Граф коммитов

2683 Коммитов

Автор SHA1 Сообщение Дата
Bob Peterson 260595b439 Reinstate "GFS2: free disk inode which is deleted by remote node -V2"
It turns out that reverting commit 970343cd49 ("GFS2: free disk inode
which is deleted by remote node -V2") causes a regression related to
evicting inodes that were unlinked on a different cluster node.

We could also have simply added a call to d_mark_dontcache() to function
gfs2_try_evict(), but the original pre-revert code is better tested and
proven.

This reverts commit 445cb1277e.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-03-23 19:37:56 +01:00
Linus Torvalds a93e884edf Driver core changes for 6.3-rc1
Here is the large set of driver core changes for 6.3-rc1.
 
 There's a lot of changes this development cycle, most of the work falls
 into two different categories:
   - fw_devlink fixes and updates.  This has gone through numerous review
     cycles and lots of review and testing by lots of different devices.
     Hopefully all should be good now, and Saravana will be keeping a
     watch for any potential regression on odd embedded systems.
   - driver core changes to work to make struct bus_type able to be moved
     into read-only memory (i.e. const)  The recent work with Rust has
     pointed out a number of areas in the driver core where we are
     passing around and working with structures that really do not have
     to be dynamic at all, and they should be able to be read-only making
     things safer overall.  This is the contuation of that work (started
     last release with kobject changes) in moving struct bus_type to be
     constant.  We didn't quite make it for this release, but the
     remaining patches will be finished up for the release after this
     one, but the groundwork has been laid for this effort.
 
 Other than that we have in here:
   - debugfs memory leak fixes in some subsystems
   - error path cleanups and fixes for some never-able-to-be-hit
     codepaths.
   - cacheinfo rework and fixes
   - Other tiny fixes, full details are in the shortlog
 
 All of these have been in linux-next for a while with no reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
 6oeFOjD3JDju3cQsfGgd
 =Su6W
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the large set of driver core changes for 6.3-rc1.

  There's a lot of changes this development cycle, most of the work
  falls into two different categories:

   - fw_devlink fixes and updates. This has gone through numerous review
     cycles and lots of review and testing by lots of different devices.
     Hopefully all should be good now, and Saravana will be keeping a
     watch for any potential regression on odd embedded systems.

   - driver core changes to work to make struct bus_type able to be
     moved into read-only memory (i.e. const) The recent work with Rust
     has pointed out a number of areas in the driver core where we are
     passing around and working with structures that really do not have
     to be dynamic at all, and they should be able to be read-only
     making things safer overall. This is the contuation of that work
     (started last release with kobject changes) in moving struct
     bus_type to be constant. We didn't quite make it for this release,
     but the remaining patches will be finished up for the release after
     this one, but the groundwork has been laid for this effort.

  Other than that we have in here:

   - debugfs memory leak fixes in some subsystems

   - error path cleanups and fixes for some never-able-to-be-hit
     codepaths.

   - cacheinfo rework and fixes

   - Other tiny fixes, full details are in the shortlog

  All of these have been in linux-next for a while with no reported
  problems"

[ Geert Uytterhoeven points out that that last sentence isn't true, and
  that there's a pending report that has a fix that is queued up - Linus ]

* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
  debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
  OPP: fix error checking in opp_migrate_dentry()
  debugfs: update comment of debugfs_rename()
  i3c: fix device.h kernel-doc warnings
  dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
  driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
  Revert "driver core: add error handling for devtmpfs_create_node()"
  Revert "devtmpfs: add debug info to handle()"
  Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
  driver core: cpu: don't hand-override the uevent bus_type callback.
  devtmpfs: remove return value of devtmpfs_delete_node()
  devtmpfs: add debug info to handle()
  driver core: add error handling for devtmpfs_create_node()
  driver core: bus: update my copyright notice
  driver core: bus: add bus_get_dev_root() function
  driver core: bus: constify bus_unregister()
  driver core: bus: constify some internal functions
  driver core: bus: constify bus_get_kset()
  driver core: bus: constify bus_register/unregister_notifier()
  driver core: remove private pointer from struct bus_type
  ...
2023-02-24 12:58:55 -08:00
Linus Torvalds 3822a7c409 - Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
   memfd creation time, with the option of sealing the state of the X bit.
 
 - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
   thread-safe for pmd unshare") which addresses a rare race condition
   related to PMD unsharing.
 
 - Several folioification patch serieses from Matthew Wilcox, Vishal
   Moola, Sidhartha Kumar and Lorenzo Stoakes
 
 - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
   does perform some memcg maintenance and cleanup work.
 
 - SeongJae Park has added DAMOS filtering to DAMON, with the series
   "mm/damon/core: implement damos filter".  These filters provide users
   with finer-grained control over DAMOS's actions.  SeongJae has also done
   some DAMON cleanup work.
 
 - Kairui Song adds a series ("Clean up and fixes for swap").
 
 - Vernon Yang contributed the series "Clean up and refinement for maple
   tree".
 
 - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series.  It
   adds to MGLRU an LRU of memcgs, to improve the scalability of global
   reclaim.
 
 - David Hildenbrand has added some userfaultfd cleanup work in the
   series "mm: uffd-wp + change_protection() cleanups".
 
 - Christoph Hellwig has removed the generic_writepages() library
   function in the series "remove generic_writepages".
 
 - Baolin Wang has performed some maintenance on the compaction code in
   his series "Some small improvements for compaction".
 
 - Sidhartha Kumar is doing some maintenance work on struct page in his
   series "Get rid of tail page fields".
 
 - David Hildenbrand contributed some cleanup, bugfixing and
   generalization of pte management and of pte debugging in his series "mm:
   support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
   PTEs".
 
 - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
   flag in the series "Discard __GFP_ATOMIC".
 
 - Sergey Senozhatsky has improved zsmalloc's memory utilization with his
   series "zsmalloc: make zspage chain size configurable".
 
 - Joey Gouly has added prctl() support for prohibiting the creation of
   writeable+executable mappings.  The previous BPF-based approach had
   shortcomings.  See "mm: In-kernel support for memory-deny-write-execute
   (MDWE)".
 
 - Waiman Long did some kmemleak cleanup and bugfixing in the series
   "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
 
 - T.J.  Alumbaugh has contributed some MGLRU cleanup work in his series
   "mm: multi-gen LRU: improve".
 
 - Jiaqi Yan has provided some enhancements to our memory error
   statistics reporting, mainly by presenting the statistics on a per-node
   basis.  See the series "Introduce per NUMA node memory error
   statistics".
 
 - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
   regression in compaction via his series "Fix excessive CPU usage during
   compaction".
 
 - Christoph Hellwig does some vmalloc maintenance work in the series
   "cleanup vfree and vunmap".
 
 - Christoph Hellwig has removed block_device_operations.rw_page() in ths
   series "remove ->rw_page".
 
 - We get some maple_tree improvements and cleanups in Liam Howlett's
   series "VMA tree type safety and remove __vma_adjust()".
 
 - Suren Baghdasaryan has done some work on the maintainability of our
   vm_flags handling in the series "introduce vm_flags modifier functions".
 
 - Some pagemap cleanup and generalization work in Mike Rapoport's series
   "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
   "fixups for generic implementation of pfn_valid()"
 
 - Baoquan He has done some work to make /proc/vmallocinfo and
   /proc/kcore better represent the real state of things in his series
   "mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
 
 - Jason Gunthorpe rationalized the GUP system's interface to the rest of
   the kernel in the series "Simplify the external interface for GUP".
 
 - SeongJae Park wishes to migrate people from DAMON's debugfs interface
   over to its sysfs interface.  To support this, we'll temporarily be
   printing warnings when people use the debugfs interface.  See the series
   "mm/damon: deprecate DAMON debugfs interface".
 
 - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
   and clean-ups" series.
 
 - Huang Ying has provided a dramatic reduction in migration's TLB flush
   IPI rates with the series "migrate_pages(): batch TLB flushing".
 
 - Arnd Bergmann has some objtool fixups in "objtool warning fixes".
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
 jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
 DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
 =MlGs
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Daniel Verkamp has contributed a memfd series ("mm/memfd: add
   F_SEAL_EXEC") which permits the setting of the memfd execute bit at
   memfd creation time, with the option of sealing the state of the X
   bit.

 - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
   thread-safe for pmd unshare") which addresses a rare race condition
   related to PMD unsharing.

 - Several folioification patch serieses from Matthew Wilcox, Vishal
   Moola, Sidhartha Kumar and Lorenzo Stoakes

 - Johannes Weiner has a series ("mm: push down lock_page_memcg()")
   which does perform some memcg maintenance and cleanup work.

 - SeongJae Park has added DAMOS filtering to DAMON, with the series
   "mm/damon/core: implement damos filter".

   These filters provide users with finer-grained control over DAMOS's
   actions. SeongJae has also done some DAMON cleanup work.

 - Kairui Song adds a series ("Clean up and fixes for swap").

 - Vernon Yang contributed the series "Clean up and refinement for maple
   tree".

 - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
   adds to MGLRU an LRU of memcgs, to improve the scalability of global
   reclaim.

 - David Hildenbrand has added some userfaultfd cleanup work in the
   series "mm: uffd-wp + change_protection() cleanups".

 - Christoph Hellwig has removed the generic_writepages() library
   function in the series "remove generic_writepages".

 - Baolin Wang has performed some maintenance on the compaction code in
   his series "Some small improvements for compaction".

 - Sidhartha Kumar is doing some maintenance work on struct page in his
   series "Get rid of tail page fields".

 - David Hildenbrand contributed some cleanup, bugfixing and
   generalization of pte management and of pte debugging in his series
   "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
   swap PTEs".

 - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
   flag in the series "Discard __GFP_ATOMIC".

 - Sergey Senozhatsky has improved zsmalloc's memory utilization with
   his series "zsmalloc: make zspage chain size configurable".

 - Joey Gouly has added prctl() support for prohibiting the creation of
   writeable+executable mappings.

   The previous BPF-based approach had shortcomings. See "mm: In-kernel
   support for memory-deny-write-execute (MDWE)".

 - Waiman Long did some kmemleak cleanup and bugfixing in the series
   "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".

 - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
   "mm: multi-gen LRU: improve".

 - Jiaqi Yan has provided some enhancements to our memory error
   statistics reporting, mainly by presenting the statistics on a
   per-node basis. See the series "Introduce per NUMA node memory error
   statistics".

 - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
   regression in compaction via his series "Fix excessive CPU usage
   during compaction".

 - Christoph Hellwig does some vmalloc maintenance work in the series
   "cleanup vfree and vunmap".

 - Christoph Hellwig has removed block_device_operations.rw_page() in
   ths series "remove ->rw_page".

 - We get some maple_tree improvements and cleanups in Liam Howlett's
   series "VMA tree type safety and remove __vma_adjust()".

 - Suren Baghdasaryan has done some work on the maintainability of our
   vm_flags handling in the series "introduce vm_flags modifier
   functions".

 - Some pagemap cleanup and generalization work in Mike Rapoport's
   series "mm, arch: add generic implementation of pfn_valid() for
   FLATMEM" and "fixups for generic implementation of pfn_valid()"

 - Baoquan He has done some work to make /proc/vmallocinfo and
   /proc/kcore better represent the real state of things in his series
   "mm/vmalloc.c: allow vread() to read out vm_map_ram areas".

 - Jason Gunthorpe rationalized the GUP system's interface to the rest
   of the kernel in the series "Simplify the external interface for
   GUP".

 - SeongJae Park wishes to migrate people from DAMON's debugfs interface
   over to its sysfs interface. To support this, we'll temporarily be
   printing warnings when people use the debugfs interface. See the
   series "mm/damon: deprecate DAMON debugfs interface".

 - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
   and clean-ups" series.

 - Huang Ying has provided a dramatic reduction in migration's TLB flush
   IPI rates with the series "migrate_pages(): batch TLB flushing".

 - Arnd Bergmann has some objtool fixups in "objtool warning fixes".

* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
  include/linux/migrate.h: remove unneeded externs
  mm/memory_hotplug: cleanup return value handing in do_migrate_range()
  mm/uffd: fix comment in handling pte markers
  mm: change to return bool for isolate_movable_page()
  mm: hugetlb: change to return bool for isolate_hugetlb()
  mm: change to return bool for isolate_lru_page()
  mm: change to return bool for folio_isolate_lru()
  objtool: add UACCESS exceptions for __tsan_volatile_read/write
  kmsan: disable ftrace in kmsan core code
  kasan: mark addr_has_metadata __always_inline
  mm: memcontrol: rename memcg_kmem_enabled()
  sh: initialize max_mapnr
  m68k/nommu: add missing definition of ARCH_PFN_OFFSET
  mm: percpu: fix incorrect size in pcpu_obj_full_size()
  maple_tree: reduce stack usage with gcc-9 and earlier
  mm: page_alloc: call panic() when memoryless node allocation fails
  mm: multi-gen LRU: avoid futile retries
  migrate_pages: move THP/hugetlb migration support check to simplify code
  migrate_pages: batch flushing TLB
  migrate_pages: share more code between _unmap and _move
  ...
2023-02-23 17:09:35 -08:00
Linus Torvalds b7ee881282 gfs2 fixes
- Fix a race when disassociating inodes from their glocks after
   iget_failed().
 
 - On filesystems with a block size smaller than the page size, make
   sure that ->writepages() writes out all buffers of journaled inodes.
 
 - Various improvements to the way the delete workqueue is drained to
   speed up unmount and prevent leftover inodes.  At unmount time, evict
   deleted inodes cooperatively across the cluster to avoid unnecessary
   timeouts.
 
 - Various minor cleanups and fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEJZs3krPW0xkhLMTc1b+f6wMTZToFAmP2ASMUHGFncnVlbmJh
 QHJlZGhhdC5jb20ACgkQ1b+f6wMTZTodnQ//XSt/sKo6W4y56Pxz5AHO2cTdypLk
 b+ki1uWfguBm/3o8nFtXedoCcTsWZ8EICPL9bZKFBwSLSRChZuc6kKDz07wwseKR
 t8Lbi9G8tSwyDeQaiGTBd1UBWFAjNGqXniyqx/ki+RZZ3QMVJnwcb1Bjtl9DJ5DE
 lAXcvz0DZSQQwtpsdG+qpme65XZSziS0uDgkaz5Pio/1NDfbZ/U28HBMLNkS/Ef7
 RnF05PRaM07OGn2rXmvIqwIwoxjH2eF38x5EyMI3xpr//b3x/mVbwL+QFECfgf7r
 iuISCtL46n/gs4NmroPfT5LbCDhkOw513mmkdJNKXwHsz4s8hS+BuZVtTa8b02hn
 0K5Ova63qz3TIoZ+P6n44xiRFEVjqz0eqn0XhOr+HRljRXhn2ihxQLl4yGNgrmB2
 KTC+xMqZHXs2J3H97OTZDJVHYe5k6HqzvBUN6BnGRZ1lSEJbt5Fe0b7Web2aaLY2
 X2jFXplWVisTPKcusSuG3kP4WrEJq7ic8YLX6BgKU5DBbS69NETssUuMGUIxsd6k
 P+A4wfrUWac+X+DHFRPJu1yNL2UsW237AX75sNNOqLNRX04ZjXGFxymnEw//t2Qr
 2sPOEkU4O61o7tYWlK8PXTDVEbteZO3pBCdj7ARsmDEY401QuT9ZlmpmhDxxP/hP
 TGLDXXMbG+eireU=
 =3v/p
 -----END PGP SIGNATURE-----

Merge tag 'gfs2-v6.2-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 updates from Andreas Gruenbacher:

 - Fix a race when disassociating inodes from their glocks after
   iget_failed()

 - On filesystems with a block size smaller than the page size, make
   sure that ->writepages() writes out all buffers of journaled inodes

 - Various improvements to the way the delete workqueue is drained to
   speed up unmount and prevent leftover inodes. At unmount time, evict
   deleted inodes cooperatively across the cluster to avoid unnecessary
   timeouts

 - Various minor cleanups and fixes

* tag 'gfs2-v6.2-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Convert gfs2_page_add_databufs to folios
  gfs2: jdata writepage fix
  gfs2: Improve gfs2_make_fs_rw error handling
  Revert "GFS2: free disk inode which is deleted by remote node -V2"
  gfs2: Evict inodes cooperatively
  gfs2: Flush delete work before shrinking inode cache
  gfs2: Cease delete work during unmount
  gfs2: Add SDF_DEACTIVATING super block flag
  gfs2: check gl_object in rgrp glops
  gfs2: Split the two kinds of glock "delete" work
  gfs2: Move delete workqueue into super block
  gfs2: Get rid of GLF_PENDING_DELETE flag
  gfs2: Make glock lru list scanning safer
  gfs2: Clean up gfs2_scan_glock_lru
  gfs2: Improve gfs2_upgrade_iopen_glock comment
  gfs2: gl_object races fix
2023-02-22 14:00:53 -08:00
Linus Torvalds d151e8bea1 New code for 6.3:
- Change when the iomap page_done function is called so that we still
    have a locked folio in the success case.  This fixes a writeback race
    in gfs2.
  - Change when the iomap page_prepare function is called so that gfs2
    can recover from OOM scenarios more gracefully.
  - Rename the iomap page_ops to folio_ops, since they operate on folios
    now.
 
 Signed-off-by: Darrick J. Wong <djwong@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCY8g/FwAKCRBKO3ySh0YR
 pi19AQDCatxkzguJGV9BY52Bf8iDxCgdL34RatKXAzkZC3Y6UQEAsNdb88rkWkNK
 qPlXgsZm9cNlFb8c7mFvA9JAL9IPxgE=
 =ubh6
 -----END PGP SIGNATURE-----

Merge tag 'iomap-6.3-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull iomap updates from Darrick Wong:
 "This is mostly rearranging things to make life easier for gfs2,
  nothing all that mindblowing for this release.

   - Change when the iomap page_done function is called so that we still
     have a locked folio in the success case. This fixes a writeback
     race in gfs2

   - Change when the iomap page_prepare function is called so that gfs2
     can recover from OOM scenarios more gracefully

   - Rename the iomap page_ops to folio_ops, since they operate on
     folios now"

* tag 'iomap-6.3-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: Rename page_ops to folio_ops
  iomap: Rename page_prepare handler to get_folio
  iomap: Add __iomap_get_folio helper
  iomap/gfs2: Get page in page_prepare handler
  iomap: Add iomap_get_folio helper
  iomap: Rename page_done handler to put_folio
  iomap/gfs2: Unlock and put folio in page_done handler
  iomap: Add __iomap_put_folio helper
2023-02-22 13:50:13 -08:00
Andreas Gruenbacher c1b0c3cfcb gfs2: Convert gfs2_page_add_databufs to folios
Convert gfs2_page_add_databufs() to folios and rename it to
gfs2_trans_add_databufs().

Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-02-22 12:06:20 +01:00
Andreas Gruenbacher cbb60951ce gfs2: jdata writepage fix
The ->writepage() and ->writepages() operations are supposed to write
entire pages.  However, on filesystems with a block size smaller than
PAGE_SIZE, __gfs2_jdata_writepage() only adds the first block to the
current transaction instead of adding the entire page.  Fix that.

Fixes: 18ec7d5c3f ("[GFS2] Make journaled data files identical to normal files on disk")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-02-22 12:06:20 +01:00
Linus Torvalds 05e6295f7b fs.idmapped.v6.3
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY+5NlQAKCRCRxhvAZXjc
 orOaAP9i2h3OJy95nO2Fpde0Bt2UT+oulKCCcGlvXJ8/+TQpyQD/ZQq47gFQ0EAz
 Br5NxeyGeecAb0lHpFz+CpLGsxMrMwQ=
 =+BG5
 -----END PGP SIGNATURE-----

Merge tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull vfs idmapping updates from Christian Brauner:

 - Last cycle we introduced the dedicated struct mnt_idmap type for
   mount idmapping and the required infrastucture in 256c8aed2b ("fs:
   introduce dedicated idmap type for mounts"). As promised in last
   cycle's pull request message this converts everything to rely on
   struct mnt_idmap.

   Currently we still pass around the plain namespace that was attached
   to a mount. This is in general pretty convenient but it makes it easy
   to conflate namespaces that are relevant on the filesystem with
   namespaces that are relevant on the mount level. Especially for
   non-vfs developers without detailed knowledge in this area this was a
   potential source for bugs.

   This finishes the conversion. Instead of passing the plain namespace
   around this updates all places that currently take a pointer to a
   mnt_userns with a pointer to struct mnt_idmap.

   Now that the conversion is done all helpers down to the really
   low-level helpers only accept a struct mnt_idmap argument instead of
   two namespace arguments.

   Conflating mount and other idmappings will now cause the compiler to
   complain loudly thus eliminating the possibility of any bugs. This
   makes it impossible for filesystem developers to mix up mount and
   filesystem idmappings as they are two distinct types and require
   distinct helpers that cannot be used interchangeably.

   Everything associated with struct mnt_idmap is moved into a single
   separate file. With that change no code can poke around in struct
   mnt_idmap. It can only be interacted with through dedicated helpers.
   That means all filesystems are and all of the vfs is completely
   oblivious to the actual implementation of idmappings.

   We are now also able to extend struct mnt_idmap as we see fit. For
   example, we can decouple it completely from namespaces for users that
   don't require or don't want to use them at all. We can also extend
   the concept of idmappings so we can cover filesystem specific
   requirements.

   In combination with the vfs{g,u}id_t work we finished in v6.2 this
   makes this feature substantially more robust and thus difficult to
   implement wrong by a given filesystem and also protects the vfs.

 - Enable idmapped mounts for tmpfs and fulfill a longstanding request.

   A long-standing request from users had been to make it possible to
   create idmapped mounts for tmpfs. For example, to share the host's
   tmpfs mount between multiple sandboxes. This is a prerequisite for
   some advanced Kubernetes cases. Systemd also has a range of use-cases
   to increase service isolation. And there are more users of this.

   However, with all of the other work going on this was way down on the
   priority list but luckily someone other than ourselves picked this
   up.

   As usual the patch is tiny as all the infrastructure work had been
   done multiple kernel releases ago. In addition to all the tests that
   we already have I requested that Rodrigo add a dedicated tmpfs
   testsuite for idmapped mounts to xfstests. It is to be included into
   xfstests during the v6.3 development cycle. This should add a slew of
   additional tests.

* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
  shmem: support idmapped mounts for tmpfs
  fs: move mnt_idmap
  fs: port vfs{g,u}id helpers to mnt_idmap
  fs: port fs{g,u}id helpers to mnt_idmap
  fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
  fs: port i_{g,u}id_{needs_}update() to mnt_idmap
  quota: port to mnt_idmap
  fs: port privilege checking helpers to mnt_idmap
  fs: port inode_owner_or_capable() to mnt_idmap
  fs: port inode_init_owner() to mnt_idmap
  fs: port acl to mnt_idmap
  fs: port xattr to mnt_idmap
  fs: port ->permission() to pass mnt_idmap
  fs: port ->fileattr_set() to pass mnt_idmap
  fs: port ->set_acl() to pass mnt_idmap
  fs: port ->get_acl() to pass mnt_idmap
  fs: port ->tmpfile() to pass mnt_idmap
  fs: port ->rename() to pass mnt_idmap
  fs: port ->mknod() to pass mnt_idmap
  fs: port ->mkdir() to pass mnt_idmap
  ...
2023-02-20 11:53:11 -08:00
Linus Torvalds 575a7e0f81 File locking changes for v6.3
-----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEES8DXskRxsqGE6vXTAA5oQRlWghUFAmPuC5kTHGpsYXl0b25A
 a2VybmVsLm9yZwAKCRAADmhBGVaCFdXpEADFN/loTtcANLPQmLmgmJLDuZr2zKrf
 aziMJRjqGMx6BLdwBgX8/XGBNwpG4tkVbI+zdRoVHkpcayMDpLq0dnrvi79a/dGU
 fBrI72ZDMd/S9lzbodObHMziLqvgFthsPm9ldVAZ2Kt400KKNE+ozcveiC3yVGy0
 n1k5BSt/78abzpqut5whVgJBooHtUMCh3XvBJPKwgOneHfAXCm+jqaXlKKpKlpZj
 s2OUyn8BLfNkTgpAZ88L5Rkf0mftjziL6C8KOMy1hvOsyiP0IkwLuQ/kO+2H0Ate
 p3tbOGvUT+n1gYpFYBDLnuWB4G8+CVPxfoO6KGhwT4OlCJpPlNCM8O+w/A/dKn4I
 858spkpYPMy91lEkcrRLRkg/MARWGTgZ3k76fp3OWNnfruWd6ekMlYKx9n6CIy34
 Aoc3Svy9KeA7oRrbRDltmw3UVmz53GcDo337ZL1J6Jph3s86dMG7AwGYvoDfKuKK
 b0oNK5db5v50scBnRHX6UWejE5fSnnHvgC7pU57u08odCVEUALB+r8f04vmkxcVJ
 Qed7lolQdFzn9ddaOXzpg5KeCe/cX3p4IPZSTHad7CPr8gswmC135DfXCr64x2hC
 5jyNzKbe/x+7B2xCweHmEk4ojt8IU3UaYxLJoQkNeVr8rEGC9gqZgkSDe7BnTpOf
 wT0ijzhy2u5RKg==
 =Zhf3
 -----END PGP SIGNATURE-----

Merge tag 'locks-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux

Pull file locking updates from Jeff Layton:
 "The main change here is that I've broken out most of the file locking
  definitions into a new header file. I also went ahead and completed
  the removal of locks_inode function"

* tag 'locks-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  fs: remove locks_inode
  filelock: move file locking definitions to separate header file
2023-02-20 11:10:38 -08:00
Vishal Moola (Oracle) 87ed37e66d gfs2: convert gfs2_write_cache_jdata() to use filemap_get_folios_tag()
Convert function to use folios throughout.  This is in preparation for the
removal of find_get_pgaes_range_tag().  This change removes 8 calls to
compound_head().

Also had to modify and rename gfs2_write_jdata_pagevec() to take in and
utilize folio_batch rather than pagevec and use folios rather than pages. 
gfs2_write_jdata_batch() now supports large folios.

Link: https://lkml.kernel.org/r/20230104211448.4804-18-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-02 22:33:17 -08:00
Andreas Gruenbacher b66f723bb5 gfs2: Improve gfs2_make_fs_rw error handling
In gfs2_make_fs_rw(), make sure to call gfs2_consist() to report an
inconsistency and mark the filesystem as withdrawn when
gfs2_find_jhead() fails.

At the end of gfs2_make_fs_rw(), when we discover that the filesystem
has been withdrawn, make sure we report an error.  This also replaces
the gfs2_withdrawn() check after gfs2_find_jhead().

Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: syzbot+f51cb4b9afbd87ec06f2@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-01-31 22:40:24 +01:00
Bob Peterson 445cb1277e Revert "GFS2: free disk inode which is deleted by remote node -V2"
This reverts commit 970343cd49 ("GFS2: free disk inode which is
deleted by remote node -V2").

The original intent behind commit 970343cd49 was to cull dentries when a
remote node requests to demote an iopen glock, which happens when the
remote node tries to delete the inode.  This is now handled by
gfs2_try_evict(), which is called via iopen_go_callback() ->
gfs2_queue_try_to_evict().

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-01-31 22:40:24 +01:00
Andreas Gruenbacher b88beb9a24 gfs2: Evict inodes cooperatively
Add a gfs2_evict_inodes() helper that evicts inodes cooperatively across
the cluster.  This avoids running into timeouts during unmount
unnecessarily.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-01-31 22:40:24 +01:00
Andreas Gruenbacher 6b388abc33 gfs2: Flush delete work before shrinking inode cache
In gfs2_kill_sb(), flush the delete work queue after setting the
SDF_DEACTIVATING flag.  This ensures that no new inodes will be
instantiated anymore, and the inode cache will be empty after the
following kill_block_super() -> generic_shutdown_super() ->
evict_inodes() call.

With that, function gfs2_make_fs_ro() now calls gfs2_flush_delete_work()
after the workqueue has been destroyed.  Skip that by checking for the
presence of the SDF_DEACTIVATING flag.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-01-31 22:40:24 +01:00
Bob Peterson 6c0246a96e gfs2: Cease delete work during unmount
Add a check to delete_work_func() so that it quits when it finds that
the filesystem is deactivating.  This speeds up the delete workqueue
draining in gfs2_kill_sb().

In addition, make sure that iopen_go_callback() won't queue any new
delete work while the filesystem is deactivating.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-01-31 22:40:24 +01:00
Bob Peterson 1c9001515e gfs2: Add SDF_DEACTIVATING super block flag
Add a new SDF_DEACTIVATING super block flag that is set when the
filesystem has started to deactivate. This will be used in the next
patch to stop and drain the delete work during unmount.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-01-31 22:40:24 +01:00
Bob Peterson fd5f446f0b gfs2: check gl_object in rgrp glops
Function gfs2_clear_rgrpd() is called during unmount to free all rgrps
and their sub-objects. If the rgrp glock is held (e.g. in SH) it calls
gfs2_glock_cb() to unlock, then calls flush_delayed_work() to make
sure any glock work is finished. However, there is a race with other
cluster nodes who may request the rgrp glock in another mode (say, EX).

Func gfs2_clear_rgrpd() calls glock_clear_object() which sets gl_object
to NULL but that's done without holding the gl_lockref spin_lock.
While the lock is not held Another node's demote request can cause the
state machine to run again, and since the gl_lockref is released in
do_xmote, the second process's call to do_xmote can call go_inval
(rgrp_go_inval) after the gl_object has been cleared, which results in
NULL pointer reference of the rgrp glock's gl_object.

Other go_inval glops functions don't require the gl_object to exist, as
evidenced by function inode_go_inval() which explicitly checks for if
(ip) before referencing gl_object. This patch does the same thing
for rgrp glocks. Both the go_inval and go_sync ops are patched to check
the existence of gl_object (rgd) before trying to dereference it.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-01-31 22:40:24 +01:00
Andreas Gruenbacher f0e56edc2e gfs2: Split the two kinds of glock "delete" work
Function delete_work_func() is used for two purposes:

 * to immediately try to evict the glock's inode, and

 * to verify after a little while that the inode has been deleted as
   expected, and didn't just get skipped.

These two operations are not separated very well, so introduce two new
glock flags to improved that.  Split gfs2_queue_delete_work() into
gfs2_queue_try_to_evict and gfs2_queue_verify_evict().

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-01-31 22:40:24 +01:00
Andreas Gruenbacher 0247f4e959 gfs2: Move delete workqueue into super block
Move the global delete workqueue into struct gfs2_sbd so that we can
flush / drain it without interfering with other filesystems.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-01-31 22:40:24 +01:00
Andreas Gruenbacher 3056dc4655 gfs2: Get rid of GLF_PENDING_DELETE flag
Get rid of the GLF_PENDING_DELETE glock flag introduced by commit
a0e3cc65fa ("gfs2: Turn gl_delete into a delayed work").  The only use
of that flag is to prevent the iopen glock from being demoted (i.e.,
unlocked) while delete work is pending.  It turns out that demoting the
iopen glock while delete work is pending is perfectly fine; we only need
to make sure that the glock isn't being freed while still in use.  This
is ensured by the previous patch because delete_work_func() owns a
reference while the work is queued or running.

With these changes, gfs2_queue_delete_work() no longer takes the glock
spin lock, so we can use it in iopen_go_callback() instead of
open-coding it there.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-01-31 22:40:24 +01:00
Andreas Gruenbacher 228804a35c gfs2: Make glock lru list scanning safer
In __gfs2_glock_put(), remove the glock from the lru list *after*
dropping the glock lock.  This prevents deadlocks against
gfs2_scan_glock_lru().

In gfs2_scan_glock_lru(), make sure that the glock's reference count is
zero before moving the glock to the dispose list.  This skips glocks
that are marked dead as well as glocks that are still in use.
Additionally, switch to spin_trylock() as we already do in
gfs2_dispose_glock_lru(); this alone would also be enough to prevent
deadlocks against __gfs2_glock_put().

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-01-31 22:40:24 +01:00
Andreas Gruenbacher 8fb8f70ec7 gfs2: Clean up gfs2_scan_glock_lru
Switch to list_for_each_entry_safe() and eliminate the "skipped" list in
gfs2_scan_glock_lru().

At the same time, scan the requested number of items to scan, not one
more than that number.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-01-31 22:40:24 +01:00
Andreas Gruenbacher 2d1439557f gfs2: Improve gfs2_upgrade_iopen_glock comment
Improve the comment describing the inode and iopen glock interactions
and the glock poking related to inode evict.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-01-31 22:40:18 +01:00
Andreas Gruenbacher 9ffa18884c gfs2: gl_object races fix
Function glock_clear_object() checks if the specified glock is still
pointing at the right object and clears the gl_object pointer.  To
handle the case of incompletely constructed inodes, glock_clear_object()
also allows gl_object to be NULL.

However, in the teardown case, when iget_failed() is called and the
inode is removed from the inode hash, by the time we get to the
glock_clear_object() calls in gfs2_put_super() and its helpers, we don't
have exclusion against concurrent gfs2_inode_lookup() and
gfs2_create_inode() calls, and the inode and iopen glocks may already be
pointing at another inode, so the checks in glock_clear_object() are
incorrect.

To better handle this case, always completely disassociate an inode from
its glocks before tearing it down.  In addition, get rid of a duplicate
glock_clear_object() call in gfs2_evict_inode().  That way,
glock_clear_object() will only ever be called when the glock points at
the current inode, and the NULL check in glock_clear_object() can be
removed.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2023-01-27 15:55:48 +01:00
Greg Kroah-Hartman 56d5f362ad kobject: kset_uevent_ops: make uevent() callback take a const *
The uevent() callback in struct kset_uevent_ops does not modify the
kobject passed into it, so make the pointer const to enforce this
restriction.  When doing so, fix up all existing uevent() callbacks to
have the correct signature to preserve the build.

Cc: Christine Caulfield <ccaulfie@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-17-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-27 13:45:53 +01:00
Andreas Gruenbacher 63510d9f2f Merge branch 'iomap-for-next' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git 2023-01-24 12:51:39 +01:00
Andreas Gruenbacher 95ecbd0f16 Revert "gfs2: stop using generic_writepages in gfs2_ail1_start_one"
Commit b2b0a5e978 switched from generic_writepages() to
filemap_fdatawrite_wbc() in gfs2_ail1_start_one() on the path to
replacing ->writepage() with ->writepages() and eventually eliminating
the former.  Function gfs2_ail1_start_one() is called from
gfs2_log_flush(), our main function for flushing the filesystem log.

Unfortunately, at least as implemented today, ->writepage() and
->writepages() are entirely different operations for journaled data
inodes: while the former creates and submits transactions covering the
data to be written, the latter flushes dirty buffers out to disk.

With gfs2_ail1_start_one() now calling ->writepages(), we end up
creating filesystem transactions while we are in the course of a log
flush, which immediately deadlocks on the sdp->sd_log_flush_lock
semaphore.

Work around that by going back to how things used to work before commit
b2b0a5e978 for now; figuring out a superior solution will take time we
don't have available right now.  However ...

Since the removal of generic_writepages() is imminent, open-code it
here.  We're already inside a blk_start_plug() ...  blk_finish_plug()
section here, so skip that part of the original generic_writepages().

This reverts commit b2b0a5e978.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
2023-01-22 09:46:14 +01:00
Christian Brauner 700b794052
fs: port acl to mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:28 +01:00
Christian Brauner 39f60c1cce
fs: port xattr to mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:28 +01:00
Christian Brauner 4609e1f18e
fs: port ->permission() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:28 +01:00
Christian Brauner 8782a9aea3
fs: port ->fileattr_set() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:27 +01:00
Christian Brauner 13e83a4923
fs: port ->set_acl() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:27 +01:00
Christian Brauner e18275ae55
fs: port ->rename() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:26 +01:00
Christian Brauner 5ebb29bee8
fs: port ->mknod() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:26 +01:00
Christian Brauner c54bd91e9e
fs: port ->mkdir() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:26 +01:00
Christian Brauner 7a77db9551
fs: port ->symlink() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:25 +01:00
Christian Brauner 6c960e68aa
fs: port ->create() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:25 +01:00
Christian Brauner b74d24f7a7
fs: port ->getattr() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:25 +01:00
Christian Brauner c1632a0f11
fs: port ->setattr() to pass mnt_idmap
Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2023-01-19 09:24:02 +01:00
Matthew Wilcox (Oracle) 11551cf15e gfs2: replace obvious uses of b_page with b_folio
These places just use b_page to get to the buffer's address_space.

Link: https://lkml.kernel.org/r/20221215214402.3522366-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-18 17:12:40 -08:00
Andreas Gruenbacher 471859f57d iomap: Rename page_ops to folio_ops
The operations in struct page_ops all operate on folios, so rename
struct page_ops to struct folio_ops.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[djwong: port around not removing iomap_valid]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2023-01-18 10:44:05 -08:00
Andreas Gruenbacher c82abc2394 iomap: Rename page_prepare handler to get_folio
The ->page_prepare() handler in struct iomap_page_ops is now somewhat
misnamed, so rename it to ->get_folio().

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2023-01-18 10:44:05 -08:00
Andreas Gruenbacher 9060bc4d3a iomap/gfs2: Get page in page_prepare handler
Change the iomap ->page_prepare() handler to get and return a locked
folio instead of doing that in iomap_write_begin().  This allows to
recover from out-of-memory situations in ->page_prepare(), which
eliminates the corresponding error handling code in iomap_write_begin().
The ->put_folio() handler now also isn't called with NULL as the folio
value anymore.

Filesystems are expected to use the iomap_get_folio() helper for getting
locked folios in their ->page_prepare() handlers.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2023-01-18 10:44:04 -08:00
Andreas Gruenbacher 40405dddd9 iomap: Rename page_done handler to put_folio
The ->page_done() handler in struct iomap_page_ops is now somewhat
misnamed in that it mainly deals with unlocking and putting a folio, so
rename it to ->put_folio().

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2023-01-18 10:44:04 -08:00
Andreas Gruenbacher 80baab88bb iomap/gfs2: Unlock and put folio in page_done handler
When an iomap defines a ->page_done() handler in its page_ops, delegate
unlocking the folio and putting the folio reference to that handler.

This allows to fix a race between journaled data writes and folio
writeback in gfs2: before this change, gfs2_iomap_page_done() was called
after unlocking the folio, so writeback could start writing back the
folio's buffers before they could be marked for writing to the journal.
Also, try_to_free_buffers() could free the buffers before
gfs2_iomap_page_done() was done adding the buffers to the current
current transaction.  With this change, gfs2_iomap_page_done() adds the
buffers to the current transaction while the folio is still locked, so
the problems described above can no longer occur.

The only current user of ->page_done() is gfs2, so other filesystems are
not affected.  To catch out any out-of-tree users, switch from a page to
a folio in ->page_done().

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2023-01-18 10:44:04 -08:00
Jeff Layton 5970e15dbc filelock: move file locking definitions to separate header file
The file locking definitions have lived in fs.h since the dawn of time,
but they are only used by a small subset of the source files that
include it.

Move the file locking definitions to a new header file, and add the
appropriate #include directives to the source files that need them. By
doing this we trim down fs.h a bit and limit the amount of rebuilding
that has to be done when we make changes to the file locking APIs.

Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Steve French <stfrench@microsoft.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
2023-01-11 06:52:32 -05:00
Linus Torvalds 6830d50325 gfs2 fixes
- Revert a change to delete_work_func() that has gone wrong in commit
   c412a97cf6 ("gfs2: Use TRY lock in gfs2_inode_lookup for UNLINKED
   inodes").
 
 - Avoid dequeuing GL_ASYNC glock holders twice by first checking if the
   holder is still queued.
 
 - gfs2: Always check the inode size of inline inodes when reading in
   inodes to prevent corrupt filesystem images from causing weid errors.
 
 - Properly handle a race between gfs2_create_inode() and
   gfs2_inode_lookup() that causes insert_inode_locked4() to return
   -EBUSY.
 
 - Fix and clean up the interaction between gfs2_create_inode() and
   gfs2_evict_inode() by completely handling the inode deallocation and
  destruction in gfs2_evict_inode().
 
 - Remove support for glock holder auto-demotion as we have no current
   plans of using this feature again.
 
 - And a few more minor cleanups and clarifications.
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEJZs3krPW0xkhLMTc1b+f6wMTZToFAmOcXbEUHGFncnVlbmJh
 QHJlZGhhdC5jb20ACgkQ1b+f6wMTZToVmA/5AQ8BkPBTmQmwpP1Nlox21Gf1Pf8e
 8Nne19X85ZEkSSRU+2xzF9TetRzBM/LrdV1x0hjzUCveNFsiKBGer/kObT3gh8ST
 HqXRkJz96lHvcQMbNH1JFgYwz9tdxgbCc3xVBAWKeXgy+hrQsiJAnYvlRJpc5T67
 +sGAPcCoVXxmkHhW0STLKFY2jNUem6hxox6wDpEK8JEcMAQJa9s9RCiPlWVKUV/p
 hD9T0Hh336sRIVOOPLqY71tA2cgy4/d95zVo61h5vGpAwVkGkFnHtyMUAbwfJncf
 KljV8y8lLxFoxOcwLJ0Z9bbjM2+fHzOCUiSt245lup3+diTdjr/WN0bn68/wRLfd
 ktylQZdvbPO3q44LeQDQIlPT1xH/Srdm9tZbSyn6p4aRc9s07nVdqBHZ9b4TkREo
 4ZdeSu/OG0+h/kIn9HCPfrmxUKN3a9RMI4cXesLu7WmuNZylpHynVrX78K8TAFfq
 yfTsqjCIe84xppW3Rg2vS3DfAuLwE+QzeYzd9vT1zAKn7krS/f5IXVawG5Tj0K6y
 83eeGuw1BeAH6jNO7ZhomC5Gea/PPn02RmFXhlG1uKMHBMYMI0MBcYmUbp9lweCG
 2jiT43D3fTLMreaTiZUsOC1Qn7HPEb2SKm9YFXM2e5cQh2iLfpg9q0aKRYSYmwbC
 u/JixreXHb+HfkE=
 =mwok
 -----END PGP SIGNATURE-----

Merge tag 'gfs2-v6.1-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 updtaes from Andreas Gruenbacher:

 - Revert a change to delete_work_func() that has gone wrong in commit
   c412a97cf6 ("gfs2: Use TRY lock in gfs2_inode_lookup for UNLINKED
   inodes").

 - Avoid dequeuing GL_ASYNC glock holders twice by first checking if the
   holder is still queued.

 - gfs2: Always check the inode size of inline inodes when reading in
   inodes to prevent corrupt filesystem images from causing weid errors.

 - Properly handle a race between gfs2_create_inode() and
   gfs2_inode_lookup() that causes insert_inode_locked4() to return
   -EBUSY.

 - Fix and clean up the interaction between gfs2_create_inode() and
   gfs2_evict_inode() by completely handling the inode deallocation and
   destruction in gfs2_evict_inode().

 - Remove support for glock holder auto-demotion as we have no current
   plans of using this feature again.

 - And a few more minor cleanups and clarifications.

* tag 'gfs2-v6.1-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Remove support for glock holder auto-demotion (2)
  gfs2: Remove support for glock holder auto-demotion
  gfs2: Minor gfs2_try_evict cleanup
  gfs2: Partially revert gfs2_inode_lookup change
  gfs2: Add gfs2_inode_lookup comment
  gfs2: Uninline and improve glock_{set,clear}_object
  gfs2: Simply dequeue iopen glock in gfs2_evict_inode
  gfs2: Clean up after gfs2_create_inode rework
  gfs2: Avoid dequeuing GL_ASYNC glock holders twice
  gfs2: Make gfs2_glock_hold return its glock argument
  gfs2: Always check inode size of inline inodes
  gfs2: Cosmetic gfs2_dinode_{in,out} cleanup
  gfs2: Handle -EBUSY result of insert_inode_locked4
  gfs2: Fix and clean up create / evict interaction
  gfs2: Clean up initialization of "ip" in gfs2_create_inode
  gfs2: Get rid of ghs[] in gfs2_create_inode
  gfs2: Add extra error check in alloc_dinode
2022-12-17 08:18:04 -06:00
Andreas Gruenbacher 6b46a06100 gfs2: Remove support for glock holder auto-demotion (2)
As a follow-up to the previous commit, move the recovery related code in
__gfs2_glock_dq() to gfs2_glock_dq() where it better fits.  No
functional change.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2022-12-15 12:41:22 +01:00
Andreas Gruenbacher ba3e77a4a2 gfs2: Remove support for glock holder auto-demotion
Remove the support for glock holder auto-demotion (commit dc732906c2
and folow-ups) as we are not planning to use this feature, and the
additional code therefore only adds unnecessary complexity.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2022-12-15 12:41:22 +01:00
Andreas Gruenbacher f0c0ade8d8 gfs2: Minor gfs2_try_evict cleanup
In gfs2_try_evict(), when an inode can't be evicted, we are grabbing a
temporary reference on the inode glock to poke that glock.  That should
be safe, but it's easier to just grab an inode reference as we already
do earlier in this function.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2022-12-10 13:06:04 +01:00