Граф коммитов

44 Коммитов

Автор SHA1 Сообщение Дата
Kim Kyuwon 0b56129be7 leds: add BD2802GU LED driver
ROHM BD2802GU is a RGB LED controller attached to i2c bus and specifically
engineered for decoration purposes.  This RGB controller incorporates
lighting patterns and illuminates.

This driver is designed to minimize power consumption, so when there is no
emitting LED, it enters to reset state.  And because the BD2802GU has lots
of features that can't be covered by the current LED framework, it
provides Advanced Configuration Function(ADF) mode, so that user
applications can set registers of BD2802GU directly.

Here are basic usage examples :
; to turn on LED (not blink)
$ echo 1 > /sys/class/leds/led1_R/brightness
; to blink LED
$ echo timer > /sys/class/leds/led1_R/trigger
$ echo 1 > /sys/class/leds/led1_R/delay_on
$ echo 1 > /sys/class/leds/led1_R/delay_off
; to turn off LED
$ echo 0 > /sys/class/leds/led1_R/brightness

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Kim Kyuwon <chammoru@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06 16:06:26 +01:00
Felipe Balbi 17354bfe85 leds: Add gpio-led trigger
The gpio led trigger will allow leds to be triggered by
gpio events.

When we give the led a gpio number, the trigger will
request_irq() on that so we don't have to keep polling
for gpio state.

It's useful for usecases as n810's keypad leds that could
be triggered by the gpio event generated when user slides
up to show the keypad.

We also provide means for userland to tell us what is the
desired brightness for that special led when it goes on
so userland could use information from ambient light sensors
and not set led brightness too high if it's not necessary.

Signed-off-by: Felipe Balbi <me@felipebalbi.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06 16:06:26 +01:00
Phil Sutter ac67e23bed leds: Add rb532 LED driver for the User LED
Mikrotik built six LEDs into the Routerboard 532, from which one is
destined for custom use, the so called "User LED". This patch adds a
driver for it, based on the LEDs class.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06 16:06:26 +01:00
Luotao Fu 41c42ff5db leds: simple driver for pwm driven LEDs
Add a simple driver for pwm driver LEDs.  pwm_id and period can be defined
in board file.  It is developed for pxa, however it is probably generic
enough to be used on other platforms with pwm.

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06 16:06:26 +01:00
Guennadi Liakhovetski ac2dd0f110 leds: Add dac124s085 driver
Add an LED driver using the DAC124S085 DAC from NatSemi

[randy.dunlap@oracle.com: use header files for interfaces]
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06 16:06:25 +01:00
Eric Piel 9e0c797821 lis3lv02d: merge with leds hp disk
Move the second part of the HP laptop disk protection functionality (a red
led) to the same driver.  From a purely Linux developer's point of view,
the led and the accelerometer have nothing related.  However, they
correspond to the same ACPI functionality, and so will always be used
together, moreover as they share the same ACPI PNP alias, there is no
other simple to allow to have same loaded at the same time if they are not
in the same module.  Also make it requires the led class to compile and
update the Kconfig text.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 16:39:40 -08:00
Mark Brown 0081e8020e leds: Add WM8350 LED driver
The voltage and current regulators on the WM8350 AudioPlus PMIC can be
used in concert to provide a power efficient LED driver.  This driver
implements support for this within the standard LED class.

Platform initialisation code should configure the LED hardware in the
init callback provided by the WM8350 core driver.  The callback should
use wm8350_isink_set_flash(), wm8350_dcdc25_set_mode() and
wm8350_dcdc_set_slot() to configure the operating parameters of the
regulators for their hardware and then then use wm8350_register_led() to
instantiate the LED driver.

This driver was originally written by Liam Girdwood, though it has been
extensively modified since then.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 12:38:58 +00:00
Constantin Baranov ec9a943ce9 leds: ALIX.2 LEDs driver
Driver for PC Engines ALIX.2 and ALIX.3 LEDs.

Signed-off-by: Constantin Baranov <const@mimas.ru>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08 12:38:57 +00:00
Pavel Machek 9c78ff6e65 leds: Add driver for HP harddisk protection LEDs
HP notebooks contain accelerometer-based disk protection subsystem,
and LED that indicates hard disk is protected. This is driver for the
LED part.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-20 23:02:43 +01:00
Richard Purdie 85b064b664 leds: Remove uneeded leds-cm-x270 driver
The cm-x270 board uses leds-gpio so remove the now unneeded driver.

Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-20 22:55:00 +01:00
Rodolfo Giometti 132e9306be leds: Add backlight LED trigger
This allows LEDs to be controlled as a backlight device where
they turn off and on when the display is blanked and unblanked.
This is useful where you need various key backlight LEDs to
dim at the same time as the backlight.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-20 22:34:12 +01:00
Mike Rapoport 9e84561c8c leds: da903x: Add support for LEDs found on DA9030/DA9034
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-20 22:34:11 +01:00
David S. Miller 56c5d900db Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	sound/core/memalloc.c
2008-10-11 12:39:35 -07:00
Eric Miao 4fe3224fff [ARM] pxa/spitz: use leds-gpio for led driving and drop leds-spitz
Now as the scoop pins are covered by the generic gpio API,
we can use leds-gpio driver instead of special leds-spitz

Drop leds-spitz.c and the declarations of now un-referenced
spitzscoop_device, spitzscoop2_device.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23 22:04:40 +01:00
Eric Miao 60cf711d47 [ARM] pxa/corgi: use leds-gpio for led driving and drop leds-corgi
Now as the scoop pins are covered by the generic gpio API,
we can use leds-gpio driver instead of special leds-corgi

Drop leds-corgi.c and remove the declaration of now un-referenced
corgiscoop_device.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23 22:04:39 +01:00
David S. Miller 5843492ccc leds: Add driver for Sunfire UltraSPARC server LEDs.
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-31 20:26:48 -07:00
Nate Case f46e9203d9 leds: Add support for Philips PCA955x I2C LED drivers
This driver supports the PCA9550, PCA9551, PCA9552, and PCA9553
LED driver chips.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-07-23 09:49:56 +01:00
Riku Voipio e14fa82439 leds: Add pca9532 led driver
NXP pca9532 is a LED dimmer/controller attached to i2c bus.  It allows
attaching upto 16 leds which can either be on, off or dimmed and/or blinked
with the two PWM modulators available.

This driver is a "new-style" i2c driver that adheres to the driver model and
implements the led framework api.  Since the leds connected to the driver are
platform specific, it is only useful when platform data is passed to the
driver to define what leds are connected to which pins.

Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-07-23 09:49:56 +01:00
Nick Forbes 060856c799 leds: Add default-on trigger
Add a trigger which allows LEDs to default to the full
brightness state.

Signed-off-by: Nick Forbes <Nick.Forbes@huntsworth.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-25 00:06:52 +01:00
Rod Whitby 3b2e46f8c4 leds: Add new driver for the LEDs on the Freecom FSG-3
The LEDs on the Freecom FSG-3 are connected to an external
memory-mapped latch on the ixp4xx expansion bus, and therefore cannot
be supported by any of the existing LEDs drivers.

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-04-24 23:43:09 +01:00
Dmitry Baryshkov 507012f0a5 [ARM] 4974/1: Drop unused leds-tosa.
As now tosa uses leds-gpio, drop leds-tosa driver.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:09 +01:00
David Brownell de5c9edee7 PWM LED driver
This is a LED driver using the PWM on newer SOCs from Atmel; brightness is
controlled by changing the PWM duty cycle.  So for example if you've set up
two leds labeled "pwm0" and "pwm1":

	echo 0 > /sys/class/leds/pwm2/brightness	# off (0%)
	echo 80 > /sys/class/leds/pwm2/brightness
	echo 255 > /sys/class/leds/pwm2/brightness	# on (100%)

Note that "brightness" here isn't linear; maybe that should change.  Going
from 4 to 8 probably doubles perceived brightness, while 244 to 248 is
imperceptible.

This is mostly intended to be a simple example of PWM, although it's
realistic since LCD backlights are often driven with PWM to conserve
battery power (and offer brightness options).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:38 -08:00
Kristoffer Ericson d39a7a63eb leds: Add HP Jornada 6xx driver
Add support for the LEDs on the HP Jornada 620/660/680/690 devices.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 10:10:28 +00:00
Rod Whitby 8fe217e7b6 leds: Remove the now uneeded ixp4xx driver
All boards using the IXP4XX-GPIO-LED driver have been updated to use
the generic leds-gpio driver instead.

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 10:02:39 +00:00
Márton Németh cec035de82 leds: Add clevo notebook LED driver
The driver supports the mail LED commonly found on different Clevo notebooks.
The driver access the LED through the i8042 hardware which is handled by
the input subsystem.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07 09:22:17 +00:00
Mike Rapoport 3696a8a426 [ARM] 4576/1: CM-X270 machine support
This patch provides core support for CM-X270 platform.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15 18:53:57 +01:00
Yoichi Yuasa 97da7aaf46 leds: Add Cobalt Raq series LEDs support
Add Cobalt Raq series LEDs support.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11 22:24:00 +01:00
Yoichi Yuasa f3b6b6cd00 leds: Rename leds-cobalt driver
The leds-cobalt driver only supports the Coable Qube series
(not included in Cobalt Raq series).
Rename the driver and update Kconfig/Makefile.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11 22:24:00 +01:00
Raphael Assenat 22e03f3b58 leds: Add generic GPIO LED driver
This patch adds support for GPIO connected leds via the new GPIO framework.

Information about leds (gpio, polarity, name, default trigger) is passed
to the driver via platform_data.

Signed-off-by: Raphael Assenat <raph@8d.com>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-07-16 01:15:50 +01:00
Florian Fainelli 2fea6f35c3 leds: Add support for Cobalt Server front LED
Add support for Cobalt Server front LED (MIPS)

Signed-off-by: Florian Fainell <florian.fainelli@int-evry.fr>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-15 21:37:29 +00:00
Arnaud Patard bd4009af48 leds: Add IPAQ h1940 LEDs support
This patch adds the support for the IPAQ h1940 leds.

In order to create the amber led (used for the battery charging), the red and
green leds are set to the same default trigger. Due to hardware limitations,
the blue led can only be set in blinking mode.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-15 21:36:19 +00:00
Kristian Kielhofner 0d75565f1e [PATCH] PCEngines WRAP LED Support
A driver for the PCEngines WRAP boards (http://www.pcengines.ch), which are
very similar to the Soekris net4801 (same NS SC1100 geode reference
design).

The LEDs on the WRAP are on different GPIO lines and I have modified and
copied the net48xx error led support for this.  It also includes support
for an "extra" led (in addition to error).  The three LEDs on the WRAP are
at GPIO lines 2,3,18 (WRAP LEDs from left to right).  This driver gives
access to the second and third LEDs by twiddling GPIO lines 3 & 18.

Because these boards are so similar to the net48xx, I basically sed-ed that
driver to form the basis for leds-wrap.c.  The only changes from
leds-net48xx.c are:

 - #define WRAP_EXTRA_LED_GPIO

 - name changes

 - duplicate relevant sections to provide support for the "extra" led

 - reverse the various *_led_set values.  The WRAP is "backwards" from the
   net48xx, and these needed to be updated for that.

[akpm@osdl.org: build fix]
Signed-off-by: Kristian Kielhofner <kris@krisk.org>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:36 -08:00
Chris Boot 1a87d9425e [PATCH] LED Class support for Soekris net48xx
Add LED Class device support for the Soekris net48xx Error LED.  Tested
only on a net4801, but should work on a net4826 as well.  I'd love to find
a way of detecting a Soekris net48xx device but there is no DMI or any
Soekris-specific PCI devices.

[akpm@osdl.org: fixlets, cleanups]
Signed-off-by: Chris Boot <bootc@bootc.net>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:26 -07:00
Atsushi Nemoto 891c668b90 [PATCH] LED: add LED heartbeat trigger
Add an LED trigger acts like a heart beat.  This can be used as a
replacement of CONFIG_HEARTBEAT code exists in some arch's timer code.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Cc: "Nish Aravamudan" <nish.aravamudan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:01:23 -07:00
Jonathan McDowell 9becde79d2 [PATCH] leds: Amstrad Delta LED support
Use the new LED infrastructure to support the 6 LEDs present on the Amstrad
Delta.

[akpm@osdl.org: cleanup]
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Ackde-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Ben Dooks <ben@fluff.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:05 -07:00
Ben Dooks 54bdc47010 [PATCH] S3C24XX GPIO LED support
GPIO LED support for Samsung S3C24XX SoC series processors.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:40 -07:00
Richard Purdie 2bfb646cdf [PATCH] LED: Add IDE disk activity LED trigger
Add an LED trigger for IDE disk activity to the ide-disk driver.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Dirk Opfer 6d0cf3e048 [PATCH] LED: add device support for tosa
Adds LED drivers for LEDs found on the Sharp Zaurus c6000 model (tosa).

Signed-off-by: Dirk Opfer <dirk@opfer-online.de>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
John Bowler 6a0c51bfce [PATCH] LED: add LED device support for ixp4xx devices
NEW_LEDS support for ixp4xx boards where LEDs are connected to the GPIO lines.

This includes a new generic ixp4xx driver (leds-ixp4xx-gpio.c name
"IXP4XX-GPIO-LED")

Signed-off-by: John Bowler <jbowler@acm.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Richard Purdie 4d3cb35476 [PATCH] LED: add LED device support for locomo devices
Adds an LED driver for LEDs exported by the Sharp LOCOMO chip as found on some
models of Sharp Zaurus.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Richard Purdie 3179108daa [PATCH] LED: add LED device support for the zaurus corgi and spitz models
Adds LED drivers for LEDs found on the Sharp Zaurus c7x0 (corgi, shepherd,
husky) and cxx00 (akita, spitz, borzoi) models.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Richard Purdie 6655c6fe57 [PATCH] LED: add LED timer trigger
Add an example of a complex LED trigger in the form of a generic timer which
triggers the LED its attached to at a user specified frequency and duty cycle.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:57 -08:00
Richard Purdie c3bc9956ec [PATCH] LED: add LED trigger tupport
Add support for LED triggers to the LED subsystem.  "Triggers" are events
which change the state of an LED.  Two kinds of trigger are available, simple
ones which can be added to exising code with minimum disruption and complex
ones for implementing new or more complex functionality.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:56 -08:00
Richard Purdie c72a1d608d [PATCH] LED: add LED class
Add the foundations of a new LEDs subsystem.  This patch adds a class which
presents LED devices within sysfs and allows their brightness to be
controlled.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:56 -08:00