Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
Here is the large set of driver changes for char/misc drivers and other
smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem seems
under very active development recently. This required also merging
in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/inQw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yksvwCeOvU//SPwrbIpaeHAmHUv0PSVOrwAoKmt4ICh
hQUudlztfkvUJxKIH0gh
=Sjk4
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the
shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...
Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/itAw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykJbQCfWv/J4ZElO108iHBU5mJCDagUDBgAnAtLLN6A
SEAnnokGCDtA/BNIXeES
=luRi
-----END PGP SIGNATURE-----
Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
tty: n_gsm: add keep alive support
serial: imx: remove a redundant check
dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
tty: n_gsm: add TIOCMIWAIT support
tty: n_gsm: add RING/CD control support
tty: n_gsm: mark unusable ioctl structure fields accordingly
serial: imx: get rid of registers shadowing
serial: imx: refine local variables in rxint()
serial: imx: stop using USR2 in FIFO reading loop
serial: imx: remove redundant USR2 read from FIFO reading loop
serial: imx: do not break from FIFO reading loop prematurely
serial: imx: do not sysrq broken chars
serial: imx: work-around for hardware RX flood
serial: imx: factor-out common code to imx_uart_soft_reset()
serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
tty: pcn_uart: fix memory leak with using debugfs_lookup()
...
- Change MFD support status from Supported to Maintained
- New Drivers
- Add support for the Intel Platform Management Component Interface (PMCI)
- Remove Drivers
- HTC PASIC3 LED/DS1WM
- Toshiba T7L66XB, TC6387XB and TC6393XB TMIO
- New Device Support
- Add support for N6000 Flash to Intel M10 BMC PMCI
- Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC
- New Functionality
- Provide Reset support to Syscon
- Fix-ups
- Explicitly provide missing include files
- Pass platform type data/info via the SPI/I2C/DT registration strategy
- Lots of DT documentation / adaptions
- Replace scnprintf() with preferred sysfs_emit()
- Remove unused / superfluous code
- Fix some trivial whitesspace / spelling / grammatical issues
- Replace pm_power_off with new and improved register_sys_off_handler() API
- Bug Fixes
- Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
- Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
- Refuse to build CS5535 on unsupported UML architectures
- Fix memory leaks in error return paths
- Prevent refcount leaks in error return paths
-----BEGIN PGP SIGNATURE-----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=f0fr
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Change MFD support status from Supported to Maintained
New Drivers:
- Add support for the Intel Platform Management Component Interface
(PMCI)
Removed Drivers:
- HTC PASIC3 LED/DS1WM
- Toshiba T7L66XB, TC6387XB and TC6393XB TMIO
New Device Support:
- Add support for N6000 Flash to Intel M10 BMC PMCI
- Add support for Lenovo Yoga Tab 3 to Intel CHTWC PMIC
New Functionality:
- Provide Reset support to Syscon
Fix-ups:
- Explicitly provide missing include files
- Pass platform type data/info via the SPI/I2C/DT registration
strategy
- Lots of DT documentation / adaptions
- Replace scnprintf() with preferred sysfs_emit()
- Remove unused / superfluous code
- Fix some trivial whitesspace / spelling / grammatical issues
- Replace pm_power_off with new and improved
register_sys_off_handler() API
Bug Fixes:
- Reintroduce RK808-clkout registration - fixing Wi-Fi and Bluetooth
- Repair the order of AXPxxx IRQ PEK RISE/FALL definitions
- Refuse to build CS5535 on unsupported UML architectures
- Fix memory leaks in error return paths
- Prevent refcount leaks in error return paths"
* tag 'mfd-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (40 commits)
dt-bindings: mfd: qcom,tcsr: Add compatible for IPQ5332
dt-bindings: mfd: Add NXP BBNSM
mfd: ntxec: Add version number for EC in Tolino Vision
dt-bindings: mfd: syscon: Add mt8365-syscfg
mfd: Remove toshiba tmio drivers
mfd: arizona: Use pm_runtime_resume_and_get() to prevent refcnt leak
mfd: syscon: Allow reset control for syscon devices
dt-bindings: mfd/syscon: Add resets property
dt-bindings: mfd: syscon: Add amd,pensando-elba-syscon compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8226
mfd: simple-mfd-i2c: Fix incoherent comment regarding DT registration
mfd: axp20x: Switch to the sys-off handler API
mfd: core: Spelling s/compement/complement/
mfd: max8925: Remove the unused function irq_to_max8925()
mfd: qcom-pm8xxx: Remove set but unused variable 'rev'
dt-bindings: mfd: syscon: Document GXP register compatible
mfd: twl4030-power: Drop empty platform remove function
mfd: twl: Fix TWL6032 phy vbus detection
mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
MAINTAINERS: Move MFD from a Supported to Maintaied state
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPgG/geHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGidAH/j0pUbmniNM3aft8
5O1XxltlOZgqxju8OQhkiuX9VnQuuSeTNhAuj6jfcQOLpXDvlKsVfrpBxEfXalML
yead9QAy/OT3hNGQxifMQzGbsmaWH1kgxxnv2lKo2eNP5KYZ+rec+IgtQhgX9quN
q/N/ymd2/ju9AEOVRYwG1PD1EiIwTd3xPfBZl4Z35J+Ym+6NRrlXmN6J9LwslXmJ
/P4cwgdf9/TuYAB96EshRHsZ4Tk/Gxkn15uyhLaWBmrZ/LAF5JGbClEfFlCWgjwv
F5SGv3F+O6HSv49W9a24XtenE+3tw78AbCdqKZyzbb2whhv1eY99vKSbGnCahc/y
O0VBP/g=
=YoPk
-----END PGP SIGNATURE-----
Merge 6.2-rc7 into char-misc-next
We need the char-misc driver fixes in here as other patches depend on
them.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for PMCI-based flash access path and N6000 sec update
support. Access to flash staging area is different for N6000 from that
of the SPI interfaced counterparts.
Introduce intel_m10bmc_flash_bulk_ops to allow interface specific
differentiations for the flash access path for sec update and make
m10bmc_sec_read/write() in sec update driver to use the new operations.
The .flash_mutex serializes read/read. Flash update (erase+write) must
use ->lock/unlock_write() to prevent reads during update (reads would
timeout on setting flash MUX as BMC will prevent it).
Create a type specific RSU status reg handler for N6000 because the
field has moved from doorbell to auth result register.
If a failure is detected while altering the flash MUX, it seems safer
to try to set it back and doesn't seem harmful. Likely there are enough
troubles in that case anyway so setting it back fails too (which is
harmless sans the small extra delay) or just confirms that the value
wasn't changed.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-12-ilpo.jarvinen@linux.intel.com
-----BEGIN PGP SIGNATURE-----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=1t5R
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCY9VO1RMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIzae+MBAIaU4N8VQ3h3DlmnGy97G6uDyZlfAd2M
9Y9YH9e4se4GAP40PBAkqtwBpyD8qoqHeVHsF5hRHSgZkTs89QGSKICSBg==
=bcXZ
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-fpga-hwmon-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into for-fpga-v6.3-rc1
Lee writes:
Immutable branch between MFD, FPGA and HWMON due for the v6.3 merge window
* tag 'ib-mfd-fpga-hwmon-v6.3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: intel-m10-bmc: Add PMCI driver
fpga: m10bmc-sec: Make rsu status type specific
fpga: m10bmc-sec: Create helpers for rsu status/progress checks
mfd: intel-m10-bmc: Prefix register defines with M10BMC_N3000
fpga: intel-m10-bmc: Rework flash read/write
mfd: intel-m10-bmc: Support multiple CSR register layouts
mfd: intel-m10-bmc: Split into core and spi specific parts
mfd: intel-m10-bmc: Rename the local variables
mfd: intel-m10-bmc: Create m10bmc_platform_info for type specific info
mfd: intel-m10-bmc: Add missing includes to header
This patch changes the show() method of the "state" sysfs attribute to
propagate errors returned by the enable_show() op. In this way,
userspace can distinguish between when the bridge is actually "enabled"
(i.e., allowing signals) or "disabled" (i.e., gating signals), or when
there is an error.
Currently, enable_show() returns an integer representing the bridge's
state (enabled or disabled) or an error code. However, this integer
value is interpreted in state_show() as a bool, resulting in the method
printing "enabled" (i.e., the bridge allows signals to pass), without
propagating the error, even when enable_show() returns an error code.
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230125140622.176870-1-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Fix more kernel-doc warnings in drivers/fpga/:
$ ./scripts/kernel-doc -none drivers/fpga/*
drivers/fpga/dfl-afu.h:61: warning: expecting prototype for struct fpga_afu_dma_region. Prototype was for struct dfl_afu_dma_region instead
drivers/fpga/dfl-afu-region.c:52: warning: Function parameter or member 'pdata' not described in 'afu_mmio_region_add'
drivers/fpga/dfl-fme-perf.c:161: warning: Function parameter or member 'node' not described in 'fme_perf_priv'
drivers/fpga/dfl-fme-pr.h:70: warning: expecting prototype for struct dfl_fme_bridge_pdata. Prototype was for struct dfl_fme_br_pdata instead
drivers/fpga/dfl.h:256: warning: Function parameter or member 'revision' not described in 'dfl_feature'
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230114155444.794712-1-yilun.xu@intel.com
mpf_ops_write() function writes bitstream data to the FPGA by a smaller
frames. Introduce mpf_spi_frame_write() function which is for writing a
single data frame and use it in mpf_ops_write().
No functional changes intended.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221230092922.18822-4-i.bornyakov@metrotek.ru
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Original busy loop with retries count in mpf_poll_status() is not too
reliable, as it takes different times on different systems. Replace it
with read_poll_timeout() macro.
While at it, fix polling stop condition to met function's original
intention declared in the comment. The issue with original polling stop
condition is that it stops if any of mask bits is set, while intention
was to stop if all mask bits is set. This was not noticible because only
MPF_STATUS_READY is passed as mask argument and it is BIT(1).
Fixes: 5f8d4a9008 ("fpga: microchip-spi: add Microchip MPF FPGA manager")
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221230092922.18822-3-i.bornyakov@metrotek.ru
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
As spi-summary doc says:
> I/O buffers use the usual Linux rules, and must be DMA-safe.
> You'd normally allocate them from the heap or free page pool.
> Don't use the stack, or anything that's declared "static".
Replace spi_write() with spi_write_then_read(), which is dma-safe for
on-stack buffers. Use cacheline aligned buffers for transfers used in
spi_sync_transfer().
Although everything works OK with stack-located I/O buffers, better
follow the doc to be safe.
Fixes: 5f8d4a9008 ("fpga: microchip-spi: add Microchip MPF FPGA manager")
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221230092922.18822-2-i.bornyakov@metrotek.ru
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rsu status field moves from the doorbell register to the auth
result register in the PMCI implementation of the MAX10 BMC. In order
to prepare for that, refactor the sec update driver code to have a type
specific ops that provides ->rsu_status().
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-10-ilpo.jarvinen@linux.intel.com
RSU_STAT_* and RSU_PROG_* checks are done in more than one place in the sec
update code. Move the checks into new helper functions.
No function changes intended.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-9-ilpo.jarvinen@linux.intel.com
Access to flash staging area is different for N6000 from that of the
SPI interfaced counterparts. To make it easier to differentiate flash
access path, move read/write into new functions where the new access
path can be easily placed into. Rework the unaligned access such the
behavior it matches for both read and write.
This change also renames m10bmc_sec_write() to m10bmc_sec_fw_write() as
it would have a name conflict otherwise.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Co-developed-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-7-ilpo.jarvinen@linux.intel.com
There are different addresses for the MAX10 CSR registers. Introducing
a new data structure m10bmc_csr_map for the register definition of
MAX10 CSR.
Provide the csr_map for SPI.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Reviewed-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-6-ilpo.jarvinen@linux.intel.com
Split the common code from intel-m10-bmc driver into intel-m10-bmc-core
and move the SPI bus parts into an interface specific file.
intel-m10-bmc-core becomes the core MFD functions which can support
multiple bus interface like SPI bus.
Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Reviewed-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net> # hwmon
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230116100845.6153-5-ilpo.jarvinen@linux.intel.com
Version 1 of the Device Feature Header (DFH) definition adds
functionality to the Device Feature List (DFL) bus.
A DFHv1 header may have one or more parameter blocks that
further describes the HW to SW. Add support to the DFL bus
to parse the MSI-X parameter.
The location of a feature's register set is explicitly
described in DFHv1 and can be relative to the base of the DFHv1
or an absolute address. Parse the location and pass the information
to DFL driver.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230115151447.1353428-4-matthew.gerlach@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the definitions for DFHv1 header and related register
bitfields.
Signed-off-by: Basheer Ahmed Muddebihal <basheer.ahmed.muddebihal@linux.intel.com>
Co-developed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230115151447.1353428-3-matthew.gerlach@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of error, the function stratix10_svc_allocate_memory()
returns ERR_PTR() and never returns NULL. The NULL test in the
return value check should be replaced with IS_ERR().
Fixes: e7eef1d763 ("fpga: add intel stratix10 soc fpga manager driver")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Russ Weight <russell.h.weight@intel.com>
Cc: stable@vger.kernel.org
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221126071430.19540-1-zhengyongjun3@huawei.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Here is the large set of char/misc and other driver subsystem changes
for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of new
driver development and minor fixes. Highlights include:
- fastrpc driver updates
- iio new drivers and updates
- habanalabs driver updates for new hardware and features
- slimbus driver updates
- speakup module parameters added to aid in boot time configuration
- i2c probe_new conversions for lots of different drivers
- other small driver fixes and additions
One semi-interesting change in here is the increase of the number of
misc dynamic minors available to 1048448 to handle new huge-cpu systems.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wrdw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykSDgCdHjUHS62/UnKdB9rLtyAOFxS/6DgAn2X4Unf8
RN8Mn2mUIiBzyu5p+Zc7
=tK3S
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc and other driver subsystem changes
for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of
new driver development and minor fixes.
Highlights include:
- fastrpc driver updates
- iio new drivers and updates
- habanalabs driver updates for new hardware and features
- slimbus driver updates
- speakup module parameters added to aid in boot time configuration
- i2c probe_new conversions for lots of different drivers
- other small driver fixes and additions
One semi-interesting change in here is the increase of the number of
misc dynamic minors available to 1048448 to handle new huge-cpu
systems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits)
extcon: usbc-tusb320: Convert to i2c's .probe_new()
extcon: rt8973: Convert to i2c's .probe_new()
extcon: fsa9480: Convert to i2c's .probe_new()
extcon: max77843: Replace irqchip mask_invert with unmask_base
chardev: fix error handling in cdev_device_add()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
drivers: mcb: fix resource leak in mcb_probe()
coresight: etm4x: fix repeated words in comments
coresight: cti: Fix null pointer error on CTI init before ETM
coresight: trbe: remove cpuhp instance node before remove cpuhp state
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
misc: fastrpc: Add dma_mask to fastrpc_channel_ctx
misc: fastrpc: Add mmap request assigning for static PD pool
misc: fastrpc: Safekeep mmaps on interrupted invoke
misc: fastrpc: Add support for audiopd
misc: fastrpc: Rework fastrpc_req_munmap
misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail
misc: fastrpc: Add fastrpc_remote_heap_alloc
misc: fastrpc: Add reserved mem support
misc: fastrpc: Rename audio protection domain to root
...
The secure update driver depends on the firmware-upload functionality of
the firmware-loader. The firmware-loader is carried in the firmware-class
driver which is enabled with the tristate CONFIG_FW_LOADER option. The
firmware-upload functionality is included in the firmware-class driver if
the bool FW_UPLOAD config is set.
The current dependency statement, "depends on FW_UPLOAD", is not adequate
because it does not implicitly turn on FW_LOADER. Instead of adding a
dependency, follow the convention used by drivers that require the
FW_LOADER_USER_HELPER functionality of the firmware-loader by using
select for both FW_LOADER and FW_UPLOAD.
Fixes: bdf86d0e6c ("fpga: m10bmc-sec: create max10 bmc secure update")
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221115001127.289890-1-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Add support to the FPGA manager for programming Lattice ECP5 FPGA over
slave SPI sysCONFIG interface.
sysCONFIG interface core functionality is separate from both ECP5 and
SPI specifics, so support for other FPGAs with different port types can
be added in the future.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221025053947.2737-2-i.bornyakov@metrotek.ru
[yilun.xu@intel.com: remove redundant blank line after kmemdup]
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20220926141729.2292311-1-yangyingliang@huawei.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and features,
the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
5G/JQ+rpcclr7VOXlS66
=zVkU
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
There is an error check following the allocation of flash_buf that returns
without freeing flash_buf. It makes more sense to do the error check
before the allocation and the reordering eliminates the memory leak.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 154afa5c31 ("fpga: m10bmc-sec: expose max10 flash update count")
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220916235205.106873-1-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Add a driver name for the D5005 BMC secure update driver. Different
driver names are used for the N3000 and D5005 devices because future
changes will add conditional code based on the device type (N3000
vs D5005). This change enables D5005 secure updates of BCM images,
BMC firmware, static-region images, etc.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20220902165706.518074-3-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
The "hdr.count * sizeof(s32)" multiplication can overflow on 32 bit
systems leading to memory corruption. Use array_size() to fix that.
Fixes: 322b598be4 ("fpga: dfl: introduce interrupt trigger setting API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/YxBAtYCM38dM7yzI@kili
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
There is an spelling mistake in a dev_err message. Fix it.
Fixes: 3cc624beba ("fpga: fpga-mgr: support bitstream offset in image buffer")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220624081409.14760-1-colin.i.king@gmail.com
[yilun.xu@intel.com: add the Fixes tag]
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
At the moment FPGA manager core loads to the device entire image
provided to fpga_mgr_load(). But it is not always whole FPGA image
buffer meant to be written to the device. In particular, .dat formatted
image for Microchip MPF contains meta info in the header that is not
meant to be written to the device. This is issue for those low level
drivers that loads data to the device with write() fpga_manager_ops
callback, since write() can be called in iterator over scatter-gather
table, not only linear image buffer. On the other hand, write_sg()
callback is provided with whole image in scatter-gather form and can
decide itself which part should be sent to the device.
Add header_size and data_size to the fpga_image_info struct, add
skip_header to the fpga_manager_ops struct and adjust fpga_mgr_write()
callers with respect to them.
* info->header_size indicates part at the beginning of image buffer
that contains some meta info. It is optional and can be 0,
initialized with mops->initial_header_size.
* mops->skip_header tells fpga-mgr core whether write should start
from the beginning of image buffer or at the offset of header_size.
* info->data_size is the size of bitstream data that is meant to be
written to the device. It is also optional and can be 0, which
means bitstream data is up to the end of image buffer.
Also add parse_header() callback to fpga_manager_ops, which purpose is
to set info->header_size and info->data_size. At least
initial_header_size bytes of image buffer will be passed into
parse_header() first time. If it is not enough, parse_header() should
set desired size into info->header_size and return -EAGAIN, then it will
be called again with greater part of image buffer on the input.
Suggested-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20220623163248.3672-2-i.bornyakov@metrotek.ru
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Fix the "comparison with less than zero" warning reported by
cppcheck for the unsigned (size_t) parameter count of the
alt_pr_fpga_write() function.
Fixes: d201cc17a8 ("fpga pr ip: Core driver support for Altera Partial Reconfiguration IP")
Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Link: https://lore.kernel.org/r/20220609140520.42662-1-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Create firmware upload ops and call the Firmware Upload support of the
Firmware Loader subsystem to enable FPGA image uploads for secure
updates of BMC images, FPGA images, etc.
Tested-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220606160038.846236-6-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Extend the MAX10 BMC Secure Update driver to provide sysfs files to
expose the 128 bit code signing key (CSK) cancellation vectors. These use
the standard bitmap list format (e.g. 1,2-6,9).
Each CSK is assigned an ID, a number between 0-127, during the signing
process. CSK ID cancellation information is stored in 128-bit fields in
write-once locations in flash. The cancellation of a CSK can be used
to prevent the card from being rolled back to older images that were
signed with a CSK that is now cancelled.
Reviewed-by: Tom Rix <trix@redhat.com>
Tested-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220606160038.846236-5-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Create a sub-driver for the FPGA Card BMC in order to support secure
updates. This patch creates the Max10 BMC Secure Update driver and
provides sysfs files for displaying the root entry hashes (REH) for the
FPGA static region (SR), the FPGA Partial Reconfiguration (PR) region,
and the card BMC.
The Intel MAX10 BMC Root of Trust (RoT) requires that all BMC Nios firmware
and FPGA images are authenticated using ECDSA before loading and executing
on the card. Code Signing Keys (CSK) are used to sign images. CSKs are
signed by a root key. The root entry hash is created from the root public
key.
The RoT provides authentication by storing an REH bitstream to a write-once
location. Image signatures are verified against the hash.
Reviewed-by: Tom Rix <trix@redhat.com>
Tested-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220606160038.846236-3-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Currently we use PORTn_OFFSET to locate PORT DFLs, and PORT DFLs are not
connected FME DFL. But for some cases (e.g. Intel Open FPGA Stack device),
PORT DFLs are connected to FME DFL directly, so we don't need to search
PORT DFLs via PORTn_OFFSET again. If BAR value of PORTn_OFFSET is 0x7
(FME_PORT_OFST_BAR_SKIP) then driver will skip searching the DFL for that
port. If BAR value is invalid, return -EINVAL.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Link: https://lore.kernel.org/r/20220505100617.703672-1-tianfei.zhang@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Previously the feature IDs defined are unique, no matter
which feature type. But currently we want to extend its
usage to have a per-type feature ID space, so this patch
adds feature type checking as well just before look into
feature ID for different features which have irq info.
Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20220419032942.427429-2-tianfei.zhang@intel.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
To fix below kernel-doc warnings this patch does the following
->Replaced Return\Returns with 'Return:' keyword.
->Added 'Return' description For __init of_fpga_region_init()' API.
->Added description for 'child_regions_with_firmware()' API.
warning: No description found for return value of
'of_fpga_region_find'.
warning: No description found for return value of
'of_fpga_region_get_bridges'.
warning: missing initial short description on line:
* child_regions_with_firmware
warning: No description found for return value of
'child_regions_with_firmware'.
warning: No description found for return value of
'of_fpga_region_notify_pre_apply'.
warning: No description found for return value of
'of_fpga_region_notify'.
warning: No description found for return value of
'of_fpga_region_init'.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Link: https://lore.kernel.org/r/20220423170235.2115479-6-nava.manne@xilinx.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
In FPGA Makefile has both space and tab indentation, to
make them align use tab instead of space indentation.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Link: https://lore.kernel.org/r/20220423170235.2115479-5-nava.manne@xilinx.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
warnings: No description found for return value of 'xxx'
In-order to fix the above kernel-doc warnings added the
'Return' description for 'devm_fpga_mgr_register_full()'
and 'devm_fpga_mgr_register()' APIs.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Link: https://lore.kernel.org/r/20220423170235.2115479-4-nava.manne@xilinx.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
fixes the below checks reported by checkpatch.pl:
- Lines should not end with a '('
- Alignment should match open parenthesis
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Link: https://lore.kernel.org/r/20220423170235.2115479-3-nava.manne@xilinx.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.
Some reasons why this API should be removed have been given by Julia
Lawall in [2].
A coccinelle script has been used to perform the needed transformation.
It can be found in [3].
It has been hand modified to use 'dma_set_mask_and_coherent()' instead of
'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable.
This is less verbose.
The explicit 'ret = -EIO;' has been removed because
'dma_set_mask_and_coherent()' returns 0 or -EIO, so its return code can be
used directly.
[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/
[3]: https://lore.kernel.org/kernel-janitors/20200716192821.321233-1-christophe.jaillet@wanadoo.fr/
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Linus Torvalds
Greg Kroah-Hartman
Ilpo Järvinen
Xu Yilun
Marco Pagani
Randy Dunlap
Ivan Bornyakov
Matthew Gerlach
Basheer Ahmed Muddebihal
Zheng Yongjun
Russ Weight
Yang Yingliang
Dan Carpenter
Conor Dooley
Colin Ian King
keliu
Tianfei zhang
Nava kishore Manne
Christophe JAILLET