Граф коммитов

88 Коммитов

Автор SHA1 Сообщение Дата
Nicholas Bellinger 6f48655fac target: Fix node_acl demo-mode + uncached dynamic shutdown regression
This patch fixes a generate_node_acls = 1 + cache_dynamic_acls = 0
regression, that was introduced by

  commit 01d4d67355
  Author: Nicholas Bellinger <nab@linux-iscsi.org>
  Date:   Wed Dec 7 12:55:54 2016 -0800

which originally had the proper list_del_init() usage, but was
dropped during list review as it was thought unnecessary by HCH.

However, list_del_init() usage is required during the special
generate_node_acls = 1 + cache_dynamic_acls = 0 case when
transport_free_session() does a list_del(&se_nacl->acl_list),
followed by target_complete_nacl() doing the same thing.

This was manifesting as a general protection fault as reported
by Justin:

kernel: general protection fault: 0000 [#1] SMP
kernel: Modules linked in:
kernel: CPU: 0 PID: 11047 Comm: iscsi_ttx Not tainted 4.13.0-rc2.x86_64.1+ #20
kernel: Hardware name: Intel Corporation S5500BC/S5500BC, BIOS S5500.86B.01.00.0064.050520141428 05/05/2014
kernel: task: ffff88026939e800 task.stack: ffffc90007884000
kernel: RIP: 0010:target_put_nacl+0x49/0xb0
kernel: RSP: 0018:ffffc90007887d70 EFLAGS: 00010246
kernel: RAX: dead000000000200 RBX: ffff8802556ca000 RCX: 0000000000000000
kernel: RDX: dead000000000100 RSI: 0000000000000246 RDI: ffff8802556ce028
kernel: RBP: ffffc90007887d88 R08: 0000000000000001 R09: 0000000000000000
kernel: R10: ffffc90007887df8 R11: ffffea0009986900 R12: ffff8802556ce020
kernel: R13: ffff8802556ce028 R14: ffff8802556ce028 R15: ffffffff88d85540
kernel: FS:  0000000000000000(0000) GS:ffff88027fc00000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 00007fffe36f5f94 CR3: 0000000009209000 CR4: 00000000003406f0
kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
kernel: Call Trace:
kernel:  transport_free_session+0x67/0x140
kernel:  transport_deregister_session+0x7a/0xc0
kernel:  iscsit_close_session+0x92/0x210
kernel:  iscsit_close_connection+0x5f9/0x840
kernel:  iscsit_take_action_for_connection_exit+0xfe/0x110
kernel:  iscsi_target_tx_thread+0x140/0x1e0
kernel:  ? wait_woken+0x90/0x90
kernel:  kthread+0x124/0x160
kernel:  ? iscsit_thread_get_cpumask+0x90/0x90
kernel:  ? kthread_create_on_node+0x40/0x40
kernel:  ret_from_fork+0x22/0x30
kernel: Code: 00 48 89 fb 4c 8b a7 48 01 00 00 74 68 4d 8d 6c 24 08 4c
89 ef e8 e8 28 43 00 48 8b 93 20 04 00 00 48 8b 83 28 04 00 00 4c 89
ef <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 20
kernel: RIP: target_put_nacl+0x49/0xb0 RSP: ffffc90007887d70
kernel: ---[ end trace f12821adbfd46fed ]---

To address this, go ahead and use proper list_del_list() for all
cases of se_nacl->acl_list deletion.

Reported-by: Justin Maggard <jmaggard01@gmail.com>
Tested-by: Justin Maggard <jmaggard01@gmail.com>
Cc: Justin Maggard <jmaggard01@gmail.com>
Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-08-09 20:55:19 -07:00
Nicholas Bellinger 9ae0e9ade5 target/configfs: Kill se_lun->lun_link_magic
Instead of using a hardcoded magic value in se_lun when verifying
a target config_item symlink source during target_fabric_mappedlun_link(),
go ahead and use target_fabric_port_item_ops directly instead.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-06-08 23:26:38 -07:00
Nicholas Bellinger 46861cdd80 target: Don't force session reset if queue_depth does not change
Keeping in the idempotent nature of target_core_fabric_configfs.c,
if a queue_depth value is set and it's the same as the existing
value, don't attempt to force session reinstatement.

Reported-by: Raghu Krishnamurthy <rk@datera.io>
Cc: Raghu Krishnamurthy <rk@datera.io>
Tested-by: Gary Guo <ghg@datera.io>
Cc: Gary Guo <ghg@datera.io>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-05-04 20:01:40 -07:00
Nicholas Bellinger 49cb77e297 target: Avoid mappedlun symlink creation during lun shutdown
This patch closes a race between se_lun deletion during configfs
unlink in target_fabric_port_unlink() -> core_dev_del_lun()
-> core_tpg_remove_lun(), when transport_clear_lun_ref() blocks
waiting for percpu_ref RCU grace period to finish, but a new
NodeACL mappedlun is added before the RCU grace period has
completed.

This can happen in target_fabric_mappedlun_link() because it
only checks for se_lun->lun_se_dev, which is not cleared until
after transport_clear_lun_ref() percpu_ref RCU grace period
finishes.

This bug originally manifested as NULL pointer dereference
OOPsen in target_stat_scsi_att_intr_port_show_attr_dev() on
v4.1.y code, because it dereferences lun->lun_se_dev without
a explicit NULL pointer check.

In post v4.1 code with target-core RCU conversion, the code
in target_stat_scsi_att_intr_port_show_attr_dev() no longer
uses se_lun->lun_se_dev, but the same race still exists.

To address the bug, go ahead and set se_lun>lun_shutdown as
early as possible in core_tpg_remove_lun(), and ensure new
NodeACL mappedlun creation in target_fabric_mappedlun_link()
fails during se_lun shutdown.

Reported-by: James Shen <jcs@datera.io>
Cc: James Shen <jcs@datera.io>
Tested-by: James Shen <jcs@datera.io>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-30 01:36:52 -07:00
Mike Christie 530c6891b1 target: allow ALUA setup for some passthrough backends
This patch allows passthrough backends to use the core/base LIO
ALUA setup and state checks, but still handle the execution of
commands.

This will allow the target_core_user module to execute STPG and RTPG
in userspace, and not have to duplicate the ALUA state checks, path
information (needed so we can check if command is executable on
specific paths) and setup (rtslib sets/updates the configfs ALUA
interface like it does for iblock or file).

For STPG, the target_core_user userspace daemon, tcmu-runner will
still execute the STPG, and to update the core/base LIO state it
will use the existing configfs interface. For RTPG, tcmu-runner
will loop over configfs and/or cache the state.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18 14:47:25 -07:00
Linus Torvalds 821fd6f6cb Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

   - enable dual mode (initiator + target) qla2xxx operation. (Quinn +
     Himanshu)

   - add a framework for qla2xxx async fabric discovery. (Quinn +
     Himanshu)

   - enable iscsi PDU DDP completion offload in cxgbit/T6 NICs. (Varun)

   - fix target-core handling of aborted failed commands. (Bart)

   - fix a long standing target-core issue NULL pointer dereference with
     active I/O LUN shutdown. (Rob Millner + Bryant + nab)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits)
  target: Add counters for ABORT_TASK success + failure
  iscsi-target: Fix early login failure statistics misses
  target: Fix NULL dereference during LUN lookup + active I/O shutdown
  target: Delete tmr from list before processing
  target: Fix handling of aborted failed commands
  uapi: fix linux/target_core_user.h userspace compilation errors
  target: export protocol identifier
  qla2xxx: Fix a warning reported by the "smatch" static checker
  target/iscsi: Fix unsolicited data seq_end_offset calculation
  target/cxgbit: add T6 iSCSI DDP completion feature
  target/cxgbit: Enable DDP for T6 only if data sequence and pdu are in order
  target/cxgbit: Use T6 specific macros to get ETH/IP hdr len
  target/cxgbit: use cxgb4_tp_smt_idx() to get smt idx
  target/iscsi: split iscsit_check_dataout_hdr()
  target: Remove command flag CMD_T_DEV_ACTIVE
  target: Remove command flag CMD_T_BUSY
  target: Move session check from target_put_sess_cmd() into target_release_cmd_kref()
  target: Inline transport_cmd_check_stop()
  target: Remove an overly chatty debug message
  target: Stop execution if CMD_T_STOP has been set
  ...
2017-03-02 14:52:05 -08:00
Nicholas Bellinger bd4e2d2907 target: Fix NULL dereference during LUN lookup + active I/O shutdown
When transport_clear_lun_ref() is shutting down a se_lun via
configfs with new I/O in-flight, it's possible to trigger a
NULL pointer dereference in transport_lookup_cmd_lun() due
to the fact percpu_ref_get() doesn't do any __PERCPU_REF_DEAD
checking before incrementing lun->lun_ref.count after
lun->lun_ref has switched to atomic_t mode.

This results in a NULL pointer dereference as LUN shutdown
code in core_tpg_remove_lun() continues running after the
existing ->release() -> core_tpg_lun_ref_release() callback
completes, and clears the RCU protected se_lun->lun_se_dev
pointer.

During the OOPs, the state of lun->lun_ref in the process
which triggered the NULL pointer dereference looks like
the following on v4.1.y stable code:

struct se_lun {
  lun_link_magic = 4294932337,
  lun_status = TRANSPORT_LUN_STATUS_FREE,

  .....

  lun_se_dev = 0x0,
  lun_sep = 0x0,

  .....

  lun_ref = {
    count = {
      counter = 1
    },
    percpu_count_ptr = 3,
    release = 0xffffffffa02fa1e0 <core_tpg_lun_ref_release>,
    confirm_switch = 0x0,
    force_atomic = false,
    rcu = {
      next = 0xffff88154fa1a5d0,
      func = 0xffffffff8137c4c0 <percpu_ref_switch_to_atomic_rcu>
    }
  }
}

To address this bug, use percpu_ref_tryget_live() to ensure
once __PERCPU_REF_DEAD is visable on all CPUs and ->lun_ref
has switched to atomic_t, all new I/Os will fail to obtain
a new lun->lun_ref reference.

Also use an explicit percpu_ref_kill_and_confirm() callback
to block on ->lun_ref_comp to allow the first stage and
associated RCU grace period to complete, and then block on
->lun_ref_shutdown waiting for the final percpu_ref_put()
to drop the last reference via transport_lun_remove_cmd()
before continuing with core_tpg_remove_lun() shutdown.

Reported-by: Rob Millner <rlm@daterainc.com>
Tested-by: Rob Millner <rlm@daterainc.com>
Cc: Rob Millner <rlm@daterainc.com>
Tested-by: Vaibhav Tandon <vst@datera.io>
Cc: Vaibhav Tandon <vst@datera.io>
Tested-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-02-26 16:08:44 -08:00
Bart Van Assche 2bce1a6d22 IB/srpt: Accept GUIDs as port names
Port and ACL information must be configured before an initiator
logs in.  Make it possible to configure this information before
a subnet prefix has been assigned to a port by not only accepting
GIDs as target port and initiator port names but by also accepting
port GUIDs.

Add a 'priv' member to struct se_wwn to allow target drivers to
associate their own data with struct se_wwn.

Reported-by: Doug Ledford <dledford@redhat.com>
References: http://www.spinics.net/lists/linux-rdma/msg39505.html
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-27 14:31:50 -05:00
Christoph Hellwig d94331fab6 target: remove sess_kref and ->shutdown_session
Both of them are unused now that drivers handle any delayed session
shutdown internally.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-05-10 01:19:49 -07:00
Christoph Hellwig 22d11759a4 target: make ->shutdown_session optional
Turns out the template and thus many drivers got the return value wrong:
0 means the fabrics driver needs to put a session reference, which no
driver except for the iSCSI target drivers did.  Fortunately none of these
drivers supports explicit Node ACLs, so the bug was harmless.

Even without that only qla2xxx and iscsi every did real work in
shutdown_session, so get rid of the boilerplate code in all other
drivers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-05-10 01:19:18 -07:00
Christoph Hellwig fba81f8831 target: remove acl_stop
Ensure we can use list_empty on the sess_acl_list to remove the need for
this flag.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-05-10 01:19:11 -07:00
Christoph Hellwig bc6e6bb470 target: consolidate and fix session shutdown
Factor out a helper to shutdown sessions for a Node ACL, and make it
properly restart the list walk after dropping the lock.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-05-10 01:19:03 -07:00
Andy Grover 03a68b44fa target: Remove enum transport_lunflags_table
se_dev_entry.lun_flags and se_lun.lun_access are only used for keeping
track of read-write vs. read-only state. Since this is an either/or thing
we can represent it as bool, and remove the unneeded enum
transport_lunflags_table, which is left over from when there were more
flags.

Change code that uses this enum to just use true/false, and make it clear
through variable and param names that true means read-only, false means
read-write.

Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-10 21:48:55 -08:00
Nicholas Bellinger 21aaa23b0e target: Obtain se_node_acl->acl_kref during get_initiator_node_acl
This patch addresses a long standing race where obtaining
se_node_acl->acl_kref in __transport_register_session()
happens a bit too late, and leaves open the potential
for core_tpg_del_initiator_node_acl() to hit a NULL
pointer dereference.

Instead, take ->acl_kref in core_tpg_get_initiator_node_acl()
while se_portal_group->acl_node_mutex is held, and move the
final target_put_nacl() from transport_deregister_session()
into transport_free_session() so that fabric driver login
failure handling using the modern method to still work
as expected.

Also, update core_tpg_get_initiator_node_acl() to take
an extra reference for dynamically generated acls for
demo-mode, before returning to fabric caller.  Also
update iscsi-target sendtargets special case handling
to use target_tpg_has_node_acl() when checking if
demo_mode_discovery == true during discovery lookup.

Note the existing wait_for_completion(&acl->acl_free_comp)
in core_tpg_del_initiator_node_acl() does not change.

Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-20 01:34:15 -08:00
Nicholas Bellinger d36ad77f70 target: Convert ACL change queue_depth se_session reference usage
This patch converts core_tpg_set_initiator_node_queue_depth()
to use struct se_node_acl->acl_sess_list when performing
explicit se_tpg_tfo->shutdown_session() for active sessions,
in order for new se_node_acl->queue_depth to take effect.

This follows how core_tpg_del_initiator_node_acl() currently
works when invoking se_tpg_tfo->shutdown-session(), and ahead
of the next patch to take se_node_acl->acl_kref during lookup,
the extra get_initiator_node_acl() can go away. In order to
achieve this, go ahead and change target_get_session() to use
kref_get_unless_zero() and propigate up the return value
to know when a session is already being released.

This is because se_node_acl->acl_group is already protecting
se_node_acl->acl_group reference via configfs, and shutdown
within core_tpg_del_initiator_node_acl() won't occur until
sys_write() to core_tpg_set_initiator_node_queue_depth()
attribute returns back to user-space.

Also, drop the left-over iscsi-target hack, and obtain
se_portal_group->session_lock in lio_tpg_shutdown_session()
internally. Remove iscsi-target wrapper and unused se_tpg +
force parameters and associated code.

Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-20 01:34:14 -08:00
Bart Van Assche dba5ccc7a6 target: Remove an unused variable
The num_node_acls member in struct se_portal_group is modified
by several functions but is never read. Hence remove it.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07 13:57:53 -08:00
Nicholas Bellinger eeeb952223 target: Propigate backend read-only to core_tpg_add_lun
This patch adds a DF_READ_ONLY flag that is used by IBLOCK to
signal when a backend has been set to read-only mode, in order
to propigate read-only status up to core_tpg_add_lun() for all
future LUN fabric exports.

With this is place, existing emulation for reporting read-only
in spc_emulate_modesense() and normal transport_lookup_cmd_lun()
TCM_WRITE_PROTECTED status checking just works as expected.

Reported-by: Joeue Deng <joeue404@gmail.com>
Reported-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-09-24 23:17:21 -07:00
Hannes Reinecke e986a35aba tcm_loop: Send I_T_NEXUS_LOSS_OCCURRED UA
If the virtual SAS link is set to 'offline' we should be
queueing an I_T_NEXUS_LOSS_OCCURRED UA.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-23 22:08:22 -07:00
Linus Torvalds 5c755fe142 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "It's been a busy development cycle for target-core in a number of
  different areas.

  The fabric API usage for se_node_acl allocation is now within
  target-core code, dropping the external API callers for all fabric
  drivers tree-wide.

  There is a new conversion to RCU hlists for se_node_acl and
  se_portal_group LUN mappings, that turns fast-past LUN lookup into a
  completely lockless code-path.  It also removes the original
  hard-coded limitation of 256 LUNs per fabric endpoint.

  The configfs attributes for backends can now be shared between core
  and driver code, allowing existing drivers to use common code while
  still allowing flexibility for new backend provided attributes.

  The highlights include:

   - Merge sbc_verify_dif_* into common code (sagi)
   - Remove iscsi-target support for obsolete IFMarker/OFMarker
     (Christophe Vu-Brugier)
   - Add bidi support in target/user backend (ilias + vangelis + agover)
   - Move se_node_acl allocation into target-core code (hch)
   - Add crc_t10dif_update common helper (akinobu + mkp)
   - Handle target-core odd SGL mapping for data transfer memory
     (akinobu)
   - Move transport ID handling into target-core (hch)
   - Move task tag into struct se_cmd + support 64-bit tags (bart)
   - Convert se_node_acl->device_list[] to RCU hlist (nab + hch +
     paulmck)
   - Convert se_portal_group->tpg_lun_list[] to RCU hlist (nab + hch +
     paulmck)
   - Simplify target backend driver registration (hch)
   - Consolidate + simplify target backend attribute implementations
     (hch + nab)
   - Subsume se_port + t10_alua_tg_pt_gp_member into se_lun (hch)
   - Drop lun_sep_lock for se_lun->lun_se_dev RCU usage (hch + nab)
   - Drop unnecessary core_tpg_register TFO parameter (nab)
   - Use 64-bit LUNs tree-wide (hannes)
   - Drop left-over TARGET_MAX_LUNS_PER_TRANSPORT limit (hannes)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (76 commits)
  target: Bump core version to v5.0
  target: remove target_core_configfs.h
  target: remove unused TARGET_CORE_CONFIG_ROOT define
  target: consolidate version defines
  target: implement WRITE_SAME with UNMAP bit using ->execute_unmap
  target: simplify UNMAP handling
  target: replace se_cmd->execute_rw with a protocol_data field
  target/user: Fix inconsistent kmap_atomic/kunmap_atomic
  target: Send UA when changing LUN inventory
  target: Send UA upon LUN RESET tmr completion
  target: Send UA on ALUA target port group change
  target: Convert se_lun->lun_deve_lock to normal spinlock
  target: use 'se_dev_entry' when allocating UAs
  target: Remove 'ua_nacl' pointer from se_ua structure
  target_core_alua: Correct UA handling when switching states
  xen-scsiback: Fix compile warning for 64-bit LUN
  target: Remove TARGET_MAX_LUNS_PER_TRANSPORT
  target: use 64-bit LUNs
  target: Drop duplicate + unused se_dev_check_wce
  target: Drop unnecessary core_tpg_register TFO parameter
  ...
2015-07-04 14:13:43 -07:00
Christoph Hellwig 6de2ce5b8c target: remove target_core_configfs.h
The remaining defintions are private to the target core and can be merged
into target_core_internal.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-23 00:43:51 -07:00
Hannes Reinecke 196e2e2aa3 target: Remove TARGET_MAX_LUNS_PER_TRANSPORT
LUN allocation is now fully dynamic, so there is no need to
artificially restrain the number of exported LUNs.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-15 23:26:03 -07:00
Hannes Reinecke f2d3068020 target: use 64-bit LUNs
As we're now using a list to hold the LUNs the target core
can now converted to use 64-bit LUNs internally.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-15 23:26:01 -07:00
Nicholas Bellinger bc0c94b140 target: Drop unnecessary core_tpg_register TFO parameter
This patch drops unnecessary target_core_fabric_ops parameter usage
for core_tpg_register() during fabric driver TFO->fabric_make_tpg()
se_portal_group creation callback execution.

Instead, use the existing se_wwn->wwn_tf->tf_ops pointer to ensure
fabric driver is really using the same TFO provided at module_init
time.

Also go ahead and drop the forward TFO declarations tree-wide, and
handling the special case for iscsi-target discovery TPG.

Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-15 23:23:22 -07:00
Bart Van Assche ba92999252 target: Minimize SCSI header #include directives
Only include SCSI initiator header files in target code that needs
these header files, namely the SCSI pass-through code and the tcm_loop
driver. Change SCSI_SENSE_BUFFERSIZE into TRANSPORT_SENSE_BUFFER in
target code because the former is intended for initiator code and the
latter for target code. With this patch the only initiator include
directives in target code that remain are as follows:

$ git grep -nHE 'include .scsi/(scsi.h|scsi_host.h|scsi_device.h|scsi_cmnd.h)' drivers/target drivers/infiniband/ulp/{isert,srpt} drivers/usb/gadget/legacy/tcm_*.[ch] drivers/{vhost,xen} include/{target,trace/events/target.h}
drivers/target/loopback/tcm_loop.c:29:#include <scsi/scsi.h>
drivers/target/loopback/tcm_loop.c:31:#include <scsi/scsi_host.h>
drivers/target/loopback/tcm_loop.c:32:#include <scsi/scsi_device.h>
drivers/target/loopback/tcm_loop.c:33:#include <scsi/scsi_cmnd.h>
drivers/target/target_core_pscsi.c:39:#include <scsi/scsi_device.h>
drivers/target/target_core_pscsi.c:40:#include <scsi/scsi_host.h>
drivers/xen/xen-scsiback.c:52:#include <scsi/scsi_host.h> /* SG_ALL */

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-02 08:03:25 -07:00
Nicholas Bellinger 9e37d042cf target: Drop se_lun->lun_active for existing percpu lun_ref
With se_port_t and t10_alua_tg_pt_gp_member being absored into se_lun,
there is no need for an extra atomic_t based reference count for PR
ALL_TG_PT=1 and ALUA access state transition.

Go ahead and use the existing percpu se_lun->lun_ref instead, and
convert the two special cases to percpu_ref_tryget_live() to avoid
se_lun if transport_clear_lun_ref() has already been invoked to
shutdown the se_lun.

Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01 00:27:56 -07:00
Nicholas Bellinger 4cc987eaff target: Drop lun_sep_lock for se_lun->lun_se_dev RCU usage
With se_port and t10_alua_tg_pt_gp_member being absored into se_lun,
there is no need for an extra lock to protect se_lun->lun_se_dev
assignment.

This patch also converts backend drivers to use call_rcu() release
to allow any se_device readers to complete.  The call_rcu() instead
of kfree_rcu() is required here because se_device is embedded into
the backend driver specific structure.

Also, convert se_lun->lun_stats to use atomic_long_t within the
target_complete_ok_work() completion callback, and add FIXME for
transport_lookup_tmr_lun() with se_lun->lun_ref.

Finally, update sbp_update_unit_directory() special case usage with
proper rcu_dereference_raw() and configfs symlink comment.

Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Chris Boot <bootc@bootc.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01 00:27:38 -07:00
Christoph Hellwig adf653f92f target: Subsume se_port + t10_alua_tg_pt_gp_member into se_lun
This patch eliminates all se_port + t10_alua_tg_pt_gp_member usage,
and converts current users to direct se_lun pointer dereference.

This includes the removal of core_export_port(), core_release_port()
core_dev_export() and core_dev_unexport().  Along with conversion
of special case se_lun pointer dereference within PR ALL_TG_PT=1
and ALUA access state transition UNIT_ATTENTION handling.

Also, update core_enable_device_list_for_node() to reference the
new per se_lun->lun_deve_list when creating a new entry, or
replacing an existing one via RCU.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01 00:26:38 -07:00
Bart Van Assche b3eeea6619 target: Simplify LUN shutdown code
Instead of starting a thread from transport_clear_lun_ref() that
waits for LUN shutdown, wait in that function for LUN shutdown
to finish. Additionally, change the return type of
transport_clear_lun_ref() from int to void.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01 00:25:39 -07:00
Nicholas Bellinger 4624773765 target: Drop left-over se_lun->lun_status
Now that se_portal_group->tpg_lun_hlist is a RCU protected hlist,
go ahead and drop the left-over lun->lun_status usage.

Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01 00:25:25 -07:00
Nicholas Bellinger df9766ca9d target: Only reset specific dynamic entries during lun_group creation
This patch changes core_tpg_add_node_to_devs() to avoid unnecessarly
resetting every se_dev_entry in se_node_acl->tpg_lun_hlist when the
operation is driven by an explicit configfs se_lun->lun_group creation
via core_dev_add_lun() to only update a single se_lun.

Otherwise for the second core_tpg_check_initiator_node_acl() case, go
ahead and continue to scan the full set of currently active se_lun in
se_portal_group->tpg_lun_hlist.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01 00:25:15 -07:00
Nicholas Bellinger 84786546b6 target: Drop unused se_lun->lun_acl_list
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01 00:25:04 -07:00
Nicholas Bellinger 22793de590 target: Convert core_tpg_deregister to use list splice
This patch converts core_tpg_deregister() to perform a list splice
for any remaining dynamically generated se_node_acls attached to
se_tpg, before calling kfree(nacl) to free memory.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01 00:24:54 -07:00
Nicholas Bellinger 403edd78a2 target: Convert se_tpg->acl_node_lock to ->acl_node_mutex
This patch converts se_tpg->acl_node_lock to struct mutex, so that
->acl_node_acl walkers in core_clear_lun_from_tpg() can block when
calling core_disable_device_list_for_node().

It also updates core_dev_add_lun() to hold ->acl_node_mutex when
calling core_tpg_add_node_to_devs() to build ->lun_entry_hlist
for dynamically generated se_node_acl.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01 00:24:44 -07:00
Nicholas Bellinger 6bb826121b target: Convert se_portal_group->tpg_lun_list[] to RCU hlist
This patch converts the fixed size se_portal_group->tpg_lun_list[]
to use modern RCU with hlist_head in order to support an arbitary
number of se_lun ports per target endpoint.

It includes dropping core_tpg_alloc_lun() from core_dev_add_lun(),
and calling it directly from target_fabric_make_lun() to allocate
a new se_lun.  And add a new target_fabric_port_release() configfs
item callback to invoke kfree_rcu() to release memory during
se_lun->lun_group shutdown.

Also now that se_node_acl->lun_entry_hlist is using RCU, convert
existing tpg_lun_lock to struct mutex so core_tpg_add_node_to_devs()
can perform RCU updater logic without releasing ->tpg_lun_mutex.

Also, drop core_tpg_clear_object_luns() and it's single consumer
in iscsi-target, which is duplicating TPG LUN shutdown logic and
is current code results in a NOP.

Finally, sbp-target and xen-scsiback fabric driver conversions are
included, which are required due to the non-standard way they use
->tpg_lun_hlist.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Chris Boot <bootc@bootc.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01 00:24:33 -07:00
Nicholas Bellinger 29a05deebf target: Convert se_node_acl->device_list[] to RCU hlist
This patch converts se_node_acl->device_list[] table for mappedluns
to modern RCU hlist_head usage in order to support an arbitrary number
of node_acl lun mappings.

It converts transport_lookup_*_lun() fast-path code to use RCU read path
primitives when looking up se_dev_entry.  It adds a new hlist_head at
se_node_acl->lun_entry_hlist for this purpose.

For transport_lookup_cmd_lun() code, it works with existing per-cpu
se_lun->lun_ref when associating se_cmd with se_lun + se_device.
Also, go ahead and update core_create_device_list_for_node() +
core_free_device_list_for_node() to use ->lun_entry_hlist.

It also converts se_dev_entry->pr_ref_count access to use modern
struct kref counting, and updates core_disable_device_list_for_node()
to kref_put() and block on se_deve->pr_comp waiting for outstanding PR
special-case PR references to drop, then invoke kfree_rcu() to wait
for the RCU grace period to complete before releasing memory.

So now that se_node_acl->lun_entry_hlist fast path access uses RCU
protected pointers, go ahead and convert remaining non-fast path
RCU updater code using ->lun_entry_lock to struct mutex to allow
callers to block while walking se_node_acl->lun_entry_hlist.

Finally drop the left-over core_clear_initiator_node_from_tpg() that
originally cleared lun_access during se_node_acl shutdown, as post
RCU conversion it now becomes duplicated logic.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01 00:23:46 -07:00
Christoph Hellwig e4aae5af81 target: change core_tpg_register prototype
Remove the unneeded fabric_ptr argument, and change the type argument
to pass in a SPC protocol identifier.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30 22:42:27 -07:00
Christoph Hellwig 144bc4c2a4 target: move node ACL allocation to core code
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30 22:42:23 -07:00
Christoph Hellwig e413f47270 target: refactor node ACL allocation
Split out two common helpers to share code for allocating and initializing
node ACLs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30 22:41:52 -07:00
Christoph Hellwig c7d6a80392 target: refactor init/drop_nodeacl methods
By always allocating and adding, respectively removing and freeing
the se_node_acl structure in core code we can remove tons of repeated
code in the init_nodeacl and drop_nodeacl routines.  Additionally
this now respects the get_default_queue_depth method in this code
path as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30 22:41:51 -07:00
Christoph Hellwig e1750d20e6 target: make the tpg_get_default_depth method optional
All fabric drivers except for iSCSI always return 1, so implement
that as default behavior.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30 22:41:50 -07:00
Christoph Hellwig 9ac8928e6a target: simplify the target template registration API
Instead of calling target_fabric_configfs_init() +
target_fabric_configfs_register() / target_fabric_configfs_deregister()
target_fabric_configfs_free() from every target driver, rewrite the API
so that we have simple register/unregister functions that operate on
a const operations vector.

This patch also fixes a memory leak in several target drivers. Several
target drivers namely called target_fabric_configfs_deregister()
without calling target_fabric_configfs_free().

A large part of this patch is based on earlier changes from
Bart Van Assche <bart.vanassche@sandisk.com>.

(v2: Add a new TF_CIT_SETUP_DRV macro so that the core configfs code
can declare attributes as either core only or for drivers)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-14 12:28:41 -07:00
Linus Torvalds c3351dfabf Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "Here are the target updates for v3.18-rc2 code.  These where
  originally destined for -rc1, but due to the combination of travel
  last week for KVM Forum and my mistake of taking the three week merge
  window literally, the pull request slipped..  Apologies for that.

  Things where reasonably quiet this round.  The highlights include:

   - New userspace backend driver (target_core_user.ko) by Shaohua Li
     and Andy Grover
   - A number of cleanups in target, iscsi-taret and qla_target code
     from Joern Engel
   - Fix an OOPs related to queue full handling with CHECK_CONDITION
     status from Quinn Tran
   - Fix to disable TX completion interrupt coalescing in iser-target,
     that was causing problems on some hardware
   - Fix for PR APTPL metadata handling with demo-mode ACLs

  I'm most excited about the new backend driver that uses UIO + shared
  memory ring to dispatch I/O and control commands into user-space.
  This was probably the most requested feature by users over the last
  couple of years, and opens up a new area of development + porting of
  existing user-space storage applications to LIO.  Thanks to Shaohua +
  Andy for making this happen.

  Also another honorable mention, a new Xen PV SCSI driver was merged
  via the xen/tip.git tree recently, which puts us now at 10 target
  drivers in upstream! Thanks to David Vrabel + Juergen Gross for their
  work to get this code merged"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits)
  target/file: fix inclusive vfs_fsync_range() end
  iser-target: Disable TX completion interrupt coalescing
  target: Add force_pr_aptpl device attribute
  target: Fix APTPL metadata handling for dynamic MappedLUNs
  qla_target: don't delete changed nacls
  target/user: Recalculate pad size inside is_ring_space_avail()
  tcm_loop: Fixup tag handling
  iser-target: Fix smatch warning
  target/user: Fix up smatch warnings in tcmu_netlink_event
  target: Add a user-passthrough backstore
  target: Add documentation on the target userspace pass-through driver
  uio: Export definition of struct uio_device
  target: Remove unneeded check in sbc_parse_cdb
  target: Fix queue full status NULL pointer for SCF_TRANSPORT_TASK_SENSE
  qla_target: rearrange struct qla_tgt_prm
  qla_target: improve qlt_unmap_sg()
  qla_target: make some global functions static
  qla_target: remove unused parameter
  target: simplify core_tmr_abort_task
  target: encapsulate smp_mb__after_atomic()
  ...
2014-10-21 13:06:38 -07:00
Nicholas Bellinger e24805637d target: Fix APTPL metadata handling for dynamic MappedLUNs
This patch fixes a bug in handling of SPC-3 PR Activate Persistence
across Target Power Loss (APTPL) logic where re-creation of state for
MappedLUNs from dynamically generated NodeACLs did not occur during
I_T Nexus establishment.

It adds the missing core_scsi3_check_aptpl_registration() call during
core_tpg_check_initiator_node_acl() -> core_tpg_add_node_to_devs() in
order to replay any pre-loaded APTPL metadata state associated with
the newly connected SCSI Initiator Port.

Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-04 05:40:19 +00:00
Andy Grover 9c7d6154bc target: Remove core_tpg_release_virtual_lun0 function
Simple and just called from one place.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-01 14:38:57 -07:00
Andy Grover cd9d7cbaec target: Change core_dev_del_lun to take a se_lun instead of unpacked_lun
Remove core_tpg_pre_dellun entirely, since we don't need to get/check
a pointer we already have.

Nothing else can return an error, so core_dev_del_lun can return void.

Rename core_tpg_post_dellun to remove_lun - a clearer name, now that
pre_dellun is gone.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-01 14:38:48 -07:00
Andy Grover cc83881f2c target: core_tpg_post_dellun can return void
Nothing in it can raise an error.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-01 14:38:41 -07:00
Tejun Heo 2aad2a86f6 percpu_ref: add PERCPU_REF_INIT_* flags
With the recent addition of percpu_ref_reinit(), percpu_ref now can be
used as a persistent switch which can be turned on and off repeatedly
where turning off maps to killing the ref and waiting for it to drain;
however, there currently isn't a way to initialize a percpu_ref in its
off (killed and drained) state, which can be inconvenient for certain
persistent switch use cases.

Similarly, percpu_ref_switch_to_atomic/percpu() allow dynamic
selection of operation mode; however, currently a newly initialized
percpu_ref is always in percpu mode making it impossible to avoid the
latency overhead of switching to atomic mode.

This patch adds @flags to percpu_ref_init() and implements the
following flags.

* PERCPU_REF_INIT_ATOMIC	: start ref in atomic mode
* PERCPU_REF_INIT_DEAD		: start ref killed and drained

These flags should be able to serve the above two use cases.

v2: target_core_tpg.c conversion was missing.  Fixed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
2014-09-24 13:31:50 -04:00
Tejun Heo a34375ef9e percpu-refcount: add @gfp to percpu_ref_init()
Percpu allocator now supports allocation mask.  Add @gfp to
percpu_ref_init() so that !GFP_KERNEL allocation masks can be used
with percpu_refs too.

This patch doesn't make any functional difference.

v2: blk-mq conversion was missing.  Updated.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Jens Axboe <axboe@kernel.dk>
2014-09-08 09:51:30 +09:00
Tejun Heo 9a1049da9b percpu-refcount: require percpu_ref to be exited explicitly
Currently, a percpu_ref undoes percpu_ref_init() automatically by
freeing the allocated percpu area when the percpu_ref is killed.
While seemingly convenient, this has the following niggles.

* It's impossible to re-init a released reference counter without
  going through re-allocation.

* In the similar vein, it's impossible to initialize a percpu_ref
  count with static percpu variables.

* We need and have an explicit destructor anyway for failure paths -
  percpu_ref_cancel_init().

This patch removes the automatic percpu counter freeing in
percpu_ref_kill_rcu() and repurposes percpu_ref_cancel_init() into a
generic destructor now named percpu_ref_exit().  percpu_ref_destroy()
is considered but it gets confusing with percpu_ref_kill() while
"exit" clearly indicates that it's the counterpart of
percpu_ref_init().

All percpu_ref_cancel_init() users are updated to invoke
percpu_ref_exit() instead and explicit percpu_ref_exit() calls are
added to the destruction path of all percpu_ref users.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Li Zefan <lizefan@huawei.com>
2014-06-28 08:10:14 -04:00
Linus Torvalds 4e13c5d021 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

  - add support for SCSI Referrals (Hannes)
  - add support for T10 DIF into target core (nab + mkp)
  - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab)
  - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab)
  - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi)
  - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn)
  - allow percpu_ida_alloc() to receive task state bitmask (Kent)
  - fix >= v3.12 iscsi-target session reset hung task regression (nab)
  - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab)
  - fix a long-standing network portal creation race (Andy)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits)
  target: Fix percpu_ref_put race in transport_lun_remove_cmd
  target/iscsi: Fix network portal creation race
  target: Report bad sector in sense data for DIF errors
  iscsi-target: Convert gfp_t parameter to task state bitmask
  iscsi-target: Fix connection reset hang with percpu_ida_alloc
  percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask
  iscsi-target: Pre-allocate more tags to avoid ack starvation
  qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport
  qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO.
  qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure
  IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine
  IB/isert: Move fastreg descriptor creation to a function
  IB/isert: Avoid frwr notation, user fastreg
  IB/isert: seperate connection protection domains and dma MRs
  tcm_loop: Enable DIF/DIX modes in SCSI host LLD
  target/rd: Add DIF protection into rd_execute_rw
  target/rd: Add support for protection SGL setup + release
  target/rd: Refactor rd_build_device_space + rd_release_device_space
  target/file: Add DIF protection support to fd_execute_rw
  target/file: Add DIF protection init/format support
  ...
2014-01-31 15:31:23 -08:00