Граф коммитов

14 Коммитов

Автор SHA1 Сообщение Дата
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Thomas Gleixner 7433c5cf4f m32r: Use generic init_task
Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Link: http://lkml.kernel.org/r/20120503085034.756332161@linutronix.de
2012-05-05 13:00:23 +02:00
Sam Ravnborg 80c00ba942 kbuild: allow assignment to {A,C}FLAGS_KERNEL on the command line
It is now possible to assign options to AS and CC
on the command line - which is only used for built-in code.

{A,C}FLAGS_KERNEL was used both in the top-level Makefile
in the arch makefiles, thus users had no way to specify
additional options to AS, CC without overriding
the original value.

Introduce a new set of variables KBUILD_{A,C}FLAGS_KERNEL
that is used by arch specific files and free up
{A,C}FLAGS_KERNEL so they can be assigned on
the command line.

All arch Makefiles that used the old variables has been updated.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03 14:09:45 +02:00
Sam Ravnborg 6588169d51 kbuild: allow assignment to {A,C,LD}FLAGS_MODULE on the command line
It is now possible to assign options to AS, CC and LD
on the command line - which is only used when building modules.

{A,C,LD}FLAGS_MODULE was all used both in the top-level Makefile
in the arch makefiles, thus users had no way to specify
additional options to AS, CC, LD when building modules
without overriding the original value.

Introduce a new set of variables KBUILD_{A,C,LD}FLAGS_MODULE
that is used by arch specific files and free up
{A,C,LD}FLAGS_MODULE so they can be assigned on
the command line.

All arch Makefiles that used the old variables has been updated.

Note: Previously we had a MODFLAGS variable for both
AS and CC. But in favour of consistency this was dropped.
So in some cases arch Makefile has one assignmnet replaced by
two assignmnets.

Note2: MODFLAGS was not documented and is dropped
without any notice. I do not expect much/any breakage
from this.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [avr32]
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03 14:09:45 +02:00
Adrian Bunk 7622b46451 m32r: use KBUILD_DEFCONFIG
With using KBUILD_DEFCONFIG we don't have to ship a second copy of
m32700ut.smp_defconfig

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Hirokazu Takata <takata@linux-m32r.org>
2008-04-29 14:46:00 +09:00
Sam Ravnborg 222d394d30 kbuild: enable 'make AFLAGS=...' to add additional options to AS
The variable AFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of AFLAGS with KBUILD_AFLAGS all over
the tree.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-15 21:59:31 +02:00
Sam Ravnborg a0f97e06a4 kbuild: enable 'make CFLAGS=...' to add additional options to CC
The variable CFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of CFLAGS with KBUILD_CFLAGS all over the
tree and enabling one to use:
make CFLAGS=...
to specify additional gcc commandline options.

One usecase is when trying to find gcc bugs but other
use cases has been requested too.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k

Test was simple to do a defconfig build, apply the patch and check
that nothing got rebuild.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-14 22:21:35 +02:00
Hirokazu Takata 3264f976d3 m32r: Rearrange platform-dependent codes
Rearrange platform-dependent codes from arch/m32r/kernel/*.c
to arch/m32r/platforms/{platform}/.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03 11:30:18 +09:00
Hirokazu Takata 3d60f84934 [PATCH] m32r: fix kernel entry address of vmlinux
This patch fixes the kernel entry point address of vmlinux.

The m32r kernel entry address is 0x08002000 (physical).
But, so far, the ENTRY point written in vmlinux.lds.S was not point
the correct kernel entry address.

(before fix)
    $ objdump -x vmlinux
    vmlinux:     file format elf32-m32r-linux
    vmlinux
    architecture: m32r2, flags 0x00000112:
    EXEC_P, HAS_SYMS, D_PAGED
    start address 0x88002090	/* NG */
        :
    Sections:
    Idx Name          Size      VMA       LMA       File off  Algn
      0 .empty_zero_page 00001000  88001000  88001000  00001000  2**12
                      CONTENTS, ALLOC, LOAD, DATA
      1 .boot         0000008c  88002000  88002000  00002000  2**2
                      CONTENTS, ALLOC, LOAD, READONLY, CODE
      2 .text         001ab694  88002090  88002090  00002090  2**4
                      CONTENTS, ALLOC, LOAD, READONLY, CODE
        :

(after fix)
    $ objdump -x vmlinux
    vmlinux:     file format elf32-m32r-linux
    vmlinux
    architecture: m32r2, flags 0x00000112:
    EXEC_P, HAS_SYMS, D_PAGED
    start address 0x08002000	/* OK */
        :

This fix also remedies the following GDB error message (of gdb-6.4 or after)
at the first operation of kernel debugging:
"Previous frame identical to this frame (corrupt stack?)".

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:20 -08:00
Linus Torvalds 2e1ca21d46 Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild
* master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild: (46 commits)
  kbuild: remove obsoleted scripts/reference_* files
  kbuild: fix make help & make *pkg
  kconfig: fix time ordering of writes to .kconfig.d and include/linux/autoconf.h
  Kconfig: remove the CONFIG_CC_ALIGN_* options
  kbuild: add -fverbose-asm to i386 Makefile
  kbuild: clean-up genksyms
  kbuild: Lindent genksyms.c
  kbuild: fix genksyms build error
  kbuild: in makefile.txt note that Makefile is preferred name for kbuild files
  kbuild: replace PHONY with FORCE
  kbuild: Fix bug in crc symbol generating of kernel and modules
  kbuild: change kbuild to not rely on incorrect GNU make behavior
  kbuild: when warning symbols exported twice now tell user this is the problem
  kbuild: fix make dir/file.xx when asm symlink is missing
  kbuild: in the section mismatch check try harder to find symbols
  kbuild: fix section mismatch check for unwind on IA64
  kbuild: kill false positives from section mismatch warnings for powerpc
  kbuild: kill trailing whitespace in modpost & friends
  kbuild: small update of allnoconfig description
  kbuild: make namespace.pl CROSS_COMPILE happy
  ...

Trivial conflict in arch/ppc/boot/Makefile manually fixed up
2006-03-25 08:48:48 -08:00
Paul Smith 4f1933620f kbuild: change kbuild to not rely on incorrect GNU make behavior
The kbuild system takes advantage of an incorrect behavior in GNU make.
Once this behavior is fixed, all files in the kernel rebuild every time,
even if nothing has changed.  This patch ensures kbuild works with both
the incorrect and correct behaviors of GNU make.

For more details on the incorrect behavior, see:

http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html

Changes in this patch:
  - Keep all targets that are to be marked .PHONY in a variable, PHONY.
  - Add .PHONY: $(PHONY) to mark them properly.
  - Remove any $(PHONY) files from the $? list when determining whether
    targets are up-to-date or not.

Signed-off-by: Paul Smith <psmith@gnu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-06 00:09:51 +01:00
Hirokazu Takata cde05cf214 [PATCH] m32r: enable asm code optimization
Add -O2 option to AFLAGS to enable asm code optimization for m32r.

On m32r gas, "-m32r2 -O" option enables assembler's parallel code
generation optimization for M32R2 ISA as a default.  So, "-no-parallel"
option is required explicitly for a cpu core with single instuction
issuing, for example, VDEC2.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-24 14:31:36 -08:00
Al Viro c74dbac714 [PATCH] m32r: set CHECKFLAGS properly
We do _not_ need "sparse" in sparse arguments ;-)

What we do need is __BIG_ENDIAN__; right now unconditional, when m32r
starts using CPU_LITTLE_ENDIAN, we'll need to adjust.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26 18:29:50 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00