Граф коммитов

139 Коммитов

Автор SHA1 Сообщение Дата
Eilon Greenstein c1accad323 bnx2x: Version update
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:49 -08:00
Eilon Greenstein 0a64ea5748 bnx2x: Register dump
Adding "ethtool -d" support. Due to the complexity of the FW and HW, there are a
lot of different regions in the chip - to keep the code as clean as possible,
the ranges were put in an H file. Some areas cannot be read if the driver is
running - so by default, the driver will not access those areas - but any
programmer facing a problem will be able to easily manipulate the driver to
extract full dump. The full dump can also be used with kernel dump modules in
case of kernel panic.

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:48 -08:00
Eilon Greenstein c3eefaf676 bnx2x: Debug prints
Add the FP index to relevant debug prints and simply beautify some others

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:48 -08:00
Eilon Greenstein c016201c5c bnx2x: Whitespace
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:46 -08:00
Eilon Greenstein 762d5f6c95 bnx2x: Calling tx disable unconditionally
On unload, the FW assumes that no packets will be sent after the driver sends
the FW stop command. To ensure that, the driver must always call
netif_tx_disable

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:42 -08:00
Eilon Greenstein 490c3c9bf9 bnx2x: Using DMA engine
Using DMA engine (DMAE) to initialize large consecutive memories in the chip

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:41 -08:00
Eilon Greenstein 2059aba7e4 bnx2x: Missing module parameter description
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:40 -08:00
Eilon Greenstein 8534f32c2f bnx2x: napi_poll budget check
Check the napi_poll budget only when updating it. Also add a comment to explain
the rmb

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:39 -08:00
Eilon Greenstein 7961f79123 bnx2x: Unlimited Tx interrupt work
The Tx interrupt is very short and there is no need to limit it to a budget

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:39 -08:00
Eilon Greenstein 161197853d bnx2x: Add rmb to read status block indices on load
Add rmb to read status block indices on load

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:38 -08:00
Eilon Greenstein 6044735d8d bnx2x: Reduce the likelihood of smb_mb
As the comment explains, this smb_mb is needed only if the queue is stopped
(which is unlikely) so the barrier can be moved to that location

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:38 -08:00
Eilon Greenstein 98589bb109 bnx2x: Remove redundant smb_mb on unload
As noted by Ben Hutchings <bhutchings@solarflare.com>, these smb_mb are not
needed

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:36 -08:00
Eilon Greenstein 2b1440230a bnx2x: Version
And updating the year

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:32:01 -08:00
Eilon Greenstein 356e23850b bnx2x: Clean-up
Whitespaces, empty lines, 80 columns, indentations and removing redundant
parenthesis

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:58 -08:00
Eilon Greenstein f537225142 bnx2x: Comments and prints
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:57 -08:00
Eilon Greenstein 9898f86d39 bnx2x: Re-arrange module parameters
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:56 -08:00
Eilon Greenstein 359d8b1599 bnx2x: Moving includes
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:55 -08:00
Eilon Greenstein 8440d2b636 bnx2x: Driver dump
Re-arrange the driver debug print to support the Tx multi-queue and add support
for debug prints at the end of the ring (when start<end)

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:55 -08:00
Eilon Greenstein 4781bfad73 bnx2x: Sparse endianity annotation
Resolving the majority of the issues, but there are still some left for future
patches.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:53 -08:00
Eilon Greenstein 0626b89971 bnx2x: Removing redundant macros
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:51 -08:00
Eilon Greenstein b5bf9068eb bnx2x: Loopback in diag mode
When loading in diag mode, set the device to loopback instead of normal link and
then changing it to loopback mode

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:50 -08:00
Eilon Greenstein 3ce2c3f9a3 bnx2x: Using nvram default WoL config
The driver default WoL setting is set to the nvram default value

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:47 -08:00
Eilon Greenstein 3e5b510eb8 bnx2x: smp_mb and not just smp_rmb
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:46 -08:00
Eilon Greenstein 8b3a0f0ba3 bnx2x: Increasing FW timeout
When enabling many debug prints, it can take a while before processing an event.
To ease the debug process, allow bigger timeout before giving up

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:45 -08:00
Eilon Greenstein 36e552ab1a bnx2x: Returning EBUSY in debug mode as well
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:45 -08:00
Eilon Greenstein 8d5726c404 bnx2x: Manual setting for MRRS
Allows better debug capabilities if the user wants to force an MRRS value

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:42 -08:00
Eilon Greenstein c2c8b03e20 bnx2x: Pre emphasis configuration
Supporting non-default pre-emphasis settings for the internal and some external
PHYs

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:41 -08:00
Eilon Greenstein 2857718528 bnx2x: Supporting BCM8481 PHY
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:29 -08:00
Eilon Greenstein 46c6a67495 bnx2x: PHY lock list
Some dual port PHY require HW lock since they are used by both interfaces
(different driver instances). Since this list is getting longer, update a
parameter at load time instead of calculating it on runtime

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:26 -08:00
Eilon Greenstein 589abe3a0f bnx2x: Supporting BCM8726 PHY
Also adding the ability to recognize the optic module and disable it if it is
not authorized for safety reasons - since this feature might upset some users
which are willing to take the risk, it is optional and can be disabled by
setting an nvram bit (or a trivial driver patch to set this bit).
This dual port PHY requires special handling if the ports are swapped.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:24 -08:00
Eilon Greenstein 4acac6a53a bnx2x: GPIO accessories
A GPIO is used with the 8726 PHY. Adding the GPIO related functions in this

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:20 -08:00
Eilon Greenstein 87942b4678 bnx2x: Removing redundant device parameters
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:18 -08:00
Eilon Greenstein 35b19ba51c bnx2x: Removing the board type
There are too many different board types and this field is not scalable.
Removing it and making decisions according to other fields

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:15 -08:00
Eilon Greenstein 1c06328c03 bnx2x: Flow control enhancement
Setting better HW thresholds and enabling FW capabilities for better
enforcement. Also set the HW to more efficiently use the internal buffers if
this is a single port design

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:15 -08:00
Eilon Greenstein 8a1c38d17d bnx2x: BW shaper enhancements
Some of the configuration can be set when loading the device and shouldn't be
re-calculated after each link up indication since it is not dependent on the
link speed

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:14 -08:00
Eilon Greenstein 748e543974 bnx2x: Moving skb_record_rx_queue
Should be called for all incoming packets and not just for GRO packets

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:13 -08:00
Eilon Greenstein de832a55d2 bnx2x: Per queue statistics
Re-ordering the statistics to enhance readability and adding per queue
statistics (available via ethtool -S)

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:12 -08:00
Eilon Greenstein d3d4f49527 bnx2x: Removing microcode assertion check
This check is unreliable since latest MC can issue warnings on rare occasions
which are not fatal errors

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:10 -08:00
Eilon Greenstein f1ef27ef42 bnx2x: Disabling interrupts after iSCSI-boot
Before initializing the chip after iSCSI boot, the interrupts of the function
that was used to boot must be disabled. That means that the driver needs to set
the chip as if it is the iSCSI PCI function - this bug is exposed only with MSI

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:09 -08:00
Eilon Greenstein 0f00846deb bnx2x: System-page alignment
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:08 -08:00
Eilon Greenstein 8badd27aa0 bnx2x: MSI support
Enabling MSI on top of MSI-X and INTA. Also changing the module parameter to
allow choosing INTA or MSI even when MSI-X is available. The default status
block should not be reversed for endianity. Since MSI can issue
re-configuration, the interrupt disable function now requires mmiowb

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:05 -08:00
Eilon Greenstein 555f6c7837 bnx2x: Multi-queue
Adding Tx multi-queue and enabling multi-queue by default

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:31:05 -08:00
Eilon Greenstein 8d9c5f34a2 bnx2x: New FW
This is the FW blob and the relevant definitions without any logic. It
also contains the minimal mandatory code changes to work with this FW
but it does not contain enabling of the new features that this FW
provides.

This FW is needed for:
- More efficient multi-queue
- per queue statistics
- Big-endian issue with MSI
- Improved pause response

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 23:24:08 -08:00
David S. Miller 0c8dfc830a net: Add skb_record_rx_queue() calls to multiqueue capable drivers.
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-27 16:22:32 -08:00
David S. Miller 3eacdf58c2 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2009-01-26 17:43:16 -08:00
Vladislav Zolotarov e8b5fc514d bnx2x: tx_has_work should not wait for FW
The current tx_has_work waited until all packets sent by the driver
are marked as completed by the FW. This is too greedy and it causes
the bnx2x_poll to spin in vain. The driver should only check that all
packets FW already completed are freed - only in unload flow the
driver should make sure that transmit queue is empty

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26 12:36:42 -08:00
Eilon Greenstein 5422a22573 bnx2x: Version
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22 13:47:13 -08:00
Eilon Greenstein 3910c8ae44 bnx2x: loopback test failure
A link change interrupt might be queued and activated after the loopback was set
and it will cause the loopback to fail. The PHY lock should be kept until the
loopback test is over.

That implies that the bnx2x_test_link should used within the loopback function
and not bnx2x_wait_for_link since that function also takes the PHY link

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22 13:47:12 -08:00
Eilon Greenstein 5650d9d4cb bnx2x: Missing rmb when waiting for FW response
Waiting for the FW to response requires a memory barrier

Signed-off-by: Michal Kalderon <michals@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22 13:47:12 -08:00
Eilon Greenstein 7cde1c8b79 bnx2x: Calling napi_del
rmmod might hang without this patch since the reference counter is not going
down

Signed-off-by: Yitchak Gertner <gertner@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-22 13:47:11 -08:00