When we terminate driver I/O (because we need to stop using a certain
channel path) we also need to ensure that a timer (which may have been
set up using ccw_device_start_timeout) is cleared.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When a timeout occurs for users of ccw_device_start_timeout
we will stop the IO and call the drivers int handler with
the irb pointer set to ERR_PTR(-ETIMEDOUT). Sometimes
however we'd set the irb pointer to ERR_PTR(-EIO) which is
not intended. Just set the correct value in all codepaths.
Reported-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
There are cases a device driver can't start IO because the device is
currently in use by cio. In this case the device driver is notified
when the device is usable again.
Using ccw_device_start_timeout we would set the timeout (and change
an existing timeout) before we test for internal usage. Worst case
this could lead to an unexpected timer deletion.
Fix this by setting the timeout after we test for internal usage.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix the kernel-doc usage in cio to get rid of (W=1) build warnings like:
drivers/s390/cio/cio.c:1068: warning: No description found for parameter 'sch'
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Make sure we use proper Return sections, and make the output
for cmf_enable() less odd.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add the correct SPDX license to a few more files under arch/s390 and
drivers/s390 which have been missed to far.
The SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The 'no target buffer empty' error code only applies to HiperSockets.
If this code is reported on a different queue type, be sure to make the
same amount of noise as for any other error code.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In the unlikely case that an ERROR buffer (presented by the HW)
consumed the last available slot on the input queue, increment the
corresponding statistics counter.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Now that the SPDX tag is in all drivers/s390/ files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Halil Pasic <pasic@linux.vnet.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/s390/cio/ files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In preparation for unconditionally passing the struct timer_list
pointer to all timer callbacks, switch to using the new timer_setup()
and from_timer() to pass the timer pointer explicitly.
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
[sebott: fixed compile error due to invalid struct member]
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Pull s390 updates from Heiko Carstens:
"Since Martin is on vacation you get the s390 pull request for the
v4.15 merge window this time from me.
Besides a lot of cleanups and bug fixes these are the most important
changes:
- a new regset for runtime instrumentation registers
- hardware accelerated AES-GCM support for the aes_s390 module
- support for the new CEX6S crypto cards
- support for FORTIFY_SOURCE
- addition of missing z13 and new z14 instructions to the in-kernel
disassembler
- generate opcode tables for the in-kernel disassembler out of a
simple text file instead of having to manually maintain those
tables
- fast memset16, memset32 and memset64 implementations
- removal of named saved segment support
- hardware counter support for z14
- queued spinlocks and queued rwlocks implementations for s390
- use the stack_depth tracking feature for s390 BPF JIT
- a new s390_sthyi system call which emulates the sthyi (store
hypervisor information) instruction
- removal of the old KVM virtio transport
- an s390 specific CPU alternatives implementation which is used in
the new spinlock code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits)
MAINTAINERS: add virtio-ccw.h to virtio/s390 section
s390/noexec: execute kexec datamover without DAT
s390: fix transactional execution control register handling
s390/bpf: take advantage of stack_depth tracking
s390: simplify transactional execution elf hwcap handling
s390/zcrypt: Rework struct ap_qact_ap_info.
s390/virtio: remove unused header file kvm_virtio.h
s390: avoid undefined behaviour
s390/disassembler: generate opcode tables from text file
s390/disassembler: remove insn_to_mnemonic()
s390/dasd: avoid calling do_gettimeofday()
s390: vfio-ccw: Do not attempt to free no-op, test and tic cda.
s390: remove named saved segment support
s390/archrandom: Reconsider s390 arch random implementation
s390/pci: do not require AIS facility
s390/qdio: sanitize put_indicator
s390/qdio: use atomic_cmpxchg
s390/nmi: avoid using long-displacement facility
s390: pass endianness info to sparse
s390/decompressor: remove informational messages
...
Because we do not make use of the cda (channel data address) for test,
no-op ccws no address translation takes place. This means cda could
contain a guest address which we do not want to attempt to free. Let's
check the command type and skip cda free when it is not needed.
For a TIC ccw, ccw->cda points to either a ccw in an existing chain or
it points to a whole new allocated chain. In either case the data will
be freed when the owning chain is freed.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Message-Id: <1510068152-21988-1-git-send-email-jjherne@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
qdio maintains an array of struct indicator_t. put_indicator takes a pointer
to a member of a struct indicator_t within that array, calculates the index,
and uses the array and the index to get the struct indicator_t.
Simply use the pointer directly.
Although the pointer happens to point to the first member of that struct
use the container_of macro.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
qdio uses atomic_read to find an unused indicator and atomic_set to
flag it as used. This could lead to multiple users getting the same
indicator. Use atomic_cmpxchg instead.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
debug_event currently truncates the data if used with a size larger than
the buf_size of the debug feature. For lots of callers of this function,
wrappers have been implemented that loop until all data is handled.
Move that functionality into debug_event_common and get rid of the wrappers.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If the count field of a ccw is zero, there is no need to
try to pin page(s) for it. Let's check the count value
before starting pinning operations.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20171011023822.42948-3-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We currently return the same error code (-EFAULT) to indicate two
different error cases:
1. a bug in vfio-ccw implementation has been found.
2. a buggy channel program has been detected.
This brings difficulty for userland program (specifically Qemu) to
handle.
Let's use -EFAULT to only indicate the first case. For the second
case, we simply hand over the ccws to lower level for further
handling.
Notice:
Once a bad idaw address is detected, the current behavior is to
suppress the ssch. With this fix, the channel program will be
accepted, and part of the channel program (the part ahead of
the bad idaw) could possibly be executed by the device before
I/O conclusion.
Suggested-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20171011023822.42948-2-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When grouping devices, the ccwgroup core only checks whether all of the
devices are bound to the same ccw_driver. It has no means of checking
if the requesting ccwgroup driver actually supports this device type.
qeth implements its own device matching in qeth_core_probe_device(),
while ctcm and lcs currently have no sanity-checking at all.
Enable ccwgroup drivers to optionally defer the device type checking to
the ccwgroup core, by specifying their supported ccw_driver.
This allows us drop the device type matching from qeth, and improves
the robustness of ctcm and lcs.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Instead of open coding tod clock to ns conversions use the timex helper.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
All (but one) cmf related sysfs attributes have been converted to read
directly from the measurement block using cmf_read. This is not
possible for the avg_utilization attribute since this is an aggregation
of several values for which cmf_read only returns average values.
Move the computation of the utilization value to the cmf_read interface
such that it can use the raw data.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
To ensure data consistency when reading from the channel measurement
block we wait for the subchannel to become idle and copy the whole
block. This is unnecessary when all we do is export the individual
values via sysfs. Read the values for sysfs export directly from
the measurement block.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
cmf_copy_block tries to ensure data consistency by copying the
channel measurement block twice and comparing the data. This was
needed on very old machines only. Nowadays we guarantee
consistency by copying the data when the channel is idle.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
No need for refcounting - the data can be on stack. Also change
the locking in this function to only use spin_lock_irq (the
function waits, thus it's never called from IRQ context).
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
No need for refcounting - the data can be on stack.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When enabling channel measurement fails with a busy condition we wait
for the next interrupt to arrive before we retry the operation. For
devices which usually don't create interrupts we wait forever.
Although the waiting is done interruptible that behavior is not
expected and confused some users. Abort the operation after a 10s
timeout.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In some situations we don't receive notification from firmware that
a previously unusable channelpath is usable again.
Schedule recovery for devices that return from path verification
without using all potentially usable paths. The recovery thread will
periodically trigger a path verification on the affected devices.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Suggested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add const to bin_attribute structures as they are only passed to the
functions device_{remove/create}_bin_file. The corresponding arguments
are of type const, so declare the structures to be const.
Cross compiled for s390 architecture.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-----BEGIN PGP SIGNATURE-----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=CQfQ
-----END PGP SIGNATURE-----
Merge tag 'vfio-ccw-20170724' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features
Pull vfio-ccw fix from Cornelia Huck:
"A bugfix in the ccw translation code."
attribute_group are not supposed to change at runtime. All functions
working with attribute_group provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When we are translating channel data addresses from guest to host
address space for TIC instructions we are getting incorrect
addresses because of a pointer arithmetic error.
We currently calculate the offset of the TIC's cda from the start
of the channel program chain (ccw->cda - ccw_head). We then add
that to the address of the ccw chain in host memory (iter->ch_ccw).
The problem is that iter->ch_ccw is a pointer to struct ccw1 so
when we increment it we are actually incrementing by the size of
struct ccw1 which is 8 bytes. The intent was to increment by
n-bytes, not n*8.
The fix: cast iter->ch_ccw to char* so it will be incremented by
n*1.
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170721011436.76112-1-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When channel path is identified as the report source code (RSC)
of a CRW, and initialized (CRW_ERC_INIT) is recognized as the
error recovery code (ERC) by the channel subsystem, it indicates
a "path has come" event.
Let's handle this case in chp_process_crw().
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix this set but not used warning:
drivers/s390/cio/vfio_ccw_drv.c: In function 'vfio_ccw_sch_io_todo':
drivers/s390/cio/vfio_ccw_drv.c:72:21: warning: variable 'sch' set but not used [-Wunused-but-set-variable]
struct subchannel *sch;
^
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull s390 updates from Martin Schwidefsky:
"The bulk of the s390 patches for 4.13. Some new things but mostly bug
fixes and cleanups. Noteworthy changes:
- The SCM block driver is converted to blk-mq
- Switch s390 to 5 level page tables. The virtual address space for a
user space process can now have up to 16EB-4KB.
- Introduce a ELF phdr flag for qemu to avoid the global
vm.alloc_pgste which forces all processes to large page tables
- A couple of PCI improvements to improve error recovery
- Included is the merge of the base support for proper machine checks
for KVM"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits)
s390/dasd: Fix faulty ENODEV for RO sysfs attribute
s390/pci: recognize name clashes with uids
s390/pci: provide more debug information
s390/pci: fix handling of PEC 306
s390/pci: improve pci hotplug
s390/pci: introduce clp_get_state
s390/pci: improve error handling during fmb (de)registration
s390/pci: improve unreg_ioat error handling
s390/pci: improve error handling during interrupt deregistration
s390/pci: don't cleanup in arch_setup_msi_irqs
KVM: s390: Backup the guest's machine check info
s390/nmi: s390: New low level handling for machine check happening in guest
s390/fpu: export save_fpu_regs for all configs
s390/kvm: avoid global config of vm.alloc_pgste=1
s390: rename struct psw_bits members
s390: rename psw_bits enums
s390/mm: use correct address space when enabling DAT
s390/cio: introduce io_subchannel_type
s390/ipl: revert Load Normal semantics for LPAR CCW-type re-IPL
s390/dumpstack: remove raw stack dump
...
Pull in the fix for shared tags, as it conflicts with the pending
changes in for-4.13/block. We already pulled in v4.12-rc5 to solve
other conflicts or get fixes that went into 4.12, so not a lot
of changes in this merge.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The sysfs attributes implemented by the vfio_ccw driver are also implemented by
the io_subchannel driver. Move these into a device_type which is set by the
css bus.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently we use nornal Linux errno values in the block layer, and while
we accept any error a few have overloaded magic meanings. This patch
instead introduces a new blk_status_t value that holds block layer specific
status codes and explicitly explains their meaning. Helpers to convert from
and to the previous special meanings are provided for now, but I suspect
we want to get rid of them in the long run - those drivers that have a
errno input (e.g. networking) usually get errnos that don't know about
the special block layer overloads, and similarly returning them to userspace
will usually return somethings that strictly speaking isn't correct
for file system operations, but that's left as an exercise for later.
For now the set of errors is a very limited set that closely corresponds
to the previous overloaded errno values, but there is some low hanging
fruite to improve it.
blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse
typechecking, so that we can easily catch places passing the wrong values.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zA8N
-----END PGP SIGNATURE-----
Merge tag 'vfio-ccw-20170522' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into fixes
Pull vfio-ccw fix from Conelia Huck:
"vfio-ccw: one patch"
* Make some symbols in vfio-ccw static, as detected by sparse.
Make some symbols static to fix sparse warnings like:
drivers/s390/cio/vfio_ccw_ops.c:73:1: warning: symbol 'mdev_type_attr_name' was not declared. Should it be static?
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Avoid false positive warnings like this with gcc 7.1:
drivers/s390/cio/qdio_debug.h:63:4:
note: 'snprintf' output between 8 and 17 bytes into a destination of size 16
snprintf(debug_buffer, QDIO_DBF_LEN, text);
and simply increase the size of the string buffer.
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Avoid false positive warnings like this with gcc 7.1:
drivers/s390/cio/ccwgroup.c:41:21:
warning: '%d' directive writing between 1 and 10 bytes into a region of size 4
sprintf(str, "cdev%d", i);
and simply increase the size of the string buffer.
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When vfio_ccw_mdev_reset fails during the remove process of the mdev,
the current implementation simply returns.
The failure indicates that the subchannel device is in a NOT_OPER state,
thus the right thing to do should be removing the mdev.
While we are at here, reverse the condition check to make the code more
concise and readable.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170412090816.79108-3-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Remove several unnecessary checks for the @private pointer, since it
can never be NULL in these places.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170412090816.79108-2-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Although Linux does not use format-0 channel command words (CCW0)
these are a non-optional part of the platform spec, and for the sake
of platform compliance, and possibly some non-Linux guests, we have
to support CCW0.
Making the kernel execute a format 0 channel program is too much hassle
because we would need to allocate and use memory which can be addressed
by 24 bit physical addresses (because of CCW0.cda). So we implement CCW0
support by translating the channel program into an equivalent CCW1
program instead.
Based upon an orginal patch by Kai Yue Wang.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-16-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The current implementation doesn't check if the subchannel is in a
proper device state when handling an event. Let's introduce
a finite state machine to manage the state/event change.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-14-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Introduce a singlethreaded workqueue to handle the I/O interrupts.
With the work added to this queue, we store the I/O results to the
io_region of the subchannel, then signal the userspace program to
handle the results.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-13-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Realize VFIO_DEVICE_GET_IRQ_INFO ioctl to retrieve
VFIO_CCW_IO_IRQ information.
Realize VFIO_DEVICE_SET_IRQS ioctl to set an eventfd fd for
VFIO_CCW_IO_IRQ. Once a write operation to the ccw_io_region
was performed, trigger a signal on this fd.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20170317031743.40128-12-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Introduce VFIO_DEVICE_RESET ioctl for vfio-ccw to make it possible
to hot-reset the device.
We try to achieve a reset by first disabling the subchannel and
then enabling it again: this should clear all state at the subchannel.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-11-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Introduce device information about vfio-ccw: VFIO_DEVICE_FLAGS_CCW.
Realize VFIO_DEVICE_GET_REGION_INFO ioctl for vfio-ccw.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20170317031743.40128-10-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We implement the basic ccw command handling infrastructure
here:
1. Translate the ccw commands.
2. Issue the translated ccw commands to the device.
3. Once we get the execution result, update the guest SCSW
with it.
Acked-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-9-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
To provide user-space a set of interfaces to:
1. pass in a ccw program to perform an I/O operation.
2. read back I/O results of the completed I/O operations.
We introduce an MMIO region for the vfio-ccw device here.
This region is defined to content:
1. areas to store arguments that an ssch required.
2. areas to store the I/O results.
Using pwrite/pread to the device on this region, a user-space program
could write/read data to/from the vfio-ccw device.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-8-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
To make vfio support subchannel devices, we need to leverage the
mediated device framework to create a mediated device for the
subchannel device.
This registers the subchannel device to the mediated device
framework during probe to enable mediated device creation.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-7-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Introduce ccwchain structure and helper functions that can be used to
handle a channel program issued from a virtual machine.
The following limitations apply:
1. Supports only prefetch enabled mode.
2. Supports idal(c64) ccw chaining.
3. Supports 4k idaw.
4. Supports ccw1.
5. Supports direct ccw chaining by translating them to idal ccws.
CCW translation requires to leverage the vfio_(un)pin_pages interfaces
to pin/unpin sets of mem pages frequently. Currently we have a lack of
support to do this in an efficient way. So we introduce pfn_array data
structure and helper functions to handle pin/unpin operations here.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-6-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
To make vfio support subchannel devices, we need a css driver for
the vfio subchannels. This patch adds a basic vfio-ccw subchannel
driver for this purpose.
To enable VFIO for vfio-ccw, enable S390_CCW_IOMMU config option
and configure VFIO as required.
Acked-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-5-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Export the common I/O interfaces those are needed by an I/O
subchannel driver to actually talk to the subchannel.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-3-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
For future code reuse purpose, this decouples the cio code with
the ccw device specific parts from ccw_device_cancel_halt_clear,
and makes a new common I/O interface named cio_cancel_halt_clear.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-2-bjsdjshi@linux.vnet.ibm.com>
[CH: Fix typo]
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Introduce a trivial, mostly empty <linux/sched/cputime.h> header
to prepare for the moving of cputime functionality out of sched.h.
Update all code that relies on these facilities.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We don't actually need the full rculist.h header in sched.h anymore,
we will be able to include the smaller rcupdate.h header instead.
But first update code that relied on the implicit header inclusion.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prevent kernel crashes due to unhandled exceptions raised by the CHSC
instruction which may for example be triggered by invalid ioctl data.
Fixes: 64150adf89 ("s390/cio: Introduce generic synchronous CHSC IOCTL")
Cc: <stable@vger.kernel.org> # v3.11+
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With multiple input queues, these DBFs turned out to be not
very helpful...
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In tiqdio_call_inq_handlers(), we're looping over all
input queues on the *same* irq. So instead of using the
queues' back pointer, we can just access the irq directly.
No functional change.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
For devices with multiple input queues, tiqdio_call_inq_handlers()
iterates over all input queues and clears the device's DSCI
during each iteration. If the DSCI is re-armed during one
of the later iterations, we therefore do not scan the previous
queues again.
The re-arming also raises a new adapter interrupt. But its
handler does not trigger a rescan for the device, as the DSCI
has already been erroneously cleared.
This can result in queue stalls on devices with multiple
input queues.
Fix it by clearing the DSCI just once, prior to scanning the queues.
As the code is moved in front of the loop, we also need to access
the DSCI directly (ie irq->dsci) instead of going via each queue's
parent pointer to the same irq. This is not a functional change,
and a follow-up patch will clean up the other users.
In practice, this bug only affects CQ-enabled HiperSockets devices,
ie. devices with sysfs-attribute "hsuid" set. Setting a hsuid is
needed for AF_IUCV socket applications that use HiperSockets
communication.
Fixes: 104ea556ee ("qdio: support asynchronous delivery of storage blocks")
Cc: <stable@vger.kernel.org> # v3.2+
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This is a leftover from the 31 bit era to avoid 64 bit divisions.
Get rid of it.
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove an unused member of struct channel subsystem.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Simplify error handling during css initialization by moving the error
handling code to setup_css (which now cleans up after itself).
Also remove the odd special cleanup handling of the pseudo_subchannel.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cleanup the code to handle the css device attribute. Move everything
to an attribute group to let the driver core handle attribute
creation and removal.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Obtain the real channel subsystem id and use that for the generation
of a unique path group id. Note that this change does not affect the
channel subsystem id as used in the user-visible naming of subchannels
and friends.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshik@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently the cssid in various structures is used as the id of
the respective channel subsystem. Sometimes however we call the
index in the channel_subsystems array cssid. In some places the
id is even used as the index.
Provide a new define MAX_CSS_IDX and use it where appropriate.
In addition to that provide a dummy function to find a channel
subsystem by its id and a macro to iterate over the channel
subsystems.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use a flexible array instead. The size of the structure is not used
within chsc_sstpi, therefore no change in semantics but one less
sparse warning:
drivers/s390/cio/chsc.c:1219:27: warning: Variable length array is used.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Makefile currently controlling compilation of this code is:
obj-y += airq.o blacklist.o chsc.o cio.o css.o chp.o idset.o isc.o \
fcx.o itcw.o crw.o ccwreq.o trace.o ioasm.o
ccw_device-objs += device.o device_fsm.o device_ops.o
ccw_device-objs += device_id.o device_pgid.o device_status.o
obj-y += ccw_device.o cmf.o
...meaning that the files here are not being built as modular.
Lets remove the couple traces of modular infrastructure use, so that
when reading the code there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
We replace module.h with export.h where the file does export some
symbols.
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Arnd Bergmann <arndb@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Clean up DEV_STATE_SENSE_PGID related code, since it's not
used anymore. Everything related to path verification is
handled within DEV_STATE_VERIFY.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
During IPL we register all chpids that are not in the unrecognized
state. This includes chpids that are not usable and chpids for which
the state could not be obtained.
Change that to only register chpids in the configured (usable) or
standby (usable after a configure operation) state. All other chpids
could only be made available by external control for which we would
receive machine checks.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Since commit 9f3d6d7 chsc_get_channel_measurement_chars is called with
interrupts disabled during resume from hibernate. Since this function
used spin_unlock_irq, interrupts have been enabled accidentally. Fix
this by using the irqsave variant.
Since we can't guarantee the IRQ-enablement state for all (future/
external) callers, change the locking in related functions to prevent
similar bugs in the future.
Fixes: 9f3d6d7 ("s390/cio: update measurement characteristics")
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
cio_cancel was declared twice. Remove one of them.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
During qdio_shutdown the queue tasklets are killed for all inbound and
outbound queues. The queue structures might be freed after
qdio_shutdown.
Thus it must be guaranteed that these queue tasklets are not rescheduled
after that. In addition the outbound queue timers are deleted and it
must
be guaranteed that these timers are not restarted after qdio_shutdown
processing. Timer deletion should make use of del_timer_sync() to make
sure qdio_outbound_timer() is finished on other CPUs as well. Queue
tasklets should be scheduled in state QDIO_IRQ_STATE_ACTIVE only.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Prior to starting IO qdio checks for the internal state of the ccw
device. These checks happen without locking, so consistency between
state evaluation and starting of the IO is not guaranteed.
Since the internal state is checked during ccw_device_start it is
safe to get rid of these additional checks.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
qdio sometimes checks return codes twice. First with the ccw device's
lock held and then a 2nd time after the lock is released. Simplify
the code by releasing the lock earlier and unify the return code
evaluation.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
All qdio functions that use spin_lock_irqsave are never used
from irq context. Thus it is safe to convert all of them to
use spin_lock_irq.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
A copy of struct subchannel_id is maintained in ccw_device_private.
The subchannel id is a property of the subchannel. The additional
copy is not needed.
Internal users can obtain it from subchannel.schid - device drivers
can use ccw_device_get_schid().
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We want to get rid of the copy of struct subchannel_id maintained in
ccw_device_private, so obtain it using ccw_device_get_schid().
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We want to get rid of the copy of struct subchannel_id maintained in
ccw_device_private, so obtain it from the subchannel directly.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We store requests for channel path configure operations in an array but
maintain an additional cfg_busy variable (indicating if we have requests
stored in said array). When 2 tasks request a channel path configure
operation cfg_busy could be set to 0 even if we still have unprocessed
requests. This would lead to the second task being woken up although its
request was not processed yet.
Fix that by getting rid of cfg_busy and use the chp_cfg_task array
in the wake up condition.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
cfg_lock is never held long and we don't want to sleep while the
lock is being held. Thus it can be converted to a simple spinlock.
In addition we can now use the lock during the evaluation of a
wake_up condition.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The workqueue "chp_wq" is involved in performing pending
configure tasks for channel paths.
It has a single work item(&cfg_work) and hence doesn't require
ordering. Also, it is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with the use of
system_wq.
System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When we fetch channel path descriptors via chsc we use a suboptimal
struct chsc_scpd and adjust that by casting the response to a generic
chsc_response_struct. Simplify the code by improving struct chsc_scpd.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When fetching channel path descriptors we've only evaluated the rfmt
parameter which could lead us to trigger the chsc even though the
machine doesn't support the specific format or to not trigger the
chsc and report a failure to userspace even though the machine would've
supported it.
Improve these checks and change the parameters of the in-kernel
user to be less confusing.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Not all machines / hypervisors support the chsc commands to fetch
the fmt1 descriptor. When these commands fail the channel path would
currently not be available to linux.
Since users of these descriptors can already deal with invalid data
make fetching it optional. The only data that is mandatory for us is
the fmt0 channel path descriptor.
Also make the return code for missing facilities in
chsc_get_channel_measurement_chars consistent to other functions.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Via CHSC_INFO_CU we ought to provide userspace with control unit
configuration data. Due to an erroneous request code we trigger the
wrong chsc command. Fix this copy and paste error.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix an incorrect kernel doc comment in device_ops.c. Also
provide proper function markups while at it.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Prior to commit 1bc6664bdf a call to
enable_cmf for a device for which channel measurement was already
enabled resulted in a reset of the measurement data.
What looked like bugs at the time (a 2nd allocation was triggered
but failed, reset was called regardless of previous failures, and
errors have not been reported to userspace) was actually something
at least one userspace tool depended on. Restore that behavior in
a sane way.
Fixes: 1bc6664bdf ("s390/cio: use device_lock during cmb activation")
Cc: stable@vger.kernel.org #v4.4+
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use only simple inline assemblies which consist of a single basic
block if the register asm construct is being used.
Otherwise gcc would generate broken code if the compiler option
--sanitize-coverage=trace-pc would be used.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use only simple inline assemblies which consist of a single basic
block if the register asm construct is being used.
Otherwise gcc would generate broken code if the compiler option
--sanitize-coverage=trace-pc would be used.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The sync clock operation of the channel subsystem call for STP delivers
the TOD clock difference as a result. Use this TOD clock difference
instead of the difference between the TOD timestamps before and after
the sync clock operation.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Daniel van Gerpen <daniel@vangerpen.de>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Convert the uses of pr_warning to pr_warn so there are fewer
uses of the old pr_warning.
Miscellanea:
o Align arguments
o Coalesce formats
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Per channel path measurement characteristics are obtained during channel
path registration. However if some properties of a channel path change
we don't update the measurement characteristics.
Make sure to update the characteristics when we change the properties of
a channel path or receive a notification from FW about such a change.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Make sure that in all cases where we could not obtain measurement
characteristics the associated fields are set to invalid values.
Note: without this change the "shared" capability of a channel path
for which we could not obtain the measurement characteristics was
incorrectly displayed as 0 (not shared). We will now correctly
report "unknown" in this case.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Measurement characteristics are allocated during channel path
registration but not freed during deregistration. Fix this by
embedding these characteristics inside struct channel_path.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Adding tracepoints to inline functions adds tracepoint invocation code
for each instance where the function is inlined. The resulting increase
in kernel code size can have negative impact:
- More cache misses in instruction cache
- Reduced amount of DMA-capable memory
Therefore change all functions implementing I/O instructions from inline
to normal functions.
Bloat-o-meter summary after change (using performance_defconfig):
add/remove: 24/2 grow/shrink: 4/39 up/down: 2205/-4858 (-2653)
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add tracepoints to interrupt handler and core inline assemblies used by
the s390 common I/O layer. These tracepoints can be used to monitor and
validate hardware and hypervisor requests and responses.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Replace the current semi-arbitrary distribution of inline assemblies:
- Inline assemblies used by CIO go into ioasm.h
- Data definitions used by inline assemblies go into cio.h
Beyond cleaning up the current structure this is also required for
use of tracepoints in inline assemblies introduced by a follow-on
patch.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The numeric representation of the xsch instruction was incorrectly
specified, resulting in reserved fields of the instruction opcode
potentially being set to a non-zero value. While this doesn't currently
cause any problem, a future architecture might make use of these fields
so that the current specification could result in an exception or
unwanted side-effects.
Fix this by using the xsch instruction code for which support in
binutils was added in 2003.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
There is no longer a need to maintain two versions of the same inline
assembly - one with exception handling, and one without - so get rid of
the duplicates and adjust names accordingly. This applies to stsch_err
and msch_err which are now renamed to stsch and msch respectively,
while the original msch function is removed.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The debug_unregister() function performs also input parameter validation.
Thus the test around the calls is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
To collect the CPU registers of the crashed system allocated a single
page with memblock_alloc_base and use it as a copy buffer. Replace the
stop-and-store-status sigp with a store-status-at-address sigp in
smp_save_dump_cpus() and smp_store_status(). In both cases the target
CPU is already stopped and store-status-at-address avoids the detour
via the absolute zero page.
For kexec simplify s390_reset_system and call store_status() before
the prefix register of the boot CPU has been set to zero. Use STPX
to store the prefix register and remove dump_prefix_page.
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Allow to ipl from CCW based devices residing in any subchannel set.
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Simplify the css_generate_pgid code by using stap() independent of
CONFIG_SMP. For !CONFIG_SMP builds stap() will deliver the address
of the cpu we IPL'ed from (which can be != 0).
Note: the ifdef was likely added to be compatible with _very_ old
machines which we don't support anyway.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull s390 updates from Martin Schwidefsky:
"There is only one new feature in this pull for the 4.4 merge window,
most of it is small enhancements, cleanup and bug fixes:
- Add the s390 backend for the software dirty bit tracking. This
adds two new pgtable functions pte_clear_soft_dirty and
pmd_clear_soft_dirty which is why there is a hit to
arch/x86/include/asm/pgtable.h in this pull request.
- A series of cleanup patches for the AP bus, this includes the
removal of the support for two outdated crypto cards (PCICC and
PCICA).
- The irq handling / signaling on buffer full in the runtime
instrumentation code is dropped.
- Some micro optimizations: remove unnecessary memory barriers for a
couple of functions: [smb_]rmb, [smb_]wmb, atomics, bitops, and for
spin_unlock. Use the builtin bswap if available and make
test_and_set_bit_lock more cache friendly.
- Statistics and a tracepoint for the diagnose calls to the
hypervisor.
- The CPU measurement facility support to sample KVM guests is
improved.
- The vector instructions are now always enabled for user space
processes if the hardware has the vector facility. This simplifies
the FPU handling code. The fpu-internal.h header is split into fpu
internals, api and types just like x86.
- Cleanup and improvements for the common I/O layer.
- Rework udelay to solve a problem with kprobe. udelay has busy loop
semantics but still uses an idle processor state for the wait"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
s390: remove runtime instrumentation interrupts
s390/cio: de-duplicate subchannel validation
s390/css: unneeded initialization in for_each_subchannel
s390/Kconfig: use builtin bswap
s390/dasd: fix disconnected device with valid path mask
s390/dasd: fix invalid PAV assignment after suspend/resume
s390/dasd: fix double free in dasd_eckd_read_conf
s390/kernel: fix ptrace peek/poke for floating point registers
s390/cio: move ccw_device_stlck functions
s390/cio: move ccw_device_call_handler
s390/topology: reduce per_cpu() invocations
s390/nmi: reduce size of percpu variable
s390/nmi: fix terminology
s390/nmi: remove casts
s390/nmi: remove pointless error strings
s390: don't store registers on disabled wait anymore
s390: get rid of __set_psw_mask()
s390/fpu: split fpu-internal.h into fpu internals, api, and type headers
s390/dasd: fix list_del corruption after lcu changes
s390/spinlock: remove unneeded serializations at unlock
...
cio_validate_io_subchannel() and cio_validate_msg_subchannel() are
identical, as the called functions already take care about the
differences between subchannel types.
Just inline the code into the only user,
cio_validate_subchannel(), instead.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The ret variable is always set by the fn function.
There is no need to initialize it.
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
device_ops.c should only contain functions that are called by ccw device
drivers. Move the cio internal functions that handle unconditional
reserve + release to device_pgid.c
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
device_ops.c should only contain functions that are called by ccw device
drivers. Move the cio internal function ccw_device_call_handler to
device_fsm.c where it's used. Remove some useless comments while at it.
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove all the casts to and from the machine check interruption code.
This patch changes struct mci to a union, which contains an anonymous
structure with the already known bits and in addition an unsigned
long field, which contains the raw machine check interruption code.
This allows to simply assign and decoce the interruption code value
without the need for all those casts we had all the time.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We often need to correlate an 8 bit path mask with the position
in a channel path array. Introduce and use pathmask_to_pos for
that task.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
During resume from hibernate we already reenable measurement block
updates on a per device basis. In addition to that we also need to
activate channel measurement globally using the set channel monitor
instruction.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Extended measurement blocks need to be 64 byte aligned. To achieve that
128 bytes for each measurement block are allocated and an align callback
returns a 64 byte aligned address inside this area.
Replace this code with kmem_cache allocations.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The measurement block for the extended measurement data is not freed when
switching off per device measurement. Free the measurement block after HW
stopped accessing it.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
During allocation of extended measurement blocks we check if the device is
already active for channel measurement and add the device to a list of
devices with active channel measurement. The check is done under ccwlock
protection and the list modification is guarded by a different lock.
To guarantee that both states are in sync make sure that both locks
are held during the allocation process (like it's already done for the
"normal" measurement block allocation).
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Devices with active channel measurement are included in a list. When a
device is removed without deactivating channel measurement first the
list_head is freed but still used. Fix this by making sure that
channel measurement is deactivated during device deregistration.
For devices that we deregister because they are no longer accessible
deactivating channel measurement will fail. In this case we can report
success because the FW will no longer access the measurement block.
In addition to these steps keep an extra device reference while
channel measurement is active.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Hold the device_lock during [de]activation of the channel measurement
block to synchronize concurrent usage of these functions.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ensure that we hold the ccwlock when accessing private data. Return errors
that occur during measurement enabling to userspace. Apply some cleanups
while at it.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If HiperSockets Completion Queueing is enabled, qdio always
issues a warning, since the condition is always met.
This patch fixes the condition in WARN_ON_ONCE that was always
true.
Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch remove unneeded variables used to store return values.
These issues were detected with the Coccinelle script:
scripts/coccinelle/misc/returnvar.cocci
[heiko.carstens@de.ibm.com]: make qeth_l[2/3]_stop() return void
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
A hardware problem on a FICON link is reported by the Channel Subsystem
to the operating system via a Link Incident Record (LIR). In response,
the operating system should issue a message that enables hardware
service personnel to identify and repair the failing component.
Current Linux LIR handling is broken because LIR data is incorrectly
interpreted and no log message is generated.
This patch fixes Linux LIR handling by implementing a new log message
for LIRs indicating a degraded or non-operational link. Also LIRs are
no longer used to deactivate channel paths because the available data
does not reliably allow to determine the affected channel path.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
After dutifully acting as statement separator for 6 long years, this
comma has finally grown into a full semicolon.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.
See: commit 1f33c41c03 ("seq_file: Rename seq_overflow() to
seq_has_overflowed() and make public")
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the 31 bit support in order to reduce maintenance cost and
effectively remove dead code. Since a couple of years there is no
distribution left that comes with a 31 bit kernel.
The 31 bit kernel also has been broken since more than a year before
anybody noticed. In addition I added a removal warning to the kernel
shown at ipl for 5 minutes: a960062e58 ("s390: add 31 bit warning
message") which let everybody know about the plan to remove 31 bit
code. We didn't get any response.
Given that the last 31 bit only machine was introduced in 1999 let's
remove the code.
Anybody with 31 bit user space code can still use the compat mode.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The multi-threading facility is introduced with the z13 processor family.
This patch adds code to detect the multi-threading facility. With the
facility enabled each core will surface multiple hardware threads to the
system. Each hardware threads looks like a normal CPU to the operating
system with all its registers and properties.
The SCLP interface reports the SMT topology indirectly via the maximum
thread id. Each reported CPU in the result of a read-scp-information
is a core representing a number of hardware threads.
To reflect the reduced CPU capacity if two hardware threads run on a
single core the MT utilization counter set is used to normalize the
raw cputime obtained by the CPU timer deltas. This scaled cputime is
reported via the taskstats interface. The normal /proc/stat numbers
are based on the raw cputime and are not affected by the normalization.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Removes some functions that are not used anywhere:
idset_clear() idset_sch_get_first()
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tests have shown that 5 seconds is sometimes not enough for an IRQ
to arrive (especially when the device is doing garbage collection).
Let's wait a little longer.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull percpu consistent-ops changes from Tejun Heo:
"Way back, before the current percpu allocator was implemented, static
and dynamic percpu memory areas were allocated and handled separately
and had their own accessors. The distinction has been gone for many
years now; however, the now duplicate two sets of accessors remained
with the pointer based ones - this_cpu_*() - evolving various other
operations over time. During the process, we also accumulated other
inconsistent operations.
This pull request contains Christoph's patches to clean up the
duplicate accessor situation. __get_cpu_var() uses are replaced with
with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().
Unfortunately, the former sometimes is tricky thanks to C being a bit
messy with the distinction between lvalues and pointers, which led to
a rather ugly solution for cpumask_var_t involving the introduction of
this_cpu_cpumask_var_ptr().
This converts most of the uses but not all. Christoph will follow up
with the remaining conversions in this merge window and hopefully
remove the obsolete accessors"
* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
irqchip: Properly fetch the per cpu offset
percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
Revert "powerpc: Replace __get_cpu_var uses"
percpu: Remove __this_cpu_ptr
clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
sparc: Replace __get_cpu_var uses
avr32: Replace __get_cpu_var with __this_cpu_write
blackfin: Replace __get_cpu_var uses
tile: Use this_cpu_ptr() for hardware counters
tile: Replace __get_cpu_var uses
powerpc: Replace __get_cpu_var uses
alpha: Replace __get_cpu_var
ia64: Replace __get_cpu_var uses
s390: cio driver &__get_cpu_var replacements
s390: Replace __get_cpu_var uses
mips: Replace __get_cpu_var uses
MIPS: Replace __get_cpu_var uses in FPU emulator.
arm: Replace __this_cpu_ptr with raw_cpu_ptr
...
Merge second patch-bomb from Andrew Morton:
- a few hotfixes
- drivers/dma updates
- MAINTAINERS updates
- Quite a lot of lib/ updates
- checkpatch updates
- binfmt updates
- autofs4
- drivers/rtc/
- various small tweaks to less used filesystems
- ipc/ updates
- kernel/watchdog.c changes
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits)
mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
kernel/param: consolidate __{start,stop}___param[] in <linux/moduleparam.h>
ia64: remove duplicate declarations of __per_cpu_start[] and __per_cpu_end[]
frv: remove unused declarations of __start___ex_table and __stop___ex_table
kvm: ensure hard lockup detection is disabled by default
kernel/watchdog.c: control hard lockup detection default
staging: rtl8192u: use %*pEn to escape buffer
staging: rtl8192e: use %*pEn to escape buffer
staging: wlan-ng: use %*pEhp to print SN
lib80211: remove unused print_ssid()
wireless: hostap: proc: print properly escaped SSID
wireless: ipw2x00: print SSID via %*pE
wireless: libertas: print esaped string via %*pE
lib/vsprintf: add %*pE[achnops] format specifier
lib / string_helpers: introduce string_escape_mem()
lib / string_helpers: refactoring the test suite
lib / string_helpers: move documentation to c-file
include/linux: remove strict_strto* definitions
arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggable
fs: check bh blocknr earlier when searching lru
...
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics and
a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp
was renamed to strncasecmp, and strnicmp made into a wrapper for the new
strncasecmp to avoid breaking existing users.
To allow the compat wrapper strnicmp to be removed at some point in the
future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the nohz_delay bit from the s390_idle data structure to the
per-cpu flags. Clear the nohz delay flag in __cpu_disable and
remove the cpu hotplug notifier that used to do this.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Users of qdio buffers employ different strategies to manage these
buffers. The qeth driver uses huge contiguous buffers which leads
to high order allocations with all their downsides.
This patch provides helpers to allocate, free, and reset arrays of
qdio buffers using non contiguous pages.
Reviewed-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
To ungroup and deregister the group device always use the
ccwgroup_ungroup wrapper.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Since commit 0b60f9ead5
"s390: use device_remove_file_self() instead of device_schedule_callback()"
the return code of ccwgroup_ungroup_store is uninitialized. Make
sure the rc is always initialized.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Commit 0b60f9ead5
"s390: use device_remove_file_self() instead of device_schedule_callback()"
changed ccwgroup to use an extra work queue instead of
device_schedule_callback. This function obtained an extra device
reference for its async work which is missing in the new implementation
and results in a "freeing memory with a lock still held" BUG. Fix
this by obtaining an extra reference for the async work.
Reported-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Keep the per-device dbf entries until module is removed, with
proper error checking for debug feature setup.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Currently we set the device name at the time we call device_add after
we receive the interrupt for the first I/O. When something is not working
as expected during that first I/O (e.g. we don't receive an interrupt) we
print a message including the device name which has not yet been
initialized.
Set the device name after calling device_initialize (prior to starting
the first I/O) so that we have the name present if some unexpected error
occurs during that first I/O.
Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reported-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
airq_iv_(alloc|free) is called by some users with interrupts enabled
and by some with interrupts disabled which leads to the following
lockdep warning:
[ INFO: possible irq lock inversion dependency detected ]
3.14.0-15249-gbf29b7b-dirty #25 Not tainted
---------------------------------------------------------
insmod/2108 just changed the state of lock:
(&(&iv->lock)->rlock){+.....}, at: [<000000000046ee3e>] airq_iv_alloc+0x62/0x228
but this lock was taken by another, HARDIRQ-READ-safe lock in the past:
(&info->lock){.-.-..}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&(&iv->lock)->rlock);
local_irq_disable();
lock(&info->lock);
lock(&(&iv->lock)->rlock);
<Interrupt>
lock(&info->lock);
*** DEADLOCK ***
Although this is a false alarm (since each airq user consistently
calls these functions from the same context) fix this by ensuring
that interrupts are disabled when the airq lock is held.
Reported-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott
Cornelia Huck
Joe Perches
Martin Schwidefsky
Julian Wiedmann
Greg Kroah-Hartman
Kees Cook
Linus Torvalds
Jason J. Herne
Dong Jia Shi
Bhumika Goyal
Arvind Yadav
Jens Axboe
Christoph Hellwig
Heiko Carstens
Ingo Molnar
Peter Oberparleiter
Paul Gortmaker
Ursula Braun
Bhaktipriya Shridhar
Daniel van Gerpen
Markus Elfring
Pierre Morel
Eugene Crosser
Peter Senna Tschudin
Rickard Strandqvist
Rasmus Villemoes
Christoph Lameter
Stefan Raspl