Граф коммитов

17 Коммитов

Автор SHA1 Сообщение Дата
Andreas Herrmann da7d3abe1c Revert "cpufreq: pcc-cpufreq: update default value of cpuinfo_transition_latency"
This reverts commit 790d849bf8.

Using a v4.7-rc7 kernel on a HP ProLiant triggered following messages

 pcc-cpufreq: (v1.10.00) driver loaded with frequency limits: 1200 MHz, 2800 MHz
 cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor

The last line was shown for each CPU in the system.
Testing v4.5 (where commit 790d849b was integrated) triggered
similar messages. Same behaviour on a 2nd HP Proliant system.

So commit 790d849bf (cpufreq: pcc-cpufreq: update default value of
cpuinfo_transition_latency) causes the system to use performance
governor which, I guess, was not the intention of the patch.

Enabling debug output in pcc-cpufreq provides following verbose output:

 pcc-cpufreq: (v1.10.00) driver loaded with frequency limits: 1200 MHz, 2800 MHz
 pcc_get_offset: for CPU 0: pcc_cpu_data input_offset: 0x44, pcc_cpu_data output_offset: 0x48
 init: policy->max is 2800000, policy->min is 1200000
 get: get_freq for CPU 0
 get: SUCCESS: (virtual) output_offset for cpu 0 is 0xffffc9000d7c0048, contains a value of: 0xff06. Speed is: 168000 MHz
 cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor
 target: CPU 0 should go to target freq: 2800000 (virtual) input_offset is 0xffffc9000d7c0044
 target: was SUCCESSFUL for cpu 0

I am asking to revert 790d849bf to re-enable usage of ondemand
governor with pcc-cpufreq.

Fixes: 790d849bf (cpufreq: pcc-cpufreq: update default value of cpuinfo_transition_latency)
CC: <stable@vger.kernel.org> # 4.5+
Signed-off-by: Andreas Herrmann <aherrmann@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-22 23:51:06 +02:00
Mike Galbraith 3c67a829bd cpufreq: pcc-cpufreq: Fix doorbell.access_width
Commit 920de6ebfa (ACPICA: Hardware: Enhance
acpi_hw_validate_register() with access_width/bit_offset awareness)
apparently exposed a latent bug, doorbell.access_width is initialized
to 64, but per Lv Zheng, it should be 4, and indeed, making that
change does bring pcc-cpufreq back to life.

Fixes: 920de6ebfa (ACPICA: Hardware: Enhance acpi_hw_validate_register() with access_width/bit_offset awareness)
Suggested-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-23 23:09:51 +02:00
Jacob Tanenbaum 790d849bf8 cpufreq: pcc-cpufreq: update default value of cpuinfo_transition_latency
The cpufreq documentation specifies

policy->cpuinfo.transition_latency   the time it takes on this CPU to
                                switch between two frequencies in
                                nanoseconds (if appropriate, else
                                specify CPUFREQ_ETERNAL)

currently pcc-cpufreq does not expose the value and sets it to zero. I
changed the pcc-cpufreq driver and it's documentation to conform to the
default value specified in Documentation/cpu-freq/cpu-drivers.txt

Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-10 00:17:03 +01:00
Lenny Szubowicz 7e7e8fe698 cpufreq: pcc: Enable autoload of pcc-cpufreq for ACPI processors
The pcc-cpufreq driver is not automatically loaded on systems where
the platform's power management setting requires this driver.
Instead, on those systems no CPU frequency driver is registered and
active.

Make the autoloading matching criteria for loading the pcc-cpufreq
driver the same as done in acpi-cpufreq by commit c655affbd5
("ACPI / cpufreq: Add ACPI processor device IDs to acpi-cpufreq").

x86 CPU frequency drivers are now typically autoloaded by specifying
MODULE_DEVICE_TABLE entries and x86cpu model specific matching.
But pcc-cpufreq was omitted when acpi-cpufreq and other drivers were
changed to use this approach.

Both acpi-cpufreq and pcc-cpufreq depend on a distinct and mutually
exclusive set of ACPI methods which are not directly tied to specific
processor model numbers. Both of these drivers have init routines
which look for their required ACPI methods. As a result, only the
appropriate driver registers as the cpu frequency driver and the other
one ends up being unloaded.

Tested on various systems where acpi-cpufreq, intel_pstate, and
pcc-cpufreq are the expected cpu frequency drivers.

Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: Joseph Szczypek <joseph.szczypek@hp.com>
Reported-by: Trinh Dao <trinh.dao@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-14 00:16:25 +01:00
Rafael J. Wysocki e65b5ddba8 cpufreq: pcc-cpufreq: Fix wait_event() under spinlock
Fix the following bug introduced by commit 8fec051eea (cpufreq:
Convert existing drivers to use cpufreq_freq_transition_{begin|end})
that forgot to move the spin_lock() in pcc_cpufreq_target() past
cpufreq_freq_transition_begin() which calls wait_event():

BUG: sleeping function called from invalid context at drivers/cpufreq/cpufreq.c:370
in_atomic(): 1, irqs_disabled(): 0, pid: 2636, name: modprobe
Preemption disabled at:[<ffffffffa04d74d7>] pcc_cpufreq_target+0x27/0x200 [pcc_cpufreq]
[   51.025044]
CPU: 57 PID: 2636 Comm: modprobe Tainted: G            E  3.17.0-default #7
Hardware name: Hewlett-Packard ProLiant DL980 G7, BIOS P66 07/07/2010
 00000000ffffffff ffff88026c46b828 ffffffff81589dbd 0000000000000000
 ffff880037978090 ffff88026c46b848 ffffffff8108e1df ffff880037978090
 0000000000000000 ffff88026c46b878 ffffffff8108e298 ffff88026d73ec00
Call Trace:
 [<ffffffff81589dbd>] dump_stack+0x4d/0x90
 [<ffffffff8108e1df>] ___might_sleep+0x10f/0x180
 [<ffffffff8108e298>] __might_sleep+0x48/0xd0
 [<ffffffff8145b905>] cpufreq_freq_transition_begin+0x75/0x140 drivers/cpufreq/cpufreq.c:370 wait_event(policy->transition_wait, !policy->transition_ongoing);
 [<ffffffff8108fc99>] ? preempt_count_add+0xb9/0xc0
 [<ffffffffa04d7513>] pcc_cpufreq_target+0x63/0x200 [pcc_cpufreq] drivers/cpufreq/pcc-cpufreq.c:207 spin_lock(&pcc_lock);
 [<ffffffff810e0d0f>] ? update_ts_time_stats+0x7f/0xb0
 [<ffffffff8145be55>] __cpufreq_driver_target+0x85/0x170
 [<ffffffff8145e4c8>] od_check_cpu+0xa8/0xb0
 [<ffffffff8145ef10>] dbs_check_cpu+0x180/0x1d0
 [<ffffffff8145f310>] cpufreq_governor_dbs+0x3b0/0x720
 [<ffffffff8145ebe3>] od_cpufreq_governor_dbs+0x33/0xe0
 [<ffffffff814593d9>] __cpufreq_governor+0xa9/0x210
 [<ffffffff81459fb2>] cpufreq_set_policy+0x1e2/0x2e0
 [<ffffffff8145a6cc>] cpufreq_init_policy+0x8c/0x110
 [<ffffffff8145c9a0>] ? cpufreq_update_policy+0x1b0/0x1b0
 [<ffffffff8108fb99>] ? preempt_count_sub+0xb9/0x100
 [<ffffffff8145c6c6>] __cpufreq_add_dev+0x596/0x6b0
 [<ffffffffa016c608>] ? pcc_cpufreq_probe+0x4b4/0x4b4 [pcc_cpufreq]
 [<ffffffff8145c7ee>] cpufreq_add_dev+0xe/0x10
 [<ffffffff81408e81>] subsys_interface_register+0xc1/0xf0
 [<ffffffff8108fb99>] ? preempt_count_sub+0xb9/0x100
 [<ffffffff8145b3d7>] cpufreq_register_driver+0x117/0x2a0
 [<ffffffffa016c65d>] pcc_cpufreq_init+0x55/0x9f8 [pcc_cpufreq]
 [<ffffffffa016c608>] ? pcc_cpufreq_probe+0x4b4/0x4b4 [pcc_cpufreq]
 [<ffffffff81000298>] do_one_initcall+0xc8/0x1f0
 [<ffffffff811a731d>] ? __vunmap+0x9d/0x100
 [<ffffffff810eb9a0>] do_init_module+0x30/0x1b0
 [<ffffffff810edfa6>] load_module+0x686/0x710
 [<ffffffff810ebb20>] ? do_init_module+0x1b0/0x1b0
 [<ffffffff810ee1db>] SyS_init_module+0x9b/0xc0
 [<ffffffff8158f7a9>] system_call_fastpath+0x16/0x1b

Fixes: 8fec051eea (cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end})
Reported-and-tested-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-29 15:35:50 +02:00
Viresh Kumar 8fec051eea cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end}
CPUFreq core has new infrastructure that would guarantee serialized calls to
target() or target_index() callbacks. These are called
cpufreq_freq_transition_begin() and cpufreq_freq_transition_end().

This patch converts existing drivers to use these new set of routines.

Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-26 16:41:41 +01:00
Viresh Kumar ab1b1c4e82 cpufreq: send new set of notification for transition failures
In the current code, if we fail during a frequency transition, we
simply send the POSTCHANGE notification with the old frequency. This
isn't enough.

One of the core users of these notifications is the code responsible
for keeping loops_per_jiffy aligned with frequency changes. And mostly
it is written as:

	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)) {
		update-loops-per-jiffy...
	}

So, suppose we are changing to a higher frequency and failed during
transition, then following will happen:
- CPUFREQ_PRECHANGE notification with freq-new > freq-old
- CPUFREQ_POSTCHANGE notification with freq-new == freq-old

The first one will update loops_per_jiffy and second one will do
nothing. Even if we send the 2nd notification by exchanging values of
freq-new and old, some users of these notifications might get
unstable.

This can be fixed by simply calling cpufreq_notify_post_transition()
with error code and this routine will take care of sending
notifications in the correct order.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[rjw: Folded 3 patches into one, rebased unicore2 changes]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-06 01:43:44 +01:00
Rafael J. Wysocki 93658cb859 Merge branch 'pm-cpufreq'
* pm-cpufreq: (167 commits)
  cpufreq: create per policy rwsem instead of per CPU cpu_policy_rwsem
  intel_pstate: Add Baytrail support
  intel_pstate: Refactor driver to support CPUs with different MSR layouts
  cpufreq: Implement light weight ->target_index() routine
  PM / OPP: rename header to linux/pm_opp.h
  PM / OPP: rename data structures to dev_pm equivalents
  PM / OPP: rename functions to dev_pm_opp*
  cpufreq / governor: Remove fossil comment
  cpufreq: exynos4210: Use the common clock framework to set APLL clock rate
  cpufreq: exynos4x12: Use the common clock framework to set APLL clock rate
  cpufreq: Detect spurious invocations of update_policy_cpu()
  cpufreq: pmac64: enable cpufreq on iMac G5 (iSight) model
  cpufreq: pmac64: provide cpufreq transition latency for older G5 models
  cpufreq: pmac64: speed up frequency switch
  cpufreq: highbank-cpufreq: Enable Midway/ECX-2000
  exynos-cpufreq: fix false return check from "regulator_set_voltage"
  speedstep-centrino: Remove unnecessary braces
  acpi-cpufreq: Add comment under ACPI_ADR_SPACE_SYSTEM_IO case
  cpufreq: arm-big-little: use clk_get instead of clk_get_sys
  cpufreq: exynos: Show a list of available frequencies
  ...

Conflicts:
	drivers/devfreq/exynos/exynos5_bus.c
2013-10-28 01:29:34 +01:00
Viresh Kumar 6b67ca322d cpufreq: pcc: don't initialize part of policy set by core
Many common initializations of struct policy are moved to core now and hence
this driver doesn't need to do it. This patch removes such code.

Most recent of those changes is to call ->get() in the core after calling
->init().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-16 00:50:31 +02:00
Viresh Kumar be49e3465f cpufreq: add new routine cpufreq_verify_within_cpu_limits()
Most of the users of cpufreq_verify_within_limits() calls it for
limiting with min/max from policy->cpuinfo. We can make that code
simple by introducing another routine which will do this for them
automatically.

This patch adds another routine cpufreq_verify_within_cpu_limits()
and updates others to use it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-16 00:50:23 +02:00
Zhang Rui 7ca9b57491 pcc_freq: convert acpi_get_handle() to acpi_has_method()
acpi_has_method() is a new ACPI API introduced to check
the existence of an ACPI control method.

It can be used to replace acpi_get_handle() in the case that
1. the calling function doesn't need the ACPI handle of the control method.
and
2. the calling function doesn't care the reason why the method is unavailable.

Convert acpi_get_handle() to acpi_has_method()
in drivers/cpufreq/pcc_freq.c in this patch.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-24 01:37:55 +02:00
Viresh Kumar adc97d6a73 cpufreq: Drop the owner field from struct cpufreq_driver
We don't need to set .owner = THIS_MODULE any more in cpufreq drivers
as this field isn't used any more by the cpufreq core.

This patch removes it and updates all dependent drivers accordingly.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-10 03:24:47 +02:00
Viresh Kumar f77f146599 cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases
PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e
either both should be called or both shouldn't be.

In case we have started PRECHANGE notifier and found an error, we
must call POSTCHANGE notifier with freqs.new = freqs.old to guarantee
that the sequence of calling notifiers is complete.

This patch fixes it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-24 13:26:39 +02:00
Viresh Kumar b43a7ffbf3 cpufreq: Notify all policy->cpus in cpufreq_notify_transition()
policy->cpus contains all online cpus that have single shared clock line. And
their frequencies are always updated together.

Many SMP system's cpufreq drivers take care of this in individual drivers but
the best place for this code is in cpufreq core.

This patch modifies cpufreq_notify_transition() to notify frequency change for
all cpus in policy->cpus and hence updates all users of this API.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-02 15:24:00 +02:00
Julia Lawall d06a8a4fe7 drivers/cpufreq/pcc-cpufreq.c: fix error return code
Convert a 0 error return code to a negative one, as returned elsewhere in the
function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret;
expression e,e1,e2,e3,e4,x;
@@

(
if (\(ret != 0\|ret < 0\) || ...) { ... return ...; }
|
ret = 0
)
... when != ret = e1
*x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...);
... when != x = e2
    when != ret = e3
*if (x == NULL || ...)
{
  ... when != ret = e4
*  return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-08-08 20:49:25 +02:00
Naga Chumbalkar e71f5cc402 drivers/cpufreq/pcc-cpufreq.c: avoid NULL pointer dereference
per_cpu(processors, n) can be NULL, resulting in:

  Loading CPUFreq modules[  437.661360] BUG: unable to handle kernel NULL pointer dereference at (null)
  IP: [<ffffffffa0434314>] pcc_cpufreq_cpu_init+0x74/0x220 [pcc_cpufreq]

It's better to avoid the oops by failing the driver, and allowing the
system to boot.

Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Len Brown <lenb@kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-14 18:09:38 -07:00
Dave Jones bb0a56ecc4 [CPUFREQ] Move x86 drivers to drivers/cpufreq/
Signed-off-by: Dave Jones <davej@redhat.com>
2011-05-19 18:51:07 -04:00