The patch 2080913e017a: "staging: r8712u: Fix regression caused by
commit 8c213fa" from Feb 25, 2012, leads to the following Smatch
complaint:
drivers/staging/rtl8712/usb_intf.c:629 r871xu_dev_remove()
warn: variable dereferenced before check 'padapter' (see line 625)
The fix is to move the new statements inside the block where padapter
is not NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems the USB device ID 0bda:8192 is wrongly assigned to the
RTL8192SU chip and not to the RTL8191SU chip in the USB database.
So this patch moves this device ID from the rtl8192u staging
driver to the rtl8712 staging driver.
This patch was tested with a Radicom WIFIHU embedded wireless
module with a RTL8191SU chip and the USB device ID 0bda:8192.
Without the patch the rtl8192u driver claims this device, but
it does not work. With the patch the rtl8712 driver services
this device and it works.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove copies of the double USB device IDs:
- 0bda:8172
- 0bda:8174
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit c6dc001 "staging: r8712u: Merging Realtek's latest (v2.6.6).
Various fixes", the returned qual.qual member of the iw_statistics
struct was changed. For strong signals, this change made no difference;
however for medium and weak signals it results in a low signal that
shows considerable fluctuation, When using wicd for a medium-strength
AP, the value reported in the status line is reduced from 100% to 60% by
this bug.
This problem is reported in https://bugzilla.kernel.org/show_bug.cgi?id=42826.
Reported-and-tested-by: Robert Crawford <wrc1944@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 8c213fa "staging: r8712u: Use asynchronous firmware loading",
the command to release the firmware was placed in the wrong routine.
In combination with the bug introduced in commit a5ee652 "staging: r8712u:
Interface-state not fully tracked", the driver attempts to upload firmware
that had already been released. This bug is the source of one of the
problems in https://bugs.archlinux.org/task/27996#comment89833.
Tested-by: Alberto Lago Ballesteros <saniukeokusainaya@gmail.com>
Tested-by: Adrian <agib@gmx.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit a5ee652 "staging: r8712u: Interface-state not fully tracked",
the private boolean "bup" was set false when the interface was brought down,
as that seemed appropriate. This change has not caused any problems when
using NetworkManager or manual control of the device; however, when wicd
control is used, there is a locking problem in wpa_supplicant, as shown in
https://bugzilla.kernel.org/show_bug.cgi?id=42818.
This fix reverts the only code change in commit a5ee652. My
analysis is that "bup" is badly named. In its present form, it
seems to indicate the up/down state of the device, but its usage
is more consistent with an initialized/uninitialized state. That
problem will be addressed in a later patch.
Note: Commit 8c213fa, which introdued asynchronous firmware loading
for this driver, exposed this bug to a greater extent. That bug
is addressed in the next patch in this series.
This bug is also responsible for the bug in
https://bugzilla.kernel.org/show_bug.cgi?id=42815. and this bug is
also part of the problems discussed at https://bugs.archlinux.org/task/27996#comment89950.
Tested-by: Alberto Lago Ballesteros <saniukeokusainaya@gmail.com>
Tested-by: Adrian <agib@gmx.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [3.2+]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was done to resolve some merge issues with the following files that
had changed in both branches:
drivers/staging/rtl8712/rtl871x_sta_mgt.c
drivers/staging/tidspbridge/rmgr/drv_interface.c
drivers/staging/zcache/zcache-main.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When this driver was upgraded to the vendor 20100831 version in
commit 93c55dda09 et al,, one listhead initialization was missed.
This broke complete operation of the driver whenever AP mode was
enabled. This fixes https://bugs.archlinux.org/task/27996.
The configuration parameter R8712_AP is misleading as the driver cannot
function as an AP without a heavily hacked version of hostapd. Thus, it
makes sense to remove the parameter; however the code and data configured
for the option is left in.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I am preparing to convert this driver from semaphore to mutex locking,
The first step has been to eliminate a number of semaphores that were
initialized but never used, and one whose only use was a single "up"
after initialization. A total of 9 semaphores were removed in this process.
One other change was to remove some inline semaphore routines that were
unused.
In addition, several cases had the following structure:
down()
if () {
...
}
up()
The locking overhead was reduced by moving the up/down inside the if
block.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In https://bugs.archlinux.org/task/27996, failure of driver r8712u is
reported, with a timeout during module loading due to synchronous loading
of the firmware. The code now uses request_firmware_nowait().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When this driver was upgraded to the vendor 20100831 version in
commit 93c55dda09 et al,, one listhead initialization was missed.
This broke complete operation of the driver whenever AP mode was
enabled.
This patch fixes https://bugs.archlinux.org/task/27996.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.stable.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (466 commits)
net/hyperv: Add support for jumbo frame up to 64KB
net/hyperv: Add NETVSP protocol version negotiation
net/hyperv: Remove unnecessary kmap_atomic in netvsc driver
staging/rtl8192e: Register against lib80211
staging/rtl8192e: Convert to lib80211_crypt_info
staging/rtl8192e: Convert to lib80211_crypt_data and lib80211_crypt_ops
staging/rtl8192e: Add lib80211.h to rtllib.h
staging/mei: add watchdog device registration wrappers
drm/omap: GEM, deal with cache
staging: vt6656: int.c, int.h: Change return of function to void
staging: usbip: removed unused definitions from header
staging: usbip: removed dead code from receive function
staging:iio: Drop {mark,unmark}_in_use callbacks
staging:iio: Drop buffer mark_param_change callback
staging:iio: Drop the unused buffer enable() and is_enabled() callbacks
staging:iio: Drop buffer busy flag
staging:iio: Make sure a device is only opened once at a time
staging:iio: Disallow modifying buffer size when buffer is enabled
staging:iio: Disallow changing scan elements in all buffered modes
staging:iio: Use iio_buffer_enabled instead of open coding it
...
Fix up conflict in drivers/staging/iio/adc/ad799x_core.c (removal of
module_init due to using module_i2c_driver() helper, next to removal of
MODULE_ALIAS due to using MODULE_DEVICE_TABLE instead).
Add USB ID for Sitecom WLA-2000 v1.001 WLAN.
Reported-and-tested-by: Roland Gruber <post@rolandgruber.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If ibss_wlan is NULL, it is not correct to memcpy into its field.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
expression E, E1;
identifier f;
statement S1,S2,S3;
@@
if (E == NULL)
{
... when != if (E == NULL || ...) S1 else S2
when != E = E1
*E->f
... when any
return ...;
}
else S3
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Array XGrpKey has only 2 elements and uses (keyid - 1) as the index, which
allows the possibility of memory corruption from an out-of-bounds index.
This problem was reported by a new version of smatch.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ioctl handlers were frequently returning -1 upon failure. Most of
these have now been changed to proper errno macros.
The few remaining ones have been left untouched because either the
handler is not called (and so cannot be tested), or the function never
fails (and so cannot be system-tested), or requires new code to
distinguish its failures.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The frame buffers allocated in _r8712_init_recv_priv() are not tracked
by kmemleak, but they are freed when the driver is unloaded. To help
find any real leaks, these false positives are annotated for kmemleak.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tx Aggregation (CONFIG_R8712_TX_AGGR, known as CONFIG_USB_TX_AGGR in the
Realtek tarball) is now added.
However, its tests have not been successful! The default in the Realtek
tarball is to not build it -- and the Release Notes does not seem to list this
as a feature. I have tested the driver with and without this feature; the
former does not successfully associate when WPA2 is used.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In r8712_generate_ie(), HT check is no longer done.
Removed r8712_add_ht_addt_info().
Changes to defragmentation handling, and queue selection.
Get TSSI command.
Added an Ad-Hoc check to is_desired_network()
r8712_ind_disconnect() now checks for Linked state.
r8712_xmit_bh() now schedules an xmit tasklet.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
passive_mode added to private ioctls.
New private ioctls added for RSSI, link speed, mac address, scan type,
and DCE-D.
In r8711_wx_get_scan(), we now sleep only 100 times, instead of 1000.
In r8711_wx_set_essid(), added a check for Ad-Hoc state.
In r8711_wx_get_rate(), added a check for RTL8712_RF_2T2R RF type.
Added Set chplan.
In r871x_get_wireless_stats(), updated the mechanism for displaying
link quality.
Added SetDIG and SetRA commands.
r8712_joinbss_cmd() no longer checks for Ad-Hoc mode.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed unnecessary casts in kfree calls.
A few new types, defines and prototypes.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In transmit path, r8712_free_xmitframe(), the pkt pointer is now
NULLed _within_ the spin lock.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rework efuse data handling.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Refactor the TX code to prepare for aggregation.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
translate_scan() now uses the stack for some variables, instead of mallocing.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
stop_drv_timers() is now done in r871xu_dev_remove(), not netdev_close().
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The call to oid_rt_pro_set_power_tracking_hdl() is no longer available.
The function's definition remains, though it is currently unused.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
recv_frame.mem
mp_xmit_frame.mem
mp_xmit_packet.mem were not used, and so are now removed.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These are the new include directives for header files.
The following were (somehow!) not explicity in Realtek's, but proved necessary:
"linux/usb.h" is needed for usb_alloc_urb();
"linux/interrupt.h" is needed for tasklet_struct. It was often a nested
include.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed the redundant NULL check in LedControl871x.
As noted by Dan Carpenter, the address of a stack variable is never NULL.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
MSECS was never used in this driver. So removed.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Only copyright banners have been added to these files. No functional changes.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
daemonize() is only needed when a user-space task does kernel_thread().
r8712_cmd_thread() is kthread_create()'ed and thus it doesn't need
the soon-to-be-deprecated daemonize(). It is the only caller of
thread_enter() which actually does the call.
Note:
- we are going to remove the sigdelset(blocked) code from
allow_signal(), this means that without this patch
thread_enter() can't work after that. Not to mention
daemonize() should be deprecated.
- as a side effect, this patch changes ->comm. Hopefully
this is fine, and padapter->pnetdev->name probably makes
more sense anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-and-tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There were some curly braces missing so the original code in
wpa_supplicant_ioctl() pretty much always returned -EFAULT without
doing anything.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger's copyright addendum has now been included in the
banners.
The files involved in this commit have had only their banners
changed; there have been no other mods.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The only changes to these files have been the addition of only copyright
banners.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
padapter->bup is True when the interface has been
brought Up. But it was not being reset when the
interface is taken Down.
This has not caused a known problem, as other
state variables may be compensating for it. Never
the less, it is now properly tracked.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The original Realtek code assumed that ioctl Sets get done after the
interface is Up. This included the set to Essid and to the AP MAC#;
and it fit Realtek's installation procedure. But there is no such
necessity for the adapter, and no stated requirement found
elsewhere. Also, wireless drivers typically permit this.
A typical error message used to be:
Error for wireless request "Set ESSID" (8B1A) :
SET failed on device wlan0 ; Operation not permitted.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (741 commits)
staging:iio:meter:ade7753 should be 16 bit read not 8 bit for mode register.
staging:iio:kfifo_buf fix double initialization of the ring device structure.
staging:iio:accel:lis3l02dq: fix incorrect pointer passed to spi_set_drvdata.
staging:iio:imu fix missing register table index for some channels
spectra: enable device before poking it
staging: rts_pstor: Fix a miswriting
staging/lirc_bt829: Return -ENODEV when no hardware is found.
staging/lirc_parallel: remove pointless prototypes.
staging/lirc_parallel: fix panic on rmmod
staging:iio:adc:ad7476: Incorrect pointer into spi_set_drvdata.
Staging: zram: Fix kunmapping order
Revert "gma500: Fix dependencies"
gma500: Add medfield header
gma500: wire up the mrst i2c bus from chip_info
gma500: Fix DPU build
gma500: Clean up the DPU config and make it runtime
gma500: resync with Medfield progress
gma500: Use the mrst helpers and power control for mode commit
gma500@ Fix backlight range error
gma500: More Moorestown muddle meddling means MM maybe might modeset
...
Fix up fairly trivial conflicts all over, mostly due to header file
cleanup conflicts, but some deleted files and some just context changes:
- Documentation/feature-removal-schedule.txt
- drivers/staging/bcm/headers.h
- drivers/staging/brcm80211/brcmfmac/dhd_linux.c
- drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
- drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
- drivers/staging/brcm80211/brcmfmac/wl_iw.c
- drivers/staging/et131x/et131x_netdev.c
- drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
- drivers/staging/rtl8192e/r8192E.h
- drivers/staging/usbip/userspace/src/utils.h
It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/staging/rtl8187se/,
drivers/staging/rtl8192e/, drivers/staging/rtl8192u/ &
drivers/staging/rtl8712/.
This patch removes them.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
According to scripts/checkpatch.pl, the __packed macro
from linux/compiler.h should be used.
Signed-off-by: Michael Fiedler <michael.fiedler@informatik.stud.uni-erlangen.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is already a macro defined in linux/compiler.h.
Signed-off-by: Michael Fiedler <michael.fiedler@informatik.stud.uni-erlangen.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger
Martin Krause
Greg Kroah-Hartman
Linus Torvalds
Julia Lawall
Stephen Rothwell
Ali Bahar
Oleg Nesterov
Dan Carpenter
Jesper Juhl
Michael Fiedler