Unfortunately I forgot this during the merge window, but the
patch seems small enough to go in as a fix. The userspace API
bug that was the reason for disabling it has long been fixed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the netlink skb is exhausted split_start is left set. In the
subsequent retry, with a larger buffer, the dump is continued from the
failing point instead of from the beginning.
This was causing my rt28xx based USB dongle to now show up when
running "iw list" with an old iw version without split dump support.
Cc: stable@vger.kernel.org
Fixes: 3713b4e364 ("nl80211: allow splitting wiphy information in dumps")
Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
[avoid the entire workaround when state->split is set]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_start_roc_work() might add a new roc
to existing roc, and tell cfg80211 it has already
started.
However, this might happen before the roc cookie
was set, resulting in REMAIN_ON_CHANNEL (started)
event with null cookie. Consequently, it can make
wpa_supplicant go out of sync.
Fix it by setting the roc cookie earlier.
Cc: stable@vger.kernel.org
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a reject module for NFPROTO_INET. It does nothing but dispatch
to the AF-specific modules based on the hook family.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently the nft_reject module depends on symbols from ipv6. This is
wrong since no generic module should force IPv6 support to be loaded.
Split up the module into AF-specific and a generic part.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jesse Gross says:
====================
Open vSwitch
A handful of bug fixes for net/3.14. High level fixes are:
* Regressions introduced by the zerocopy changes, particularly with
old userspaces.
* A few bugs lingering from the introduction of megaflows.
* Overly zealous error checking that is now being triggered frequently
in common cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent patch to fix receive side flow control
(11b57f90257c1d6a91cee720151b69e0c2020cf6: xen-netback: stop vif thread
spinning if frontend is unresponsive) solved the spinning thread problem,
however caused an another one. The receive side can stall, if:
- [THREAD] xenvif_rx_action sets rx_queue_stopped to true
- [INTERRUPT] interrupt happens, and sets rx_event to true
- [THREAD] then xenvif_kthread sets rx_event to false
- [THREAD] rx_work_todo doesn't return true anymore
Also, if interrupt sent but there is still no room in the ring, it take quite a
long time until xenvif_rx_action realize it. This patch ditch that two variable,
and rework rx_work_todo. If the thread finds it can't fit more skb's into the
ring, it saves the last slot estimation into rx_last_skb_slots, otherwise it's
kept as 0. Then rx_work_todo will check if:
- there is something to send to the ring (like before)
- there is space for the topmost packet in the queue
I think that's more natural and optimal thing to test than two bool which are
set somewhere else.
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the reject module, we need to add AF-specific implementations to
get rid of incorrect module dependencies. Try to load an AF-specific
module first and fall back to generic modules.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The key was missing in the list of valid keys, add it.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit c9c8e48597 (netfilter: nf_tables: dump sets in all existing families)
changed nft_ctx_init_from_setattr() to only look up the address family if it
is not NFPROTO_UNSPEC. However if it is NFPROTO_UNSPEC and a table attribute
is given, nftables_afinfo_lookup() will dereference the NULL afi pointer.
Fix by checking for non-NULL afi and also move a check added by that commit
to the proper position.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The map that is used to allocate anonymous sets is indeed
BITS_PER_BYTE * PAGE_SIZE long.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
With this patch, the conntrack refcount is initially set to zero and
it is bumped once it is added to any of the list, so we fulfill
Eric's golden rule which is that all released objects always have a
refcount that equals zero.
Andrey Vagin reports that nf_conntrack_free can't be called for a
conntrack with non-zero ref-counter, because it can race with
nf_conntrack_find_get().
A conntrack slab is created with SLAB_DESTROY_BY_RCU. Non-zero
ref-counter says that this conntrack is used. So when we release
a conntrack with non-zero counter, we break this assumption.
CPU1 CPU2
____nf_conntrack_find()
nf_ct_put()
destroy_conntrack()
...
init_conntrack
__nf_conntrack_alloc (set use = 1)
atomic_inc_not_zero(&ct->use) (use = 2)
if (!l4proto->new(ct, skb, dataoff, timeouts))
nf_conntrack_free(ct); (use = 2 !!!)
...
__nf_conntrack_alloc (set use = 1)
if (!nf_ct_key_equal(h, tuple, zone))
nf_ct_put(ct); (use = 0)
destroy_conntrack()
/* continue to work with CT */
After applying the path "[PATCH] netfilter: nf_conntrack: fix RCU
race in nf_conntrack_find_get" another bug was triggered in
destroy_conntrack():
<4>[67096.759334] ------------[ cut here ]------------
<2>[67096.759353] kernel BUG at net/netfilter/nf_conntrack_core.c:211!
...
<4>[67096.759837] Pid: 498649, comm: atdd veid: 666 Tainted: G C --------------- 2.6.32-042stab084.18 #1 042stab084_18 /DQ45CB
<4>[67096.759932] RIP: 0010:[<ffffffffa03d99ac>] [<ffffffffa03d99ac>] destroy_conntrack+0x15c/0x190 [nf_conntrack]
<4>[67096.760255] Call Trace:
<4>[67096.760255] [<ffffffff814844a7>] nf_conntrack_destroy+0x17/0x30
<4>[67096.760255] [<ffffffffa03d9bb5>] nf_conntrack_find_get+0x85/0x130 [nf_conntrack]
<4>[67096.760255] [<ffffffffa03d9fb2>] nf_conntrack_in+0x352/0xb60 [nf_conntrack]
<4>[67096.760255] [<ffffffffa048c771>] ipv4_conntrack_local+0x51/0x60 [nf_conntrack_ipv4]
<4>[67096.760255] [<ffffffff81484419>] nf_iterate+0x69/0xb0
<4>[67096.760255] [<ffffffff814b5b00>] ? dst_output+0x0/0x20
<4>[67096.760255] [<ffffffff814845d4>] nf_hook_slow+0x74/0x110
<4>[67096.760255] [<ffffffff814b5b00>] ? dst_output+0x0/0x20
<4>[67096.760255] [<ffffffff814b66d5>] raw_sendmsg+0x775/0x910
<4>[67096.760255] [<ffffffff8104c5a8>] ? flush_tlb_others_ipi+0x128/0x130
<4>[67096.760255] [<ffffffff8100bc4e>] ? apic_timer_interrupt+0xe/0x20
<4>[67096.760255] [<ffffffff8100bc4e>] ? apic_timer_interrupt+0xe/0x20
<4>[67096.760255] [<ffffffff814c136a>] inet_sendmsg+0x4a/0xb0
<4>[67096.760255] [<ffffffff81444e93>] ? sock_sendmsg+0x13/0x140
<4>[67096.760255] [<ffffffff81444f97>] sock_sendmsg+0x117/0x140
<4>[67096.760255] [<ffffffff8102e299>] ? native_smp_send_reschedule+0x49/0x60
<4>[67096.760255] [<ffffffff81519beb>] ? _spin_unlock_bh+0x1b/0x20
<4>[67096.760255] [<ffffffff8109d930>] ? autoremove_wake_function+0x0/0x40
<4>[67096.760255] [<ffffffff814960f0>] ? do_ip_setsockopt+0x90/0xd80
<4>[67096.760255] [<ffffffff8100bc4e>] ? apic_timer_interrupt+0xe/0x20
<4>[67096.760255] [<ffffffff8100bc4e>] ? apic_timer_interrupt+0xe/0x20
<4>[67096.760255] [<ffffffff814457c9>] sys_sendto+0x139/0x190
<4>[67096.760255] [<ffffffff810efa77>] ? audit_syscall_entry+0x1d7/0x200
<4>[67096.760255] [<ffffffff810ef7c5>] ? __audit_syscall_exit+0x265/0x290
<4>[67096.760255] [<ffffffff81474daf>] compat_sys_socketcall+0x13f/0x210
<4>[67096.760255] [<ffffffff8104dea3>] ia32_sysret+0x0/0x5
I have reused the original title for the RFC patch that Andrey posted and
most of the original patch description.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Andrew Vagin <avagin@parallels.com>
Cc: Florian Westphal <fw@strlen.de>
Reported-by: Andrew Vagin <avagin@parallels.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Andrew Vagin <avagin@parallels.com>
Lets look at destroy_conntrack:
hlist_nulls_del_rcu(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode);
...
nf_conntrack_free(ct)
kmem_cache_free(net->ct.nf_conntrack_cachep, ct);
net->ct.nf_conntrack_cachep is created with SLAB_DESTROY_BY_RCU.
The hash is protected by rcu, so readers look up conntracks without
locks.
A conntrack is removed from the hash, but in this moment a few readers
still can use the conntrack. Then this conntrack is released and another
thread creates conntrack with the same address and the equal tuple.
After this a reader starts to validate the conntrack:
* It's not dying, because a new conntrack was created
* nf_ct_tuple_equal() returns true.
But this conntrack is not initialized yet, so it can not be used by two
threads concurrently. In this case BUG_ON may be triggered from
nf_nat_setup_info().
Florian Westphal suggested to check the confirm bit too. I think it's
right.
task 1 task 2 task 3
nf_conntrack_find_get
____nf_conntrack_find
destroy_conntrack
hlist_nulls_del_rcu
nf_conntrack_free
kmem_cache_free
__nf_conntrack_alloc
kmem_cache_alloc
memset(&ct->tuplehash[IP_CT_DIR_MAX],
if (nf_ct_is_dying(ct))
if (!nf_ct_tuple_equal()
I'm not sure, that I have ever seen this race condition in a real life.
Currently we are investigating a bug, which is reproduced on a few nodes.
In our case one conntrack is initialized from a few tasks concurrently,
we don't have any other explanation for this.
<2>[46267.083061] kernel BUG at net/ipv4/netfilter/nf_nat_core.c:322!
...
<4>[46267.083951] RIP: 0010:[<ffffffffa01e00a4>] [<ffffffffa01e00a4>] nf_nat_setup_info+0x564/0x590 [nf_nat]
...
<4>[46267.085549] Call Trace:
<4>[46267.085622] [<ffffffffa023421b>] alloc_null_binding+0x5b/0xa0 [iptable_nat]
<4>[46267.085697] [<ffffffffa02342bc>] nf_nat_rule_find+0x5c/0x80 [iptable_nat]
<4>[46267.085770] [<ffffffffa0234521>] nf_nat_fn+0x111/0x260 [iptable_nat]
<4>[46267.085843] [<ffffffffa0234798>] nf_nat_out+0x48/0xd0 [iptable_nat]
<4>[46267.085919] [<ffffffff814841b9>] nf_iterate+0x69/0xb0
<4>[46267.085991] [<ffffffff81494e70>] ? ip_finish_output+0x0/0x2f0
<4>[46267.086063] [<ffffffff81484374>] nf_hook_slow+0x74/0x110
<4>[46267.086133] [<ffffffff81494e70>] ? ip_finish_output+0x0/0x2f0
<4>[46267.086207] [<ffffffff814b5890>] ? dst_output+0x0/0x20
<4>[46267.086277] [<ffffffff81495204>] ip_output+0xa4/0xc0
<4>[46267.086346] [<ffffffff814b65a4>] raw_sendmsg+0x8b4/0x910
<4>[46267.086419] [<ffffffff814c10fa>] inet_sendmsg+0x4a/0xb0
<4>[46267.086491] [<ffffffff814459aa>] ? sock_update_classid+0x3a/0x50
<4>[46267.086562] [<ffffffff81444d67>] sock_sendmsg+0x117/0x140
<4>[46267.086638] [<ffffffff8151997b>] ? _spin_unlock_bh+0x1b/0x20
<4>[46267.086712] [<ffffffff8109d370>] ? autoremove_wake_function+0x0/0x40
<4>[46267.086785] [<ffffffff81495e80>] ? do_ip_setsockopt+0x90/0xd80
<4>[46267.086858] [<ffffffff8100be0e>] ? call_function_interrupt+0xe/0x20
<4>[46267.086936] [<ffffffff8118cb10>] ? ub_slab_ptr+0x20/0x90
<4>[46267.087006] [<ffffffff8118cb10>] ? ub_slab_ptr+0x20/0x90
<4>[46267.087081] [<ffffffff8118f2e8>] ? kmem_cache_alloc+0xd8/0x1e0
<4>[46267.087151] [<ffffffff81445599>] sys_sendto+0x139/0x190
<4>[46267.087229] [<ffffffff81448c0d>] ? sock_setsockopt+0x16d/0x6f0
<4>[46267.087303] [<ffffffff810efa47>] ? audit_syscall_entry+0x1d7/0x200
<4>[46267.087378] [<ffffffff810ef795>] ? __audit_syscall_exit+0x265/0x290
<4>[46267.087454] [<ffffffff81474885>] ? compat_sys_setsockopt+0x75/0x210
<4>[46267.087531] [<ffffffff81474b5f>] compat_sys_socketcall+0x13f/0x210
<4>[46267.087607] [<ffffffff8104dea3>] ia32_sysret+0x0/0x5
<4>[46267.087676] Code: 91 20 e2 01 75 29 48 89 de 4c 89 f7 e8 56 fa ff ff 85 c0 0f 84 68 fc ff ff 0f b6 4d c6 41 8b 45 00 e9 4d fb ff ff e8 7c 19 e9 e0 <0f> 0b eb fe f6 05 17 91 20 e2 80 74 ce 80 3d 5f 2e 00 00 00 74
<1>[46267.088023] RIP [<ffffffffa01e00a4>] nf_nat_setup_info+0x564/0x590
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The following commands trigger an oops:
# nft -i
nft> add table filter
nft> add chain filter input { type filter hook input priority 0; }
nft> add chain filter test
nft> add rule filter input jump test
nft> delete chain filter test
We need to check the chain use counter before allowing destruction since
we might have references from sets or jump rules.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=69341
Reported-by: Matthew Ife <deleriux1@gmail.com>
Tested-by: Matthew Ife <deleriux1@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We want to make sure that the information that we get from the kernel can
be reinjected without troubles. The kernel shouldn't return an attribute
that is not required, or even prohibited.
Dumping unconditionally NFTA_CT_DIRECTION could lead an application in
userspace to interpret that the attribute was originally set, while it
was not.
Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
With subfacets, we'd expect megaflow updates message to carry
the original micro flow. If not, EINVAL is returned and kernel
logs an error message. Now that the user space subfacet layer is
removed, it is expected that flow updates can arrive with a
micro flow other than the original. Change the return code to
EEXIST and remove the kernel error log message.
Reported-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
ovs_flow_free() is not called under ovs-lock during packet
execute path (ovs_packet_cmd_execute()). Since packet execute
does not touch flow->mask, there is no need to take that
lock either. So move assert in case where flow->mask is checked.
Found by code inspection.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
commit 43d4be9cb5 (openvswitch: Allow user space
to announce ability to accept unaligned Netlink messages) introduced
OVS_DP_ATTR_USER_FEATURES netlink attribute in datapath responses,
but the attribute size was not taken into account in ovs_dp_cmd_msg_size().
Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Both mega flow mask's reference counter and per flow table mask list
should only be accessed when holding ovs_mutex() lock. However
this is not true with ovs_flow_table_flush(). The patch fixes this bug.
Reported-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
While the zerocopy method is correctly omitted if user space
does not support unaligned Netlink messages. The attribute is
still not padded correctly as skb_zerocopy() will not ensure
padding and the attribute size is no longer pre calculated
though nla_reserve() which ensured padding previously.
This patch applies appropriate padding if a linear data copy
was performed in skb_zerocopy().
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Backend drivers shouldn't transistion to CLOSED unless the frontend is
CLOSED. If a backend does transition to CLOSED too soon then the
frontend may not see the CLOSING state and will not properly shutdown.
So, treat an unexpected backend CLOSED state the same as CLOSING.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When configuring GRE tunnel using OVS, tcp stream is distributed over
all RSS queues which may cause TCP reordering. It happens since OVS
uses L2GRE protocol when kernel gre uses IPGRE.
Patch defaults gre tunnel to L2GRE which allows proper RSS for L2GRE
packets and (implicitly) disables RSS for IPGRE traffic.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This device was mentioned in an OpenWRT forum. Seems to have a "standard"
Sierra Wireless ifnumber to function layout:
0: qcdm
2: nmea
3: modem
8: qmi
9: storage
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the trigger/event is hardcoded to 0, this patch adds
a new command line argument -i to select an arbitrary trigger/
event.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MII management bus clock is derived from the MAC clock by dividing it by
MIIMODER register CLKDIV field value. This value may need to be set up
in case it is undefined or its default value is too high (and
communication with PHY is too slow) or too low (and communication with
PHY is impossible). The value of CLKDIV is not specified directly, but
is derived from the MAC clock for the default MII management bus frequency
of 2.5MHz. The MAC clock may be specified in the platform data, or in
the 'clocks' device tree attribute.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
OpenCores 10/100 Mbps MAC does not support speeds above 100 Mbps, but does
not disable advertisement when PHY supports them. This results in
non-functioning network when the MAC is connected to a gigabit PHY connected
to a gigabit switch.
The fix is to disable gigabit speed advertisement on attached PHY
unconditionally.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a Gigabit PHY device is connected to a 10/100Mbits capable Ethernet
MAC, the driver will restrict the phydev->supported modes to mask off
Gigabit. If the Gigabit PHY comes out of reset with the Gigabit features
set by default in MII_CTRL1000, it will keep advertising these feature,
so by the time we call genphy_config_advert(), the condition on
phydev->supported having the Gigabit features on is false, and we do not
update MII_CTRL1000 with updated values, and we keep advertising Gigabit
features, eventually configuring the PHY for Gigabit whilst the Ethernet
MAC does not support that.
This patches fixes the problem by ensuring that the Gigabit feature bits
are always cleared in MII_CTRL1000, if the PHY happens to be a Gigabit
PHY, and then, if Gigabit features are supported, setting those and
updating MII_CTRL1000 accordingly.
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The trigger and events functionality can be useful even if packet
timestamping is not used, but the required PTP clock is only enabled
when packet timestamping is started. This patch moves the clock enable
to when the interface is configured.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the external timestamping code is hardcoded to use the
rising edge even though the hardware has configurable event edge
detection. This patch changes the code to use falling edge detection
if PTP_FALLING_EDGE is set in the user supplied flags.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set the SKBTX_IN_PROGRESS bit in tx_flags dp83640_txtstamp when doing
tx timestamps as per Documentation/networking/timestamping.txt.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RCU writer side should use rcu_dereference_protected() and not
rcu_dereference(), fix that. This also removes the "suspicious RCU usage"
warning seen when running with CONFIG_PROVE_RCU.
Also, don't use rcu_assign_pointer/rcu_dereference for pointers
which are invisible beyond the udp offload code.
Fixes: b582ef0 ('net: Add GRO support for UDP encapsulating protocols')
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ding Tianhong says:
====================
bonding: Fix some issues for fail_over_mac
The parameter fail_over_mac only affect active-backup mode, if it was
set to active or follow and works with other modes, just like RR or XOR
mode, the bonding could not set all slaves to the master's address, it
will cause the slave could not work well with master.
v1->v2: According Jay's suggestion, that we should permit setting an option
at any time, but only have it take effect in active-backup mode, so
I add mode checking together with fail_over_mac during enslavement and
rebuild the patches.
v2->v3: The correct way to fix the problem is that we should not add restrictions when
setting options, just need to modify the bond enslave and removal processing
to check the mode in addition to fail_over_mac when setting a slave's MAC during
enslavement. The change active slave processing already only calls the fail_over_mac
function when in active-backup mode.
Remove the cleanup patch because the net-next is frozen now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
The fail_over_mac could be set to active or follow in any time for all modes,
so if the fail_over_mac is not none and the current mode is not active-backup,
the bond_set_mac_address() could not change the master and slave's MAC address.
In bond_set_mac_address(), the fail_over_mac should only affect AB mode, so modify
to check the mode in addition to fail_over_mac when setting bond's MAC address.
Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to bonding.txt, the fail_over_ma should only affect active-backup mode,
but I found that the fail_over_mac could be set to active or follow in all
modes, this will cause new slave could not be set to bond's MAC address at
enslave processing and restore its own MAC address at removal processing.
The correct way to fix the problem is that we should not add restrictions when
setting options, just need to modify the bond enslave and removal processing
to check the mode in addition to fail_over_mac when setting a slave's MAC during
enslavement. The change active slave processing already only calls the fail_over_mac
function when in active-backup mode.
Thanks for Jay's suggestion.
The patch also modify the pr_warning() to pr_warn().
Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit, "ath9k_hw: Fix incorrect Tx control power in AR9003 template"
fixed the incorrect values in the eeprom templates, but if
boards have already been calibrated with incorrect values,
they would still be using the wrong TX power. Fix this by assigning
a default value in such cases.
Cc: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Even though we make sure PowerSave is not enabled by default
by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init,
PS could be enabled by userspace based on various factors
like battery usage etc. Since PS in ath9k is just broken
and has been untested for years, remove support for it, but
allow a user to explicitly enable it using a module parameter.
Cc: stable@vger.kernel.org
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
mac80211 ->sta_rc_update() callback must be atomic. Since we have to
take mutex and do other operations that can sleep when sending fimrware
commands to device, the only option to satisfy atomicity requirement of
->sta_rc_update(), that I can see, is introduce work_struct and defer
uploading new rates to that work.
Tested-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Raw id and FW id should be switched.
Tested-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Cc: stable@vger.kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
It is a copy/paste of patch provided by Sujith for ath9k.
"Even though we make sure PowerSave is not enabled by default
by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init,
PS could be enabled by userspace based on various factors
like battery usage etc. Since PS in ath9k is just broken
and has been untested for years, remove support for it, but
allow a user to explicitly enable it using a module parameter."
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
It is know that PS cause issues on that old devices, disable it by
default.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
We have disabled it currently on other buses. PS can cause some issues,
not necessarily with our driver but on AP, that are not easy to debug.
Since behaviour differs on rt2800usb and rt2800pci, user usually blame
for malfunction rt2800usb driver, whereas issue is on AP side.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
sta_rc_update() callback must be atomic, hence we can not take mutexes
or do other operations, which can sleep in ath9k_htc_sta_rc_update().
I think we can just return from ath9k_htc_sta_rc_update(), if it is
called without IEEE80211_RC_SUPP_RATES_CHANGED bit. That will help
with scheduling while atomic bug for most cases (except mesh and IBSS
modes).
For mesh and IBSS I do not see other solution like creating additional
workqueue, because sending firmware command require us to sleep, but
this can be done in additional patch.
Patch partially fixes bug:
https://bugzilla.redhat.com/show_bug.cgi?id=990955
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
If a fwmark is passed to ip_vs_conn_new(), it is passed in
vaddr, not daddr. Therefore we should set AF to AF_UNSPEC in
vaddr assignment (like we do in ip_vs_ct_in_get()), otherwise we
may copy only first 4 bytes of an IPv6 address into cp->daddr.
Signed-off-by: Bogdano Arendartchuk <barendartchuk@suse.com>
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Setting rt variable to NULL at the beginning of ip_tunnel_xmit()
missed possible use of this variable as a scratch value.
Also fixes a possible dst leak in tunnel_dst_check() :
If we had to call tunnel_dst_reset(), we forgot to
release the reference on dst.
Merges tunnel_dst_get()/tunnel_dst_check() into
a single tunnel_rtable_get() function for clarity.
Many thanks to Tommi for his report and tests.
Fixes: 7d442fab0a ("ipv4: Cache dst in tunnels")
Reported-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Tommi Rantala <tt.rantala@gmail.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver wasn't reading the NVM properly. While this
didn't lead to any issue until now, it seems that there
is an old version of the NVM in the wild.
In this version, the A band channels appear to be valid
but the SKU capabilities (another field of the NVM) says
that A band isn't supported at all.
With this specific version of the NVM, the driver would
think that A band is supported while the HW / firmware
don't. This leads to asserts.
Cc: <stable@vger.kernel.org> [3.10+]
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Not doing so will let BT kill our probe requests leading to
failures in scan.
Cc: <stable@vger.kernel.org> [3.10+]
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Johannes Berg
Pontus Fuchs
Eliad Peller
Patrick McHardy
David S. Miller
Zoltan Kiss
Pablo Neira Ayuso
Alexey Dobriyan
Andrey Vagin
Arturo Borrero
Andy Zhou
Pravin B Shelar
Daniele Di Proietto
Thomas Graf
David Vrabel
Dmitry Kravkov
Bjørn Mork
Fernando Luis Vazquez Cao
Stefan Sørensen
Max Filippov
Florian Fainelli
Shlomo Pongratz
dingtianhong
Sujith Manoharan
Stanislaw Gruszka
Oleksij Rempel
John W. Linville
Michal Kubecek
Eric Dumazet
Emmanuel Grumbach