Граф коммитов

43 Коммитов

Автор SHA1 Сообщение Дата
kbuild test robot 56ec311fdd fsi: fsi_master_class can be static
There are no users outside of this file.

Fixes: 0604d53d4da8 ("fsi: Add fsi-master class")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-7-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08 11:23:40 +01:00
Andrew Jeffery 9f4c2b516b fsi: core: Fix small accesses and unaligned offsets via sysfs
Subtracting the offset delta from four-byte alignment lead to wrapping
of the requested length where `count` is less than `off`. Generalise the
length handling to enable and optimise aligned access sizes for all
offset and size combinations. The new formula produces the following
results for given offset and count values:

    offset  count | length
    --------------+-------
    0       1     | 1
    0       2     | 2
    0       3     | 2
    0       4     | 4
    0       5     | 4
    1       1     | 1
    1       2     | 1
    1       3     | 1
    1       4     | 1
    1       5     | 1
    2       1     | 1
    2       2     | 2
    2       3     | 2
    2       4     | 2
    2       5     | 2
    3       1     | 1
    3       2     | 1
    3       3     | 1
    3       4     | 1
    3       5     | 1

We might need something like this for the cfam chardevs as well, for
example we don't currently implement any alignment restrictions /
handling in the hardware master driver.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-6-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08 11:23:40 +01:00
Jeremy Kerr cf700ba035 fsi: Move master attributes to fsi-master class
Populate fsi_master_class->dev_attrs with the existing attribute
definitions, so we don't need to explicitly register.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-3-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08 11:23:16 +01:00
Jeremy Kerr 2e32c2d675 fsi: Add fsi-master class
This change adds a device class for FSI masters, allowing access under
/sys/class/fsi-master/, and easier udev rules.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20191108051945.7109-2-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08 11:23:07 +01:00
Greg Kroah-Hartman b9b667a0c7 FSI changes for 5.3
- Add MAINTAINERS entry. There is now a git tree and a mailing
  list/patchwork for collecting FSI patches
 
  - Bug fix for error driver registration error paths
 
  - Correction for the OCC hwmon driver to meet the spec
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAl0cIIIACgkQa3ZZB4FH
 cJ6z0A//Qy3eu/+s01kq8BAThP77QRyoQP+D7oMoGpr2KxK+82MtFwsuX/vLpcsu
 rYTLn+2xPzY+dWCQx6nWaIij/dkPDWikVarW2+fdMrLhk76XwwkVXPD4J4lUHtVx
 juTWPxLmo7ZAxtwMHyE86hjLR1oTmwZ/arnXYojQ2dka1CZxqpEo7YkRPBLkGjU7
 EcXuCcIGl5ETB9drVsdA8lArLFdgfL/ZFYyEF0epc9KgYrGvJdu1ZdT6bzJkn6C3
 rkCKzQF6fZdszNpo92mjUhkyP3MnnrSVdQPRb/D5wfY9EApfj1YRWS5ikts2lrEf
 tNBat9KJ5nn2AX8FUEKuJazks5ddQk5GOLw6U4vgVayQ0gL8HqofiqybvzKvpX0S
 B0ey0u2d+GeMwiNR+QUNgrnqbbbqy9rLaW8p4zfB70v5qOP8BfWQqnSq+utSqIWZ
 M7xKcial5vQqnBTz0pw+CXVZc0SPD0O7DaK1BmCVOumMAO746eNCPQEwIQVl3Fjt
 FW00qPDWrLnRfdusBWB5mky8b79cnfLht+hLh82gFEeSXpHsRx6rG5luT7moasSK
 EmbXcMM13iVznQk+2IVWWeAXdSDo0yA0eW1SBNBHdrUrdp6jW5pLbDb/F8s+jwQK
 rNYE4IwZYM34L+E/CsFQZw3o5XQy0fsEv6/0tFjjiQPwLeZJZzI=
 =3yOz
 -----END PGP SIGNATURE-----

Merge tag 'fsi-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next

Joel writes:

FSI changes for 5.3

 - Add MAINTAINERS entry. There is now a git tree and a mailing
 list/patchwork for collecting FSI patches

 - Bug fix for error driver registration error paths

 - Correction for the OCC hwmon driver to meet the spec

* tag 'fsi-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi:
  fsi/core: Fix error paths on CFAM init
  OCC: FSI and hwmon: Add sequence numbering
  MAINTAINERS: Add FSI subsystem
2019-07-03 09:21:25 +02:00
Jeremy Kerr 371975b0b0 fsi/core: Fix error paths on CFAM init
Change d1dcd67825 re-worked the struct fsi_slave initialisation in
fsi_slave_init, but introduced a few inconsitencies: the slave->dev is
now registered through cdev_device_add, but we may kfree() the device
out from underneath the cdev registration. We may also leave an IDA
allocated.

This change fixes the error paths, so that we kfree() only before the
device is registered with the core code. We also move the smode write to
before we start creating proper devices, as it's the most likely to
fail. We also remove the IDA-allocated minor on error, and properly
clean up the of_node.

Fixes: d1dcd67825 ("fsi: Add cfam char devices")
Reported-by: Lei YU <mine260309@gmail.com>
Tested-by: John Wang <wangzqbj@inspur.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-07-03 10:42:53 +09:30
Thomas Gleixner 1802d0beec treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:41 -07:00
Benjamin Herrenschmidt 9840fcd8cc fsi: Prevent multiple concurrent rescans
The bus scanning process isn't terribly good at parallel attempts
at rescanning the same bus. Let's have a per-master mutex protecting
the scanning process.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2018-07-27 09:58:12 +10:00
Benjamin Herrenschmidt d1dcd67825 fsi: Add cfam char devices
This aims to deprecate the "raw" sysfs file used for directly
accessing the CFAM and instead use a char device like the
other sub drivers.

Since it reworks the slave creation code and adds a cfam device
type, we also use the opportunity to convert the attributes
to attribute groups and add a couple more.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2018-07-27 09:58:05 +10:00
Benjamin Herrenschmidt 0ab5fe5374 fsi: Add new central chardev support
The various FSI devices (sbefifo, occ, scom, more to come)
currently use misc devices.

This is problematic as the minor device space for misc is
limited and there can be a lot of them. Also it limits our
ability to move them to a dedicated /dev/fsi directory or
to be smart about device naming and numbering.

It also means we have IDAs on every single of these drivers

This creates a common fsi "device_type" for the optional
/dev/fsi grouping and a dev_t allocator for all FSI devices.

"Legacy" devices get to use a backward compatible numbering
scheme (as long as chip id <16 and there's only one copy
of a given unit type per chip).

A single major number and a single IDA are shared for all
FSI devices.

This doesn't convert the FSI device drivers to use the new
scheme yet, they will be converted individually.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2018-07-27 09:57:23 +10:00
Benjamin Herrenschmidt 0a213777d1 fsi: Add support for device-tree provided chip IDs
They get retrieved from the device-tree and exposed
as an attribute in sysfs

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2018-07-23 16:27:32 +10:00
Benjamin Herrenschmidt 265aac26bc fsi: Don't use device_unregister() in fsi_master_register()
In the error path of fsi_master_register(), we currently
use device_unregister(). This will cause the last reference
to the structure to be dropped, thus freeing the enclosing
structure, which isn't what the callers want.

Use device_del() instead so that we return to the caller
with a refcount of 1. The caller can then assume that it
must use put_device() after a call to fsi_master_register()
regardless of whether the latter suceeded or failed.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2018-07-12 12:05:11 +10:00
Benjamin Herrenschmidt a2e7da86cc fsi: Add mechanism to set the tSendDelay and tEchoDelay values
Those values control the amount of "dummy" clocks between commands and
between a command and its response.

This adds a way to configure them from sysfs (to be later extended to
defaults in the device-tree). The default remains 16 (the HW default).

This is only supported if the backend supports the new link_config()
callback to configure the generation of those delays.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
---
2018-07-12 11:59:13 +10:00
Benjamin Herrenschmidt 935f963638 fsi: Move code around to avoid forward declaration
Move fsi_slave_set_smode() and its helpers to before it's
first user and remove the corresponding forward declaration.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
2018-07-12 11:58:25 +10:00
Joel Stanley 11454d6dc8 fsi: core: Fix sparse warnings
fsi-core.c:210:9: warning: cast to restricted __be32
fsi-core.c:210:9: warning: cast to restricted __be32
fsi-core.c:210:9: warning: cast to restricted __be32
fsi-core.c:210:9: warning: cast to restricted __be32
fsi-core.c:210:9: warning: cast to restricted __be32
fsi-core.c:210:9: warning: cast to restricted __be32
fsi-core.c:210:9: warning: cast to restricted __be32
fsi-core.c:210:9: warning: cast to restricted __be32
fsi-core.c:210:9: warning: cast to restricted __be32
fsi-core.c:210:9: warning: cast to restricted __be32
fsi-core.c:210:9: warning: cast to restricted __be32
fsi-core.c:210:9: warning: cast to restricted __be32
fsi-core.c:606:15: warning: incorrect type in assignment (different base types)
fsi-core.c:606:15:    expected unsigned int [unsigned] [assigned] [usertype] smode
fsi-core.c:606:15:    got restricted __be32 [usertype] <noident>
fsi-core.c:492:28: warning: expression using sizeof(void)
fsi-core.c:520:29: warning: expression using sizeof(void)
fsi-core.c:682:19: warning: cast to restricted __be32
fsi-core.c:682:19: warning: cast to restricted __be32
fsi-core.c:682:19: warning: cast to restricted __be32
fsi-core.c:682:19: warning: cast to restricted __be32
fsi-core.c:682:19: warning: cast to restricted __be32
fsi-core.c:682:19: warning: cast to restricted __be32
fsi-core.c:706:24: warning: incorrect type in assignment (different base types)
fsi-core.c:706:24:    expected unsigned int [unsigned] [usertype] llmode
fsi-core.c:706:24:    got restricted __be32 [usertype] <noident>

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2018-06-18 14:33:56 +10:00
Christopher Bostic f3aa2c6f98 fsi: core: Add check for master property no-scan-on-init
Prior to scanning a master check if the optional property
no-scan-on-init is present.  If it is then avoid scanning.  This is
necessary in cases where a master scan could interfere with another
FSI master on the same bus.

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 19:11:01 +01:00
Christopher Bostic 638bd9ac84 fsi: core: Reduce console output during normal scan
To reduce amount of console output during boot / power up make
all normal path scan related messages debug type.

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 19:11:01 +01:00
Jeremy Kerr f6a2f8eb73 fsi: Match fsi slaves and engines to available dt nodes
This change populates device tree nodes for scanned FSI slaves and
engines. If the master populates ->of_node of the FSI master device,
we'll look for matching slaves, and under those slaves we'll look for
matching engines.

This means that FSI drivers will have their ->of_node pointer populated
if there's a corresponding DT node, which they can use for further
device discover.

Presence of device tree nodes is optional, and only required for
fsi device drivers that need extra properties, or subordinate devices,
to be enumerated.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 19:11:00 +01:00
Eddie James 99f039e97b fsi: Fix one and two byte bus reads/writes
Address checker fixed to allow one and two byte reads/writes.
Address alignments for each size verified.

Signed-off-by: Edward James <eajames@us.ibm.com>
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 19:11:00 +01:00
Jeremy Kerr 15362d69c4 fsi: Add fsi_master_rescan()
We'll want non-core fsi code to trigger a rescan, so introduce a
non-static fsi_master_rescan() function. Use this for the existing
unscan/scan behaviour too.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Christopher Bostic <clbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14 19:11:00 +01:00
Colin Ian King ed50a0890e drivers/fsi: make a couple of functions static
The functions fsi_slave_report_and_clear_errors and fsi_slave_handle_error
are local to the source and do not need to be in global scope, so make
them static.

Cleans up sparse warnings:
symbol 'fsi_slave_report_and_clear_errors' was not declared. Should it
be static?
symbol 'fsi_slave_handle_error' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-04 10:32:42 +02:00
Bhumika Goyal 061c0958de drivers/fsi: add const to bin_attribute structures
Declare bin_attribute structures as const as they are only passed as an
argument to the function device_create_bin_file. This argument is of
type const, so declare the structure as const.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 17:15:16 +02:00
Arnd Bergmann ceb8a12ff2 drivers/fsi: fix fsi_slave_mode prototype
gcc warns about the return type of this function:

drivers/fsi/fsi-core.c:535:8: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]

This removes the 'const' attribute, as suggested by the warning.

Fixes: 2b37c3e285 ("drivers/fsi: Set slave SMODE to init communication")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17 16:13:54 +02:00
Joel Stanley 496f8931b6 fsi: core: register with postcore_initcall
When testing an i2c driver that is a fsi bus driver, I saw the following
oops:

 kernel BUG at drivers/base/driver.c:153!
 Internal error: Oops - BUG: 0 [#1] ARM

 [<8027cb1c>] (driver_register) from [<80344e88>] (fsi_driver_register+0x2c/0x38)
 [<80344e88>] (fsi_driver_register) from [<805f5ebc>] (fsi_i2c_driver_init+0x1c/0x24)
 [<805f5ebc>] (fsi_i2c_driver_init) from [<805d1f14>] (do_one_initcall+0xb4/0x170)
 [<805d1f14>] (do_one_initcall) from [<805d20f0>] (kernel_init_freeable+0x120/0x1dc)
 [<805d20f0>] (kernel_init_freeable) from [<8043f4a8>] (kernel_init+0x18/0x104)
 [<8043f4a8>] (kernel_init) from [<8000a5e8>] (ret_from_fork+0x14/0x2c)

This is because the fsi bus had not been registered. This fix registers the bus
with postcore_initcall instead, to ensure it is registered earlier on.

When the fsi core is used as a module this should not be a problem as the fsi
driver will depend on the fsi bus type symbol, and will therefore load the core
before the driver.

Fixes: 0508ad1fff ("drivers/fsi: Add empty fsi bus definitions")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17 16:13:54 +02:00
Christopher Bostic acb7e8f744 drivers/fsi: Add module license to core driver
Add missing MODULE_LICENSE("GPL") to the core FSI driver.

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:09 +02:00
Jeremy Kerr 4af889b0ff drivers/fsi: Use asynchronous slave mode
For slaves that are behind a software-clocked master, we want FSI CFAMs
to run asynchronously to the FSI clock, so set up our slaves to be in
async mode.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:09 +02:00
Jeremy Kerr 1fa847d74a drivers/fsi: Add error handling for slave
This change implements error handling in the FSI core, by cleaining up
and retrying failed operations, using the SISC, TERM and BREAK
facilities.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:09 +02:00
Jeremy Kerr 66433b05a3 drivers/fsi: Add tracepoints for low-level operations
Trace low level read and write FSI bus operations.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:08 +02:00
Jeremy Kerr da36cadf89 drivers/fsi: expose direct-access slave API
Allow drivers to access the slave address ranges.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:08 +02:00
Jeremy Kerr 125739cbc1 drivers/fsi: Add sysfs files for FSI master & slave accesses
This change adds a 'raw' file for reads & writes, and a 'term' file for
the TERM command, and a 'break' file for issuing a BREAK.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:08 +02:00
Christopher Bostic 356d8009a5 drivers/fsi: Add client driver register utilities
Add driver_register and driver_unregister wrappers for FSI.

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:08 +02:00
Christopher Bostic cd0fdb5c07 drivers/fsi: Add master unscan
Allow a master to undo a previous scan.  Should a master scan a bus
twice it will need to ensure it doesn't double register any
previously detected device.

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
----
v7 - Unscan when unregistering master
   - Remove leading '__'s from function names
   - Return fail state for sysfs rescan file
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:08 +02:00
Jeremy Kerr 4efe37f4c4 drivers/fsi: Add device read/write/peek API
This change introduces the fsi device API: simple read, write and peek
accessors for the devices' address spaces.

Includes contributions from Christopher Bostic
<cbostic@linux.vnet.ibm.com> and Edward A. James <eajames@us.ibm.com>.

Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:08 +02:00
Jeremy Kerr f7ade2a603 drivers/fsi: scan slaves & register devices
Now that we have fsi_slave devices, scan each for endpoints, and
register them on the fsi bus.

Includes contributions from Christopher Bostic
<cbostic@linux.vnet.ibm.com>.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:08 +02:00
Christopher Bostic 2b37c3e285 drivers/fsi: Set slave SMODE to init communication
Set CFAM to appropriate ID so that the controlling master can manage
link memory ranges.  Add slave engine register definitions.

Includes changes from Jeremy Kerr <jk@ozlabs.org>.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:08 +02:00
Jeremy Kerr 2b545cd8e1 drivers/fsi: Implement slave initialisation
Implement fsi_slave_init: if we can read a chip ID, create fsi_slave
devices and register with the driver core.

Includes changes from Christopher Bostic <cbostic@linux.vnet.ibm.com>.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:08 +02:00
Christopher Bostic 2609528211 drivers/fsi: Set up links for slave communication
Enable each link and send a break command, and try to detect a slave by
reading from the SMODE register.

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:08 +02:00
Jeremy Kerr 014c2abc53 drivers/fsi: Add slave & master read/write APIs
Introduce functions to perform reads/writes on the slave address space;
these simply pass the request on the slave's master with the correct
link and slave ID.

We implement these on top of similar helpers for the master.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:07 +02:00
Jeremy Kerr 414c102631 drivers/fsi: Add empty master scan
When a new fsi master is added, we will need to scan its links, and
slaves attached to those links. This change introduces a little shell to
iterate the links, which we will populate with the actual slave scan in
a later change.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:07 +02:00
Jeremy Kerr faf0b116de drivers/fsi: Add slave definition
Add the initial fsi slave device, which is private to the core code.
This will be a child of the master, and parent to endpoint devices.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:07 +02:00
Jeremy Kerr 09aecfab93 drivers/fsi: Add fsi master definition
Add a `struct fsi_master` to represent a FSI master controller.

FSI master drivers register one of these structs to provide
device-specific of the standard operations: read/write/term/break and
link control.

Includes changes from Edward A. James <eajames@us.ibm.com> & Jeremy Kerr
<jk@ozlabs.org>.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:07 +02:00
Jeremy Kerr dd37eed7db drivers/fsi: add driver to device matches
Driver bind to devices based on the engine types & (optional) versions.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:19:48 +01:00
Jeremy Kerr 0508ad1fff drivers/fsi: Add empty fsi bus definitions
This change adds the initial (empty) fsi bus definition, and introduces
drivers/fsi/.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:19:48 +01:00