Граф коммитов

32 Коммитов

Автор SHA1 Сообщение Дата
Mark Brown 366624ba7a ASoC: Remove unused WM8974 private data
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-17 12:10:18 +01:00
Mark Brown af3751a0bf ASoC: Remove unneeded control_data management from Wolfson drivers
Now soc-cache.c can figure out the I2C and SPI control data from the
device for the CODEC we don't need to manually assign it in drivers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12 14:00:19 +01:00
Liam Girdwood f0fba2ad1b ASoC: multi-component - ASoC Multi-Component Support
This patch extends the ASoC API to allow sound cards to have more than one
CODEC and more than one platform DMA controller. This is achieved by dividing
some current ASoC structures that contain both driver data and device data into
structures that only either contain device data or driver data. i.e.

 struct snd_soc_codec    --->  struct snd_soc_codec (device data)
                          +->  struct snd_soc_codec_driver (driver data)

 struct snd_soc_platform --->  struct snd_soc_platform (device data)
                          +->  struct snd_soc_platform_driver (driver data)

 struct snd_soc_dai      --->  struct snd_soc_dai (device data)
                          +->  struct snd_soc_dai_driver (driver data)

 struct snd_soc_device   --->  deleted

This now allows ASoC to be more tightly aligned with the Linux driver model and
also means that every ASoC codec, platform and (platform) DAI is a kernel
device. ASoC component private data is now stored as device private data.

The ASoC sound card struct snd_soc_card has also been updated to store lists
of it's components rather than a pointer to a codec and platform. The PCM
runtime struct soc_pcm_runtime now has pointers to all its components.

This patch adds DAPM support for ASoC multi-component and removes struct
snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec
or runtime PCM level basis rather than using snd_soc_socdev.

Other notable multi-component changes:-

 * Stream operations now de-reference less structures.
 * close_delayed work() now runs on a DAI basis rather than looping all DAIs
   in a card.
 * PM suspend()/resume() operations can now handle N CODECs and Platforms
   per sound card.
 * Added soc_bind_dai_link() to bind the component devices to the sound card.
 * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove
   DAI link components.
 * sysfs entries can now be registered per component per card.
 * snd_soc_new_pcms() functionailty rolled into dai_link_probe().
 * snd_soc_register_codec() now does all the codec list and mutex init.

This patch changes the probe() and remove() of the CODEC drivers as follows:-

 o Make CODEC driver a platform driver
 o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core.
 o Removed all static codec pointers (drivers now support > 1 codec dev)
 o snd_soc_register_pcms() now done by core.
 o snd_soc_register_dai() folded into snd_soc_register_codec().

CS4270 portions:
Acked-by: Timur Tabi <timur@freescale.com>

Some TLV320aic23 and Cirrus platform fixes.
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>

TI CODEC and OMAP fixes
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>

Samsung platform and misc fixes :-
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>

MPC8610 and PPC fixes.
Signed-off-by: Timur Tabi <timur@freescale.com>

i.MX fixes and some core fixes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

J4740 platform fixes:-
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

CC: Tony Lindgren <tony@atomide.com>
CC: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Kevin Hilman <khilman@deeprootsystems.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
CC: Kuninori Morimoto <morimoto.kuninori@renesas.com>
CC: Daniel Gloeckner <dg@emlix.com>
CC: Manuel Lauss <mano@roarinelk.homelinux.net>
CC: Mike Frysinger <vapier.adi@gmail.com>
CC: Arnaud Patard <apatard@mandriva.com>
CC: Wan ZongShun <mcuos.com@gmail.com>

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-12 14:00:00 +01:00
Axel Lin 4eaac50552 ASoC: wm8974: fix a memory leak if another WM8974 is registered
wm8974 is allocated in wm8974_i2c_probe() but is not freed if wm8974_register()
return -EINVAL (if another WM8974 is registered).

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-03 07:46:07 +01:00
Takashi Iwai d71f4cece4 Merge branch 'topic/asoc' into for-linus
Conflicts:
	sound/soc/codecs/ad1938.c
2010-05-20 12:00:43 +02:00
Mark Brown 29e189c29d ASoC: Remove unneeded suspend bias managment from CODEC drivers
The core will ensure that the device is in either STANDBY or OFF bias
before suspending, restoring the bias in the driver is unneeded. Some
drivers doing slightly more roundabout things have been left alone
for now.

Tested-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-05-10 10:35:25 +01:00
Mark Brown 759512fbac ASoC: Correct inversion of speaker mixer PCM switch
Reported-by: Anti Sullin <anti.sullin@artecdesign.ee>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-26 15:24:28 +01:00
Mark Brown b2c812e22d ASoC: Add indirection for CODEC private data
One of the features of the multi CODEC work is that it embeds a struct
device in the CODEC to provide diagnostics via a sysfs class rather than
via the device tree, at which point it's much better to use the struct
device private data rather than having two places to store it. Provide
an accessor function to allow this change to be made more easily, and
update all the CODEC drivers are updated.

To ensure use of the accessor the private data structure member is
renamed, meaning that if code developed with older an older core that
still uses private_data is merged it will fail to build.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-04-17 10:46:22 +09:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Guennadi Liakhovetski b2c3e92311 ASoC: clean up wm8974 and wm8978 clock divider handling
wm8974 and wm8978 codec drivers control DAC and ADC oversampling rates in their
.set_clkdiv() methods, which is wrong, because these are simple boolean
switches and not clock dividers. Move these bits to sound controls. Also remove
manual configuration of the MCLK divider in wm8978, since it is configured
automatically.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-29 14:32:52 +00:00
Guennadi Liakhovetski b3172f222a ASoC: fix params_rate() macro use in several codecs
Sevelar ASoC codec drivers wrongly assume, that the params_rate() macro
returns one of SNDRV_PCM_RATE_* defines instead of the actual numerical
sampling rate. Fix them.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
2009-12-24 11:41:21 +00:00
Guennadi Liakhovetski 48c03ce72f ASoC: wm8974: fix a wrong bit definition
The wm8974 datasheet defines BUFIOEN as bit 2.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
2009-12-18 12:58:53 +00:00
Mark Brown 0a3f5e35aa ASoC: Remove redundant snd_soc_dapm_new_widgets() calls
The DAPM widgets are now insntantiated by the core when creating the card
so there is no need for the individual CODEC drivers to do so.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-12 23:15:08 +00:00
Mark Brown fe3e78e073 ASoC: Factor out snd_soc_init_card()
snd_soc_init_card() is always called as the last part of the CODEC probe
function so we can factor it out into the core card setup rather than
have each CODEC replicate the code to do the initialiastation. This will
be required to support multiple CODECs per card.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-03 22:14:43 +00:00
Mark Brown 4c0bccbe66 Merge branch 'upstream/wm8974' into for-2.6.33 2009-09-30 15:48:38 +01:00
Mark Brown c36b2fc73a ASoC: Clean up WM8974 PLL configuration
Don't use a static for WM8974 PLL factors - we don't support more than
one device so it won't happen but no sense in leaving the race condition
hanging around.  Also, pre_div is a single bit and it's a bit simpler if
we move the handling of the factor of 4 in the output into the
coefficient setup.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-30 15:45:25 +01:00
Mark Brown 9f072b7b22 Merge branch 'for-2.6.32' into for-2.6.33 2009-09-18 15:09:44 +01:00
Huang Weiyi d4e54e871f ASoC: remove unused #include <linux/version.h>
Remove unused #include <linux/version.h>('s) in
  sound/soc/codecs/ad1836.c
  sound/soc/codecs/ad1938.c
  sound/soc/codecs/wm8974.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-16 21:08:54 +01:00
Mark Brown 85488037bb ASoC: Add source argument to PLL configuration
More and more devices feature PLLs and FLLs with the ability to select
between multiple input clocks. In order to better support these devices
a new argument, source, has been added to the set_pll() configuration
API. Using set_clkdiv() is often difficult due to the need to stop the
PLL/FLL before any reconfiguration can be done.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-05 18:52:16 +01:00
Mark Brown 1e97f50b70 ASoC: Factor out cache I/O from WM8974
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-15 12:15:10 +01:00
javier Martin 25cbf46520 ASoC: Correct a bug with "ADC Inversion Switch" in wm8974 codec.
This corrects a bug with ADC Inversion Switch in wm8974 codec.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-22 00:13:27 +01:00
Mark Brown 8a123ee2a4 ASoC: WM8974 DAPM cleanups
Also implement AUX mode control.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 21:30:42 +01:00
Mark Brown 8b83a19367 ASoC: WM8974 cosmetic cleanups
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 21:30:35 +01:00
Mark Brown cb11d39ead ASoC: Use symmetric rates for WM8974
The chip has a single LRCLK.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 21:30:25 +01:00
Mark Brown a5f8d2f1b8 ASoC: Add WM8974 TLV information
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 19:34:32 +01:00
Mark Brown 91d0c3ecba ASoC: Refresh WM8974 PLL configuration
Move away from a fixed table to runtime calculation.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 19:34:23 +01:00
Mark Brown 33d81af4d1 ASoC: Declare 2 channels for WM8974
The device is a mono device but it can read two channel data and
many I2S controllers only understand 2 channels.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 19:34:16 +01:00
Mark Brown df1ef7a38d ASoC: Refresh WM8974 bias configuration
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30 19:34:09 +01:00
Mark Brown 372a14a4a4 ASoC: Remove unreferenced wm8974_add_controls()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-29 16:14:19 +01:00
Mark Brown 4fcbbb67a3 ASoC: Update WM8974 to use standard I2C device probe methods
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-23 16:43:12 +01:00
Mark Brown 1a55b3f6ed ASoC: WM8974 checkpatch cleanups
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-23 11:31:40 +01:00
Mark Brown 0a1bf55335 ASoC: Add WM8974 CODEC driver
The WM8974 is a low power, high quality mono CODEC designed for portable
applications such as digital still cameras or digital voice recorders.

This driver was originally written by Graeme Gregory and Liam Girdwood
and has since been maintained by myself with some updates contributed by
Brett Saunders and Javier Martin.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-23 11:28:03 +01:00