Incidentally, ITER_XARRAY did *not* free the sucker in case when
iter_xarray_populate_pages() returned 0...
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All their callers are next to each other; all of them
want the total amount of pages and, possibly, the
offset in the partial final buffer.
Combine into a new helper (pipe_npages()), fix the
bogosity in pipe_space_for_user(), while we are at it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fold pipe_truncate() into it, clean up. We can release buffers
in the same loop where we walk backwards to the iterator beginning
looking for the place where the new position will be.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
instead of setting ->iov_offset for new position and calling
pipe_truncate() to adjust ->len of the last buffer and discard
everything after it, adjust ->len at the same time we set ->iov_offset
and use pipe_discard_from() to deal with buffers past that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
it's only used to get to the partial buffer we can add to,
and that's always the last one, i.e. pipe->head - 1.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Expand the only remaining call of push_pipe() (in
__pipe_get_pages()), combine it with the page-collecting loop there.
Note that the only reason it's not a loop doing append_pipe() is
that append_pipe() is advancing, while iov_iter_get_pages() is not.
As soon as it switches to saner semantics, this thing will switch
to using append_pipe().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
New helper: append_pipe(). Extends the last buffer if possible,
allocates a new one otherwise. Returns page and offset in it
on success, NULL on failure. iov_iter is advanced past the
data we've got.
Use that instead of push_pipe() in copy-to-pipe primitives;
they get simpler that way. Handling of short copy (in "mc" one)
is done simply by iov_iter_revert() - iov_iter is in consistent
state after that one, so we can use that.
[Fix for braino caught by Liu Xinpeng <liuxp11@chinatelecom.cn> folded in]
[another braino fix, this time in copy_pipe_to_iter() and pipe_zero();
caught by testcase from Hugh Dickins]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There are only two kinds of pipe_buffer in the area used by ITER_PIPE.
1) anonymous - copy_to_iter() et.al. end up creating those and copying
data there. They have zero ->offset, and their ->ops points to
default_pipe_page_ops.
2) zero-copy ones - those come from copy_page_to_iter(), and page
comes from caller. ->offset is also caller-supplied - it might be
non-zero. ->ops points to page_cache_pipe_buf_ops.
Move creation and insertion of those into helpers - push_anon(pipe, size)
and push_page(pipe, page, offset, size) resp., separating them from
the "could we avoid creating a new buffer by merging with the current
head?" logics.
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
pipe_buffer instances of a pipe are organized as a ring buffer,
with power-of-2 size. Indices are kept *not* reduced modulo ring
size, so the buffer refered to by index N is
pipe->bufs[N & (pipe->ring_size - 1)].
Ring size can change over the lifetime of a pipe, but not while
the pipe is locked. So for any iov_iter primitives it's a constant.
Original conversion of pipes to this layout went overboard trying
to microoptimize that - calculating pipe->ring_size - 1, storing
it in a local variable and using through the function. In some
cases it might be warranted, but most of the times it only
obfuscates what's going on in there.
Introduce a helper (pipe_buf(pipe, N)) that would encapsulate
that and use it in the obvious cases. More will follow...
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use pipe_discard_from() explicitly in generic_file_read_iter(); don't bother
with rather non-obvious use of iov_iter_advance() in there.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Equivalent of single-segment iovec. Initialized by iov_iter_ubuf(),
checked for by iter_is_ubuf(), otherwise behaves like ITER_IOVEC
ones.
We are going to expose the things like ->write_iter() et.al. to those
in subsequent commits.
New predicate (user_backed_iter()) that is true for ITER_IOVEC and
ITER_UBUF; places like direct-IO handling should use that for
checking that pages we modify after getting them from iov_iter_get_pages()
would need to be dirtied.
DO NOT assume that replacing iter_is_iovec() with user_backed_iter()
will solve all problems - there's code that uses iter_is_iovec() to
decide how to poke around in iov_iter guts and for that the predicate
replacement obviously won't suffice.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
What happens if a thread is preempted after mapping pages with
kmap_local_page() was questioned recently.[1]
Commit f3ba3c710a ("mm/highmem: Provide kmap_local*") from Thomas
Gleixner explains clearly that on context switch, the maps of an outgoing
task are removed and the map of the incoming task are restored and that
kmap_local_page() can be invoked from both preemptible and atomic
contexts.[2]
Therefore, for the purpose to make it clearer that users can call
kmap_local_page() from contexts that allow preemption, rework a couple of
sentences and add further information in highmem.rst.
[1] https://lore.kernel.org/lkml/5303077.Sb9uPGUboI@opensuse/
[2] https://lore.kernel.org/all/20201118204007.468533059@linutronix.de/
Link: https://lkml.kernel.org/r/20220728154844.10874-8-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmap_local_page() should always be preferred in place of kmap() and
kmap_atomic(). "Only use when really necessary." is not consistent with
the Documentation/mm/highmem.rst and these kdocs it embeds.
Therefore, delete the above-mentioned sentence from kdocs.
Link: https://lkml.kernel.org/r/20220728154844.10874-7-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The reasoning for converting kmap() to kmap_local_page() was questioned
recently.[1]
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) kmap() also requires global TLB invalidation when
its pool wraps and it might block when the mapping space is fully utilized
until a slot becomes available.
Warn users to avoid the use of kmap() and instead use kmap_local_page(),
by designing their code to map pages in the same context the mapping will
be used.
[1] https://lore.kernel.org/lkml/1891319.taCxCBeP46@opensuse/
Link: https://lkml.kernel.org/r/20220728154844.10874-6-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Users of kmap_local_page() must be absolutely sure to not hand kernel
virtual address obtained calling kmap_local_page() on highmem pages to
other contexts because those pointers are thread local, therefore, they
are no longer valid across different contexts.
Extend the documentation of kmap_local_page() to warn users about the
above-mentioned potential invalid use of pointers returned by
kmap_local_page().
Link: https://lkml.kernel.org/r/20220728154844.10874-5-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is no need to kmap*() pages which are guaranteed to come from
ZONE_NORMAL (or lower). Linux has currently several call sites of
kmap{,_atomic,_local_page}() on pages which are clearly known which can't
come from ZONE_HIGHMEM.
Therefore, add a paragraph to highmem.rst, to explain better that a plain
page_address() may be used for getting the address of pages which cannot
come from ZONE_HIGHMEM, although it is always safe to use
kmap_local_page() / kunmap_local() also on those pages.
Link: https://lkml.kernel.org/r/20220728154844.10874-4-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In a recent thread about converting kmap() to kmap_local_page(), the
safety of calling kmap_local_page() was questioned.[1]
"any context" should probably be enough detail for users who want to know
whether or not kmap_local_page() can be called from interrupts. However,
Linux still has kmap_atomic() which might make users think they must use
the latter in interrupts.
Add "including interrupts" for better clarity.
[1] https://lore.kernel.org/lkml/3187836.aeNJFYEL58@opensuse/
Link: https://lkml.kernel.org/r/20220728154844.10874-3-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "highmem: Extend kmap_local_page() documentation", v2.
The Highmem interface is evolving and the current documentation does not
reflect the intended uses of each of the calls. Furthermore, after a
recent series of reworks, the differences of the calls can still be
confusing and may lead to the expanded use of calls which are deprecated.
This series is the second round of changes towards an enhanced
documentation of the Highmem's interface; at this stage the patches are
only focused to kmap_local_page().
In addition it also contains some minor clean ups.
This patch (of 7):
In the kdocs of kmap_local_page(), the description of @page starts after
several unnecessary spaces.
Therefore, remove those spaces.
Link: https://lkml.kernel.org/r/20220728154844.10874-1-fmdefrancesco@gmail.com
Link: https://lkml.kernel.org/r/20220728154844.10874-2-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now error handling code is prepared, so remove the blocking code and
enable memory error handling on 1GB hugepage.
Link: https://lkml.kernel.org/r/20220714042420.1847125-9-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently if memory_failure() (modified to remove blocking code with
subsequent patch) is called on a page in some 1GB hugepage, memory error
handling fails and the raw error page gets into leaked state. The impact
is small in production systems (just leaked single 4kB page), but this
limits the testability because unpoison doesn't work for it. We can no
longer create 1GB hugepage on the 1GB physical address range with such
leaked pages, that's not useful when testing on small systems.
When a hwpoison page in a 1GB hugepage is handled, it's caught by the
PageHWPoison check in free_pages_prepare() because the 1GB hugepage is
broken down into raw error pages before coming to this point:
if (unlikely(PageHWPoison(page)) && !order) {
...
return false;
}
Then, the page is not sent to buddy and the page refcount is left 0.
Originally this check is supposed to work when the error page is freed
from page_handle_poison() (that is called from soft-offline), but now we
are opening another path to call it, so the callers of
__page_handle_poison() need to handle the case by considering the return
value 0 as success. Then page refcount for hwpoison is properly
incremented so unpoison works.
Link: https://lkml.kernel.org/r/20220714042420.1847125-8-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__page_handle_poison() returns bool that shows whether
take_page_off_buddy() has passed or not now. But we will want to
distinguish another case of "dissolve has passed but taking off failed" by
its return value. So change the type of the return value. No functional
change.
Link: https://lkml.kernel.org/r/20220714042420.1847125-7-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If memory_failure() fails to grab page refcount on a hugetlb page because
it's busy, it returns without setting PG_hwpoison on it. This not only
loses a chance of error containment, but breaks the rule that
action_result() should be called only when memory_failure() do any of
handling work (even if that's just setting PG_hwpoison). This
inconsistency could harm code maintainability.
So set PG_hwpoison and call hugetlb_set_page_hwpoison() for such a case.
Link: https://lkml.kernel.org/r/20220714042420.1847125-6-naoya.horiguchi@linux.dev
Fixes: 405ce05123 ("mm/hwpoison: fix race between hugetlb free/demotion and memory_failure_hugetlb()")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Raw error info list needs to be removed when hwpoisoned hugetlb is
unpoisoned. And unpoison handler needs to know how many errors there are
in the target hugepage. So add them.
HPageVmemmapOptimized(hpage) and HPageRawHwpUnreliable(hpage)) sometimes
can't be unpoisoned, so skip them.
Link: https://lkml.kernel.org/r/20220714042420.1847125-5-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When handling memory error on a hugetlb page, the error handler tries to
dissolve and turn it into 4kB pages. If it's successfully dissolved,
PageHWPoison flag is moved to the raw error page, so that's all right.
However, dissolve sometimes fails, then the error page is left as
hwpoisoned hugepage. It's useful if we can retry to dissolve it to save
healthy pages, but that's not possible now because the information about
where the raw error pages is lost.
Use the private field of a few tail pages to keep that information. The
code path of shrinking hugepage pool uses this info to try delayed
dissolve. In order to remember multiple errors in a hugepage, a
singly-linked list originated from SUBPAGE_INDEX_HWPOISON-th tail page is
constructed. Only simple operations (adding an entry or clearing all) are
required and the list is assumed not to be very long, so this simple data
structure should be enough.
If we failed to save raw error info, the hwpoison hugepage has errors on
unknown subpage, then this new saving mechanism does not work any more, so
disable saving new raw error info and freeing hwpoison hugepages.
Link: https://lkml.kernel.org/r/20220714042420.1847125-4-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
follow_pud_mask() does not support non-present pud entry now. As long as
I tested on x86_64 server, follow_pud_mask() still simply returns
no_page_table() for non-present_pud_entry() due to pud_bad(), so no severe
user-visible effect should happen. But generally we should call
follow_huge_pud() for non-present pud entry for 1GB hugetlb page.
Update pud_huge() and follow_huge_pud() to handle non-present pud entries.
The changes are similar to previous works for pud entries commit
e66f17ff71 ("mm/hugetlb: take page table lock in follow_huge_pmd()") and
commit cbef8478be ("mm/hugetlb: pmd_huge() returns true for non-present
hugepage").
Link: https://lkml.kernel.org/r/20220714042420.1847125-3-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm, hwpoison: enable 1GB hugepage support", v7.
This patch (of 8):
I found a weird state of 1GB hugepage pool, caused by the following
procedure:
- run a process reserving all free 1GB hugepages,
- shrink free 1GB hugepage pool to zero (i.e. writing 0 to
/sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages), then
- kill the reserving process.
, then all the hugepages are free *and* surplus at the same time.
$ cat /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
3
$ cat /sys/kernel/mm/hugepages/hugepages-1048576kB/free_hugepages
3
$ cat /sys/kernel/mm/hugepages/hugepages-1048576kB/resv_hugepages
0
$ cat /sys/kernel/mm/hugepages/hugepages-1048576kB/surplus_hugepages
3
This state is resolved by reserving and allocating the pages then freeing
them again, so this seems not to result in serious problem. But it's a
little surprising (shrinking pool suddenly fails).
This behavior is caused by hstate_is_gigantic() check in
return_unused_surplus_pages(). This was introduced so long ago in 2008 by
commit aa888a7497 ("hugetlb: support larger than MAX_ORDER"), and at
that time the gigantic pages were not supposed to be allocated/freed at
run-time. Now kernel can support runtime allocation/free, so let's check
gigantic_page_runtime_supported() together.
Link: https://lkml.kernel.org/r/20220714042420.1847125-1-naoya.horiguchi@linux.dev
Link: https://lkml.kernel.org/r/20220714042420.1847125-2-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is already a macro PTRS_PER_PTE to represent the number of page
table entries, just use it.
Link: https://lkml.kernel.org/r/20220628092235.91270-9-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All the comments which explains how HVO works are moved to
vmemmap_dedup.rst since
commit 4917f55b4e ("mm/sparse-vmemmap: improve memory savings for compound devmaps")
except some comments above page_fixed_fake_head(). This commit moves
those comments to vmemmap_dedup.rst and improve vmemmap_dedup.rst as well.
Link: https://lkml.kernel.org/r/20220628092235.91270-8-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is a discussion about the name of hugetlb_vmemmap_alloc/free in
thread [1]. The suggestion suggested by David is rename "alloc/free" to
"optimize/restore" to make functionalities clearer to users, "optimize"
means the function will optimize vmemmap pages, while "restore" means
restoring its vmemmap pages discared before. This commit does this.
Another discussion is the confusion RESERVE_VMEMMAP_NR isn't used
explicitly for vmemmap_addr but implicitly for vmemmap_end in
hugetlb_vmemmap_alloc/free. David suggested we can compute what
hugetlb_vmemmap_init() does now at runtime. We do not need to worry for
the overhead of computing at runtime since the calculation is simple
enough and those functions are not in a hot path. This commit has the
following improvements:
1) The function suffixed name ("optimize/restore") is more expressive.
2) The logic becomes less weird in hugetlb_vmemmap_optimize/restore().
3) The hugetlb_vmemmap_init() does not need to be exported anymore.
4) A ->optimize_vmemmap_pages field in struct hstate is killed.
5) There is only one place where checks is_power_of_2(sizeof(struct
page)) instead of two places.
6) Add more comments for hugetlb_vmemmap_optimize/restore().
7) For external users, hugetlb_optimize_vmemmap_pages() is used for
detecting if the HugeTLB's vmemmap pages is optimizable originally.
In this commit, it is killed and we introduce a new helper
hugetlb_vmemmap_optimizable() to replace it. The name is more
expressive.
Link: https://lore.kernel.org/all/20220404074652.68024-2-songmuchun@bytedance.com/ [1]
Link: https://lkml.kernel.org/r/20220628092235.91270-7-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After the following commit:
78f39084b4 ("mm: hugetlb_vmemmap: add hugetlb_optimize_vmemmap sysctl")
There is no order requirement between the parameter of
"hugetlb_free_vmemmap" and "hugepages" since we have removed the check of
whether HVO is enabled from hugetlb_vmemmap_init(). Therefore we can
safely replace early_param() with core_param() to simplify the code.
Link: https://lkml.kernel.org/r/20220628092235.91270-6-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When I first introduced vmemmap manipulation functions related to HugeTLB,
I thought those functions may be reused by other modules (e.g. using
similar approach to optimize vmemmap pages, unfortunately, the DAX used
the same approach but does not use those functions). After two years, we
didn't see any other users. So move those functions to hugetlb_vmemmap.c.
Code movement without any functional change.
Link: https://lkml.kernel.org/r/20220628092235.91270-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Will Deacon <will@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It it inconvenient to mention the feature of optimizing vmemmap pages
associated with HugeTLB pages when communicating with others since there
is no specific or abbreviated name for it when it is first introduced.
Let us give it a name HVO (HugeTLB Vmemmap Optimization) from now.
This commit also updates the document about "hugetlb_free_vmemmap" by the
way discussed in thread [1].
Link: https://lore.kernel.org/all/21aae898-d54d-cc4b-a11f-1bb7fddcfffa@redhat.com/ [1]
Link: https://lkml.kernel.org/r/20220628092235.91270-4-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Will Deacon <will@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We hold an another reference to hugetlb_optimize_vmemmap_key when making
vmemmap_optimize_mode on, because we use static_key to tell memory_hotplug
that memory_hotplug.memmap_on_memory should be overridden. However, this
rule has gone when we have introduced PageVmemmapSelfHosted. Therefore,
we could simplify vmemmap_optimize_mode handling by not holding an another
reference to hugetlb_optimize_vmemmap_key. This also means that we not
incur the extra page_fixed_fake_head checks if there are no vmemmap
optinmized hugetlb pages after this change.
Link: https://lkml.kernel.org/r/20220628092235.91270-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Will Deacon <will@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Simplify hugetlb vmemmap and improve its readability", v2.
This series aims to simplify hugetlb vmemmap and improve its readability.
This patch (of 8):
The name hugetlb_optimize_vmemmap_enabled() a bit confusing as it tests
two conditions (enabled and pages in use). Instead of coming up to an
appropriate name, we could just delete it. There is already a discussion
about deleting it in thread [1].
There is only one user of hugetlb_optimize_vmemmap_enabled() outside of
hugetlb_vmemmap, that is flush_dcache_page() in arch/arm64/mm/flush.c.
However, it does not need to call hugetlb_optimize_vmemmap_enabled() in
flush_dcache_page() since HugeTLB pages are always fully mapped and only
head page will be set PG_dcache_clean meaning only head page's flag may
need to be cleared (see commit cf5a501d98). So it is easy to remove
hugetlb_optimize_vmemmap_enabled().
Link: https://lore.kernel.org/all/c77c61c8-8a5a-87e8-db89-d04d8aaab4cc@oracle.com/ [1]
Link: https://lkml.kernel.org/r/20220628092235.91270-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This fixes using wrong QoS settings when attempting to send frames while
acting as peripheral since the QoS settings in use are stored in
hconn->iso_qos not in sk->qos, this is actually properly handled on
getsockopt(BT_ISO_QOS) but not on iso_send_frame.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
syzbot is reporting attempt to cancel uninitialized work at
mgmt_index_removed() [1], for calling cancel_delayed_work_sync() without
INIT_DELAYED_WORK() is not permitted.
INIT_DELAYED_WORK() is called from mgmt_init_hdev() via chan->hdev_init()
from hci_mgmt_cmd(), but cancel_delayed_work_sync() is unconditionally
called from mgmt_index_removed().
Call cancel_delayed_work_sync() only if HCI_MGMT flag was set, for
mgmt_init_hdev() sets HCI_MGMT flag when calling INIT_DELAYED_WORK().
Link: https://syzkaller.appspot.com/bug?extid=b8ddd338a8838e581b1c [1]
Reported-by: syzbot <syzbot+b8ddd338a8838e581b1c@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 0ef08313ce ("Bluetooth: Convert delayed discov_off to hci_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_DEFER_SETUP shall be considered valid for all states except for
BT_CONNECTED as it is also used when initiated a connection rather then
only for BT_BOUND and BT_LISTEN.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following warning when building with make C=1:
net/bluetooth/mgmt.c:3821:29: warning: restricted __le16 degrades to integer
net/bluetooth/mgmt.c:4625:9: warning: cast to restricted __le32
Fixes: 600a87490f ("Bluetooth: Implementation of MGMT_OP_SET_BLOCKED_KEYS.")
Fixes: 4c54bf2b09 ("Bluetooth: Add get/set device flags mgmt op")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following warning when build with make C=1:
net/bluetooth/hci_event.c:337:15: warning: restricted __le16 degrades to integer
Fixes: a936612036 ("Bluetooth: Process result of HCI Delete Stored Link Key command")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The following memory corruption can happen since iso_pinfo.base size
did not account for its headers (4 bytes):
net/bluetooth/eir.c
76 memcpy(&eir[eir_len], data, data_len);
^^^^^^^ ^^^^^^^^
77 eir_len += data_len;
78
79 return eir_len;
80 }
The "eir" buffer has 252 bytes and data_len is 252 but we do a memcpy()
to &eir[4] so this can corrupt 4 bytes beyond the end of the buffer.
Fixes: f764a6c2c1 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
__hci_cmd_sync returns NULL if the controller responds with a status
event. This is unexpected for the commands sent here, but on
occurrence leads to null pointer dereferences and thus must be
handled.
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The C standard rules for when struct holes are zeroed out are slightly
weird. The existing assignments might initialize everything, but GCC
is allowed to (and does sometimes) leave the struct holes uninitialized,
so instead of using yet another variable and copy the QoS settings just
use a pointer to the stored QoS settings.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_ISO_QOS has different semantics when it comes to QoS PHY as it uses
0x00 to disable a direction but that value is invalid over HCI and
sockets using DEFER_SETUP to connect may attempt to use hci_bind_cis
multiple times in order to detect if the parameters have changed, so to
fix the code will now just mirror the PHY for the parameters of
HCI_OP_LE_SET_CIG_PARAMS and will not update the PHY of the socket
leaving it disabled.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Call release_sock(sk); before returning on this error path.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The patch d0be8347c623: "Bluetooth: L2CAP: Fix use-after-free caused
by l2cap_chan_put" from Jul 21, 2022, leads to the following Smatch
static checker warning:
net/bluetooth/l2cap_core.c:1977 l2cap_global_chan_by_psm()
error: we previously assumed 'c' could be null (see line 1996)
Fixes: d0be8347c6 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the commit f395e1d3b2
("rtc: spear: set range"), the value of
RTC_TIMESTAMP_END_9999 was incorrectly set to range_min.
390 config->rtc->range_min = RTC_TIMESTAMP_BEGIN_0000;
391 config->rtc->range_max = RTC_TIMESTAMP_END_9999;
Fixes: f395e1d3b2 ("rtc: spear: set range")
Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220728100101.1906801-1-zengjx95@gmail.com
This introduces support for the remoteproc on Mediatek MT8188, and
enables caches for MT8186 SCP. It adds support for PRU cores found on
the TI K3 AM62x SoCs.
It moves the recovery work after a firmware crash to an unbound
workqueue, to allow recovery to happen in parallel.
A new DMA API is introduced to release dma_mem for a device.
It adds support a panic handler for the Qualcomm modem remoteproc, with
the goal of having caches flushed in memory dumps for post-mortem
debugging and it introduces a mechanism to wait for the modem firmware
on SM8450 to decrypt part of its memory for post-mortem debugging.
Qualcomm sysmon is restricted to only inform remote processors about
peers that are actually running, to avoid a race where Linux tries to
notify a recovering remote processor about its peers new state. A
mechanism for waiting for the sysmon connection to be established is also
introduced, to avoid out-of-sync updates for rapidly restarting remote
processors.
A number of Devicetree binding cleanups and conversions to YAML are
introduced, to facilitate Devicetree validation. Lastly it introduces a
number of smaller fixes and cleanups in the core and a few different
drivers.
-----BEGIN PGP SIGNATURE-----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=gbAX
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"This introduces support for the remoteproc on Mediatek MT8188, and
enables caches for MT8186 SCP. It adds support for PRU cores found on
the TI K3 AM62x SoCs.
It moves the recovery work after a firmware crash to an unbound
workqueue, to allow recovery to happen in parallel.
A new DMA API is introduced to release dma_mem for a device.
It adds support a panic handler for the Qualcomm modem remoteproc,
with the goal of having caches flushed in memory dumps for post-mortem
debugging and it introduces a mechanism to wait for the modem firmware
on SM8450 to decrypt part of its memory for post-mortem debugging.
Qualcomm sysmon is restricted to only inform remote processors about
peers that are actually running, to avoid a race where Linux tries to
notify a recovering remote processor about its peers new state. A
mechanism for waiting for the sysmon connection to be established is
also introduced, to avoid out-of-sync updates for rapidly restarting
remote processors.
A number of Devicetree binding cleanups and conversions to YAML are
introduced, to facilitate Devicetree validation. Lastly it introduces
a number of smaller fixes and cleanups in the core and a few different
drivers"
* tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (42 commits)
remoteproc: qcom_q6v5_pas: Do not fail if regulators are not found
drivers/remoteproc: fix repeated words in comments
remoteproc: Directly use ida_alloc()/free()
remoteproc: Use unbounded workqueue for recovery work
remoteproc: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators
remoteproc: sysmon: Send sysmon state only for running rprocs
remoteproc: sysmon: Wait for SSCTL service to come up
remoteproc: qcom: q6v5: Set q6 state to offline on receiving wdog irq
remoteproc: qcom: pas: Check if coredump is enabled
remoteproc: qcom: pas: Mark devices as wakeup capable
remoteproc: qcom: pas: Mark va as io memory
remoteproc: qcom: pas: Add decrypt shutdown support for modem
remoteproc: qcom: q6v5-mss: add powerdomains to MSM8996 config
remoteproc: qcom_q6v5: Introduce panic handler for MSS
remoteproc: qcom_q6v5_mss: Update MBA log info
remoteproc: qcom: correct kerneldoc
remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use
remoteproc: qcom: using pm_runtime_resume_and_get to simplify the code
remoteproc: mediatek: Support MT8188 SCP
...
This contains fixes and cleanups in the rpmsg core, Qualcomm SMD and
GLINK drivers, a circular lock dependency in the Mediatek driver and the
a possible race condition in the rpmsg_char driver is resolved.
-----BEGIN PGP SIGNATURE-----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=xoKP
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This contains fixes and cleanups in the rpmsg core, Qualcomm SMD and
GLINK drivers, a circular lock dependency in the Mediatek driver and
a possible race condition in the rpmsg_char driver is resolved"
* tag 'rpmsg-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: convert sysfs snprintf to sysfs_emit
rpmsg: qcom_smd: Fix refcount leak in qcom_smd_parse_edge
rpmsg: qcom: correct kerneldoc
rpmsg: qcom: glink: remove unused name
rpmsg: qcom: glink: replace strncpy() with strscpy_pad()
rpmsg: Strcpy is not safe, use strscpy_pad() instead
rpmsg: Fix possible refcount leak in rpmsg_register_device_override()
rpmsg: Fix parameter naming for announce_create/destroy ops
rpmsg: mtk_rpmsg: Fix circular locking dependency
rpmsg: char: Add mutex protection for rpmsg_eptdev_open()
Al Viro
Fabio M. De Francesco
Naoya Horiguchi
Muchun Song
Luiz Augusto von Dentz
Tetsuo Handa
Soenke Huster
Dan Carpenter
Zeng Jingxiang
Linus Torvalds