Граф коммитов

17 Коммитов

Автор SHA1 Сообщение Дата
Dmitry Eremin-Solenikov c0f589502e powerpc/85xx: specify interrupt for pq3-localbus devices
fsl-lbc driver requires an interrupt to bind to localbus device.
Populate 85xx boards' dts trees with lbc interrupt info.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-27 08:31:12 -05:00
Dmitry Eremin-Solenikov 67e64f4aee powerpc/85xx: tqm8540 - add description for onboard flash
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-27 08:31:11 -05:00
Dmitry Eremin-Solenikov 07c638398f powerpc/tqm85xx: update PCI interrupt-map attribute
Update PCI IRQ mapping on TQM85xx platforms: include INTC and INTD on PCI-X
slot and add INTA/INTB mapping for PCMCIA bridge.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-04 14:21:10 -05:00
Kumar Gala b1b6802586 powerpc/fsl: Removed reg property from 85xx/86xx soc node
Between the addition of the ecm/mcm law nodes and the fact that the
get_immrbase() has been using the range property of the SoC to determine
the base address of CCSR space we no longer need the reg property at
the soc node level.  It has been ill specified and varied between device
trees to cover either the {e,m}cm-law node, some odd subset of CCSR
space or all of CCSR space.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:29 -05:00
Kumar Gala e1a2289736 powerpc/85xx: Add new LAW & ECM device tree nodes for all 85xx systems
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:19 -05:00
Kumar Gala 28eac2b74c powerpc/fsl: Remove cell-index from PCI nodes
The cell-index property isn't used on PCI nodes and is ill defined.
Remove it for now and if someone comes up with a good reason and
consistent definition for it we can add it back

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:14 -05:00
Wolfgang Grandegger 6467cae318 powerpc/85xx: TQM85xx: correct address of LM75 I2C device nodes
Commit 0f73a449a6 added I2C device nodes
for the LM75 thermal sensor on the TQM85xx modules, unfortunately with
the wrong I2C address. The LM75s are located at address 0x48.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-07 01:36:32 -05:00
Kumar Gala fe671772ab powerpc/85xx: Use fsl,mpc85.. as prefix for memory ctrl & l2-cache nodes
Older devices tree's used "fsl,85.." instead of the preferred
"fsl,mpc85.." for the memory controller & l2 cache controller nodes.
The EDAC code is the only use of these and has been updated for some
time to support both "fsl,85.." and "fsl,mpc85.."

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-31 08:46:25 -05:00
Anton Vorontsov 84ba4a5899 powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes
Currently it doesn't matter where the mdio nodes are placed, but with
power management support (i.e. when sleep = <> properties will take
effect), mdio nodes placement will become important: mdio controller
is a part of the ethernet block, so the mdio nodes should be placed
correctly. Otherwise we may wrongly assume that MDIO controllers are
available during sleep.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24 08:35:13 -05:00
Wolfgang Grandegger 0f73a449a6 powerpc/85xx: TQM85xx - add i2c device nodes for LM75
Automatic I2C device probing is not done any more. Therefore we need
proper DTS device node definitions for the I2C LM75 thermal sensor on
the TQM85xx modules.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-02 09:40:59 -06:00
Andy Fleming b31a1d8b41 gianfar: Convert gianfar to an of_platform_driver
Does the same for the accompanying MDIO driver, and then modifies the TBI
configuration method.  The old way used fields in einfo, which no longer
exists.  The new way is to create an MDIO device-tree node for each instance
of gianfar, and create a tbi-handle property to associate ethernet controllers
with the TBI PHYs they are connected to.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 15:29:15 -08:00
Kumar Gala dee805532a powerpc: Add dma nodes to 83xx, 85xx and 86xx boards
Added DMA nodes for the elo/elo-plus DMA engines.

Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that
its the same as all the other boards.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-27 16:04:29 -05:00
Wolfgang Grandegger 4fb035f69e powerpc/85xx: correct vendor prefix in DTS files for TQM85xx modules
Like for the TQM5200, the vendor prefix "tqc," is now used for all
TQM85xx modules from TQ-Components GmbH (http://www.tqc.de) in the
corresponding DTS files.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10 10:33:11 -05:00
Kumar Gala c054065bc1 [POWERPC] 85xx: Add next-level-cache property
Added next-level-cache to the L1 and a reference to the new L2 label.
This is per the ePAPR 0.94 spec.  Since we are't really dependent on this
today we aren't supporting the "legacy" l2-cache phandle that is specified
in the PPC v2.1 OF Binding spec.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-02 14:44:25 -05:00
Kumar Gala acd4b715ec [POWERPC] Cleanup mpic nodes in .dts
Removed clock-frequency, big-endian, and built-in props as they aren't
specified anywhere.  Also added compatible = "chrp,open-pic" in the
places it was missing.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-02 14:44:25 -05:00
Kumar Gala f67be814ff [POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx
* "simple-bus" covers all our needs for of_platform_bus_probe()
* make device tree name just 'soc' not 'soc85..'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:32:53 -06:00
Kumar Gala 0052bc5d5c [POWERPC] 85xx: Port TQM85xx boards over from arch/ppc
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27 14:10:37 -06:00