Граф коммитов

21 Коммитов

Автор SHA1 Сообщение Дата
Ming Lei cb96a42cc1 blk-mq: fix schedule from atomic context
blk_mq_put_ctx() has to be called before io_schedule() in
bt_get().

This patch fixes the problem by taking similar approach from
percpu_ida allocation for the situation.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-03 21:04:39 -06:00
Ming Lei 1aecfe4887 blk-mq: move blk_mq_get_ctx/blk_mq_put_ctx to mq private header
The blk-mq tag code need these helpers.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-03 21:04:38 -06:00
Jens Axboe 67aec14ce8 blk-mq: make the sysfs mq/ layout reflect current mappings
Currently blk-mq registers all the hardware queues in sysfs,
regardless of whether it uses them (e.g. they have CPU mappings)
or not. The unused hardware queues lack the cpux/ directories,
and the other sysfs entries (like active, pending, etc) are all
zeroes.

Change this so that sysfs correctly reflects the current mappings
of the hardware queues.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-30 08:25:36 -06:00
Jens Axboe f14bbe77a9 blk-mq: pass in suggested NUMA node to ->alloc_hctx()
Drivers currently have to figure this out on their own, and they
are missing information to do it properly. The ones that did
attempt to do it, do it wrong.

So just pass in the suggested node directly to the alloc
function.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-27 12:06:53 -06:00
Jens Axboe e814e71ba4 blk-mq: allow the hctx cpu hotplug notifier to return errors
Prepare this for the next patch which adds more smarts in the
plugging logic, so that we can save some memory.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-21 13:59:08 -06:00
Jens Axboe e3a2b3f931 blk-mq: allow changing of queue depth through sysfs
For request_fn based devices, the block layer exports a 'nr_requests'
file through sysfs to allow adjusting of queue depth on the fly.
Currently this returns -EINVAL for blk-mq, since it's not wired up.
Wire this up for blk-mq, so that it now also always dynamic
adjustments of the allowed queue depth for any given block device
managed by blk-mq.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-20 11:49:02 -06:00
Jens Axboe e93ecf602b blk-mq: move the cache friendly bitmap type of out blk-mq-tag
We will use it for the pending list in blk-mq core as well.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-19 11:02:47 -06:00
Jens Axboe 4bb659b156 blk-mq: implement new and more efficient tagging scheme
blk-mq currently uses percpu_ida for tag allocation. But that only
works well if the ratio between tag space and number of CPUs is
sufficiently high. For most devices and systems, that is not the
case. The end result if that we either only utilize the tag space
partially, or we end up attempting to fully exhaust it and run
into lots of lock contention with stealing between CPUs. This is
not optimal.

This new tagging scheme is a hybrid bitmap allocator. It uses
two tricks to both be SMP friendly and allow full exhaustion
of the space:

1) We cache the last allocated (or freed) tag on a per blk-mq
   software context basis. This allows us to limit the space
   we have to search. The key element here is not caching it
   in the shared tag structure, otherwise we end up dirtying
   more shared cache lines on each allocate/free operation.

2) The tag space is split into cache line sized groups, and
   each context will start off randomly in that space. Even up
   to full utilization of the space, this divides the tag users
   efficiently into cache line groups, avoiding dirtying the same
   one both between allocators and between allocator and freeer.

This scheme shows drastically better behaviour, both on small
tag spaces but on large ones as well. It has been tested extensively
to show better performance for all the cases blk-mq cares about.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-05-09 09:36:49 -06:00
Christoph Hellwig 3853520163 blk-mq: respect rq_affinity
The blk-mq code is using it's own version of the I/O completion affinity
tunables, which causes a few issues:

 - the rq_affinity sysfs file doesn't work for blk-mq devices, even if it
   still is present, thus breaking existing tuning setups.
 - the rq_affinity = 1 mode, which is the defauly for legacy request based
   drivers isn't implemented at all.
 - blk-mq drivers don't implement any completion affinity with the default
   flag settings.

This patches removes the blk-mq ipi_redirect flag and sysfs file, as well
as the internal BLK_MQ_F_SHOULD_IPI flag and replaces it with code that
respects the queue-wide rq_affinity flags and also implements the
rq_affinity = 1 mode.

This means I/O completion affinity can now only be tuned block-queue wide
instead of per context, which seems more sensible to me anyway.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-25 08:24:07 -06:00
Jens Axboe 87ee7b1121 blk-mq: fix race with timeouts and requeue events
If a requeue event races with a timeout, we can get into the
situation where we attempt to complete a request from the
timeout handler when it's not start anymore. This causes a crash.
So have the timeout handler check that REQ_ATOM_STARTED is still
set on the request - if not, we ignore the event. If this happens,
the request has now been marked as complete. As a consequence, we
need to ensure to clear REQ_ATOM_COMPLETE in blk_mq_start_request(),
as to maintain proper request state.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-24 08:51:47 -06:00
Christoph Hellwig 24d2f90309 blk-mq: split out tag initialization, support shared tags
Add a new blk_mq_tag_set structure that gets set up before we initialize
the queue.  A single blk_mq_tag_set structure can be shared by multiple
queues.

Signed-off-by: Christoph Hellwig <hch@lst.de>

Modular export of blk_mq_{alloc,free}_tagset added by me.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15 14:18:02 -06:00
Christoph Hellwig 8727af4b9d blk-mq: make ->flush_rq fully transparent to drivers
Drivers shouldn't have to care about the block layer setting aside a
request to implement the flush state machine.  We already override the
mq context and tag to make it more transparent, but so far haven't deal
with the driver private data in the request.  Make sure to override this
as well, and while we're at it add a proper helper sitting in blk-mq.c
that implements the full impersonation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15 14:03:02 -06:00
Christoph Hellwig 9d74e25737 blk-mq: do not initialize req->special
Drivers can reach their private data easily using the blk_mq_rq_to_pdu
helper and don't need req->special.  By not initializing it code can
be simplified nicely, and we also shave off a few more instructions from
the I/O path.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15 14:03:02 -06:00
Christoph Hellwig eeabc850b7 blk-mq: merge blk_mq_insert_request and blk_mq_run_request
It's almost identical to blk_mq_insert_request, so fold the two into one
slightly more generic function by making the flush special case a bit
smarted.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-03-21 08:57:37 -06:00
Jens Axboe 676141e48a blk-mq: don't dump CPU -> hw queue map on driver load
Now that we are out of initial debug/bringup mode, remove
the verbose dump of the mapping table.

Provide the mapping table in sysfs, under the hardware queue
directory, in the cpu_list file.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-03-20 13:31:44 -06:00
Christoph Hellwig 18741986a4 blk-mq: rework flush sequencing logic
Witch to using a preallocated flush_rq for blk-mq similar to what's done
with the old request path.  This allows us to set up the request properly
with a tag from the actually allowed range and ->rq_disk as needed by
some drivers.  To make life easier we also switch to dynamic allocation
of ->flush_rq for the old path.

This effectively reverts most of

    "blk-mq: fix for flush deadlock"

and

    "blk-mq: Don't reserve a tag for flush request"

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-10 09:29:00 -07:00
Christoph Hellwig 30a91cb4ef blk-mq: rework I/O completions
Rework I/O completions to work more like the old code path.  blk_mq_end_io
now stays out of the business of deferring completions to others CPUs
and calling blk_mark_rq_complete.  The latter is very important to allow
completing requests that have timed out and thus are already marked completed,
the former allows using the IPI callout even for driver specific completions
instead of having to reimplement them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-10 09:27:31 -07:00
Christoph Hellwig 3d6efbf62c blk-mq: use __smp_call_function_single directly
__smp_call_function_single already avoids multiple IPIs by internally
queing up the items, and now also is available for non-SMP builds as
a trivially correct stub, so there is no need to wrap it.  If the
additional lock roundtrip cause problems my patch to convert the
generic IPI code to llists is waiting to get merged will fix it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2014-01-08 14:31:27 -07:00
Ming Lei 3edcc0ce85 block: blk-mq: don't export blk_mq_free_queue()
blk_mq_free_queue() is called from release handler of
queue kobject, so it needn't be called from drivers.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-12-31 09:53:05 -07:00
Ming Lei 43a5e4e219 block: blk-mq: support draining mq queue
blk_mq_drain_queue() is introduced so that we can drain
mq queue inside blk_cleanup_queue().

Also don't accept new requests any more if queue is marked
as dying.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-12-31 09:53:05 -07:00
Jens Axboe 320ae51fee blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:

- The classic request_fn based approach, where drivers use struct
  request units for IO. The block layer provides various helper
  functionalities to let drivers share code, things like tag
  management, timeout handling, queueing, etc.

- The "stacked" approach, where a driver squeezes in between the
  block layer and IO submitter. Since this bypasses the IO stack,
  driver generally have to manage everything themselves.

With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.

The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.

This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.

blk-mq provides various helper functions, which include:

- Scalable support for request tagging. Most devices need to
  be able to uniquely identify a request both in the driver and
  to the hardware. The tagging uses per-cpu caches for freed
  tags, to enable cache hot reuse.

- Timeout handling without tracking request on a per-device
  basis. Basically the driver should be able to get a notification,
  if a request happens to fail.

- Optional support for non 1:1 mappings between issue and
  submission queues. blk-mq can redirect IO completions to the
  desired location.

- Support for per-request payloads. Drivers almost always need
  to associate a request structure with some driver private
  command structure. Drivers can tell blk-mq this at init time,
  and then any request handed to the driver will have the
  required size of memory associated with it.

- Support for merging of IO, and plugging. The stacked model
  gets neither of these. Even for high IOPS devices, merging
  sequential IO reduces per-command overhead and thus
  increases bandwidth.

For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).

Contributions in this patch from the following people:

Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>

Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-25 11:56:00 +01:00