fs: Use <linux/capability.h> where capable() is used.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
remove checks now in the VFS
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
)
From: Christoph Hellwig <hch@lst.de>
The xattr code has rather complex permission checks because the rules are very
different for different attribute namespaces. This patch moves as much as we
can into the generic code. Currently all the major disk based filesystems
duplicate these checks, while many minor filesystems or network filesystems
lack some or all of them.
To do this we need defines for the extended attribute names in common code, I
moved them up from JFS which had the nicest defintions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch converts the inode semaphore to a mutex. I have tested it on
XFS and compiled as much as one can consider on an ia64. Anyway your
luck with it might be different.
Modified-by: Ingo Molnar <mingo@elte.hu>
(finished the conversion)
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch add EXPORT_SYMBOL(filemap_write_and_wait) and use it.
See mm/filemap.c:
And changes the filemap_write_and_wait() and filemap_write_and_wait_range().
Current filemap_write_and_wait() doesn't wait if filemap_fdatawrite()
returns error. However, even if filemap_fdatawrite() returned an
error, it may have submitted the partially data pages to the device.
(e.g. in the case of -ENOSPC)
<quotation>
Andrew Morton writes,
If filemap_fdatawrite() returns an error, this might be due to some
I/O problem: dead disk, unplugged cable, etc. Given the generally
crappy quality of the kernel's handling of such exceptions, there's a
good chance that the filemap_fdatawait() will get stuck in D state
forever.
</quotation>
So, this patch doesn't wait if filemap_fdatawrite() returns the -EIO.
Trond, could you please review the nfs part? Especially I'm not sure,
nfs must use the "filemap_fdatawrite(inode->i_mapping) == 0", or not.
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linux-formatted jfs partitions have a different idea about what i_size
represents than partitions formatted on OS/2. The i_size calculation is
now based on the size of the directory index. For legacy partitions, which
have no directory index, the i_size is never being updated.
This patch adds back the original i_size calculations for legacy partitions.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
jfs has never been setting i_ctime or i_mtime when creating either hard
or symbolic links. I'm surprised nobody had noticed until now.
Thanks to Chris Spiegel for reporting the problem.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with
a many-threaded application which concurrently initializes different parts of
a large anonymous area.
This patch corrects that, by using a separate spinlock per page table page, to
guard the page table entries in that page, instead of using the mm's single
page_table_lock. (But even then, page_table_lock is still used to guard page
table allocation, and anon_vma allocation.)
In this implementation, the spinlock is tucked inside the struct page of the
page table page: with a BUILD_BUG_ON in case it overflows - which it would in
the case of 32-bit PA-RISC with spinlock debugging enabled.
Splitting the lock is not quite for free: another cacheline access. Ideally,
I suppose we would use split ptlock only for multi-threaded processes on
multi-cpu machines; but deciding that dynamically would have its own costs.
So for now enable it by config, at some number of cpus - since the Kconfig
language doesn't support inequalities, let preprocessor compare that with
NR_CPUS. But I don't think it's worth being user-configurable: for good
testing of both split and unsplit configs, split now at 4 cpus, and perhaps
change that to 8 later.
There is a benefit even for singly threaded processes: kswapd can be attacking
one part of the mm while another part is busy faulting.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The xtTruncate code was only doing this for leaf pages. When a file is
horribly fragmented, we may truncate a file leaving an internal page with
an invalid head.next field, which may cause a stale page to be referenced.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
- ->releasepage() annotated (s/int/gfp_t), instances updated
- missing gfp_t in fs/* added
- fixed misannotation from the original sweep caught by bitwise checks:
XFS used __nocast both for gfp_t and for flags used by XFS allocator.
The latter left with unsigned int __nocast; we might want to add a
different type for those but for now let's leave them alone. That,
BTW, is a case when __nocast use had been actively confusing - it had
been used in the same code for two different and similar types, with
no way to catch misuses. Switch of gfp_t to bitwise had caught that
immediately...
One tricky bit is left alone to be dealt with later - mapping->flags is
a mix of gfp_t and error indications. Left alone for now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes up a few problems with jfs's reserved inodes.
1. There is no need for the jfs code setting the I_DIRTY bits in i_state.
I am ashamed that the code ever did this, and surprised it hasn't been
noticed until now.
2. Make sure special inodes are on an inode hash list. If the inodes are
unhashed, __mark_inode_dirty will fail to put the inode on the
superblock's dirty list, and the data will not be flushed under memory
pressure.
3. Force writing journal data to disk when metapage_writepage is unable to
write a metadata page due to pending journal I/O.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
The fix in inode.c is a real bug. It could result in undeleted, yet
unconnected files on big-endian hardware.
The others are trivial.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Clash due to new delete_inode behavior (the filesystem now needs to do
the truncate_inode_pages() call itself).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update the file systems in fs/ implementing a delete_inode() callback to
call truncate_inode_pages(). One implementation note: In developing this
patch I put the calls to truncate_inode_pages() at the very top of those
filesystems delete_inode() callbacks in order to retain the previous
behavior. I'm guessing that some of those could probably be optimized.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If /etc/mtab is a regular file all of the mount options (of a file system)
are written to /etc/mtab by the mount command. The quota tools look there
for the quota strings for their operation. If, however, /etc/mtab is a
symlink to /proc/mounts (a "good thing" in some environments) the tools
don't write anything - they assume the kernel will take care of things.
While the quota options are sent down to the kernel via the mount system
call and the file system codes handle them properly unfortunately there is
no code to echo the quota strings into /proc/mounts and the quota tools
fail in the symlink case.
The attached patchs modify the EXT[2|3] and JFS codes to add the necessary
hooks. The show_options function of each file system in these patches
currently deal with only those things that seemed related to quotas;
especially in the EXT3 case more can be done (later?).
Jan Kara also noted the difficulty in moving these changes above the FS
codes responding similarly to myself to Andrew's comment about possible
VFS migration. Issue summary:
- FS codes have to process the entire string of options anyway.
- Only FS codes that use quotas must have a show_options function (for
quotas to work properly) however quotas are only used in a small number
of FS.
- Since most of the quota using FS support other options these FS codes
should have the a show_options function to show those options - and the
quota echoing becomes virtually negligible.
Based on feedback I have modified my patches from the original:
JFS a missing patch has been restored to the posting
EXT[2|3] and JFS always use the show_options function
- Each FS has at least one FS specific option displayed
- QUOTA output is under a CONFIG_QUOTA ifdef
- a follow-on patch will add a multitude of options for each FS
EXT[2|3] and JFS "quota" is treated as "usrquota"
EXT3 journalled data check for journalled quota removed
EXT[2|3] mount when quota specified but not compiled in
- no changes from my original patch. I tested the patch and the codes
warn but
- still mount. With all due respection I believe the comments
otherwise were a
- misread of the patch. Please reread/test and comment. XFS patch
removed - the XFS team already made the necessary changes EXT3 mixing
old and new quotas are handled differently (not purely exclusive)
- if old and new quotas for the same type are used together the old
type is silently depricated for compatability (e.g. usrquota and
usrjquota)
- mixing of old and new quotas is an error (e.g. usrjquota and
grpquota)
Signed-off-by: Mark Bellon <mbellon@mvista.com>
Acked-by: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
TxAnchor.anon_list is protected by jfsTxnLock (TXN_LOCK), but there was
a place in txLock() that was removing an entry from the list without holding
the spinlock.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Some error paths may iput an invalid inode with i_nlink=0. jfs should
not try to actually delete such an inode.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Under heavy load, hot metadata pages are often locked by non-committed
transactions, making them difficult to flush to disk. This prevents
the sync point from advancing past a transaction that had modified the
page.
There is a point during the sync barrier processing where all
outstanding transactions have been committed to disk, but no new
transaction have been allowed to proceed. This is the best time
to write the metadata.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
A failure in dbAlloc caused a directory's i_blocks to be incorrectly
incremented, causing jfs_fsck to find the inode to be corrupt.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
If a metadata page is kept active, it is possible that the sync barrier logic
continues to trigger, even if all active transactions have been phyically
written to the journal. This can cause a hang, since the completion of the
journal I/O is what unsets the sync barrier flag to allow new transactions
to be created.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
This is half of a patch that Qu Fuping submitted in April. The first part
was applied to fs/mpage.c in 2.6.12-rc4.
jfs_fsync should return error, but it doesn't wait for the metadata page to
be uptodate, e.g.:
jfs_fsync->jfs_commit_inode->txCommit->diWrite->read_metapage->
__get_metapage->read_cache_page reads a page from disk. Because read is
async, when read_cache_page: err = filler(data, page), filler will not
return error, it just submits I/O request and returns. So, page is not
uptodate. Checking only if(IS_ERROR(mp->page)) is not enough, we should
add "|| !PageUptodate(mp->page)"
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
All of the different xattr namespaces have different rules.
user.* and ACL's are not allowed on symlinks, and since these were the
first xattrs implemented, I assumed there was no need to support xattrs
on symlinks. This one-line patch should fix it.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
I'm finally getting around to cleaning out debug code that I've never used.
There has always been code ifdef'ed out by _JFS_DEBUG_DMAP, _JFS_DEBUG_IMAP,
_JFS_DEBUG_DTREE, and _JFS_DEBUG_XTREE, which I have personally never used,
and I doubt that anyone has since the design stage back in OS/2. There is
also a function, xtGather, that has never been used, and I don't know why it
was ever there.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
1. Establish a simple API for process freezing defined in linux/include/sched.h:
frozen(process) Check for frozen process
freezing(process) Check if a process is being frozen
freeze(process) Tell a process to freeze (go to refrigerator)
thaw_process(process) Restart process
frozen_process(process) Process is frozen now
2. Remove all references to PF_FREEZE and PF_FROZEN from all
kernel sources except sched.h
3. Fix numerous locations where try_to_freeze is manually done by a driver
4. Remove the argument that is no longer necessary from two function calls.
5. Some whitespace cleanup
6. Clear potential race in refrigerator (provides an open window of PF_FREEZE
cleared before setting PF_FROZEN, recalc_sigpending does not check
PF_FROZEN).
This patch does not address the problem of freeze_processes() violating the rule
that a task may only modify its own flags by setting PF_FREEZE. This is not clean
in an SMP environment. freeze(process) is therefore not SMP safe!
Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Basically, we saw a large amount of time spent in the
jfs_strfromUCS_le() function, mispredicting the branch inside the
loop, so I just added some unlikely modifiers to the if statements to
re-ordered the code. Again, these simple changes provided > 2 % on
spec-sfs, so please consider it for inclusion.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
This file duplicates <linux/posix_acl_xattr.h>, using slightly different
names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
fs/jfs/jfs_logmgr.c: In function `jfs_flush_journal':
fs/jfs/jfs_logmgr.c:1632: warning: unused variable `mp'
Some debug code in jfs_flush_journal does nothing when CONFIG_JFS_DEBUG
is not defined. Place the whole code segment within an ifdef to avoid
unnecessary code to be compiled and the warning to be issued.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
add_missing_indices() must set tlck->type to tlckBTROOT when modifying
a root btree root to avoid a trap in txRelease()
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
kfree() can handle a NULL pointer, don't worry about passing it one.
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Modify xtSearch so that it returns the next allocated block when the
requested block is unmapped. This can be used to make sure we don't
create a new extent that overlaps the next one.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds jfs_syncpt, which calls lmLogSync to write sync points
to the journal both in jfs_sync_fs and when sync barrier processing
completes.
lmLogSync accomplishes two things: 1) it pushes logged-but-dirty
metadata pages to disk, and 2) it writes a sync record to the journal
so that jfs_fsck doesn't need to replay more transactions than is
necessary.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
jfs has never worked on architecutures where the page size was not 4K.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
JFS code has always assumed a page size of 4K. This patch fixes the
non-pagecache uses of pages to deal with larger pages.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
JFS was creating a new IAG (inode aggregate group) in one address
space, and afterwards, accessing it from another. This could lead to
complications when cache pages contain more than one page of jfs
metadata. This patch causes the IAG to be initialized in the same
address space that it is subsequently accessed with.
This also elimitates an I/O, but IAG's aren't created too often.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use an inline pxd list rather than an xad list in the xadlock.
When the number of extents being modified can fit with the xadlock,
a transaction can be committed asynchronously. Using a list of
pxd's instead of xad's allows us to fit 4 extents, rather than 2.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Dave Kleikamp
Randy Dunlap
Christoph Hellwig
akpm@osdl.org
Jes Sorensen
OGAWA Hirofumi
Arjan van de Ven
Hugh Dickins
Linus Torvalds
Al Viro
Mark Fasheh
Mark Bellon
Al Viro
Qu Fuping
Ian Dall
Christoph Lameter
Sonny Rao
Jesper Juhl
Linus Torvalds