Граф коммитов

3660 Коммитов

Автор SHA1 Сообщение Дата
Benjamin Herrenschmidt b72c1f6514 powerpc: Make radeon 32-bit MSI quirk work on powernv
This moves the quirk itself to pci_64.c as to get built on all ppc64
platforms (the only ones with a pci_dn), factors the two implementations
of get_pdn() into a single pci_get_dn() and use the quirk to do 32-bit
MSIs on IODA based powernv platforms.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24 18:13:45 +10:00
Michael Ellerman 59affcd3e4 powerpc: Context switch more PMU related SPRs
In commit 9353374 "Context switch the new EBB SPRs" we added support for
context switching some new EBB SPRs. However despite four of us signing
off on that patch we missed some. To be fair these are not actually new
SPRs, but they are now potentially user accessible so need to be context
switched.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24 18:13:45 +10:00
Benjamin Herrenschmidt bee7dd9c5f powerpc/pci: Fix bogus message at boot about empty memory resources
The message is only meant to be displayed if resource 0 is empty,
but was displayed if any is.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24 18:13:44 +10:00
Benjamin Herrenschmidt 8fc1f5d7ef powerpc: Fix TLB cleanup at boot on POWER8
The TLB has 512 congruence classes (2048 entries 4 way set associative)
while P7 had 128

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-24 18:13:44 +10:00
Linus Torvalds a2c7a54fcc Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Benjamin Herrenschmidt:
 "This is mostly bug fixes (some of them regressions, some of them I
  deemed worth merging now) along with some patches from Li Zhong
  hooking up the new context tracking stuff (for the new full NO_HZ)"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits)
  powerpc: Set show_unhandled_signals to 1 by default
  powerpc/perf: Fix setting of "to" addresses for BHRB
  powerpc/pmu: Fix order of interpreting BHRB target entries
  powerpc/perf: Move BHRB code into CONFIG_PPC64 region
  powerpc: select HAVE_CONTEXT_TRACKING for pSeries
  powerpc: Use the new schedule_user API on userspace preemption
  powerpc: Exit user context on notify resume
  powerpc: Exception hooks for context tracking subsystem
  powerpc: Syscall hooks for context tracking subsystem
  powerpc/booke64: Fix kernel hangs at kernel_dbg_exc
  powerpc: Fix irq_set_affinity() return values
  powerpc: Provide __bswapdi2
  powerpc/powernv: Fix starting of secondary CPUs on OPALv2 and v3
  powerpc/powernv: Detect OPAL v3 API version
  powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning again
  powerpc: Make CONFIG_RTAS_PROC depend on CONFIG_PROC_FS
  powerpc: Bring all threads online prior to migration/hibernation
  powerpc/rtas_flash: Fix validate_flash buffer overflow issue
  powerpc/kexec: Fix kexec when using VMX optimised memcpy
  powerpc: Fix build errors STRICT_MM_TYPECHECKS
  ...
2013-05-14 07:43:11 -07:00
Benjamin Herrenschmidt e34166ad63 powerpc: Set show_unhandled_signals to 1 by default
Just like other architectures

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 18:01:04 +10:00
Li Zhong 5d1c574511 powerpc: Use the new schedule_user API on userspace preemption
This patch corresponds to
[PATCH] x86: Use the new schedule_user API on userspace preemption
  commit 0430499ce9

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 16:00:20 +10:00
Li Zhong 106ed886ab powerpc: Exit user context on notify resume
This patch allows RCU usage in do_notify_resume, e.g. signal handling.
It corresponds to
[PATCH] x86: Exit RCU extended QS on notify resume
  commit edf55fda35

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 16:00:20 +10:00
Li Zhong ba12eedee3 powerpc: Exception hooks for context tracking subsystem
This is the exception hooks for context tracking subsystem, including
data access, program check, single step, instruction breakpoint, machine check,
alignment, fp unavailable, altivec assist, unknown exception, whose handlers
might use RCU.

This patch corresponds to
[PATCH] x86: Exception hooks for userspace RCU extended QS
  commit 6ba3c97a38

But after the exception handling moved to generic code, and some changes in
following two commits:
56dd9470d7
  context_tracking: Move exception handling to generic code
6c1e0256fa
  context_tracking: Restore correct previous context state on exception exit

it is able for exception hooks to use the generic code above instead of a
redundant arch implementation.

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 16:00:19 +10:00
Li Zhong 22ecbe8dce powerpc: Syscall hooks for context tracking subsystem
This is the syscall slow path hooks for context tracking subsystem,
corresponding to
[PATCH] x86: Syscall hooks for userspace RCU extended QS
  commit bf5a3c13b9

TIF_MEMDIE is moved to the second 16-bits (with value 17), as it seems there
is no asm code using it. TIF_NOHZ is added to _TIF_SYCALL_T_OR_A, so it is
better for it to be in the same 16 bits with others in the group, so in the
asm code, andi. with this group could work.

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 16:00:19 +10:00
Scott Wood 6cecf76b47 powerpc/booke64: Fix kernel hangs at kernel_dbg_exc
MSR_DE is not cleared on entry to the kernel, and we don't clear it
explicitly outside of debug code.  If we have MSR_DE set in
prime_debug_regs(), and the new thread has events enabled in DBCR0
(e.g.  ICMP is set in thread->dbsr0, even though it was cleared in the
real DBCR0 when the thread got scheduled out), we'll end up taking a
debug exception in the kernel when DBCR0 is loaded.  DSRR0 will not
point to an exception vector, and the kernel ends up hanging at
kernel_dbg_exc.  Fix this by always clearing MSR_DE when we load new
debug state.

Another observed source of kernel_dbg_exc hangs is with the branch
taken event.  If this event is active, but we take a non-debug trap
(e.g. a TLB miss or an asynchronous interrupt) before the next branch.
We end up taking a branch-taken debug exception on the initial branch
instruction of the exception vector, but because the debug exception is
DBSR_BT rather than DBSR_IC we branch to kernel_dbg_exc before even
checking the DSRR0 address.  Fix this by checking for DBSR_BT as well
as DBSR_IC, which is what 32-bit does and what the comments suggest was
intended in the 64-bit code as well.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 16:00:19 +10:00
David Woodhouse ca9d7aea59 powerpc: Provide __bswapdi2
Some versions of GCC apparently expect this to be provided by libgcc.

Updates from Mikey to fix 32 bit version and adding "r" to registers.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 16:00:17 +10:00
Li Zhong af945cf4bf powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning again
Saw this warning again, and this time from the ret_from_fork path.

It seems we could clear the back chain earlier in copy_thread(), which
could cover both path, and also fix potential lockdep usage in
schedule_tail(), or exception occurred before we clear the back chain.

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 14:36:35 +10:00
Robert Jennings 120496ac2d powerpc: Bring all threads online prior to migration/hibernation
This patch brings online all threads which are present but not online
prior to migration/hibernation.  After migration/hibernation those
threads are taken back offline.

During migration/hibernation all online CPUs must call H_JOIN, this is
required by the hypervisor.  Without this patch, threads that are offline
(H_CEDE'd) will not be woken to make the H_JOIN call and the OS will be
deadlocked (all threads either JOIN'd or CEDE'd).

Cc: <stable@kernel.org>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 14:36:29 +10:00
Vasant Hegde a94a14720e powerpc/rtas_flash: Fix validate_flash buffer overflow issue
ibm,validate-flash-image RTAS call output buffer contains 150 - 200
bytes of data on latest system. Presently we have output
buffer size as 64 bytes and we use sprintf to copy data from
RTAS buffer to local buffer. This causes kernel oops (see below
call trace).

This patch increases local buffer size to 256 and also uses
snprintf instead of sprintf to copy data from RTAS buffer.

Kernel call trace :
-------------------
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=1024 NUMA pSeries
Modules linked in: nfs fscache lockd auth_rpcgss nfs_acl sunrpc fuse loop dm_mod ipv6 ipv6_lib usb_storage ehea(X) sr_mod qlge ses cdrom enclosure st be2net sg ext3 jbd mbcache usbhid hid ohci_hcd ehci_hcd usbcore qla2xxx usb_common sd_mod crc_t10dif scsi_dh_hp_sw scsi_dh_rdac scsi_dh_alua scsi_dh_emc scsi_dh lpfc scsi_transport_fc scsi_tgt ipr(X) libata scsi_mod
Supported: Yes
NIP: 4520323031333130 LR: 4520323031333130 CTR: 0000000000000000
REGS: c0000001b91779b0 TRAP: 0400   Tainted: G            X  (3.0.13-0.27-ppc64)
MSR: 8000000040009032 <EE,ME,IR,DR>  CR: 44022488  XER: 20000018
TASK = c0000001bca1aba0[4736] 'cat' THREAD: c0000001b9174000 CPU: 36
GPR00: 4520323031333130 c0000001b9177c30 c000000000f87c98 000000000000009b
GPR04: c0000001b9177c4a 000000000000000b 3520323031333130 2032303133313031
GPR08: 3133313031350a4d 000000000000009b 0000000000000000 c0000000003664a4
GPR12: 0000000022022448 c000000003ee6c00 0000000000000002 00000000100e8a90
GPR16: 00000000100cb9d8 0000000010093370 000000001001d310 0000000000000000
GPR20: 0000000000008000 00000000100fae60 000000000000005e 0000000000000000
GPR24: 0000000010129350 46573738302e3030 2046573738302e30 300a4d4720323031
GPR28: 333130313520554e 4b4e4f574e0a4d47 2032303133313031 3520323031333130
NIP [4520323031333130] 0x4520323031333130
LR [4520323031333130] 0x4520323031333130
Call Trace:
[c0000001b9177c30] [4520323031333130] 0x4520323031333130 (unreliable)
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 14:36:26 +10:00
Anton Blanchard 79c66ce8f6 powerpc/kexec: Fix kexec when using VMX optimised memcpy
commit b3f271e86e (powerpc: POWER7 optimised memcpy using VMX and
enhanced prefetch) uses VMX when it is safe to do so (ie not in
interrupt). It also looks at the task struct to decide if we have to
save the current tasks' VMX state.

kexec calls memcpy() at a point where the task struct may have been
overwritten by the new kexec segments. If it has been overwritten
then when memcpy -> enable_altivec looks up current->thread.regs->msr
we get a cryptic oops or lockup.

I also notice we aren't initialising thread_info->cpu, which means
smp_processor_id is broken. Fix that too.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: <stable@vger.kernel.org> # 3.6+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 14:36:23 +10:00
Aneesh Kumar K.V 83d5e64b7e powerpc: Fix build errors STRICT_MM_TYPECHECKS
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14 14:36:20 +10:00
Linus Torvalds c4cc75c332 Merge git://git.infradead.org/users/eparis/audit
Pull audit changes from Eric Paris:
 "Al used to send pull requests every couple of years but he told me to
  just start pushing them to you directly.

  Our touching outside of core audit code is pretty straight forward.  A
  couple of interface changes which hit net/.  A simple argument bug
  calling audit functions in namei.c and the removal of some assembly
  branch prediction code on ppc"

* git://git.infradead.org/users/eparis/audit: (31 commits)
  audit: fix message spacing printing auid
  Revert "audit: move kaudit thread start from auditd registration to kaudit init"
  audit: vfs: fix audit_inode call in O_CREAT case of do_last
  audit: Make testing for a valid loginuid explicit.
  audit: fix event coverage of AUDIT_ANOM_LINK
  audit: use spin_lock in audit_receive_msg to process tty logging
  audit: do not needlessly take a lock in tty_audit_exit
  audit: do not needlessly take a spinlock in copy_signal
  audit: add an option to control logging of passwords with pam_tty_audit
  audit: use spin_lock_irqsave/restore in audit tty code
  helper for some session id stuff
  audit: use a consistent audit helper to log lsm information
  audit: push loginuid and sessionid processing down
  audit: stop pushing loginid, uid, sessionid as arguments
  audit: remove the old depricated kernel interface
  audit: make validity checking generic
  audit: allow checking the type of audit message in the user filter
  audit: fix build break when AUDIT_DEBUG == 2
  audit: remove duplicate export of audit_enabled
  Audit: do not print error when LSMs disabled
  ...
2013-05-11 14:29:11 -07:00
Linus Torvalds 3644bc2ec7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull stray syscall bits from Al Viro:
 "Several syscall-related commits that were missing from the original"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  switch compat_sys_sysctl to COMPAT_SYSCALL_DEFINE
  unicore32: just use mmap_pgoff()...
  unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINE
  x86, vm86: fix VM86 syscalls: use SYSCALL_DEFINEx(...)
2013-05-10 09:21:05 -07:00
Al Viro 91c2e0bcae unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINE
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-09 13:46:38 -04:00
Alistair Popple 30650239ad powerpc: Add an in memory udbg console
This patch adds a new udbg early debug console which utilises
statically defined input and output buffers stored within the kernel
BSS. It is primarily designed to assist with bring up of new hardware
which may not have a working console but which has a method of
reading/writing kernel memory.

This version incorporates comments made by Ben H (thanks!).

Changes from v1:
	- Add memory barriers.
	- Ensure updating of read/write positions is atomic.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-08 06:36:49 +10:00
Benjamin Herrenschmidt d5dae72130 powerpc/topology: Fix spurr attribute permission
We are registering the attribute with permission 0600 but it
doesn't have a store callback, which causes WARN_ON's during
boot. Fix the permission.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 15:02:40 +10:00
Benjamin Herrenschmidt 3fd47f063b powerpc/pci: Support per-aperture memory offset
The PCI core supports an offset per aperture nowadays but our arch
code still has a single offset per host bridge representing the
difference betwen CPU memory addresses and PCI MMIO addresses.

This is a problem as new machines and hypervisor versions are
coming out where the 64-bit windows will have a different offset
(basically mapped 1:1) from the 32-bit windows.

This fixes it by using separate offsets. In the long run, we probably
want to get rid of that intermediary struct pci_controller and have
those directly stored into the pci_host_bridge as they are parsed
but this will be a more invasive change.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 13:40:40 +10:00
Benjamin Herrenschmidt a0b8e76fac powerpc/pci: Don't add bogus empty resources to PHBs
When converting to use the new pci_add_resource_offset() we didn't
properly account for empty resources (0 flags) and add those bogons
to the PHBs. The result is some annoying messages in the log.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 09:25:41 +10:00
Nishanth Aravamudan 748645bf06 powerpc/cputable: Advertise support for ISEL/HTM/DSCR/TAR on POWER8
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 09:25:40 +10:00
Nishanth Aravamudan 6c1bf48275 powerpc/cputable: Advertise ISEL support on appropriate embedded processors
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 09:25:39 +10:00
Nishanth Aravamudan 4a1ae4f3c5 powerpc/cputable: Advertise DSCR support on P7/P7+
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 09:25:39 +10:00
Kleber Sacilotto de Souza d82fb31abc powerpc/pseries: Perform proper max_bus_speed detection
On pseries machines the detection for max_bus_speed should be done
through an OpenFirmware property. This patch adds a function to perform
this detection and a hook to perform dynamic adding of the function only
for pseries. This is done by overwriting the weak
pcibios_root_bridge_prepare function which is called by
pci_create_root_bus().

From: Lucas Kannebley Tavares <lucaskt@linux.vnet.ibm.com>
Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 09:25:38 +10:00
Anton Blanchard 73d2fb758e powerpc: Emulate non privileged DSCR read and write
POWER8 allows read and write of the DSCR in userspace. We added
kernel emulation so applications could always use the instructions
regardless of the CPU type.

Unfortunately there are two SPRs for the DSCR and we only added
emulation for the privileged one. Add code to match the non
privileged one.

A simple test was created to verify the fix:

http://ozlabs.org/~anton/junkcode/user_dscr_test.c

Without the patch we get a SIGILL and it passes with the patch.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06 09:25:35 +10:00
Linus Torvalds 01227a889e Merge tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Gleb Natapov:
 "Highlights of the updates are:

  general:
   - new emulated device API
   - legacy device assignment is now optional
   - irqfd interface is more generic and can be shared between arches

  x86:
   - VMCS shadow support and other nested VMX improvements
   - APIC virtualization and Posted Interrupt hardware support
   - Optimize mmio spte zapping

  ppc:
    - BookE: in-kernel MPIC emulation with irqfd support
    - Book3S: in-kernel XICS emulation (incomplete)
    - Book3S: HV: migration fixes
    - BookE: more debug support preparation
    - BookE: e6500 support

  ARM:
   - reworking of Hyp idmaps

  s390:
   - ioeventfd for virtio-ccw

  And many other bug fixes, cleanups and improvements"

* tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
  kvm: Add compat_ioctl for device control API
  KVM: x86: Account for failing enable_irq_window for NMI window request
  KVM: PPC: Book3S: Add API for in-kernel XICS emulation
  kvm/ppc/mpic: fix missing unlock in set_base_addr()
  kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write
  kvm/ppc/mpic: remove users
  kvm/ppc/mpic: fix mmio region lists when multiple guests used
  kvm/ppc/mpic: remove default routes from documentation
  kvm: KVM_CAP_IOMMU only available with device assignment
  ARM: KVM: iterate over all CPUs for CPU compatibility check
  KVM: ARM: Fix spelling in error message
  ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally
  KVM: ARM: Fix API documentation for ONE_REG encoding
  ARM: KVM: promote vfp_host pointer to generic host cpu context
  ARM: KVM: add architecture specific hook for capabilities
  ARM: KVM: perform HYP initilization for hotplugged CPUs
  ARM: KVM: switch to a dual-step HYP init code
  ARM: KVM: rework HYP page table freeing
  ARM: KVM: enforce maximum size for identity mapped code
  ARM: KVM: move to a KVM provided HYP idmap
  ...
2013-05-05 14:47:31 -07:00
Linus Torvalds 5a148af669 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc update from Benjamin Herrenschmidt:
 "The main highlights this time around are:

   - A pile of addition POWER8 bits and nits, such as updated
     performance counter support (Michael Ellerman), new branch history
     buffer support (Anshuman Khandual), base support for the new PCI
     host bridge when not using the hypervisor (Gavin Shan) and other
     random related bits and fixes from various contributors.

   - Some rework of our page table format by Aneesh Kumar which fixes a
     thing or two and paves the way for THP support.  THP itself will
     not make it this time around however.

   - More Freescale updates, including Altivec support on the new e6500
     cores, new PCI controller support, and a pile of new boards support
     and updates.

   - The usual batch of trivial cleanups & fixes"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (156 commits)
  powerpc: Fix build error for book3e
  powerpc: Context switch the new EBB SPRs
  powerpc: Turn on the EBB H/FSCR bits
  powerpc: Replace CPU_FTR_BCTAR with CPU_FTR_ARCH_207S
  powerpc: Setup BHRB instructions facility in HFSCR for POWER8
  powerpc: Fix interrupt range check on debug exception
  powerpc: Update tlbie/tlbiel as per ISA doc
  powerpc: Print page size info during boot
  powerpc: print both base and actual page size on hash failure
  powerpc: Fix hpte_decode to use the correct decoding for page sizes
  powerpc: Decode the pte-lp-encoding bits correctly.
  powerpc: Use encode avpn where we need only avpn values
  powerpc: Reduce PTE table memory wastage
  powerpc: Move the pte free routines from common header
  powerpc: Reduce the PTE_INDEX_SIZE
  powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format
  powerpc: New hugepage directory format
  powerpc: Don't truncate pgd_index wrongly
  powerpc: Don't hard code the size of pte page
  powerpc: Save DAR and DSISR in pt_regs on MCE
  ...
2013-05-02 10:16:16 -07:00
Linus Torvalds 20b4fb4852 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...
2013-05-01 17:51:54 -07:00
Michael Ellerman 9353374b8e powerpc: Context switch the new EBB SPRs
This context switches the new Event Based Branching (EBB) SPRs.  The three new
SPRs are:
  - Event Based Branch Handler Register (EBBHR)
  - Event Based Branch Return Register (EBBRR)
  - Branch Event Status and Control Register (BESCR)

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-02 10:37:36 +10:00
Michael Neuling 1ddf499e1a powerpc: Turn on the EBB H/FSCR bits
This turns Event Based Branching (EBB) on in the Hypervisor Facility Status and
Control Register (HFSCR) and Facility Status and Control Register (FSCR).

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-02 10:36:55 +10:00
Michael Ellerman 1de2bd4e0c powerpc: Replace CPU_FTR_BCTAR with CPU_FTR_ARCH_207S
We are getting low on cpu feature bits. So rather than add a separate bit for
every new Power8 feature, add a bit for arch 2.07 server catagory and use that
instead.

Hijack the value we had for BCTAR, but swap the value with CFAR so that all the
ARCH defines are together.

Note we don't touch CPU_FTR_TM, because it is conditionally enabled if
the kernel is built with TM support.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-02 10:35:16 +10:00
Anshuman Khandual 53b56ca019 powerpc: Setup BHRB instructions facility in HFSCR for POWER8
Make BHRB instructions available in problem and privileged states.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-02 10:35:15 +10:00
Bharat Bhushan fc2a6cfe05 powerpc: Fix interrupt range check on debug exception
We do not want to take single step and branch-taken debug exception
in kernel exception code. But the address range check was not covering
all kernel exception handlers address range.

With this patch we defined the interrupt_end label which defines the
end on kernel exception code. So now we check interrupt_base to
interrupt_end range for not handling debug exception in kernel
exception entry.

Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-02 10:31:01 +10:00
David Howells e8eeded3c5 ppc: Clean up rtas_flash driver somewhat
Clean up some of the problems with the rtas_flash driver:

 (1) It shouldn't fiddle with the internals of the procfs filesystem (altering
     pde->count).

 (2) If pid namespaces are in effect, then you can get multiple inodes
     connected to a single pde, thereby rendering the pde->count > 2 test
     useless.

 (3) The pde->count fudging doesn't work for forked, dup'd or cloned file
     descriptors, so add static mutexes and use them to wrap access to the
     driver through read, write and release methods.

 (4) The driver can only handle one device, so allocate most of the data
     previously attached to the pde->data as static variables instead (though
     allocate the validation data buffer with kmalloc).

 (5) We don't need to save the pde pointers as long as we have the filenames
     available for removal.

 (6) Don't try to multiplex what the update file read method does based on the
     filename.  Instead provide separate file ops and split the function.

Whilst we're at it, tabulate the procfile information and loop through it when
creating or destroying them rather than manually coding each one.

[Folded fixes from Vasant Hegde <hegdevasant@linux.vnet.ibm.com>]

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
cc: Paul Mackerras <paulus@samba.org>
cc: Anton Blanchard <anton@samba.org>
cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-01 17:29:45 -04:00
David Howells 271a15eabe proc: Supply PDE attribute setting accessor functions
Supply accessor functions to set attributes in proc_dir_entry structs.

The following are supplied: proc_set_size() and proc_set_user().

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
cc: linuxppc-dev@lists.ozlabs.org
cc: linux-media@vger.kernel.org
cc: netdev@vger.kernel.org
cc: linux-wireless@vger.kernel.org
cc: linux-pci@vger.kernel.org
cc: netfilter-devel@vger.kernel.org
cc: alsa-devel@alsa-project.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-01 17:29:18 -04:00
Linus Torvalds 08d7676083 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull compat cleanup from Al Viro:
 "Mostly about syscall wrappers this time; there will be another pile
  with patches in the same general area from various people, but I'd
  rather push those after both that and vfs.git pile are in."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  syscalls.h: slightly reduce the jungles of macros
  get rid of union semop in sys_semctl(2) arguments
  make do_mremap() static
  sparc: no need to sign-extend in sync_file_range() wrapper
  ppc compat wrappers for add_key(2) and request_key(2) are pointless
  x86: trim sys_ia32.h
  x86: sys32_kill and sys32_mprotect are pointless
  get rid of compat_sys_semctl() and friends in case of ARCH_WANT_OLD_COMPAT_IPC
  merge compat sys_ipc instances
  consolidate compat lookup_dcookie()
  convert vmsplice to COMPAT_SYSCALL_DEFINE
  switch getrusage() to COMPAT_SYSCALL_DEFINE
  switch epoll_pwait to COMPAT_SYSCALL_DEFINE
  convert sendfile{,64} to COMPAT_SYSCALL_DEFINE
  switch signalfd{,4}() to COMPAT_SYSCALL_DEFINE
  make SYSCALL_DEFINE<n>-generated wrappers do asmlinkage_protect
  make HAVE_SYSCALL_WRAPPERS unconditional
  consolidate cond_syscall and SYSCALL_ALIAS declarations
  teach SYSCALL_DEFINE<n> how to deal with long long/unsigned long long
  get rid of duplicate logics in __SC_....[1-6] definitions
2013-05-01 07:21:43 -07:00
Tejun Heo a43cb95d54 dump_stack: unify debug information printed by show_regs()
show_regs() is inherently arch-dependent but it does make sense to print
generic debug information and some archs already do albeit in slightly
different forms.  This patch introduces a generic function to print debug
information from show_regs() so that different archs print out the same
information and it's much easier to modify what's printed.

show_regs_print_info() prints out the same debug info as dump_stack()
does plus task and thread_info pointers.

* Archs which didn't print debug info now do.

  alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r,
  metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc,
  um, xtensa

* Already prints debug info.  Replaced with show_regs_print_info().
  The printed information is superset of what used to be there.

  arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86

* s390 is special in that it used to print arch-specific information
  along with generic debug info.  Heiko and Martin think that the
  arch-specific extra isn't worth keeping s390 specfic implementation.
  Converted to use the generic version.

Note that now all archs print the debug info before actual register
dumps.

An example BUG() dump follows.

 kernel BUG at /work/os/work/kernel/workqueue.c:4841!
 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7
 Hardware name: empty empty/S3992, BIOS 080011  10/26/2007
 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000
 RIP: 0010:[<ffffffff8234a07e>]  [<ffffffff8234a07e>] init_workqueues+0x4/0x6
 RSP: 0000:ffff88007c861ec8  EFLAGS: 00010246
 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001
 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a
 RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Stack:
  ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650
  0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d
  ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760
 Call Trace:
  [<ffffffff81000312>] do_one_initcall+0x122/0x170
  [<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8
  [<ffffffff81c47760>] ? rest_init+0x140/0x140
  [<ffffffff81c4776e>] kernel_init+0xe/0xf0
  [<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0
  [<ffffffff81c47760>] ? rest_init+0x140/0x140
  ...

v2: Typo fix in x86-32.

v3: CPU number dropped from show_regs_print_info() as
    dump_stack_print_info() has been updated to print it.  s390
    specific implementation dropped as requested by s390 maintainers.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>		[tile bits]
Acked-by: Richard Kuo <rkuo@codeaurora.org>		[hexagon bits]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:02 -07:00
Tejun Heo 196779b9b4 dump_stack: consolidate dump_stack() implementations and unify their behaviors
Both dump_stack() and show_stack() are currently implemented by each
architecture.  show_stack(NULL, NULL) dumps the backtrace for the
current task as does dump_stack().  On some archs, dump_stack() prints
extra information - pid, utsname and so on - in addition to the
backtrace while the two are identical on other archs.

The usages in arch-independent code of the two functions indicate
show_stack(NULL, NULL) should print out bare backtrace while
dump_stack() is used for debugging purposes when something went wrong,
so it does make sense to print additional information on the task which
triggered dump_stack().

There's no reason to require archs to implement two separate but mostly
identical functions.  It leads to unnecessary subtle information.

This patch expands the dummy fallback dump_stack() implementation in
lib/dump_stack.c such that it prints out debug information (taken from
x86) and invokes show_stack(NULL, NULL) and drops arch-specific
dump_stack() implementations in all archs except blackfin.  Blackfin's
dump_stack() does something wonky that I don't understand.

Debug information can be printed separately by calling
dump_stack_print_info() so that arch-specific dump_stack()
implementation can still emit the same debug information.  This is used
in blackfin.

This patch brings the following behavior changes.

* On some archs, an extra level in backtrace for show_stack() could be
  printed.  This is because the top frame was determined in
  dump_stack() on those archs while generic dump_stack() can't do that
  reliably.  It can be compensated by inlining dump_stack() but not
  sure whether that'd be necessary.

* Most archs didn't use to print debug info on dump_stack().  They do
  now.

An example WARN dump follows.

 WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505()
 Hardware name: empty
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9
  0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48
  ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c
  0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58
 Call Trace:
  [<ffffffff81c614dc>] dump_stack+0x19/0x1b
  [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0
  [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff8234a071>] init_workqueues+0x35/0x505
  ...

v2: CPU number added to the generic debug info as requested by s390
    folks and dropped the s390 specific dump_stack().  This loses %ksp
    from the debug message which the maintainers think isn't important
    enough to keep the s390-specific dump_stack() implementation.

    dump_stack_print_info() is moved to kernel/printk.c from
    lib/dump_stack.c.  Because linkage is per objecct file,
    dump_stack_print_info() living in the same lib file as generic
    dump_stack() means that archs which implement custom dump_stack()
    - at this point, only blackfin - can't use dump_stack_print_info()
    as that will bring in the generic version of dump_stack() too.  v1
    The v1 patch broke build on blackfin due to this issue.  The build
    breakage was reported by Fengguang Wu.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>	[s390 bits]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Richard Kuo <rkuo@codeaurora.org>		[hexagon bits]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:02 -07:00
Linus Torvalds 5d434fcb25 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
  code cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
  mm: Convert print_symbol to %pSR
  gfs2: Convert print_symbol to %pSR
  m32r: Convert print_symbol to %pSR
  iostats.txt: add easy-to-find description for field 6
  x86 cmpxchg.h: fix wrong comment
  treewide: Fix typo in printk and comments
  doc: devicetree: Fix various typos
  docbook: fix 8250 naming in device-drivers
  pata_pdc2027x: Fix compiler warning
  treewide: Fix typo in printks
  mei: Fix comments in drivers/misc/mei
  treewide: Fix typos in kernel messages
  pm44xx: Fix comment for "CONFIG_CPU_IDLE"
  doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
  mmzone: correct "pags" to "pages" in comment.
  kernel-parameters: remove outdated 'noresidual' parameter
  Remove spurious _H suffixes from ifdef comments
  sound: Remove stray pluses from Kconfig file
  radio-shark: Fix printk "CONFIG_LED_CLASS"
  doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
  ...
2013-04-30 09:36:50 -07:00
Linus Torvalds 8700c95adb Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP/hotplug changes from Ingo Molnar:
 "This is a pretty large, multi-arch series unifying and generalizing
  the various disjunct pieces of idle routines that architectures have
  historically copied from each other and have grown in random, wildly
  inconsistent and sometimes buggy directions:

   101 files changed, 455 insertions(+), 1328 deletions(-)

  this went through a number of review and test iterations before it was
  committed, it was tested on various architectures, was exposed to
  linux-next for quite some time - nevertheless it might cause problems
  on architectures that don't read the mailing lists and don't regularly
  test linux-next.

  This cat herding excercise was motivated by the -rt kernel, and was
  brought to you by Thomas "the Whip" Gleixner."

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  idle: Remove GENERIC_IDLE_LOOP config switch
  um: Use generic idle loop
  ia64: Make sure interrupts enabled when we "safe_halt()"
  sparc: Use generic idle loop
  idle: Remove unused ARCH_HAS_DEFAULT_IDLE
  bfin: Fix typo in arch_cpu_idle()
  xtensa: Use generic idle loop
  x86: Use generic idle loop
  unicore: Use generic idle loop
  tile: Use generic idle loop
  tile: Enter idle with preemption disabled
  sh: Use generic idle loop
  score: Use generic idle loop
  s390: Use generic idle loop
  powerpc: Use generic idle loop
  parisc: Use generic idle loop
  openrisc: Use generic idle loop
  mn10300: Use generic idle loop
  mips: Use generic idle loop
  microblaze: Use generic idle loop
  ...
2013-04-30 07:50:17 -07:00
Linus Torvalds e0972916e8 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Features:

   - Add "uretprobes" - an optimization to uprobes, like kretprobes are
     an optimization to kprobes.  "perf probe -x file sym%return" now
     works like kretprobes.  By Oleg Nesterov.

   - Introduce per core aggregation in 'perf stat', from Stephane
     Eranian.

   - Add memory profiling via PEBS, from Stephane Eranian.

   - Event group view for 'annotate' in --stdio, --tui and --gtk, from
     Namhyung Kim.

   - Add support for AMD NB and L2I "uncore" counters, by Jacob Shin.

   - Add Ivy Bridge-EP uncore support, by Zheng Yan

   - IBM zEnterprise EC12 oprofile support patchlet from Robert Richter.

   - Add perf test entries for checking breakpoint overflow signal
     handler issues, from Jiri Olsa.

   - Add perf test entry for for checking number of EXIT events, from
     Namhyung Kim.

   - Add perf test entries for checking --cpu in record and stat, from
     Jiri Olsa.

   - Introduce perf stat --repeat forever, from Frederik Deweerdt.

   - Add --no-demangle to report/top, from Namhyung Kim.

   - PowerPC fixes plus a couple of cleanups/optimizations in uprobes
     and trace_uprobes, by Oleg Nesterov.

  Various fixes and refactorings:

   - Fix dependency of the python binding wrt libtraceevent, from
     Naohiro Aota.

   - Simplify some perf_evlist methods and to allow 'stat' to share code
     with 'record' and 'trace', by Arnaldo Carvalho de Melo.

   - Remove dead code in related to libtraceevent integration, from
     Namhyung Kim.

   - Revert "perf sched: Handle PERF_RECORD_EXIT events" to get 'perf
     sched lat' back working, by Arnaldo Carvalho de Melo

   - We don't use Newt anymore, just plain libslang, by Arnaldo Carvalho
     de Melo.

   - Kill a bunch of die() calls, from Namhyung Kim.

   - Fix build on non-glibc systems due to libio.h absence, from Cody P
     Schafer.

   - Remove some perf_session and tracing dead code, from David Ahern.

   - Honor parallel jobs, fix from Borislav Petkov

   - Introduce tools/lib/lk library, initially just removing duplication
     among tools/perf and tools/vm.  from Borislav Petkov

  ... and many more I missed to list, see the shortlog and git log for
  more details."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (136 commits)
  perf/x86/intel/P4: Robistify P4 PMU types
  perf/x86/amd: Fix AMD NB and L2I "uncore" support
  perf/x86/amd: Remove old-style NB counter support from perf_event_amd.c
  perf/x86: Check all MSRs before passing hw check
  perf/x86/amd: Add support for AMD NB and L2I "uncore" counters
  perf/x86/intel: Add Ivy Bridge-EP uncore support
  perf/x86/intel: Fix SNB-EP CBO and PCU uncore PMU filter management
  perf/x86: Avoid kfree() in CPU_{STARTING,DYING}
  uprobes/perf: Avoid perf_trace_buf_prepare/submit if ->perf_events is empty
  uprobes/tracing: Don't pass addr=ip to perf_trace_buf_submit()
  uprobes/tracing: Change create_trace_uprobe() to support uretprobes
  uprobes/tracing: Make seq_printf() code uretprobe-friendly
  uprobes/tracing: Make register_uprobe_event() paths uretprobe-friendly
  uprobes/tracing: Make uprobe_{trace,perf}_print() uretprobe-friendly
  uprobes/tracing: Introduce is_ret_probe() and uretprobe_dispatcher()
  uprobes/tracing: Introduce uprobe_{trace,perf}_print() helpers
  uprobes/tracing: Generalize struct uprobe_trace_entry_head
  uprobes/tracing: Kill the pointless local_save_flags/preempt_count calls
  uprobes/tracing: Kill the pointless seq_print_ip_sym() call
  uprobes/tracing: Kill the pointless task_pt_regs() calls
  ...
2013-04-30 07:41:01 -07:00
Aneesh Kumar K.V 5c1f6ee9a3 powerpc: Reduce PTE table memory wastage
We allocate one page for the last level of linux page table. With THP and
large page size of 16MB, that would mean we are wasting large part
of that page. To map 16MB area, we only need a PTE space of 2K with 64K
page size. This patch reduce the space wastage by sharing the page
allocated for the last level of linux page table with multiple pmd
entries. We call these smaller chunks PTE page fragments and allocated
page, PTE page.

In order to support systems which doesn't have 64K HPTE support, we also
add another 2K to PTE page fragment. The second half of the PTE fragments
is used for storing slot and secondary bit information of an HPTE. With this
we now have a 4K PTE fragment.

We use a simple approach to share the PTE page. On allocation, we bump the
PTE page refcount to 16 and share the PTE page with the next 16 pte alloc
request. This should help in the node locality of the PTE page fragment,
assuming that the immediate pte alloc request will mostly come from the
same NUMA node. We don't try to reuse the freed PTE page fragment. Hence
we could be waisting some space.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 16:00:07 +10:00
Aneesh Kumar K.V ce54152f42 powerpc: Save DAR and DSISR in pt_regs on MCE
We were not saving DAR and DSISR on MCE. Save then and also print the values
along with exception details in xmon.

Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:59:42 +10:00
Kevin Hao 177c19237b powerpc/booke: Remove obsolete macro FINISH_EXCEPTION
This is stale and not used by anyone now.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:59:32 +10:00
Vasant Hegde fb4696c395 powerpc/rtas_flash: Fix bad memory access
We use kmem_cache_alloc() to allocate memory to hold the new firmware
which will be flashed. kmem_cache_alloc() calls rtas_block_ctor() to
set memory to NULL. But these constructor is called only for newly
allocated slabs.

If we run below command multiple time without rebooting, allocator may
allocate memory from the area which was free'd by kmem_cache_free and
it will not call constructor. In this situation we may hit kernel oops.

dd if=<fw image> of=/proc/ppc64/rtas/firmware_flash bs=4096

oops message:
-------------
[ 1602.399755] Oops: Kernel access of bad area, sig: 11 [#1]
[ 1602.399772] SMP NR_CPUS=1024 NUMA pSeries
[ 1602.399779] Modules linked in: rtas_flash nfsd lockd auth_rpcgss nfs_acl sunrpc fuse loop dm_mod sg ipv6 ses enclosure ehea ehci_pci ohci_hcd ehci_hcd usbcore sd_mod usb_common crc_t10dif scsi_dh_alua scsi_dh_emc scsi_dh_hp_sw scsi_dh_rdac scsi_dh ipr libata scsi_mod
[ 1602.399817] NIP: d00000000a170b9c LR: d00000000a170b64 CTR: c00000000079cd58
[ 1602.399823] REGS: c0000003b9937930 TRAP: 0300   Not tainted  (3.9.0-rc4-0.27-ppc64)
[ 1602.399828] MSR: 8000000000009032 <SF,EE,ME,IR,DR,RI>  CR: 22000428  XER: 20000000
[ 1602.399841] SOFTE: 1
[ 1602.399844] CFAR: c000000000005f24
[ 1602.399848] DAR: 8c2625a820631fef, DSISR: 40000000
[ 1602.399852] TASK = c0000003b4520760[3655] 'dd' THREAD: c0000003b9934000 CPU: 3
GPR00: 8c2625a820631fe7 c0000003b9937bb0 d00000000a179f28 d00000000a171f08
GPR04: 0000000010040000 0000000000001000 c0000003b9937df0 c0000003b5fb2080
GPR08: c0000003b58f7200 d00000000a179f28 c0000003b40058d4 c00000000079cd58
GPR12: d00000000a171450 c000000007f40900 0000000000000005 0000000010178d20
GPR16: 00000000100cb9d8 000000000000001d 0000000000000000 000000001003ffff
GPR20: 0000000000000001 0000000000000000 00003fffa0b50d30 000000001001f010
GPR24: 0000000010020888 0000000010040000 d00000000a171f08 d00000000a172808
GPR28: 0000000000001000 0000000010040000 c0000003b4005880 8c2625a820631fe7
[ 1602.399924] NIP [d00000000a170b9c] .rtas_flash_write+0x7c/0x1e8 [rtas_flash]
[ 1602.399930] LR [d00000000a170b64] .rtas_flash_write+0x44/0x1e8 [rtas_flash]
[ 1602.399934] Call Trace:
[ 1602.399939] [c0000003b9937bb0] [d00000000a170b64] .rtas_flash_write+0x44/0x1e8 [rtas_flash] (unreliable)
[ 1602.399948] [c0000003b9937c60] [c000000000282830] .proc_reg_write+0x90/0xe0
[ 1602.399955] [c0000003b9937ce0] [c0000000001ff374] .vfs_write+0x114/0x238
[ 1602.399961] [c0000003b9937d80] [c0000000001ff5d8] .SyS_write+0x70/0xe8
[ 1602.399968] [c0000003b9937e30] [c000000000009cdc] syscall_exit+0x0/0xa0
[ 1602.399973] Instruction dump:
[ 1602.399977] eb698010 801b0028 2f80dcd6 419e00a4 2fbc0000 419e009c ebfb0030 2fbf0000
[ 1602.399989] 409e0010 480000d8 60000000 7c1f0378 <e81f0008> 2fa00000 409efff4 e81f0000
[ 1602.400012] ---[ end trace b4136d115dc31dac ]---
[ 1602.402178]
[ 1602.402185] Sending IPI to other CPUs
[ 1602.403329] IPI complete

This patch uses kmem_cache_zalloc() instead of kmem_cache_alloc() to
allocate memory, which makes sure memory is set to 0 before using.
Also removes rtas_block_ctor(), which is no longer required.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 15:59:28 +10:00
Thomas Gleixner d0380e6c3c early_printk: consolidate random copies of identical code
The early console implementations are the same all over the place.  Move
the print function to kernel/printk and get rid of the copies.

[akpm@linux-foundation.org: arch/mips/kernel/early_printk.c needs kernel.h for va_list]
[paul.gortmaker@windriver.com: sh4: make the bios early console support depend on EARLY_PRINTK]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Richard Weinberger <richard@nod.at>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:13 -07:00