Pass @opaque to kvm_arch_hardware_setup() and
kvm_arch_check_processor_compat() to allow architecture specific code to
reference @opaque without having to stash it away in a temporary global
variable. This will enable x86 to separate its vendor specific callback
ops, which are passed via @opaque, into "init" and "runtime" ops without
having to stash away the "init" ops.
No functional change intended.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Cornelia Huck <cohuck@redhat.com> #s390
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reset the LRU slot if it becomes invalid when deleting a memslot to fix
an out-of-bounds/use-after-free access when searching through memslots.
Explicitly check for there being no used slots in search_memslots(), and
in the caller of s390's approximation variant.
Fixes: 36947254e5 ("KVM: Dynamically size memslot array based on number of used slots")
Reported-by: Qian Cai <cai@lca.pw>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320205546.2396-2-sean.j.christopherson@intel.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The vgic-state debugfs file could do with showing the pending state
of the HW-backed SGIs. Plug it into the low-level code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-24-maz@kernel.org
Each time a Group-enable bit gets flipped, the state of these bits
needs to be forwarded to the hardware. This is a pretty heavy
handed operation, requiring all vcpus to reload their GICv4
configuration. It is thus implemented as a new request type.
These enable bits are programmed into the HW by setting the VGrp{0,1}En
fields of GICR_VPENDBASER when the vPEs are made resident again.
Of course, we only support Group-1 for now...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-22-maz@kernel.org
The GICv4.1 architecture gives the hypervisor the option to let
the guest choose whether it wants the good old SGIs with an
active state, or the new, HW-based ones that do not have one.
For this, plumb the configuration of SGIs into the GICv3 MMIO
handling, present the GICD_TYPER2.nASSGIcap to the guest,
and handle the GICD_CTLR.nASSGIreq setting.
In order to be able to deal with the restore of a guest, also
apply the GICD_CTLR.nASSGIreq setting at first run so that we
can move the restored SGIs to the HW if that's what the guest
had selected in a previous life.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-21-maz@kernel.org
In order to let a guest buy in the new, active-less SGIs, we
need to be able to switch between the two modes.
Handle this by stopping all guest activity, transfer the state
from one mode to the other, and resume the guest. Nothing calls
this code so far, but a later patch will plug it into the MMIO
emulation.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-20-maz@kernel.org
Most of the GICv3 emulation code that deals with SGIs now has to be
aware of the v4.1 capabilities in order to benefit from it.
Add such support, keyed on the interrupt having the hw flag set and
being a SGI.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-19-maz@kernel.org
As GICv4.1 understands the life cycle of doorbells (instead of
just randomly firing them at the most inconvenient time), just
enable them at irq_request time, and be done with it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-18-maz@kernel.org
In order to hide some of the differences between v4.0 and v4.1, move
the doorbell management out of the KVM code, and into the GICv4-specific
layer. This allows the calling code to ask for the doorbell when blocking,
and otherwise to leave the doorbell permanently disabled.
This matches the v4.1 code perfectly, and only results in a minor
refactoring of the v4.0 code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-14-maz@kernel.org
Drop largepages_enabled, kvm_largepages_enabled() and
kvm_disable_largepages() now that all users are gone.
Note, largepages_enabled was an x86-only flag that got left in common
KVM code when KVM gained support for multiple architectures.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It could take kvm->mmu_lock for an extended period of time when
enabling dirty log for the first time. The main cost is to clear
all the D-bits of last level SPTEs. This situation can benefit from
manual dirty log protect as well, which can reduce the mmu_lock
time taken. The sequence is like this:
1. Initialize all the bits of the dirty bitmap to 1 when enabling
dirty log for the first time
2. Only write protect the huge pages
3. KVM_GET_DIRTY_LOG returns the dirty bitmap info
4. KVM_CLEAR_DIRTY_LOG will clear D-bit for each of the leaf level
SPTEs gradually in small chunks
Under the Intel(R) Xeon(R) Gold 6152 CPU @ 2.10GHz environment,
I did some tests with a 128G windows VM and counted the time taken
of memory_global_dirty_log_start, here is the numbers:
VM Size Before After optimization
128G 460ms 10ms
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove includes of asm/kvm_host.h from files that already include
linux/kvm_host.h to make it more obvious that there is no ordering issue
between the two headers. linux/kvm_host.h includes asm/kvm_host.h to
pick up architecture specific settings, and this will never change, i.e.
including asm/kvm_host.h after linux/kvm_host.h may seem problematic,
but in practice is simply redundant.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the memslot logic doesn't assume memslots are always non-NULL,
dynamically size the array of memslots instead of unconditionally
allocating memory for the maximum number of memslots.
Note, because a to-be-deleted memslot must first be invalidated, the
array size cannot be immediately reduced when deleting a memslot.
However, consecutive deletions will realize the memory savings, i.e.
a second deletion will trim the entry.
Tested-by: Christoffer Dall <christoffer.dall@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor memslot handling to treat the number of used slots as the de
facto size of the memslot array, e.g. return NULL from id_to_memslot()
when an invalid index is provided instead of relying on npages==0 to
detect an invalid memslot. Rework the sorting and walking of memslots
in advance of dynamically sizing memslots to aid bisection and debug,
e.g. with luck, a bug in the refactoring will bisect here and/or hit a
WARN instead of randomly corrupting memory.
Alternatively, a global null/invalid memslot could be returned, i.e. so
callers of id_to_memslot() don't have to explicitly check for a NULL
memslot, but that approach runs the risk of introducing difficult-to-
debug issues, e.g. if the global null slot is modified. Constifying
the return from id_to_memslot() to combat such issues is possible, but
would require a massive refactoring of arch specific code and would
still be susceptible to casting shenanigans.
Add function comments to update_memslots() and search_memslots() to
explicitly (and loudly) state how memslots are sorted.
Opportunistically stuff @hva with a non-canonical value when deleting a
private memslot on x86 to detect bogus usage of the freed slot.
No functional change intended.
Tested-by: Christoffer Dall <christoffer.dall@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework kvm_get_dirty_log() so that it "returns" the associated memslot
on success. A future patch will rework memslot handling such that
id_to_memslot() can return NULL, returning the memslot makes it more
obvious that the validity of the memslot has been verified, i.e.
precludes the need to add validity checks in the arch code that are
technically unnecessary.
To maintain ordering in s390, move the call to kvm_arch_sync_dirty_log()
from s390's kvm_vm_ioctl_get_dirty_log() to the new kvm_get_dirty_log().
This is a nop for PPC, the only other arch that doesn't select
KVM_GENERIC_DIRTYLOG_READ_PROTECT, as its sync_dirty_log() is empty.
Ideally, moving the sync_dirty_log() call would be done in a separate
patch, but it can't be done in a follow-on patch because that would
temporarily break s390's ordering. Making the move in a preparatory
patch would be functionally correct, but would create an odd scenario
where the moved sync_dirty_log() would operate on a "different" memslot
due to consuming the result of a different id_to_memslot(). The
memslot couldn't actually be different as slots_lock is held, but the
code is confusing enough as it is, i.e. moving sync_dirty_log() in this
patch is the lesser of all evils.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the implementations of KVM_GET_DIRTY_LOG and KVM_CLEAR_DIRTY_LOG
for CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT into common KVM code.
The arch specific implemenations are extremely similar, differing
only in whether the dirty log needs to be sync'd from hardware (x86)
and how the TLBs are flushed. Add new arch hooks to handle sync
and TLB flush; the sync will also be used for non-generic dirty log
support in a future patch (s390).
The ulterior motive for providing a common implementation is to
eliminate the dependency between arch and common code with respect to
the memslot referenced by the dirty log, i.e. to make it obvious in the
code that the validity of the memslot is guaranteed, as a future patch
will rework memslot handling such that id_to_memslot() can return NULL.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up __kvm_set_memory_region() to achieve several goals:
- Remove local variables that serve no real purpose
- Improve the readability of the code
- Better show the relationship between the 'old' and 'new' memslot
- Prepare for dynamically sizing memslots
- Document subtle gotchas (via comments)
Note, using 'tmp' to hold the initial memslot is not strictly necessary
at this juncture, e.g. 'old' could be directly copied from
id_to_memslot(), but keep the pointer usage as id_to_memslot() will be
able to return a NULL pointer once memslots are dynamically sized.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all callers of kvm_free_memslot() pass NULL for @dont, remove
the param from the top-level routine and all arch's implementations.
No functional change intended.
Tested-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move memslot deletion into its own routine so that the success path for
other memslot updates does not need to use kvm_free_memslot(), i.e. can
explicitly destroy the dirty bitmap when necessary. This paves the way
for dropping @dont from kvm_free_memslot(), i.e. all callers now pass
NULL for @dont.
Add a comment above the code to make a copy of the existing memslot
prior to deletion, it is not at all obvious that the pointer will become
stale during sorting and/or installation of new memslots.
Note, kvm_arch_commit_memory_region() allows an architecture to free
resources when moving a memslot or changing its flags, e.g. x86 frees
its arch specific memslot metadata during commit_memory_region().
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Tested-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "const" attribute from @old in kvm_arch_commit_memory_region()
to allow arch specific code to free arch specific resources in the old
memslot without having to cast away the attribute. Freeing resources in
kvm_arch_commit_memory_region() paves the way for simplifying
kvm_free_memslot() by eliminating the last usage of its @dont param.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split out the core functionality of setting a memslot into a separate
helper in preparation for moving memslot deletion into its own routine.
Tested-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a big pile o' gotos with returns to make it more obvious what
error code is being returned, and to prepare for refactoring the
functional, i.e. post-checks, portion of __kvm_set_memory_region().
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly free an allocated-but-unused dirty bitmap instead of relying
on kvm_free_memslot() if an error occurs in __kvm_set_memory_region().
There is no longer a need to abuse kvm_free_memslot() to free arch
specific resources as arch specific code is now called only after the
common flow is guaranteed to succeed. Arch code can still fail, but
it's responsible for its own cleanup in that case.
Eliminating the error path's abuse of kvm_free_memslot() paves the way
for simplifying kvm_free_memslot(), i.e. dropping its @dont param.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_arch_create_memslot() now that all arch implementations are
effectively nops. Removing kvm_arch_create_memslot() eliminates the
possibility for arch specific code to allocate memory prior to setting
a memslot, which sets the stage for simplifying kvm_free_memslot().
Cc: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The two implementations of kvm_arch_create_memslot() in x86 and PPC are
both good citizens and free up all local resources if creation fails.
Return immediately (via a superfluous goto) instead of calling
kvm_free_memslot().
Note, the call to kvm_free_memslot() is effectively an expensive nop in
this case as there are no resources to be freed.
No functional change intended.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reinstall the old memslots if preparing the new memory region fails
after invalidating a to-be-{re}moved memslot.
Remove the superfluous 'old_memslots' variable so that it's somewhat
clear that the error handling path needs to free the unused memslots,
not simply the 'old' memslots.
Fixes: bc6678a33d ("KVM: introduce kvm->srcu and convert kvm_set_memory_region to SRCU update")
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the physical timer structure when reading the physical counter
instead of using the virtual timer structure. Thankfully, nothing is
accessing this code path yet (at least not until we enable save/restore
of the physical counter). It doesn't hurt for this to be correct though.
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
[maz: amended commit log]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Fixes: 84135d3d18 ("KVM: arm/arm64: consolidate arch timer trap handlers")
Link: https://lore.kernel.org/r/1584351546-5018-1-git-send-email-karahmed@amazon.de
- Fix compilation on 32bit
- Move VHE guest entry/exit into the VHE-specific entry code
- Make sure all functions called by the non-VHE HYP code is tagged as __always_inline
-----BEGIN PGP SIGNATURE-----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=NpPo
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.6, take #1
- Fix compilation on 32bit
- Move VHE guest entry/exit into the VHE-specific entry code
- Make sure all functions called by the non-VHE HYP code is tagged as __always_inline
With VHE, running a vCPU always requires the sequence:
1. kvm_arm_vhe_guest_enter();
2. kvm_vcpu_run_vhe();
3. kvm_arm_vhe_guest_exit()
... and as we invoke this from the shared arm/arm64 KVM code, 32-bit arm
has to provide stubs for all three functions.
To simplify the common code, and make it easier to make further
modifications to the arm64-specific portions in the near future, let's
fold kvm_arm_vhe_guest_enter() and kvm_arm_vhe_guest_exit() into
kvm_vcpu_run_vhe().
The 32-bit stubs for kvm_arm_vhe_guest_enter() and
kvm_arm_vhe_guest_exit() are removed, as they are no longer used. The
32-bit stub for kvm_vcpu_run_vhe() is left as-is.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200210114757.2889-1-mark.rutland@arm.com
Accessing a per-cpu variable only makes sense when preemption is
disabled (and the kernel does check this when the right debug options
are switched on).
For kvm_get_running_vcpu(), it is fine to return the value after
re-enabling preemption, as the preempt notifiers will make sure that
this is kept consistent across task migration (the comment above the
function hints at it, but lacks the crucial preemption management).
While we're at it, move the comment from the ARM code, which explains
why the whole thing works.
Fixes: 7495e22bb1 ("KVM: Move running VCPU from ARM to common code").
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/318984f6-bc36-33a3-abc6-bf2295974b06@huawei.com
Message-id: <20200207163410.31276-1-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fedora kernel builds on armv7hl began failing recently because
kvm_arm_exception_type and kvm_arm_exception_class were undeclared in
trace.h. Add the missing include.
Fixes: 0e20f5e255 ("KVM: arm/arm64: Cleanup MMIO handling")
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200205134146.82678-1-jcline@redhat.com
From Boris Ostrovsky:
The KVM hypervisor may provide a guest with ability to defer remote TLB
flush when the remote VCPU is not running. When this feature is used,
the TLB flush will happen only when the remote VPCU is scheduled to run
again. This will avoid unnecessary (and expensive) IPIs.
Under certain circumstances, when a guest initiates such deferred action,
the hypervisor may miss the request. It is also possible that the guest
may mistakenly assume that it has already marked remote VCPU as needing
a flush when in fact that request had already been processed by the
hypervisor. In both cases this will result in an invalid translation
being present in a vCPU, potentially allowing accesses to memory locations
in that guest's address space that should not be accessible.
Note that only intra-guest memory is vulnerable.
The five patches address both of these problems:
1. The first patch makes sure the hypervisor doesn't accidentally clear
a guest's remote flush request
2. The rest of the patches prevent the race between hypervisor
acknowledging a remote flush request and guest issuing a new one.
Conflicts:
arch/x86/kvm/x86.c [move from kvm_arch_vcpu_free to kvm_arch_vcpu_destroy]
__kvm_map_gfn()'s call to gfn_to_pfn_memslot() is
* relatively expensive
* in certain cases (such as when done from atomic context) cannot be called
Stashing gfn-to-pfn mapping should help with both cases.
This is part of CVE-2019-3016.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_vcpu_(un)map operates on gfns from any current address space.
In certain cases we want to make sure we are not mapping SMRAM
and for that we can use kvm_(un)map_gfn() that we are introducing
in this patch.
This is part of CVE-2019-3016.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the ARM ARM, registers CNT{P,V}_TVAL_EL0 have bits [63:32]
RES0 [1]. When reading the register, the value is truncated to the least
significant 32 bits [2], and on writes, TimerValue is treated as a signed
32-bit integer [1, 2].
When the guest behaves correctly and writes 32-bit values, treating TVAL
as an unsigned 64 bit register works as expected. However, things start
to break down when the guest writes larger values, because
(u64)0x1_ffff_ffff = 8589934591. but (s32)0x1_ffff_ffff = -1, and the
former will cause the timer interrupt to be asserted in the future, but
the latter will cause it to be asserted now. Let's treat TVAL as a
signed 32-bit register on writes, to match the behaviour described in
the architecture, and the behaviour experimentally exhibited by the
virtual timer on a non-vhe host.
[1] Arm DDI 0487E.a, section D13.8.18
[2] Arm DDI 0487E.a, section D11.2.4
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
[maz: replaced the read-side mask with lower_32_bits]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 8fa7616248 ("KVM: arm/arm64: arch_timer: Fix CNTP_TVAL calculation")
Link: https://lore.kernel.org/r/20200127103652.2326-1-alexandru.elisei@arm.com
Let the code never use unsupported event counters. Change
kvm_pmu_handle_pmcr() to only reset supported counters and
kvm_pmu_vcpu_reset() to only stop supported counters.
Other actions are filtered on the supported counters in
kvm/sysregs.c
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200124142535.29386-5-eric.auger@redhat.com
At the moment a SW_INCR counter always overflows on 32-bit
boundary, independently on whether the n+1th counter is
programmed as CHAIN.
Check whether the SW_INCR counter is a 64b counter and if so,
implement the 64b logic.
Fixes: 80f393a23b ("KVM: arm/arm64: Support chained PMU counters")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200124142535.29386-4-eric.auger@redhat.com
At the moment we update the chain bitmap on type setting. This
does not take into account the enable state of the odd register.
Let's make sure a counter is never considered as chained if
the high counter is disabled.
We recompute the chain state on enable/disable and type changes.
Also let create_perf_event() use the chain bitmap and not use
kvm_pmu_idx_has_chain_evtype().
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200124142535.29386-3-eric.auger@redhat.com
The specification says PMSWINC increments PMEVCNTR<n>_EL1 by 1
if PMEVCNTR<n>_EL0 is enabled and configured to count SW_INCR.
For PMEVCNTR<n>_EL0 to be enabled, we need both PMCNTENSET to
be set for the corresponding event counter but we also need
the PMCR.E bit to be set.
Fixes: 7a0adc7064 ("arm64: KVM: Add access handler for PMSWINC register")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200124142535.29386-2-eric.auger@redhat.com
Avoid the "writable" check in __gfn_to_hva_many(), which will always fail
on read-only memslots due to gfn_to_hva() assuming writes. Functionally,
this allows x86 to create large mappings for read-only memslots that
are backed by HugeTLB mappings.
Note, the changelog for commit 05da45583d ("KVM: MMU: large page
support") states "If the largepage contains write-protected pages, a
large pte is not used.", but "write-protected" refers to pages that are
temporarily read-only, e.g. read-only memslots didn't even exist at the
time.
Fixes: 4d8b81abc4 ("KVM: introduce readonly memslot")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Redone using kvm_vcpu_gfn_to_memslot_prot. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvm_vcpu_gfn_to_hva() when retrieving the host page size so that the
correct set of memslots is used when handling x86 page faults in SMM.
Fixes: 54bf36aac5 ("KVM: x86: use vcpu-specific functions to read/write/translate GFNs")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper, is_transparent_hugepage(), to explicitly check whether a
compound page is a THP and use it when populating KVM's secondary MMU.
The explicit check fixes a bug where a remapped compound page, e.g. for
an XDP Rx socket, is mapped into a KVM guest and is mistaken for a THP,
which results in KVM incorrectly creating a huge page in its secondary
MMU.
Fixes: 936a5fe6e6 ("thp: kvm mmu transparent hugepage support")
Reported-by: syzbot+c9d1fb51ac9d0d10c39d@syzkaller.appspotmail.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check the result of __kvm_gfn_to_hva_cache_init() and return immediately
instead of relying on the kvm_is_error_hva() check to detect errors so
that it's abundantly clear KVM intends to immediately bail on an error.
Note, the hva check is still mandatory to handle errors on subqeuesnt
calls with the same generation. Similarly, always return -EFAULT on
error so that multiple (bad) calls for a given generation will get the
same result, e.g. on an illegal gfn wrap, propagating the return from
__kvm_gfn_to_hva_cache_init() would cause the initial call to return
-EINVAL and subsequent calls to return -EFAULT.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Barret reported a (technically benign) bug where nr_pages_avail can be
accessed without being initialized if gfn_to_hva_many() fails.
virt/kvm/kvm_main.c:2193:13: warning: 'nr_pages_avail' may be
used uninitialized in this function [-Wmaybe-uninitialized]
Rather than simply squashing the warning by initializing nr_pages_avail,
fix the underlying issues by reworking __kvm_gfn_to_hva_cache_init() to
return immediately instead of continuing on. Now that all callers check
the result and/or bail immediately on a bad hva, there's no need to
explicitly nullify the memslot on error.
Reported-by: Barret Rhoden <brho@google.com>
Fixes: f1b9dd5eb8 ("kvm: Disallow wraparound in kvm_gfn_to_hva_cache_init")
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When reading/writing using the guest/host cache, check for a bad hva
before checking for a NULL memslot, which triggers the slow path for
handing cross-page accesses. Because the memslot is nullified on error
by __kvm_gfn_to_hva_cache_init(), if the bad hva is encountered after
crossing into a new page, then the kvm_{read,write}_guest() slow path
could potentially write/access the first chunk prior to detecting the
bad hva.
Arguably, performing a partial access is semantically correct from an
architectural perspective, but that behavior is certainly not intended.
In the original implementation, memslot was not explicitly nullified
and therefore the partial access behavior varied based on whether the
memslot itself was null, or if the hva was simply bad. The current
behavior was introduced as a seemingly unintentional side effect in
commit f1b9dd5eb8 ("kvm: Disallow wraparound in
kvm_gfn_to_hva_cache_init"), which justified the change with "since some
callers don't check the return code from this function, it sit seems
prudent to clear ghc->memslot in the event of an error".
Regardless of intent, the partial access is dependent on _not_ checking
the result of the cache initialization, which is arguably a bug in its
own right, at best simply weird.
Fixes: 8f964525a1 ("KVM: Allow cross page reads and writes from cached translations.")
Cc: Jim Mattson <jmattson@google.com>
Cc: Andrew Honig <ahonig@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For ring-based dirty log tracking, it will be more efficient to account
writes during schedule-out or schedule-in to the currently running VCPU.
We would like to do it even if the write doesn't use the current VCPU's
address space, as is the case for cached writes (see commit 4e335d9e7d,
"Revert "KVM: Support vCPU-based gfn->hva cache"", 2017-05-02).
Therefore, add a mechanism to track the currently-loaded kvm_vcpu struct.
There is already something similar in KVM/ARM; one important difference
is that kvm_arch_vcpu_{load,put} have two callers in virt/kvm/kvm_main.c:
we have to update both the architecture-independent vcpu_{load,put} and
the preempt notifiers.
Another change made in the process is to allow using kvm_get_running_vcpu()
in preemptible code. This is allowed because preempt notifiers ensure
that the value does not change even after the VCPU thread is migrated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's already going to reach 2400 Bytes (which is over half of page
size on 4K page archs), so maybe it's good to have this build-time
check in case it overflows when adding new fields.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_read_guest_atomic() because it's not used anywhere.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Open code the allocation and freeing of the vcpu->run page in
kvm_vm_ioctl_create_vcpu() and kvm_vcpu_destroy() respectively. Doing
so allows kvm_vcpu_init() to be a pure init function and eliminates
kvm_vcpu_uninit() entirely.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the putting of vcpu->pid to kvm_vcpu_destroy(). vcpu->pid is
guaranteed to be NULL when kvm_vcpu_uninit() is called in the error path
of kvm_vm_ioctl_create_vcpu(), e.g. it is explicitly nullified by
kvm_vcpu_init() and is only changed by KVM_RUN.
No functional change intended.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_arch_vcpu_init() and kvm_arch_vcpu_uninit() now that all
arch specific implementations are nops.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an arm specific hook to free the arm64-only sve_state. Doing so
eliminates the last functional code from kvm_arch_vcpu_uninit() across
all architectures and paves the way for removing kvm_arch_vcpu_init()
and kvm_arch_vcpu_uninit() entirely.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold init() into create() now that the two are called back-to-back by
common KVM code (kvm_vcpu_init() calls kvm_arch_vcpu_init() as its last
action, and kvm_vm_ioctl_create_vcpu() calls kvm_arch_vcpu_create()
immediately thereafter). This paves the way for removing
kvm_arch_vcpu_{un}init() entirely.
Note, there is no associated unwinding in kvm_arch_vcpu_uninit() that
needs to be relocated (to kvm_arch_vcpu_destroy()).
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_arch_vcpu_setup() now that all arch specific implementations
are nops.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize the preempt notifier immediately in kvm_vcpu_init() to pave
the way for removing kvm_arch_vcpu_setup(), i.e. to allow arch specific
code to call vcpu_load() during kvm_arch_vcpu_create().
Back when preemption support was added, the location of the call to init
the preempt notifier was perfectly sane. The overall vCPU creation flow
featured a single arch specific hook and the preempt notifer was used
immediately after its initialization (by vcpu_load()). E.g.:
vcpu = kvm_arch_ops->vcpu_create(kvm, n);
if (IS_ERR(vcpu))
return PTR_ERR(vcpu);
preempt_notifier_init(&vcpu->preempt_notifier, &kvm_preempt_ops);
vcpu_load(vcpu);
r = kvm_mmu_setup(vcpu);
vcpu_put(vcpu);
if (r < 0)
goto free_vcpu;
Today, the call to preempt_notifier_init() is sandwiched between two
arch specific calls, kvm_arch_vcpu_create() and kvm_arch_vcpu_setup(),
which needlessly forces x86 (and possibly others?) to split its vCPU
creation flow. Init the preempt notifier prior to any arch specific
call so that each arch can independently decide how best to organize
its creation flow.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unexport kvm_vcpu_cache and kvm_vcpu_{un}init() and make them static
now that they are referenced only in kvm_main.c.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all architectures tightly couple vcpu allocation/free with the
mandatory calls to kvm_{un}init_vcpu(), move the sequences verbatim to
common KVM code.
Move both allocation and initialization in a single patch to eliminate
thrash in arch specific code. The bisection benefits of moving the two
pieces in separate patches is marginal at best, whereas the odds of
introducing a transient arch specific bug are non-zero.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kvm_vcpu_destroy() and wire up all architectures to call the common
function instead of their arch specific implementation. The common
destruction function will be used by future patches to move allocation
and initialization of vCPUs to common KVM code, i.e. to free resources
that are allocated by arch agnostic code.
No functional change intended.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a pre-allocation arch hook to handle checks that are currently done
by arch specific code prior to allocating the vCPU object. This paves
the way for moving the allocation to common KVM code.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the superfluous kvm_arch_vcpu_free() as it is no longer called
from commmon KVM code. Note, kvm_arch_vcpu_destroy() *is* called from
common code, i.e. choosing which function to whack is not completely
arbitrary.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM's inject_abt64() injects an external-abort into an aarch64 guest.
The KVM_CAP_ARM_INJECT_EXT_DABT is intended to do exactly this, but
for an aarch32 guest inject_abt32() injects an implementation-defined
exception, 'Lockdown fault'.
Change this to external abort. For non-LPAE we now get the documented:
| Unhandled fault: external abort on non-linefetch (0x008) at 0x9c800f00
and for LPAE:
| Unhandled fault: synchronous external abort (0x210) at 0x9c800f00
Fixes: 74a64a9816 ("KVM: arm/arm64: Unify 32bit fault injection")
Reported-by: Beata Michalska <beata.michalska@linaro.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200121123356.203000-3-james.morse@arm.com
Beata reports that KVM_SET_VCPU_EVENTS doesn't inject the expected
exception to a non-LPAE aarch32 guest.
The host intends to inject DFSR.FS=0x14 "IMPLEMENTATION DEFINED fault
(Lockdown fault)", but the guest receives DFSR.FS=0x04 "Fault on
instruction cache maintenance". This fault is hooked by
do_translation_fault() since ARMv6, which goes on to silently 'handle'
the exception, and restart the faulting instruction.
It turns out, when TTBCR.EAE is clear DFSR is split, and FS[4] has
to shuffle up to DFSR[10].
As KVM only does this in one place, fix up the static values. We
now get the expected:
| Unhandled fault: lock abort (0x404) at 0x9c800f00
Fixes: 74a64a9816 ("KVM: arm/arm64: Unify 32bit fault injection")
Reported-by: Beata Michalska <beata.michalska@linaro.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200121123356.203000-2-james.morse@arm.com
kvm_test_age_hva() is called upon mmu_notifier_test_young(), but wrong
address range has been passed to handle_hva_to_gpa(). With the wrong
address range, no young bits will be checked in handle_hva_to_gpa().
It means zero is always returned from mmu_notifier_test_young().
This fixes the issue by passing correct address range to the underly
function handle_hva_to_gpa(), so that the hardware young (access) bit
will be visited.
Fixes: 35307b9a5f ("arm/arm64: KVM: Implement Stage-2 page aging")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200121055659.19560-1-gshan@redhat.com
Our MMIO handling is a bit odd, in the sense that it uses an
intermediate per-vcpu structure to store the various decoded
information that describe the access.
But the same information is readily available in the HSR/ESR_EL2
field, and we actually use this field to populate the structure.
Let's simplify the whole thing by getting rid of the superfluous
structure and save a (tiny) bit of space in the vcpu structure.
[32bit fix courtesy of Olof Johansson <olof@lixom.net>]
Signed-off-by: Marc Zyngier <maz@kernel.org>
The wrappers make it less clear that the position of the call
to kvm_arch_async_page_present depends on the architecture, and
that only one of the two call sites will actually be active.
Remove them.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can store reference to kvm_stats_debugfs_item instead of copying
its values to kvm_stat_data.
This allows us to remove duplicated code and usage of temporary
kvm_stat_data inside vm_stat_get et al.
Signed-off-by: Milan Pandurov <milanpa@amazon.de>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix some wrong function names in comment. mmu_check_roots is a typo for
mmu_check_root, vmcs_read_any should be vmcs12_read_any and so on.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_vgic_register_mmio_region() was introduced in commit 4493b1c486
("KVM: arm/arm64: vgic-new: Add MMIO handling framework") but never
used, and even never implemented. Remove it to avoid confusing readers.
Reported-by: Haibin Wang <wanghaibin.wang@huawei.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200119090604.398-1-yuzenghui@huawei.com
Discard is supposed to fail if the collection is not mapped to any
target redistributor. We currently check if the collection is mapped
by "ite->collection" but this is incomplete (e.g., mapping a LPI to
an unmapped collection also results in a non NULL ite->collection).
What actually needs to be checked is its_is_collection_mapped(), let's
turn to it.
Also take this chance to remove an extra blank line.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200114112212.1411-1-yuzenghui@huawei.com
Confusingly, there are three SPSR layouts that a kernel may need to deal
with:
(1) An AArch64 SPSR_ELx view of an AArch64 pstate
(2) An AArch64 SPSR_ELx view of an AArch32 pstate
(3) An AArch32 SPSR_* view of an AArch32 pstate
When the KVM AArch32 support code deals with SPSR_{EL2,HYP}, it's either
dealing with #2 or #3 consistently. On arm64 the PSR_AA32_* definitions
match the AArch64 SPSR_ELx view, and on arm the PSR_AA32_* definitions
match the AArch32 SPSR_* view.
However, when we inject an exception into an AArch32 guest, we have to
synthesize the AArch32 SPSR_* that the guest will see. Thus, an AArch64
host needs to synthesize layout #3 from layout #2.
This patch adds a new host_spsr_to_spsr32() helper for this, and makes
use of it in the KVM AArch32 support code. For arm64 we need to shuffle
the DIT bit around, and remove the SS bit, while for arm we can use the
value as-is.
I've open-coded the bit manipulation for now to avoid having to rework
the existing PSR_* definitions into PSR64_AA32_* and PSR32_AA32_*
definitions. I hope to perform a more thorough refactoring in future so
that we can handle pstate view manipulation more consistently across the
kernel tree.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200108134324.46500-4-mark.rutland@arm.com
When KVM injects an exception into a guest, it generates the CPSR value
from scratch, configuring CPSR.{M,A,I,T,E}, and setting all other
bits to zero.
This isn't correct, as the architecture specifies that some CPSR bits
are (conditionally) cleared or set upon an exception, and others are
unchanged from the original context.
This patch adds logic to match the architectural behaviour. To make this
simple to follow/audit/extend, documentation references are provided,
and bits are configured in order of their layout in SPSR_EL2. This
layout can be seen in the diagram on ARM DDI 0487E.a page C5-426.
Note that this code is used by both arm and arm64, and is intended to
fuction with the SPSR_EL2 and SPSR_HYP layouts.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200108134324.46500-3-mark.rutland@arm.com
When we check for a poisoned page, we use the VMA to tell userspace
about the looming disaster. But we pass a pointer to this VMA
after having released the mmap_sem, which isn't a good idea.
Instead, stash the shift value that goes with this pfn while
we are holding the mmap_sem.
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191211165651.7889-3-maz@kernel.org
Link: https://lore.kernel.org/r/20191217123809.197392-1-james.morse@arm.com
It doesn't needs to call hyp_cpu_pm_exit() in init_hyp_mode() when some
error occurs. hyp_cpu_pm_exit() only needs to be called in
kvm_arch_init() if init_subsystems() fails. So move hyp_cpu_pm_exit()
out from teardown_hyp_mode() and call it directly in kvm_arch_init().
Signed-off-by: Shannon Zhao <shannon.zhao@linux.alibaba.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1575272531-3204-1-git-send-email-shannon.zhao@linux.alibaba.com
Although guest will hardly read and use the PTZ (Pending Table Zero)
bit in GICR_PENDBASER, let us emulate the architecture strictly.
As per IHI 0069E 9.11.30, PTZ field is WO, and reads as 0.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20191220111833.1422-1-yuzenghui@huawei.com
Saving/restoring an unmapped collection is a valid scenario. For
example this happens if a MAPTI command was sent, featuring an
unmapped collection. At the moment the CTE fails to be restored.
Only compare against the number of online vcpus if the rdist
base is set.
Fixes: ea1ad53e1e ("KVM: arm64: vgic-its: Collection table save/restore")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20191213094237.19627-1-eric.auger@redhat.com
On AArch64 you can do a sign-extended load to either a 32-bit or 64-bit
register, and we should only sign extend the register up to the width of
the register as specified in the operation (by using the 32-bit Wn or
64-bit Xn register specifier).
As it turns out, the architecture provides this decoding information in
the SF ("Sixty-Four" -- how cute...) bit.
Let's take advantage of this with the usual 32-bit/64-bit header file
dance and do the right thing on AArch64 hosts.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191212195055.5541-1-christoffer.dall@arm.com
Convert a plethora of parameters and variables in the MMU and page fault
flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM.
Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical
addresses. When TDP is enabled, the fault address is a guest physical
address and thus can be a 64-bit value, even when both KVM and its guest
are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a
64-bit field, not a natural width field.
Using a gva_t for the fault address means KVM will incorrectly drop the
upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to
translate L2 GPAs to L1 GPAs.
Opportunistically rename variables and parameters to better reflect the
dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain
"addr" instead of "vaddr" when the address may be either a GVA or an L2
GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid
a confusing "gpa_t gva" declaration; this also sets the stage for a
future patch to combing nonpaging_page_fault() and tdp_page_fault() with
minimal churn.
Sprinkle in a few comments to document flows where an address is known
to be a GVA and thus can be safely truncated to a 32-bit value. Add
WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help
document such cases and detect bugs.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use out_err jump label to handle resource release. It's a
good practice to release resource in one place and help
eliminate some duplicated code.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use out_err jump label to handle resource release. It's a
good practice to release resource in one place and help
eliminate some duplicated code.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can get rid of unnecessary var page in
kvm_set_pfn_dirty() , thus make code style
similar with kvm_set_pfn_accessed().
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix a bug where we try to do an ultracall on a system without an
ultravisor.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEv0VLfXa2m9eKuaRpnZrqdyxjcZ8FAl35s5kACgkQnZrqdyxj
cZ8cwwf/UPCvZIYPSeYvzrCrlA+wlhBAh3bh47+ZXaNybOpss1xZ7QOFGkgoVBkn
ES2Sdx3qgLvhmbR+nEKon8YCDVSwUj2ehwJu1nzAUzuVYw+m8OHGjdW07+go5KKi
xZOndwBQGYaaWxch2O8Qw27TZU4lcVY/FNQiti5Ahg9dKK98CLyMsWnTms23ZjGD
JMN/jCoMxa6godxWk3mSLaIwXj8P1P4pH3oiMFF8ngRTqyMgi1l02wim+DV10rD4
5JoAF2kzSYngDlrhhQAsSOWrsWst1X2txcHA2QsoL7ZGYUQzzKyHH6zC6dS9eWk4
ni70RLEnJj8YpsjwT52tFYokxwTPfQ==
=kPkE
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-fixes-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master
PPC KVM fix for 5.5
- Fix a bug where we try to do an ultracall on a system without an
ultravisor.
A device mapping is normally always mapped at Stage-2, since there
is very little gain in having it faulted in.
Nonetheless, it is possible to end-up in a situation where the device
mapping has been removed from Stage-2 (userspace munmaped the VFIO
region, and the MMU notifier did its job), but present in a userspace
mapping (userpace has mapped it back at the same address). In such
a situation, the device mapping will be demand-paged as the guest
performs memory accesses.
This requires to be careful when dealing with mapping size, cache
management, and to handle potential execution of a device mapping.
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191211165651.7889-2-maz@kernel.org
In kvm_arch_prepare_memory_region, arm kvm regards the memory region as
writable if the flag has no KVM_MEM_READONLY, and the vm is readonly if
!VM_WRITE.
But there is common usage for setting kvm memory region as follows:
e.g. qemu side (see the PROT_NONE flag)
1. mmap(NULL, size, PROT_NONE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
memory_region_init_ram_ptr()
2. re mmap the above area with read/write authority.
Such example is used in virtio-fs qemu codes which hasn't been upstreamed
[1]. But seems we can't forbid this example.
Without this patch, it will cause an EPERM during kvm_set_memory_region()
and cause qemu boot crash.
As told by Ard, "the underlying assumption is incorrect, i.e., that the
value of vm_flags at this point in time defines how the VMA is used
during its lifetime. There may be other cases where a VMA is created
with VM_READ vm_flags that are changed to VM_READ|VM_WRITE later, and
we are currently rejecting this use case as well."
[1] https://gitlab.com/virtio-fs/qemu/blob/5a356e/hw/virtio/vhost-user-fs.c#L488
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191206020802.196108-1-justin.he@arm.com
Use wrapper function lock_all_vcpus()/unlock_all_vcpus()
in kvm_vgic_create() to remove duplicated code dealing
with locking and unlocking all vcpus in a vm.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/1575081918-11401-1-git-send-email-linmiaohe@huawei.com
In kvm_vgic_dist_init() called from kvm_vgic_map_resources(), if
dist->vgic_model is invalid, dist->spis will be freed without set
dist->spis = NULL. And in vgicv2 resources clean up path,
__kvm_vgic_destroy() will be called to free allocated resources.
And dist->spis will be freed again in clean up chain because we
forget to set dist->spis = NULL in kvm_vgic_dist_init() failed
path. So double free would happen.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/1574923128-19956-1-git-send-email-linmiaohe@huawei.com
As arg dummy is not really needed, there's no need to pass
NULL when calling cpu_init_hyp_mode(). So clean it up.
Fixes: 67f6919766 ("arm64: kvm: allows kvm cpu hotplug")
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1574320559-5662-1-git-send-email-linmiaohe@huawei.com
The jump label out_free_1 and out_free_2 deal with
the same stuff, so git rid of one and rename the
label out_free_0a to retain the label name order.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Allow non-ISV data aborts to be reported to userspace
- Allow injection of data aborts from userspace
- Expose stolen time to guests
- GICv4 performance improvements
- vgic ITS emulation fixes
- Simplify FWB handling
- Enable halt pool counters
- Make the emulated timer PREEMPT_RT compliant
-----BEGIN PGP SIGNATURE-----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=SxBH
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm updates for Linux 5.5:
- Allow non-ISV data aborts to be reported to userspace
- Allow injection of data aborts from userspace
- Expose stolen time to guests
- GICv4 performance improvements
- vgic ITS emulation fixes
- Simplify FWB handling
- Enable halt pool counters
- Make the emulated timer PREEMPT_RT compliant
Conflicts:
include/uapi/linux/kvm.h
Fetching an index for any vcpu in kvm->vcpus array by traversing
the entire array everytime is costly.
This patch remembers the position of each vcpu in kvm->vcpus array
by storing it in vcpus_idx under kvm_vcpu structure.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The out_err label and var ret is unnecessary, clean them up.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a comment explaining the rational behind having both
no_compat open and ioctl callbacks to fend off compat tasks.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On a system without KVM_COMPAT, we prevent IOCTLs from being issued
by a compat task. Although this prevents most silly things from
happening, it can still confuse a 32bit userspace that is able
to open the kvm device (the qemu test suite seems to be pretty
mad with this behaviour).
Take a more radical approach and return a -ENODEV to the compat
task.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VT-d posted interrupts, DAX/ZONE_DEVICE,
module unload/reload.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdyrEsAAoJEL/70l94x66DIOkH/Asqrh4o4pwfRHWE+9rnM6PI
j8oFi7Q4eRXJnP4zEMnMbb6xD/BfSH1tWEcPcYgIxD/t0DFx8F92/xsETAJ/Qc5n
CWpmnhMkJqERlV+GSRuBqnheMo0CEH1Ab1QZKhh5U3//pK3OtGY9WyydJHWcquTh
bGh2pnxwVZOtIIEmclUUfKjyR2Fu8hJLnQwzWgYZ27UK7J2pLmiiTX0vwQG359Iq
sDn9ND33pCBW5e/D2mzccRjOJEvzwrumewM1sRDsoAYLJzUjg9+xD83vZDa1d7R6
gajCDFWVJbPoLvUY+DgsZBwMMlogElimJMT/Zft3ERbCsYJbFvcmwp4JzyxDxQ4=
=J6KN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Fix unwinding of KVM_CREATE_VM failure, VT-d posted interrupts,
DAX/ZONE_DEVICE, and module unload/reload"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: MMU: Do not treat ZONE_DEVICE pages as being reserved
KVM: VMX: Introduce pi_is_pir_empty() helper
KVM: VMX: Do not change PID.NDST when loading a blocked vCPU
KVM: VMX: Consider PID.PIR to determine if vCPU has pending interrupts
KVM: VMX: Fix comment to specify PID.ON instead of PIR.ON
KVM: X86: Fix initialization of MSR lists
KVM: fix placement of refcount initialization
KVM: Fix NULL-ptr deref after kvm_create_vm fails
Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and
instead manually handle ZONE_DEVICE on a case-by-case basis. For things
like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal
pages, e.g. put pages grabbed via gup(). But for flows such as setting
A/D bits or shifting refcounts for transparent huge pages, KVM needs to
to avoid processing ZONE_DEVICE pages as the flows in question lack the
underlying machinery for proper handling of ZONE_DEVICE pages.
This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup()
when running a KVM guest backed with /dev/dax memory, as KVM straight up
doesn't put any references to ZONE_DEVICE pages acquired by gup().
Note, Dan Williams proposed an alternative solution of doing put_page()
on ZONE_DEVICE pages immediately after gup() in order to simplify the
auditing needed to ensure is_zone_device_page() is called if and only if
the backing device is pinned (via gup()). But that approach would break
kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til
unmap() when accessing guest memory, unlike KVM's secondary MMU, which
coordinates with mmu_notifier invalidations to avoid creating stale
page references, i.e. doesn't rely on pages being pinned.
[*] http://lkml.kernel.org/r/20190919115547.GA17963@angband.pl
Reported-by: Adam Borowski <kilobyte@angband.pl>
Analyzed-by: David Hildenbrand <david@redhat.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Fixes: 3565fce3a6 ("mm, x86: get_user_pages() for dax mappings")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported by syzkaller:
=============================
WARNING: suspicious RCU usage
-----------------------------
./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by repro_11/12688.
stack backtrace:
Call Trace:
dump_stack+0x7d/0xc5
lockdep_rcu_suspicious+0x123/0x170
kvm_dev_ioctl+0x9a9/0x1260 [kvm]
do_vfs_ioctl+0x1a1/0xfb0
ksys_ioctl+0x6d/0x80
__x64_sys_ioctl+0x73/0xb0
do_syscall_64+0x108/0xaa0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Commit a97b0e773e (kvm: call kvm_arch_destroy_vm if vm creation fails)
sets users_count to 1 before kvm_arch_init_vm(), however, if kvm_arch_init_vm()
fails, we need to decrease this count. By moving it earlier, we can push
the decrease to out_err_no_arch_destroy_vm without introducing yet another
error label.
syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=15209b84e00000
Reported-by: syzbot+75475908cd0910f141ee@syzkaller.appspotmail.com
Fixes: a97b0e773e ("kvm: call kvm_arch_destroy_vm if vm creation fails")
Cc: Jim Mattson <jmattson@google.com>
Analyzed-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported by syzkaller:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 14727 Comm: syz-executor.3 Not tainted 5.4.0-rc4+ #0
RIP: 0010:kvm_coalesced_mmio_init+0x5d/0x110 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:121
Call Trace:
kvm_dev_ioctl_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:3446 [inline]
kvm_dev_ioctl+0x781/0x1490 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3494
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0x196/0x1150 fs/ioctl.c:696
ksys_ioctl+0x62/0x90 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x6e/0xb0 fs/ioctl.c:718
do_syscall_64+0xca/0x5d0 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Commit 9121923c45 ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm")
moves memslots and buses allocations around, however, if kvm->srcu/irq_srcu fails
initialization, NULL will be returned instead of error code, NULL will not be intercepted
in kvm_dev_ioctl_create_vm() and be dereferenced by kvm_coalesced_mmio_init(), this patch
fixes it.
Moving the initialization is required anyway to avoid an incorrect synchronize_srcu that
was also reported by syzkaller:
wait_for_completion+0x29c/0x440 kernel/sched/completion.c:136
__synchronize_srcu+0x197/0x250 kernel/rcu/srcutree.c:921
synchronize_srcu_expedited kernel/rcu/srcutree.c:946 [inline]
synchronize_srcu+0x239/0x3e8 kernel/rcu/srcutree.c:997
kvm_page_track_unregister_notifier+0xe7/0x130 arch/x86/kvm/page_track.c:212
kvm_mmu_uninit_vm+0x1e/0x30 arch/x86/kvm/mmu.c:5828
kvm_arch_destroy_vm+0x4a2/0x5f0 arch/x86/kvm/x86.c:9579
kvm_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:702 [inline]
so do it.
Reported-by: syzbot+89a8060879fa0bd2db4f@syzkaller.appspotmail.com
Reported-by: syzbot+e27e7027eb2b80e44225@syzkaller.appspotmail.com
Fixes: 9121923c45 ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm")
Cc: Jim Mattson <jmattson@google.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just like we do for WFE trapping, it can be useful to turn off
WFI trapping when the physical CPU is not oversubscribed (that
is, the vcpu is the only runnable process on this CPU) *and*
that we're using direct injection of interrupts.
The conditions are reevaluated on each vcpu_load(), ensuring that
we don't switch to this mode on a busy system.
On a GICv4 system, this has the effect of reducing the generation
of doorbell interrupts to zero when the right conditions are
met, which is a huge improvement over the current situation
(where the doorbells are screaming if the CPU ever hits a
blocking WFI).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191107160412.30301-3-maz@kernel.org
In order to find out whether a vcpu is likely to be the target of
VLPIs (and to further optimize the way we deal with those), let's
track the number of VLPIs a vcpu can receive.
This gets implemented with an atomic variable that gets incremented
or decremented on map, unmap and move of a VLPI.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191107160412.30301-2-maz@kernel.org
The timers are canceled from an preempt-notifier which is invoked with
disabled preemption which is not allowed on PREEMPT_RT.
The timer callback is short so in could be invoked in hard-IRQ context
on -RT.
Let the timer expire on hard-IRQ context even on -RT.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191107095424.16647-1-bigeasy@linutronix.de
The page table pages corresponding to broken down large pages are zapped in
FIFO order, so that the large page can potentially be recovered, if it is
not longer being used for execution. This removes the performance penalty
for walking deeper EPT page tables.
By default, one large page will last about one hour once the guest
reaches a steady state.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add a function to create a kernel thread associated with a given VM. In
particular, it ensures that the worker thread inherits the priority and
cgroups of the calling thread.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In kvm_create_vm(), if we've successfully called kvm_arch_init_vm(), but
then fail later in the function, we need to call kvm_arch_destroy_vm()
so that it can do any necessary cleanup (like freeing memory).
Fixes: 44a95dae1d ("KVM: x86: Detect and Initialize AVIC support")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Junaid Shahid <junaids@google.com>
[Remove dependency on "kvm: Don't clear reference count on
kvm_create_vm() error path" which was not committed. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's possible that two LPIs locate in the same "byte_offset" but target
two different vcpus, where their pending status are indicated by two
different pending tables. In such a scenario, using last_byte_offset
optimization will lead KVM relying on the wrong pending table entry.
Let us use last_ptr instead, which can be treated as a byte index into
a pending table and also, can be vcpu specific.
Fixes: 280771252c ("KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES")
Cc: stable@vger.kernel.org
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20191029071919.177-4-yuzenghui@huawei.com
Fix various comments, including wrong function names, grammar mistakes
and specification references.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191029071919.177-3-yuzenghui@huawei.com
When the VHE code was reworked, a lot of the vgic stuff was moved around,
but the GICv4 residency code did stay untouched, meaning that we come
in and out of residency on each flush/sync, which is obviously suboptimal.
To address this, let's move things around a bit:
- Residency entry (flush) moves to vcpu_load
- Residency exit (sync) moves to vcpu_put
- On blocking (entry to WFI), we "put"
- On unblocking (exit from WFI), we "load"
Because these can nest (load/block/put/load/unblock/put, for example),
we now have per-VPE tracking of the residency state.
Additionally, vgic_v4_put gains a "need doorbell" parameter, which only
gets set to true when blocking because of a WFI. This allows a finer
control of the doorbell, which now also gets disabled as soon as
it gets signaled.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191027144234.8395-2-maz@kernel.org
This reorganization will allow us to call kvm_arch_destroy_vm in the
event that kvm_create_vm fails after calling kvm_arch_init_vm.
Suggested-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new helper, kvm_put_kvm_no_destroy(), to handle putting a borrowed
reference[*] to the VM when installing a new file descriptor fails. KVM
expects the refcount to remain valid in this case, as the in-progress
ioctl() has an explicit reference to the VM. The primary motiviation
for the helper is to document that the 'kvm' pointer is still valid
after putting the borrowed reference, e.g. to document that doing
mutex(&kvm->lock) immediately after putting a ref to kvm isn't broken.
[*] When exposing a new object to userspace via a file descriptor, e.g.
a new vcpu, KVM grabs a reference to itself (the VM) prior to making
the object visible to userspace to avoid prematurely freeing the VM
in the scenario where userspace immediately closes file descriptor.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Special PMU edition:
- Fix cycle counter truncation
- Fix cycle counter overflow limit on pure 64bit system
- Allow chained events to be actually functional
- Correct sample period after overflow
-----BEGIN PGP SIGNATURE-----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=ORrS
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.4, take #2
Special PMU edition:
- Fix cycle counter truncation
- Fix cycle counter overflow limit on pure 64bit system
- Allow chained events to be actually functional
- Correct sample period after overflow
Don't waste cycles to shrink/grow vCPU halt_poll_ns if host
side polling is disabled.
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow user space to inform the KVM host where in the physical memory
map the paravirtualized time structures should be located.
User space can set an attribute on the VCPU providing the IPA base
address of the stolen time structure for that VCPU. This must be
repeated for every VCPU in the VM.
The address is given in terms of the physical address visible to
the guest and must be 64 byte aligned. The guest will discover the
address via a hypercall.
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently a kvm_device_ops structure cannot be const without triggering
compiler warnings. However the structure doesn't need to be written to
and, by marking it const, it can be read-only in memory. Add some more
const keywords to allow this.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Implement the service call for configuring a shared structure between a
VCPU and the hypervisor in which the hypervisor can write the time
stolen from the VCPU's execution time by other tasks on the host.
User space allocates memory which is placed at an IPA also chosen by user
space. The hypervisor then updates the shared structure using
kvm_put_guest() to ensure single copy atomicity of the 64-bit value
reporting the stolen time in nanoseconds.
Whenever stolen time is enabled by the guest, the stolen time counter is
reset.
The stolen time itself is retrieved from the sched_info structure
maintained by the Linux scheduler code. We enable SCHEDSTATS when
selecting KVM Kconfig to ensure this value is meaningful.
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
This provides a mechanism for querying which paravirtualized time
features are available in this hypervisor.
Also add the header file which defines the ABI for the paravirtualized
time features we're about to add.
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently intertwine the KVM PSCI implementation with the general
dispatch of hypercall handling, which makes perfect sense because PSCI
is the only category of hypercalls we support.
However, as we are about to support additional hypercalls, factor out
this functionality into a separate hypercall handler file.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[steven.price@arm.com: rebased]
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In some scenarios, such as buggy guest or incorrect configuration of the
VMM and firmware description data, userspace will detect a memory access
to a portion of the IPA, which is not mapped to any MMIO region.
For this purpose, the appropriate action is to inject an external abort
to the guest. The kernel already has functionality to inject an
external abort, but we need to wire up a signal from user space that
lets user space tell the kernel to do this.
It turns out, we already have the set event functionality which we can
perfectly reuse for this.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
For a long time, if a guest accessed memory outside of a memslot using
any of the load/store instructions in the architecture which doesn't
supply decoding information in the ESR_EL2 (the ISV bit is not set), the
kernel would print the following message and terminate the VM as a
result of returning -ENOSYS to userspace:
load/store instruction decoding not implemented
The reason behind this message is that KVM assumes that all accesses
outside a memslot is an MMIO access which should be handled by
userspace, and we originally expected to eventually implement some sort
of decoding of load/store instructions where the ISV bit was not set.
However, it turns out that many of the instructions which don't provide
decoding information on abort are not safe to use for MMIO accesses, and
the remaining few that would potentially make sense to use on MMIO
accesses, such as those with register writeback, are not used in
practice. It also turns out that fetching an instruction from guest
memory can be a pretty horrible affair, involving stopping all CPUs on
SMP systems, handling multiple corner cases of address translation in
software, and more. It doesn't appear likely that we'll ever implement
this in the kernel.
What is much more common is that a user has misconfigured his/her guest
and is actually not accessing an MMIO region, but just hitting some
random hole in the IPA space. In this scenario, the error message above
is almost misleading and has led to a great deal of confusion over the
years.
It is, nevertheless, ABI to userspace, and we therefore need to
introduce a new capability that userspace explicitly enables to change
behavior.
This patch introduces KVM_CAP_ARM_NISV_TO_USER (NISV meaning Non-ISV)
which does exactly that, and introduces a new exit reason to report the
event to userspace. User space can then emulate an exception to the
guest, restart the guest, suspend the guest, or take any other
appropriate action as per the policy of the running system.
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The PMU emulation code uses the perf event sample period to trigger
the overflow detection. This works fine for the *first* overflow
handling, but results in a huge number of interrupts on the host,
unrelated to the number of interrupts handled in the guest (a x20
factor is pretty common for the cycle counter). On a slow system
(such as a SW model), this can result in the guest only making
forward progress at a glacial pace.
It turns out that the clue is in the name. The sample period is
exactly that: a period. And once the an overflow has occured,
the following period should be the full width of the associated
counter, instead of whatever the guest had initially programed.
Reset the sample period to the architected value in the overflow
handler, which now results in a number of host interrupts that is
much closer to the number of interrupts in the guest.
Fixes: b02386eb7d ("arm64: KVM: Add PMU overflow interrupt routing")
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The current convention for KVM to request a chained event from the
host PMU is to set bit[0] in attr.config1 (PERF_ATTR_CFG1_KVM_PMU_CHAINED).
But as it turns out, this bit gets set *after* we create the kernel
event that backs our virtual counter, meaning that we never get
a 64bit counter.
Moving the setting to an earlier point solves the problem.
Fixes: 80f393a23b ("KVM: arm/arm64: Support chained PMU counters")
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When a counter is disabled, its value is sampled before the event
is being disabled, and the value written back in the shadow register.
In that process, the value gets truncated to 32bit, which is adequate
for any counter but the cycle counter (defined as a 64bit counter).
This obviously results in a corrupted counter, and things like
"perf record -e cycles" not working at all when run in a guest...
A similar, but less critical bug exists in kvm_pmu_get_counter_value.
Make the truncation conditional on the counter not being the cycle
counter, which results in a minor code reorganisation.
Fixes: 80f393a23b ("KVM: arm/arm64: Support chained PMU counters")
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Reported-by: Julien Thierry <julien.thierry.kdev@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
- Remove the now obsolete hyp_alternate_select construct
- Fix the TRACE_INCLUDE_PATH macro in the vgic code
-----BEGIN PGP SIGNATURE-----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=9luB
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.4, take #1
- Remove the now obsolete hyp_alternate_select construct
- Fix the TRACE_INCLUDE_PATH macro in the vgic code
The largepages debugfs entry is incremented/decremented as shadow
pages are created or destroyed. Clearing it will result in an
underflow, which is harmless to KVM but ugly (and could be
misinterpreted by tools that use debugfs information), so make
this particular statistic read-only.
Cc: kvm-ppc@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* ARM: ITS translation cache; support for 512 vCPUs, various cleanups
and bugfixes
* PPC: various minor fixes and preparation
* x86: bugfixes all over the place (posted interrupts, SVM, emulation
corner cases, blocked INIT), some IPI optimizations
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdf7fdAAoJEL/70l94x66DJzkIAKDcuWXJB4Qtoto6yUvPiHZm
LYkY/Dn1zulb/DhzrBoXFey/jZXwl9kxMYkVTefnrAl0fRwFGX+G1UYnQrtAL6Gr
ifdTYdy3kZhXCnnp99QAantWDswJHo1THwbmHrlmkxS4MdisEaTHwgjaHrDRZ4/d
FAEwW2isSonP3YJfTtsKFFjL9k2D4iMnwZ/R2B7UOaWvgnerZ1GLmOkilvnzGGEV
IQ89IIkWlkKd4SKgq8RkDKlfW5JrLrSdTK2Uf0DvAxV+J0EFkEaR+WlLsqumra0z
Eg3KwNScfQj0DyT0TzurcOxObcQPoMNSFYXLRbUu1+i0CGgm90XpF1IosiuihgU=
=w6I3
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"s390:
- ioctl hardening
- selftests
ARM:
- ITS translation cache
- support for 512 vCPUs
- various cleanups and bugfixes
PPC:
- various minor fixes and preparation
x86:
- bugfixes all over the place (posted interrupts, SVM, emulation
corner cases, blocked INIT)
- some IPI optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits)
KVM: X86: Use IPI shorthands in kvm guest when support
KVM: x86: Fix INIT signal handling in various CPU states
KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode
KVM: VMX: Stop the preemption timer during vCPU reset
KVM: LAPIC: Micro optimize IPI latency
kvm: Nested KVM MMUs need PAE root too
KVM: x86: set ctxt->have_exception in x86_decode_insn()
KVM: x86: always stop emulation on page fault
KVM: nVMX: trace nested VM-Enter failures detected by H/W
KVM: nVMX: add tracepoint for failed nested VM-Enter
x86: KVM: svm: Fix a check in nested_svm_vmrun()
KVM: x86: Return to userspace with internal error on unexpected exit reason
KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code
KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers
doc: kvm: Fix return description of KVM_SET_MSRS
KVM: X86: Tune PLE Window tracepoint
KVM: VMX: Change ple_window type to unsigned int
KVM: X86: Remove tailing newline for tracepoints
KVM: X86: Trace vcpu_id for vmexit
KVM: x86: Manually calculate reserved bits when loading PDPTRS
...
The first/last indexes are typically shared with a user app.
The app can change the 'last' index that the kernel uses
to store the next result. This change sanity checks the index
before using it for writing to a potentially arbitrary address.
This fixes CVE-2019-14821.
Cc: stable@vger.kernel.org
Fixes: 5f94c1741b ("KVM: Add coalesced MMIO support (common part)")
Signed-off-by: Matt Delco <delco@chromium.org>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reported-by: syzbot+983c866c3dd6efa3662a@syzkaller.appspotmail.com
[Use READ_ONCE. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 49dfe94fe5 ("KVM: arm/arm64: Fix TRACE_INCLUDE_PATH") fixes
TRACE_INCLUDE_PATH to the correct relative path to the define_trace.h
and explains why did the old one work.
The same fix should be applied to virt/kvm/arm/vgic/trace.h.
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
While parts of the VGIC support a large number of vcpus (we
bravely allow up to 512), other parts are more limited.
One of these limits is visible in the KVM_IRQ_LINE ioctl, which
only allows 256 vcpus to be signalled when using the CPU or PPI
types. Unfortunately, we've cornered ourselves badly by allocating
all the bits in the irq field.
Since the irq_type subfield (8 bit wide) is currently only taking
the values 0, 1 and 2 (and we have been careful not to allow anything
else), let's reduce this field to only 4 bits, and allocate the
remaining 4 bits to a vcpu2_index, which acts as a multiplier:
vcpu_id = 256 * vcpu2_index + vcpu_index
With that, and a new capability (KVM_CAP_ARM_IRQ_LINE_LAYOUT_2)
allowing this to be discovered, it becomes possible to inject
PPIs to up to 4096 vcpus. But please just don't.
Whilst we're there, add a clarification about the use of KVM_IRQ_LINE
on arm, which is not completely conditionned by KVM_CAP_IRQCHIP.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
- Fix GICv2 emulation bug (KVM)
- Fix deadlock in virtual GIC interrupt injection code (KVM)
- Fix kprobes blacklist init failure due to broken kallsyms lookup
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl1mW/0ACgkQt6xw3ITB
YzQWEQgAnG+20c1uzPqIEME3o0bCXsci0I1w4yPYPH/NVrfmJdAjfway/cLZlMCh
JYKBTc392kfYXgzAvMqvjNe+9O/qg9MnMxV7Afjfk9e0k+41Kcw/7U39/B6q4yOg
zIz4YW6SdbbbUfY9VgR8SjsZ3HwJoP8YVNEv3W259funtFHkKDO35h1iG1f57GWL
UELjEnag9dmCH35ykt7+SC4woBGjOQnic2XLSS7VZuU/26TfnUyo2HCdDcLcViCZ
DHDQgaHAscb+tgJjeNtNEeRu+GPBG9LOhPw4EpBjGHeoJla7z74GOJPMEt4Ufoqd
qG9TPfOFAFM30/PAdlWF3SjfzqK3PA==
=WYzY
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Hot on the heels of our last set of fixes are a few more for -rc7.
Two of them are fixing issues with our virtual interrupt controller
implementation in KVM/arm, while the other is a longstanding but
straightforward kallsyms fix which was been acked by Masami and
resolves an initialisation failure in kprobes observed on arm64.
- Fix GICv2 emulation bug (KVM)
- Fix deadlock in virtual GIC interrupt injection code (KVM)
- Fix kprobes blacklist init failure due to broken kallsyms lookup"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI
KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is long
kallsyms: Don't let kallsyms_lookup_size_offset() fail on retrieving the first symbol
A guest is not allowed to inject a SGI (or clear its pending state)
by writing to GICD_ISPENDR0 (resp. GICD_ICPENDR0), as these bits are
defined as WI (as per ARM IHI 0048B 4.3.7 and 4.3.8).
Make sure we correctly emulate the architecture.
Fixes: 96b298000d ("KVM: arm/arm64: vgic-new: Add PENDING registers handlers")
Cc: stable@vger.kernel.org # 4.7+
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
If the ap_list is longer than 256 entries, merge_final() in list_sort()
will call the comparison callback with the same element twice, causing
a deadlock in vgic_irq_cmp().
Fix it by returning early when irqa == irqb.
Cc: stable@vger.kernel.org # 4.7+
Fixes: 8e44474579 ("KVM: arm/arm64: vgic-new: Add IRQ sorting")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
[maz: massaged commit log and patch, added Fixes and Cc-stable]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
At the moment we use 2 IO devices per GICv3 redistributor: one
one for the RD_base frame and one for the SGI_base frame.
Instead we can use a single IO device per redistributor (the 2
frames are contiguous). This saves slots on the KVM_MMIO_BUS
which is currently limited to NR_IOBUS_DEVS (1000).
This change allows to instantiate up to 512 redistributors and may
speed the guest boot with a large number of VCPUs.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Detected by Coccinelle (and Will Deacon) using
scripts/coccinelle/misc/semicolon.cocci.
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
- Don't overskip instructions on MMIO emulation
- Fix UBSAN splat when initializing PPI priorities
-----BEGIN PGP SIGNATURE-----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=FGm5
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm/fixes
Pull KVM/arm fixes from Marc Zyngier as per Paulo's request at:
https://lkml.kernel.org/r/21ae69a2-2546-29d0-bff6-2ea825e3d968@redhat.com
"One (hopefully last) set of fixes for KVM/arm for 5.3: an embarassing
MMIO emulation regression, and a UBSAN splat. Oh well...
- Don't overskip instructions on MMIO emulation
- Fix UBSAN splat when initializing PPI priorities"
* tag 'kvmarm-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm:
KVM: arm/arm64: VGIC: Properly initialise private IRQ affinity
KVM: arm/arm64: Only skip MMIO insn once
At the moment we initialise the target *mask* of a virtual IRQ to the
VCPU it belongs to, even though this mask is only defined for GICv2 and
quickly runs out of bits for many GICv3 guests.
This behaviour triggers an UBSAN complaint for more than 32 VCPUs:
------
[ 5659.462377] UBSAN: Undefined behaviour in virt/kvm/arm/vgic/vgic-init.c:223:21
[ 5659.471689] shift exponent 32 is too large for 32-bit type 'unsigned int'
------
Also for GICv3 guests the reporting of TARGET in the "vgic-state" debugfs
dump is wrong, due to this very same problem.
Because there is no requirement to create the VGIC device before the
VCPUs (and QEMU actually does it the other way round), we can't safely
initialise mpidr or targets in kvm_vgic_vcpu_init(). But since we touch
every private IRQ for each VCPU anyway later (in vgic_init()), we can
just move the initialisation of those fields into there, where we
definitely know the VGIC type.
On the way make sure we really have either a VGICv2 or a VGICv3 device,
since the existing code is just checking for "VGICv3 or not", silently
ignoring the uninitialised case.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reported-by: Dave Martin <dave.martin@arm.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
If after an MMIO exit to userspace a VCPU is immediately run with an
immediate_exit request, such as when a signal is delivered or an MMIO
emulation completion is needed, then the VCPU completes the MMIO
emulation and immediately returns to userspace. As the exit_reason
does not get changed from KVM_EXIT_MMIO in these cases we have to
be careful not to complete the MMIO emulation again, when the VCPU is
eventually run again, because the emulation does an instruction skip
(and doing too many skips would be a waste of guest code :-) We need
to use additional VCPU state to track if the emulation is complete.
As luck would have it, we already have 'mmio_needed', which even
appears to be used in this way by other architectures already.
Fixes: 0d640732db ("arm64: KVM: Skip MMIO insn after emulation")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When a vpcu is about to block by calling kvm_vcpu_block, we call
back into the arch code to allow any form of synchronization that
may be required at this point (SVN stops the AVIC, ARM synchronises
the VMCR and enables GICv4 doorbells). But this synchronization
comes in quite late, as we've potentially waited for halt_poll_ns
to expire.
Instead, let's move kvm_arch_vcpu_blocking() to the beginning of
kvm_vcpu_block(), which on ARM has several benefits:
- VMCR gets synchronised early, meaning that any interrupt delivered
during the polling window will be evaluated with the correct guest
PMR
- GICv4 doorbells are enabled, which means that any guest interrupt
directly injected during that window will be immediately recognised
Tang Nianyao ran some tests on a GICv4 machine to evaluate such
change, and reported up to a 10% improvement for netperf:
<quote>
netperf result:
D06 as server, intel 8180 server as client
with change:
package 512 bytes - 5500 Mbits/s
package 64 bytes - 760 Mbits/s
without change:
package 512 bytes - 5000 Mbits/s
package 64 bytes - 710 Mbits/s
</quote>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Since commit 503a62862e ("KVM: arm/arm64: vgic: Rely on the GIC driver to
parse the firmware tables"), the vgic_v{2,3}_probe functions stopped using
a DT node. Commit 9097773245 ("KVM: arm/arm64: vgic-new: vgic_init:
implement kvm_vgic_hyp_init") changed the functions again, and now they
require exactly one argument, a struct gic_kvm_info populated by the GIC
driver. Unfortunately the comments regressed and state that a DT node is
used instead. Change the function comments to reflect the current
prototypes.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that we have a cache of MSI->LPI translations, it is pretty
easy to implement kvm_arch_set_irq_inatomic (this cache can be
parsed without sleeping).
Hopefully, this will improve some LPI-heavy workloads.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When performing an MSI injection, let's first check if the translation
is already in the cache. If so, let's inject it quickly without
going through the whole translation process.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
On a successful translation, preserve the parameters in the LPI
translation cache. Each translation is reusing the last slot
in the list, naturally evicting the least recently used entry.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In order to avoid leaking vgic_irq structures on teardown, we need to
drop all references to LPIs before deallocating the cache itself.
This is done by invalidating the cache on vgic teardown.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
If an ITS gets disabled, we need to make sure that further interrupts
won't hit in the cache. For that, we invalidate the translation cache
when the ITS is disabled.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
If a vcpu disables LPIs at its redistributor level, we need to make sure
we won't pend more interrupts. For this, we need to invalidate the LPI
translation cache.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The LPI translation cache needs to be discarded when an ITS command
may affect the translation of an LPI (DISCARD, MAPC and MAPD with V=0)
or the routing of an LPI to a redistributor with disabled LPIs (MOVI,
MOVALL).
We decide to perform a full invalidation of the cache, irrespective
of the LPI that is affected. Commands are supposed to be rare enough
that it doesn't matter.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
There's a number of cases where we need to invalidate the caching
of translations, so let's add basic support for that.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Our LPI translation cache needs to be able to drop the refcount
on an LPI whilst already holding the lpi_list_lock.
Let's add a new primitive for this.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add the basic data structure that expresses an MSI to LPI
translation as well as the allocation/release hooks.
The size of the cache is arbitrarily defined as 16*nr_vcpus.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
- Fix our system register reset so that we stop writing
non-sensical values to them, and track which registers
get reset instead.
- Sync VMCR back from the GIC on WFI so that KVM has an
exact vue of PMR.
- Reevaluate state of HW-mapped, level triggered interrupts
on enable.
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl1NHNIPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpDITgP/irkNHkSxRPBswncMb9oYguoGOUIStxSApfD
E/9wH5khyXBvThqPmaY65kJok9YZwd+PbqDvp6umCkWGUeIbWI4bzM2bD974La8N
qaogJxOQubqg9r/TYf5f3EI8V67CS+E/ixK6zrz2XvqvFEmQ3OMhrRFjoFkEK1wA
yQwV15h/4IbebI2D1pkVbi8S/s54wAc3dr20cS3KfqrLYrvEIQrCm7lIOVwKk8fo
wjk8D+2IuF9LBsClQUOZwHG26yxcbd7FNwm4qEneR3UmtT14AgHnPJO3uQUTxM+o
bRajO3tXx4hIe1PAG7l4RxW47+AfjhAD1kzWtmM+xN5NdIfoew/pGMf3HXLhYhYO
9dM5YOPrF5CmZGNbSnrNPwD5mejLngNLtWBUvUKMxjtxILhADxGZIOgfM08pr+XO
9I1gzhPpczc3IIDEmDspkQnylQBPXyu2uOORPllHmmuZwMeODQ2pyyw9leBXq7lx
5tUybLPR2N1uxAIfkN6gEJKq0YgyPcapcVBr9vgyEFA6YKKyGZqthDMTIvm1TlGI
3ha2lUdRjYnYVUZ+WY8RqZVhJ3mB5qgCW4GUUeDx1nm5Ttskx1ic0WGIiErD21vs
Eo//2N9ROp+E1iJC8dCdVZjKy0ZbOJwdW9t9Y89Coo6PF6SqiXBlxrqR+GIQdKlo
P1hdjjRI
=pZYJ
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.3, take #2
- Fix our system register reset so that we stop writing
non-sensical values to them, and track which registers
get reset instead.
- Sync VMCR back from the GIC on WFI so that KVM has an
exact vue of PMR.
- Reevaluate state of HW-mapped, level triggered interrupts
on enable.
The same check is already done in kvm_is_reserved_pfn.
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A HW mapped level sensitive interrupt asserted by a device will not be put
into the ap_list if it is disabled at the VGIC level. When it is enabled
again, it will be inserted into the ap_list and written to a list register
on guest entry regardless of the state of the device.
We could argue that this can also happen on real hardware, when the command
to enable the interrupt reached the GIC before the device had the chance to
de-assert the interrupt signal; however, we emulate the distributor and
redistributors in software and we can do better than that.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Since commit commit 328e566479 ("KVM: arm/arm64: vgic: Defer
touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or
its GICv2 equivalent) loaded as long as we can, only syncing it
back when we're scheduled out.
There is a small snag with that though: kvm_vgic_vcpu_pending_irq(),
which is indirectly called from kvm_vcpu_check_block(), needs to
evaluate the guest's view of ICC_PMR_EL1. At the point were we
call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever
changes to PMR is not visible in memory until we do a vcpu_put().
Things go really south if the guest does the following:
mov x0, #0 // or any small value masking interrupts
msr ICC_PMR_EL1, x0
[vcpu preempted, then rescheduled, VMCR sampled]
mov x0, #ff // allow all interrupts
msr ICC_PMR_EL1, x0
wfi // traps to EL2, so samping of VMCR
[interrupt arrives just after WFI]
Here, the hypervisor's view of PMR is zero, while the guest has enabled
its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no
interrupts are pending (despite an interrupt being received) and we'll
block for no reason. If the guest doesn't have a periodic interrupt
firing once it has blocked, it will stay there forever.
To avoid this unfortuante situation, let's resync VMCR from
kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block()
will observe the latest value of PMR.
This has been found by booting an arm64 Linux guest with the pseudo NMI
feature, and thus using interrupt priorities to mask interrupts instead
of the usual PSTATE masking.
Cc: stable@vger.kernel.org # 4.12
Fixes: 328e566479 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put")
Signed-off-by: Marc Zyngier <maz@kernel.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Also, when doing this, change kvm_arch_create_vcpu_debugfs() to return
void instead of an integer, as we should not care at all about if this
function actually does anything or not.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <x86@kernel.org>
Cc: <kvm@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need for this function as all arches have to implement
kvm_arch_create_vcpu_debugfs() no matter what. A #define symbol
let us actually simplify the code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After commit d73eb57b80 (KVM: Boost vCPUs that are delivering interrupts), a
five years old bug is exposed. Running ebizzy benchmark in three 80 vCPUs VMs
on one 80 pCPUs Skylake server, a lot of rcu_sched stall warning splatting
in the VMs after stress testing:
INFO: rcu_sched detected stalls on CPUs/tasks: { 4 41 57 62 77} (detected by 15, t=60004 jiffies, g=899, c=898, q=15073)
Call Trace:
flush_tlb_mm_range+0x68/0x140
tlb_flush_mmu.part.75+0x37/0xe0
tlb_finish_mmu+0x55/0x60
zap_page_range+0x142/0x190
SyS_madvise+0x3cd/0x9c0
system_call_fastpath+0x1c/0x21
swait_active() sustains to be true before finish_swait() is called in
kvm_vcpu_block(), voluntarily preempted vCPUs are taken into account
by kvm_vcpu_on_spin() loop greatly increases the probability condition
kvm_arch_vcpu_runnable(vcpu) is checked and can be true, when APICv
is enabled the yield-candidate vCPU's VMCS RVI field leaks(by
vmx_sync_pir_to_irr()) into spinning-on-a-taken-lock vCPU's current
VMCS.
This patch fixes it by checking conservatively a subset of events.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Marc Zyngier <Marc.Zyngier@arm.com>
Cc: stable@vger.kernel.org
Fixes: 98f4a1467 (KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
preempted_in_kernel is updated in preempt_notifier when involuntary preemption
ocurrs, it can be stale when the voluntarily preempted vCPUs are taken into
account by kvm_vcpu_on_spin() loop. This patch lets it just check preempted_in_kernel
for involuntary preemption.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When fall-through warnings was enabled by default the following warnings
was starting to show up:
../virt/kvm/arm/hyp/vgic-v3-sr.c: In function ‘__vgic_v3_save_aprs’:
../virt/kvm/arm/hyp/vgic-v3-sr.c:351:24: warning: this statement may fall
through [-Wimplicit-fallthrough=]
cpu_if->vgic_ap0r[2] = __vgic_v3_read_ap0rn(2);
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
../virt/kvm/arm/hyp/vgic-v3-sr.c:352:2: note: here
case 6:
^~~~
../virt/kvm/arm/hyp/vgic-v3-sr.c:353:24: warning: this statement may fall
through [-Wimplicit-fallthrough=]
cpu_if->vgic_ap0r[1] = __vgic_v3_read_ap0rn(1);
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
../virt/kvm/arm/hyp/vgic-v3-sr.c:354:2: note: here
default:
^~~~~~~
Rework so that the compiler doesn't warn about fall-through.
Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Renaming docs seems to be en vogue at the moment, so fix on of the
grossly misnamed directories. We usually never use "virtual" as
a shortcut for virtualization in the kernel, but always virt,
as seen in the virt/ top-level directory. Fix up the documentation
to match that.
Fixes: ed16648eb5 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We use "pmc->idx" and the "chained" bitmap to determine if the pmc is
chained, in kvm_pmu_pmc_is_chained(). But idx might be uninitialized
(and random) when we doing this decision, through a KVM_ARM_VCPU_INIT
ioctl -> kvm_pmu_vcpu_reset(). And the test_bit() against this random
idx will potentially hit a KASAN BUG [1].
In general, idx is the static property of a PMU counter that is not
expected to be modified across resets, as suggested by Julien. It
looks more reasonable if we can setup the PMU counter idx for a vcpu
in its creation time. Introduce a new function - kvm_pmu_vcpu_init()
for this basic setup. Oh, and the KASAN BUG will get fixed this way.
[1] https://www.spinics.net/lists/kvm-arm/msg36700.html
Fixes: 80f393a23b ("KVM: arm/arm64: Support chained PMU counters")
Suggested-by: Andrew Murray <andrew.murray@arm.com>
Suggested-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Inspired by commit 9cac38dd5d (KVM/s390: Set preempted flag during
vcpu wakeup and interrupt delivery), we want to also boost not just
lock holders but also vCPUs that are delivering interrupts. Most
smp_call_function_many calls are synchronous, so the IPI target vCPUs
are also good yield candidates. This patch introduces vcpu->ready to
boost vCPUs during wakeup and interrupt delivery time; unlike s390 we do
not reuse vcpu->preempted so that voluntarily preempted vCPUs are taken
into account by kvm_vcpu_on_spin, but vmx_vcpu_pi_put is not affected
(VT-d PI handles voluntary preemption separately, in pi_pre_block).
Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM:
ebizzy -M
vanilla boosting improved
1VM 21443 23520 9%
2VM 2800 8000 180%
3VM 1800 3100 72%
Testing on my Haswell desktop 8 HT, with 8 vCPUs VM 8GB RAM, two VMs,
one running ebizzy -M, the other running 'stress --cpu 2':
w/ boosting + w/o pv sched yield(vanilla)
vanilla boosting improved
1570 4000 155%
w/ boosting + w/ pv sched yield(vanilla)
vanilla boosting improved
1844 5157 179%
w/o boosting, perf top in VM:
72.33% [kernel] [k] smp_call_function_many
4.22% [kernel] [k] call_function_i
3.71% [kernel] [k] async_page_fault
w/ boosting, perf top in VM:
38.43% [kernel] [k] smp_call_function_many
6.31% [kernel] [k] async_page_fault
6.13% libc-2.23.so [.] __memcpy_avx_unaligned
4.88% [kernel] [k] call_function_interrupt
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* support for chained PMU counters in guests
* improved SError handling
* handle Neoverse N1 erratum #1349291
* allow side-channel mitigation status to be migrated
* standardise most AArch64 system register accesses to msr_s/mrs_s
* fix host MPIDR corruption on 32bit
* selftests ckleanups
x86:
* PMU event {white,black}listing
* ability for the guest to disable host-side interrupt polling
* fixes for enlightened VMCS (Hyper-V pv nested virtualization),
* new hypercall to yield to IPI target
* support for passing cstate MSRs through to the guest
* lots of cleanups and optimizations
Generic:
* Some txt->rST conversions for the documentation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdJzdIAAoJEL/70l94x66DQDoH/i83/8kX4I8AWDlushPru4ts
Q4lCE5VAPha+o4pLb1dtfFL3gTmSbsB1N++JSlqK3JOo6LphIOy6b0wBjQBbAa6U
3CT1dJaHJoScLLj09vyBlvClGUH2ZKEQTWOiquCCf7JfPofxwPUA6vJ7TYsdkckx
zR3ygbADWmnfS7hFfiqN3JzuYh9eoooGNWSU+Giq6VF41SiL3IqhBGZhWS0zE9c2
2c5lpqqdeHmAYNBqsyzNiDRKp7+zLFSmZ7Z5/0L755L8KYwR6F5beTnmBMHvb4lA
PWH/SWOC8EYR+PEowfrH+TxKZwp0gMn1kcAKjilHk0uCRwG1IzuHAr2jlNxICCk=
=t/Oq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- support for chained PMU counters in guests
- improved SError handling
- handle Neoverse N1 erratum #1349291
- allow side-channel mitigation status to be migrated
- standardise most AArch64 system register accesses to msr_s/mrs_s
- fix host MPIDR corruption on 32bit
- selftests ckleanups
x86:
- PMU event {white,black}listing
- ability for the guest to disable host-side interrupt polling
- fixes for enlightened VMCS (Hyper-V pv nested virtualization),
- new hypercall to yield to IPI target
- support for passing cstate MSRs through to the guest
- lots of cleanups and optimizations
Generic:
- Some txt->rST conversions for the documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (128 commits)
Documentation: virtual: Add toctree hooks
Documentation: kvm: Convert cpuid.txt to .rst
Documentation: virtual: Convert paravirt_ops.txt to .rst
KVM: x86: Unconditionally enable irqs in guest context
KVM: x86: PMU Event Filter
kvm: x86: Fix -Wmissing-prototypes warnings
KVM: Properly check if "page" is valid in kvm_vcpu_unmap
KVM: arm/arm64: Initialise host's MPIDRs by reading the actual register
KVM: LAPIC: Retry tune per-vCPU timer_advance_ns if adaptive tuning goes insane
kvm: LAPIC: write down valid APIC registers
KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s
KVM: doc: Add API documentation on the KVM_REG_ARM_WORKAROUNDS register
KVM: arm/arm64: Add save/restore support for firmware workaround state
arm64: KVM: Propagate full Spectre v2 workaround state to KVM guests
KVM: arm/arm64: Support chained PMU counters
KVM: arm/arm64: Remove pmc->bitmask
KVM: arm/arm64: Re-create event when setting counter value
KVM: arm/arm64: Extract duplicated code to own function
KVM: arm/arm64: Rename kvm_pmu_{enable/disable}_counter functions
KVM: LAPIC: ARBPRI is a reserved register for x2APIC
...
The PTE allocations in arm64 are identical to the generic ones modulo the
GFP flags.
Using the generic pte_alloc_one() functions ensures that the user page
tables are allocated with __GFP_ACCOUNT set.
The arm64 definition of PGALLOC_GFP is removed and replaced with
GFP_PGTABLE_USER for p[gum]d_alloc_one() for the user page tables and
GFP_PGTABLE_KERNEL for the kernel page tables. The KVM memory cache is now
using GFP_PGTABLE_USER.
The mappings created with create_pgd_mapping() are now using
GFP_PGTABLE_KERNEL.
The conversion to the generic version of pte_free_kernel() removes the NULL
check for pte.
The pte_free() version on arm64 is identical to the generic one and
can be simply dropped.
[cai@lca.pw: fix a bogus GFP flag in pgd_alloc()]
Link: https://lore.kernel.org/r/1559656836-24940-1-git-send-email-cai@lca.pw/
[and fix it more]
Link: https://lore.kernel.org/linux-mm/20190617151252.GF16810@rapoport-lnx/
Link: http://lkml.kernel.org/r/1557296232-15361-5-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add support for chained PMU counters in guests
- Improve SError handling
- Handle Neoverse N1 erratum #1349291
- Allow side-channel mitigation status to be migrated
- Standardise most AArch64 system register accesses to msr_s/mrs_s
- Fix host MPIDR corruption on 32bit
-----BEGIN PGP SIGNATURE-----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=yfCs
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm updates for 5.3
- Add support for chained PMU counters in guests
- Improve SError handling
- Handle Neoverse N1 erratum #1349291
- Allow side-channel mitigation status to be migrated
- Standardise most AArch64 system register accesses to msr_s/mrs_s
- Fix host MPIDR corruption on 32bit
The field "page" is initialized to KVM_UNMAPPED_PAGE when it is not used
(i.e. when the memory lives outside kernel control). So this check will
always end up using kunmap even for memremap regions.
Fixes: e45adf665a ("KVM: Introduce a new guest mapping API")
Cc: stable@vger.kernel.org
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As part of setting up the host context, we populate its
MPIDR by using cpu_logical_map(). It turns out that contrary
to arm64, cpu_logical_map() on 32bit ARM doesn't return the
*full* MPIDR, but a truncated version.
This leaves the host MPIDR slightly corrupted after the first
run of a VM, since we won't correctly restore the MPIDR on
exit. Oops.
Since we cannot trust cpu_logical_map(), let's adopt a different
strategy. We move the initialization of the host CPU context as
part of the per-CPU initialization (which, in retrospect, makes
a lot of sense), and directly read the MPIDR from the HW. This
is guaranteed to work on both arm and arm64.
Reported-by: Andre Przywara <Andre.Przywara@arm.com>
Tested-by: Andre Przywara <Andre.Przywara@arm.com>
Fixes: 32f1395519 ("arm/arm64: KVM: Statically configure the host's view of MPIDR")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Currently, the {read,write}_sysreg_el*() accessors for accessing
particular ELs' sysregs in the presence of VHE rely on some local
hacks and define their system register encodings in a way that is
inconsistent with the core definitions in <asm/sysreg.h>.
As a result, it is necessary to add duplicate definitions for any
system register that already needs a definition in sysreg.h for
other reasons.
This is a bit of a maintenance headache, and the reasons for the
_el*() accessors working the way they do is a bit historical.
This patch gets rid of the shadow sysreg definitions in
<asm/kvm_hyp.h>, converts the _el*() accessors to use the core
__msr_s/__mrs_s interface, and converts all call sites to use the
standard sysreg #define names (i.e., upper case, with SYS_ prefix).
This patch will conflict heavily anyway, so the opportunity
to clean up some bad whitespace in the context of the changes is
taken.
The change exposes a few system registers that have no sysreg.h
definition, due to msr_s/mrs_s being used in place of msr/mrs:
additions are made in order to fill in the gaps.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://www.spinics.net/lists/kvm-arm/msg31717.html
[Rebased to v4.21-rc1]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
[Rebased to v5.2-rc5, changelog updates]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
KVM implements the firmware interface for mitigating cache speculation
vulnerabilities. Guests may use this interface to ensure mitigation is
active.
If we want to migrate such a guest to a host with a different support
level for those workarounds, migration might need to fail, to ensure that
critical guests don't loose their protection.
Introduce a way for userland to save and restore the workarounds state.
On restoring we do checks that make sure we don't downgrade our
mitigation level.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Recent commits added the explicit notion of "workaround not required" to
the state of the Spectre v2 (aka. BP_HARDENING) workaround, where we
just had "needed" and "unknown" before.
Export this knowledge to the rest of the kernel and enhance the existing
kvm_arm_harden_branch_predictor() to report this new state as well.
Export this new state to guests when they use KVM's firmware interface
emulation.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
ARMv8 provides support for chained PMU counters, where an event type
of 0x001E is set for odd-numbered counters, the event counter will
increment by one for each overflow of the preceding even-numbered
counter. Let's emulate this in KVM by creating a 64 bit perf counter
when a user chains two emulated counters together.
For chained events we only support generating an overflow interrupt
on the high counter. We use the attributes of the low counter to
determine the attributes of the perf event.
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We currently use pmc->bitmask to determine the width of the pmc - however
it's superfluous as the pmc index already describes if the pmc is a cycle
counter or event counter. The architecture clearly describes the widths of
these counters.
Let's remove the bitmask to simplify the code.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The perf event sample_period is currently set based upon the current
counter value, when PMXEVTYPER is written to and the perf event is created.
However the user may choose to write the type before the counter value in
which case sample_period will be set incorrectly. Let's instead decouple
event creation from PMXEVTYPER and (re)create the event in either
suitation.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Let's reduce code duplication by extracting common code to its own
function.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The kvm_pmu_{enable/disable}_counter functions can enable/disable
multiple counters at once as they operate on a bitmask. Let's
make this clearer by renaming the function.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update for
5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that
were "easy" to determine by pattern matching. The ones after this are
going to be a bit more difficult and the people on the spdx list will be
discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud, always
nice to see in a diffstat.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXQyQYA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymnGQCghETUBotn1p3hTjY56VEs6dGzpHMAnRT0m+lv
kbsjBGEJpLbMRB2krnaU
=RMcT
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
for nested state save/restore.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdC7NHAAoJEL/70l94x66DHm0H/R8L80sWe1OJbHHK8caPpwm2
mPt6JNcG/ysbG/uoMuVsdRAjZsg9l8JZB9xfA2m/ZPQQThjSG/WX0rU+gWMMI3X8
8ZbN4BCFoiNpOzOkhmStwzMWnvovKvMfhFW0BAI3HLUfM9A+XyVvNM/JbLOvEMRk
WB2SxYRc38ZvIbi8eXgsoFrVyLFB2Fj/0jps4FbKnkjkl37PTDehYLWQ1pt9KsWS
2KdGoXm7/18ottqf0DPfLe0hiiiDuK3akKz7WQBMsAJHi4Fm5j39NuseeRdlablk
uE4vM/sVaLn4xwM9JfrsBl9TzZ2qHsOTRlMQG4iNWjEAuPKa45lt0Jo7OBs6DSY=
=Lzxe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Fixes for ARM and x86, plus selftest patches and nicer structs for
nested state save/restore"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: reorganize initial steps of vmx_set_nested_state
KVM: arm/arm64: Fix emulated ptimer irq injection
tests: kvm: Check for a kernel warning
kvm: tests: Sort tests in the Makefile alphabetically
KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT
KVM: x86: Modify struct kvm_nested_state to have explicit fields for data
KVM: fix typo in documentation
KVM: nVMX: use correct clean fields when copying from eVMCS
KVM: arm/arm64: vgic: Fix kvm_device leak in vgic_its_destroy
KVM: arm64: Filter out invalid core register IDs in KVM_GET_REG_LIST
KVM: arm64: Implement vq_present() as a macro
- SVE cleanup killing a warning with ancient GCC versions
- Don't report non-existent system registers to userspace
- Fix memory leak when freeing the vgic ITS
- Properly lower the interrupt on the emulated physical timer
-----BEGIN PGP SIGNATURE-----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=8ttW
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-for-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.2, take #2
- SVE cleanup killing a warning with ancient GCC versions
- Don't report non-existent system registers to userspace
- Fix memory leak when freeing the vgic ITS
- Properly lower the interrupt on the emulated physical timer
Based on 1 normalized pattern(s):
this file is free software you can redistribute it and or modify it
under the terms of version 2 of the gnu general public license as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin st fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 8 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081207.443595178@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this work is licensed under the terms of the gnu gpl version 2 see
the copying file in the top level directory
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 35 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.797835076@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The emulated ptimer needs to track the level changes, otherwise the
the interrupt will never get deasserted, resulting in the guest getting
stuck in an interrupt storm if it enables ptimer interrupts. This was
found with kvm-unit-tests; the ptimer tests hung as soon as interrupts
were enabled. Typical Linux guests don't have a problem as they prefer
using the virtual timer.
Fixes: bee038a674 ("KVM: arm/arm64: Rework the timer code to use a timer_map")
Signed-off-by: Andrew Jones <drjones@redhat.com>
[Simplified the patch to res we only care about emulated timers here]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but vgic_its_destroy() is not currently doing this,
resulting in a memory leak, resulting in kmemleak reports such as
the following:
unreferenced object 0xffff800aeddfe280 (size 128):
comm "qemu-system-aar", pid 13799, jiffies 4299827317 (age 1569.844s)
[...]
backtrace:
[<00000000a08b80e2>] kmem_cache_alloc+0x178/0x208
[<00000000dcad2bd3>] kvm_vm_ioctl+0x350/0xbc0
Fix it.
Cc: Andre Przywara <andre.przywara@arm.com>
Fixes: 1085fdc68c ("KVM: arm64: vgic-its: Introduce new KVM ITS device")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 136 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 33 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000435.254582722@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation 51 franklin street fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 67 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141333.953658117@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It doesn't seem as if there is any particular need for kvm_lock to be a
spinlock, so convert the lock to a mutex so that sleepable functions (in
particular cond_resched()) can be called while holding it.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a wrapper to invoke kvm_arch_check_processor_compat() so that the
boilerplate ugliness of checking virtualization support on all CPUs is
hidden from the arch specific code. x86's implementation in particular
is quite heinous, as it unnecessarily propagates the out-param pattern
into kvm_x86_ops.
While the x86 specific issue could be resolved solely by changing
kvm_x86_ops, make the change for all architectures as returning a value
directly is prettier and technically more robust, e.g. s390 doesn't set
the out param, which could lead to subtle breakage in the (highly
unlikely) scenario where the out-param was not pre-initialized by the
caller.
Opportunistically annotate svm_check_processor_compat() with __init.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJc85ibAAoJEL/70l94x66D72gH/iaXjRF9uqGSnd1/JLHIawfb
oH0VQS24tBzRlFREBTA68IxThgjTmSS+yHcAXSO7JmxztjGq3ZWiNaidQIvC1reu
t4MJMvf7ZZa7Yq0OAy2jwVAkZMKk5P8hBjjI5N7pEBb4ApJHzsCHV+KEIe5loc+q
f5LYLR53keImJ40wxh/qFftNNlYJUMv6tWa8y0mrlBrKABOvdRYFswhqcnEPibi9
cPoHDS6Ep/34eAVQzqHzfDbjezpa342SSw6s66Vpb/qYJyxoUh1Mw+9YCmAWanS8
vuvXz4qjCFvLRrmc9ctASUTEVydqx8IdcKQGiteWgpSrl4kgy6nLMZDY5sbq8UM=
=Bgfn
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Fixes for PPC and s390"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: PPC: Book3S HV: Restore SPRG3 in kvmhv_p9_guest_entry()
KVM: PPC: Book3S HV: Fix lockdep warning when entering guest on POWER9
KVM: PPC: Book3S HV: XIVE: Fix page offset when clearing ESB pages
KVM: PPC: Book3S HV: XIVE: Take the srcu read lock when accessing memslots
KVM: PPC: Book3S HV: XIVE: Do not clear IRQ data of passthrough interrupts
KVM: PPC: Book3S HV: XIVE: Introduce a new mutex for the XIVE device
KVM: PPC: Book3S HV: XIVE: Fix the enforced limit on the vCPU identifier
KVM: PPC: Book3S HV: XIVE: Do not test the EQ flag validity when resetting
KVM: PPC: Book3S HV: XIVE: Clear file mapping when device is released
KVM: PPC: Book3S HV: Don't take kvm->lock around kvm_for_each_vcpu
KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list
KVM: PPC: Book3S HV: Use new mutex to synchronize MMU setup
KVM: PPC: Book3S HV: Avoid touching arch.mmu_ready in XIVE release functions
KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_ID
kvm: fix compile on s390 part 2
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KVM_CAP_MAX_VCPU_ID is currently always reporting KVM_MAX_VCPU_ID on all
architectures. However, on s390x, the amount of usable CPUs is determined
during runtime - it is depending on the features of the machine the code
is running on. Since we are using the vcpu_id as an index into the SCA
structures that are defined by the hardware (see e.g. the sca_add_vcpu()
function), it is not only the amount of CPUs that is limited by the hard-
ware, but also the range of IDs that we can use.
Thus KVM_CAP_MAX_VCPU_ID must be determined during runtime on s390x, too.
So the handling of KVM_CAP_MAX_VCPU_ID has to be moved from the common
code into the architecture specific code, and on s390x we have to return
the same value here as for KVM_CAP_MAX_VCPUS.
This problem has been discovered with the kvm_create_max_vcpus selftest.
With this change applied, the selftest now passes on s390x, too.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190523164309.13345-9-thuth@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We also need to fence the memunmap part.
Fixes: e45adf665a ("KVM: Introduce a new guest mapping API")
Fixes: d30b214d1d (kvm: fix compilation on s390)
Cc: Michal Kubecek <mkubecek@suse.cz>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
merge window, but should not wait four months before they appear in
a release. I also travelled a bit more than usual in the first part
of May, which didn't help with picking up patches and reports promptly.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJc6RkmAAoJEL/70l94x66DhEAH/ijCkibV9vOUu8n/lSxMjAzi
I/Y1VEaVRFuQ6u0QSjWBBg22tVsWuWiVbonJ63w3JMRwi5Q5zW9REE7EaKRAa/eC
FiFE7vTesYh6sGVwdMCwoinjMDyCp7hybvtBc608+MWhVmrdzTYtPm5N85wxIDtW
xH5Kr2mVeLC43X3vfegolmXZ1obAbZEToJvOgJrYFhnzsmVYYl182kfGtrppBoO0
XXDPuDRGpTrm6A2oADMdOv+mT9p51pHsedmHQaDGXwAGEC/BkOGKdIdBfwppEwy7
QP2NGqwkHIyghV1aCPacT6O6G6xL0i2rfvlJ7+e6o7deU4uMXAqIdQ2DbIcHy3g=
=5IW2
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"The usual smattering of fixes and tunings that came in too late for
the merge window, but should not wait four months before they appear
in a release.
I also travelled a bit more than usual in the first part of May, which
didn't help with picking up patches and reports promptly"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (33 commits)
KVM: x86: fix return value for reserved EFER
tools/kvm_stat: fix fields filter for child events
KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard
kvm: selftests: aarch64: compile with warnings on
kvm: selftests: aarch64: fix default vm mode
kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size
KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION
KVM: x86/pmu: do not mask the value that is written to fixed PMUs
KVM: x86/pmu: mask the result of rdpmc according to the width of the counters
x86/kvm/pmu: Set AMD's virt PMU version to 1
KVM: x86: do not spam dmesg with VMCS/VMCB dumps
kvm: Check irqchip mode before assign irqfd
kvm: svm/avic: fix off-by-one in checking host APIC ID
KVM: selftests: do not blindly clobber registers in guest asm
KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c
KVM: LAPIC: Expose per-vCPU timer_advance_ns to userspace
KVM: LAPIC: Fix lapic_timer_advance_ns parameter overflow
kvm: vmx: Fix -Wmissing-prototypes warnings
KVM: nVMX: Fix using __this_cpu_read() in preemptible context
kvm: fix compilation on s390
...
When assigning kvm irqfd we didn't check the irqchip mode but we allow
KVM_IRQFD to succeed with all the irqchip modes. However it does not
make much sense to create irqfd even without the kernel chips. Let's
provide a arch-dependent helper to check whether a specific irqfd is
allowed by the arch. At least for x86, it should make sense to check:
- when irqchip mode is NONE, all irqfds should be disallowed, and,
- when irqchip mode is SPLIT, irqfds that are with resamplefd should
be disallowed.
For either of the case, previously we'll silently ignore the irq or
the irq ack event if the irqchip mode is incorrect. However that can
cause misterious guest behaviors and it can be hard to triage. Let's
fail KVM_IRQFD even earlier to detect these incorrect configurations.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Radim Krčmář <rkrcmar@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARNING: CPU: 0 PID: 13554 at kvm/arch/x86/kvm//../../../virt/kvm/kvm_main.c:4183 kvm_resume+0x3c/0x40 [kvm]
CPU: 0 PID: 13554 Comm: step_after_susp Tainted: G OE 5.1.0-rc4+ #1
RIP: 0010:kvm_resume+0x3c/0x40 [kvm]
Call Trace:
syscore_resume+0x63/0x2d0
suspend_devices_and_enter+0x9d1/0xa40
pm_suspend+0x33a/0x3b0
state_store+0x82/0xf0
kobj_attr_store+0x12/0x20
sysfs_kf_write+0x4b/0x60
kernfs_fop_write+0x120/0x1a0
__vfs_write+0x1b/0x40
vfs_write+0xcd/0x1d0
ksys_write+0x5f/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x6f/0x6c0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Commit ca84d1a24 (KVM: x86: Add clock sync request to hardware enable) mentioned
that "we always hold kvm_lock when hardware_enable is called. The one place that
doesn't need to worry about it is resume, as resuming a frozen CPU, the spinlock
won't be taken." However, commit 6706dae9 (virt/kvm: Replace spin_is_locked() with
lockdep) introduces a bug, it asserts when the lock is not held which is contrary
to the original goal.
This patch fixes it by WARN_ON when the lock is held.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Fixes: 6706dae9 ("virt/kvm: Replace spin_is_locked() with lockdep")
[Wrap with #ifdef CONFIG_LOCKDEP - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM has helpers to handle the condition codes of trapped aarch32
instructions. These are marked __hyp_text and used from HYP, but they
aren't built by the 'hyp' Makefile, which has all the runes to avoid ASAN
and KCOV instrumentation.
Move this code to a new hyp/aarch32.c to avoid a hyp-panic when starting
an aarch32 guest on a host built with the ASAN/KCOV debug options.
Fixes: 021234ef37 ("KVM: arm64: Make kvm_condition_valid32() accessible from EL2")
Fixes: 8cebe750c4 ("arm64: KVM: Make kvm_skip_instr32 available to HYP")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* POWER: support for direct access to the POWER9 XIVE interrupt controller,
memory and performance optimizations.
* x86: support for accessing memory not backed by struct page, fixes and refactoring
* Generic: dirty page tracking improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJc3qV/AAoJEL/70l94x66Dn3QH/jX1Bn0P/RZAIt4w0SySklSg
PqxUKDyBQqB9vN9Qeb9jWXAKPH2CtM3+up/rz7oRnBWp7qA6vXcC/R/QJYAvzdXE
nklsR/oYCsflR1KdlVYuDvvPCPP2fLBU5zfN83OsaBQ8fNRkm3gN+N5XQ2SbXbLy
Mo9tybS4otY201UAC96e8N0ipwwyCRpDneQpLcl+F5nH3RBt63cVbs04O+70MXn7
eT4I+8K3+Go7LATzT8hglD21D/7uvE31qQb6yr5L33IfhU4GB51RZzBXTNaAdY8n
hT1rMrRkAMAFWYZPQDfoMadjWU3i5DIfstKjDxOr9oTfuOEp5Z+GvJwvVnUDg1I=
=D0+p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- support for SVE and Pointer Authentication in guests
- PMU improvements
POWER:
- support for direct access to the POWER9 XIVE interrupt controller
- memory and performance optimizations
x86:
- support for accessing memory not backed by struct page
- fixes and refactoring
Generic:
- dirty page tracking improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (155 commits)
kvm: fix compilation on aarch64
Revert "KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU"
kvm: x86: Fix L1TF mitigation for shadow MMU
KVM: nVMX: Disable intercept for FS/GS base MSRs in vmcs02 when possible
KVM: PPC: Book3S: Remove useless checks in 'release' method of KVM device
KVM: PPC: Book3S HV: XIVE: Fix spelling mistake "acessing" -> "accessing"
KVM: PPC: Book3S HV: Make sure to load LPID for radix VCPUs
kvm: nVMX: Set nested_run_pending in vmx_set_nested_state after checks complete
tests: kvm: Add tests for KVM_SET_NESTED_STATE
KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state
tests: kvm: Add tests for KVM_CAP_MAX_VCPUS and KVM_CAP_MAX_CPU_ID
tests: kvm: Add tests to .gitignore
KVM: Introduce KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2
KVM: Fix kvm_clear_dirty_log_protect off-by-(minus-)one
KVM: Fix the bitmap range to copy during clear dirty
KVM: arm64: Fix ptrauth ID register masking logic
KVM: x86: use direct accessors for RIP and RSP
KVM: VMX: Use accessors for GPRs outside of dedicated caching logic
KVM: x86: Omit caching logic for always-available GPRs
kvm, x86: Properly check whether a pfn is an MMIO or not
...
Commit e45adf665a ("KVM: Introduce a new guest mapping API", 2019-01-31)
introduced a build failure on aarch64 defconfig:
$ make -j$(nproc) ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- O=out defconfig \
Image.gz
...
../arch/arm64/kvm/../../../virt/kvm/kvm_main.c:
In function '__kvm_map_gfn':
../arch/arm64/kvm/../../../virt/kvm/kvm_main.c:1763:9: error:
implicit declaration of function 'memremap'; did you mean 'memset_p'?
../arch/arm64/kvm/../../../virt/kvm/kvm_main.c:1763:46: error:
'MEMREMAP_WB' undeclared (first use in this function)
../arch/arm64/kvm/../../../virt/kvm/kvm_main.c:
In function 'kvm_vcpu_unmap':
../arch/arm64/kvm/../../../virt/kvm/kvm_main.c:1795:3: error:
implicit declaration of function 'memunmap'; did you mean 'vm_munmap'?
because these functions are declared in <linux/io.h> rather than <asm/io.h>,
and the former was being pulled in already on x86 but not on aarch64.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- guest SVE support
- guest Pointer Authentication support
- Better discrimination of perf counters between host and guests
-----BEGIN PGP SIGNATURE-----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=fjph
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm updates for 5.2
- guest SVE support
- guest Pointer Authentication support
- Better discrimination of perf counters between host and guests
Conflicts:
include/uapi/linux/kvm.h
- Fix a bug, fix a spelling mistake, remove some useless code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJc2kTEAAoJEJ2a6ncsY3GfS88IAImcIlKXMvzSKtHFxGpRap17
9LTZs5MQAUZHVMFJXmrJLBgogtGxUw53aX53woeyerytZsoGU4+YzwgLhk4XBEzA
5Kt5ahlxu82sa2ThH1zyLlNWFXiTECgD5ErNTdavLbNlaKE8YG160+65/mSyixGz
vs5wLSYGv/37no1ay6PIZ3DtwqdrYq5nJbuG+ZsaamUHPJOGprqHqg0gaTJ877NZ
yQDUS7OVuEJ1pdUUK/elP+cnlqR9smaP5OUNsXYMHWJgPJMjc27/thBJy93iS1kk
/zKQ8AFmxqoaePnR7ymTbqurfFFHBiSavUmyWopSQppNHCf4DDE8XjLs9MXKez8=
=Lco4
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
PPC KVM update for 5.2
* Support for guests to access the new POWER9 XIVE interrupt controller
hardware directly, reducing interrupt latency and overhead for guests.
* In-kernel implementation of the H_PAGE_INIT hypercall.
* Reduce memory usage of sparsely-populated IOMMU tables.
* Several bug fixes.
Second PPC KVM update for 5.2
* Fix a bug, fix a spelling mistake, remove some useless code.
Use the mmu_notifier_range_blockable() helper function instead of directly
dereferencing the range->blockable field. This is done to make it easier
to change the mmu_notifier range field.
This patch is the outcome of the following coccinelle patch:
%<-------------------------------------------------------------------
@@
identifier I1, FN;
@@
FN(..., struct mmu_notifier_range *I1, ...) {
<...
-I1->blockable
+mmu_notifier_range_blockable(I1)
...>
}
------------------------------------------------------------------->%
spatch --in-place --sp-file blockable.spatch --dir .
Link: http://lkml.kernel.org/r/20190326164747.24405-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no need to test for the device pointer validity when releasing
a KVM device. The file descriptor should identify it safely.
Fixes: 2bde9b3ec8 ("KVM: Introduce a 'release' method for KVM devices")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The previous KVM_CAP_MANUAL_DIRTY_LOG_PROTECT has some problem which
blocks the correct usage from userspace. Obsolete the old one and
introduce a new capability bit for it.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just imaging the case where num_pages < BITS_PER_LONG, then the loop
will be skipped while it shouldn't.
Signed-off-by: Peter Xu <peterx@redhat.com>
Fixes: 2a31b9db15
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_dirty_bitmap_bytes() will return the size of the dirty bitmap of
the memslot rather than the size of bitmap passed over from the ioctl.
Here for KVM_CLEAR_DIRTY_LOG we should only copy exactly the size of
bitmap that covers kvm_clear_dirty_log.num_pages.
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 2a31b9db15
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mostly just incremental improvements here:
- Introduce AT_HWCAP2 for advertising CPU features to userspace
- Expose SVE2 availability to userspace
- Support for "data cache clean to point of deep persistence" (DC PODP)
- Honour "mitigations=off" on the cmdline and advertise status via sysfs
- CPU timer erratum workaround (Neoverse-N1 #1188873)
- Introduce perf PMU driver for the SMMUv3 performance counters
- Add config option to disable the kuser helpers page for AArch32 tasks
- Futex modifications to ensure liveness under contention
- Rework debug exception handling to seperate kernel and user handlers
- Non-critical fixes and cleanup
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlzMFGgACgkQt6xw3ITB
YzTicAf/TX1h1+ecbx4WJAa4qeiOCPoNpG9efldQumqJhKL44MR5bkhuShna5mwE
ptm5qUXkZCxLTjzssZKnbdbgwa3t+emW8Of3D91IfI9akiZbMoDx5FGgcNbqjazb
RLrhOFHwgontA38yppZN+DrL+sXbvif/CVELdHahkEx6KepSGaS2lmPXRmz/W56v
4yIRy/zxc3Dhjgfm3wKh72nBwoZdLiIc4mchd5pthNlR9E2idrYkQegG1C+gA00r
o8uZRVOWgoh7H+QJE+xLUc8PaNCg8xqRRXOuZYg9GOz6hh7zSWhm+f1nRz9S2tIR
gIgsCHNqoO2I3E1uJpAQXDGtt2kFhA==
=ulpJ
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Mostly just incremental improvements here:
- Introduce AT_HWCAP2 for advertising CPU features to userspace
- Expose SVE2 availability to userspace
- Support for "data cache clean to point of deep persistence" (DC PODP)
- Honour "mitigations=off" on the cmdline and advertise status via
sysfs
- CPU timer erratum workaround (Neoverse-N1 #1188873)
- Introduce perf PMU driver for the SMMUv3 performance counters
- Add config option to disable the kuser helpers page for AArch32 tasks
- Futex modifications to ensure liveness under contention
- Rework debug exception handling to seperate kernel and user
handlers
- Non-critical fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
Documentation: Add ARM64 to kernel-parameters.rst
arm64/speculation: Support 'mitigations=' cmdline option
arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB
arm64: enable generic CPU vulnerabilites support
arm64: add sysfs vulnerability show for speculative store bypass
arm64: Fix size of __early_cpu_boot_status
clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters
clocksource/arm_arch_timer: Remove use of workaround static key
clocksource/arm_arch_timer: Drop use of static key in arch_timer_reg_read_stable
clocksource/arm_arch_timer: Direcly assign set_next_event workaround
arm64: Use arch_timer_read_counter instead of arch_counter_get_cntvct
watchdog/sbsa: Use arch_timer_read_counter instead of arch_counter_get_cntvct
ARM: vdso: Remove dependency with the arch_timer driver internals
arm64: Apply ARM64_ERRATUM_1188873 to Neoverse-N1
arm64: Add part number for Neoverse N1
arm64: Make ARM64_ERRATUM_1188873 depend on COMPAT
arm64: Restrict ARM64_ERRATUM_1188873 mitigation to AArch32
arm64: mm: Remove pte_unmap_nested()
arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable
arm64: compat: Reduce address limit for 64K pages
...
In KVM, specially for nested guests, there is a dominant pattern of:
=> map guest memory -> do_something -> unmap guest memory
In addition to all this unnecessarily noise in the code due to boiler plate
code, most of the time the mapping function does not properly handle memory
that is not backed by "struct page". This new guest mapping API encapsulate
most of this boiler plate code and also handles guest memory that is not
backed by "struct page".
The current implementation of this API is using memremap for memory that is
not backed by a "struct page" which would lead to a huge slow-down if it
was used for high-frequency mapping operations. The API does not have any
effect on current setups where guest memory is backed by a "struct page".
Further patches are going to also introduce a pfn-cache which would
significantly improve the performance of the memremap case.
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
is_dirty has been renamed to flush, but the comment for it is
outdated. And the description about @flush parameter for
kvm_clear_dirty_log_protect() is missing, add it in this patch
as well.
Signed-off-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a memory slot's size is not a multiple of 64 pages (256K), then
the KVM_CLEAR_DIRTY_LOG API is unusable: clearing the final 64 pages
either requires the requested page range to go beyond memslot->npages,
or requires log->num_pages to be unaligned, and kvm_clear_dirty_log_protect
requires log->num_pages to be both in range and aligned.
To allow this case, allow log->num_pages not to be a multiple of 64 if
it ends exactly on the last page of the slot.
Reported-by: Peter Xu <peterx@redhat.com>
Fixes: 98938aa8ed ("KVM: validate userspace input in kvm_clear_dirty_log_protect()", 2019-01-02)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- VSIE crypto fixes
- new guest features for gen15
- disable halt polling for nested virtualization with overcommit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=mZyZ
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Features and fixes for 5.2
- VSIE crypto fixes
- new guest features for gen15
- disable halt polling for nested virtualization with overcommit
If a memory slot's size is not a multiple of 64 pages (256K), then
the KVM_CLEAR_DIRTY_LOG API is unusable: clearing the final 64 pages
either requires the requested page range to go beyond memslot->npages,
or requires log->num_pages to be unaligned, and kvm_clear_dirty_log_protect
requires log->num_pages to be both in range and aligned.
To allow this case, allow log->num_pages not to be a multiple of 64 if
it ends exactly on the last page of the slot.
Reported-by: Peter Xu <peterx@redhat.com>
Fixes: 98938aa8ed ("KVM: validate userspace input in kvm_clear_dirty_log_protect()", 2019-01-02)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a P9 sPAPR VM boots, the CAS negotiation process determines which
interrupt mode to use (XICS legacy or XIVE native) and invokes a
machine reset to activate the chosen mode.
To be able to switch from one interrupt mode to another, we introduce
the capability to release a KVM device without destroying the VM. The
KVM device interface is extended with a new 'release' method which is
called when the file descriptor of the device is closed.
Once 'release' is called, the 'destroy' method will not be called
anymore as the device is removed from the device list of the VM.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Some KVM devices will want to handle special mappings related to the
underlying HW. For instance, the XIVE interrupt controller of the
POWER9 processor has MMIO pages for thread interrupt management and
for interrupt source control that need to be exposed to the guest when
the OS has the required support.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
There are cases where halt polling is unwanted. For example when running
KVM on an over committed LPAR we rather want to give back the CPU to
neighbour LPARs instead of polling. Let us provide a callback that
allows architectures to disable polling.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When a VCPU never runs before a guest exists, but we set timer registers
up via ioctls, the associated hrtimer might never get cancelled.
Since we moved vcpu_load/put into the arch-specific implementations and
only have load/put for KVM_RUN, we won't ever have a scheduled hrtimer
for emulating a timer when modifying the timer state via an ioctl from
user space. All we need to do is make sure that we pick up the right
state when we load the timer state next time userspace calls KVM_RUN
again.
We also do not need to worry about this interacting with the bg_timer,
because if we were in WFI from the guest, and somehow ended up in a
kvm_arm_timer_set_reg, it means that:
1. the VCPU thread has received a signal,
2. we have called vcpu_load when being scheduled in again,
3. we have called vcpu_put when we returned to userspace for it to issue
another ioctl
And therefore will not have a bg_timer programmed and the event is
treated as a spurious wakeup from WFI if userspace decides to run the
vcpu again even if there are not virtual interrupts.
This fixes stray virtual timer interrupts triggered by an expiring
hrtimer, which happens after a failed live migration, for instance.
Fixes: bee038a674 ("KVM: arm/arm64: Rework the timer code to use a timer_map")
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Reported-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
With commit a80868f398, we no longer ensure that the
THP page is properly aligned in the guest IPA. Skip the stage2
huge mapping for unaligned IPA backed by transparent hugepages.
Fixes: a80868f398 ("KVM: arm/arm64: Enforce PTE mappings at stage2 when needed")
Reported-by: Eric Auger <eric.auger@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Chirstoffer Dall <christoffer.dall@arm.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: Zheng Xiang <zhengxiang9@huawei.com>
Cc: Andrew Murray <andrew.murray@arm.com>
Cc: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
A failed KVM_ARM_VCPU_INIT should not set the vcpu target,
as the vcpu target is used by kvm_vcpu_initialized() to
determine if other vcpu ioctls may proceed. We need to set
the target before calling kvm_reset_vcpu(), but if that call
fails, we should then unset it and clear the feature bitmap
while we're at it.
Signed-off-by: Andrew Jones <drjones@redhat.com>
[maz: Simplified patch, completed commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
With VHE different exception levels are used between the host (EL2) and
guest (EL1) with a shared exception level for userpace (EL0). We can take
advantage of this and use the PMU's exception level filtering to avoid
enabling/disabling counters in the world-switch code. Instead we just
modify the counter type to include or exclude EL0 at vcpu_{load,put} time.
We also ensure that trapped PMU system register writes do not re-enable
EL0 when reconfiguring the backing perf events.
This approach completely avoids blackout windows seen with !VHE.
Suggested-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The virt/arm core allocates a kvm_cpu_context_t percpu, at present this is
a typedef to kvm_cpu_context and is used to store host cpu context. The
kvm_cpu_context structure is also used elsewhere to hold vcpu context.
In order to use the percpu to hold additional future host information we
encapsulate kvm_cpu_context in a new structure and rename the typedef and
percpu to match.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When pointer authentication is supported, a guest may wish to use it.
This patch adds the necessary KVM infrastructure for this to work, with
a semi-lazy context switch of the pointer auth state.
Pointer authentication feature is only enabled when VHE is built
in the kernel and present in the CPU implementation so only VHE code
paths are modified.
When we schedule a vcpu, we disable guest usage of pointer
authentication instructions and accesses to the keys. While these are
disabled, we avoid context-switching the keys. When we trap the guest
trying to use pointer authentication functionality, we change to eagerly
context-switching the keys, and enable the feature. The next time the
vcpu is scheduled out/in, we start again. However the host key save is
optimized and implemented inside ptrauth instruction/register access
trap.
Pointer authentication consists of address authentication and generic
authentication, and CPUs in a system might have varied support for
either. Where support for either feature is not uniform, it is hidden
from guests via ID register emulation, as a result of the cpufeature
framework in the host.
Unfortunately, address authentication and generic authentication cannot
be trapped separately, as the architecture provides a single EL2 trap
covering both. If we wish to expose one without the other, we cannot
prevent a (badly-written) guest from intermittently using a feature
which is not uniformly supported (when scheduled on a physical CPU which
supports the relevant feature). Hence, this patch expects both type of
authentication to be present in a cpu.
This switch of key is done from guest enter/exit assembly as preparation
for the upcoming in-kernel pointer authentication support. Hence, these
key switching routines are not implemented in C code as they may cause
pointer authentication key signing error in some situations.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[Only VHE, key switch in full assembly, vcpu_has_ptrauth checks
, save host key in ptrauth exception trap]
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
[maz: various fixups]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The introduction of kvm_arm_init_arch_resources() looks like
premature factoring, since nothing else uses this hook yet and it
is not clear what will use it in the future.
For now, let's not pretend that this is a general thing:
This patch simply renames the function to kvm_arm_init_sve(),
retaining the arm stub version under the new name.
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
All architectures except MIPS were defining it in the same way,
and memory slots are handled entirely by common code so there
is no point in keeping the definition per-architecture.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARM64 standard pgtable functions are going to use pgtable_page_[ctor|dtor]
or pgtable_pmd_page_[ctor|dtor] constructs. At present KVM guest stage-2
PUD|PMD|PTE level page tabe pages are allocated with __get_free_page()
via mmu_memory_cache_alloc() but released with standard pud|pmd_free() or
pte_free_kernel(). These will fail once they start calling into pgtable_
[pmd]_page_dtor() for pages which never originally went through respective
constructor functions. Hence convert all stage-2 page table page release
functions to call buddy directly while freeing pages.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When disabling LPIs (for example on reset) at the redistributor
level, it is expected that LPIs that was pending in the CPU
interface are eventually retired.
Currently, this is not what is happening, and these LPIs will
stay in the ap_list, eventually being acknowledged by the vcpu
(which didn't quite expect this behaviour).
The fix is thus to retire these LPIs from the list of pending
interrupts as we disable LPIs.
Reported-by: Heyi Guo <guoheyi@huawei.com>
Tested-by: Heyi Guo <guoheyi@huawei.com>
Fixes: 0e4e82f154 ("KVM: arm64: vgic-its: Enable ITS emulation as a virtual MSI controller")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Recently the generic timer test of kvm-unit-tests failed to complete
(stalled) when a physical timer is being used. This issue is caused
by incorrect update of CNTP_CVAL when CNTP_TVAL is being accessed,
introduced by 'Commit 84135d3d18 ("KVM: arm/arm64: consolidate arch
timer trap handlers")'. According to Arm ARM, the read/write behavior
of accesses to the TVAL registers is expected to be:
* READ: TimerValue = (CompareValue – (Counter - Offset)
* WRITE: CompareValue = ((Counter - Offset) + Sign(TimerValue)
This patch fixes the TVAL read/write code path according to the
specification.
Fixes: 84135d3d18 ("KVM: arm/arm64: consolidate arch timer trap handlers")
Signed-off-by: Wei Huang <wei@redhat.com>
[maz: commit message tidy-up]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Some aspects of vcpu configuration may be too complex to be
completed inside KVM_ARM_VCPU_INIT. Thus, there may be a
requirement for userspace to do some additional configuration
before various other ioctls will work in a consistent way.
In particular this will be the case for SVE, where userspace will
need to negotiate the set of vector lengths to be made available to
the guest before the vcpu becomes fully usable.
In order to provide an explicit way for userspace to confirm that
it has finished setting up a particular vcpu feature, this patch
adds a new ioctl KVM_ARM_VCPU_FINALIZE.
When userspace has opted into a feature that requires finalization,
typically by means of a feature flag passed to KVM_ARM_VCPU_INIT, a
matching call to KVM_ARM_VCPU_FINALIZE is now required before
KVM_RUN or KVM_GET_REG_LIST is allowed. Individual features may
impose additional restrictions where appropriate.
No existing vcpu features are affected by this, so current
userspace implementations will continue to work exactly as before,
with no need to issue KVM_ARM_VCPU_FINALIZE.
As implemented in this patch, KVM_ARM_VCPU_FINALIZE is currently a
placeholder: no finalizable features exist yet, so ioctl is not
required and will always yield EINVAL. Subsequent patches will add
the finalization logic to make use of this ioctl for SVE.
No functional change for existing userspace.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch adds a kvm_arm_init_arch_resources() hook to perform
subarch-specific initialisation when starting up KVM.
This will be used in a subsequent patch for global SVE-related
setup on arm64.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
- Fix THP handling in the presence of pre-existing PTEs
- Honor request for PTE mappings even when THPs are available
- GICv4 performance improvement
- Take the srcu lock when writing to guest-controlled ITS data structures
- Reset the virtual PMU in preemptible context
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=mpQX
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/ARM fixes for 5.1
- Fix THP handling in the presence of pre-existing PTEs
- Honor request for PTE mappings even when THPs are available
- GICv4 performance improvement
- Take the srcu lock when writing to guest-controlled ITS data structures
- Reset the virtual PMU in preemptible context
- Various cleanups
The function irqfd_wakeup() has flags defined as __poll_t and then it
has additional flags which is used for irqflags.
Redefine the inner flags variable as iflags so it does not shadow the
outer flags.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM's API requires thats ioctls must be issued from the same process
that created the VM. In other words, userspace can play games with a
VM's file descriptors, e.g. fork(), SCM_RIGHTS, etc..., but only the
creator can do anything useful. Explicitly reject device ioctls that
are issued by a process other than the VM's creator, and update KVM's
API documentation to extend its requirements to device ioctls.
Fixes: 852b6d57dc ("kvm: add device control API")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some comments in virt/kvm/arm/mmu.c are outdated. Update them to
reflect the current state of the code.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[maz: commit message tidy-up]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Fix sparse warnings:
arch/arm64/kvm/../../../virt/kvm/arm/vgic/vgic-its.c:1732:5: warning:
symbol 'vgic_its_has_attr_regs' was not declared. Should it be static?
arch/arm64/kvm/../../../virt/kvm/arm/vgic/vgic-its.c:1753:5: warning:
symbol 'vgic_its_attr_regs_access' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
[maz: fixed subject]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
We rely on the mmu_notifier call backs to handle the split/merge
of huge pages and thus we are guaranteed that, while creating a
block mapping, either the entire block is unmapped at stage2 or it
is missing permission.
However, we miss a case where the block mapping is split for dirty
logging case and then could later be made block mapping, if we cancel the
dirty logging. This not only creates inconsistent TLB entries for
the pages in the the block, but also leakes the table pages for
PMD level.
Handle this corner case for the huge mappings at stage2 by
unmapping the non-huge mapping for the block. This could potentially
release the upper level table. So we need to restart the table walk
once we unmap the range.
Fixes : ad361f093c ("KVM: ARM: Support hugetlbfs backed huge pages")
Reported-by: Zheng Xiang <zhengxiang9@huawei.com>
Cc: Zheng Xiang <zhengxiang9@huawei.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
commit 6794ad5443 ("KVM: arm/arm64: Fix unintended stage 2 PMD mappings")
made the checks to skip huge mappings, stricter. However it introduced
a bug where we still use huge mappings, ignoring the flag to
use PTE mappings, by not reseting the vma_pagesize to PAGE_SIZE.
Also, the checks do not cover the PUD huge pages, that was
under review during the same period. This patch fixes both
the issues.
Fixes : 6794ad5443 ("KVM: arm/arm64: Fix unintended stage 2 PMD mappings")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When halting a guest, QEMU flushes the virtual ITS caches, which
amounts to writing to the various tables that the guest has allocated.
When doing this, we fail to take the srcu lock, and the kernel
shouts loudly if running a lockdep kernel:
[ 69.680416] =============================
[ 69.680819] WARNING: suspicious RCU usage
[ 69.681526] 5.1.0-rc1-00008-g600025238f51-dirty #18 Not tainted
[ 69.682096] -----------------------------
[ 69.682501] ./include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage!
[ 69.683225]
[ 69.683225] other info that might help us debug this:
[ 69.683225]
[ 69.683975]
[ 69.683975] rcu_scheduler_active = 2, debug_locks = 1
[ 69.684598] 6 locks held by qemu-system-aar/4097:
[ 69.685059] #0: 0000000034196013 (&kvm->lock){+.+.}, at: vgic_its_set_attr+0x244/0x3a0
[ 69.686087] #1: 00000000f2ed935e (&its->its_lock){+.+.}, at: vgic_its_set_attr+0x250/0x3a0
[ 69.686919] #2: 000000005e71ea54 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[ 69.687698] #3: 00000000c17e548d (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[ 69.688475] #4: 00000000ba386017 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[ 69.689978] #5: 00000000c2c3c335 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0
[ 69.690729]
[ 69.690729] stack backtrace:
[ 69.691151] CPU: 2 PID: 4097 Comm: qemu-system-aar Not tainted 5.1.0-rc1-00008-g600025238f51-dirty #18
[ 69.691984] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019
[ 69.692831] Call trace:
[ 69.694072] lockdep_rcu_suspicious+0xcc/0x110
[ 69.694490] gfn_to_memslot+0x174/0x190
[ 69.694853] kvm_write_guest+0x50/0xb0
[ 69.695209] vgic_its_save_tables_v0+0x248/0x330
[ 69.695639] vgic_its_set_attr+0x298/0x3a0
[ 69.696024] kvm_device_ioctl_attr+0x9c/0xd8
[ 69.696424] kvm_device_ioctl+0x8c/0xf8
[ 69.696788] do_vfs_ioctl+0xc8/0x960
[ 69.697128] ksys_ioctl+0x8c/0xa0
[ 69.697445] __arm64_sys_ioctl+0x28/0x38
[ 69.697817] el0_svc_common+0xd8/0x138
[ 69.698173] el0_svc_handler+0x38/0x78
[ 69.698528] el0_svc+0x8/0xc
The fix is to obviously take the srcu lock, just like we do on the
read side of things since bf308242ab. One wonders why this wasn't
fixed at the same time, but hey...
Fixes: bf308242ab ("KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Sean Christopherson
Paolo Bonzini
Marc Zyngier
Peter Xu
Jay Zhou
KarimAllah Ahmed
Mark Rutland
Zhuang Yanying
Jeremy Cline
Boris Ostrovsky
Alexandru Elisei
Eric Auger
James Morse
Gavin Shan
Milan Pandurov
Miaohe Lin
Zenghui Yu
YueHaibing
Shannon Zhao
Christoffer Dall
Jia He
Radim Krčmář
Linus Torvalds
Thomas Gleixner
Junaid Shahid
Jim Mattson
Wanpeng Li
Steven Price
Matt Delco
Heyi Guo
Will Deacon
Andre Przywara
Andrew Jones
Greg KH
Anders Roxell
Christoph Hellwig
Mike Rapoport
Marc Zyngier
Dave Martin
Andrew Murray
Gustavo A. R. Silva
Thomas Huth
Christian Borntraeger
Jérôme Glisse
Cédric Le Goater
Jiang Biao
Suzuki K Poulose
Anshuman Khandual
Wei Huang
Sebastian Andrzej Siewior