Граф коммитов

106 Коммитов

Автор SHA1 Сообщение Дата
Xin Long 1475ee0ac9 xfrm: add is_ipip to struct xfrm_input_afinfo
This patch is to add a new member is_ipip to struct xfrm_input_afinfo,
to allow another group family of callback functions to be registered
with is_ipip set.

This will be used for doing a callback for struct xfrm(6)_tunnel of
ipip/ipv6 tunnels in xfrm_input() by calling xfrm_rcv_cb(), which is
needed by ipip/ipv6 tunnels' support in ip(6)_vti and xfrm interface
in the next patches.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-07-09 12:50:12 +02:00
David S. Miller 1806c13dc2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.

The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-31 17:48:46 -07:00
Florian Westphal a269fbfc4e xfrm: state: remove extract_input indirection from xfrm_state_afinfo
In order to keep CONFIG_IPV6=m working, xfrm6_extract_header needs to be
duplicated.  It will be removed again in a followup change when the
remaining caller is moved to net/xfrm as well.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-05-06 09:40:08 +02:00
Xin Long afcaf61be9 xfrm: allow to accept packets with ipv6 NEXTHDR_HOP in xfrm_input
For beet mode, when it's ipv6 inner address with nexthdrs set,
the packet format might be:

    ----------------------------------------------------
    | outer  |     | dest |     |      |  ESP    | ESP |
    | IP hdr | ESP | opts.| TCP | Data | Trailer | ICV |
    ----------------------------------------------------

The nexthdr from ESP could be NEXTHDR_HOP(0), so it should
continue processing the packet when nexthdr returns 0 in
xfrm_input(). Otherwise, when ipv6 nexthdr is set, the
packet will be dropped.

I don't see any error cases that nexthdr may return 0. So
fix it by removing the check for nexthdr == 0.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-04-15 09:50:03 +02:00
Sabrina Dubroca 7b3801927e xfrm: introduce xfrm_trans_queue_net
This will be used by TCP encapsulation to write packets to the encap
socket without holding the user socket's lock. Without this reinjection,
we're already holding the lock of the user socket, and then try to lock
the encap socket as well when we enqueue the encrypted packet.

While at it, add a BUILD_BUG_ON like we usually do for skb->cb, since
it's missing for struct xfrm_trans_cb.

Co-developed-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-12-09 09:59:07 +01:00
Xiaodong Xu 4944a4b107 xfrm: release device reference for invalid state
An ESP packet could be decrypted in async mode if the input handler for
this packet returns -EINPROGRESS in xfrm_input(). At this moment the device
reference in skb is held. Later xfrm_input() will be invoked again to
resume the processing.
If the transform state is still valid it would continue to release the
device reference and there won't be a problem; however if the transform
state is not valid when async resumption happens, the packet will be
dropped while the device reference is still being held.
When the device is deleted for some reason and the reference to this
device is not properly released, the kernel will keep logging like:

unregister_netdevice: waiting for ppp2 to become free. Usage count = 1

The issue is observed when running IPsec traffic over a PPPoE device based
on a bridge interface. By terminating the PPPoE connection on the server
end for multiple times, the PPPoE device on the client side will eventually
get stuck on the above warning message.

This patch will check the async mode first and continue to release device
reference in async resumption, before it is dropped due to invalid state.

v2: Do not assign address family from outer_mode in the transform if the
state is invalid

v3: Release device reference in the error path instead of jumping to resume

Fixes: 4ce3dbe397 ("xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)")
Signed-off-by: Xiaodong Xu <stid.smth@gmail.com>
Reported-by: Bo Chen <chenborfc@163.com>
Tested-by: Bo Chen <chenborfc@163.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-11-12 08:24:38 +01:00
Florian Westphal 895b5c9f20 netfilter: drop bridge nf reset from nf_reset
commit 174e23810c
("sk_buff: drop all skb extensions on free and skb scrubbing") made napi
recycle always drop skb extensions.  The additional skb_ext_del() that is
performed via nf_reset on napi skb recycle is not needed anymore.

Most nf_reset() calls in the stack are there so queued skb won't block
'rmmod nf_conntrack' indefinitely.

This removes the skb_ext_del from nf_reset, and renames it to a more
fitting nf_reset_ct().

In a few selected places, add a call to skb_ext_reset to make sure that
no active extensions remain.

I am submitting this for "net", because we're still early in the release
cycle.  The patch applies to net-next too, but I think the rename causes
needless divergence between those trees.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-10-01 18:42:15 +02:00
Florian Westphal 1be451d993 xfrm: fix bogus WARN_ON with ipv6
net/xfrm/xfrm_input.c:378:17: warning: this statement may fall through [-Wimplicit-fallthrough=]
skb->protocol = htons(ETH_P_IPV6);

... the fallthrough then causes a bogus WARN_ON().

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 4c203b0454 ("xfrm: remove eth_proto value from xfrm_state_afinfo")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-06-12 11:01:56 +02:00
Florian Westphal 4c203b0454 xfrm: remove eth_proto value from xfrm_state_afinfo
xfrm_prepare_input needs to lookup the state afinfo backend again to fetch
the address family ethernet protocol value.

There are only two address families, so a switch statement is simpler.
While at it, use u8 for family and proto and remove the owner member --
its not used anywhere.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-06-06 08:34:50 +02:00
Florian Westphal c9500d7b7d xfrm: store xfrm_mode directly, not its address
This structure is now only 4 bytes, so its more efficient
to cache a copy rather than its address.

No significant size difference in allmodconfig vmlinux.

With non-modular kernel that has all XFRM options enabled, this
series reduces vmlinux image size by ~11kb. All xfrm_mode
indirections are gone and all modes are built-in.

before (ipsec-next master):
    text      data      bss         dec   filename
21071494   7233140 11104324    39408958   vmlinux.master

after this series:
21066448   7226772 11104324    39397544   vmlinux.patched

With allmodconfig kernel, the size increase is only 362 bytes,
even all the xfrm config options removed in this series are
modular.

before:
    text      data     bss      dec   filename
15731286   6936912 4046908 26715106   vmlinux.master

after this series:
15731492   6937068  4046908  26715468 vmlinux

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:15:28 +02:00
Florian Westphal 4c145dce26 xfrm: make xfrm modes builtin
after previous changes, xfrm_mode contains no function pointers anymore
and all modules defining such struct contain no code except an init/exit
functions to register the xfrm_mode struct with the xfrm core.

Just place the xfrm modes core and remove the modules,
the run-time xfrm_mode register/unregister functionality is removed.

Before:

    text    data     bss      dec filename
    7523     200    2364    10087 net/xfrm/xfrm_input.o
   40003     628     440    41071 net/xfrm/xfrm_state.o
15730338 6937080 4046908 26714326 vmlinux

    7389     200    2364    9953  net/xfrm/xfrm_input.o
   40574     656     440   41670  net/xfrm/xfrm_state.o
15730084 6937068 4046908 26714060 vmlinux

The xfrm*_mode_{transport,tunnel,beet} modules are gone.

v2: replace CONFIG_INET6_XFRM_MODE_* IS_ENABLED guards with CONFIG_IPV6
    ones rather than removing them.

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:15:17 +02:00
Florian Westphal 733a5fac2f xfrm: remove afinfo pointer from xfrm_mode
Adds an EXPORT_SYMBOL for afinfo_get_rcu, as it will now be called from
ipv6 in case of CONFIG_IPV6=m.

This change has virtually no effect on vmlinux size, but it reduces
afinfo size and allows followup patch to make xfrm modes const.

v2: mark if (afinfo) tests as likely (Sabrina)
    re-fetch afinfo according to inner_mode in xfrm_prepare_input().

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:15:09 +02:00
Florian Westphal b3284df1c8 xfrm: remove input2 indirection from xfrm_mode
No external dependencies on any module, place this in the core.
Increase is about 1800 byte for xfrm_input.o.

The beet helpers get added to internal header, as they can be reused
from xfrm_output.c in the next patch (kernel contains several
copies of them in the xfrm{4,6}_mode_beet.c files).

Before:
   text    data     bss     dec filename
   5578     176    2364    8118 net/xfrm/xfrm_input.o
   1180      64       0    1244 net/ipv4/xfrm4_mode_beet.o
    171      40       0     211 net/ipv4/xfrm4_mode_transport.o
   1163      40       0    1203 net/ipv4/xfrm4_mode_tunnel.o
   1083      52       0    1135 net/ipv6/xfrm6_mode_beet.o
    172      40       0     212 net/ipv6/xfrm6_mode_ro.o
    172      40       0     212 net/ipv6/xfrm6_mode_transport.o
   1056      40       0    1096 net/ipv6/xfrm6_mode_tunnel.o

After:
   text    data     bss     dec filename
   7373     200    2364    9937 net/xfrm/xfrm_input.o
    587      44       0     631 net/ipv4/xfrm4_mode_beet.o
    171      32       0     203 net/ipv4/xfrm4_mode_transport.o
    649      32       0     681 net/ipv4/xfrm4_mode_tunnel.o
    625      44       0     669 net/ipv6/xfrm6_mode_beet.o
    172      32       0     204 net/ipv6/xfrm6_mode_ro.o
    172      32       0     204 net/ipv6/xfrm6_mode_transport.o
    599      32       0     631 net/ipv6/xfrm6_mode_tunnel.o

v2: pass inner_mode to xfrm_inner_mode_encap_remove to fix
    AF_UNSPEC selector breakage (bisected by Benedict Wong)

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:14:55 +02:00
Florian Westphal c2d305e510 xfrm: remove input indirection from xfrm_mode
No need for any indirection or abstraction here, both functions
are pretty much the same and quite small, they also have no external
dependencies.

xfrm_prepare_input can then be made static.

With allmodconfig build, size increase of vmlinux is 25 byte:

Before:
   text   data     bss     dec      filename
15730207  6936924 4046908 26714039  vmlinux

After:
15730208  6936948 4046908 26714064 vmlinux

v2: Fix INET_XFRM_MODE_TRANSPORT name in is-enabled test (Sabrina Dubroca)
    change copied comment to refer to transport and network header,
    not skb->{h,nh}, which don't exist anymore. (Sabrina)
    make xfrm_prepare_input static (Eyal Birger)

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:14:21 +02:00
Florian Westphal b45714b164 xfrm: prefer family stored in xfrm_mode struct
Now that we have the family available directly in the
xfrm_mode struct, we can use that and avoid one extra dereference.

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08 09:14:12 +02:00
David S. Miller 2be09de7d6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.

Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 11:53:36 -08:00
Florian Westphal 4165079ba3 net: switch secpath to use skb extension infrastructure
Remove skb->sp and allocate secpath storage via extension
infrastructure.  This also reduces sk_buff by 8 bytes on x86_64.

Total size of allyesconfig kernel is reduced slightly, as there is
less inlined code (one conditional atomic op instead of two on
skb_clone).

No differences in throughput in following ipsec performance tests:
- transport mode with aes on 10GB link
- tunnel mode between two network namespaces with aes and null cipher

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:21:38 -08:00
Florian Westphal 2294be0f11 net: use skb_sec_path helper in more places
skb_sec_path gains 'const' qualifier to avoid
xt_policy.c: 'skb_sec_path' discards 'const' qualifier from pointer target type

same reasoning as previous conversions: Won't need to touch these
spots anymore when skb->sp is removed.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:21:37 -08:00
Florian Westphal 0ca64da128 xfrm: change secpath_set to return secpath struct, not error value
It can only return 0 (success) or -ENOMEM.
Change return value to a pointer to secpath struct.

This avoids direct access to skb->sp:

err = secpath_set(skb);
if (!err) ..
skb->sp-> ...

Becomes:
sp = secpath_set(skb)
if (!sp) ..
sp-> ..

This reduces noise in followup patch which is going to remove skb->sp.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 11:21:37 -08:00
Steffen Klassert 0152eee6fc xfrm: Fix NULL pointer dereference in xfrm_input when skb_dst_force clears the dst_entry.
Since commit 222d7dbd25 ("net: prevent dst uses after free")
skb_dst_force() might clear the dst_entry attached to the skb.
The xfrm code doesn't expect this to happen, so we crash with
a NULL pointer dereference in this case.

Fix it by checking skb_dst(skb) for NULL after skb_dst_force()
and drop the packet in case the dst_entry was cleared. We also
move the skb_dst_force() to a codepath that is not used when
the transformation was offloaded, because in this case we
don't have a dst_entry attached to the skb.

The output and forwarding path was already fixed by
commit 9e14379378 ("xfrm: Fix NULL pointer dereference when
skb_dst_force clears the dst_entry.")

Fixes: 222d7dbd25 ("net: prevent dst uses after free")
Reported-by: Jean-Philippe Menil <jpmenil@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-11-22 10:09:39 +01:00
Li RongQing f1193e9157 xfrm: use correct size to initialise sp->ovec
This place should want to initialize array, not a element,
so it should be sizeof(array) instead of sizeof(element)

but now this array only has one element, so no error in
this condition that XFRM_MAX_OFFLOAD_DEPTH is 1

Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-10-08 08:15:55 +02:00
David S. Miller ee0b6f4834 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:

====================
pull request (net): ipsec 2018-10-01

1) Validate address prefix lengths in the xfrm selector,
   otherwise we may hit undefined behaviour in the
   address matching functions if the prefix is too
   big for the given address family.

2) Fix skb leak on local message size errors.
   From Thadeu Lima de Souza Cascardo.

3) We currently reset the transport header back to the network
   header after a transport mode transformation is applied. This
   leads to an incorrect transport header when multiple transport
   mode transformations are applied. Reset the transport header
   only after all transformations are already applied to fix this.
   From Sowmini Varadhan.

4) We only support one offloaded xfrm, so reset crypto_done after
   the first transformation in xfrm_input(). Otherwise we may call
   the wrong input method for subsequent transformations.
   From Sowmini Varadhan.

5) Fix NULL pointer dereference when skb_dst_force clears the dst_entry.
   skb_dst_force does not really force a dst refcount anymore, it might
   clear it instead. xfrm code did not expect this, add a check to not
   dereference skb_dst() if it was cleared by skb_dst_force.

6) Validate xfrm template mode, otherwise we can get a stack-out-of-bounds
   read in xfrm_state_find. From Sean Tranchetti.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01 22:29:25 -07:00
Sowmini Varadhan 782710e333 xfrm: reset crypto_done when iterating over multiple input xfrms
We only support one offloaded xfrm (we do not have devices that
can handle more than one offload), so reset crypto_done in
xfrm_input() when iterating over multiple transforms in xfrm_input,
so that we can invoke the appropriate x->type->input for the
non-offloaded transforms

Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-09-04 10:27:07 +02:00
Steffen Klassert f203b76d78 xfrm: Add virtual xfrm interfaces
This patch adds support for virtual xfrm interfaces.
Packets that are routed through such an interface
are guaranteed to be IPsec transformed or dropped.
It is a generic virtual interface that ensures IPsec
transformation, no need to know what happens behind
the interface. This means that we can tunnel IPv4 and
IPv6 through the same interface and support all xfrm
modes (tunnel, transport and beet) on it.

Co-developed-by: Lorenzo Colitti <lorenzo@google.com>
Co-developed-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Benedict Wong <benedictwong@google.com>
Tested-by: Antony Antony <antony@phenome.org>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
2018-06-23 16:07:25 +02:00
Steffen Klassert 9b42c1f179 xfrm: Extend the output_mark to support input direction and masking.
We already support setting an output mark at the xfrm_state,
unfortunately this does not support the input direction and
masking the marks that will be applied to the skb. This change
adds support applying a masked value in both directions.

The existing XFRMA_OUTPUT_MARK number is reused for this purpose
and as it is now bi-directional, it is renamed to XFRMA_SET_MARK.

An additional XFRMA_SET_MARK_MASK attribute is added for setting the
mask. If the attribute mask not provided, it is set to 0xffffffff,
keeping the XFRMA_OUTPUT_MARK existing 'full mask' semantics.

Co-developed-by: Tobias Brunner <tobias@strongswan.org>
Co-developed-by: Eyal Birger <eyal.birger@gmail.com>
Co-developed-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
2018-06-23 16:06:57 +02:00
David S. Miller c0b458a946 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c,
we had some overlapping changes:

1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE -->
   MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE

2) In 'net-next' params->log_rq_size is renamed to be
   params->log_rq_mtu_frames.

3) In 'net-next' params->hard_mtu is added.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01 19:49:34 -04:00
Steffen Klassert 9a3fb9fb84 xfrm: Fix transport mode skb control buffer usage.
A recent commit introduced a new struct xfrm_trans_cb
that is used with the sk_buff control buffer. Unfortunately
it placed the structure in front of the control buffer and
overlooked that the IPv4/IPv6 control buffer is still needed
for some layer 4 protocols. As a result the IPv4/IPv6 control
buffer is overwritten with this structure. Fix this by setting
a apropriate header in front of the structure.

Fixes acf568ee85 ("xfrm: Reinject transport-mode packets ...")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-03-23 07:56:04 +01:00
Alexey Dobriyan f8c3d0dda4 xfrm: mark kmem_caches as __ro_after_init
Kmem caches aren't relocated once set up.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-02-27 10:46:01 +01:00
David S. Miller c02b3741eb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Overlapping changes all over.

The mini-qdisc bits were a little bit tricky, however.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17 00:10:42 -05:00
Herbert Xu d16b46e4fd xfrm: Use __skb_queue_tail in xfrm_trans_queue
We do not need locking in xfrm_trans_queue because it is designed
to use per-CPU buffers.  However, the original code incorrectly
used skb_queue_tail which takes the lock.  This patch switches
it to __skb_queue_tail instead.

Reported-and-tested-by: Artem Savkov <asavkov@redhat.com>
Fixes: acf568ee85 ("xfrm: Reinject transport-mode packets...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-05 09:33:14 +01:00
David S. Miller 6bb8824732 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
net/ipv6/ip6_gre.c is a case of parallel adds.

include/trace/events/tcp.h is a little bit more tricky.  The removal
of in-trace-macro ifdefs in 'net' paralleled with moving
show_tcp_state_name and friends over to include/trace/events/sock.h
in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-29 15:42:26 -05:00
Herbert Xu acf568ee85 xfrm: Reinject transport-mode packets through tasklet
This is an old bugbear of mine:

https://www.mail-archive.com/netdev@vger.kernel.org/msg03894.html

By crafting special packets, it is possible to cause recursion
in our kernel when processing transport-mode packets at levels
that are only limited by packet size.

The easiest one is with DNAT, but an even worse one is where
UDP encapsulation is used in which case you just have to insert
an UDP encapsulation header in between each level of recursion.

This patch avoids this problem by reinjecting tranport-mode packets
through a tasklet.

Fixes: b05e106698 ("[IPV4/6]: Netfilter IPsec input hooks")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-19 08:23:21 +01:00
Aviv Heller 4ce3dbe397 xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)
Code path when (encap_type < 0) does not verify the state is valid
before progressing.

This will result in a crash if, for instance, x->km.state ==
XFRM_STATE_ACQ.

Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-01 07:58:53 +01:00
Aviv Heller 9b7e14dba0 xfrm: Remove redundant state assignment in xfrm_input()
x is already initialized to the same value, above.

Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-01 07:41:48 +01:00
David S. Miller 6a17280247 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:

====================
pull request (net): ipsec 2017-11-09

1) Fix a use after free due to a reallocated skb head.
   From Florian Westphal.

2) Fix sporadic lookup failures on labeled IPSEC.
   From Florian Westphal.

3) Fix a stack out of bounds when a socket policy is applied
   to an IPv6 socket that sends IPv4 packets.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09 10:58:35 +09:00
Florian Westphal cb79a180f2 xfrm: defer daddr pointer assignment after spi parsing
syzbot reports:
BUG: KASAN: use-after-free in __xfrm_state_lookup+0x695/0x6b0
Read of size 4 at addr ffff8801d434e538 by task syzkaller647520/2991
[..]
__xfrm_state_lookup+0x695/0x6b0 net/xfrm/xfrm_state.c:833
xfrm_state_lookup+0x8a/0x160 net/xfrm/xfrm_state.c:1592
xfrm_input+0x8e5/0x22f0 net/xfrm/xfrm_input.c:302

The use-after-free is the ipv4 destination address, which points
to an skb head area that has been reallocated:
  pskb_expand_head+0x36b/0x1210 net/core/skbuff.c:1494
  __pskb_pull_tail+0x14a/0x17c0 net/core/skbuff.c:1877
  pskb_may_pull include/linux/skbuff.h:2102 [inline]
  xfrm_parse_spi+0x3d3/0x4d0 net/xfrm/xfrm_input.c:170
  xfrm_input+0xce2/0x22f0 net/xfrm/xfrm_input.c:291

so the real bug is that xfrm_parse_spi() uses pskb_may_pull, but
for now do smaller workaround that makes xfrm_input fetch daddr
after spi parsing.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-11-02 11:53:53 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Alexey Kodanev 23e9fcfef1 vti: fix NULL dereference in xfrm_input()
Can be reproduced with LTP tests:
  # icmp-uni-vti.sh -p ah -a sha256 -m tunnel -S fffffffe -k 1 -s 10

IPv4:
  RIP: 0010:xfrm_input+0x7f9/0x870
  ...
  Call Trace:
  <IRQ>
  vti_input+0xaa/0x110 [ip_vti]
  ? skb_free_head+0x21/0x40
  vti_rcv+0x33/0x40 [ip_vti]
  xfrm4_ah_rcv+0x33/0x60
  ip_local_deliver_finish+0x94/0x1e0
  ip_local_deliver+0x6f/0xe0
  ? ip_route_input_noref+0x28/0x50
  ...

  # icmp-uni-vti.sh -6 -p ah -a sha256 -m tunnel -S fffffffe -k 1 -s 10
IPv6:
  RIP: 0010:xfrm_input+0x7f9/0x870
  ...
  Call Trace:
  <IRQ>
  xfrm6_rcv_tnl+0x3c/0x40
  vti6_rcv+0xd5/0xe0 [ip6_vti]
  xfrm6_ah_rcv+0x33/0x60
  ip6_input_finish+0xee/0x460
  ip6_input+0x3f/0xb0
  ip6_rcv_finish+0x45/0xa0
  ipv6_rcv+0x34b/0x540

xfrm_input() invokes xfrm_rcv_cb() -> vti_rcv_cb(), the last callback
might call skb_scrub_packet(), which in turn can reset secpath.

Fix it by adding a check that skb->sp is not NULL.

Fixes: 7e9e9202bc ("xfrm: Clear RX SKB secpath xfrm_offload")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-09-13 10:15:24 +02:00
Yossi Kuperman 47ebcc0bb1 xfrm: Add support for network devices capable of removing the ESP trailer
In conjunction with crypto offload [1], removing the ESP trailer by
hardware can potentially improve the performance by avoiding (1) a
cache miss incurred by reading the nexthdr field and (2) the necessity
to calculate the csum value of the trailer in order to keep skb->csum
valid.

This patch introduces the changes to the xfrm stack and merely serves
as an infrastructure. Subsequent patch to mlx5 driver will put this to
a good use.

[1] https://www.mail-archive.com/netdev@vger.kernel.org/msg175733.html

Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-31 09:04:03 +02:00
Ilan Tayari 7e9e9202bc xfrm: Clear RX SKB secpath xfrm_offload
If an incoming packet undergoes XFRM crypto-offload, its secpath is
filled with xfrm_offload struct denoting offload information.

If the SKB is then forwarded to a device which supports crypto-
offload, the stack wrongfully attempts to offload it (even though
the output SA may not exist on the device) due to the leftover
secpath xo.

Clear the ingress xo by zeroizing secpath->olen just before
delivering the decapsulated packet to the network stack.

Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-02 11:00:15 +02:00
Reshetova, Elena 55eabed60a net, xfrm: convert sec_path.refcnt from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-04 22:35:18 +01:00
Linus Torvalds 8d65b08deb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Millar:
 "Here are some highlights from the 2065 networking commits that
  happened this development cycle:

   1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)

   2) Add a generic XDP driver, so that anyone can test XDP even if they
      lack a networking device whose driver has explicit XDP support
      (me).

   3) Sparc64 now has an eBPF JIT too (me)

   4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
      Starovoitov)

   5) Make netfitler network namespace teardown less expensive (Florian
      Westphal)

   6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)

   7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)

   8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)

   9) Multiqueue support in stmmac driver (Joao Pinto)

  10) Remove TCP timewait recycling, it never really could possibly work
      well in the real world and timestamp randomization really zaps any
      hint of usability this feature had (Soheil Hassas Yeganeh)

  11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
      Aleksandrov)

  12) Add socket busy poll support to epoll (Sridhar Samudrala)

  13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
      and several others)

  14) IPSEC hw offload infrastructure (Steffen Klassert)"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
  tipc: refactor function tipc_sk_recv_stream()
  tipc: refactor function tipc_sk_recvmsg()
  net: thunderx: Optimize page recycling for XDP
  net: thunderx: Support for XDP header adjustment
  net: thunderx: Add support for XDP_TX
  net: thunderx: Add support for XDP_DROP
  net: thunderx: Add basic XDP support
  net: thunderx: Cleanup receive buffer allocation
  net: thunderx: Optimize CQE_TX handling
  net: thunderx: Optimize RBDR descriptor handling
  net: thunderx: Support for page recycling
  ipx: call ipxitf_put() in ioctl error path
  net: sched: add helpers to handle extended actions
  qed*: Fix issues in the ptp filter config implementation.
  qede: Fix concurrency issue in PTP Tx path processing.
  stmmac: Add support for SIMATIC IOT2000 platform
  net: hns: fix ethtool_get_strings overflow in hns driver
  tcp: fix wraparound issue in tcp_lp
  bpf, arm64: fix jit branch offset related to ldimm64
  bpf, arm64: implement jiting of BPF_XADD
  ...
2017-05-02 16:40:27 -07:00
Sabrina Dubroca cfcf99f987 xfrm: fix GRO for !CONFIG_NETFILTER
In xfrm_input() when called from GRO, async == 0, and we end up
skipping the processing in xfrm4_transport_finish(). GRO path will
always skip the NF_HOOK, so we don't need the special-case for
!NETFILTER during GRO processing.

Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-27 12:20:19 +02:00
Steffen Klassert bcd1f8a45e xfrm: Prepare the GRO codepath for hardware offloading.
On IPsec hardware offloading, we already get a secpath with
valid state attached when the packet enters the GRO handlers.
So check for hardware offload and skip the state lookup in this
case.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14 10:07:49 +02:00
Steffen Klassert d77e38e612 xfrm: Add an IPsec hardware offloading API
This patch adds all the bits that are needed to do
IPsec hardware offload for IPsec states and ESP packets.
We add xfrmdev_ops to the net_device. xfrmdev_ops has
function pointers that are needed to manage the xfrm
states in the hardware and to do a per packet
offloading decision.

Joint work with:
Ilan Tayari <ilant@mellanox.com>
Guy Shapiro <guysh@mellanox.com>
Yossi Kuperman <yossiku@mellanox.com>

Signed-off-by: Guy Shapiro <guysh@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14 10:06:10 +02:00
Steffen Klassert 7785bba299 esp: Add a software GRO codepath
This patch adds GRO ifrastructure and callbacks for ESP on
ipv4 and ipv6.

In case the GRO layer detects an ESP packet, the
esp{4,6}_gro_receive() function does a xfrm state lookup
and calls the xfrm input layer if it finds a matching state.
The packet will be decapsulated and reinjected it into layer 2.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15 11:04:11 +01:00
Steffen Klassert 54ef207ac8 xfrm: Extend the sec_path for IPsec offloading
We need to keep per packet offloading informations across
the layers. So we extend the sec_path to carry these for
the input and output offload codepath.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15 11:04:10 +01:00
Steffen Klassert 1e29537034 xfrm: Export xfrm_parse_spi.
We need it in the ESP offload handlers, so export it.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15 09:39:49 +01:00
Steffen Klassert b0fcee825c xfrm: Add a secpath_set helper.
Add a new helper to set the secpath to the skb.
This avoids code duplication, as this is used
in multiple places.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-15 09:39:24 +01:00
Florian Westphal 960fdfdeb9 xfrm: input: constify xfrm_input_afinfo
Nothing writes to these structures (the module owner was not used).

While at it, size xfrm_input_afinfo[] by the highest existing xfrm family
(INET6), not AF_MAX.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-02-09 10:22:17 +01:00