CPU we better not attempt any polling.
It would be nice if we could narrow down the check to only the NAPIs
and the queue we're trying to use. I don't see a way to do that now.
Reported-by: Roman Gushchin <roman.gushchin@linux.dev>
Fixes: 0db3dc73f7 ("[NETPOLL]: tx lock deadlock fix")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In xen_9pfs_front_probe, it calls xen_9pfs_front_alloc_dataring
to init priv->rings and bound &ring->work with p9_xen_response.
When it calls xen_9pfs_front_event_handler to handle IRQ requests,
it will finally call schedule_work to start the work.
When we call xen_9pfs_front_remove to remove the driver, there
may be a sequence as follows:
Fix it by finishing the work before cleanup in xen_9pfs_front_free.
Note that, this bug is found by static analysis, which might be
false positive.
CPU0 CPU1
|p9_xen_response
xen_9pfs_front_remove|
xen_9pfs_front_free|
kfree(priv) |
//free priv |
|p9_tag_lookup
|//use priv->client
Fixes: 71ebd71921 ("xen/9pfs: connect to the backend")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Bugfixes:
* Fix shutdown of NFS TCP client sockets
* Fix hangs when recovering open state after a server reboot
-----BEGIN PGP SIGNATURE-----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=S4il
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.3-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Fix shutdown of NFS TCP client sockets
- Fix hangs when recovering open state after a server reboot
* tag 'nfs-for-6.3-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: fix shutdown of NFS TCP client socket
NFSv4: Fix hangs when recovering open state after a server reboot
1. No need to disable BH in nfnetlink proc handler, freeing happens
via call_rcu.
2. Expose classid in nfetlink_queue, from Eric Sage.
3. Fix nfnetlink message description comments, from Matthieu De Beule.
4. Allow removal of offloaded connections via ctnetlink, from Paul Blakey.
Signed-off-by: Florian Westphal <fw@strlen.de>
-----BEGIN PGP SIGNATURE-----
iQJBBAABCAArFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmQmuXoNHGZ3QHN0cmxl
bi5kZQAKCRBwkajZrV/2AAlxEACzFDfO6Jf+yGT6sF+927JjPugwSGpqywD24/ky
9IqPjJLQurMoPRf9BaRsdjIlxKdhJXog2p6iUgNfXzNgIfT9r7nv/er0TET6ieQk
3tIR8RqsphRR/JOMlk3vvWqp0Vlh+AX3kYaHo4kCO6Ir0b/OJx8eOYd1+Dl+mz1e
ggGff5oROXXtMP7LvDs8WQ07aIsrUFeZnLrjZl0sUV7yoqld8K/V7JQrzHn+XXqi
ERGeymHb4zd/9ljfnt/pkrMn9oJjU9ji8KC5QVfksT01WuI3g2WQtHjRaYuC9b1t
8ASWIQCoxwMk3HBsBevj5e/QzrF8oe+yAWUeO133ezsTv5N07z/jT6sUbZ5mXHTF
hz2qAKk3ABNhkCTZHxZlDxIEB9uf0ItbKVSLl0s0j33fjyrchPjfxLzxSSYekOXQ
xH8zYECsdhivEMB28sKLZqywdWM8vCtazqojRHKunPRH43diESuu9WkAcge4y+XD
EJQR8FWpyuHS0ux6m/Tx6KqVoSiE+LcCbhs7KOud+hHCdpY3aZ6rrBXpctN1LEsl
37Eg0hrAEcBfKZ1z6rlULNYKKOAdjbD+ySSf2e8vnjlCeiNOZqq+c/yD1ElW14Yz
u8xR099ZY89hy0TUhSgJRl/5VcSswMVy7VNiqB6gv+8X/u8XZF/+c7R8gO0Yxdmq
OadEEg==
=EBSm
-----END PGP SIGNATURE-----
Merge tag 'nf-next-2023-03-30' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter updates for net-next
1. No need to disable BH in nfnetlink proc handler, freeing happens
via call_rcu.
2. Expose classid in nfetlink_queue, from Eric Sage.
3. Fix nfnetlink message description comments, from Matthieu De Beule.
4. Allow removal of offloaded connections via ctnetlink, from Paul Blakey.
* tag 'nf-next-2023-03-30' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: ctnetlink: Support offloaded conntrack entry deletion
netfilter: Correct documentation errors in nf_tables.h
netfilter: nfnetlink_queue: enable classid socket info retrieval
netfilter: nfnetlink_log: remove rcu_bh usage
====================
Link: https://lore.kernel.org/r/20230331104809.2959-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to AP beacon, this enables the basic mesh EHT mode, including
EHT operation IE and the fixed field of EHT operation information IE.
As for the optional part (i.e. preamble puncturing bitmap) will be
added in future patch.
Tested-by: Lian Chen <lian.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://lore.kernel.org/r/1e0ddb9001312451c3e99c4eed2072caf8075f61.1679935259.git.ryder.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a few merge conflicts due to overlapping
fixes and changes, merge wireless/main to fix them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This adds conversion of VMCI specific error code to general -ENOMEM. It
is needed, because af_vsock.c passes error value returned from transport
to the user, which does not expect to get VMCI_ERROR_* values.
Fixes: c43170b7e1 ("vsock: return errors other than -ENOMEM to socket")
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 65b32f801b ("uapi: move IPPROTO_L2TP to in.h") moved the
definition of IPPROTO_L2TP from a define to an enum, but since
__stringify doesn't work properly with enums, we ended up breaking the
modalias strings for the l2tp modules:
$ modinfo l2tp_ip l2tp_ip6 | grep alias
alias: net-pf-2-proto-IPPROTO_L2TP
alias: net-pf-2-proto-2-type-IPPROTO_L2TP
alias: net-pf-10-proto-IPPROTO_L2TP
alias: net-pf-10-proto-2-type-IPPROTO_L2TP
Use the resolved number directly in MODULE_ALIAS_*() macros (as we
already do with SOCK_DGRAM) to fix the alias strings:
$ modinfo l2tp_ip l2tp_ip6 | grep alias
alias: net-pf-2-proto-115
alias: net-pf-2-proto-115-type-2
alias: net-pf-10-proto-115
alias: net-pf-10-proto-115-type-2
Moreover, fix the ordering of the parameters passed to
MODULE_ALIAS_NET_PF_PROTO_TYPE() by switching proto and type.
Fixes: 65b32f801b ("uapi: move IPPROTO_L2TP to in.h")
Link: https://lore.kernel.org/lkml/ZCQt7hmodtUaBlCP@righiandr-XPS-13-7390
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Our Network Load Balancer (NLB) [0] has multiple nodes with different
IP addresses, and each node forwards TCP flows from clients to backend
targets. NLB has an option to preserve the client's source IP address
and port when routing packets to backend targets. [1]
When a client connects to two different NLB nodes, they may select the
same backend target. Then, if the client has used the same source IP
and port, the two flows at the backend side will have the same 4-tuple.
While testing around such cases, I saw these sequences on the backend
target.
IP 10.0.0.215.60000 > 10.0.3.249.10000: Flags [S], seq 2819965599, win 62727, options [mss 8365,sackOK,TS val 1029816180 ecr 0,nop,wscale 7], length 0
IP 10.0.3.249.10000 > 10.0.0.215.60000: Flags [S.], seq 3040695044, ack 2819965600, win 62643, options [mss 8961,sackOK,TS val 1224784076 ecr 1029816180,nop,wscale 7], length 0
IP 10.0.0.215.60000 > 10.0.3.249.10000: Flags [.], ack 1, win 491, options [nop,nop,TS val 1029816181 ecr 1224784076], length 0
IP 10.0.0.215.60000 > 10.0.3.249.10000: Flags [S], seq 2681819307, win 62727, options [mss 8365,sackOK,TS val 572088282 ecr 0,nop,wscale 7], length 0
IP 10.0.3.249.10000 > 10.0.0.215.60000: Flags [.], ack 1, win 490, options [nop,nop,TS val 1224794914 ecr 1029816181,nop,nop,sack 1 {4156821004:4156821005}], length 0
It seems to be working correctly, but the last ACK was generated by
tcp_send_dupack() and PAWSEstab was increased. This is because the
second connection has a smaller timestamp than the first one.
In this case, we should send a dup ACK in tcp_send_challenge_ack()
to increase the correct counter and rate-limit it properly.
Let's check the SYN flag after the PAWS tests to avoid adding unnecessary
overhead for most packets.
Link: https://docs.aws.amazon.com/elasticloadbalancing/latest/network/introduction.html [0]
Link: https://docs.aws.amazon.com/elasticloadbalancing/latest/network/load-balancer-target-groups.html#client-ip-preservation [1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch sets the skb owner in the recv and send path for virtio.
For the send path, this solves the leak caused when
virtio_transport_purge_skbs() finds skb->sk is always NULL and therefore
never matches it with the current socket. Setting the owner upon
allocation fixes this.
For the recv path, this ensures correctness of accounting and also
correct transfer of ownership in vsock_loopback (when skbs are sent from
one socket and received by another).
Fixes: 71dc9ec9ac ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/all/ZCCbATwov4U+GBUv@pop-os.localdomain/
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* TC offload support for drivers below mac80211
* reduced neighbor report (RNR) handling for AP mode
* mac80211 mesh fast-xmit and fast-rx support
* support for another mesh A-MSDU format
(seems nobody got the spec right)
Major driver changes:
Kalle moved the drivers that were just plain C files
in drivers/net/wireless/ to legacy/ and virtual/ dirs.
hwsim
* multi-BSSID support
* some FTM support
ath11k
* MU-MIMO parameters support
* ack signal support for management packets
rtl8xxxu
* support for RTL8710BU aka RTL8188GU chips
rtw89
* support for various newer firmware APIs
ath10k
* enabled threaded NAPI on WCN3990
iwlwifi
* lots of work for multi-link/EHT (wifi7)
* hardware timestamping support for some devices/firwmares
* TX beacon protection on newer hardware
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmQl9gkACgkQ10qiO8sP
aACnTw/+KHEjBePPNSiVOziE6tlKSIruabrsSbBBWWx4btFBT0YAnqiwf4Zyp67r
VaRWPxRNqjriKMPYDn/bpCrRgkqeN50iCV9n+/xh4TaiLokea0IuA/KDLNM+vBPf
0VJBpNdW8tKLM0YluGWuoWUAlkjujBzjHaW0sKoII/PLh6evLGEIhqdveE8052Bc
P3UMu3+FHXg+E1+1tpn/AK+b6bGQeBN3KG3h7uocwR4QE6xROdFPAmXDohbJ98pG
6EmCDuuFiYPwkKu3GsxmKFNbq7NatPoFtghBPQi4Sn9wGgWWlJcK7hlNTDDW5O7c
ZqyqY8BiUnh9A1ZcUCKLiHYx+mjxiE2P5wlfDbiZGm7k2JkrBu+AebRvtD4ie/UF
db8T321kZJ5XKI89yQT2DXzfrvhbw2D85eFudQpIyRguoPKicICLWOyw84+esNTI
2vqnbPVnYrLQ/X7SzKcdIh74fcSvL8Dj0EiUAzvhPDbgIvexiYDetBXVss8tXBsn
bpCRND05tpCqqW+LyulglmYTAbhZdCYOy4DAB+g6dtxHOR8A0eLbUHocm0zlPvqd
sc4pYpXHx4x+X3FPHpfxOqKUO87P7SvJ++d3Y3e09/ObLPSkn65ihsGJpMN/fj1e
BkJ2yF0KUfJMNhSl5p8VELT3XZevT0EIEKMvwoIgSsWPR8cxqoI=
=Zi6X
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Major stack changes:
* TC offload support for drivers below mac80211
* reduced neighbor report (RNR) handling for AP mode
* mac80211 mesh fast-xmit and fast-rx support
* support for another mesh A-MSDU format
(seems nobody got the spec right)
Major driver changes:
Kalle moved the drivers that were just plain C files
in drivers/net/wireless/ to legacy/ and virtual/ dirs.
hwsim
* multi-BSSID support
* some FTM support
ath11k
* MU-MIMO parameters support
* ack signal support for management packets
rtl8xxxu
* support for RTL8710BU aka RTL8188GU chips
rtw89
* support for various newer firmware APIs
ath10k
* enabled threaded NAPI on WCN3990
iwlwifi
* lots of work for multi-link/EHT (wifi7)
* hardware timestamping support for some devices/firwmares
* TX beacon protection on newer hardware
* tag 'wireless-next-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (181 commits)
wifi: clean up erroneously introduced file
wifi: iwlwifi: mvm: correctly use link in iwl_mvm_sta_del()
wifi: iwlwifi: separate AP link management queues
wifi: iwlwifi: mvm: free probe_resp_data later
wifi: iwlwifi: bump FW API to 75 for AX devices
wifi: iwlwifi: mvm: move max_agg_bufsize into host TLC lq_sta
wifi: iwlwifi: mvm: send full STA during HW restart
wifi: iwlwifi: mvm: rework active links counting
wifi: iwlwifi: mvm: update mac config when assigning chanctx
wifi: iwlwifi: mvm: use the correct link queue
wifi: iwlwifi: mvm: clean up mac_id vs. link_id in MLD sta
wifi: iwlwifi: mvm: fix station link data leak
wifi: iwlwifi: mvm: initialize max_rc_amsdu_len per-link
wifi: iwlwifi: mvm: use appropriate link for rate selection
wifi: iwlwifi: mvm: use the new lockdep-checking macros
wifi: iwlwifi: mvm: remove chanctx WARN_ON
wifi: iwlwifi: mvm: avoid sending MAC context for idle
wifi: iwlwifi: mvm: remove only link-specific AP keys
wifi: iwlwifi: mvm: skip inactive links
wifi: iwlwifi: mvm: adjust iwl_mvm_scan_respect_p2p_go_iter() for MLO
...
====================
Link: https://lore.kernel.org/r/20230330205612.921134-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* fix size calculation for EHT element to put into SKBs
* remove erroneous pre-RCU calls for drivers not using sta_state calls
* fix mesh forwarding and non-forwarding RX
* fix mesh flow dissection
* fix a potential NULL dereference on A-MSDU RX w/o station
* make two variable non-static that really shouldn't be static
-----BEGIN PGP SIGNATURE-----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=efo1
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few fixes:
* fix size calculation for EHT element to put into SKBs
* remove erroneous pre-RCU calls for drivers not using sta_state calls
* fix mesh forwarding and non-forwarding RX
* fix mesh flow dissection
* fix a potential NULL dereference on A-MSDU RX w/o station
* make two variable non-static that really shouldn't be static
* tag 'wireless-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix invalid drv_sta_pre_rcu_remove calls for non-uploaded sta
wifi: mac80211: fix flow dissection for forwarded packets
wifi: mac80211: fix mesh forwarding
wifi: mac80211: fix receiving mesh packets in forwarding=0 networks
wifi: mac80211: fix the size calculation of ieee80211_ie_len_eht_cap()
wifi: mac80211: fix potential null pointer dereference
wifi: mac80211: drop bogus static keywords in A-MSDU rx
====================
Link: https://lore.kernel.org/r/20230330203313.919164-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have the following code paths:
Host FDB (unicast RX filtering):
dsa_port_standalone_host_fdb_add() dsa_port_bridge_host_fdb_add()
| |
+--------------+ +------------+
| |
v v
dsa_port_host_fdb_add()
dsa_port_standalone_host_fdb_del() dsa_port_bridge_host_fdb_del()
| |
+--------------+ +------------+
| |
v v
dsa_port_host_fdb_del()
Host MDB (multicast RX filtering):
dsa_port_standalone_host_mdb_add() dsa_port_bridge_host_mdb_add()
| |
+--------------+ +------------+
| |
v v
dsa_port_host_mdb_add()
dsa_port_standalone_host_mdb_del() dsa_port_bridge_host_mdb_del()
| |
+--------------+ +------------+
| |
v v
dsa_port_host_mdb_del()
The logic added by commit 5e8a1e03aa ("net: dsa: install secondary
unicast and multicast addresses as host FDB/MDB") zeroes out
db.bridge.num if the switch doesn't support ds->fdb_isolation
(the majority doesn't). This is done for a reason explained in commit
c26933639b ("net: dsa: request drivers to perform FDB isolation").
Taking a single code path as example - dsa_port_host_fdb_add() - the
others are similar - the problem is that this function handles:
- DSA_DB_PORT databases, when called from
dsa_port_standalone_host_fdb_add()
- DSA_DB_BRIDGE databases, when called from
dsa_port_bridge_host_fdb_add()
So, if dsa_port_host_fdb_add() were to make any change on the
"bridge.num" attribute of the database, this would only be correct for a
DSA_DB_BRIDGE, and a type confusion for a DSA_DB_PORT bridge.
However, this bug is without consequences, for 2 reasons:
- dsa_port_standalone_host_fdb_add() is only called from code which is
(in)directly guarded by dsa_switch_supports_uc_filtering(ds), and that
function only returns true if ds->fdb_isolation is set. So, the code
only executed for DSA_DB_BRIDGE databases.
- Even if the code was not dead for DSA_DB_PORT, we have the following
memory layout:
struct dsa_bridge {
struct net_device *dev;
unsigned int num;
bool tx_fwd_offload;
refcount_t refcount;
};
struct dsa_db {
enum dsa_db_type type;
union {
const struct dsa_port *dp; // DSA_DB_PORT
struct dsa_lag lag;
struct dsa_bridge bridge; // DSA_DB_BRIDGE
};
};
So, the zeroization of dsa_db :: bridge :: num on a dsa_db structure of
type DSA_DB_PORT would access memory which is unused, because we only
use dsa_db :: dp for DSA_DB_PORT, and this is mapped at the same address
with dsa_db :: dev for DSA_DB_BRIDGE, thanks to the union definition.
It is correct to fix up dsa_db :: bridge :: num only from code paths
that come from the bridge / switchdev, so move these there.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230329133819.697642-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Conflicts:
drivers/net/ethernet/mediatek/mtk_ppe.c
3fbe4d8c0e ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
924531326e ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- phy: micrel: correct KSZ9131RNX EEE capabilities and advertisement
Current release - new code bugs:
- eth: wangxun: fix vector length of interrupt cause
- vsock/loopback: consistently protect the packet queue with
sk_buff_head.lock
- virtio/vsock: fix header length on skb merging
- wpan: ca8210: fix unsigned mac_len comparison with zero
Previous releases - regressions:
- eth: stmmac: don't reject VLANs when IFF_PROMISC is set
- eth: smsc911x: avoid PHY being resumed when interface is not up
- eth: mtk_eth_soc: fix tx throughput regression with direct 1G links
- eth: bnx2x: use the right build_skb() helper after core rework
- wwan: iosm: fix 7560 modem crash on use on unsupported channel
Previous releases - always broken:
- eth: sfc: don't overwrite offload features at NIC reset
- eth: r8169: fix RTL8168H and RTL8107E rx crc error
- can: j1939: prevent deadlock by moving j1939_sk_errqueue()
- virt: vmxnet3: use GRO callback when UPT is enabled
- virt: xen: don't do grant copy across page boundary
- phy: dp83869: fix default value for tx-/rx-internal-delay
- dsa: ksz8: fix multiple issues with ksz8_fdb_dump
- eth: mvpp2: fix classification/RSS of VLAN and fragmented packets
- eth: mtk_eth_soc: fix flow block refcounting logic
Misc:
- constify fwnode pointers in SFP handling
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/1Gi
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN and WPAN.
Still quite a few bugs from this release. This pull is a bit smaller
because major subtrees went into the previous one. Or maybe people
took spring break off?
Current release - regressions:
- phy: micrel: correct KSZ9131RNX EEE capabilities and advertisement
Current release - new code bugs:
- eth: wangxun: fix vector length of interrupt cause
- vsock/loopback: consistently protect the packet queue with
sk_buff_head.lock
- virtio/vsock: fix header length on skb merging
- wpan: ca8210: fix unsigned mac_len comparison with zero
Previous releases - regressions:
- eth: stmmac: don't reject VLANs when IFF_PROMISC is set
- eth: smsc911x: avoid PHY being resumed when interface is not up
- eth: mtk_eth_soc: fix tx throughput regression with direct 1G links
- eth: bnx2x: use the right build_skb() helper after core rework
- wwan: iosm: fix 7560 modem crash on use on unsupported channel
Previous releases - always broken:
- eth: sfc: don't overwrite offload features at NIC reset
- eth: r8169: fix RTL8168H and RTL8107E rx crc error
- can: j1939: prevent deadlock by moving j1939_sk_errqueue()
- virt: vmxnet3: use GRO callback when UPT is enabled
- virt: xen: don't do grant copy across page boundary
- phy: dp83869: fix default value for tx-/rx-internal-delay
- dsa: ksz8: fix multiple issues with ksz8_fdb_dump
- eth: mvpp2: fix classification/RSS of VLAN and fragmented packets
- eth: mtk_eth_soc: fix flow block refcounting logic
Misc:
- constify fwnode pointers in SFP handling"
* tag 'net-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow
net: ethernet: mtk_eth_soc: fix L2 offloading with DSA untag offload
net: ethernet: mtk_eth_soc: fix flow block refcounting logic
net: mvneta: fix potential double-frees in mvneta_txq_sw_deinit()
net: dsa: sync unicast and multicast addresses for VLAN filters too
net: dsa: mv88e6xxx: Enable IGMP snooping on user ports only
xen/netback: use same error messages for same errors
test/vsock: new skbuff appending test
virtio/vsock: WARN_ONCE() for invalid state of socket
virtio/vsock: fix header length on skb merging
bnxt_en: Add missing 200G link speed reporting
bnxt_en: Fix typo in PCI id to device description string mapping
bnxt_en: Fix reporting of test result in ethtool selftest
i40e: fix registers dump after run ethtool adapter self test
bnx2x: use the right build_skb() helper
net: ipa: compute DMA pool size properly
net: wwan: iosm: fixes 7560 modem crash
net: ethernet: mtk_eth_soc: fix tx throughput regression with direct 1G links
ice: fix invalid check for empty list in ice_sched_assoc_vsi_to_agg()
ice: add profile conflict check for AVF FDIR
...
Currently, offloaded conntrack entries (flows) can only be deleted
after they are removed from offload, which is either by timeout,
tcp state change or tc ct rule deletion. This can cause issues for
users wishing to manually delete or flush existing entries.
Support deletion of offloaded conntrack entries.
Example usage:
# Delete all offloaded (and non offloaded) conntrack entries
# whose source address is 1.2.3.4
$ conntrack -D -s 1.2.3.4
# Delete all entries
$ conntrack -F
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
This enables associating a socket with a v1 net_cls cgroup. Useful for
applying a per-cgroup policy when processing packets in userspace.
Signed-off-by: Eric Sage <eric_sage@apple.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
structure is free'd via call_rcu, so its safe to use rcu_read_lock only.
While at it, skip rcu_read_lock for lookup from packet path, its always
called with rcu held.
Signed-off-by: Florian Westphal <fw@strlen.de>
If certain conditions are met, DSA can install all necessary MAC
addresses on the CPU ports as FDB entries and disable flooding towards
the CPU (we call this RX filtering).
There is one corner case where this does not work.
ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
ip link set swp0 master br0 && ip link set swp0 up
ip link add link swp0 name swp0.100 type vlan id 100
ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100
Traffic through swp0.100 is broken, because the bridge turns on VLAN
filtering in the swp0 port (causing RX packets to be classified to the
FDB database corresponding to the VID from their 802.1Q header), and
although the 8021q module does call dev_uc_add() towards the real
device, that API is VLAN-unaware, so it only contains the MAC address,
not the VID; and DSA's current implementation of ndo_set_rx_mode() is
only for VID 0 (corresponding to FDB entries which are installed in an
FDB database which is only hit when the port is VLAN-unaware).
It's interesting to understand why the bridge does not turn on
IFF_PROMISC for its swp0 bridge port, and it may appear at first glance
that this is a regression caused by the logic in commit 2796d0c648
("bridge: Automatically manage port promiscuous mode."). After all,
a bridge port needs to have IFF_PROMISC by its very nature - it needs to
receive and forward frames with a MAC DA different from the bridge
ports' MAC addresses.
While that may be true, when the bridge is VLAN-aware *and* it has a
single port, there is no real reason to enable promiscuity even if that
is an automatic port, with flooding and learning (there is nowhere for
packets to go except to the BR_FDB_LOCAL entries), and this is how the
corner case appears. Adding a second automatic interface to the bridge
would make swp0 promisc as well, and would mask the corner case.
Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't
pass a VLAN ID), the only way to address that problem is to install host
FDB entries for the cartesian product of RX filtering MAC addresses and
VLAN RX filters.
Fixes: 7569459a52 ("net: dsa: manage flooding on the CPU ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
____napi_schedule() adds a napi into current cpu softnet_data poll_list,
then raises NET_RX_SOFTIRQ to make sure net_rx_action() will process it.
Idea of this patch is to not raise NET_RX_SOFTIRQ when being called indirectly
from net_rx_action(), because we can process poll_list from this point,
without going to full softirq loop.
This needs a change in net_rx_action() to make sure we restart
its main loop if sd->poll_list was updated without NET_RX_SOFTIRQ
being raised.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Based on initial patch from Jason Xing.
Idea is to not raise NET_RX_SOFTIRQ from napi_schedule_rps()
when we queued a packet into another cpu backlog.
We can do this only in the context of us being called indirectly
from net_rx_action(), to have the guarantee our rps_ipi_list
will be processed before we exit from net_rx_action().
Link: https://lore.kernel.org/lkml/20230325152417.5403-1-kerneljasonxing@gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We want to make two optimizations in napi_schedule_rps() and
____napi_schedule() which require to know if these helpers are
called from net_rx_action(), instead of being called from
other contexts.
sd.in_net_rx_action is only read/written by the owning cpu.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
napi_schedule_rps() return value is ignored, remove it.
Change the comment to clarify the intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Tested-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
clang with W=1 reports
net/mac80211/rc80211_minstrel_ht.c:1711:6: error: variable
'n_supported' set but not used [-Werror,-Wunused-but-set-variable]
int n_supported = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230325132610.1334820-1-trix@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Avoid potential data corruption issues caused by uninitialized driver
private data structures.
Reported-by: Brian Coverstone <brian@mainsequence.net>
Fixes: 6a9d1b91f3 ("mac80211: add pre-RCU-sync sta removal driver operation")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230324120924.38412-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adjust the network header to point at the correct payload offset
Fixes: 986e43b19a ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230324120924.38412-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When forwarding is set to 0, frames are typically sent with ttl=1.
Move the ttl decrement check below the check for local receive in order to
fix packet drops.
Reported-by: Thomas Hühn <thomas.huehn@hs-nordhausen.de>
Reported-by: Nick Hainke <vincent@systemli.org>
Fixes: 986e43b19a ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230326151709.17743-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rx->sta->amsdu_mesh_control is being passed to ieee80211_amsdu_to_8023s
without checking rx->sta. Since it doesn't make sense to accept A-MSDU
packets without a sta, simply add a check earlier.
Fixes: 6e4c0d0460 ("wifi: mac80211: add a workaround for receiving non-standard mesh A-MSDU")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230330090001.60750-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This adds WARN_ONCE() and return from stream dequeue callback when
socket's queue is empty, but 'rx_bytes' still non-zero. This allows
the detection of potential bugs due to packet merging (see previous
patch).
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This fixes appending newly arrived skbuff to the last skbuff of the
socket's queue. Problem fires when we are trying to append data to skbuff
which was already processed in dequeue callback at least once. Dequeue
callback calls function 'skb_pull()' which changes 'skb->len'. In current
implementation 'skb->len' is used to update length in header of the last
skbuff after new data was copied to it. This is bug, because value in
header is used to calculate 'rx_bytes'/'fwd_cnt' and thus must be not
be changed during skbuff's lifetime.
Bug starts to fire since:
commit 0777061657
("virtio/vsock: don't use skbuff state to account credit")
It presents before, but didn't triggered due to a little bit buggy
implementation of credit calculation logic. So use Fixes tag for it.
Fixes: 0777061657 ("virtio/vsock: don't use skbuff state to account credit")
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stefan Schmidt says:
====================
ieee802154 for net 2023-03-29
Two small fixes this time.
Dongliang Mu removed an unnecessary null pointer check.
Harshit Mogalapalli fixed an int comparison unsigned against signed from a
recent other fix in the ca8210 driver.
* tag 'ieee802154-for-net-2023-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
net: ieee802154: remove an unnecessary null pointer check
ca8210: Fix unsigned mac_len comparison with zero in ca8210_skb_tx()
====================
Link: https://lore.kernel.org/r/20230329064541.2147400-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A CC that implements tcp_congestion_ops.cong_control() should be able to
write app_limited. A built-in CC or one from a kernel module is already
able to write to this member of struct tcp_sock.
For a BPF program, write access has not been allowed, yet.
Signed-off-by: Yixin Shen <bobankhshen@gmail.com>
Link: https://lore.kernel.org/r/20230329073558.8136-2-bobankhshen@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Only the in-kernel PM uses the number of address and subflow limits
allowed per connection.
It then makes more sense not to display such info when other PMs are
used not to confuse the userspace by showing limits not being used.
While at it, we can get rid of the "val" variable and add indentations
instead.
It would have been good to have done this modification directly in
commit 4d25247d3a ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs")
but as we change a bit the behaviour, it is fine not to backport it to
stable.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Postpone the msk cloning to the child process creation
so that we can avoid a bunch of conditionals.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/61
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the syn_recv fallback path, the msk is unused. We can skip
setting the socket address.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We'll call memset(&tmp, 0, sizeof(tmp)) later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some code defines the IPv6 wildcard address as a local variable and
use it with memcmp() or ipv6_addr_equal().
Let's use in6addr_any and ipv6_addr_any() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds sockmap support for vsock sockets. It is intended to be
usable by all transports, but only the virtio and loopback transports
are implemented.
SOCK_STREAM, SOCK_DGRAM, and SOCK_SEQPACKET are all supported.
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Under high contention dst_entry::__refcnt becomes a significant bottleneck.
atomic_inc_not_zero() is implemented with a cmpxchg() loop, which goes into
high retry rates on contention.
Switch the reference count to rcuref_t which results in a significant
performance gain. Rename the reference count member to __rcuref to reflect
the change.
The gain depends on the micro-architecture and the number of concurrent
operations and has been measured in the range of +25% to +130% with a
localhost memtier/memcached benchmark which amplifies the problem
massively.
Running the memtier/memcached benchmark over a real (1Gb) network
connection the conversion on top of the false sharing fix for struct
dst_entry::__refcnt results in a total gain in the 2%-5% range over the
upstream baseline.
Reported-by: Wangyang Guo <wangyang.guo@intel.com>
Reported-by: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230307125538.989175656@linutronix.de
Link: https://lore.kernel.org/r/20230323102800.215027837@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dst_entry::__refcnt is highly contended in scenarios where many connections
happen from and to the same IP. The reference count is an atomic_t, so the
reference count operations have to take the cache-line exclusive.
Aside of the unavoidable reference count contention there is another
significant problem which is caused by that: False sharing.
perf top identified two affected read accesses. dst_entry::lwtstate and
rtable::rt_genid.
dst_entry:__refcnt is located at offset 64 of dst_entry, which puts it into
a seperate cacheline vs. the read mostly members located at the beginning
of the struct.
That prevents false sharing vs. the struct members in the first 64
bytes of the structure, but there is also
dst_entry::lwtstate
which is located after the reference count and in the same cache line. This
member is read after a reference count has been acquired.
struct rtable embeds a struct dst_entry at offset 0. struct dst_entry has a
size of 112 bytes, which means that the struct members of rtable which
follow the dst member share the same cache line as dst_entry::__refcnt.
Especially
rtable::rt_genid
is also read by the contexts which have a reference count acquired
already.
When dst_entry:__refcnt is incremented or decremented via an atomic
operation these read accesses stall. This was found when analysing the
memtier benchmark in 1:100 mode, which amplifies the problem extremly.
Move the rt[6i]_uncached[_list] members out of struct rtable and struct
rt6_info into struct dst_entry to provide padding and move the lwtstate
member after that so it ends up in the same cache line.
The resulting improvement depends on the micro-architecture and the number
of CPUs. It ranges from +20% to +120% with a localhost memtier/memcached
benchmark.
[ tglx: Rearrange struct ]
Signed-off-by: Wangyang Guo <wangyang.guo@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230323102800.042297517@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both of these functions have no effect when input argument is 0, so to
avoid useless spinlock access, check argument before it.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds small optimization for tx path: instead of allocating single
skbuff on every call to transport, allocate multiple skbuff's until
credit space allows, thus trying to send as much as possible data without
return to af_vsock.c.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While reviewing the udp-iter batching patches, noticed the bpf_iter_tcp
calling sock_put() is incorrect. It should call sock_gen_put instead
because bpf_iter_tcp is iterating the ehash table which has the req sk
and tw sk. This patch replaces all sock_put with sock_gen_put in the
bpf_iter_tcp codepath.
Fixes: 04c7820b77 ("bpf: tcp: Bpf iter batching and lock_sock")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230328004232.2134233-1-martin.lau@linux.dev
With ISO 15765-2:2016 the PDU size is not limited to 2^12 - 1 (4095)
bytes but can be represented as a 32 bit unsigned integer value which
allows 2^32 - 1 bytes (~4GB). The use-cases like automotive unified
diagnostic services (UDS) and flashing of ECUs still use the small
static buffers which are provided at socket creation time.
When a use-case requires to transfer PDUs up to 1025 kByte the maximum
PDU size can now be extended by setting the module parameter
max_pdu_size. The extended size buffers are only allocated on a
per-socket/connection base when needed at run-time.
changes since v2: https://lore.kernel.org/all/20230313172510.3851-1-socketcan@hartkopp.net
- use ARRAY_SIZE() to reference DEFAULT_MAX_PDU_SIZE only at one place
changes since v1: https://lore.kernel.org/all/20230311143446.3183-1-socketcan@hartkopp.net
- limit the minimum 'max_pdu_size' to 4095 to maintain the classic
behavior before ISO 15765-2:2016
Link: https://github.com/raspberrypi/linux/issues/5371
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230326115911.15094-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This attribute, which is part of ethtool's ring param configuration
allows the user to specify the maximum number of the packet's payload
that can be written directly to the device.
Example usage:
# ethtool -G [interface] tx-push-buf-len [number of bytes]
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, MAX_SKB_FRAGS value is 17.
For standard tcp sendmsg() traffic, no big deal because tcp_sendmsg()
attempts order-3 allocations, stuffing 32768 bytes per frag.
But with zero copy, we use order-0 pages.
For BIG TCP to show its full potential, we add a config option
to be able to fit up to 45 segments per skb.
This is also needed for BIG TCP rx zerocopy, as zerocopy currently
does not support skbs with frag list.
We have used MAX_SKB_FRAGS=45 value for years at Google before
we deployed 4K MTU, with no adverse effect, other than
a recent issue in mlx4, fixed in commit 26782aad00
("net/mlx4: MLX4_TX_BOUNCE_BUFFER_SIZE depends on MAX_SKB_FRAGS")
Back then, goal was to be able to receive full size (64KB) GRO
packets without the frag_list overhead.
Note that /proc/sys/net/core/max_skb_frags can also be used to limit
the number of fragments TCP can use in tx packets.
By default we keep the old/legacy value of 17 until we get
more coverage for the updated values.
Sizes of struct skb_shared_info on 64bit arches
MAX_SKB_FRAGS | sizeof(struct skb_shared_info):
==============================================
17 320
21 320+64 = 384
25 320+128 = 448
29 320+192 = 512
33 320+256 = 576
37 320+320 = 640
41 320+384 = 704
45 320+448 = 768
This inflation might cause problems for drivers assuming they could pack
both the incoming packet (for MTU=1500) and skb_shared_info in half a page,
using build_skb().
v3: fix build error when CONFIG_NET=n
v2: fix two build errors assuming MAX_SKB_FRAGS was "unsigned long"
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20230323162842.1935061-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Syzkaller reported the following issue:
=====================================================
BUG: KMSAN: uninit-value in aio_rw_done fs/aio.c:1520 [inline]
BUG: KMSAN: uninit-value in aio_write+0x899/0x950 fs/aio.c:1600
aio_rw_done fs/aio.c:1520 [inline]
aio_write+0x899/0x950 fs/aio.c:1600
io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019
__do_sys_io_submit fs/aio.c:2078 [inline]
__se_sys_io_submit+0x293/0x770 fs/aio.c:2048
__x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook mm/slab.h:766 [inline]
slab_alloc_node mm/slub.c:3452 [inline]
__kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491
__do_kmalloc_node mm/slab_common.c:967 [inline]
__kmalloc+0x11d/0x3b0 mm/slab_common.c:981
kmalloc_array include/linux/slab.h:636 [inline]
bcm_tx_setup+0x80e/0x29d0 net/can/bcm.c:930
bcm_sendmsg+0x3a2/0xce0 net/can/bcm.c:1351
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
sock_write_iter+0x495/0x5e0 net/socket.c:1108
call_write_iter include/linux/fs.h:2189 [inline]
aio_write+0x63a/0x950 fs/aio.c:1600
io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019
__do_sys_io_submit fs/aio.c:2078 [inline]
__se_sys_io_submit+0x293/0x770 fs/aio.c:2048
__x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
CPU: 1 PID: 5034 Comm: syz-executor350 Not tainted 6.2.0-rc6-syzkaller-80422-geda666ff2276 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
=====================================================
We can follow the call chain and find that 'bcm_tx_setup' function
calls 'memcpy_from_msg' to copy some content to the newly allocated
frame of 'op->frames'. After that the 'len' field of copied structure
being compared with some constant value (64 or 8). However, if
'memcpy_from_msg' returns an error, we will compare some uninitialized
memory. This triggers 'uninit-value' issue.
This patch will add 'memcpy_from_msg' possible errors processing to
avoid uninit-value issue.
Tested via syzkaller
Reported-by: syzbot+c9bfd85eca611ebf5db1@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=47f897f8ad958bbde5790ebf389b5e7e0a345089
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Fixes: 6f3b911d5f ("can: bcm: add support for CAN FD frames")
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230314120445.12407-1-ivan.orlov0322@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This commit addresses a deadlock situation that can occur in certain
scenarios, such as when running data TP/ETP transfer and subscribing to
the error queue while receiving a net down event. The deadlock involves
locks in the following order:
3
j1939_session_list_lock -> active_session_list_lock
j1939_session_activate
...
j1939_sk_queue_activate_next -> sk_session_queue_lock
...
j1939_xtp_rx_eoma_one
2
j1939_sk_queue_drop_all -> sk_session_queue_lock
...
j1939_sk_netdev_event_netdown -> j1939_socks_lock
j1939_netdev_notify
1
j1939_sk_errqueue -> j1939_socks_lock
__j1939_session_cancel -> active_session_list_lock
j1939_tp_rxtimer
CPU0 CPU1
---- ----
lock(&priv->active_session_list_lock);
lock(&jsk->sk_session_queue_lock);
lock(&priv->active_session_list_lock);
lock(&priv->j1939_socks_lock);
The solution implemented in this commit is to move the
j1939_sk_errqueue() call out of the active_session_list_lock context,
thus preventing the deadlock situation.
Reported-by: syzbot+ee1cd780f69483a8616b@syzkaller.appspotmail.com
Fixes: 5b9272e93f ("can: j1939: extend UAPI to notify about RX status")
Co-developed-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20230324130141.2132787-1-o.rempel@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This fixes the following warning when compiled with GCC 12.2.0 and W=1.
net/core/dev_ioctl.c:475: warning: Function parameter or member 'data'
not described in 'dev_ioctl'
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pkt_list_lock was used before commit 71dc9ec9ac ("virtio/vsock:
replace virtio_vsock_pkt with sk_buff") to protect the packet queue.
After that commit we switched to sk_buff and we are using
sk_buff_head.lock in almost every place to protect the packet queue
except in vsock_loopback_work() when we call skb_queue_splice_init().
As reported by syzbot, this caused unlocked concurrent access to the
packet queue between vsock_loopback_work() and
vsock_loopback_cancel_pkt() since it is not holding pkt_list_lock.
With the introduction of sk_buff_head, pkt_list_lock is redundant and
can cause confusion, so let's remove it and use sk_buff_head.lock
everywhere to protect the packet queue access.
Fixes: 71dc9ec9ac ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Cc: bobby.eshleman@bytedance.com
Reported-and-tested-by: syzbot+befff0a9536049e7902e@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add some additional debug flags to assist with debugging
cache changes. Also add some additional open modes so we
can track cache state in fids more directly.
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
The remap of fill and completion rings was frowned upon as they
control the usage of UMEM which does not support concurrent use.
At the same time this would disallow the remap of these rings
into another process.
A possible use case is that the user wants to transfer the socket/
UMEM ownership to another process (via SYS_pidfd_getfd) and so
would need to also remap these rings.
This will have no impact on current usages and just relaxes the
remap limitation.
Signed-off-by: Nuno Gonçalves <nunog@fr24.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230324100222.13434-1-nunog@fr24.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch uses bpf_mem_alloc for the task and cgroup local storage that
the bpf prog can easily get a hold of the storage owner's PTR_TO_BTF_ID.
eg. bpf_get_current_task_btf() can be used in some of the kmalloc code
path which will cause deadlock/recursion. bpf_mem_cache_alloc is
deadlock free and will solve a legit use case in [1].
For sk storage, its batch creation benchmark shows a few percent
regression when the sk create/destroy batch size is larger than 32.
The sk creation/destruction happens much more often and
depends on external traffic. Considering it is hypothetical
to be able to cause deadlock with sk storage, it can cross
the bridge to use bpf_mem_alloc till a legit (ie. useful)
use case comes up.
For inode storage, bpf_local_storage_destroy() is called before
waiting for a rcu gp and its memory cannot be reused immediately.
inode stays with kmalloc/kfree after the rcu [or tasks_trace] gp.
A 'bool bpf_ma' argument is added to bpf_local_storage_map_alloc().
Only task and cgroup storage have 'bpf_ma == true' which
means to use bpf_mem_cache_alloc/free(). This patch only changes
selem to use bpf_mem_alloc for task and cgroup. The next patch
will change the local_storage to use bpf_mem_alloc also for
task and cgroup.
Here is some more details on the changes:
* memory allocation:
After bpf_mem_cache_alloc(), the SDATA(selem)->data is zero-ed because
bpf_mem_cache_alloc() could return a reused selem. It is to keep
the existing bpf_map_kzalloc() behavior. Only SDATA(selem)->data
is zero-ed. SDATA(selem)->data is the visible part to the bpf prog.
No need to use zero_map_value() to do the zeroing because
bpf_selem_free(..., reuse_now = true) ensures no bpf prog is using
the selem before returning the selem through bpf_mem_cache_free().
For the internal fields of selem, they will be initialized when
linking to the new smap and the new local_storage.
When 'bpf_ma == false', nothing changes in this patch. It will
stay with the bpf_map_kzalloc().
* memory free:
The bpf_selem_free() and bpf_selem_free_rcu() are modified to handle
the bpf_ma == true case.
For the common selem free path where its owner is also being destroyed,
the mem is freed in bpf_local_storage_destroy(), the owner (task
and cgroup) has gone through a rcu gp. The memory can be reused
immediately, so bpf_local_storage_destroy() will call
bpf_selem_free(..., reuse_now = true) which will do
bpf_mem_cache_free() for immediate reuse consideration.
An exception is the delete elem code path. The delete elem code path
is called from the helper bpf_*_storage_delete() and the syscall
bpf_map_delete_elem(). This path is an unusual case for local
storage because the common use case is to have the local storage
staying with its owner life time so that the bpf prog and the user
space does not have to monitor the owner's destruction. For the delete
elem path, the selem cannot be reused immediately because there could
be bpf prog using it. It will call bpf_selem_free(..., reuse_now = false)
and it will wait for a rcu tasks trace gp before freeing the elem. The
rcu callback is changed to do bpf_mem_cache_raw_free() instead of kfree().
When 'bpf_ma == false', it should be the same as before.
__bpf_selem_free() is added to do the kfree_rcu and call_tasks_trace_rcu().
A few words on the 'reuse_now == true'. When 'reuse_now == true',
it is still racing with bpf_local_storage_map_free which is under rcu
protection, so it still needs to wait for a rcu gp instead of kfree().
Otherwise, the selem may be reused by slab for a totally different struct
while the bpf_local_storage_map_free() is still using it (as a
rcu reader). For the inode case, there may be other rcu readers also.
In short, when bpf_ma == false and reuse_now == true => vanilla rcu.
[1]: https://lore.kernel.org/bpf/20221118190109.1512674-1-namhyung@kernel.org/
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20230322215246.1675516-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
KF_RELEASE kfuncs are not currently treated as having KF_TRUSTED_ARGS,
even though they have a superset of the requirements of KF_TRUSTED_ARGS.
Like KF_TRUSTED_ARGS, KF_RELEASE kfuncs require a 0-offset argument, and
don't allow NULL-able arguments. Unlike KF_TRUSTED_ARGS which require
_either_ an argument with ref_obj_id > 0, _or_ (ref->type &
BPF_REG_TRUSTED_MODIFIERS) (and no unsafe modifiers allowed), KF_RELEASE
only allows for ref_obj_id > 0. Because KF_RELEASE today doesn't
automatically imply KF_TRUSTED_ARGS, some of these requirements are
enforced in different ways that can make the behavior of the verifier
feel unpredictable. For example, a KF_RELEASE kfunc with a NULL-able
argument will currently fail in the verifier with a message like, "arg#0
is ptr_or_null_ expected ptr_ or socket" rather than "Possibly NULL
pointer passed to trusted arg0". Our intention is the same, but the
semantics are different due to implemenetation details that kfunc authors
and BPF program writers should not need to care about.
Let's make the behavior of the verifier more consistent and intuitive by
having KF_RELEASE kfuncs imply the presence of KF_TRUSTED_ARGS. Our
eventual goal is to have all kfuncs assume KF_TRUSTED_ARGS by default
anyways, so this takes us a step in that direction.
Note that it does not make sense to assume KF_TRUSTED_ARGS for all
KF_ACQUIRE kfuncs. KF_ACQUIRE kfuncs can have looser semantics than
KF_RELEASE, with e.g. KF_RCU | KF_RET_NULL. We may want to have
KF_ACQUIRE imply KF_TRUSTED_ARGS _unless_ KF_RCU is specified, but that
can be left to another patch set, and there are no such subtleties to
address for KF_RELEASE.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230325213144.486885-4-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that we're not invoking kfunc destructors when the kptr in a map was
NULL, we no longer require NULL checks in many of our KF_RELEASE kfuncs.
This patch removes those NULL checks.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230325213144.486885-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix a crash when using NFS with krb5p
-----BEGIN PGP SIGNATURE-----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=FHAt
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix a crash when using NFS with krb5p
* tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix a crash in gss_krb5_checksum()
Expose nl80211_send_chandef functionality for mac80211_hwsim or vendor
netlink can use it where needed.
Signed-off-by: Jaewan Kim <jaewan@google.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/20230322131637.2633968-3-jaewan@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Generate EMA beacons, each including MBSSID and RNR elements at a given
index. If number of stored RNR elements is more than the number of
MBSSID elements then add those in every EMA beacon.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20230323113801.6903-3-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As per IEEE Std 802.11ax-2021, 11.1.3.8.3 Discovery of a nontransmitted
BSSID profile, an EMA AP that transmits a Beacon frame carrying a partial
list of nontransmitted BSSID profiles should include in the frame
a Reduced Neighbor Report element carrying information for at least the
nontransmitted BSSIDs that are not present in the Multiple BSSID element
carried in that frame.
Add new nested attribute NL80211_ATTR_EMA_RNR_ELEMS to support the above.
Number of RNR elements must be more than or equal to the number of
MBSSID elements. This attribute can be used only when EMA is enabled.
Userspace is responsible for splitting the RNR into multiple elements such
that each element excludes the non-transmitting profiles already included
in the MBSSID element (%NL80211_ATTR_MBSSID_ELEMS) at the same index.
Each EMA beacon will be generated by adding MBSSID and RNR elements
at the same index. If the userspace provides more RNR elements than the
number of MBSSID elements then these will be added in every EMA beacon.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20230323113801.6903-2-quic_alokad@quicinc.com
[Johannes: validate elements]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit fe4a6d2db3 ("wifi: mac80211: implement support for yet
another mesh A-MSDU format") expands amsdu_mesh_control list to
multi-line list. However, the expansion triggers Sphinx warning:
Documentation/driver-api/80211/mac80211-advanced:214: ./net/mac80211/sta_info.h:628: WARNING: Unexpected indentation.
Use bullet list instead to fix the warning.
Link: https://lore.kernel.org/linux-next/20230323141548.659479ef@canb.auug.org.au/
Fixes: fe4a6d2db3 ("wifi: mac80211: implement support for yet another mesh A-MSDU format")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch fixes typos in net/sched/* files.
Signed-off-by: Taichi Nishimura <awkrail01@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman
Florian Westphal
Jakub Kicinski
Jianfeng Tan
Ido Schimmel
Emeel Hakim
Xin Long
Leon Romanovsky
Johannes Berg
Mahesh Bandewar
Vladimir Oltean
Al Viro
Linus Torvalds
Yingsha Xu
Chuck Lever
Dai Ngo
Tzung-Bi Shih
Paolo Abeni
Pablo Neira Ayuso
Alexander Aring
Peter Zijlstra
Felix Fietkau
Daniel Borkmann
Pedro Tammela
Matthieu Baerts
Geliang Tang
David Vernet
Kevin Brodsky
Arseniy Krasnov
Gwangun Jung
Jesper Dangaard Brouer
Liang Chen
Eric Dumazet
David Howells
Kal Conley
Ziyang Xuan
Martin Willi
Christian Ehrig
Xin Liu
Kuniyuki Iwashima
Feng Zhou
Luis Chamberlain
Aloka Dixit
Luiz Augusto von Dentz
Claudia Draghicescu
Min Li
Felix Huettner
YueHaibing
Rob Herring
Sabrina Dubroca
Chen Aotian
Kirill A. Shutemov
Joel Fernandes (Google)
Uladzislau Rezki (Sony)
Oliver Hartkopp
Michal Sojka
Oleksij Rempel
Andy Roulin
Alexei Starovoitov
Jeff Layton
Sricharan Ramabadhran
Greg Kroah-Hartman
Zheng Wang
Ryder Lee
Andrea Righi
Bobby Eshleman
Davide Caratti
Paul Blakey
Eric Sage
Kieran Frewen
Tom Rix
Yixin Shen
Thomas Gleixner
Wangyang Guo
Martin KaFai Lau
Shay Agroskin
Ivan Orlov
Heiner Kallweit
Stefano Garzarella
Eric Van Hensbergen
Nuno Gonçalves
Jaewan Kim
Bagas Sanjaya
Taichi Nishimura