Граф коммитов

13 Коммитов

Автор SHA1 Сообщение Дата
Mikko Perttunen d1e6bc0ca0 mailbox: tegra-hsp: Set lockdep class dynamically
On Tegra194, due to both BPMP and TCU using mailboxes, we get a
lockdep spew at boot. Both are using different instances of HSP,
so this is harmless. As such give each HSP instance a different
lockdep class.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-02-14 23:28:40 -06:00
Thierry Reding 0ebdf11699 firmware: tegra: Enable BPMP support on Tegra234
Enable support for the BPMP on Tegra234 to avoid relying on Tegra194
being enabled to pull in the needed OF device ID table entry.

On simulation platforms the BPMP hasn't booted up yet by the time we
probe the BPMP driver and the BPMP hasn't had a chance to mark the
doorbell as ringable by the CCPLEX. This corresponding check in the
BPMP driver will therefore fail. Work around this by disabling the
check on simulation platforms.

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-18 15:57:04 +02:00
Jon Hunter c745da8d43 mailbox: tegra: Fix superfluous IRQ error message
Commit 7723f4c5ec ("driver core: platform: Add an error message to
platform_get_irq*()") added an error message to avoid drivers having
to print an error message when IRQ lookup fails. However, there are
some cases where IRQs are optional and so new optional versions of
the platform_get_irq*() APIs have been added for these cases.

The IRQs for Tegra HSP module are optional because not all instances
of the module have the doorbell and all of the shared interrupts.
Hence, since the above commit was applied the following error messages
are now seen on Tegra194 ...

 ERR KERN tegra-hsp c150000.hsp: IRQ doorbell not found
 ERR KERN tegra-hsp c150000.hsp: IRQ shared0 not found

The Tegra HSP driver deliberately does not fail if these are not found
and so fix the above errors by updating the Tegra HSP driver to use
the platform_get_irq_byname_optional() API.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20191011083459.11551-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12 15:09:19 +01:00
Bitan Biswas 20b5d24c76 mailbox: tegra: avoid resume NULL mailboxes
If Tegra HSP device tree does not have 'shared irqs',
mailboxes pointer is NULL. Add non-NULL HSP mailboxes
check in resume callback before tegra_hsp_mailbox_startup()
call and prevent NULL pointer exception.

Signed-off-by: Bitan Biswas <bbiswas@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-07-10 23:08:44 -05:00
Bitan Biswas b1a399530c mailbox: tegra: hsp: add noirq resume
Add noirq resume instead of resume callback for Tegra HSP. Tegra HSP
resume needs tegra_hsp_doorbell_startup() call to fix timeout error for
tegra_bpmp_transfer() during genpd resume noirq on Jetson TX2.

Signed-off-by: Bitan Biswas <bbiswas@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-07-10 23:08:44 -05:00
Thomas Gleixner 2025cf9e19 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 263 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00
Arnd Bergmann a904327e98 mailbox: tegra-hsp: mark suspend function as __maybe_unused
We get a warning about this being unused when CONFIG_PM is disabled:

drivers/mailbox/tegra-hsp.c:782:12: error: 'tegra_hsp_resume' defined but not used [-Werror=unused-function]

Fixes: 9a63f0f405 ("mailbox: tegra-hsp: Add suspend/resume support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2019-03-06 20:31:03 -06:00
Thierry Reding d69e11648e mailbox: tegra-hsp: Use device-managed registration API
In order to get rid of a lot of cleanup boilerplate code, use the
device-managed registration API.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21 22:31:26 -06:00
Bartosz Golaszewski a54d03ed01 mailbox: tegra-hsp: use devm_kstrdup_const()
Use devm_kstrdup_const() in the tegra-hsp driver. This mostly serves as
an example of how to use this new routine to shrink driver code.

Also use devm_kzalloc() instead of regular kzalloc() to shrink the
driver even more.

Doorbell objects are only removed in the driver's remove callback so
it's safe to convert all memory allocations to devres.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21 22:31:26 -06:00
Thierry Reding 9a63f0f405 mailbox: tegra-hsp: Add suspend/resume support
Upon resuming from a system sleep state, the interrupts for all active
shared mailboxes need to be reenabled, otherwise they will not work.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21 22:31:26 -06:00
Thierry Reding 91b1b1c3da mailbox: tegra-hsp: Add support for shared mailboxes
The Tegra HSP block supports 'shared mailboxes' that are simple 32-bit
registers consisting of a FULL bit in MSB position and 31 bits of data.
The hardware can be configured to trigger interrupts when a mailbox
is empty or full. Add support for these shared mailboxes to the HSP
driver.

The initial use for the mailboxes is the Tegra Combined UART. For this
purpose, we use interrupts to receive data, and spinning to wait for
the transmit mailbox to be emptied to minimize unnecessary overhead.

Based on work by Mikko Perttunen <mperttunen@nvidia.com>.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-21 22:31:26 -06:00
Dan Carpenter 68050eb6c6 mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
We have to use the _safe version of list_for_each() because we're
freeing the pointer as we go along.  (This might not show up testing
depending on what config options you have enabled).

Fixes: 0fe88461a0 ("mailbox: Add Tegra HSP driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-18 14:32:13 +01:00
Thierry Reding 0fe88461a0 mailbox: Add Tegra HSP driver
This driver exposes a mailbox interface for interprocessor communication
using the Hardware Synchronization Primitives (HSP) module's doorbell
mechanism. There are multiple HSP instances and they provide additional
features such as shared mailboxes, shared and arbitrated semaphores.

A driver for a remote processor can use the mailbox client provided by
the HSP driver and build an IPC protocol on top of this synchronization
mechanism.

Based on work by Joseph Lo <josephl@nvidia.com>.

Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-18 14:26:13 +01:00