Граф коммитов

211 Коммитов

Автор SHA1 Сообщение Дата
Chuck Lever da1661b93b SUNRPC: Teach server to use xprt_sock_sendmsg for socket sends
xprt_sock_sendmsg uses the more efficient iov_iter-enabled kernel
socket API, and is a pre-requisite for server send-side support for
TLS.

Note that svc_process no longer needs to reserve a word for the
stream record marker, since the TCP transport now provides the
record marker automatically in a separate buffer.

The dprintk() in svc_send_common is also removed. It didn't seem
crucial for field troubleshooting. If more is needed there, a trace
point could be added in xprt_sock_sendmsg().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-03-16 12:04:33 -04:00
Chuck Lever 412055398b nfsd: Fix NFSv4 READ on RDMA when using readv
svcrdma expects that the payload falls precisely into the xdr_buf
page vector. This does not seem to be the case for
nfsd4_encode_readv().

This code is called only when fops->splice_read is missing or when
RQ_SPLICE_OK is clear, so it's not a noticeable problem in many
common cases.

Add new transport method: ->xpo_read_payload so that when a READ
payload does not fit exactly in rq_res's page vector, the XDR
encoder can inform the RPC transport exactly where that payload is,
without the payload's XDR pad.

That way, when a Write chunk is present, the transport knows what
byte range in the Reply message is supposed to be matched with the
chunk.

Note that the Linux NFS server implementation of NFS/RDMA can
currently handle only one Write chunk per RPC-over-RDMA message.
This simplifies the implementation of this fix.

Fixes: b042098063 ("nfsd4: allow exotic read compounds")
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=198053
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-03-16 12:04:31 -04:00
Chuck Lever ff27e9f748 SUNRPC: Trace gssproxy upcall results
Record results of a GSS proxy ACCEPT_SEC_CONTEXT upcall and the
svc_authenticate() function to make field debugging of NFS server
Kerberos issues easier.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Bill Baker <bill.baker@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-10-30 16:32:07 -04:00
Colin Ian King e41f9efb85 sunrpc: clean up indentation issue
There are statements that are indented incorrectly, remove the
extraneous spacing.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-09-25 11:13:12 -04:00
Trond Myklebust 7402a4fedc SUNRPC: Fix up backchannel slot table accounting
Add a per-transport maximum limit in the socket case, and add
helpers to allow the NFSv4 code to discover that limit.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-07-18 01:12:59 -04:00
Thomas Gleixner 457c899653 treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Trond Myklebust 642ee6b209 SUNRPC: Allow further customisation of RPC program registration
Add a callback to allow customisation of the rpcbind registration.
When clients have the ability to turn on and off version support,
we want to allow them to also prevent registration of those
versions with the rpc portmapper.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-04-24 09:46:35 -04:00
Trond Myklebust 4532608d71 SUNRPC: Clean up generic dispatcher code
Simplify the generic server dispatcher.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-04-24 09:46:34 -04:00
Trond Myklebust 8e5b67731d SUNRPC: Add a callback to initialise server requests
Add a callback to help initialise server requests before they are
processed. This will allow us to clean up the NFS server version
support, and to make it container safe.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-04-24 09:46:34 -04:00
Trond Myklebust 83dd59a0b9 SUNRPC/nfs: Fix return value for nfs4_callback_compound()
RPC server procedures are normally expected to return a __be32 encoded
status value of type 'enum rpc_accept_stat', however at least one function
wants to return an authentication status of type 'enum rpc_auth_stat'
in the case where authentication fails.
This patch adds functionality to allow this.

Fixes: a4e187d83d ("NFS: Don't drop CB requests with invalid principals")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-04-24 09:46:34 -04:00
Chuck Lever 067fb11b12 SUNRPC: Remove rpc_xprt::tsh_size
tsh_size was added to accommodate transports that send a pre-amble
before each RPC message. However, this assumes the pre-amble is
fixed in size, which isn't true for some transports. That makes
tsh_size not very generic.

Also I'd like to make the estimation of RPC send and receive
buffer sizes more precise. tsh_size doesn't currently appear to be
accounted for at all by call_allocate.

Therefore let's just remove the tsh_size concept, and make the only
transports that have a non-zero tsh_size employ a direct approach.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 13:14:35 -05:00
Vasily Averin 8f7766c805 sunrpc: make visible processing error in bc_svc_process()
Force bc_svc_process() to generate debug message after processing errors

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-12-27 21:01:41 -05:00
Vasily Averin 64e20ba204 sunrpc: remove unused xpo_prep_reply_hdr callback
xpo_prep_reply_hdr are not used now.

It was defined for tcp transport only, however it cannot be
called indirectly, so let's move it to its caller and
remove unused callback.

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-12-27 21:01:41 -05:00
Vasily Averin d4b09acf92 sunrpc: use-after-free in svc_process_common()
if node have NFSv41+ mounts inside several net namespaces
it can lead to use-after-free in svc_process_common()

svc_process_common()
        /* Setup reply header */
        rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr(rqstp); <<< HERE

svc_process_common() can use incorrect rqstp->rq_xprt,
its caller function bc_svc_process() takes it from serv->sv_bc_xprt.
The problem is that serv is global structure but sv_bc_xprt
is assigned per-netnamespace.

According to Trond, the whole "let's set up rqstp->rq_xprt
for the back channel" is nothing but a giant hack in order
to work around the fact that svc_process_common() uses it
to find the xpt_ops, and perform a couple of (meaningless
for the back channel) tests of xpt_flags.

All we really need in svc_process_common() is to be able to run
rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr()

Bruce J Fields points that this xpo_prep_reply_hdr() call
is an awfully roundabout way just to do "svc_putnl(resv, 0);"
in the tcp case.

This patch does not initialiuze rqstp->rq_xprt in bc_svc_process(),
now it calls svc_process_common() with rqstp->rq_xprt = NULL.

To adjust reply header svc_process_common() just check
rqstp->rq_prot and calls svc_tcp_prep_reply_hdr() for tcp case.

To handle rqstp->rq_xprt = NULL case in functions called from
svc_process_common() patch intruduces net namespace pointer
svc_rqst->rq_bc_net and adjust SVC_NET() definition.
Some other function was also adopted to properly handle described case.

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Cc: stable@vger.kernel.org
Fixes: 23c20ecd44 ("NFS: callback up - users counting cleanup")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-12-27 21:00:58 -05:00
Chuck Lever 11b4d66ea3 NFSD: Handle full-length symlinks
I've given up on the idea of zero-copy handling of SYMLINK on the
server side. This is because the Linux VFS symlink API requires the
symlink pathname to be in a NUL-terminated kmalloc'd buffer. The
NUL-termination is going to be problematic (watching out for
landing on a page boundary and dealing with a 4096-byte pathname).

I don't believe that SYMLINK creation is on a performance path or is
requested frequently enough that it will cause noticeable CPU cache
pollution due to data copies.

There will be two places where a transport callout will be necessary
to fill in the rqstp: one will be in the svc_fill_symlink_pathname()
helper that is used by NFSv2 and NFSv3, and the other will be in
nfsd4_decode_create().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09 16:11:21 -04:00
Chuck Lever 3fd9557aec NFSD: Refactor the generic write vector fill helper
fill_in_write_vector() is nearly the same logic as
svc_fill_write_vector(), but there are a few differences so that
the former can handle multiple WRITE payloads in a single COMPOUND.

svc_fill_write_vector() can be adjusted so that it can be used in
the NFSv4 WRITE code path too. Instead of assuming the pages are
coming from rq_args.pages, have the caller pass in the page list.

The immediate benefit is a reduction of code duplication. It also
prevents the NFSv4 WRITE decoder from passing an empty vector
element when the transport has provided the payload in the xdr_buf's
page array.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09 16:11:21 -04:00
Chuck Lever 38a7031559 NFSD: Clean up legacy NFS SYMLINK argument XDR decoders
Move common code in NFSD's legacy SYMLINK decoders into a helper.
The immediate benefits include:

 - one fewer data copies on transports that support DDP
 - consistent error checking across all versions
 - reduction of code duplication
 - support for both legal forms of SYMLINK requests on RDMA
   transports for all versions of NFS (in particular, NFSv2, for
   completeness)

In the long term, this helper is an appropriate spot to perform a
per-transport call-out to fill the pathname argument using, say,
RDMA Reads.

Filling the pathname in the proc function also means that eventually
the incoming filehandle can be interpreted so that filesystem-
specific memory can be allocated as a sink for the pathname
argument, rather than using anonymous pages.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03 15:08:16 -04:00
Chuck Lever 8154ef2776 NFSD: Clean up legacy NFS WRITE argument XDR decoders
Move common code in NFSD's legacy NFS WRITE decoders into a helper.
The immediate benefit is reduction of code duplication and some nice
micro-optimizations (see below).

In the long term, this helper can perform a per-transport call-out
to fill the rq_vec (say, using RDMA Reads).

The legacy WRITE decoders and procs are changed to work like NFSv4,
which constructs the rq_vec just before it is about to call
vfs_writev.

Why? Calling a transport call-out from the proc instead of the XDR
decoder means that the incoming FH can be resolved to a particular
filesystem and file. This would allow pages from the backing file to
be presented to the transport to be filled, rather than presenting
anonymous pages and copying or flipping them into the file's page
cache later.

I also prefer using the pages in rq_arg.pages, instead of pulling
the data pages directly out of the rqstp::rq_pages array. This is
currently the way the NFSv3 write decoder works, but the other two
do not seem to take this approach. Fixing this removes the only
reference to rq_pages found in NFSD, eliminating an NFSD assumption
about how transports use the pages in rq_pages.

Lastly, avoid setting up the first element of rq_vec as a zero-
length buffer. This happens with an RDMA transport when a normal
Read chunk is present because the data payload is in rq_arg's
page list (none of it is in the head buffer).

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03 15:08:16 -04:00
Chuck Lever 0b9547bf6b sunrpc: Re-purpose trace_svc_process
Currently, trace_svc_process has two call sites:

1. Just after a call to svc_send. svc_send already invokes
   trace_svc_send with the same arguments just before returning

2. Just before a call to svc_drop. svc_drop already invokes
   trace_svc_drop with the same arguments just after it is called

Therefore trace_svc_process does not provide any additional
information not already provided by these other trace points.

However, it would be useful to record the incoming RPC procedure.
So reuse trace_svc_process for this purpose.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-04-03 15:08:12 -04:00
Linus Torvalds 1be2172e96 Modules updates for v4.15
Summary of modules changes for the 4.15 merge window:
 
 - Treewide module_param_call() cleanup, fix up set/get function
   prototype mismatches, from Kees Cook
 
 - Minor code cleanups
 
 Signed-off-by: Jessica Yu <jeyu@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCgAGBQJaDCyzAAoJEMBFfjjOO8FyaYQP/AwHBy6XmwwVlWDP4BqIF6hL
 Vhy3ccVLYEORvePv68tWSRPUz5n6+1Ebqanmwtkw6i8l+KwxY2SfkZql09cARc33
 2iBE4bHF98iWQmnJbF6me80fedY9n5bZJNMQKEF9VozJWwTMOTQFTCfmyJRDBmk9
 iidQj6M3idbSUOYIJjvc40VGx5NyQWSr+FFfqsz1rU5iLGRGEvA3I2/CDT0oTuV6
 D4MmFxzE2Tv/vIMa2GzKJ1LGScuUfSjf93Lq9Kk0cG36qWao8l930CaXyVdE9WJv
 bkUzpf3QYv/rDX6QbAGA0cada13zd+dfBr8YhchclEAfJ+GDLjMEDu04NEmI6KUT
 5lP0Xw0xYNZQI7bkdxDMhsj5jaz/HJpXCjPCtZBnSEKiL4OPXVMe+pBHoCJ2/yFN
 6M716XpWYgUviUOdiE+chczB5p3z4FA6u2ykaM4Tlk0btZuHGxjcSWwvcIdlPmjm
 kY4AfDV6K0bfEBVguWPJicvrkx44atqT5nWbbPhDwTSavtsuRJLb3GCsHedx7K8h
 ZO47lCQFAWCtrycK1HYw+oupNC3hYWQ0SR42XRdGhL1bq26C+1sei1QhfqSgA9PQ
 7CwWH4UTOL9fhtrzSqZngYOh9sjQNFNefqQHcecNzcEjK2vjrgQZvRNWZKHSwaFs
 fbGX8juZWP4ypbK+irTB
 =c8vb
 -----END PGP SIGNATURE-----

Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux

Pull module updates from Jessica Yu:
 "Summary of modules changes for the 4.15 merge window:

   - treewide module_param_call() cleanup, fix up set/get function
     prototype mismatches, from Kees Cook

   - minor code cleanups"

* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Do not paper over type mismatches in module_param_call()
  treewide: Fix function prototypes for module_param_call()
  module: Prepare to convert all module_param_call() prototypes
  kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
2017-11-15 13:46:33 -08:00
Kees Cook e4dca7b7aa treewide: Fix function prototypes for module_param_call()
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:

@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@

 module_param_call(_name, _set_func, _get_func, _arg, _mode);

@fix_set_prototype
 depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@

 int _set_func(
-_val_type _val
+const char * _val
 ,
-_param_type _param
+const struct kernel_param * _param
 ) { ... }

@fix_get_prototype
 depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@

 int _get_func(
-_val_type _val
+char * _val
 ,
-_param_type _param
+const struct kernel_param * _param
 ) { ... }

Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:

	drivers/platform/x86/thinkpad_acpi.c
	fs/lockd/svc.c

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2017-10-31 15:30:37 +01:00
Kees Cook ff861c4d64 sunrpc: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-nfs@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18 12:40:27 +01:00
Chuck Lever afea5657c2 sunrpc: Const-ify struct sv_serv_ops
Close an attack vector by moving the arrays of per-server methods to
read-only memory.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-08-24 22:13:50 -04:00
Chuck Lever 06eb8a56af sunrpc: Disable splice for krb5i
Running a multi-threaded 8KB fio test (70/30 mix), three or four out
of twelve of the jobs fail when using krb5i. The failure is an EIO
on a read.

Troubleshooting confirmed the EIO results when the client fails to
verify the MIC of an NFS READ reply. Bruce suggested the problem
could be due to the data payload changing between the time the
reply's MIC was computed on the server and the time the reply was
actually sent.

krb5p gets around this problem by disabling RQ_SPLICE_OK. Use the
same mechanism for krb5i RPCs.

"iozone -i0 -i1 -s128m -y1k -az -I", export is tmpfs, mount is
sec=krb5i,vers=3,proto=rdma. The important numbers are the
read / reread column.

Here's without the RQ_SPLICE_OK patch:

              kB  reclen    write  rewrite    read    reread
          131072       1     7546     7929     8396     8267
          131072       2    14375    14600    15843    15639
          131072       4    19280    19248    21303    21410
          131072       8    32350    31772    35199    34883
          131072      16    36748    37477    49365    51706
          131072      32    55669    56059    57475    57389
          131072      64    74599    75190    74903    75550
          131072     128    99810   101446   102828   102724
          131072     256   122042   122612   124806   125026
          131072     512   137614   138004   141412   141267
          131072    1024   146601   148774   151356   151409
          131072    2048   180684   181727   293140   292840
          131072    4096   206907   207658   552964   549029
          131072    8192   223982   224360   454493   473469
          131072   16384   228927   228390   654734   632607

And here's with it:

              kB  reclen    write  rewrite    read    reread
          131072       1     7700     7365     7958     8011
          131072       2    13211    13303    14937    14414
          131072       4    19001    19265    20544    20657
          131072       8    30883    31097    34255    33566
          131072      16    36868    34908    51499    49944
          131072      32    56428    55535    58710    56952
          131072      64    73507    74676    75619    74378
          131072     128   100324   101442   103276   102736
          131072     256   122517   122995   124639   124150
          131072     512   137317   139007   140530   140830
          131072    1024   146807   148923   151246   151072
          131072    2048   179656   180732   292631   292034
          131072    4096   206216   208583   543355   541951
          131072    8192   223738   224273   494201   489372
          131072   16384   229313   229840   691719   668427

I would say that there is not much difference in this test.

For good measure, here's the same test with sec=krb5p:

              kB  reclen    write  rewrite    read    reread
          131072       1     5982     5881     6137     6218
          131072       2    10216    10252    10850    10932
          131072       4    12236    12575    15375    15526
          131072       8    15461    15462    23821    22351
          131072      16    25677    25811    27529    27640
          131072      32    31903    32354    34063    33857
          131072      64    42989    43188    45635    45561
          131072     128    52848    53210    56144    56141
          131072     256    59123    59214    62691    62933
          131072     512    63140    63277    66887    67025
          131072    1024    65255    65299    69213    69140
          131072    2048    76454    76555   133767   133862
          131072    4096    84726    84883   251925   250702
          131072    8192    89491    89482   270821   276085
          131072   16384    91572    91597   361768   336868

BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=307
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-06-28 14:20:05 -04:00
Christoph Hellwig e9679189e3 sunrpc: mark all struct svc_version instances as const
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-05-15 17:42:31 +02:00
Christoph Hellwig 860bda29b9 sunrpc: mark all struct svc_procinfo instances as const
struct svc_procinfo contains function pointers, and marking it as
constant avoids it being able to be used as an attach vector for
code injections.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-15 17:42:31 +02:00
Christoph Hellwig 7fd38af9ca sunrpc: move pc_count out of struct svc_procinfo
pc_count is the only writeable memeber of struct svc_procinfo, which is
a good candidate to be const-ified as it contains function pointers.

This patch moves it into out out struct svc_procinfo, and into a
separate writable array that is pointed to by struct svc_version.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-15 17:42:30 +02:00
Christoph Hellwig 63f8de3795 sunrpc: properly type pc_encode callbacks
Drop the resp argument as it can trivially be derived from the rqstp
argument.  With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-05-15 17:42:25 +02:00
Christoph Hellwig 026fec7e7c sunrpc: properly type pc_decode callbacks
Drop the argp argument as it can trivially be derived from the rqstp
argument.  With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-15 17:42:24 +02:00
Christoph Hellwig 8537488b5a sunrpc: properly type pc_release callbacks
Drop the p and resp arguments as they are always NULL or can trivially
be derived from the rqstp argument.  With that all functions now have the
same prototype, and we can remove the unsafe casting to kxdrproc_t.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-15 17:42:23 +02:00
Christoph Hellwig a6beb73272 sunrpc: properly type pc_func callbacks
Drop the argp and resp arguments as they can trivially be derived from
the rqstp argument.  With that all functions now have the same prototype,
and we can remove the unsafe casting to svc_procfunc as well as the
svc_procfunc typedef itself.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-15 17:42:23 +02:00
Trond Myklebust ed6473ddc7 NFSv4: Fix callback server shutdown
We want to use kthread_stop() in order to ensure the threads are
shut down before we tear down the nfs_callback_info in nfs_callback_down.

Tested-and-reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: bb6aeba736 ("NFSv4.x: Switch to using svc_set_num_threads()...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-04-27 18:00:16 -04:00
Trond Myklebust 9e0d87680d SUNRPC: Refactor svc_set_num_threads()
Refactor to separate out the functions of starting and stopping threads
so that they can be used in other helpers.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-and-reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-04-27 17:59:58 -04:00
Ingo Molnar 3f07c01441 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:29 +01:00
Linus Torvalds 8313064c2e The nfsd update this round is mainly a lot of miscellaneous cleanups and
bugfixes.
 
 A couple changes could theoretically break working setups on upgrade.  I
 don't expect complaints in practice, but they seem worth calling out
 just in case:
 
 	- NFS security labels are now off by default; a new
 	  security_label export flag reenables it per export.  But,
 	  having them on by default is a disaster, as it generally only
 	  makes sense if all your clients and servers have similar
 	  enough selinux policies.  Thanks to Jason Tibbitts for
 	  pointing this out.
 
 	- NFSv4/UDP support is off.  It was never really supported, and
 	  the spec explicitly forbids it.  We only ever left it on out
 	  of laziness; thanks to Jeff Layton for finally fixing that.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYtejbAAoJECebzXlCjuG+JhEQAK3YTYYNrPY26Pfiu0FghLFV
 4qOHK4DOkJzrWIom5uWyBo7yOwH6WnQtTe/gCx/voOEW3lsJO7F3IfTnTVp+Smp6
 GJeVtsr1vI9EBnwhMlyoJ5hZ2Ju5kX3MBVnew6+momt6620ZO7a+EtT+74ePaY8Y
 jxLzWVA1UqbWYoMabNQpqgKypKvNrhwst72iYyBhNuL/qtGeBDQWwcrA+TFeE9tv
 Ad7qB53xL1mr0Wn1CNIOR/IzVAj4o2H0vdjqrPjAdvbfwf8YYLNpJXt5k591wx/j
 1TpiWIPqnwLjMT3X5NkQN3agZKeD+2ZWPrClr35TgRRe62CK6JblK9/Wwc5BRSzV
 paMP3hOm6/dQOBA5C+mqPaHdEI8VqcHyZpxU4VC/ttsVEGTgaLhGwHGzSn+5lYiM
 Qx9Sh50yFV3oiBW/sb/y8lBDwYm/Cq0OyqAU277idbdzjcFerMg1qt06tjEQhYMY
 K2V7rS8NuADUF6F1BwOONZzvg7Rr7iWHmLh+iSM9TeQoEmz2jIHSaLIFaYOET5Jr
 PIZS3rOYoa0FaKOYVYnZMC74n/LqP/Aou8B+1rRcLy5YEdUIIIVpFvqpg1nGv6PI
 sA3zx/f13IRte3g0CuQiY0/2cx7uXk/gXJ7s5+ejEzljF/aYWiomx3mr6HqPQETn
 CWEtXlfyJCyX+A8hbO+U
 =iLLz
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-4.11' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
 "The nfsd update this round is mainly a lot of miscellaneous cleanups
  and bugfixes.

  A couple changes could theoretically break working setups on upgrade.
  I don't expect complaints in practice, but they seem worth calling out
  just in case:

   - NFS security labels are now off by default; a new security_label
     export flag reenables it per export. But, having them on by default
     is a disaster, as it generally only makes sense if all your clients
     and servers have similar enough selinux policies. Thanks to Jason
     Tibbitts for pointing this out.

   - NFSv4/UDP support is off. It was never really supported, and the
     spec explicitly forbids it. We only ever left it on out of
     laziness; thanks to Jeff Layton for finally fixing that"

* tag 'nfsd-4.11' of git://linux-nfs.org/~bfields/linux: (34 commits)
  nfsd: Fix display of the version string
  nfsd: fix configuration of supported minor versions
  sunrpc: don't register UDP port with rpcbind when version needs congestion control
  nfs/nfsd/sunrpc: enforce transport requirements for NFSv4
  sunrpc: flag transports as having congestion control
  sunrpc: turn bitfield flags in svc_version into bools
  nfsd: remove superfluous KERN_INFO
  nfsd: special case truncates some more
  nfsd: minor nfsd_setattr cleanup
  NFSD: Reserve adequate space for LOCKT operation
  NFSD: Get response size before operation for all RPCs
  nfsd/callback: Drop a useless data copy when comparing sessionid
  nfsd/callback: skip the callback tag
  nfsd/callback: Cleanup callback cred on shutdown
  nfsd/idmap: return nfserr_inval for 0-length names
  SUNRPC/Cache: Always treat the invalid cache as unexpired
  SUNRPC: Drop all entries from cache_detail when cache_purge()
  svcrdma: Poll CQs in "workqueue" mode
  svcrdma: Combine list fields in struct svc_rdma_op_ctxt
  svcrdma: Remove unused sc_dto_q field
  ...
2017-02-28 15:39:09 -08:00
Alexey Dobriyan 5b5e0928f7 lib/vsprintf.c: remove %Z support
Now that %z is standartised in C99 there is no reason to support %Z.
Unlike %L it doesn't even make format strings smaller.

Use BUILD_BUG_ON in a couple ATM drivers.

In case anyone didn't notice lib/vsprintf.o is about half of SLUB which
is in my opinion is quite an achievement.  Hopefully this patch inspires
someone else to trim vsprintf.c more.

Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Jeff Layton 7259f1dfe7 sunrpc: don't register UDP port with rpcbind when version needs congestion control
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-02-24 17:04:48 -05:00
Jeff Layton 5283b03ee5 nfs/nfsd/sunrpc: enforce transport requirements for NFSv4
NFSv4 requires a transport "that is specified to avoid network
congestion" (RFC 7530, section 3.1, paragraph 2).  In practical terms,
that means that you should not run NFSv4 over UDP. The server has never
enforced that requirement, however.

This patchset fixes this by adding a new flag to the svc_version that
states that it has these transport requirements. With that, we can check
that the transport has XPT_CONG_CTRL set before processing an RPC. If it
doesn't we reject it with RPC_PROG_MISMATCH.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-02-24 17:03:34 -05:00
Jeff Layton 05a45a2db4 sunrpc: turn bitfield flags in svc_version into bools
It's just simpler to read this way, IMO. Also, no need to explicitly
set vs_hidden to false in the nfsacl ones.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-02-24 15:50:08 -05:00
Chuck Lever 4d712ef1db svcauth_gss: Close connection when dropping an incoming message
S5.3.3.1 of RFC 2203 requires that an incoming GSS-wrapped message
whose sequence number lies outside the current window is dropped.
The rationale is:

  The reason for discarding requests silently is that the server
  is unable to determine if the duplicate or out of range request
  was due to a sequencing problem in the client, network, or the
  operating system, or due to some quirk in routing, or a replay
  attack by an intruder.  Discarding the request allows the client
  to recover after timing out, if indeed the duplication was
  unintentional or well intended.

However, clients may rely on the server dropping the connection to
indicate that a retransmit is needed. Without a connection reset, a
client can wait forever without retransmitting, and the workload
just stops dead. I've reproduced this behavior by running xfstests
generic/323 on an NFSv4.0 mount with proto=rdma and sec=krb5i.

To address this issue, have the server close the connection when it
silently discards an incoming message due to a GSS sequence number
problem.

There are a few other places where the server will never reply.
Change those spots in a similar fashion.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-11-30 17:31:11 -05:00
Trond Myklebust d002526886 SUNRPC: Initialise struct svc_serv backchannel fields during __svc_create()
Clean up.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-19 13:08:36 -04:00
Chuck Lever a4e187d83d NFS: Don't drop CB requests with invalid principals
Before commit 778be232a2 ("NFS do not find client in NFSv4
pg_authenticate"), the Linux callback server replied with
RPC_AUTH_ERROR / RPC_AUTH_BADCRED, instead of dropping the CB
request. Let's restore that behavior so the server has a chance to
do something useful about it, and provide a warning that helps
admins correct the problem.

Fixes: 778be232a2 ("NFS do not find client in NFSv4 ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-07-11 15:50:43 -04:00
Chuck Lever 0533b13072 svc: Avoid garbage replies when pc_func() returns rpc_drop_reply
If an RPC program does not set vs_dispatch and pc_func() returns
rpc_drop_reply, the server sends a reply anyway containing a single
word containing the value RPC_DROP_REPLY (in network byte-order, of
course). This is a nonsense RPC message.

Fixes: 9e701c6109 ("svcrpc: simpler request dropping")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-07-11 15:50:43 -04:00
Trond Myklebust 756b9b37cf SUNRPC: Fix callback channel
The NFSv4.1 callback channel is currently broken because the receive
message will keep shrinking because the backchannel receive buffer size
never gets reset.
The easiest solution to this problem is instead of changing the receive
buffer, to rather adjust the copied request.

Fixes: 38b7631fbe ("nfs4: limit callback decoding to received bytes")
Cc: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-12-07 13:04:59 -08:00
Benjamin Coddington 38b7631fbe nfs4: limit callback decoding to received bytes
A truncated cb_compound request will cause the client to decode null or
data from a previous callback for nfs4.1 backchannel case, or uninitialized
data for the nfs4.0 case. This is because the path through
svc_process_common() advances the request's iov_base and decrements iov_len
without adjusting the overall xdr_buf's len field.  That causes
xdr_init_decode() to set up the xdr_stream with an incorrect length in
nfs4_callback_compound().

Fixing this for the nfs4.1 backchannel case first requires setting the
correct iov_len and page_len based on the length of received data in the
same manner as the nfs4.0 case.

Then the request's xdr_buf length can be adjusted for both cases based upon
the remaining iov_len and page_len.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23 22:03:15 -05:00
Chuck Lever 0f2e3bdab6 SUNRPC: Remove the TCP-only restriction in bc_svc_process()
Allow the use of other transport classes when handling a backward
direction RPC call.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Tested-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-11-02 13:45:15 -05:00
Jeff Layton 1b6dc1dffb nfsd/sunrpc: factor svc_rqst allocation and freeing from sv_nrthreads refcounting
In later patches, we'll want to be able to allocate and free svc_rqst
structures without monkeying with the serv->sv_nrthreads refcount.

Factor those pieces out of their respective functions.

Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-08-10 16:05:44 -04:00
Jeff Layton d70bc0c67c nfsd/sunrpc: move pool_mode definitions into svc.h
In later patches, we're going to need to allow code external to svc.c
to figure out what pool_mode is in use. Move these definitions into
svc.h to prepare for that.

Also, make the svc_pool_map object available and exported so that other
modules can peek in there to get insight into what pool mode is in use.
Likewise, export svc_pool_map_get/put function to make it safe to do so.

Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-08-10 16:05:43 -04:00
Jeff Layton 758f62fff9 nfsd/sunrpc: move sv_module parm into sv_ops
...not technically an operation, but it's more convenient and cleaner
to pass the module pointer in this struct.

Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-08-10 16:05:41 -04:00
Jeff Layton c369014f17 nfsd/sunrpc: move sv_function into sv_ops
Since we now have a container for holding svc_serv operations, move the
sv_function into it as well.

Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-08-10 16:05:41 -04:00