* acpi-tables:
ACPI: Rename configfs.c to acpi_configfs.c to prevent link error
ACPI: add support for loading SSDTs via configfs
ACPI: add support for configfs
efi / ACPI: load SSTDs from EFI variables
spi / ACPI: add support for ACPI reconfigure notifications
i2c / ACPI: add support for ACPI reconfigure notifications
ACPI: add support for ACPI reconfiguration notifiers
ACPI / scan: fix enumeration (visited) flags for bus rescans
ACPI / documentation: add SSDT overlays documentation
ACPI: ARM64: support for ACPI_TABLE_UPGRADE
ACPI / tables: introduce ARCH_HAS_ACPI_TABLE_UPGRADE
ACPI / tables: move arch-specific symbol to asm/acpi.h
ACPI / tables: table upgrade: refactor function definitions
ACPI / tables: table upgrade: use cacheable map for tables
Conflicts:
arch/arm64/include/asm/acpi.h
When a latent (unknown to 'badblocks') error is encountered, it will
trigger a machine check exception. On a system with machine check
recovery, this will only SIGBUS the process(es) which had the bad page
mapped (as opposed to a kernel panic on platforms without machine
check recovery features). In the former case, we want to trigger a full
rescan of that nvdimm bus. This will allow any additional, new errors
to be captured in the block devices' badblocks lists, and offending
operations on them can be trapped early, avoiding machine checks.
This is done by registering a callback function with the
x86_mce_decoder_chain and calling the new ars_rescan functionality with
the address in the mce notificatiion.
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
With the arrival of x86-machine-check support the nfit driver will add a
(conditionally-compiled) source file. Prepare for this by moving all
nfit source to drivers/acpi/nfit/. This is pure code movement, no
functional changes.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Normally, an ARS (Address Range Scrub) only happens at
boot/initialization time. There can however arise situations where a
bus-wide rescan is needed - notably, in the case of discovering a latent
media error, we should do a full rescan to figure out what other sectors
are bad, and thus potentially avoid triggering an mce on them in the
future. Also provide a sysfs trigger to start a bus-wide scrub.
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull libnvdimm fix from Dan Williams:
"This contains a regression fix for a problem that was introduced in
v4.7-rc6.
In 4.7-rc1 we introduced auto-probing for the ACPI DSM (device-
specific-method) format that the platform firmware implements for
nvdimm devices. We initially fixed a regression in probing the QEMU
DSM implementation by making acpi_check_dsm() tolerant of the way QEMU
reports the "0 DSMs supported" condition.
However, that broke HPE platforms since that tolerance caused the
driver to mistakenly match the 1-zero-byte response those platforms
give to "unknown" commands. Instead, we simply make the driver
tolerant of not finding any supported DSMs. This has been tested to
work with both QEMU and HPE platforms.
This commit has appeared in a -next release with no reported issues"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit: make DIMM DSMs optional
While testing the new on-demand ARS patches we discovered that
differences between the nfit_test and normal nfit driver shutdown paths
can leak resources. Unify the shutdown paths to trigger via a devm_
callback when the acpi_desc->dev is unbound from its driver.
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Let the provider module be explicitly passed in rather than implicitly
assumed by the module that calls nvdimm_bus_register(). This is in
preparation for unifying the nfit and nfit_test driver teardown paths.
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that ACPI processor idle driver supports LPI(Low Power Idle), lets
enable ACPI_PROCESSOR_IDLE for ARM64 too.
This patch just removes the IA64 and X86 dependency on ACPI_PROCESSOR_IDLE
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI 6.0 introduced an optional object _LPI that provides an alternate
method to describe Low Power Idle states. It defines the local power
states for each node in a hierarchical processor topology. The OSPM can
use _LPI object to select a local power state for each level of processor
hierarchy in the system. They used to produce a composite power state
request that is presented to the platform by the OSPM.
Since multiple processors affect the idle state for any non-leaf hierarchy
node, coordination of idle state requests between the processors is
required. ACPI supports two different coordination schemes: Platform
coordinated and OS initiated.
This patch adds initial support for Platform coordination scheme of LPI.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI 6.0 adds a new method to specify the CPU idle states(C-states)
called Low Power Idle(LPI) states. Since new architectures like ARM64
use only LPIs, introduce ACPI_PROCESSOR_CSTATE to encapsulate all the
code supporting the old style C-states(_CST).
This patch will help to extend the processor_idle module to support
LPI.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pass the nfit buffer as a parameter rather than hanging it off of
acpi_desc.
Reviewed-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
acpi_evaluate_object() allocates memory. Free the buffer allocated
during acpi_nfit_add(). In order for this memory to be freed
acpi_nfit_init() needs to be converted to duplicate the nfit contents in
its internal allocation. Use zero-length arrays to minimize the thrash
with the rest of the nfit driver implementation.
All of the add_<nfit-sub-table>() routines now validate a minimum table
size and expect hotplugged tables to match the size of the original
table to count as a duplicate. For variable length tables, like 'idt'
and 'flush', we calculate the dynamic size. Note that hotplug by
definition cannot change the interleave as it would cause data
corruption of in-use namespaces.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Reported-by: Xiao Guangrong <guangrong.xiao@intel.com>
Reported-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This patch adds logic to treat virtual ramdisk SPA as pmem region, then
ramdisk's /dev/pmem* device can be mounted with iso9660.
It's useful to work with the httpboot in EFI firmware to pull a remote
ISO file to the local memory region for booting and installation.
Wiki page of UEFI HTTPBoot with OVMF:
https://en.opensuse.org/UEFI_HTTPBoot_with_OVMF
The ramdisk function in EDK2/OVMF generates a ACPI0012 root device that
it contains empty _STA but without _DSM:
DefinitionBlock ("ssdt2.aml", "SSDT", 2, "INTEL ", "RamDisk ", 0x00001000)
{
Scope (\_SB)
{
Device (NVDR)
{
Name (_HID, "ACPI0012") // _HID: Hardware ID
Name (_STR, Unicode ("NVDIMM Root Device")) // _STR: Description String
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
}
In section 5.2.25.2 of ACPI 6.1 spec, it mentions that the "SPA Range
Structure Index" of virtual SPA shall be set to zero. That means virtual SPA
will not be associated by any NVDIMM region mapping.
The VCD's SPA Range Structure in NFIT is similar to virtual disk region
as following:
[028h 0040 2] Subtable Type : 0000 [System Physical Address Range]
[02Ah 0042 2] Length : 0038
[02Ch 0044 2] Range Index : 0000
[02Eh 0046 2] Flags (decoded below) : 0000
Add/Online Operation Only : 0
Proximity Domain Valid : 0
[030h 0048 4] Reserved : 00000000
[034h 0052 4] Proximity Domain : 00000000
[038h 0056 16] Address Range GUID : 77AB535A-45FC-624B-5560-F7B281D1F96E
[048h 0072 8] Address Range Base : 00000000B6ABD018
[050h 0080 8] Address Range Length : 0000000005500000
[058h 0088 8] Memory Map Attribute : 0000000000000000
The way to not associate a SPA range is to never reference it from a "flush hint",
"interleave", or "control region" table.
After testing on OVMF, pmem driver can support the region that it doesn't
assoicate to any NVDIMM mapping. So, treat VCD like pmem is a idea to get
a pmem block device that it contains iso.
v4:
Instoduce nfit_spa_is_virtual() to check virtual ramdisk SPA and create
pmem region.
v3:
To simplify patch, removed useless VCD region in libnvdimm.
v2:
Removed the code for setting VCD to a read-only region.
Cc: Gary Lin <GLin@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Linda Knippers <linda.knippers@hpe.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Since DPTF has its own folder under ACPI, move this file also there.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This driver adds support for Dynamic Platform and Thermal Framework
(DPTF) Platform Power Participant device (INT3407) support.
This participant is responsible for exposing platform telemetry such as:
max_platform_power
platform_power_source
adapter_rating
battery_steady_power
charger_type
These attributes are presented via sysfs interface under the INT3407
platform device:
$ls /sys/bus/platform/devices/INT3407\:00/dptf_power/
adapter_rating_mw
battery_steady_power_mw
charger_type
max_platform_power_mw
platform_power_source
`
ACPI methods description used in this driver:
PMAX: Maximum platform power that can be supported by the battery in
mW.
PSRC: System charge source,
0x00 = DC
0x01 = AC
0x02 = USB
0x03 = Wireless Charger
ARTG: Adapter rating in mW (Maximum Adapter power) Must be 0 if no
AC adapter is plugged in.
CTYP: Charger Type,
Traditional : 0x01
Hybrid: 0x02
NVDC: 0x03
PBSS: Returns max sustained power for battery in milliWatts.
The INT3407 also contains _BTS and _BIX objects, which are compliant to
ACPI 5.0, specification. Those objects are already used by ACPI battery
(PNP0C0A) driver and information about them is exported via Linux power
supply class registration.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 4995734e97 "acpi, nfit: fix acpi_check_dsm() vs zero functions
implemented" attempted to fix a QEMU regression by supporting its usage
of a zero-mask as a valid response to a DSM-family probe request.
However, this behavior breaks HP platforms that return a zero-mask by
default causing the probe to misidentify the DSM-family.
Instead, the QEMU regression can be fixed by simply not requiring the DSM
family to be identified.
This effectively reverts commit 4995734e97, and removes the DSM
requirement from the init path.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Linda Knippers <linda.knippers@hpe.com>
Fixes: 4995734e97 ("acpi, nfit: fix acpi_check_dsm() vs zero functions implemented")
Reported-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Tested-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The Makefile for building this is "acpi-y" and so it is not built
as a module. Hence including module.h and everything that comes
with it just for the no-op MODULE_LICENSE is rather heavy handed.
The license info is found at the top of the file, so we just remove
the MODULE_LICENSE and the include of module.h
We add an include of export.h since the file exports some symbols.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Kconfig for this file is:
drivers/acpi/Kconfig:config ACPI_DOCK
drivers/acpi/Kconfig: bool "Dock"
...and so it is not built as a module. Hence including module.h
and everything that comes with it just for the no-op MODULE_LICENSE
and friends is rather heavy handed.
The license/author info is found at the top of the file, so we
just remove the MODULE_LICENSE etc and the include of module.h
The file does still have some module_param() so we add the right
include for that infrastructure.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Kconfig for this file is:
drivers/acpi/Kconfig:config ACPI_PCI_SLOT
drivers/acpi/Kconfig: bool "PCI slot detection driver"
...and so it is not built as a module. Hence including module.h
and everything that comes with it just for the no-op MODULE_LICENSE
and friends is rather heavy handed.
The license/author info is found at the top of the file, so we
just remove the MODULE_LICENSE etc and the include of module.h
We delete the DRIVER_VERSION macro as well since it is unused.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Kconfig currently controlling compilation of these files are:
drivers/acpi/Kconfig:menuconfig PMIC_OPREGION
drivers/acpi/Kconfig: bool "PMIC (Power Management Integrated Circuit) operation region support"
drivers/acpi/Kconfig:config BXT_WC_PMIC_OPREGION
drivers/acpi/Kconfig: bool "ACPI operation region support for BXT WhiskeyCove PMIC"
drivers/acpi/Kconfig:config XPOWER_PMIC_OPREGION
drivers/acpi/Kconfig: bool "ACPI operation region support for XPower AXP288 PMIC"
...meaning they currently are not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the code there is no doubt it is builtin-only.
We delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
One file was using module_init. Since module_init translates to
device_initcall in the non-modular case, the init ordering remains
unchanged with this commit.
In one case we replace the module.h with export.h since that file
is exporting some symbols, but does not use __init. The other two
are using __init and so module.h gets replaced with init.h there.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As part of the hotplug cleanup, the CPU_STARTING/DYING actions are going
away soon. This driver needlessly uses those two macro, and so this patch
replaces that code with something more sensible.
Commit:
8da8373447 ("ACPI / processor: Fix STARTING/DYING action in acpi_cpu_soft_notify()")
added checks for those two actions, because the notification callback can
sleep, causing a hung CPU. This patch instead checks for the ONLINE/DEAD
actions, which are the ones that are handled by the driver in the first
place.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-acpi@vger.kernel.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153335.964962885@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The __pmem address space was meant to annotate codepaths that touch
persistent memory and need to coordinate a call to wmb_pmem(). Now that
wmb_pmem() is gone, there is little need to keep this annotation.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
nvdimm_flush() is a replacement for the x86 'pcommit' instruction. It is
an optional write flushing mechanism that an nvdimm bus can provide for
the pmem driver to consume. In the case of the NFIT nvdimm-bus-provider
nvdimm_flush() is implemented as a series of flush-hint-address [1]
writes to each dimm in the interleave set (region) that backs the
namespace.
The nvdimm_has_flush() routine relies on platform firmware to describe
the flushing capabilities of a platform. It uses the heuristic of
whether an nvdimm bus provider provides flush address data to return a
ternary result:
1: flush addresses defined
0: dimm topology described without flush addresses (assume ADR)
-errno: no topology information, unable to determine flush mechanism
The pmem driver is expected to take the following actions on this ternary
result:
1: nvdimm_flush() in response to REQ_FUA / REQ_FLUSH and shutdown
0: do not set, WC or FUA on the queue, take no further action
-errno: warn and then operate as if nvdimm_has_flush() returned '0'
The caveat of this heuristic is that it can not distinguish the "dimm
does not have flush address" case from the "platform firmware is broken
and failed to describe a flush address". Given we are already
explicitly trusting the NFIT there's not much more we can do beyond
blacklisting broken firmwares if they are ever encountered.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for triggering flushes of a DIMM's writes-posted-queue
(WPQ) via the pmem driver move mapping of flush hint addresses to the
region driver. Since this uses devm_nvdimm_memremap() the flush
addresses will remain mapped while any region to which the dimm belongs
is active.
We need to communicate more information to the nvdimm core to facilitate
this mapping, namely each dimm object now carries an array of flush hint
address resources.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that all shared mappings are handled by devm_nvdimm_memremap() we no
longer need nfit_spa_map() nor do we need to trigger a callback to the
bus provider at region disable time.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Revert commit 2f38b1b16d (ACPICA: Namespace: Fix deadlock triggered by
MLC support in dynamic table loading) that attempted to fix a deadlock
issue introduced by a previous commit, but it led to a lock ordering
inconsistency that caused further problems to appear.
Fixes: 2f38b1b16d (ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If we compile ACPI configfs.c as module it will confuse the linker as it
hides symbols from the actual configfs:
Kernel: arch/x86/boot/bzImage is ready (#1236)
MODPOST 5739 modules
ERROR: "configfs_unregister_subsystem" [samples/configfs/configfs_sample.ko] undefined!
ERROR: "configfs_register_subsystem" [samples/configfs/configfs_sample.ko] undefined!
ERROR: "config_group_init" [samples/configfs/configfs_sample.ko] undefined!
ERROR: "config_item_init_type_name" [samples/configfs/configfs_sample.ko] undefined!
ERROR: "config_group_init_type_name" [samples/configfs/configfs_sample.ko] undefined!
ERROR: "configfs_undepend_item" [fs/ocfs2/cluster/ocfs2_nodemanager.ko] undefined!
...
Prevent these by renaming the file to acpi_configfs.c instead.
Reported-by: Scott Lawson <scott.lawson@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
New tables can be loaded by creating directories under /config/table/
and writing the AML code into the aml table attribute. Various table
attributes will be readable once the table is successfully loaded.
Unloading tables is not supported at the moment, but it can be easily
implemented once ACPI loading functions provide a table handle to be
used for unloading.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Register the ACPI subsystem with configfs.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for ACPI reconfiguration notifiers to allow subsystems
to react to changes in the ACPI tables that happen after the initial
enumeration. This is similar with the way dynamic device tree
notifications work.
The reconfigure notifications supported for now are device add and
device remove.
Since ACPICA allows only one table notification handler, this patch
makes the table notifier function generic and moves it out of the
sysfs specific code.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the ACPI tables change as a result of a dinamically loaded table
and a bus rescan is required the enumeration/visited flag are not
consistent.
I2C/SPI are not directly enumerated in acpi_bus_attach(), however
the visited flag is set. This makes it impossible to check if an
ACPI device has already been enumerated by the I2C and SPI
subsystems. To fix this issue we only set the visited flags if
the device is not I2C or SPI.
With this change we also need to remove setting visited to false
from acpi_bus_attach(), otherwise if we rescan already enumerated
I2C/SPI devices we try to re-enumerate them.
Note that I2C/SPI devices can be enumerated either via a scan handler
(when using PRP0001) or via regular device_attach(). In either case
the flow goes through acpi_default_enumeration() which makes it the
ideal place to mark the ACPI device as enumerated.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is an order issue in ec_remove_handlers() that acpi_ec_stop()
is called before removing the operation region handler. That is
incorrect, because the operation region handler removal triggers
_REG(DISCONNECT) which may result in new EC transactions to carry
out.
That existing issue has been triggered by the following commit:
Commit: dcf15cbded
Subject: ACPI / EC: Fix a boot EC regresion by restoring boot EC
which changed the driver to call ec_remove_handlers() after invoking
_REG(CONNECT), so the issue has become visible.
Fixes: dcf15cbded (ACPI / EC: Fix a boot EC regresion by restoring boot EC)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=102421
Reported-and-tested-by: Wolfram Sang <wsa@the-dreams.de>
Reported-by: Nicholas <nkudriavtsev@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In preparation for generically mapping flush hint addresses for both the
BLK and PMEM use case, provide a generic / reference counted mapping
api. Given the fact that a dimm may belong to multiple regions (PMEM
and BLK), the flush hint addresses need to be held valid as long as any
region associated with the dimm is active. This is similar to the
existing BLK-region case where multiple BLK-regions may share an
aperture mapping. Up-level this shared / reference-counted mapping
capability from the nfit driver to a core nvdimm capability.
This eliminates the need for the nd_blk_region.disable() callback. Note
that the removal of nfit_spa_map() and related infrastructure is
deferred to a later patch.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Before enabling use of flush hints for pmem regions, we need to make
sure they are always associated. Move the initialization of nfit_flush
out of the block-window specific init path to the general init path.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If devm_add_action() fails, we are explicitly calling the cleanup to free
the resources allocated. Lets use the helper devm_add_action_or_reset()
and return directly in case of error, since the cleanup function
has been already called by the helper if there was any error.
Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This patch adds support for platform initited graceful shutdown as
described in sections 5.6.6(Table-143) and 6.3.5.1 of ACPI 6.1 spec
The OSPM will get a graceful shutdown request via a Notify operator
on \_SB device with a value of 0x81 per section 5.6.6. Following the
shutdown request from platform the OSPM needs to follow the
processing sequence as described in section 6.2.5.1.
v3
* Switched to regular work with delays from delayed work
* Dropped changes to actypes.h
* Small style changes
v2
* Switched from standalone driver to a simple notify handler
v1
* Initial
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI 6.0 introduces a new table STAO to list the devices which are used
by Xen and can't be used by Dom0. On Xen virtual platforms, the physical
UART is used by Xen. So here it hides UART from Dom0.
CC: "Rafael J. Wysocki" <rjw@rjwysocki.net> (supporter:ACPI)
CC: Len Brown <lenb@kernel.org> (supporter:ACPI)
CC: linux-acpi@vger.kernel.org (open list:ACPI)
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In acpi_subsystem_init(), function acpi_enable_subsystem() is
called to do the real job. However with different flags passed to
acpi_enable_subsystem(), different code is executed.
In acpi_subsystem_init(), with "~ACPI_NO_ACPI_ENABLE" passed in, it
will only switch over the platform to the ACPI mode. The remaining
part of acpi_enable_subsystem() is done when acpi_bus_init() is
called.
So the comments above acpi_subsystem_init() is not exact, change it
here.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The FIFO unlocking mechanism in acpi_dbg has been broken by the
following commit:
Commit: 287980e49f
Subject: remove lots of IS_ERR_VALUE abuses
It converted !IS_ERR_VALUE(ret) into !ret which was not entirely
correct. Fix the regression by taking ret > 0 into account too as
appropriate.
Fixes: 287980e49f (remove lots of IS_ERR_VALUE abuses)
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Simplifications, changelog & subject massage ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a lock order issue in acpi_load_tables(). The namespace lock
is held before holding the interpreter lock.
With ACPI_MUTEX_DEBUG enabled in the kernel, this is printed to the
log during boot:
[ 0.885699] ACPI Error: Invalid acquire order: Thread 405884224 owns [ACPI_MTX_Namespace], wants [ACPI_MTX_Interpreter] (20160422/utmutex-263)
[ 0.885881] ACPI Error: Could not acquire AML Interpreter mutex (20160422/exutils-95)
[ 0.893846] ACPI Error: Mutex [0x0] is not acquired, cannot release (20160422/utmutex-326)
[ 0.894019] ACPI Error: Could not release AML Interpreter mutex (20160422/exutils-133)
The issue has been introduced by the following commit:
Commit: 2f38b1b16d
ACPICA Commit: bfe03ffcde8ed56a7eae38ea0b188aeb12f9c52e
Subject: ACPICA: Namespace: Fix a regression that MLC support triggers
dead lock in dynamic table loading
Which fixed a deadlock issue for acpi_ns_load_table() in
acpi_ex_add_table() but didn't take care of the lock order in
acpi_ns_load_table() correctly.
Originally (before the above commit), ACPICA used the
namespace/interpreter locks in the following 2 key code
paths:
1. Table loading:
acpi_ns_load_table
L(Namespace)
acpi_ns_parse_table
acpi_ns_one_complete_parse
U(Namespace)
2. Object evaluation:
acpi_ns_evaluate
L(Interpreter)
acpi_ps_execute_method
U(Interpreter)
acpi_ns_load_table
L(Namespace)
U(Namespace)
acpi_ev_initialize_region
L(Namespace)
U(Namespace)
address_space.setup
L(Namespace)
U(Namespace)
address_space.handler
L(Namespace)
U(Namespace)
acpi_os_wait_semaphore
acpi_os_acquire_mutex
acpi_os_sleep
L(Interpreter)
U(Interpreter)
During runtime, while acpi_ns_evaluate is called, the lock order is
always Interpreter -> Namespace.
In turn, the problematic commit acquires the locks in the following
order:
3. Table loading:
acpi_ns_load_table
L(Namespace)
acpi_ns_parse_table
L(Interpreter)
acpi_ns_one_complete_parse
U(Interpreter)
U(Namespace)
To fix the lock order issue, move the interpreter lock to
acpi_ns_load_table() to ensure the lock order correctness:
4. Table loading:
acpi_ns_load_table
L(Interpreter)
L(Namespace)
acpi_ns_parse_table
acpi_ns_one_complete_parse
U(Namespace)
U(Interpreter)
However, this doesn't fix the current design issues related to the
namespace lock. For example, we can notice that in acpi_ns_evaluate(),
outside of acpi_ns_load_table(), the namespace objects may be created
by the named object creation control methods. And the creation of
the method-owned namespace objects are not locked by the namespace
lock. This patch doesn't try to fix such kind of existing issues.
Fixes: 2f38b1b16d (ACPICA: Namespace: Fix a regression that MLC support triggers dead lock in dynamic table loading)
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Our Windows probe result shows that EC._REG is evaluated after evaluating
all _INI/_STA control methods.
With boot EC always switched in acpi_ec_dsdt_probe(), we can see that as
long as there is no EC opregion accesses in the MLC (module level code, AML
code out of any control methods) and in _INI/_STA, there is no need to make
sure that ECDT must be correct.
Bugs of 9399/12461 were reported against an order issue that BAT0/1._STA
evaluations contain EC accesses while the ECDT setting is wrong.
>From the acpidump output posted on bug 9399, we can see that it is actually
a different issue. In this table, if EC._REG is not executed, EC accesses
will be done in a platform specific manner. As we've already ensured not to
execute EC._REG during the eary stage, we can remove the quirks for bug
9399.
From the acpidump output posted on bug 12461, we can see that it still
needs the quirk. In this table, EC._REG flags a named object whose default
value is One, thus BAT1._STA surely should invoke EC accesses whatever we
invoke EC._REG or not. We have to keep the quirk for it before we can root
cause the issue.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Failure handling of the boot EC code is not tidy. This patch cleans
them up with acpi_ec_alloc().
This patch also changes acpi_ec_dsdt_probe(), always switches the
boot EC from the ECDT one to the DSDT one in this function.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 103544d869 (ACPI,PCI,IRQ: reduce resource requirements)
the penalty values are calculated on the fly rather than at boot time.
This works fine for PCI interrupts but not so well for ISA interrupts.
The information on whether or not an ISA interrupt is in use is not
available to the pci_link.c code directly. That information is
obtained from the outside via acpi_penalize_isa_irq(). [If its
"active" argument is true, then the IRQ is in use by ISA.]
Since the current code relies on PCI Link objects for determination
of penalties, we are factoring in the PCI penalty twice after
acpi_penalize_isa_irq() function is called.
To avoid that, limit the newly added functionality to just PCI
interrupts so that old behavior is still maintained.
Fixes: 103544d869 (ACPI,PCI,IRQ: reduce resource requirements)
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Tested-by: Wim Osterholt <wim@djo.tudelft.nl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Trying to make the ISA and PCI init functionality common turned out
to be a bad idea, because the ISA path depends on external
functionality.
Restore the previous behavior and limit the refactoring to PCI
interrupts only.
Fixes: 1fcb6a813c "ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init()"
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Tested-by: Wim Osterholt <wim@djo.tudelft.nl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The change introduced in commit 103544d869 (ACPI,PCI,IRQ: reduce
resource requirements) omitted the initially applied PCI_POSSIBLE
penalty when the IRQ is active.
Incorrect calculation of the penalty leads the ACPI code to assigning
a wrong interrupt number to a PCI INTx interrupt.
This would not be as bad as it sounds in theory. It would just cause
the interrupts to be shared and result in performance penalty.
However, some drivers (like the parallel port driver) don't like
interrupt sharing and in the above case they will causes all of
the PCI drivers wanting to share the interrupt to be unable to
request it.
The issue has not been caught in testing because the behavior is
platform-specific and depends on the peripherals ending up sharing
the IRQ and their drivers.
Before the above commit the code would add the PCI_POSSIBLE value
divided by the number of possible IRQ users to the IRQ penalty
during initialization.
Later in that code path, if the IRQ is chosen as the active IRQ or
if it is used by ISA; additional penalties are added.
Fixes: 103544d869 (ACPI,PCI,IRQ: reduce resource requirements)
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Tested-by: Wim Osterholt <wim@djo.tudelft.nl>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix an expression in the ACPI PCI IRQ management code added by a
recent commit that overlooked missing parens in it, so the result
of the computation is incorrect in some cases (Sinan Kaya).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=r8BR
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix an expression in the ACPI PCI IRQ management code added by a
recent commit that overlooked missing parens in it, so the result of
the computation is incorrect in some cases (Sinan Kaya)"
* tag 'acpi-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI,PCI,IRQ: correct operator precedence
Pull libnvdimm fixes from Dan Williams:
"1/ Two regression fixes since v4.6: one for the byte order of a sysfs
attribute (bz121161) and another for QEMU 2.6's NVDIMM _DSM (ACPI
Device Specific Method) implementation that gets tripped up by new
auto-probing behavior in the NFIT driver.
2/ A fix tagged for -stable that stops the kernel from
clobbering/ignoring changes to the configuration of a 'pfn'
instance ("struct page" driver). For example changing the
alignment from 2M to 1G may silently revert to 2M if that value is
currently stored on media.
3/ A fix from Eric for an xfstests failure in dax. It is not
currently tagged for -stable since it requires an 8-exabyte file
system to trigger, and there appear to be no user visible side
effects"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit: fix format interface code byte order
dax: fix offset overflow in dax_io
acpi, nfit: fix acpi_check_dsm() vs zero functions implemented
libnvdimm, pfn, dax: fix initialization vs autodetect for mode + alignment
The omitted parenthesis prevents the addition operation when
acpi_penalize_isa_irq function is called.
Fixes: 103544d869 (ACPI,PCI,IRQ: reduce resource requirements)
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The _PTS control method is defined in the section 7.4.1 of acpi 6.0
spec. The _PTS control method is executed by the OS during the sleep
transition process for S1, S2, S3, S4, and for orderly S5 shutdown.
The _PTS control method provides the BIOS a mechanism for performing
some housekeeping, such as writing the sleep type value to the embedded
controller, before entering the system sleeping state. Note that some
Lenovo Server BIOS use this mechanism to detect reboot event and
prompt user by popped dialog box.
According to section 7.5 of acpi 6.0 spec, _PTS should run after _TTS.
Add a _PTS evaulation to the existing _TTS reboot notifier and change
the notifier name to reflect the fact that it's not for _TTS only any
more.
Signed-off-by: Ocean He <hehy1@lenovo.com>
Signed-off-by: Nagananda Chumbalkar <nchumbalkar@lenovo.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI/APEI is designed to verifiy/report H/W errors, like Corrected
Error(CE) and Uncorrected Error(UC). It contains four tables: HEST,
ERST, EINJ and BERT. The first three tables have been merged for
a long time, but because of lacking BIOS support for BERT, the
support for BERT is pending until now. Recently on ARM 64 platform
it is has been supported. So here we come.
Under normal circumstances, when a hardware error occurs, kernel will
be notified via NMI, MCE or some other method, then kernel will
process the error condition, report it, and recover it if possible.
But sometime, the situation is so bad, so that firmware may choose to
reset directly without notifying Linux kernel.
Linux kernel can use the Boot Error Record Table (BERT) to get the
un-notified hardware errors that occurred in a previous boot. In this
patch, the error information is reported via printk.
For more information about BERT, please refer to ACPI Specification
version 6.0, section 18.3.1:
http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf
The following log is a BERT record after system reboot because of hitting
a fatal memory error:
BERT: Error records from previous boot:
[Hardware Error]: It has been corrected by h/w and requires no further action
[Hardware Error]: event severity: corrected
[Hardware Error]: Error 0, type: recoverable
[Hardware Error]: section_type: memory error
[Hardware Error]: error_status: 0x0000000000000400
[Hardware Error]: physical_address: 0xffffffffffffffff
[Hardware Error]: card: 1 module: 2 bank: 3 row: 1 column: 2 bit_position: 5
[Hardware Error]: error_type: 2, single-bit ECC
[Tomasz Nowicki: Clear error status at the end of error handling]
[Tony: Applied some cleanups suggested by Fu Wei]
[Fu Wei: delete EXPORT_SYMBOL_GPL(bert_disable), improve the code]
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Tested-by: Jonathan (Zhixiong) Zhang <zjzhang@codeaurora.org>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Per JEDEC Annex L Release 3 the SPD data is:
Bits 9~5 00 000 = Function Undefined
00 001 = Byte addressable energy backed
00 010 = Block addressed
00 011 = Byte addressable, no energy backed
All other codes reserved
Bits 4~0 0 0000 = Proprietary interface
0 0001 = Standard interface 1
All other codes reserved; see Definitions of Functions
...and per the ACPI 6.1 spec:
byte0: Bits 4~0 (0 or 1)
byte1: Bits 9~5 (1, 2, or 3)
...so a format interface code displayed as 0x301 should be stored in the
nfit as (0x1, 0x3), little-endian.
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Robert Elliott <elliott@hpe.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=121161
Fixes: 30ec5fd464 ("nfit: fix format interface code byte order per ACPI6.1")
Fixes: 5ad9a7fde0 ("acpi/nfit: Update nfit driver to comply with ACPI 6.1")
Reported-by: Kristin Jacque <kristin.jacque@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Fixes compiler warning.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
At least some of the Broxtons have a third custom OpRegion
named REGS. This adds handling for it.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When CPPC fails to request a PCC channel, the CPC data is freed
and cpc_desc_ptr points to the invalid data.
Avoid this issue by moving the cpc_desc_ptr assignment after the PCC
channel request.
Signed-off-by: Hoan Tran <hotran@apm.com>
Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
QEMU 2.6 implements nascent support for nvdimm DSMs. Depending on
configuration it may only implement the function0 dsm to indicate that
no other DSMs are available. Commit 31eca76ba2 "nfit, libnvdimm:
limited/whitelisted dimm command marshaling mechanism" breaks QEMU, but
QEMU is spec compliant. Per the spec the way to indicate that no
functions are supported is:
If Function Index is zero, the return is a buffer containing one bit
for each function index, starting with zero. Bit 0 indicates whether
there is support for any functions other than function 0 for the
specified UUID and Revision ID. If set to zero, no functions are
supported (other than function zero) for the specified UUID and
Revision ID.
Update the nfit driver to determine the family (interface UUID) without
requiring the implementation to define any other functions, i.e.
short-circuit acpi_check_dsm() to succeed per the spec. The nfit driver
appears to be the only user passing funcs==0 to acpi_check_dsm(), so
this behavior change of the common routine should be limited to the
probing done by the nfit driver.
Cc: Len Brown <lenb@kernel.org>
Cc: Jerry Hoemann <jerry.hoemann@hpe.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Fixes: 31eca76ba2 ("nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism")
Reported-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Tested-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This patch adds operation region driver for Intel BXT WhiskeyCove
PMIC. The register mapping is done as per the BXT WC data sheet.
Signed-off-by: Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com>
Signed-off-by: Bin Gao <bin.gao@intel.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Issue description: On some pmics, the policy enable for thermal alerts
refers to different bit fields of the same registers, whereas on other
pmics, the policy enable refers to the same bit field on different
registers. Previous implementation did not provide the flexibility for
supporting the first approach.
Solution: Modified the policy enable function to take bit field as well.
The use of bit field is left to the pmic specific opregion driver.
Signed-off-by: Yegnesh Iyer <yegnesh.s.iyer@intel.com>
Signed-off-by: Bin Gao <bin.gao@intel.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is absolutely unfriendly when one sees this:
# modprobe einj
modprobe: ERROR: could not insert 'einj': No such device
without anything in dmesg to tell one why the load failed.
Beef up the error handling of the init function to be more user-friendly
when the load fails.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Based on 8.4.7.1 section of ACPI 6.1 specification, if the platform
supports CPPC, the _CPC object must exist under all processor objects.
If cpc_desc_ptr pointer is invalid on any CPUs, acpi_get_psd_map()
should return error and CPPC cpufreq driver can not be registered.
Signed-off-by: Hoan Tran <hotran@apm.com>
Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_print_osc_error() basically duplicates the functionalit of
acpi_handle_debug(), so use that one in there.
While at it, convert the explicit KERN_DEBUG prints to pr_debug()
(and apply it to continuation messages too).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
alloc_workqueue replaces deprecated create_workqueue().
A dedicated workqueue has been used since the workqueue
acpi_thermal_pm_queue with workitem &tz->thermal_check_work
(maps to acpi_thermal_check_fn), is involved in thermal zone polling.
Wallclock time is actually important and getting delayed in handling
critical temperature event can actually lead to unnecessary hardware
damage. So while this is not used during memory reclaim, we still want
forward progress guarantee and be generally snappy in servicing it.
Hence, WQ_MEM_RECLAIM and WQ_HIGHPRI have been used here.
Since there are only a fixed number of work items, explicit concurrency
limit is unnecessary here.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linux userspace (systemd-logind) keeps on rechecking lid state when the
lid state is closed. If it failed to update the lid state to open after
boot/resume, the system suspending right after the boot/resume could be
resulted.
Graphics drivers also use the lid notifications to implment
MODESET_ON_LID_OPEN option.
Before the situation is improved from the userspace and from the graphics
driver, users can simply configure ACPI button driver to send initial
"open" lid state using button.lid_init_state=open to avoid such kind of
issues.
And our ultimate target should be making button.lid_init_state=ignore
the default behavior. This patch implements the 2 options and keep the
old behavior (button.lid_init_state=method).
Link: https://lkml.org/2016/3/7/460
Link: https://github.com/systemd/systemd/issues/2087
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(Correct a wrong macro usage.)
This patch simplies the code by merging some redundant code.
No functional changes.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The _LID control method's initial returning value is not reliable.
The _LID control method is described to return the "current" lid state.
However the word of "current" has ambiguity, many BIOSen return the lid
state upon the last lid notification instead of returning the lid state
upon the last _LID evaluation. There won't be difference when the _LID
control method is evaluated during the runtime, the problem is its initial
returning value. When the BIOSen implement this control method with cached
value, the initial returning value is likely not reliable. There are simply
so many examples retuning "close" as initial lid state (Link 1), sending
this state to the userspace causes suspending right after booting/resuming.
Since the lid state is implemented by the BIOSen, the kernel lid driver has
no idea how it can be correct, this patch stops sending the initial lid
state to the userspace to try to avoid sending the wrong lid state to the
userspace to trigger such kind of wrong suspending. This actually reverts
the following commit introduced for fixing a Novell bug:
Commit: 23de5d9ef2
Subject: ACPI: button: send initial lid state after add and resume
Link: https://bugzilla.kernel.org/show_bug.cgi?id=89211
Link: https://bugzilla.kernel.org/show_bug.cgi?id=106151
Link: https://bugzilla.kernel.org/show_bug.cgi?id=106941
Link: https://bugzilla.novell.com/show_bug.cgi?id=326814
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Remove the dbg macro and debug module parameter and use
the generic kernel facility.
Trivially reduces defconfig object size on x86-64
$ size drivers/acpi/pci_slot.o*
text data bss dec hex filename
880 752 4 1636 664 drivers/acpi/pci_slot.o.new
935 752 5 1692 69c drivers/acpi/pci_slot.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use generic pr_<level> functions with pr_fmt for info and err.
This also reduces object size a trivial bit:
$ size drivers/acpi/pci_slot.o*
text data bss dec hex filename
935 752 5 1692 69c drivers/acpi/pci_slot.o.new
1027 752 5 1784 6f8 drivers/acpi/pci_slot.o.old
Miscellanea:
o Remove unnecessary OOM message as k.alloc functions get a generic
stack dump on OOM
o Remove unnecessary embedded prefix from a dbg() message
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some system supports hybrid graphics and its discrete VGA
does not have any connectors and therefore has no _DOD method.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add function needed for cpu to node mapping, and enable ACPI based
NUMA for ARM64 in Kconfig
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Robert Richter <rrichter@cavium.com>
[david.daney@cavium.com added ACPI_NUMA default to y for ARM64]
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We want to use the table upgrade feature in ARM64.
Introduce a new configuration option that allows that.
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The constant that defines max phys address where the new upgraded
ACPI table should be allocated is arch-specific. Move it to
<asm/acpi.h>
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Refer initrd_start, initrd_end directly from drivers/acpi/tables.c.
This allows to use the table upgrade feature in architectures
other than x86. Also this simplifies header files.
The patch renames acpi_table_initrd_init() to acpi_table_upgrade()
(what reflects the purpose of the function) and removes the unneeded
wraps early_acpi_table_init() and early_initrd_acpi_init().
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Acked-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The new memory allocated in acpi_table_initrd_init() is used to
copy the upgraded tables to it. So it should be mapped with
early_memunmap() instead of early_ioremap().
This is critical for ARM.
Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Acked-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The new module-level code (MLC) approach invokes MLC on the per-table
basis, but the dynamic loading support of this is incorrect because
of the lock order:
acpi_ns_evaluate
acpi_ex_enter_intperter
acpi_ns_load_table (triggered by Load opcode)
acpi_ns_exec_module_code_list
acpi_ex_enter_intperter
The regression is introduced by the following commit:
Commit: 2785ce8d0d
ACPICA Commit: 071eff738c59eda1792ac24b3b688b61691d7e7c
Subject: ACPICA: Add per-table execution of module-level code
This patch fixes this regression by unlocking the interpreter lock
before invoking MLC. However, the unlocking is done to the
acpi_ns_load_table(), in which the interpreter lock should be locked
by acpi_ns_parse_table() but it wasn't.
Fixes: 2785ce8d0d (ACPICA: Add per-table execution of module-level code)
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 4.5+ <stable@vger.kernel.org> # 4.5+
[ rjw : Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add the Microsoft _DSM command set to the white list of NVDIMM command
sets.
This command set is documented at:
https://msdn.microsoft.com/library/windows/hardware/mt604741
Cc: Pavel Machek <pavel@ucw.cz>
[pavel: fix up braces]
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Revert commit 66b1ed5aa8 "ACPICA: ACPI 2.0, Hardware: Add
access_width/bit_offset support for acpi_hw_write()" that is reported
to break suspend-to-RAM (ACPI S3) on one system.
The root cause of the failure is a wrong access width value for one of
the involved registers provided by the ACPI tables, but before commit
66b1ed5aa8 that value was not taken into account at all and things
worked.
Fixes: 66b1ed5aa8 "ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write()"
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On ACPI systems that support memory-mapped config space access, i.e., ECAM,
the PCI Firmware Specification says the OS can learn where the ECAM space
is from either:
- the static MCFG table (for non-hotpluggable bridges), or
- the _CBA method (for hotpluggable bridges)
The current MCFG table handling code cannot be easily generalized owing to
x86-specific quirks, which makes it hard to reuse on other architectures.
Implement generic MCFG handling from scratch, including:
- Simple MCFG table parsing (via pci_mmcfg_late_init() as in current x86)
- MCFG region lookup for a (domain, bus_start, bus_end) tuple
[bhelgaas: changelog]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
On platforms with memory-mapped I/O ports, such as ia64 and ARM64, we have
to map the memory region and coordinate it with the arch's I/O port
accessors.
For ia64, we do this in arch code because it supports both dense (1 byte
per I/O port) and sparse (1024 bytes per I/O port) memory mapping. For
arm64, we only support dense mappings, which we can do in the generic code
with pci_register_io_range() and pci_remap_iospace().
Add acpi_pci_root_remap_iospace() to remap dense memory-mapped I/O port
space when adding a bridge, and call pci_unmap_iospace() to release the
space when removing the bridge.
[bhelgaas: changelog, move #ifdef inside acpi_pci_root_remap_iospace()]
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
[Tomasz: merged in Sinan's patch to unmap IO resources properly, updated changelog]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Another straightforward replacement of magic numbers.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jacob.jun.pan@intel.com
Cc: linux-acpi@vger.kernel.org
Link: http://lkml.kernel.org/r/20160603001946.264CE704@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
According to the Windows probing result, during the table loading, the EC
device described in the ECDT should be used. And the ECDT EC is also
effective during the period the namespace objects are initialized (we can
see a separate process executing _STA/_INI on Windows before executing
other device specific control methods, for example, EC._REG). During the
device enumration, the EC device described in the DSDT should be used. But
there are differences between Linux and Windows around the device probing
order. Thus in Linux, we should enable the DSDT EC as early as possible
before enumerating devices in order not to trigger issues related to the
device enumeration order differences.
This patch thus converts acpi_boot_ec_enable() into acpi_ec_dsdt_probe() to
fix the gap. This also fixes a user reported regression triggered after we
switched the "table loading"/"ECDT support" to be ACPI spec 2.0 compliant.
Fixes: 59f0aa9480 (ACPI 2.0 / ECDT: Remove early namespace reference from EC)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=119261
Reported-and-tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 3195ef59cb ("x86: Do full rtc synchronization with ntp") had
the side-effect of unconditionally enabling the RTC_LIB symbol on x86,
which in turn disables the selection of the CONFIG_RTC and
CONFIG_GEN_RTC drivers that contain a two older implementations of
the CONFIG_RTC_DRV_CMOS driver.
This removes x86 from the list for genrtc, and changes all references
to the asm/rtc.h header to instead point to the interfaces
from linux/mc146818rtc.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Like zlib compression in pstore, this patch added lzo and lz4
compression support so that users can have more options and better
compression ratio.
The original code treats the compressed data together with the
uncompressed ECC correction notice by using zlib decompress. The
ECC correction notice is missing in the decompression process. The
treatment also makes lzo and lz4 not working. So I treat them
separately by using pstore_decompress() to treat the compressed
data, and memcpy() to treat the uncompressed ECC correction notice.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Roland Dreier reports that one of his systems cannot boot because of
the changes made by commit ac212b6980 (ACPI / processor: Use common
hotplug infrastructure).
The problematic part of it is the request_region() call in
acpi_processor_get_info() that used to run at module init time before
the above commit and now it runs much earlier. Unfortunately, the
region(s) reserved by it fall into a range the PCI subsystem attempts
to reserve for AHCI IO BARs. As a result, the PCI reservation fails
and AHCI doesn't work, while previously the PCI reservation would
be made before acpi_processor_get_info() and it would succeed.
That request_region() call, however, was overlooked by commit
ac212b6980, as it is not necessary for the enumeration of the
processors. It only is needed when the ACPI processor driver
actually attempts to handle them which doesn't happen before
loading the ACPI processor driver module. Therefore that call
should have been moved from acpi_processor_get_info() into that
module.
Address the problem by moving the request_region() call in question
out of acpi_processor_get_info() and use the observation that the
region reserved by it is only needed if the FADT-based CPU
throttling method is going to be used, which means that it should
be sufficient to invoke it from acpi_processor_get_throttling_fadt().
Fixes: ac212b6980 (ACPI / processor: Use common hotplug infrastructure)
Reported-by: Roland Dreier <roland@purestorage.com>
Tested-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The address check in acpi_hw_get_access_bit_width() should be byte width
based, not bit width based. This patch fixes this mistake.
For those who want to review acpi_hw_access_bit_width(), here is the
concerns and the design details of the function:
It is supposed that the GAS Address field should be aligned to the byte
width indicated by the GAS AccessSize field. Similarly, for the old non
GAS register, it is supposed that its Address should be aligned to its
Length.
For the "AccessSize = 0 (meaning ANY)" case, we try to return the maximum
instruction width (64 for MMIO or 32 for PIO) or the user expected access
bit width (64 for acpi_read()/acpi_write() or 32 for acpi_hw_read()/
acpi_hw_write()) and it is supposed that the GAS Address field should
always be aligned to the maximum expected access bit width (otherwise it
can't be accessed using ANY access bit width).
The problem is in acpi_tb_init_generic_address(), where the non GAS
register's Length is converted into the GAS BitWidth field, its Address is
converted into the GAS Address field, and the GAS AccessSize field is left
0 but most of the registers actually cannot be accessed using "ANY"
accesses.
As a conclusion, when AccessSize = 0 (ANY), the Address should either be
aligned to the BitWidth (wrong conversion) or aligned to 32 for PIO or 64
for MMIO (real GAS). Since currently, max_bit_width is 32, then:
1. BitWidth for the wrong conversion is 8,16,32; and
2. The Address of the real GAS should always be aligned to 8,16,32.
The address alignment check to exclude false matched real GAS is not
necessary. Thus this patch fixes the issue by removing the address
alignment check.
On the other hand, we in fact could use a simpler check of
"reg->bit_width < max_bit_width" to exclude the "BitWidth=64 PIO" case that
may be issued from acpi_read()/acpi_write() in the future.
Fixes: b314a172ee (ACPICA: Hardware: Add optimized access bit width support)
Reported-and-tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Mike Marshall <hubcap@omnibond.com>
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Follow-on arm64 ACPI/NUMA patches need to map MADT entries very early
(before kmalloc is usable).
Add acpi_map_madt_entry() which, indirectly, uses
early_memremap()/early_memunmap() to access the table and parse out
the mpidr. The existing implementation of map_madt_entry() is
modified to take a pointer to the MADT as a parameter and the callers
adjusted.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Loosely based on code from Robert Richter and Hanjun Guo.
Improve out of range node detection as well as allow for Larger SRAT
entities.
Add printing of nice messages.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_numa_memory_affinity_init() will be reused by arm64. Move it to
drivers/acpi/numa.c to facilitate reuse.
No code change.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
bad_srat() and srat_disabled() are shared by x86 and follow-on arm64
patches. Move them to drivers/acpi/numa.c in preparation for arm64
support.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Robert Richter <rrichter@cavium.com>
[david.daney@cavium.com moved definitions to drivers/acpi/numa.c]
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Identical implementations of acpi_numa_slit_init() are used by both
x86 and follow-on arm64 support. Move it to drivers/acpi/numa.c, and
guard with CONFIG_X86 || CONFIG_ARM64 because ia64 has its own
architecture specific implementation.
No code change.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since acpi_numa_arch_fixup() is only used in arch ia64, move it there
to make a generic interface easier. This avoids empty function stubs
or some complex kconfig options for x86 and arm64.
Signed-off-by: Robert Richter <rrichter@cavium.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The argument "header" for acpi_table_print_srat_entry()
is always checked before the function is called, it's
duplicate to check it again, remove it.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI_DEBUG_PRINT is a bit fragile in acpi/numa.c, the first thing
is that component ACPI_NUMA(0x80000000) is not described in the
Documentation/acpi/debug.txt, and even not defined in the struct
acpi_dlayer acpi_debug_layers which we can not dynamically enable/disable
it with /sys/modules/acpi/parameters/debug_layer. another thing
is that ACPI_DEBUG_OUTPUT is controlled by ACPICA which not coordinate
well with ACPI drivers.
Replace ACPI_DEBUG_PRINT() with pr_debug() in this patch as pr_debug
will do the same thing for debug purpose and it can make the code much
cleaner, also remove the related code which not needed anymore if
ACPI_DEBUG_PRINT() is gone.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Just do some cleanups to replace printk with pr_fmt().
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit 059500940d (ACPI/video: export acpi_video_get_levels)
mistakenly dropped the correct value of max_level and that caused the
set_level function following failed and the acpi_video backlight interface
didn't get created. Fix this by passing back the correct max_level value.
While at it, also fix the param used in acpi_video_device_lcd_query_levels
where acpi_handle is expected but acpi_video_device is passed.
Fixes: 059500940d (ACPI/video: export acpi_video_get_levels)
Reported-and-tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Most users of IS_ERR_VALUE() in the kernel are wrong, as they
pass an 'int' into a function that takes an 'unsigned long'
argument. This happens to work because the type is sign-extended
on 64-bit architectures before it gets converted into an
unsigned type.
However, anything that passes an 'unsigned short' or 'unsigned int'
argument into IS_ERR_VALUE() is guaranteed to be broken, as are
8-bit integers and types that are wider than 'unsigned long'.
Andrzej Hajda has already fixed a lot of the worst abusers that
were causing actual bugs, but it would be nice to prevent any
users that are not passing 'unsigned long' arguments.
This patch changes all users of IS_ERR_VALUE() that I could find
on 32-bit ARM randconfig builds and x86 allmodconfig. For the
moment, this doesn't change the definition of IS_ERR_VALUE()
because there are probably still architecture specific users
elsewhere.
Almost all the warnings I got are for files that are better off
using 'if (err)' or 'if (err < 0)'.
The only legitimate user I could find that we get a warning for
is the (32-bit only) freescale fman driver, so I did not remove
the IS_ERR_VALUE() there but changed the type to 'unsigned long'.
For 9pfs, I just worked around one user whose calling conventions
are so obscure that I did not dare change the behavior.
I was using this definition for testing:
#define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \
unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO))
which ends up making all 16-bit or wider types work correctly with
the most plausible interpretation of what IS_ERR_VALUE() was supposed
to return according to its users, but also causes a compile-time
warning for any users that do not pass an 'unsigned long' argument.
I suggested this approach earlier this year, but back then we ended
up deciding to just fix the users that are obviously broken. After
the initial warning that caused me to get involved in the discussion
(fs/gfs2/dir.c) showed up again in the mainline kernel, Linus
asked me to send the whole thing again.
[ Updated the 9p parts as per Al Viro - Linus ]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.org/lkml/2016/1/7/363
Link: https://lkml.org/lkml/2016/5/27/486
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Prevent re-tuning while serving requests for RPMB partitions
- Extend timeout for long read time quirk to support more eMMCs
MMC host:
- sdhci-acpi: Ensure connected devices are powered when probing
- sdhci-pci|acpi: Remove unreliable MMC_CAP_BUS_WIDTH_TEST for Intel HWs
- dw_mmc: Correct the assigning of max_blk_size
- dw_mmc-rockchip: Allow RPMB partitions to be created
- dw_mmc-rockchip: Set the drive phase properly
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zHa6
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.7-rc1' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC fixes from Ulf Hansson:
"Here are some mmc fixes intended for v4.7 rc1. They are based on a
commit earlier in the merge window and have been tested in linux-next
for a while.
MMC core:
- Prevent re-tuning while serving requests for RPMB partitions
- Extend timeout for long read time quirk to support more eMMCs
MMC host:
- sdhci-acpi: Ensure connected devices are powered when probing
- sdhci-pci|acpi: Remove unreliable MMC_CAP_BUS_WIDTH_TEST for Intel HWs
- dw_mmc: Correct the assigning of max_blk_size
- dw_mmc-rockchip: Allow RPMB partitions to be created
- dw_mmc-rockchip: Set the drive phase properly"
* tag 'mmc-v4.7-rc1' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: sdhci-acpi: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel controllers
mmc: longer timeout for long read time quirk
mmc: dw_mmc: rockchip: Set the drive phase properly
mmc: dw_mmc: fix the wrong max_blk_size
mmc: dw_mmc-rockchip: add MMC_CAP_CMD23 capabilities
mmc: sdhci-acpi: Ensure connected devices are powered when probing
ACPI / PM: Export acpi_device_fix_up_power()
mmc: block: Pause re-tuning while switched to the RPMB partition
mmc: block: Always switch back to main area after RPMB access
mmc: core: Add a facility to "pause" re-tuning
Just one fix for incorrect async_synchronize_cookie() usage in the
ACPI battery driver (Chris Wilson).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=rO5z
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.7-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Additional ACPI update for v4.7-rc1
Just one fix for incorrect async_synchronize_cookie() usage in the
ACPI battery driver (Chris Wilson)"
* tag 'acpi-4.7-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / battery: Correctly serialise with the pending async probe
1/ Device DAX for persistent memory:
Device DAX is the device-centric analogue of Filesystem DAX
(CONFIG_FS_DAX). It allows memory ranges to be allocated and mapped
without need of an intervening file system. Device DAX is strict,
precise and predictable. Specifically this interface:
a) Guarantees fault granularity with respect to a given page size
(pte, pmd, or pud) set at configuration time.
b) Enforces deterministic behavior by being strict about what fault
scenarios are supported.
Persistent memory is the first target, but the mechanism is also
targeted for exclusive allocations of performance/feature differentiated
memory ranges.
2/ Support for the HPE DSM (device specific method) command formats.
This enables management of these first generation devices until a
unified DSM specification materializes.
3/ Further ACPI 6.1 compliance with support for the common dimm
identifier format.
4/ Various fixes and cleanups across the subsystem.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Y3Xv
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"The bulk of this update was stabilized before the merge window and
appeared in -next. The "device dax" implementation was revised this
week in response to review feedback, and to address failures detected
by the recently expanded ndctl unit test suite.
Not included in this pull request are two dax topic branches (dax
error handling, and dax radix-tree locking). These topics were
deferred to get a few more days of -next integration testing, and to
coordinate a branch baseline with Ted and the ext4 tree. Vishal and
Ross will send the error handling and locking topics respectively in
the next few days.
This branch has received a positive build result from the kbuild robot
across 226 configs.
Summary:
- Device DAX for persistent memory: Device DAX is the device-centric
analogue of Filesystem DAX (CONFIG_FS_DAX). It allows memory
ranges to be allocated and mapped without need of an intervening
file system. Device DAX is strict, precise and predictable.
Specifically this interface:
a) Guarantees fault granularity with respect to a given page size
(pte, pmd, or pud) set at configuration time.
b) Enforces deterministic behavior by being strict about what
fault scenarios are supported.
Persistent memory is the first target, but the mechanism is also
targeted for exclusive allocations of performance/feature
differentiated memory ranges.
- Support for the HPE DSM (device specific method) command formats.
This enables management of these first generation devices until a
unified DSM specification materializes.
- Further ACPI 6.1 compliance with support for the common dimm
identifier format.
- Various fixes and cleanups across the subsystem"
* tag 'libnvdimm-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (40 commits)
libnvdimm, dax: fix deletion
libnvdimm, dax: fix alignment validation
libnvdimm, dax: autodetect support
libnvdimm: release ida resources
Revert "block: enable dax for raw block devices"
/dev/dax, core: file operations and dax-mmap
/dev/dax, pmem: direct access to persistent memory
libnvdimm: stop requiring a driver ->remove() method
libnvdimm, dax: record the specified alignment of a dax-device instance
libnvdimm, dax: reserve space to store labels for device-dax
libnvdimm, dax: introduce device-dax infrastructure
nfit: add sysfs dimm 'family' and 'dsm_mask' attributes
tools/testing/nvdimm: ND_CMD_CALL support
nfit: disable vendor specific commands
nfit: export subsystem ids as attributes
nfit: fix format interface code byte order per ACPI6.1
nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism
nfit, libnvdimm: clarify "commands" vs "_DSMs"
libnvdimm: increase max envelope size for ioctl
acpi/nfit: Add sysfs "id" for NVDIMM ID
...
async_synchronize_cookie() only serialises all tasks up to the specified
cookie, and importantly does not wait for the task corresponding with
the cookie. [This is so that it can be trivially used from inside the
async_func_t in order to serialise with all preceding tasks.] In order
to serialise with acpi_battery_init_async() we need to compensate and
pass in the next cookie instead.
The impact today is zero since performing an async_schedule() from inside
a module init function will trigger an async_synchronize_full() prior to
the module loader's completion. However, if the probe was moved to its
own unregistered async_domain, then the async_synchronize_cookie would
be replaced with an async_synchronize_full_domain.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Drivers that needs acpi_device_fix_up_power(), allow them to be built as
modules by exporting this function.
Cc: <stable@vger.kernel.org> # 4.5+
Tested-by: Laszlo Fiat <laszlo.fiat@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-pci:
ACPI,PCI,IRQ: remove SCI penalize function
ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init()
ACPI,PCI,IRQ: reduce static IRQ array size to 16
ACPI,PCI,IRQ: reduce resource requirements
* acpi-misc:
ACPI / sysfs: fix error code in get_status()
ACPI / device_sysfs: Clean up checkpatch errors
ACPI / device_sysfs: Change _SUN and _STA show functions error return to EIO
ACPI / device_sysfs: Add sysfs support for _HRV hardware revision
arm64: defconfig: Enable ACPI
ACPI / ARM64: Remove EXPERT dependency for ACPI on ARM64
ACPI / ARM64: Don't enable ACPI by default on ARM64
acer-wmi: Use acpi_dev_found()
eeepc-wmi: Use acpi_dev_found()
ACPI / utils: Rename acpi_dev_present()
* acpi-tools:
tools/power/acpi: close file only if it is open
* acpica: (41 commits)
ACPICA: Update version to 20160422
ACPICA: Move all ASCII utilities to a common file
ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write()
ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support in acpi_hw_read()
ACPICA: Executer: Introduce a set of macros to handle bit width mask generation
ACPICA: Hardware: Add optimized access bit width support
ACPICA: Utilities: Add ACPI_IS_ALIGNED() macro
ACPICA: Renamed some #defined flag constants for clarity
ACPICA: ACPI 6.0, tools/iasl: Add support for new resource descriptors
ACPICA: ACPI 6.0: Update _BIX support for new package element
ACPICA: ACPI 6.1: Support for new PCCT subtable
ACPICA: Refactor evaluate_object to reduce nesting
ACPICA: Divergence: remove unwanted spaces for typedef
ACPICA: Update version to 20160318
ACPICA: Namespace: Reorder \_SB._INI to make sure it is evaluated before _REG evaluations
ACPICA: Events: Fix an issue that _REG association can happen before namespace is initialized
ACPICA: Tables: Fix wrong MLC condition for dynamic table loading
ACPICA: Interpreter: Fix wrong conditions for acpi_ev_install_region_handlers() invocation
ACPICA: Hardware: Enhance acpi_hw_validate_register() with access_width/bit_offset awareness
Utilities: Fix missing parentheses in ACPI_GET_BITS()/ACPI_SET_BITS()
...
The Makefile/Kconfig currently controlling compilation of this code is:
Makefile:acpi-$(CONFIG_ACPI_REDUCED_HARDWARE_ONLY) += evged.o
drivers/acpi/Kconfig:config ACPI_REDUCED_HARDWARE_ONLY
drivers/acpi/Kconfig: bool "Hardware-reduced ACPI support only" if EXPERT
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity so that when reading the
code there is no doubt it is builtin-only.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
The file wasn't explicitly including the module.h file but it did
already have init.h so, unlike similar changes, this one has no
header changes at all.
We also delete the MODULE_LICENSE tag since all that information
is already contained at the top of the file in the comments.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix for a recent regression in the intel_pstate driver causing
it to fail to restore the HWP (HW-managed P-states) configuration
of the boot CPU after suspend-to-RAM (Rafael Wysocki).
- Fix for two recent regressions in the intel_pstate driver, one
that can trigger a divide by zero if the driver is accessed via
sysfs before it manages to take the first sample and one causing
it to fail to update a structure field used in a trace point, so
the information coming from it is less useful (Rafael Wysocki).
- Fix for a problem in the sti-cpufreq driver introduced during
the 4.5 cycle that causes it to break CPU PM in multi-platform
kernels by registering cpufreq-dt (which subsequently doesn't
work) unconditionally and preventing the driver that would
actually work from registering (Sudeep Holla).
- Stable-candidate fix for an ARM64 cpuidle issue causing idle
state usage counters to be incorrectly updated for idle states
that were not entered due to errors (James Morse).
- Fix for a recently introduced issue in the OPP (Operating
Performance Points) framework causing it to print bogus error
messages for missing optional regulators (Viresh Kumar).
- Fix for a recently introduced issue in the generic device
properties framework that may cause it to attempt to dereferece
and invalid pointer in some cases (Heikki Krogerus).
- Fix for a deadlock in the ACPICA core that may be triggered
by device (eg. Thunderbolt) hotplug (Prarit Bhargava).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=pU+A
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"Fixes for problems introduced or discovered recently (intel_pstate,
sti-cpufreq, ARM64 cpuidle, Operating Performance Points framework,
generic device properties framework) and one fix for a hotplug-related
deadlock in ACPICA that's been there forever, but is nasty enough.
Specifics:
- Fix for a recent regression in the intel_pstate driver causing it
to fail to restore the HWP (HW-managed P-states) configuration of
the boot CPU after suspend-to-RAM (Rafael Wysocki).
- Fix for two recent regressions in the intel_pstate driver, one that
can trigger a divide by zero if the driver is accessed via sysfs
before it manages to take the first sample and one causing it to
fail to update a structure field used in a trace point, so the
information coming from it is less useful (Rafael Wysocki).
- Fix for a problem in the sti-cpufreq driver introduced during the
4.5 cycle that causes it to break CPU PM in multi-platform kernels
by registering cpufreq-dt (which subsequently doesn't work)
unconditionally and preventing the driver that would actually work
from registering (Sudeep Holla).
- Stable-candidate fix for an ARM64 cpuidle issue causing idle state
usage counters to be incorrectly updated for idle states that were
not entered due to errors (James Morse).
- Fix for a recently introduced issue in the OPP (Operating
Performance Points) framework causing it to print bogus error
messages for missing optional regulators (Viresh Kumar).
- Fix for a recently introduced issue in the generic device
properties framework that may cause it to attempt to dereferece and
invalid pointer in some cases (Heikki Krogerus).
- Fix for a deadlock in the ACPICA core that may be triggered by
device (eg Thunderbolt) hotplug (Prarit Bhargava)"
* tag 'pm+acpi-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / OPP: Remove useless check
ACPICA: Dispatcher: Update thread ID for recursive method calls
intel_pstate: Fix intel_pstate_get()
cpufreq: intel_pstate: Fix HWP on boot CPU after system resume
cpufreq: st: enable selective initialization based on the platform
ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value
device property: Avoid potential dereferences of invalid pointers
Module option to limit userspace to the publicly defined command set.
For cases where private DIMM commands may be interfering with the
kernel's handling of DIMM state this option can be set to block vendor
specific commands.
Cc: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The problem with ornamental, do-nothing gotos is that they lead to
"forgot to set the error code" bugs. We should be returning -EINVAL
here but we don't. It leads to an uninitalized variable in
counter_show():
drivers/acpi/sysfs.c:603 counter_show()
error: uninitialized symbol 'status'.
Fixes: 1c8fce27e2 (ACPI: introduce drivers/acpi/sysfs.c)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit ba60e4500053010bf775d58f6f61febbdb94d817
New file is utascii.c
Link: https://github.com/acpica/acpica/commit/ba60e450
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 48eea5e7993ccb7189bd63cd726e02adafee6057
This patch adds access_width/bit_offset support in acpi_hw_write().
Lv Zheng.
Link: https://github.com/acpica/acpica/commit/48eea5e7
Link: https://bugs.acpica.org/show_bug.cgi?id=1240
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 96ece052d4d073aae4f935f0ff0746646aea1174
ACPICA commit 3d8583a054e410f2ea4d73b48986facad9cfc0d4
This patch adds access_width/bit_offset support in acpi_hw_read().
This also enables GAS definition where bit_width is not a power of
two. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/96ece052
Link: https://github.com/acpica/acpica/commit/3d8583a0
Link: https://bugs.acpica.org/show_bug.cgi?id=1240
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit c23034a3a09d5ed79f1827d51f43cfbccf68ab64
A regression was reported to the shift offset >= width of type.
This patch fixes this issue. BZ 1270.
This is a part of the fix because the order of the patches are modified for
Linux upstream, containing the cleanups for the old code. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/c23034a3
Link: https://bugs.acpica.org/show_bug.cgi?id=1270
Reported-by: Sascha Wildner <swildner@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit c49a751b4dae7baec1790748a2b4b6e8ab599f51
For Access Size = 0, it actually can use user expected access bit width.
This patch implements this.
Besides of the ACPICA upstream commit, this patch also includes a fix fixing
the issue reported by the FreeBSD community.
The old register descriptors are translated in acpi_tb_init_generic_address()
with access_width being filled with 0. This breaks code in
acpi_hw_get_access_bit_width() when the registers are 16-bit IO ports and their
bit_width fields are filled with 16. The rapid fix is meant to make code
written for acpi_hw_get_access_bit_width() regression safer before the issue is
correctly fixed from acpi_tb_init_generic_address(). Reported by
John Baldwin <jhb@freebsd.org>, fixed by Lv Zheng <lv.zheng@intel.com>, tested
by Jung-uk Kim <jkim@freebsd.org>.
Link: https://github.com/acpica/acpica/commit/c49a751b
Reported-by: John Baldwin <jhb@freebsd.org>
Tested-by Jung-uk Kim <jkim@freebsd.org>.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 438905b205e64e742f9670a0970419c426264831
Expanded a couple of cryptic names.
Link: https://github.com/acpica/acpica/commit/438905b2
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 5a0555ece4ba9917e5842b21d88469ae06b4e815
Adds full support for:
i2c_serial_bus_v2
spi_serial_bus_v2
uart_serial_bus_v2
Compiler, Disassembler, Resource Manager, acpi_help.
Link: https://github.com/acpica/acpica/commit/5a0555ec
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 3451e6d49d37919c13ec2c0019a31534b0dfc0c0
One integer was added at the end of the _BIX method, and the
version number was incremented.
Link: https://github.com/acpica/acpica/commit/3451e6d4
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit b2294cae776f5a66a7697414b21949d307e6856f
This patch removes unwanted spaces for typedef. This solution doesn't cover
function types.
Note that the linuxize result of this commit is very giant and should have
many conflicts against the current Linux upstream. Thus it is required to
modify the linuxize result of this commit and the commits around it
manually in order to have them merged to the Linux upstream. Since this is
very costy, we should do this only once, and if we can't ensure to do this
only once, we need to revert the Linux code to the wrong indentation result
before merging the linuxize result of this commit. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/b2294cae
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Removing the SCI penalize function as the penalty is now calculated on the
fly.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_irq_get_penalty is now calculating the penalty on the fly now.
No need to maintain global list of penalties or calculate them
at the init time. Removing duplicate code in acpi_irq_penalty_init.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that the supported number of PCI IRQs are no longer capped
with 256, renaming the static array to support ISA IRQs only
and removing the MAX_IRQS constant.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Code has been redesigned to calculate penalty requirements on the fly. This
significantly simplifies the implementation and removes some of the init
calls from x86 architecture.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
_OSI handling code grows giant and it's time to move them into one file.
This patch collects all _OSI handling code into one single file.
So that we only have the following functions to be used externally:
early_acpi_osi_init(): Used by DMI detections;
acpi_osi_init(): Used to initialize OSI command line settings and install
Linux specific _OSI handler;
acpi_osi_setup(): The API that should be used by the external quirks.
acpi_osi_is_win8(): The API is used by the external drivers to determine
if BIOS supports Win8.
CONFIG_DMI is not useful as stub dmi_check_system() can make everything
stub because of strip.
No functional changes.
Tested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch performs necessary cleanups before moving OSI support to
another file.
1. Change printk into pr_xxx
2. Do not initialize values to 0
3. Do not append additional "return" at the end of the function
4. Remove useless comments which may easily break line breaking rule
After fixing the coding style issues, rename functions to make them looking
like acpi_osi_xxx.
No functional changes.
Tested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch changes "int/unsigned int" to "bool" to simplify the code.
Tested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The following commit always reports positive value when Apple hardware
queries _OSI("Darwin"):
Commit: 7bc5a2bad0
Subject: ACPI: Support _OSI("Darwin") correctly
However since this implementation places the judgement in runtime, it
breaks acpi_osi=!Darwin and cannot return unsupported for _OSI("WinXXX")
invoked before invoking _OSI("Darwin").
This patch fixes the issues by reverting the wrong support and implementing
the default behavior of _OSI("Darwin")/_OSI("WinXXX") on Apple hardware via
DMI matching.
Fixes: 7bc5a2bad0 (ACPI: Support _OSI("Darwin") correctly)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=92111
Reported-and-tested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch introduces acpi_osi=!! so that quirks may use it to revert
acpi_osi=!.
Tested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch cleans up OSI code in osl.c to make osi_linux work for OSI
strings other than "Linux", so it can be re-used for other purposes.
Tested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The order of the _OSI related functionalities is as follows:
acpi_blacklisted()
acpi_dmi_osi_linux()
acpi_osi_setup()
acpi_osi_setup()
acpi_update_interfaces() if "!*"
<<<<<<<<<<<<<<<<<<<<<<<<
parse_args()
__setup("acpi_osi=")
acpi_osi_setup_linux()
acpi_update_interfaces() if "!*"
<<<<<<<<<<<<<<<<<<<<<<<<
acpi_early_init()
acpi_initialize_subsystem()
acpi_ut_initialize_interfaces()
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
acpi_bus_init()
acpi_os_initialize1()
acpi_install_interface_handler(acpi_osi_handler)
acpi_osi_setup_late()
acpi_update_interfaces() for "!"
>>>>>>>>>>>>>>>>>>>>>>>>
acpi_osi_handler()
Since acpi_osi_setup_linux() can override acpi_dmi_osi_linux(), the command
line setting can override the DMI detection. That's why acpi_blacklisted()
is put before __setup("acpi_osi=").
Then we can notice the following wrong invocation order. There are
acpi_update_interfaces() (marked by <<<<) calls invoked before
acpi_ut_initialize_interfaces() (marked by ^^^^). This makes it impossible
to use acpi_osi=!* correctly from OSI DMI table or from the command line.
The use of acpi_osi=!* is meant to disable both ACPICA
(acpi_gbl_supported_interfaces) and Linux specific strings
(osi_setup_entries) while the ACPICA part should have stopped working
because of the order issue.
This patch fixes this issue by moving acpi_update_interfaces() to where
it is invoked for acpi_osi=! (marked by >>>>) as this is ensured to be
invoked after acpi_ut_initialize_interfaces() (marked by ^^^^). Linux
specific strings are still handled in the original place in order to make
the following command line working: acpi_osi=!* acpi_osi="Module Device".
Note that since acpi_osi=!* is meant to further disable linux specific
string comparing to the acpi_osi=!, there is no such use case in our bug
fixing work and hence there is no one using acpi_osi=!* either from the
command line or from the DMI quirks, this issue is just a theoretical
issue.
Fixes: 741d81280a (ACPI: Add facility to remove all _OSI strings)
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
Tested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cleaning up two existing checkpatch errors (and 2 warnings) in
device_sysfs.c since the file is being changed.
The change in acpi_device_setup_files() is changing spaces to a tab.
Signed-off-by: Betty Dall <betty.dall@hpe.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The error return from a sysfs show function is passed up through
the call chain and visible as the return from the read system call.
The show functions for the _STA and _SUN object currently return
-ENODEV. This patch changes the return to -EIO. ENODEV makes less
sense since the "device' exists or there wouldn't be a sysfs file.
Signed-off-by: Betty Dall <betty.dall@hpe.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI _HRV object on the device is used to supply Linux with the
device's hardware revision. This is an optional object. Add sysfs support
for the _HRV object if it exists on the device.
This change allows users to easily find the hardware version of non-PCI
hardware by looking at the sysfs 'hrv' file. It is most useful for
non-PCI devices because lspci can list the hardware version for PCI
devices.
Signed-off-by: Betty Dall <betty.dall@hpe.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_video_get_levels is useful for other drivers, i.e. the
to-be-added int3406 thermal driver, so export it.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since we will need the backlight_device_get_by_type API, we can use it
instead of the backlight_device_registered API whenever necessary so
remove the backlight_device_registered API.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 7a3bd2d962f221809f25ddb826c9e551b916eb25
Set the mutex owner thread ID.
Original patch from: Prarit Bhargava <prarit@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=115121
Link: https://github.com/acpica/acpica/commit/7a3bd2d9
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Tested-by: Andy Lutomirski <luto@kernel.org> # On a Dell XPS 13 9350
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When transportation of the command completes successfully, it indicates
that the 'status' result is valid. Fix the missed checking and
translation of the status field at the end of acpi_nfit_ctl().
Otherwise, we fail to handle reported errors and assume commands
complete successfully.
Reported-by: Linda Knippers <linda.knippers@hpe.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Similar to pci-sysfs export the subsystem information available in the
NFIT. ACPI 6.1 clarifies that this data is copied as an array of bytes
from the DIMM SPD data.
Reported-by: Ryon Jensen <ryon.jensen@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
ACPI6.1 clarifies that DCR fields are stored as an array of bytes,
update the format interface code constants to match.
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
There are currently 4 known similar but incompatible definitions of the
command sets that can be sent to an NVDIMM through ACPI. It is also
clear that future platform generations (ACPI or not) will continue to
revise and extend the DIMM command set as new devices and use cases
arrive.
It is obviously untenable to continue to proliferate divergence
of these command definitions, and to that end a standardization process
has begun to provide for a unified specification. However, that leaves a
problem about what to do with this first generation where vendors are
already shipping divergence.
The Linux kernel can support these initial diverged platforms without
giving platform-firmware free reign to continue to diverge and compound
kernel maintenance overhead. The kernel implementation can encourage
standardization in two ways:
1/ Require that any function code that userspace wants to send be
explicitly white-listed in the implementation. For ACPI this means
function codes marked as supported by acpi_check_dsm() may
only be invoked if they appear in the white-list. A function must be
publicly documented before it is added to the white-list.
2/ The above restrictions can be trivially bypassed by using the
"vendor-specific" payload command. However, since vendor-specific
commands are by definition not publicly documented and have the
potential to corrupt the kernel's view of the dimm state, we provide a
toggle to disable vendor-specific operations. Enabling undefined
behavior is a policy decision that can be made by the platform owner
and encourages firmware implementations to choose public over
private command implementations.
Based on an initial patch from Jerry Hoemann
Cc: Jerry Hoemann <jerry.hoemann@hpe.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Clarify the distinction between "commands", the ioctls userspace calls
to request the kernel take some action on a given dimm device, and
"_DSMs", the actual function numbers used in the firmware interface to
the DIMM. _DSMs are ACPI specific whereas commands are Linux kernel
generic.
This is in preparation for breaking the 1:1 implicit relationship
between the kernel ioctl number space and the firmware specific function
numbers.
Cc: Jerry Hoemann <jerry.hoemann@hpe.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This flag is a no-op now (see commit 47b0eeb3dc "clk: Deprecate
CLK_IS_ROOT", 2016-02-02) so remove it.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This flag is a no-op now (see commit 47b0eeb3dc "clk: Deprecate
CLK_IS_ROOT", 2016-02-02) so remove it.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI 6.1, section 5.2.25.9, defines an identifier for an NVDIMM.
Change the NFIT driver to add a new sysfs file "id" under nfit
directory.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Robert Elliott <elliott@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
ACPI 6.1, Table 5-133, updates NVDIMM Control Region Structure
as follows.
- Valid Fields, Manufacturing Location, and Manufacturing Date
are added from reserved range. No change in the structure size.
- IDs (SPD values) are stored as arrays of bytes (i.e. big-endian
format). The spec clarifies that they need to be represented
as arrays of bytes as well.
This patch makes the following changes to support this update.
- Change the NFIT driver to show SPD ID values in big-endian
format.
- Change sprintf format to use "0x" instead of "#" since "%#02x"
does not prepend '0'.
link: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Robert Elliott <elliott@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When ACPI was originally merged for arm64 it had only been tested on
emulators and not on real physical platforms and no platforms were
relying on it. This meant that there were concerns that there might be
serious issues attempting to use it on practical systems so it had a
dependency on EXPERT added to warn people that it was in an early stage
of development with very little practical testing. Since then things
have moved on a bit. We have seen people testing on real hardware and
now have people starting to produce some platforms (the most prominent
being the 96boards Cello) which only have ACPI support and which build
and run to some useful extent with mainline.
This is not to say that ACPI support or support for these systems is
completely done, there are still areas being worked on such as PCI, but
at this point it seems that we can be reasonably sure that ACPI will be
viable for use on ARM64 and that the already merged support works for
the cases it handles. For the AMD Seattle based platforms support
outside of PCI has been fairly complete in mainline a few releases now.
This is also not to say that we don't have vendors working with ACPI who
are trying do things that we would not consider optimal but it does not
appear that the EXPERT dependency is having a substantial impact on
these vendors.
Given all this it seems that at this point the EXPERT dependency mainly
creates inconvenience for users with systems that are doing the right
thing and gets in the way of including the ACPI code in the testing that
people are doing on mainline. Removing it should help our ongoing
testing cover those platforms with only ACPI support and help ensure
that when ACPI code is merged any problems it causes for other users are
more easily discovered.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Graeme Gregory <graeme.gregory@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Al Stone <ahs3@redhat.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Roy Franz <roy.franz@hpe.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If ACPI is selectable it is enabled by default. This is a good choice
for architectures where the overwhelming majority of systems use ACPI
like x86 and IA-64 but is less clear for architectures where it's less
common like ARM64. Change the default selection so that it's only done
explicitly on those architectures where ACPI is universally used.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
SRAT maps APIC ID to proximity domains ids (PXM). Mapping from PXM to
NUMA node ids is based on order of entries in SRAT table.
SRAT table has just LAPIC entires or mix of LAPIC and X2APIC entries.
As long as there are only LAPIC entires, mapping from proximity domain
id to NUMA node id is as assumed by BIOS. However, once APIC entries are
mixed, X2APIC entries would be first mapped which causes unexpected NUMA
node mapping.
To fix that, change parsing to check each entry against both LAPIC and
X2APIC so mapping is in the SRAT/PXM order.
This is supplemental change to the fix made by commit d81056b527
(Handle apic/x2apic entries in MADT in correct order) and using the
mechanism introduced by 9b3fedd (ACPI / tables: Add acpi_subtable_proc
to ACPI table parsers).
Fixes: d81056b527 (Handle apic/x2apic entries in MADT in correct order)
Signed-off-by: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com>
[ rjw : Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch converts the initrd table override mechanism to the table
upgrade mechanism by restricting its usage to the tables released with
compatibility and more recent revision.
This use case has been encouraged by the ACPI specification:
1. OEMID:
An OEM-supplied string that identifies the OEM.
2. OEM Table ID:
An OEM-supplied string that the OEM uses to identify the particular data
table. This field is particularly useful when defining a definition
block to distinguish definition block functions. OEM assigns each
dissimilar table a new OEM Table Id.
3. OEM Revision:
An OEM-supplied revision number. Larger numbers are assumed to be newer
revisions.
For OEMs, good practices will ensure consistency when assigning OEMID and
OEM Table ID fields in any table. The intent of these fields is to allow
for a binary control system that support services can use. Because many
support function can be automated, it is useful when a tool can
programatically determine which table release is a compatible and more
recent revision of a prior table on the same OEMID and OEM Table ID.
The facility can now be used by the vendors to upgrade wrong tables for bug
fixing purpose, thus lockdep disabling taint is not suitable for it and it
should be a default 'y' option to implement the spec encouraged use case.
Note that, by implementing table upgrade inside of ACPICA itself, it is
possible to remove acpi_table_initrd_override() and tables can be upgraded
by acpi_install_table() automatically. Though current ACPICA impelentation
hasn't implemented this, this patched changes the table flag setting timing
to allow this to be implemented in ACPICA without changing the code here.
Documentation of initrd override mechanism is upgraded accordingly.
Original-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch moves acpi_os_table_override() and
acpi_os_physical_table_override() to tables.c.
Along with the mechanisms, acpi_initrd_initialize_tables() is also moved to
tables.c to form a static function. The following functions are renamed
according to this change:
1. acpi_initrd_override() -> renamed to early_acpi_table_init(), which
invokes acpi_table_initrd_init()
2. acpi_os_physical_table_override() -> which invokes
acpi_table_initrd_override()
3. acpi_initialize_initrd_tables() -> renamed to acpi_table_initrd_scan()
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI specification states that arguments "Revision ID" and "Function
Index" to a _DSM are type "Integer." Type Integers are 64 bit
quantities.
The function evaluate_dsm specifies these types as simple "int" which
are 32 bits. Widen type passed to acpi_evaluate_dsm and its callers and
derived callers to pass correct type.
acpi_check_dsm and acpi_evaluate_dsm_typed had similar issue and were
corrected as well.
This is in preparation for libnvdimm implementing a generic _DSM
passthrough facility to have the capacity to pass 64-bit values as the
ACPI specification allows.
[djbw: clarify the changelog, add rationale]
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
It's minor but that's still better to use ACPI_SIG_NFIT instead of hard
coded string.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Acked-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Starting with ACPI 6.1 an NFIT table will report multiple 'NVDIMM
Control Region Structure' instances per-dimm, one for each supported
format interface. Report that code in the following format in sysfs:
nmemX/nfit/formats
nmemX/nfit/format
nmemX/nfit/format1
nmemX/nfit/format2
...
nmemX/nfit/formatN
Where format2 - formatN are theoretical as there are no known DIMMs with
support for more than two interface formats.
This layout is compatible with existing libndctl binaries that only
expect one code per-dimm as they will ignore nmemX/nfit/formats and
nmemX/nfit/formatN.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
acpi_dev_present() was originally named after pci_dev_present()
to signify the similarity of the two functions.
However Rafael J. Wysocki pointed out that the exported function
acpi_dev_present() is easily confused with the non-exported
acpi_device_is_present(). Additionally in ACPI parlance the term
"present" usually refers to the "device is present" bit returned
by the _STA control method, yet acpi_dev_present() merely checks
presence in the namespace. It does not invoke _STA at all, let
alone check the "device is present" bit.
As suggested by Rafael, rename the function to acpi_dev_found()
and adjust all existing call sites.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With wrong ECDT fixes reverted, it is possible to put ECDT probing before
acpi_enable_subsystem().
But the ultimate purpose of ECDT re-enabling is to put the ECDT probing
before the namespace initialization (acpi_load_tables()). This patch
achieves this with protections so that we can enable it later when all
necessary corrections are upstreamed.
Link 4: https://bugzilla.kernel.org/show_bug.cgi?id=112911
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All operation region accesses are allowed by AML interpreter when AML is
executed, so actually BIOSen are responsible to avoid the operation region
accesses in AML before OSPM has prepared an operation region driver. This
is done via _REG control method. So AML code normally sets a global named
object REGC to 1 when _REG(3, 1) is evaluated.
Then what is ECDT? Quoting from ACPI spec 6.0, 5.2.15 Embedded Controller
Boot Resources Table (ECDT):
"The presence of this table allows OSPM to provide Embedded Controller
operation region space access before the namespace has been evaluated."
Spec also suggests a compatible mean to indicate the early EC access
availability:
Device (EC)
{
Name (REGC, Ones)
Method (_REG, 2)
{
If (LEqual (Arg0, 3))
{
Store (Arg1, REGC)
}
}
Method (ECAV)
{
If (LEqual (REGC, Ones))
{
If (LGreaterEqual (_REV, 2))
{
Return (One)
}
Else
{
Return (Zero)
}
}
Else
{
Return (REGC)
}
}
}
In this way, it allows EC accesses to happen before EC._REG(3, 1) is
invoked.
But ECAV is not the only way practical BIOSen using to indicate the early
EC access availibility, the known variations include:
1. Setting REGC to One in \_SB._INI when _REV >= 2. Since \_SB._INI is the
first control method evaluated by OSPM during the enumeration, this
allows EC accesses to happen for the entire enumeration process before
the namespace EC is enumerated.
2. Initialize REGC to One by default, this even allows EC accesses to
happen during the table loading.
Linux is now broken around ECDT support during the long term bug fixing
work because it has merged many wrong ECDT bug fixes (see details below).
Linux currently uses namespace EC's settings instead of ECDT settings when
ECDT is detected. This apparently will result in namespace walk and
_CRS/_GPE/_REG evaluations. Such stuffs could only happen after namespace
is ready, while ECDT is purposely to be used before namespace is ready.
The wrong bug fixing story is:
1. Link 1:
At Linux ACPI early stages, "no _Lxx/_Exx/_Qxx evaluation can happen
before the namespace is ready" are not ensured by ACPICA core and Linux.
This is currently ensured by deferred enabling of GPE and defered
registering of EC query methods (acpi_ec_register_query_methods).
2. Link 2:
Reporters reported buggy ECDTs, expecting quirks for the platform.
Originally, the quirk is simple, only doing things with ECDT.
Bug 9399 and 12461 are platforms (Asus L4R, Asus M6R, MSI MS-171F)
reported to have wrong ECDT IO port addresses, the port addresses are
reversed.
Bug 11880 is a platform (Asus X50GL) reported to have 0 valued port
addresses, we can see that all EC accesses are protected by ECAV on
this platform, so actually no early EC accesses is required by this
platform.
3. Link 3:
But when the bug fixing developer was requested to provide a handy and
non-quirk bug fix, he tried to use correct EC settings from namespace
and broke the spec purpose. We can even see that the developer was
suffered from many regrssions. One interesting one is 14086, where the
actual root cause obviously should be: _REG is evaluated too early. But
unfortunately, the bug is fixed in a totally wrong way.
So everything goes wrong from these commits:
Commit: c6cb0e8784
Subject: ACPI: EC: Don't trust ECDT tables from ASUS
Commit: a5032bfdd9
Subject: ACPI: EC: Always parse EC device
This patch reverts Linux behavior to simple ECDT quirk support in order to
stop early _CRS/_GPE/_REG evaluations.
For Bug 9399, 12461, since it is reported that the platforms require early
EC accesses, this patch restores the simple ECDT quirks for them.
For Bug 11880, since it is not reported that the platform requires early EC
accesses and its ACPI tables contain correct ECAV, we choose an ECDT
enumeration failure for this platform.
Link 1: https://bugzilla.kernel.org/show_bug.cgi?id=9916http://bugzilla.kernel.org/show_bug.cgi?id=10100https://lkml.org/lkml/2008/2/25/282
Link 2: https://bugzilla.kernel.org/show_bug.cgi?id=9399https://bugzilla.kernel.org/show_bug.cgi?id=12461https://bugzilla.kernel.org/show_bug.cgi?id=11880
Link 3: https://bugzilla.kernel.org/show_bug.cgi?id=11884https://bugzilla.kernel.org/show_bug.cgi?id=14081https://bugzilla.kernel.org/show_bug.cgi?id=14086https://bugzilla.kernel.org/show_bug.cgi?id=14446
Link 4: https://bugzilla.kernel.org/show_bug.cgi?id=112911
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch splits EC_FLAGS_HANDLERS_INSTALLED so that address space handler
can be installed when it is not possible to install GPE handler during
early stage.
This patch also tunes address space handler installation, making it
happening earlier than GPE handler installation for the same purpose.
Since acpi_ec_start()/acpi_ec_stop() will be entered multiple times after
applying this change, it is also required to protect acpi_enable_gpe()/
acpi_disable_gpe() invocations.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=112911
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The problem is Linux registers pm_power_off = efi_power_off only if
we are in hardware reduced mode. Actually, what we also want is to do
this when ACPI S5 is simply not supported on non-legacy platforms.
Since some future Intel platforms are HW-full mode where the DSDT
fails to supply an _S5 object(without SLP_TYP), we should let such
kind of platform to leverage efi runtime service to poweroff.
This patch uses efi power off as first choice when S5 is unavailable,
even if there is a customized poweroff(driver provided, eg).
Meanwhile, the legacy platforms will not be affected because there is
no path for them to overwrite the pm_power_off to efi power off.
Suggested-by: Len Brown <len.brown@intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Generic Event Device described in ACPI 6.1 allows platforms to handle
platform interrupts in ACPI ASL statements. It borrows constructs like
_EVT from GPIO events. All interrupts are listed in _CRS and the handler
is written in _EVT method. Here is an example.
Device (GED0)
{
Name (_HID, "ACPI0013")
Name (_UID, 0)
Name(_CRS, ResourceTemplate ()
{
Interrupt(ResourceConsumer, Edge, ActiveHigh, Shared, , , )
{123}
})
Method (_EVT, 1) {
if (Lequal(123, Arg0))
{
}
}
}
Wake capability has not been implemented yet.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit f005ee6b90d152c1f499efcca6b771a93903cb55
This patch splits \_SB._INI evaluation from device initialization code, so
that it can be performed before PCI_Config _REG evaluations. This is
required for the device enumeration process. Some named objects are
initialized in \_SB._INI and PCI_Config _REG evaluations may use
uninitialized named objects because of the order issue.
This must be fixed before fixing ECDT order issue. There are existing
tables allowing ECDT EC to be used for the entire device enumeration
process, but the enabling of ECDT EC is done in \_SB._INI. Thus \_SB._INI
must be the first control method evaluated in the device enumeration
process. Normally, the order should be automatically ensured by the device
enumeration process itself (for example, PCI_Config _REGs are evaluated by
the PCI bus driver when the driver is probed by the enumeration process),
but since the process is split on Linux (partially done in Linux, partially
done in ACPICA), we need to ensure this with special logics in order to be
regression safe. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/f005ee6b
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit c508f8592efaa0d8197f26d7fee6382c5ac8e383
Current code flow cannot ensure _REG association can happen after the
namespace is initialized, so we move _REG association to where _REG was
about to run to fix this issue.
This issue is detected when acpi_ev_initialize_region() is invoked during
the table loading. And this is one of the most important the root cause why
ACPICA table loading is split into 2 load passes. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/c508f859
Link: https://bugs.acpica.org/show_bug.cgi?id=1252
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 5798cd6171ea38bcf4594d0ccc78870784776ba5
The patch corrects wrong condition before group MLC is disabled.
Link: https://github.com/acpica/acpica/commit/5798cd61
Link: https://bugs.acpica.org/show_bug.cgi?id=1262
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 9a6ecc9ec9ee067cad51eec539230bf494421d76
Since AE_ALREADY_EXISTS has already been converted to AE_OK in
acpi_ev_install_region_handlers(), this patch simplies a return value
check. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/9a6ecc9e
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 997a90f810a4cb78604ef2e187611a181b498286
This patch enhances acpi_hw_validate_register() to sanitize register
accesses with awareness of access_width and bit_offset. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/997a90f8
Link: https://bugs.acpica.org/show_bug.cgi?id=1240
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some compilers require parentheses to be enforced in the macro definition,
so that the macro caller side can be simpler.
This patch fixes this kind of macro issue in
ACPI_SET_BITS()/ACPI_GET_BITS(). Lv Zheng.
Link: https://bugs.acpica.org/show_bug.cgi?id=1268
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit cbcb77565c5032dd48e19b3a8a8b8704c5f29faf
This patch adds a macro ACPI_IS_POWER_OF_TWO, which can be used to
detect if a number is a power of two. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/cbcb7756
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 16cd0872a070c8d3b16b8b13c1fc90a443a6b6fe
If the definition of a control method cannot be found (probably it
is in another module/SSDT), the disassembler must try to guess
at the number of arguments to that method. This change improves
the guessing heuristic.
Link: https://github.com/acpica/acpica/commit/16cd0872
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 795e136d2ac77c1c8b091fba019b5fe36a44a323
Fixes a problem with the merger of the two internal versions
of this function. Make the maximum integer width (32-bit or
64-bit) a parameter to the function so that it no longer
exclusively uses the integer width specified in the DSDT/SSDT.
ACPICA BZ 1260
Link: https://github.com/acpica/acpica/commit/795e136d
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 9ed98dc36645aaeba11967722951156650d94f47
For consistency, cleanup function invocations.
Link: https://github.com/acpica/acpica/commit/9ed98dc3
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 0e6125401cf38427d5376f4bafbfb3d5a40f8467
Use local variables for access to string/value Op fields.
Move duplicate PLD string tables to a single common table.
Link: https://github.com/acpica/acpica/commit/0e612540
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit e068948f49eb61a78c211028976a174604c5644a
Fix some issues in the exutils.c file.
Link: https://github.com/acpica/acpica/commit/e068948f
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 60d9cfd403a9824199b971597c930f6f563e5c71
Allows all object types to be used with Concatenate. Objects
other than Int/Str/Buf are convert to a string that contains
the type of the object. Improves the utility of the Printf
and Fprintf macros.
Adds a new file, exconcat.c
Link: https://github.com/acpica/acpica/commit/60d9cfd4
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 5f21bddaa2cec035ca80608803ce2f0858d4f387
Small changes:
1) A couple new predefined names
2) New _HID values
3) New subtable for HEST
Link: https://github.com/acpica/acpica/commit/5f21bdda
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit bca0c4cb063ee488c543e6f160fe89679a2338d6
Update a warning message
simplify versioning for "table too big" case.
Link: https://github.com/acpica/acpica/commit/bca0c4cb
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The patch reduces source code differences between the Linux kernel and the
ACPICA upstream so that the linuxized ACPICA 20160212 release can be
applied with reduced human intervention.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: White space damage fixes ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are several reports of freeze on enabling HWP (Hardware PStates)
feature on Skylake-based systems by the Intel P-states driver. The root
cause is identified as the HWP interrupts causing BIOS code to freeze.
HWP interrupts use the thermal LVT which can be handled by Linux
natively, but on the affected Skylake-based systems SMM will respond
to it by default. This is a problem for several reasons:
- On the affected systems the SMM thermal LVT handler is broken (it
will crash when invoked) and a BIOS update is necessary to fix it.
- With thermal interrupt handled in SMM we lose all of the reporting
features of the arch/x86/kernel/cpu/mcheck/therm_throt driver.
- Some thermal drivers like x86-package-temp depend on the thermal
threshold interrupts signaled via the thermal LVT.
- The HWP interrupts are useful for debugging and tuning
performance (if the kernel can handle them).
The native handling of thermal interrupts needs to be enabled
because of that.
This requires some way to tell SMM that the OS can handle thermal
interrupts. That can be done by using _OSC/_PDC in processor
scope very early during ACPI initialization.
The meaning of _OSC/_PDC bit 12 in processor scope is whether or
not the OS supports native handling of interrupts for Collaborative
Processor Performance Control (CPPC) notifications. Since on
HWP-capable systems CPPC is a firmware interface to HWP, setting
this bit effectively tells the firmware that the OS will handle
thermal interrupts natively going forward.
For details on _OSC/_PDC refer to:
http://www.intel.com/content/www/us/en/standards/processor-vendor-specific-acpi-specification.html
To implement the _OSC/_PDC handshake as described, introduce a new
function, acpi_early_processor_osc(), that walks the ACPI
namespace looking for ACPI processor objects and invokes _OSC for
them with bit 12 in the capabilities buffer set and terminates the
namespace walk on the first success.
Also modify intel_thermal_interrupt() to clear HWP status bits in
the HWP_STATUS MSR to acknowledge HWP interrupts (which prevents
them from firing continuously).
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject & changelog, function rename ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix for an intel_pstate driver issue related to the handling of
MSR updates uncovered by the recent cpufreq rework (Rafael Wysocki).
- cpufreq core cleanups related to starting governors and frequency
synchronization during resume from system suspend and a locking
fix for cpufreq_quick_get() (Rafael Wysocki, Richard Cochran).
- acpi-cpufreq and powernv cpufreq driver updates (Jisheng Zhang,
Michael Neuling, Richard Cochran, Shilpasri Bhat).
- intel_idle driver update preventing some Skylake-H systems
from hanging during initialization by disabling deep C-states
mishandled by the platform in the problematic configurations (Len
Brown).
- Intel Xeon Phi Processor x200 support for intel_idle (Dasaratharaman
Chandramouli).
- cpuidle menu governor updates to make it always honor PM QoS
latency constraints (and prevent C1 from being used as the
fallback C-state on x86 when they are set below its exit latency)
and to restore the previous behavior to fall back to C1 if the next
timer event is set far enough in the future that was changed in 4.4
which led to an energy consumption regression (Rik van Riel, Rafael
Wysocki).
- New device ID for a future AMD UART controller in the ACPI driver
for AMD SoCs (Wang Hongcheng).
- Rockchip rk3399 support for the rockchip-io-domain adaptive voltage
scaling (AVS) driver (David Wu).
- ACPI PCI resources management fix for the handling of IO space
resources on architectures where the IO space is memory mapped
(IA64 and ARM64) broken by the introduction of common ACPI
resources parsing for PCI host bridges in 4.4 (Lorenzo Pieralisi).
- Fix for the ACPI backend of the generic device properties API
to make it parse non-device (data node only) children of an
ACPI device correctly (Irina Tirdea).
- Fixes for the handling of global suspend flags (introduced in 4.4)
during hibernation and resume from it (Lukas Wunner).
- Support for obtaining configuration information from Device Trees
in the PM clocks framework (Jon Hunter).
- ACPI _DSM helper code and devfreq framework cleanups (Colin Ian
King, Geert Uytterhoeven).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=hUVj
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management and ACPI updates from Rafael Wysocki:
"The second batch of power management and ACPI updates for v4.6.
Included are fixups on top of the previous PM/ACPI pull request and
other material that didn't make into it but still should go into 4.6.
Among other things, there's a fix for an intel_pstate driver issue
uncovered by recent cpufreq changes, a workaround for a boot hang on
Skylake-H related to the handling of deep C-states by the platform and
a PCI/ACPI fix for the handling of IO port resources on non-x86
architectures plus some new device IDs and similar.
Specifics:
- Fix for an intel_pstate driver issue related to the handling of MSR
updates uncovered by the recent cpufreq rework (Rafael Wysocki).
- cpufreq core cleanups related to starting governors and frequency
synchronization during resume from system suspend and a locking fix
for cpufreq_quick_get() (Rafael Wysocki, Richard Cochran).
- acpi-cpufreq and powernv cpufreq driver updates (Jisheng Zhang,
Michael Neuling, Richard Cochran, Shilpasri Bhat).
- intel_idle driver update preventing some Skylake-H systems from
hanging during initialization by disabling deep C-states mishandled
by the platform in the problematic configurations (Len Brown).
- Intel Xeon Phi Processor x200 support for intel_idle
(Dasaratharaman Chandramouli).
- cpuidle menu governor updates to make it always honor PM QoS
latency constraints (and prevent C1 from being used as the fallback
C-state on x86 when they are set below its exit latency) and to
restore the previous behavior to fall back to C1 if the next timer
event is set far enough in the future that was changed in 4.4 which
led to an energy consumption regression (Rik van Riel, Rafael
Wysocki).
- New device ID for a future AMD UART controller in the ACPI driver
for AMD SoCs (Wang Hongcheng).
- Rockchip rk3399 support for the rockchip-io-domain adaptive voltage
scaling (AVS) driver (David Wu).
- ACPI PCI resources management fix for the handling of IO space
resources on architectures where the IO space is memory mapped
(IA64 and ARM64) broken by the introduction of common ACPI
resources parsing for PCI host bridges in 4.4 (Lorenzo Pieralisi).
- Fix for the ACPI backend of the generic device properties API to
make it parse non-device (data node only) children of an ACPI
device correctly (Irina Tirdea).
- Fixes for the handling of global suspend flags (introduced in 4.4)
during hibernation and resume from it (Lukas Wunner).
- Support for obtaining configuration information from Device Trees
in the PM clocks framework (Jon Hunter).
- ACPI _DSM helper code and devfreq framework cleanups (Colin Ian
King, Geert Uytterhoeven)"
* tag 'pm+acpi-4.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
PM / AVS: rockchip-io: add io selectors and supplies for rk3399
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
ACPI / PM: Runtime resume devices when waking from hibernate
PM / sleep: Clear pm_suspend_global_flags upon hibernate
cpufreq: governor: Always schedule work on the CPU running update
cpufreq: Always update current frequency before startig governor
cpufreq: Introduce cpufreq_update_current_freq()
cpufreq: Introduce cpufreq_start_governor()
cpufreq: powernv: Add sysfs attributes to show throttle stats
cpufreq: acpi-cpufreq: make Intel/AMD MSR access, io port access static
PCI: ACPI: IA64: fix IO port generic range check
ACPI / util: cast data to u64 before shifting to fix sign extension
cpufreq: powernv: Define per_cpu chip pointer to optimize hot-path
cpuidle: menu: Fall back to polling if next timer event is near
cpufreq: acpi-cpufreq: Clean up hot plug notifier callback
intel_pstate: Do not call wrmsrl_on_cpu() with disabled interrupts
cpufreq: Make cpufreq_quick_get() safe to call
ACPI / property: fix data node parsing in acpi_get_next_subnode()
ACPI / APD: Add device HID for future AMD UART controller
...
Rafael J. Wysocki
Dan Williams
Vishal Verma
Linus Torvalds
Sudeep Holla
Lee, Chun-Yi
Srinivas Pandruvada
Paul Gortmaker
Richard Cochran
Mika Westerberg
Octavian Purdila
Lv Zheng
Sajjan, Vikas C
Prakash, Prashanth
Shannon Zhao
Baoquan He
Sinan Kaya
Ocean He
Huang Ying
Felipe Balbi
Hoan Tran
Bin Gao
Borislav Petkov
Bhaktipriya Shridhar
Joe Perches
Alex Hung
Ralf Gerbig
Hanjun Guo
Aleksey Makarov
stuart hayes
Ingo Molnar
Tomasz Nowicki
Jayachandran C
Dave Hansen
Arnd Bergmann
Geliang Tang
David Daney
Robert Richter
Aaron Lu
Chris Wilson
Ulf Hansson
Dan Carpenter
Bob Moore
Chen Yu
Betty Dall
Prarit Bhargava
Stephen Boyd
Toshi Kani
Mark Brown
Lukasz Anaczkowski
Jerry Hoemann
Lukas Wunner