Граф коммитов

139 Коммитов

Автор SHA1 Сообщение Дата
David Gow 6fc3a8636a kunit: tool: Enable virtio/PCI by default on UML
There are several tests which depend on PCI, and hence need a bunch of
extra options to run under UML. This makes it awkward to give
configuration instructions (whether in documentation, or as part of a
.kunitconfig file), as two separate, incompatible sets of config options
are required for UML and "most other architectures".

For non-UML architectures, it's possible to add default kconfig options
via the qemu_config python files, but there's no equivalent for UML. Add
a new tools/testing/kunit/configs/arch_uml.config file containing extra
kconfig options to use on UML.

Tested-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-07-08 11:22:29 -06:00
Daniel Latypov 53b466219f kunit: tool: make --kunitconfig repeatable, blindly concat
It's come up a few times that it would be useful to have --kunitconfig
be repeatable [1][2].

This could be done before with a bit of shell-fu, e.g.
  $ find fs/ -name '.kunitconfig' -exec cat {} + | \
    ./tools/testing/kunit/kunit.py run --kunitconfig=/dev/stdin
or equivalently:
  $ cat fs/ext4/.kunitconfig fs/fat/.kunitconfig | \
    ./tools/testing/kunit/kunit.py run --kunitconfig=/dev/stdin

But this can be fairly clunky to use in practice.

And having explicit support in kunit.py opens the door to having more
config fragments of interest, e.g. options for PCI on UML [1], UML
coverage [2], variants of tests [3].
There's another argument to be made that users can just use multiple
--kconfig_add's, but this gets very clunky very fast (e.g. [2]).

Note: there's a big caveat here that some kconfig options might be
incompatible. We try to give a clearish error message in the simple case
where the same option appears multiple times with conflicting values,
but more subtle ones (e.g. mutually exclusive options) will be
potentially very confusing for the user. I don't know we can do better.

Note 2: if you want to combine a --kunitconfig with the default, you
either have to do to specify the current build_dir
> --kunitconfig=.kunit --kunitconfig=additional.config
or
> --kunitconfig=tools/testing/kunit/configs/default.config --kunitconifg=additional.config
each of which have their downsides (former depends on --build_dir,
doesn't work if you don't have a .kunitconfig yet), etc.

Example with conflicting values:
> $ ./tools/testing/kunit/kunit.py config --kunitconfig=lib/kunit --kunitconfig=/dev/stdin <<EOF
> CONFIG_KUNIT_TEST=n
> CONFIG_KUNIT=m
> EOF
> ...
> kunit_kernel.ConfigError: Multiple values specified for 2 options in kunitconfig:
> CONFIG_KUNIT=y
>   vs from /dev/stdin
> CONFIG_KUNIT=m
>
> CONFIG_KUNIT_TEST=y
>   vs from /dev/stdin
> # CONFIG_KUNIT_TEST is not set

[1] https://lists.freedesktop.org/archives/dri-devel/2022-June/357616.html
[2] https://lore.kernel.org/linux-kselftest/CAFd5g45f3X3xF2vz2BkTHRqOC4uW6GZxtUUMaP5mwwbK8uNVtA@mail.gmail.com/
[3] https://lore.kernel.org/linux-kselftest/CANpmjNOdSy6DuO6CYZ4UxhGxqhjzx4tn0sJMbRqo2xRFv9kX6Q@mail.gmail.com/

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-07-08 11:22:02 -06:00
Daniel Latypov 1d202d1496 kunit: add coverage_uml.config to enable GCOV on UML
Now that kunit.py's --kunitconfig is repeatable, let's create a file to
hold the various options needed to enable coverage under UML.

This can be used like so:
$ ./tools/testing/kunit/kunit.py run \
  --kunitconfig=tools/testing/kunit/configs/all_tests_uml.config \
  --kunitconfig=tools/testing/kunit/configs/coverage_uml.config \
  --make_options=CC=/usr/bin/gcc-6

which on my system is enough to get coverage working [1].

This is still a clunky command, but far better than before.

[1] at the time of this commit, I get:
  Overall coverage rate:
    lines......: 11.6% (34112 of 295033 lines)
    functions..: 15.3% (3721 of 24368 functions)

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-07-07 18:06:36 -06:00
Daniel Latypov 8a7c6f859a kunit: tool: refactor internal kconfig handling, allow overriding
Currently, you cannot ovewrwrite what's in your kunitconfig via
--kconfig_add.
Nor can you override something in a qemu_config via either means.

This patch makes it so we have this level of priority
* --kconfig_add
* kunitconfig file (the default or the one from --kunitconfig)
* qemu_config

The rationale for this order is that the more "dynamic" sources of
kconfig options should take priority.

--kconfig_add is obviously the most dynamic.
And for kunitconfig, users probably tweak the file manually or specify
--kunitconfig more often than they delve into qemu_config python files.

And internally, we convert the kconfigs from a python list into a set or
dict fairly often. We should just use a dict internally.
We exposed the set transform in the past since we didn't define __eq__,
so also take the chance to shore up the kunit_kconfig.Kconfig interface.

Example
=======

Let's consider the unrealistic example where someone would want to
disable CONFIG_KUNIT.
I.e. they run
$ ./tools/testing/kunit/kunit.py config --kconfig_add=CONFIG_KUNIT=n

Before
------
We'd write the following
> # CONFIG_KUNIT is not set
> CONFIG_KUNIT_ALL_TESTS=y
> CONFIG_KUNIT_TEST=y
> CONFIG_KUNIT=y
> CONFIG_KUNIT_EXAMPLE_TEST=y

And we'd error out with
> ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
> This is probably due to unsatisfied dependencies.
> Missing: # CONFIG_KUNIT is not set

After
-----
We'd write the following
> # CONFIG_KUNIT is not set
> CONFIG_KUNIT_TEST=y
> CONFIG_KUNIT_ALL_TESTS=y
> CONFIG_KUNIT_EXAMPLE_TEST=y

And we'd error out with
> ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
> This is probably due to unsatisfied dependencies.
> Missing: CONFIG_KUNIT_EXAMPLE_TEST=y, CONFIG_KUNIT_TEST=y, CONFIG_KUNIT_ALL_TESTS=y

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-07-07 18:03:30 -06:00
Daniel Latypov a9333bd344 kunit: tool: introduce --qemu_args
Example usage:
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 \
  --kconfig_add=CONFIG_SMP=y --qemu_args='-smp 8'

Looking in the test.log, one can see
> smp: Bringing up secondary CPUs ...
> .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
> smp: Brought up 1 node, 8 CPUs

This flag would allow people to make tweaks like this without having to
create custom qemu_config files.

For consistency with --kernel_args, we allow users to repeat this
argument, e.g. you can tack on a --qemu_args='-m 2048', or you could
just append it to the first string ('-smp 8 -m 2048').

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-07-07 18:00:05 -06:00
Daniel Latypov 8c278d97ad kunit: tool: simplify creating LinuxSourceTreeOperations
Drop get_source_tree_ops() and just call what used to be
get_source_tree_ops_from_qemu_config() in both cases.

Also rename the functions to have shorter names and add a "_" prefix to
note they're not meant to be used outside this function.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-07-07 17:59:13 -06:00
Daniel Latypov 9241bc818d kunit: tool: cosmetic: don't specify duplicate kernel cmdline options
Context:
When using a non-UML arch, kunit.py will boot the test kernel with
options like these by default (this is x86_64):
> mem=1G console=tty kunit_shutdown=halt console=ttyS0 kunit_shutdown=reboot

The first three options are added unconditionally but are only intended
for UML.

1. 'mem=1G' is redundant with the '-m 1024' that we hard-code into the
   qemu commandline.

2. We specify a 'console' for all tools/testing/kunit/qemu_configs/*.py
   already, so 'console=tty' gets overwritten.

3. For QEMU, we need to use 'reboot', and for UML we need to use 'halt'.
   If you switch them, kunit.py will hang until the --timeout expires.

This patch:
Having these duplicate options is a bit noisy.
Switch so we only add UML-specific options for UML.

I.e. we now get
UML: 'mem=1G console=tty kunit_shutdown=halt' (unchanged)
x86_64: 'console=ttyS0 kunit_shutdown=reboot'

Side effect: you can't overwrite these options on UML w/ --kernel_arg.
But you already couldn't for QEMU (console, kunit_shutdown), and why
would you want to?

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-07-07 17:51:46 -06:00
Daniel Latypov e756dbebd9 kunit: tool: refactoring printing logic into kunit_printer.py
Context:
* kunit_kernel.py is importing kunit_parser.py just to use the
  print_with_timestamp() function
* the parser is directly printing to stdout, which will become an issue
  if we ever try to run multiple kernels in parallel

This patch introduces a kunit_printer.py file and migrates callers of
kunit_parser.print_with_timestamp() to call
kunit_printer.stdout.print_with_timestamp() instead.

Future changes:
If we want to support showing results for parallel runs, we could then
create new Printer's that don't directly write to stdout and refactor
the code to pass around these Printer objects.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-07-07 17:46:25 -06:00
Daniel Latypov 8a04930f2b kunit: tool: redo how we construct and mock LinuxSourceTree
Our main function currently has an optional `linux` argument which is
used to by our unit tests to inject a mock.
We currently have the same code copy-pasted several times to do
  if not linux:
    linux = MakeRealInstance(cli_args.foo, cli_args.bar, ...)

But in python, dependency injection isn't necessary or idiomatic when we
can just use mock.patch() to mock things out.

This change
1. adds a helper to create a LinuxSourceTree from the cli_args
2. drops the `linux` parameter in favor of mocking the __init__ func.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-07-07 17:45:59 -06:00
Daniel Latypov 76f0d6f581 kunit: tool: drop unused load_config argument
It's always set to true except in one test case.
And in that test case it can safely be set to true anyways.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-07-07 17:45:36 -06:00
David Gow e7eaffce47 kunit: tool: Use qemu-system-i386 for i386 runs
We're currently using the x86_64 qemu for i386 builds. While this is not
incorrect, it's probably more sensible to use the i386 one, which will
at least fail properly if we accidentally were to build a 64-bit kernel.

Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-05-18 17:03:54 -06:00
Brendan Higgins 8a7ccad38f kunit: tool: update riscv QEMU config with new serial dependency
The config for the serial console for riscv,
CONFIG_SERIAL_EARLYCON_RISCV_SBI, added a dependency,
CONFIG_RISCV_SBI_V01, at some point, so add that in to the base arch
config.

Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-05-16 13:24:09 -06:00
David Gow b18d284752 kunit: tool: Add list of all valid test configs on UML
It's often desirable (particularly in test automation) to run as many
tests as possible. This config enables all the tests which work as
builtins under UML at present, increasing the total tests run from 156
to 342 (not counting 36 'skipped' tests).

They can be run with:
./tools/testing/kunit/kunit.py run
--kunitconfig=./tools/testing/kunit/configs/all_tests_uml.config

This acts as an in-between point between the KUNIT_ALL_TESTS config
(which enables only tests whose dependencies are already enabled), and
the kunit_tool --alltests option, which tries to use allyesconfig,
taking a very long time to build and breaking very often.

Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-05-16 13:23:33 -06:00
Daniel Latypov 0453f984a7 kunit: tool: misc cleanups
This primarily comes from running pylint over kunit tool code and
ignoring some warnings we don't care about.
If we ever got a fully clean setup, we could add this to run_checks.py,
but we're not there yet.

Fix things like
* Drop unused imports
* check `is None`, not `== None` (see PEP 8)
* remove redundant parens around returns
* remove redundant `else` / convert `elif` to `if` where appropriate
* rename make_arch_qemuconfig() param to base_kunitconfig (this is the
  name used in the subclass, and it's a better one)
* kunit_tool_test: check the exit code for SystemExit (could be 0)

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-05-16 13:22:36 -06:00
Daniel Latypov 94507ee3e9 kunit: tool: minor cosmetic cleanups in kunit_parser.py
There should be no behavioral changes from this patch.

This patch removes redundant comment text, inlines a function used in
only one place, and other such minor tweaks.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-05-16 13:22:21 -06:00
Daniel Latypov dbf0b0d53a kunit: tool: make parser stop overwriting status of suites w/ no_tests
Consider this invocation
$ ./tools/testing/kunit/kunit.py parse <<EOF
  TAP version 14
  1..2
  ok 1 - suite
    # Subtest: no_tests_suite
    # catastrophic error!
  not ok 1 - no_tests_suite
EOF

It will have a 0 exit code even though there's a "not ok".

Consider this one:
$ ./tools/testing/kunit/kunit.py parse <<EOF
  TAP version 14
  1..2
  ok 1 - suite
  not ok 1 - no_tests_suite
EOF

It will a non-zero exit code.

Why?
We have this line in the kunit_parser.py
> parent_test = parse_test_header(lines, test)
where we have special handling when we see "# Subtest" and we ignore the
explicit reported "not ok 1" status!

Also, NO_TESTS at a suite-level only results in a non-zero status code
where then there's only one suite atm.

This change is the minimal one to make sure we don't overwrite it.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-05-16 13:22:12 -06:00
Daniel Latypov 33d4a933e9 kunit: tool: remove dead parse_crash_in_log() logic
This logic depends on the kernel logging a message containing
'kunit test case crashed', but there is no corresponding logic to do so.

This is likely a relic of the revision process KUnit initially went
through when being upstreamed.

Delete it given
1) it's been missing for years and likely won't get implemented
2) the parser has been moving to be a more general KTAP parser,
   kunit-only magic like this isn't how we'd want to implement it.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-05-16 13:21:54 -06:00
Daniel Latypov 9660209d94 kunit: tool: print clearer error message when there's no TAP output
Before:
$ ./tools/testing/kunit/kunit.py parse /dev/null
...
[ERROR] Test : invalid KTAP input!

After:
$ ./tools/testing/kunit/kunit.py parse /dev/null
...
[ERROR] Test <missing>: could not find any KTAP output!

This error message gets printed out when extract_tap_output() yielded no
lines. So while it could be because of malformed KTAP output from KUnit,
it could also be due to not having any KTAP output at all.

Try and make the error message here more clear.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-05-12 11:15:58 -06:00
Daniel Latypov 3f0a50f345 kunit: tool: stop using a shell to run kernel under QEMU
Note: this potentially breaks custom qemu_configs if people are using
them! But the fix for them is simple, don't specify multiple arguments
in one string and don't add on a redundant ''.

It feels a bit iffy to be using a shell in the first place.

There's the usual shenanigans where people could pass in arbitrary shell
commands via --kernel_arg (since we're just adding '' around the
kernel_cmdline) or via a custom qemu_config.
This isn't too much of a concern given the nature of this script (and
the qemu_config file is in python, you can do w/e you want already).

But it does have some other drawbacks.

One example of a kunit-specific pain point:
If the relevant qemu binary is missing, we get output like this:
> /bin/sh: line 1: qemu-system-aarch64: command not found
This in turn results in our KTAP parser complaining about
missing/invalid KTAP, but we don't directly show the error!
It's even more annoying to debug when you consider --raw_output only
shows KUnit output by default, i.e. you need --raw_output=all to see it.

Whereas directly invoking the binary, Python will raise a
FileNotFoundError for us, which is a noisier but more clear.

Making this change requires
* splitting parameters like ['-m 256'] into ['-m', '256'] in
  kunit/qemu_configs/*.py
* change [''] to [] in kunit/qemu_configs/*.py since otherwise
  QEMU fails w/ 'Device needs media, but drive is empty'
* dropping explicit quoting of the kernel cmdline
* using shlex.quote() when we print what command we're running
  so the user can copy-paste and run it

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-05-12 11:15:42 -06:00
Daniel Latypov c249764320 kunit: tool: update test counts summary line format
Before:
> Testing complete. Passed: 137, Failed: 0, Crashed: 0, Skipped: 36, Errors: 0

After:
> Testing complete. Ran 173 tests: passed: 137, skipped: 36

Even with our current set of statuses, the output is a bit verbose.
It could get worse in the future if we add more (e.g. timeout, kasan).
Let's only print the relevant ones.

I had previously been sympathetic to the argument that always
printing out all the statuses would make it easier to parse results.
But now we have commit acd8e8407b ("kunit: Print test statistics on
failure"), there are test counts printed out in the raw output.
We don't currently print out an overall total across all suites, but it
would be easy to add, if we see a need for that.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-05-12 11:15:26 -06:00
Daniel Latypov baa3331503 kunit: tool: more descriptive metavars/--help output
Before, our help output contained lines like
  --kconfig_add KCONFIG_ADD
  --qemu_config qemu_config
  --jobs jobs

They're not very helpful.

The former kind come from the automatic 'metavar' we get from argparse,
the uppercase version of the flag name.
The latter are where we manually specified metavar as the flag name.

After:
  --build_dir DIR
  --make_options X=Y
  --kunitconfig PATH
  --kconfig_add CONFIG_X=Y
  --arch ARCH
  --cross_compile PREFIX
  --qemu_config FILE
  --jobs N
  --timeout SECONDS
  --raw_output [{all,kunit}]
  --json [FILE]

This patch tries to make the code more clear by specifying the _type_ of
input we expect, e.g. --build_dir is a DIR, --qemu_config is a FILE.
I also switched it to uppercase since it looked more clearly like
placeholder text that way.

This patch also changes --raw_output to specify `choices` to make it
more clear what the options are, and this way argparse can validate it
for us, as shown by the added test case.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-04 16:22:14 -06:00
Kees Cook d34f82d67d kunit: tool: Do not colorize output when redirected
Filling log files with color codes makes diffs and other comparisons
difficult. Only emit vt100 codes when the stdout is a TTY.

Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: linux-kselftest@vger.kernel.org
Cc: kunit-dev@googlegroups.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-04 15:23:50 -06:00
Daniel Latypov 885210d348 kunit: tool: properly report the used arch for --json, or '' if not known
Before, kunit.py always printed "arch": "UM" in its json output, but...
1. With `kunit.py parse`, we could be parsing output from anywhere, so
    we can't say that.
2. Capitalizing it is probably wrong, as it's `ARCH=um`
3. Commit 87c9c16317 ("kunit: tool: add support for QEMU") made it so
   kunit.py could knowingly run a different arch, yet we'd still always
   claim "UM".

This patch addresses all of those. E.g.

1.
$ ./tools/testing/kunit/kunit.py parse .kunit/test.log --json | grep -o '"arch.*' | sort -u
"arch": "",

2.
$ ./tools/testing/kunit/kunit.py run --json | ...
"arch": "um",

3.
$ ./tools/testing/kunit/kunit.py run --json --arch=x86_64 | ...
"arch": "x86_64",

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-04 15:22:30 -06:00
Daniel Latypov ee96d25f2f kunit: tool: refactor how we plumb metadata into JSON
When using --json, kunit.py run/exec/parse will produce results in
KernelCI json format.
As part of that, we include the build_dir that was used, and we
(incorrectly) hardcode in the arch, etc.

We'll want a way to plumb more values (as well as the correct `arch`),
so this patch groups those fields into kunit_json.Metadata type.
This patch should have no user visible changes.

And since we only used build_dir in KunitParseRequest for json, we can
now move it out of that struct and add it into KunitExecRequest, which
needs it and used to get it via inheritance.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-04 15:22:23 -06:00
Daniel Latypov 6bd0f52ee8 kunit: tool: readability tweaks in KernelCI json generation logic
Use a more idiomatic check that a list is non-empty (`if mylist:`) and
simplify the function body by dedenting and using a dict to map between
the kunit TestStatus enum => KernelCI json status string.

The dict hopefully makes it less likely to have bugs like commit
9a6bb30a88 ("kunit: tool: fix --json output for skipped tests").

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-04 15:22:15 -06:00
Daniel Latypov aa1c05558e kunit: tool: simplify code since build_dir can't be None
--build_dir is set to a default of '.kunit' since commit ddbd60c779
("kunit: use --build_dir=.kunit as default"), but even before then it
was explicitly set to ''.

So outside of one unit test, there was no way for the build_dir to be
ever be None, and we can simplify code by fixing the unit test and
enforcing that via updated type annotations.

E.g. this lets us drop `get_file_path()` since it's now exactly
equivalent to os.path.join().

Note: there's some `if build_dir` checks that also fail if build_dir is
explicitly set to '' that just guard against passing "O=" to make.
But running `make O=` works just fine, so drop these checks.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-04 14:25:58 -06:00
Daniel Latypov e6f6192065 kunit: tool: drop last uses of collections.namedtuple
Since we formally require python3.7+ since commit df4b0807ca
("kunit: tool: Assert the version requirement"), we can just use
@dataclasses.dataclass instead.

In kunit_config.py, we used namedtuple to create a hashable type that
had `name` and `value` fields and had to subclass it to define a custom
`__str__()`.
@datalcass lets us just define one type instead.

In qemu_config.py, we use namedtuple to allow modules to define various
parameters. Using @dataclass, we can add type-annotations for all these
fields, making our code more typesafe and making it easier for users to
figure out how to define new configs.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-04 14:25:53 -06:00
Daniel Latypov 89aa72cd30 kunit: tool: drop unused KernelDirectoryPath var
Commit be886ba90c ("kunit: run kunit_tool from any directory")
introduced this variable, but it was unused even in that commit.

Since it's still unused now and callers can instead use
get_kernel_root_path(), delete this var.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-04 14:25:47 -06:00
Daniel Latypov 00f75043e4 kunit: tool: make --json handling a bit clearer
Currently kunit_json.get_json_result() will output the JSON-ified test
output to json_path, but iff it's not "stdout".

Instead, move the responsibility entirely over to the one caller.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-04-04 14:25:37 -06:00
Linus Torvalds d51b1b33c5 linux-kselftest-kunit-5.18-rc1
This KUnit update for Linux 5.18-rc1 consists of:
 
 - changes to decrease macro layering string, integer, EQ/NE asserts
 - remove unused macros
 - several cleanups and fixes
 - new list tests for list_del_init_careful(), list_is_head() and
   list_entry_is_head()
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmI5KcsACgkQCwJExA0N
 Qxy37BAA4NKkZHOpIk3P+aHbqE/S+Utg+gHsFOS7srp8wTeM1nSVMCP7MYefBiRs
 4+R6RViCAvd5skK5/4UkYp53KePOww4Qo5zZKfN5J+479juMk+8CJtk3QwgY0IAu
 jaI3nZlvo+WW+2OdIXdYNNScLR5mKHVSxpoLs1KtJZXm62RQgycoGCrIEtiAKYTk
 w2mMUxG4X0upIF08xTfb5UDQyyMjqWMZJZ0l65xsJr4bgU+It0HoYCmPzqufpGza
 ZgTWac8Iai1sEzxPXaTMLCM6V3QlbESIaIB6J13BWS+OvKs7cbcIADnG79Nvh7eH
 v8v9fXTojlS6vSNJUqxA8S0f2kGJ2mVmePg11ZeOh2oqaF6l1bs7iFJQPc3PidRl
 /dobIMBGlEI2yi9vaRz6/roDp44K56OlbthtSlaEc1NLyI/+nGuG7hzXuXkmoNiX
 LloMfTmcCtrWGUnZH80K18l03T1swEiKzLuYMlzNvVz7jiIoZhXw4YG8H2FHJrpf
 9LOJFEJgVcCp5JmDTk19HwN1OogH8TcbaJkQE0EthxExb2LW5BfO9cXzQ/n+uapl
 QoN+5ig1x2ozyplVOhz/6VbmKxf7EDEOiYr1F1Kbc5qdSm1kdRQQTrMaWJkQ+KzT
 bo+yWr/2zkAqrCns5lbUERfhBSx9jZqcnmUPcdcXLd7qse0cnKc=
 =e1/u
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-kunit-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan:

 - changes to decrease macro layering string, integer, EQ/NE asserts

 - remove unused macros

 - several cleanups and fixes

 - new list tests for list_del_init_careful(), list_is_head() and
   list_entry_is_head()

* tag 'linux-kselftest-kunit-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  list: test: Add a test for list_entry_is_head()
  list: test: Add a test for list_is_head()
  list: test: Add test for list_del_init_careful()
  kunit: cleanup assertion macro internal variables
  kunit: factor out str constants from binary assertion structs
  kunit: consolidate KUNIT_INIT_BINARY_ASSERT_STRUCT macros
  kunit: remove va_format from kunit_assert
  kunit: tool: drop mostly unused KunitResult.result field
  kunit: decrease macro layering for EQ/NE asserts
  kunit: decrease macro layering for integer asserts
  kunit: reduce layering in string assertion macros
  kunit: drop unused intermediate macros for ptr inequality checks
  kunit: make KUNIT_EXPECT_EQ() use KUNIT_EXPECT_EQ_MSG(), etc.
  kunit: drop unused assert_type from kunit_assert and clean up macros
  kunit: split out part of kunit_assert into a static const
  kunit: factor out kunit_base_assert_format() call into kunit_fail()
  kunit: drop unused kunit* field in kunit_assert
  kunit: move check if assertion passed into the macros
  kunit: add example test case showing off all the expect macros
2022-03-23 12:56:39 -07:00
Daniel Latypov de4d73b16d kunit: fix missing f in f-string in run_checks.py
We're missing the `f` prefix to have python do string interpolation, so
we'd never end up printing what the actual "unexpected" error is.

Fixes: ee92ed3836 ("kunit: add run_checks.py script to validate kunit changes")
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-02-02 11:12:15 -07:00
Daniel Latypov 95dcbc55fe kunit: tool: drop mostly unused KunitResult.result field
This field is only used to pass along the parsed Test object from
parse_tests().
Everywhere else the `result` field is ignored.

Instead make parse_tests() explicitly return a KunitResult and Test so
we can retire the `result` field.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-01-31 11:55:18 -07:00
Michał Winiarski 235528072f kunit: tool: Import missing importlib.abc
Python 3.10.0 contains:
9e09849d20 ("bpo-41006: importlib.util no longer imports typing (GH-20938)")

It causes importlib.util to no longer import importlib.abs, which leads
to the following error when trying to use kunit with qemu:
AttributeError: module 'importlib' has no attribute 'abc'. Did you mean: '_abc'?

Add the missing import.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-01-25 12:59:43 -07:00
David Gow ad659ccb54 kunit: tool: Default --jobs to number of CPUs
The --jobs parameter for kunit_tool currently defaults to 8 CPUs,
regardless of the number available. For systems with significantly more
(or less), this is not as efficient. Instead, default --jobs to the
number of CPUs available to the process: while there are as many
superstitions as to exactly what the ideal jobs:CPU ratio is, this seems
sufficiently sensible to me.

A new helper function to get the default number of jobs is added:
get_default_jobs() -- this is used in kunit_tool_test instead of a
hardcoded value, or an explicit call to len(os.sched_getaffinity()), so
should be more flexible if this needs to change in the future.

Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-15 16:44:55 -07:00
Daniel Latypov 85310a62ca kunit: tool: fix newly introduced typechecker errors
After upgrading mypy and pytype from pip, we see 2 new errors when
running ./tools/testing/kunit/run_checks.py.

Error #1: mypy and pytype
They now deduce that importlib.util.spec_from_file_location() can return
None and note that we're not checking for this.

We validate that the arch is valid (i.e. the file exists) beforehand.
Add in an `asssert spec is not None` to appease the checkers.

Error #2: pytype bug https://github.com/google/pytype/issues/1057
It doesn't like `from datetime import datetime`, specifically that a
type shares a name with a module.

We can workaround this by either
* renaming the import or just using `import datetime`
* passing the new `--fix-module-collisions` flag to pytype.

We pick the first option for now because
* the flag is quite new, only in the 2021.11.29 release.
* I'd prefer if people can just run `pytype <file>`

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-15 16:44:49 -07:00
Daniel Latypov 1ee2ba89be kunit: tool: make `build` subcommand also reconfigure if needed
If I created a kunitconfig file that was incomplete, then
$ ./tools/testing/kunit/kunit.py build --kunitconfig=my_kunitconfig
would silently drop all the options with unmet dependencies!

This is because it doesn't do the config check that `kunit.py config`
does.

So if I want to safely build a kernel for testing, I have to do
$ ./tools/testing/kunit/kunit.py config <flags>
$ ./tools/testing/kunit/kunit.py build <flags, again>

It seems unlikely that any user of kunit.py would want the current
`build` semantics.
So make it effectively do `kunit.py config` + `kunit.py build`.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-15 11:51:16 -07:00
Daniel Latypov e0cc8c052a kunit: tool: delete kunit_parser.TestResult type
The `log` field is unused, and the `status` field is accessible via
`test.status`.

So it's simpler to just return the main `Test` object directly.

And since we're no longer returning a namedtuple, which has no type
annotations, this hopefully means typecheckers are better equipped to
find any errors.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-15 11:50:56 -07:00
Daniel Latypov db1679813f kunit: tool: use dataclass instead of collections.namedtuple
namedtuple is a terse way of defining a collection of fields.
However, it does not allow us to annotate the type of these fields.
It also doesn't let us have any sort of inheritance between types.

Since commit df4b0807ca ("kunit: tool: Assert the version
requirement"), kunit.py has asserted that it's running on python >=3.7.

So in that case use a 3.7 feature, dataclasses, to replace these.

Changes in detail:
* Make KunitExecRequest contain all the fields needed for exec_tests
* Use inheritance to dedupe fields
  * also allows us to e.g. pass a KUnitRequest in as a KUnitParseRequest
  * this has changed around the order of some fields
* Use named arguments when constructing all request objects in kunit.py
  * This is to prevent accidentally mixing up fields, etc.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-15 11:50:41 -07:00
Daniel Latypov 7fa7ffcf9b kunit: tool: suggest using decode_stacktrace.sh on kernel crash
kunit.py isn't very clear that
1) it stashes a copy of the unparsed output in $BUILD_DIR/test.log
2) it sets $BUILD_DIR=.kunit by default

So it's trickier than it should be for a user to come up with the right
command to do so.

Make kunit.py print out a command for this if
a) we saw a test case crash
b) we only ran one kernel (test.log only contains output from the last)

Example suggested command:
$ scripts/decode_stacktrace.sh .kunit/vmlinux .kunit < .kunit/test.log | tee .kunit/decoded.log | ./tools/testing/kunit/kunit.py parse

Without debug info a user might see something like
[14:11:25] Call Trace:
[14:11:25] ? kunit_binary_assert_format (:?)
[14:11:25] kunit_try_run_case (test.c:?)
[14:11:25] ? __kthread_parkme (kthread.c:?)
[14:11:25] kunit_generic_run_threadfn_adapter (try-catch.c:?)
[14:11:25] ? kunit_generic_run_threadfn_adapter (try-catch.c:?)
[14:11:25] kthread (kthread.c:?)
[14:11:25] new_thread_handler (:?)
[14:11:25] [CRASHED]

`tee` is in GNU coreutils, so it seems fine to add that into the
pipeline by default, that way users can inspect the otuput in more
detail.

Note: to turn on debug info, users would need to do something like
$ echo -e 'CONFIG_DEBUG_KERNEL=y\nCONFIG_DEBUG_INFO=y' >> .kunit/.kunitconfig
$ ./tools/testing/kunit/kunit.py config
$ ./tools/testing/kunit/kunit.py build
$ <then run decode_stacktrace.sh now vmlinux is updated>

This feels too clunky to include in the instructions.
With --kconfig_add [1], it would become a bit less painful.

[1] https://lore.kernel.org/linux-kselftest/20211106013058.2621799-2-dlatypov@google.com/

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-13 13:59:19 -07:00
Daniel Latypov 4c2911f1e1 kunit: tool: reconfigure when the used kunitconfig changes
Problem: currently, if you remove something from your kunitconfig,
kunit.py will not regenerate the .config file.
The same thing happens if you did --kunitconfig_add=CONFIG_KASAN=y [1]
and then ran again without it. Your new run will still have KASAN.

The reason is that kunit.py won't regenerate the .config file if it's a
superset of the kunitconfig. This speeds it up a bit for iterating.

This patch adds an additional check that forces kunit.py to regenerate
the .config file if the current kunitconfig doesn't match the previous
one.

What this means:
* deleting entries from .kunitconfig works as one would expect
* dropping  a --kunitconfig_add also triggers a rebuild
* you can still edit .config directly to turn on new options

We implement this by creating a `last_used_kunitconfig` file in the
build directory (so .kunit, by default) after we generate the .config.
When comparing the kconfigs, we compare python sets, so duplicates and
permutations don't trip us up.

The majority of this patch is adding unit tests for the existing logic
and for the new case where `last_used_kunitconfig` differs.

[1] https://lore.kernel.org/linux-kselftest/20211106013058.2621799-2-dlatypov@google.com/

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-13 13:59:03 -07:00
Daniel Latypov c44895b6cd kunit: tool: revamp message for invalid kunitconfig
The current error message is precise, but not very clear if you don't
already know what it's talking about, e.g.

> $ make ARCH=um olddefconfig O=.kunit
> ERROR:root:Provided Kconfig is not contained in validated .config. Following fields found in kunitconfig, but not in .config: CONFIG_DRM=y

Try to reword the error message so that it's
* your missing options usually have unsatisified dependencies
* if you're on UML, that might be the cause (it is, in this example)

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-13 13:57:30 -07:00
Daniel Latypov 9f57cc76ec kunit: tool: add --kconfig_add to allow easily tweaking kunitconfigs
E.g. run tests but with KASAN
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 --kconfig_add=CONFIG_KASAN=y

This also works with --kunitconfig
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 --kunitconfig=fs/ext4 --kconfig_add=CONFIG_KASAN=y

This flag is inspired by TuxMake's --kconfig-add, see
https://gitlab.com/Linaro/tuxmake#examples.

Our version just uses "_" as the delimiter for consistency with
pre-existing flags like --build_dir, --make_options, --kernel_args, etc.

Note: this does make it easier to run into a pre-existing edge case:
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 --kconfig_add=CONFIG_KASAN=y
$ ./tools/testing/kunit/kunit.py run --arch=x86_64
This second invocation ^ still has KASAN enabled!

kunit.py won't call olddefconfig if our current .config is already a
superset of the provided kunitconfig.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-13 13:56:27 -07:00
Daniel Latypov 98978490cc kunit: tool: move Kconfig read_from_file/parse_from_string to package-level
read_from_file() clears its `self` Kconfig object and parses a config
file.

It is a way to construct Kconfig objects more so than an operation on
Kconfig objects. This is reflected in the fact its only ever used as:
  kconfig = kunit_config.Kconfig()
  kconfig.read_from_file(path)

So clean this up and simplify callers by replacing it with
  kconfig = kunit_config.parse_file(path)

Do the same thing for the related parse_from_string() function as well.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-13 13:53:30 -07:00
Daniel Latypov 142189f09c kunit: tool: print parsed test results fully incrementally
With the parser rework [1] and run_kernel() rework [2], this allows the
parser to print out test results incrementally.

Currently, that's held up by the fact that the LineStream eagerly
pre-fetches the next line when you call pop().
This blocks parse_test_result() from returning until the line *after*
the "ok 1 - test name" line is also printed.

One can see this with the following example:
$ (echo -e 'TAP version 14\n1..3\nok 1 - fake test'; sleep 2; echo -e 'ok 2 - fake test 2'; sleep 3; echo -e 'ok 3 - fake test 3') | ./tools/testing/kunit/kunit.py parse

Before this patch [1]: there's a pause before 'fake test' is printed.
After this patch: 'fake test' is printed out immediately.

This patch also adds
* a unit test to verify LineStream's behavior directly
* a test case to ensure that it's lazily calling the generator
* an explicit exception for when users go beyond EOF

[1] https://lore.kernel.org/linux-kselftest/20211006170049.106852-1-dlatypov@google.com/
[2] https://lore.kernel.org/linux-kselftest/20211005011340.2826268-1-dlatypov@google.com/

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-13 13:37:38 -07:00
David Gow e56e482855 kunit: tool: Report an error if any test has no subtests
It's possible for a test to have a subtest header, but zero valid
subtests. We used to error on this if the test plan had no subtests
listed, but it's possible to have subtests without a test plan (indeed,
this is how parameterised tests work).

Tests with 0 subtests now have the result NO_TESTS, and will report an
error (which does not halt test execution, but is printed in a scary red
colour and is noted in the results summary).

Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-13 13:36:15 -07:00
David Gow c68077b146 kunit: tool: Do not error on tests without test plans
The (K)TAP spec encourages test output to begin with a 'test plan': a
count of the number of tests being run of the form:
1..n

However, some test suites might not know the number of subtests in
advance (for example, KUnit's parameterised tests use a generator
function). In this case, it's not possible to print the test plan in
advance.

kunit_tool already parses test output which doesn't contain a plan, but
reports an error. Since we want to use nested subtests with KUnit
paramterised tests, remove this error.

Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-13 13:36:06 -07:00
Daniel Latypov ee92ed3836 kunit: add run_checks.py script to validate kunit changes
This formalizes the checks KUnit maintainers have been running (or in
other cases: forgetting to run).

This script also runs them all in parallel to minimize friction (pytype
can be fairly slow, but not slower than running kunit.py).

Example output:
$ ./tools/testing/kunit/run_checks.py
Waiting on 4 checks (kunit_tool_test.py, kunit smoke test, pytype, mypy)...
kunit_tool_test.py: PASSED
mypy: PASSED
pytype: PASSED
kunit smoke test: PASSED

On failure or timeout (5 minutes), it'll dump out the stdout/stderr.
E.g. adding in a type-checking error:
  mypy: FAILED
  > kunit.py:54: error: Name 'nonexistent_function' is not defined
  > Found 1 error in 1 file (checked 8 source files)

mypy and pytype are two Python type-checkers and must be installed.
This file treats them as optional and will mark them as SKIPPED if not
installed.

This tool also runs `kunit.py run --kunitconfig=lib/kunit` to run
KUnit's own KUnit tests and to verify KUnit kernel code and kunit.py
play nicely together.

It uses --build_dir=kunit_run_checks so as not to clobber the default
build_dir, which helps make it faster by reducing the need to rebuild,
esp. if you're been passing in --arch instead of using UML.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-13 13:35:22 -07:00
Daniel Latypov 9a6bb30a88 kunit: tool: fix --json output for skipped tests
Currently, KUnit will report SKIPPED tests as having failed if one uses
--json.

Add the missing if statement to set the appropriate status ("SKIP").
See https://api.kernelci.org/schema-test-case.html:
  "status": {
      "type": "string",
      "description": "The status of the execution of this test case",
      "enum": ["PASS", "FAIL", "SKIP", "ERROR"],
      "default": "PASS"
  },
with this, we now can properly produce all four of the statuses.

Fixes: 5acaf6031f ("kunit: tool: Support skipped tests in kunit_tool")
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-12-13 13:33:30 -07:00
Daniel Latypov 52a5d80a22 kunit: tool: fix typecheck errors about loading qemu configs
Currently, we have these errors:
$ mypy ./tools/testing/kunit/*.py
tools/testing/kunit/kunit_kernel.py:213: error: Item "_Loader" of "Optional[_Loader]" has no attribute "exec_module"
tools/testing/kunit/kunit_kernel.py:213: error: Item "None" of "Optional[_Loader]" has no attribute "exec_module"
tools/testing/kunit/kunit_kernel.py:214: error: Module has no attribute "QEMU_ARCH"
tools/testing/kunit/kunit_kernel.py:215: error: Module has no attribute "QEMU_ARCH"

exec_module
===========

pytype currently reports no errors, but that's because there's a comment
disabling it on 213.

This is due to https://github.com/python/typeshed/pull/2626.
The fix is to assert the loaded module implements the ABC
(abstract base class) we want which has exec_module support.

QEMU_ARCH
=========

pytype is fine with this, but mypy is not:
https://github.com/python/mypy/issues/5059

Add a check that the loaded module does indeed have QEMU_ARCH.
Note: this is not enough to appease mypy, so we also add a comment to
squash the warning.

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-29 13:05:47 -06:00
Daniel Latypov 2ab5d5e67f kunit: tool: continue past invalid utf-8 output
kunit.py currently crashes and fails to parse kernel output if it's not
fully valid utf-8.

This can come from memory corruption or just inadvertently printing
out binary data as strings.

E.g. adding this line into a kunit test
  pr_info("\x80")
will cause this exception
  UnicodeDecodeError: 'utf-8' codec can't decode byte 0x80 in position
  1961: invalid start byte

We can tell Python how to handle errors, see
https://docs.python.org/3/library/codecs.html#error-handlers

Unfortunately, it doesn't seem like there's a way to specify this in
just one location, so we need to repeat ourselves quite a bit.

Specify `errors='backslashreplace'` so we instead:
* print out the offending byte as '\x80'
* try and continue parsing the output.
  * as long as the TAP lines themselves are valid, we're fine.

Fixed spelling/grammar in commit log:
Shuah Khan <<skhan@linuxfoundation.org>

Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-25 13:06:45 -06:00