[BUG]
One run of btrfs/063 triggered the following lockdep warning:
============================================
WARNING: possible recursive locking detected
5.6.0-rc7-custom+ #48 Not tainted
--------------------------------------------
kworker/u24:0/7 is trying to acquire lock:
ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]
but task is already holding lock:
ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(sb_internal#2);
lock(sb_internal#2);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by kworker/u24:0/7:
#0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80
#1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80
#2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]
#3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs]
stack backtrace:
CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ #48
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
Call Trace:
dump_stack+0xc2/0x11a
__lock_acquire.cold+0xce/0x214
lock_acquire+0xe6/0x210
__sb_start_write+0x14e/0x290
start_transaction+0x66c/0x890 [btrfs]
btrfs_join_transaction+0x1d/0x20 [btrfs]
find_free_extent+0x1504/0x1a50 [btrfs]
btrfs_reserve_extent+0xd5/0x1f0 [btrfs]
btrfs_alloc_tree_block+0x1ac/0x570 [btrfs]
btrfs_copy_root+0x213/0x580 [btrfs]
create_reloc_root+0x3bd/0x470 [btrfs]
btrfs_init_reloc_root+0x2d2/0x310 [btrfs]
record_root_in_trans+0x191/0x1d0 [btrfs]
btrfs_record_root_in_trans+0x90/0xd0 [btrfs]
start_transaction+0x16e/0x890 [btrfs]
btrfs_join_transaction+0x1d/0x20 [btrfs]
btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs]
finish_ordered_fn+0x15/0x20 [btrfs]
btrfs_work_helper+0x116/0x9a0 [btrfs]
process_one_work+0x632/0xb80
worker_thread+0x80/0x690
kthread+0x1a3/0x1f0
ret_from_fork+0x27/0x50
It's pretty hard to reproduce, only one hit so far.
[CAUSE]
This is because we're calling btrfs_join_transaction() without re-using
the current running one:
btrfs_finish_ordered_io()
|- btrfs_join_transaction() <<< Call #1
|- btrfs_record_root_in_trans()
|- btrfs_reserve_extent()
|- btrfs_join_transaction() <<< Call #2
Normally such btrfs_join_transaction() call should re-use the existing
one, without trying to re-start a transaction.
But the problem is, in btrfs_join_transaction() call #1, we call
btrfs_record_root_in_trans() before initializing current::journal_info.
And in btrfs_join_transaction() call #2, we're relying on
current::journal_info to avoid such deadlock.
[FIX]
Call btrfs_record_root_in_trans() after we have initialized
current::journal_info.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At the point we add a root to the dead roots list we have no open inodes
for that root, so we need to hold a ref on that root to keep it from
disappearing.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are going to make root life be controlled soley by refcounting, and
inodes will be one of the things that hold a ref on the root. This
means we need to handle dropping the ino_cache_inode outside of the root
freeing logic, so move it into btrfs_drop_and_free_fs_root() so it is
cleaned up properly on unmount.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's no longer used following 30d40577e3 ("btrfs: reloc: Also queue
orphan reloc tree for cleanup to avoid BUG_ON()"), so just remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the non-prefixed version is a simple wrapper used to hide
the 4th argument of the prefixed version. This doesn't bring much value
in practice and only makes the code harder to follow by adding another
level of indirection. Rectify this by removing the __ prefix and
have only one public function to release bytes from a block reservation.
No semantic changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are new types and helpers that are supposed to be used in new code.
As a preparation to get rid of legacy types and API functions do
the conversion here.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The tree_log_mutex and reloc_mutex locks are properly nested so we can
simplify error handling and add labels for them. This reduces line count
of the function.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This commit flips the switch to start tracking/processing pinned extents
on a per-transaction basis. It mostly replaces all references from
btrfs_fs_info::(pinned_extents|freed_extents[]) to
btrfs_transaction::pinned_extents.
Two notable modifications that warrant explicit mention are changing
clean_pinned_extents to get a reference to the previously running
transaction. The other one is removal of call to
btrfs_destroy_pinned_extent since transactions are going to be cleaned
in btrfs_cleanup_one_transaction.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The status of aborted transaction can change between calls and it needs
to be accessed by READ_ONCE. Add a helper that also wraps the unlikely
hint.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that all callers of btrfs_get_fs_root are subsequently calling
btrfs_grab_fs_root and handling dropping the ref when they are done
appropriately, go ahead and push btrfs_grab_fs_root up into
btrfs_get_fs_root.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We create the snapshot and then use it for a bunch of things, we need to
hold a ref on it while we're messing with it.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All this does is call btrfs_get_fs_root() with check_ref == true. Just
use btrfs_get_fs_root() so we don't have a bunch of different helpers
that do the same thing.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We clean up the delayed references when we abort a transaction but we
leave the pending qgroup extent records behind, leaking memory.
This patch destroys the extent records when we destroy the delayed refs
and makes sure ensure they're gone before releasing the transaction.
Fixes: 3368d001ba ("btrfs: qgroup: Record possible quota-related extent for qgroup.")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
[ Rebased to latest upstream, remove to_qgroup() helper, use
rbtree_postorder_for_each_entry_safe() wrapper ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we abort a transaction we have the following sequence
if (!trans->dirty && list_empty(&trans->new_bgs))
return;
WRITE_ONCE(trans->transaction->aborted, err);
The idea being if we didn't modify anything with our trans handle then
we don't really need to abort the whole transaction, maybe the other
trans handles are fine and we can carry on.
However in the case of create_snapshot we add a pending_snapshot object
to our transaction and then commit the transaction. We don't actually
modify anything. sync() behaves the same way, attach to an existing
transaction and commit it. This means that if we have an IO error in
the right places we could abort the committing transaction with our
trans->dirty being not set and thus not set transaction->aborted.
This is a problem because in the create_snapshot() case we depend on
pending->error being set to something, or btrfs_commit_transaction
returning an error.
If we are not the trans handle that gets to commit the transaction, and
we're waiting on the commit to happen we get our return value from
cur_trans->aborted. If this was not set to anything because sync() hit
an error in the transaction commit before it could modify anything then
cur_trans->aborted would be 0. Thus we'd return 0 from
btrfs_commit_transaction() in create_snapshot.
This is a problem because we then try to do things with
pending_snapshot->snap, which will be NULL because we didn't create the
snapshot, and then we'll get a NULL pointer dereference like the
following
"BUG: kernel NULL pointer dereference, address: 00000000000001f0"
RIP: 0010:btrfs_orphan_cleanup+0x2d/0x330
Call Trace:
? btrfs_mksubvol.isra.31+0x3f2/0x510
btrfs_mksubvol.isra.31+0x4bc/0x510
? __sb_start_write+0xfa/0x200
? mnt_want_write_file+0x24/0x50
btrfs_ioctl_snap_create_transid+0x16c/0x1a0
btrfs_ioctl_snap_create_v2+0x11e/0x1a0
btrfs_ioctl+0x1534/0x2c10
? free_debug_processing+0x262/0x2a3
do_vfs_ioctl+0xa6/0x6b0
? do_sys_open+0x188/0x220
? syscall_trace_enter+0x1f8/0x330
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x4a/0x1b0
In order to fix this we need to make sure anybody who calls
commit_transaction has trans->dirty set so that they properly set the
trans->transaction->aborted value properly so any waiters know bad
things happened.
This was found while I was running generic/475 with my modified
fsstress, it reproduced within a few runs. I ran with this patch all
night and didn't see the problem again.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we fsync on a subvolume and create a log root for that volume, and
then later delete that subvolume we'll never clean up its log root. Fix
this by making switch_commit_roots free the log for any dropped roots we
encounter. The extra churn is because we need a btrfs_trans_handle, not
the btrfs_transaction.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The type name is misleading, a single entry is named 'cache' while this
normally means a collection of objects. Rename that everywhere. Also the
identifier was quite long, making function prototypes harder to format.
Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is used only during the final phase of freespace cache
writeout. This is necessary since using the plain btrfs_join_transaction
api is deadlock prone. The deadlock looks like:
T1:
btrfs_commit_transaction
commit_cowonly_roots
btrfs_write_dirty_block_groups
btrfs_wait_cache_io
__btrfs_wait_cache_io
btrfs_wait_ordered_range <-- Triggers ordered IO for freespace
inode and blocks transaction commit
until freespace cache writeout
T2: <-- after T1 has triggered the writeout
finish_ordered_fn
btrfs_finish_ordered_io
btrfs_join_transaction <--- this would block waiting for current
transaction to commit, but since trans
commit is waiting for this writeout to
finish
The special purpose functions prevents it by simply skipping the "wait
for writeout" since it's guaranteed the transaction won't proceed until
we are done.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The state was introduced in commit 4a9d8bdee3 ("Btrfs: make the state
of the transaction more readable"), then in commit 302167c50b
("btrfs: don't end the transaction for delayed refs in throttle") the
state is completely removed.
So we can just clean up the state since it's only compared but never
set.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add an overview of the basic btrfs transaction transitions, including
the following states:
- No transaction states
- Transaction N [[TRANS_STATE_RUNNING]]
- Transaction N [[TRANS_STATE_COMMIT_START]]
- Transaction N [[TRANS_STATE_COMMIT_DOING]]
- Transaction N [[TRANS_STATE_UNBLOCKED]]
- Transaction N [[TRANS_STATE_COMPLETED]]
For each state, the comment will include:
- Basic explaination about current state
- How to go next stage
- What will happen if we call various start_transaction() functions
- Relationship to transaction N+1
This doesn't provide tech details, but serves as a cheat sheet for
reader to get into the code a little easier.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's not used ouside of transaction.c
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A recent patch to btrfs showed that there was at least 1 case where a
nested transaction was committed. Nested transaction in this case means
a code which has a transaction handle calls some function which in turn
obtains a copy of the same transaction handle. In such cases the correct
thing to do is for the lower callee to call btrfs_end_transaction which
contains appropriate checks so as to not commit the transaction which
will result in stale trans handler for the caller.
To catch such cases add an assert in btrfs_commit_transaction ensuring
btrfs_trans_handle::use_count is always 1.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The file ctree.h serves as a header for everything and has become quite
bloated. Split some helpers that are generic and create a new file that
should be the catch-all for code that's not btrfs-specific.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_calc_trunc_metadata_size differs from trans_metadata_size in that
it doesn't take into account any splitting at the levels, because
truncate will never split nodes. However truncate _and_ changing will
never split nodes, so rename btrfs_calc_trunc_metadata_size to
btrfs_calc_metadata_size. Also btrfs_calc_trans_metadata_size is purely
for inserting items, so rename this to btrfs_calc_insert_metadata_size.
Making these clearer will help when I start using them differently in
upcoming patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is prep work for moving all of the block group cache code into its
own file.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor comment updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
The fiemap handler locks a file range that can have unflushed delalloc,
and after locking the range, it tries to attach to a running transaction.
If the running transaction started its commit, that is, it is in state
TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the
flushoncommit option or the transaction is creating a snapshot for the
subvolume that contains the file that fiemap is operating on, we end up
deadlocking. This happens because fiemap is blocked on the transaction,
waiting for it to complete, and the transaction is waiting for the flushed
dealloc to complete, which requires locking the file range that the fiemap
task already locked. The following stack traces serve as an example of
when this deadlock happens:
(...)
[404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs]
[404571.515956] Call Trace:
[404571.516360] ? __schedule+0x3ae/0x7b0
[404571.516730] schedule+0x3a/0xb0
[404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs]
[404571.517465] ? remove_wait_queue+0x60/0x60
[404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs]
[404571.518202] normal_work_helper+0xea/0x530 [btrfs]
[404571.518566] process_one_work+0x21e/0x5c0
[404571.518990] worker_thread+0x4f/0x3b0
[404571.519413] ? process_one_work+0x5c0/0x5c0
[404571.519829] kthread+0x103/0x140
[404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70
[404571.520565] ret_from_fork+0x3a/0x50
[404571.520915] kworker/u8:6 D 0 31651 2 0x80004000
[404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs]
(...)
[404571.537000] fsstress D 0 13117 13115 0x00004000
[404571.537263] Call Trace:
[404571.537524] ? __schedule+0x3ae/0x7b0
[404571.537788] schedule+0x3a/0xb0
[404571.538066] wait_current_trans+0xc8/0x100 [btrfs]
[404571.538349] ? remove_wait_queue+0x60/0x60
[404571.538680] start_transaction+0x33c/0x500 [btrfs]
[404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs]
[404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs]
[404571.539866] extent_fiemap+0x2ce/0x650 [btrfs]
[404571.540170] do_vfs_ioctl+0x526/0x6f0
[404571.540436] ksys_ioctl+0x70/0x80
[404571.540734] __x64_sys_ioctl+0x16/0x20
[404571.540997] do_syscall_64+0x60/0x1d0
[404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe
(...)
[404571.543729] btrfs D 0 14210 14208 0x00004000
[404571.544023] Call Trace:
[404571.544275] ? __schedule+0x3ae/0x7b0
[404571.544526] ? wait_for_completion+0x112/0x1a0
[404571.544795] schedule+0x3a/0xb0
[404571.545064] schedule_timeout+0x1ff/0x390
[404571.545351] ? lock_acquire+0xa6/0x190
[404571.545638] ? wait_for_completion+0x49/0x1a0
[404571.545890] ? wait_for_completion+0x112/0x1a0
[404571.546228] wait_for_completion+0x131/0x1a0
[404571.546503] ? wake_up_q+0x70/0x70
[404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs]
[404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs]
[404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs]
[404571.547703] ? remove_wait_queue+0x60/0x60
[404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs]
[404571.548226] ? __sb_start_write+0xd4/0x1c0
[404571.548512] ? mnt_want_write_file+0x24/0x50
[404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs]
[404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs]
[404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs]
[404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0
[404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0
[404571.550064] ? __handle_mm_fault+0xe3e/0x11f0
[404571.550306] ? do_raw_spin_unlock+0x49/0xc0
[404571.550608] ? _raw_spin_unlock+0x24/0x30
[404571.550976] ? __handle_mm_fault+0xedf/0x11f0
[404571.551319] ? do_vfs_ioctl+0xa2/0x6f0
[404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[404571.552087] do_vfs_ioctl+0xa2/0x6f0
[404571.552355] ksys_ioctl+0x70/0x80
[404571.552621] __x64_sys_ioctl+0x16/0x20
[404571.552864] do_syscall_64+0x60/0x1d0
[404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe
(...)
If we were joining the transaction instead of attaching to it, we would
not risk a deadlock because a join only blocks if the transaction is in a
state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc
flush performed by a transaction is done before it reaches that state,
when it is in the state TRANS_STATE_COMMIT_START. However a transaction
join is intended for use cases where we do modify the filesystem, and
fiemap only needs to peek at delayed references from the current
transaction in order to determine if extents are shared, and, besides
that, when there is no current transaction or when it blocks to wait for
a current committing transaction to complete, it creates a new transaction
without reserving any space. Such unnecessary transactions, besides doing
unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary
rotation of the precious backup roots.
So fix this by adding a new transaction join variant, named join_nostart,
which behaves like the regular join, but it does not create a transaction
when none currently exists or after waiting for a committing transaction
to complete.
Fixes: 03628cdbc6 ("Btrfs: do not start a transaction during fiemap")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When one transaction is finishing its commit, it is possible for another
transaction to start and enter its initial commit phase as well. If the
first ends up getting aborted, we have a small time window where the second
transaction commit does not notice that the previous transaction aborted
and ends up committing, writing a superblock that points to btrees that
reference extent buffers (nodes and leafs) that were not persisted to disk.
The consequence is that after mounting the filesystem again, we will be
unable to load some btree nodes/leafs, either because the content on disk
is either garbage (or just zeroes) or corresponds to the old content of a
previouly COWed or deleted node/leaf, resulting in the well known error
messages "parent transid verify failed on ...".
The following sequence diagram illustrates how this can happen.
CPU 1 CPU 2
<at transaction N>
btrfs_commit_transaction()
(...)
--> sets transaction state to
TRANS_STATE_UNBLOCKED
--> sets fs_info->running_transaction
to NULL
(...)
btrfs_start_transaction()
start_transaction()
wait_current_trans()
--> returns immediately
because
fs_info->running_transaction
is NULL
join_transaction()
--> creates transaction N + 1
--> sets
fs_info->running_transaction
to transaction N + 1
--> adds transaction N + 1 to
the fs_info->trans_list list
--> returns transaction handle
pointing to the new
transaction N + 1
(...)
btrfs_sync_file()
btrfs_start_transaction()
--> returns handle to
transaction N + 1
(...)
btrfs_write_and_wait_transaction()
--> writeback of some extent
buffer fails, returns an
error
btrfs_handle_fs_error()
--> sets BTRFS_FS_STATE_ERROR in
fs_info->fs_state
--> jumps to label "scrub_continue"
cleanup_transaction()
btrfs_abort_transaction(N)
--> sets BTRFS_FS_STATE_TRANS_ABORTED
flag in fs_info->fs_state
--> sets aborted field in the
transaction and transaction
handle structures, for
transaction N only
--> removes transaction from the
list fs_info->trans_list
btrfs_commit_transaction(N + 1)
--> transaction N + 1 was not
aborted, so it proceeds
(...)
--> sets the transaction's state
to TRANS_STATE_COMMIT_START
--> does not find the previous
transaction (N) in the
fs_info->trans_list, so it
doesn't know that transaction
was aborted, and the commit
of transaction N + 1 proceeds
(...)
--> sets transaction N + 1 state
to TRANS_STATE_UNBLOCKED
btrfs_write_and_wait_transaction()
--> succeeds writing all extent
buffers created in the
transaction N + 1
write_all_supers()
--> succeeds
--> we now have a superblock on
disk that points to trees
that refer to at least one
extent buffer that was
never persisted
So fix this by updating the transaction commit path to check if the flag
BTRFS_FS_STATE_TRANS_ABORTED is set on fs_info->fs_state if after setting
the transaction to the TRANS_STATE_COMMIT_START we do not find any previous
transaction in the fs_info->trans_list. If the flag is set, just fail the
transaction commit with -EROFS, as we do in other places. The exact error
code for the previous transaction abort was already logged and reported.
Fixes: 49b25e0540 ("btrfs: enhance transaction abort infrastructure")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move this into transaction.c with the rest of the transaction related
code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The member num_dirty_bgs of struct btrfs_transaction is not used anymore,
it is set and incremented but nothing reads its value anymore. Its last
read use was removed by commit 64403612b7 ("btrfs: rework
btrfs_check_space_for_delayed_refs"). So just remove that member.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The pending chunks list contains chunks that are allocated in the
current transaction but haven't been created yet. The pinned chunks
list contains chunks that are being released in the current transaction.
Both describe chunks that are not reflected on disk as in use but are
unavailable just the same.
The pending chunks list is anchored by the transaction handle, which
means that we need to hold a reference to a transaction when working
with the list.
The way we use them is by iterating over both lists to perform
comparisons on the stripes they describe for each device. This is
backwards and requires that we keep a transaction handle open while
we're trimming.
This patchset adds an extent_io_tree to btrfs_device that maintains
the allocation state of the device. Extents are set dirty when
chunks are first allocated -- when the extent maps are added to the
mapping tree. They're cleared when last removed -- when the extent
maps are removed from the mapping tree. This matches the lifespan
of the pending and pinned chunks list and allows us to do trims
on unallocated space safely without pinning the transaction for what
may be a lengthy operation. We can also use this io tree to mark
which chunks have already been trimmed so we don't repeat the operation.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is going to be used to clear out the device extent
allocation information. Give it a more generic name and export it. This
is in preparation to replacing the pending/pinned chunk lists with an
extent tree. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We currently overload the pending_chunks list to handle updating
btrfs_device->commit_bytes used. We don't actually care about the
extent mapping or even the device mapping for the chunk - we just need
the device, and we can end up processing it multiple times. The
fs_devices->resized_list does more or less the same thing, but with the
disk size. They are called consecutively during commit and have more or
less the same purpose.
We can combine the two lists into a single list that attaches to the
transaction and contains a list of devices that need updating. Since we
always add the device to a list when we change bytes_used or
disk_total_size, there's no harm in copying both values at once.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs has the following different extent_io_trees used:
- fs_info::free_extents[2]
- btrfs_inode::io_tree - for both normal inodes and the btree inode
- btrfs_inode::io_failure_tree
- btrfs_transaction::dirty_pages
- btrfs_root::dirty_log_pages
If we want to trace changes in those trees, it will be pretty hard to
distinguish them.
Instead of using hard-to-read pointer address, this patch will introduce
a new member extent_io_tree::owner to track the owner.
This modification needs all the callers of extent_io_tree_init() to
accept a new parameter @owner.
This patch provides the basis for later trace events.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch will add a new member fs_info to extent_io_tree.
This provides the basis for later trace events to distinguish the output
between different btrfs filesystems. While this increases the size of
the structure, we want to know the source of the trace events and
passing the fs_info as an argument to all contexts is not possible.
The selftests are now allowed to set it to NULL as they don't use the
tracepoints.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we are mixing buffered writes with direct IO writes against the same
file and snapshotting is happening concurrently, we can end up with a
corrupt file content in the snapshot. Example:
1) Inode/file is empty.
2) Snapshotting starts.
2) Buffered write at offset 0 length 256Kb. This updates the i_size of the
inode to 256Kb, disk_i_size remains zero. This happens after the task
doing the snapshot flushes all existing delalloc.
3) DIO write at offset 256Kb length 768Kb. Once the ordered extent
completes it sets the inode's disk_i_size to 1Mb (256Kb + 768Kb) and
updates the inode item in the fs tree with a size of 1Mb (which is
the value of disk_i_size).
4) The dealloc for the range [0, 256Kb[ did not start yet.
5) The transaction used in the DIO ordered extent completion, which updated
the inode item, is committed by the snapshotting task.
6) Snapshot creation completes.
7) Dealloc for the range [0, 256Kb[ is flushed.
After that when reading the file from the snapshot we always get zeroes for
the range [0, 256Kb[, the file has a size of 1Mb and the data written by
the direct IO write is found. From an application's point of view this is
a corruption, since in the source subvolume it could never read a version
of the file that included the data from the direct IO write without the
data from the buffered write included as well. In the snapshot's tree,
file extent items are missing for the range [0, 256Kb[.
The issue, obviously, does not happen when using the -o flushoncommit
mount option.
Fix this by flushing delalloc for all the roots that are about to be
snapshotted when committing a transaction. This guarantees total ordering
when updating the disk_i_size of an inode since the flush for dealloc is
done when a transaction is in the TRANS_STATE_COMMIT_START state and wait
is done once no more external writers exist. This is similar to what we
do when using the flushoncommit mount option, but we do it only if the
transaction has snapshots to create and only for the roots of the
subvolumes to be snapshotted. The bulk of the dealloc is flushed in the
snapshot creation ioctl, so the flush work we do inside the transaction
is minimized.
This issue, involving buffered and direct IO writes with snapshotting, is
often triggered by fstest btrfs/078, and got reported by fsck when not
using the NO_HOLES features, for example:
$ cat results/btrfs/078.full
(...)
_check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent
*** fsck.btrfs output ***
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space cache
[4/7] checking fs roots
root 258 inode 264 errors 100, file extent discount
Found file extent holes:
start: 524288, len: 65536
ERROR: errors found in fs roots
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_set_lock_blocking is now only a simple wrapper around
btrfs_set_lock_blocking_write. The name does not bring any semantic
value that could not be inferred from the new function so there's no
point keeping it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
To allow delayed subtree swap rescan, btrfs needs to record per-root
information about which tree blocks get swapped. This patch introduces
the required infrastructure.
The designed workflow will be:
1) Record the subtree root block that gets swapped.
During subtree swap:
O = Old tree blocks
N = New tree blocks
reloc tree subvolume tree X
Root Root
/ \ / \
NA OB OA OB
/ | | \ / | | \
NC ND OE OF OC OD OE OF
In this case, NA and OA are going to be swapped, record (NA, OA) into
subvolume tree X.
2) After subtree swap.
reloc tree subvolume tree X
Root Root
/ \ / \
OA OB NA OB
/ | | \ / | | \
OC OD OE OF NC ND OE OF
3a) COW happens for OB
If we are going to COW tree block OB, we check OB's bytenr against
tree X's swapped_blocks structure.
If it doesn't fit any, nothing will happen.
3b) COW happens for NA
Check NA's bytenr against tree X's swapped_blocks, and get a hit.
Then we do subtree scan on both subtrees OA and NA.
Resulting 6 tree blocks to be scanned (OA, OC, OD, NA, NC, ND).
Then no matter what we do to subvolume tree X, qgroup numbers will
still be correct.
Then NA's record gets removed from X's swapped_blocks.
4) Transaction commit
Any record in X's swapped_blocks gets removed, since there is no
modification to swapped subtrees, no need to trigger heavy qgroup
subtree rescan for them.
This will introduce 128 bytes overhead for each btrfs_root even qgroup
is not enabled. This is to reduce memory allocations and potential
failures.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The first thing we do is loop through the list, this
if (!list_empty())
btrfs_create_pending_block_groups();
thing is just wasted space.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously callers to btrfs_end_transaction_throttle() would commit the
transaction if there wasn't enough delayed refs space. This happens in
relocation, and if the fs is relatively empty we'll run out of delayed
refs space basically immediately, so we'll just be stuck in this loop of
committing the transaction over and over again.
This code existed because we didn't have a good feedback mechanism for
running delayed refs, but with the delayed refs rsv we do now. Delete
this throttling code and let the btrfs_start_transaction() in relocation
deal with putting pressure on the delayed refs infrastructure. With
this patch we no longer take 5 minutes to balance a metadata only fs.
Qu has submitted a fstest to catch slow balance or excessive transaction
commits. Steps to reproduce:
* create subvolume
* create many (eg. 16000) inlined files, of size 2KiB
* iteratively snapshot and touch several files to trigger metadata
updates
* start balance -m
Reported-by: Qu Wenruo <wqu@suse.com>
Fixes: 64403612b7 ("btrfs: rework btrfs_check_space_for_delayed_refs")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add tags and steps to reproduce ]
Signed-off-by: David Sterba <dsterba@suse.com>
The typos accumulate over time so once in a while time they get fixed in
a large patch.
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Over the years we have built up a lot of infrastructure to keep delayed
refs in check, mostly by running them at btrfs_end_transaction() time.
We have a lot of different maths we do to figure out how much, if we
should do it inline or async, etc. This existed because we had no
feedback mechanism to force the flushing of delayed refs when they
became a problem. However with the enospc flushing infrastructure in
place for flushing delayed refs when they put too much pressure on the
enospc system we have this problem solved. Rip out all of this code as
it is no longer needed.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now with the delayed_refs_rsv we can now know exactly how much pending
delayed refs space we need. This means we can drastically simplify
btrfs_check_space_for_delayed_refs by simply checking how much space we
have reserved for the global rsv (which acts as a spill over buffer) and
the delayed refs rsv. If our total size is beyond that amount then we
know it's time to commit the transaction and stop any more delayed refs
from being generated.
With the introduction of dealyed_refs_rsv infrastructure, namely
btrfs_update_delayed_refs_rsv we now know exactly how much pending
delayed refs space is required.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Traditionally we've had voodoo in btrfs to account for the space that
delayed refs may take up by having a global_block_rsv. This works most
of the time, except when it doesn't. We've had issues reported and seen
in production where sometimes the global reserve is exhausted during
transaction commit before we can run all of our delayed refs, resulting
in an aborted transaction. Because of this voodoo we have equally
dubious flushing semantics around throttling delayed refs which we often
get wrong.
So instead give them their own block_rsv. This way we can always know
exactly how much outstanding space we need for delayed refs. This
allows us to make sure we are constantly filling that reservation up
with space, and allows us to put more precise pressure on the enospc
system. Instead of doing math to see if its a good time to throttle,
the normal enospc code will be invoked if we have a lot of delayed refs
pending, and they will be run via the normal flushing mechanism.
For now the delayed_refs_rsv will hold the reservations for the delayed
refs, the block group updates, and deleting csums. We could have a
separate rsv for the block group updates, but the csum deletion stuff is
still handled via the delayed_refs so that will stay there.
Historical background:
The global reserve has grown to cover everything we don't reserve space
explicitly for, and we've grown a lot of weird ad-hoc heuristics to know
if we're running short on space and when it's time to force a commit. A
failure rate of 20-40 file systems when we run hundreds of thousands of
them isn't super high, but cleaning up this code will make things less
ugly and more predictible.
Thus the delayed refs rsv. We always know how many delayed refs we have
outstanding, and although running them generates more we can use the
global reserve for that spill over, which fits better into it's desired
use than a full blown reservation. This first approach is to simply
take how many times we're reserving space for and multiply that by 2 in
order to save enough space for the delayed refs that could be generated.
This is a niave approach and will probably evolve, but for now it works.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com> # high-level review
[ added background notes from the cover letter ]
Signed-off-by: David Sterba <dsterba@suse.com>
When it was introduced in commit f094ac32ab ("Btrfs: fix NULL pointer
after aborting a transaction"), it was not used.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Tracking pending ordered extents per transaction was introduced in commit
50d9aa99bd ("Btrfs: make sure logged extents complete in the current
transaction V3") and later updated in commit 161c3549b4 ("Btrfs: change
how we wait for pending ordered extents").
However now that on fsync we always wait for ordered extents to complete
before logging, done in commit 5636cf7d6d ("btrfs: remove the logged
extents infrastructure"), we no longer need the stuff to track for pending
ordered extents, which was not completely removed in the mentioned commit.
So remove the remaining of the pending ordered extents infrastructure.
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This could result in a really bad case where we do something like
evict
evict_refill_and_join
btrfs_commit_transaction
btrfs_run_delayed_iputs
evict
evict_refill_and_join
btrfs_commit_transaction
... forever
We have plenty of other places where we run delayed iputs that are much
safer, let those do the work.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo
Josef Bacik
Nikolay Borisov
Andy Shevchenko
David Sterba
Jeff Mahoney
Filipe Manana
Andrea Gelmini
Josef Bacik
Lu Fengqi