Граф коммитов

23 Коммитов

Автор SHA1 Сообщение Дата
Adrian Bunk f751d50f6d [PATCH] show MCP menu only on ARCH_SA1100
On architectures like i386, the "Multimedia Capabilities Port drivers" menu is
visible, but it can't be visited since it contains nothing usable for
!ARCH_SA1100.

This patch therefore shows this menu only on ARCH_SA1100.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:28 -08:00
Russell King 413b486e18 [PATCH] Add MCP bus_type probe and remove methods
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 11:26:08 -08:00
Arjan van de Ven a621aaed69 [MMC+MFD] Convert mmc to mutexes
convert mfd and mmc to mutexes

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-12 18:43:35 +00:00
Nicolas Kaiser 44fce35f29 [PATCH] drivers/mfd: header included twice
linux/delay.h included twice

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:59 -08:00
Russell King 9ded96f24c [PATCH] IRQ type flags
Some ARM platforms have the ability to program the interrupt controller to
detect various interrupt edges and/or levels.  For some platforms, this is
critical to setup correctly, particularly those which the setting is dependent
on the device.

Currently, ARM drivers do (eg) the following:

	err = request_irq(irq, ...);

	set_irq_type(irq, IRQT_RISING);

However, if the interrupt has previously been programmed to be level sensitive
(for whatever reason) then this will cause an interrupt storm.

Hence, if we combine set_irq_type() with request_irq(), we can then safely set
the type prior to unmasking the interrupt.  The unfortunate problem is that in
order to support this, these flags need to be visible outside of the ARM
architecture - drivers such as smc91x need these flags and they're
cross-architecture.

Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the
property that the device would like.  The IRQ controller code should do its
best to select the most appropriate supported mode.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:46 -08:00
Nicolas Pitre 1393c3edc3 [PATCH] input: fix ucb1x00-ts breakage after conversion to dynamic input_dev allocation
The bd62266319 commit broke the UCB1x00
touchscreen driver since the idev structure was assumed to be into the ts
structure, simply casting the former to the later in a couple places.

This patch fixes those, and also cache the idev pointer between multiple
calls to input_report_abs() to avoid growing the compiled code needlessly.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:45 -08:00
Russell King 3ae5eaec1d [DRIVER MODEL] Convert platform drivers to use struct platform_driver
This allows us to eliminate the casts in the drivers, and eventually
remove the use of the device_driver function pointer methods for
platform device drivers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-09 22:32:44 +00:00
Tim Schmielau 8c65b4a604 [PATCH] fix remaining missing includes
Fix more include file problems that surfaced since I submitted the previous
fix-missing-includes.patch.  This should now allow not to include sched.h
from module.h, which is done by a followup patch.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:41 -08:00
Linus Torvalds 4fd5f8267d Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31 07:32:56 -08:00
Pavel Machek 1753298947 [ARM] Sharp sl-5500 touchscreen support
This adds support for sharp zaurus sl-5500 touchscreen.  It introduces
some not-too-nice ifs, but I guess copying whole ucb1x00-ts.c would be
bad idea...

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30 23:38:01 +00:00
Russell King d052d1beff Create platform_device.h to contain all the platform device details.
Convert everyone who uses platform_bus_type to include
linux/platform_device.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29 19:07:23 +01:00
Russell King 9480e307cd [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks
In PM v1, all devices were called at SUSPEND_DISABLE level.  Then
all devices were called at SUSPEND_SAVE_STATE level, and finally
SUSPEND_POWER_DOWN level.  However, with PM v2, to maintain
compatibility for platform devices, I arranged for the PM v2
suspend/resume callbacks to call the old PM v1 suspend/resume
callbacks three times with each level in order so that existing
drivers continued to work.

Since this is obsolete infrastructure which is no longer necessary,
we can remove it.  Here's an (untested) patch to do exactly that.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:56 -07:00
Dmitry Torokhov bd62266319 [PATCH] Input: convert ucb1x00-ts to dynamic input_dev allocation
Input: convert ucb1x00-ts to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00
Nicolas Pitre 585f54575d [ARM] 2956/1: fix the "Fix gcc4 build errors in ucb1x00-core.c"
Patch from Nicolas Pitre

drivers/mfd/ucb1x00-core.c: In function 'ucb1x00_probe':
drivers/mfd/ucb1x00-core.c:482: error: 'ucb1x00_class' undeclared (first use in this function)

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10 18:22:17 +01:00
Russell King a448a28589 [MFD] Fix gcc4 build errors in ucb1x00-core.c
drivers/mfd/ucb1x00-core.c:555: error: static declaration of 'ucb1x00_class' follows non-static declaration
drivers/mfd/ucb1x00.h:109: error: previous declaration of 'ucb1x00_class' was here

Since ucb1x00_class isn't used by anything, remove the extern
declaration and the symbol export.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-06 13:09:42 +01:00
Russell King 6b9ea4213e [MFD] Fix "bious one-bit signed bitfield" errors
ucb1x00-ts declared a couple of one-bit 'int' bitfields.
Make them unsigned.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-24 10:24:37 +01:00
Pavel Machek 5437775e0b [MFD] Cleanups suggested by Dmitri, Vojtech and lists.
These are small ucb1x00-ts cleanups, as suggested by Vojtech, Dmitri
and the lists.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11 10:28:00 +01:00
Russell King 48c92022ad [MFD] Add code UCB1200/UCB1300 assabet platform support
Add support for Intel assabet specific board support for
UCB1200/UCB1300 devices.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11 10:27:23 +01:00
Russell King acb45439a8 [MFD] Add code UCB1200/UCB1300 touchscreen support
Add support for Philips UCB1200 and UCB1300 touchscreen
interfaces found on ARM devices.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11 10:26:57 +01:00
Russell King 05c45ca9aa [MFD] Add code UCB1200/UCB1300 device support
Add the core device support code for the Philips UCB1200 and
UCB1300 devices.  Also includes the following from Pavel:

This fixes u32 vs. pm_message_t confusion and uses cleaner
try_to_freeze() [fixing compilation as a side-effect on newer
kernels.]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11 10:26:31 +01:00
Russell King 323cdfc191 [MFD] Add SA11x0 MCP platform device support
Add platform device data for the SA11x0 MCP device.  This allows
platforms to customise the configuration of the SA11x0 MCP device
according to their needs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18 10:10:46 +01:00
Russell King 5e742ad66b [MFD] Add SA11x0 MCP support
This adds support for the MCP interface found on SA11x0 devices.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18 10:08:15 +01:00
Russell King a4e137ab14 [MFD] Add multimedia communication port core support
Add support for the core of the multimedia communication port
framework.  This is a port used to communicate with devices
with two DMA paths and a control path.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18 10:06:59 +01:00