WSL2-Linux-Kernel

Граф коммитов

Автор	SHA1	Сообщение	Дата
Rob Herring	4da722ca19	dt-bindings: Remove "status" from examples Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.=.' Documentation/devicetree/ \| xargs sed -i -E '/\sstatus.=."(disabled\|ok\|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>	2017-09-05 10:03:06 -05:00
Geert Uytterhoeven	a545f5d859	ASoC: davinci-mcbsp: DT fix s/interrupts-names/interrupt-names/ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>	2016-10-24 17:48:12 +01:00
Petr Kulhavy	22225835e2	ASoC: davinci-mcbsp: add binding for McBSP Add devicetree binding for the TI DA850/OMAP-L138/AM18xx MultiChannel Buffered Serial Port (McBSP) The optional register range "dat" is not implemented at the moment. The current driver supports only DMA into RX/TX registers but no FIFO. Once the FIFO is implemented in the driver the "dat" range will be used. Signed-off-by: Petr Kulhavy <petr@barix.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>	2016-04-18 17:32:16 +01:00

Автор

SHA1

Сообщение

Дата

Rob Herring

4da722ca19

dt-bindings: Remove "status" from examples

Pretty much any node can have a status property, so it doesn't need to
be in examples.

Converted with the following command and removed examples with SoC and
board specific splits:

git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d'

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>

2017-09-05 10:03:06 -05:00

Geert Uytterhoeven

a545f5d859

ASoC: davinci-mcbsp: DT fix s/interrupts-names/interrupt-names/

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

2016-10-24 17:48:12 +01:00

Petr Kulhavy

22225835e2

ASoC: davinci-mcbsp: add binding for McBSP

Add devicetree binding for the TI DA850/OMAP-L138/AM18xx
MultiChannel Buffered Serial Port (McBSP)

The optional register range "dat" is not implemented at the moment.
The current driver supports only DMA into RX/TX registers but no FIFO.
Once the FIFO is implemented in the driver the "dat" range will be used.

Signed-off-by: Petr Kulhavy <petr@barix.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

2016-04-18 17:32:16 +01:00

3 Коммитов