This commit adds expedited grace-period functionality to RCU's polled
grace-period API, adding start_poll_synchronize_rcu_expedited() and
cond_synchronize_rcu_expedited(), which are similar to the existing
start_poll_synchronize_rcu() and cond_synchronize_rcu() functions,
respectively.
Note that although start_poll_synchronize_rcu_expedited() can be invoked
very early, the resulting expedited grace periods are not guaranteed
to start until after workqueues are fully initialized. On the other
hand, both synchronize_rcu() and synchronize_rcu_expedited() can also
be invoked very early, and the resulting grace periods will be taken
into account as they occur.
[ paulmck: Apply feedback from Neeraj Upadhyay. ]
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, this code could splat:
oldstate = get_state_synchronize_rcu();
synchronize_rcu_expedited();
WARN_ON_ONCE(!poll_state_synchronize_rcu(oldstate));
This situation is counter-intuitive and user-unfriendly. After all, there
really was a perfectly valid full grace period right after the call to
get_state_synchronize_rcu(), so why shouldn't poll_state_synchronize_rcu()
know about it?
This commit therefore makes the polled grace-period API aware of expedited
grace periods in addition to the normal grace periods that it is already
aware of. With this change, the above code is guaranteed not to splat.
Please note that the above code can still splat due to counter wrap on the
one hand and situations involving partially overlapping normal/expedited
grace periods on the other. On 64-bit systems, the second is of course
much more likely than the first. It is possible to modify this approach
to prevent overlapping grace periods from causing splats, but only at
the expense of greatly increasing the probability of counter wrap, as
in within milliseconds on 32-bit systems and within minutes on 64-bit
systems.
This commit is in preparation for polled expedited grace periods.
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit switches the existing polled grace-period APIs to use a
new ->gp_seq_polled counter in the rcu_state structure. An additional
->gp_seq_polled_snap counter in that same structure allows the normal
grace period kthread to interact properly with the !SMP !PREEMPT fastpath
through synchronize_rcu(). The first of the two to note the end of a
given grace period will make knowledge of this transition available to
the polled API.
This commit is in preparation for polled expedited grace periods.
[ paulmck: Fix use of rcu_state.gp_seq_polled to start normal grace period. ]
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Callbacks are invoked in RCU kthreads when calbacks are offloaded
(rcu_nocbs boot parameter) or when RCU's softirq handler has been
offloaded to rcuc kthreads (use_softirq==0). The current code allows
for the rcu_nocbs case but not the use_softirq case. This commit adds
support for the use_softirq case.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
NOCB rdp's are part of a group whose list is iterated by the
corresponding rdp leader.
This list is RCU traversed because an rdp can be either added or
deleted concurrently. Upon addition, a new iteration to the list after
a synchronization point (a pair of LOCK/UNLOCK ->nocb_gp_lock) is forced
to make sure:
1) we didn't miss a new element added in the middle of an iteration
2) we didn't ignore a whole subset of the list due to an element being
quickly deleted and then re-added.
3) we prevent from probably other surprises...
Although this layout is expected to be safe, it doesn't help anybody
to sleep well.
Simplify instead the nocb state toggling with moving the list
modification from the nocb (de-)offloading workqueue to the rcuog
kthreads instead.
Whenever the rdp leader is expected to (re-)set the SEGCBLIST_KTHREAD_GP
flag of a target rdp, the latter is queued so that the leader handles
the flag flip along with adding or deleting the target rdp to the list
to iterate. This way the list modification and iteration happen from the
same kthread and those operations can't race altogether.
As a bonus, the flags for each rdp don't need to be checked locklessly
before each iteration, which is one less opportunity to produce
nightmares.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Move the core RCU eqs/dynticks functions to context tracking so that
we can later merge all that code within context tracking.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
The RCU eqs tracking is going to be performed by the context tracking
subsystem. The related nesting counters thus need to be moved to the
context tracking structure.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
The RCU eqs tracking is going to be performed by the context tracking
subsystem. The related nesting counters thus need to be moved to the
context tracking structure.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
In order to prepare for merging RCU dynticks counter into the context
tracking state, move the rcu_data's dynticks field to the context
tracking structure. It will later be mixed within the context tracking
state itself.
[ paulmck: Move enum ctx_state into global scope. ]
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
A report of a 12-jiffy normal RCU CPU stall warning raises interesting
questions about the nature of time on the offending system. This commit
instruments rcu_sched_clock_irq(), which is RCU's hook into the
scheduling-clock interrupt, checking for the jiffies counter going
backwards.
Reported-by: Saravanan D <sarvanand@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_spawn_gp_kthread() function is called as an early initcall, which
means that SMP initialization hasn't happened yet and only the boot CPU is
online. Therefore, create only the NOCB kthreads related to the boot CPU.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_spawn_gp_kthread() function is called as an early initcall,
which means that SMP initialization hasn't happened yet and only the
boot CPU is online. Therefore, create only the boost kthread for the
leaf node of the boot CPU.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the RCU nocb initialization witness within rcu_state
to consolidate RCU's global state.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
As we handle parallel CPU bringup, we will need to take care to avoid
spawning multiple boost threads, or race conditions when setting their
affinity. Spotted by Paul McKenney.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit removes the cpus_read_lock() and cpus_read_unlock() calls
from rcu_barrier(), thus allowing CPUs to come and go during the course
of rcu_barrier() execution. Posting of the ->barrier_head callbacks does
synchronize with portions of RCU's CPU-hotplug notifiers, but these locks
are held for short time periods on both sides. Thus, full CPU-hotplug
operations could both start and finish during the execution of a given
rcu_barrier() invocation.
Additional synchronization is provided by a global ->barrier_lock.
Since the ->barrier_lock is only used during rcu_barrier() execution and
during onlining/offlining a CPU, the contention for this lock should
be low. It might be tempting to make use of a per-CPU lock just on
general principles, but straightforward attempts to do this have the
problems shown below.
Initial state: 3 CPUs present, CPU 0 and CPU1 do not have
any callback and CPU2 has callbacks.
1. CPU0 calls rcu_barrier().
2. CPU1 starts offlining for CPU2. CPU1 calls
rcutree_migrate_callbacks(). rcu_barrier_entrain() is called
from rcutree_migrate_callbacks(), with CPU2's rdp->barrier_lock.
It does not entrain ->barrier_head for CPU2, as rcu_barrier()
on CPU0 hasn't started the barrier sequence (by calling
rcu_seq_start(&rcu_state.barrier_sequence)) yet.
3. CPU0 starts new barrier sequence. It iterates over
CPU0 and CPU1, after acquiring their per-cpu ->barrier_lock
and finds 0 segcblist length. It updates ->barrier_seq_snap
for CPU0 and CPU1 and continues loop iteration to CPU2.
for_each_possible_cpu(cpu) {
raw_spin_lock_irqsave(&rdp->barrier_lock, flags);
if (!rcu_segcblist_n_cbs(&rdp->cblist)) {
WRITE_ONCE(rdp->barrier_seq_snap, gseq);
raw_spin_unlock_irqrestore(&rdp->barrier_lock, flags);
rcu_barrier_trace(TPS("NQ"), cpu, rcu_state.barrier_sequence);
continue;
}
4. rcutree_migrate_callbacks() completes execution on CPU1.
Segcblist len for CPU2 becomes 0.
5. The loop iteration on CPU0, checks rcu_segcblist_n_cbs(&rdp->cblist)
for CPU2 and completes the loop iteration after setting
->barrier_seq_snap.
6. As there isn't any ->barrier_head callback entrained; at
this point, rcu_barrier() in CPU0 returns.
7. The callbacks, which migrated from CPU2 to CPU1, execute.
Straightforward per-CPU locking is also subject to the following race
condition noted by Boqun Feng:
1. CPU0 calls rcu_barrier(), starting a new barrier sequence by invoking
rcu_seq_start() and init_completion(), but does not yet initialize
rcu_state.barrier_cpu_count.
2. CPU1 starts offlining for CPU2, calling rcutree_migrate_callbacks(),
which in turn calls rcu_barrier_entrain() holding CPU2's.
rdp->barrier_lock. It then entrains ->barrier_head for CPU2
and atomically increments rcu_state.barrier_cpu_count, which is
unfortunately not yet initialized to the value 2.
3. The just-entrained RCU callback is invoked. It atomically
decrements rcu_state.barrier_cpu_count and sees that it is
now zero. This callback therefore invokes complete().
4. CPU0 continues executing rcu_barrier(), but is not blocked
by its call to wait_for_completion(). This results in rcu_barrier()
returning before all pre-existing callbacks have been invoked,
which is a bug.
Therefore, synchronization is provided by rcu_state.barrier_lock,
which is also held across the initialization sequence, especially the
rcu_seq_start() and the atomic_set() that sets rcu_state.barrier_cpu_count
to the value 2. In addition, this lock is held when entraining the
rcu_barrier() callback, when deciding whether or not a CPU has callbacks
that rcu_barrier() must wait on, when setting the ->qsmaskinitnext for
incoming CPUs, and when migrating callbacks from a CPU that is going
offline.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit reworks rcu_barrier() and callback-migration logic to
permit allowing rcu_barrier() to run concurrently with CPU-hotplug
operations. The key trick is for callback migration to check to see if
an rcu_barrier() is in flight, and, if so, enqueue the ->barrier_head
callback on its behalf.
This commit adds synchronization with RCU's CPU-hotplug notifiers. Taken
together, this will permit a later commit to remove the cpus_read_lock()
and cpus_read_unlock() calls from rcu_barrier().
[ paulmck: Updated per kbuild test robot feedback. ]
[ paulmck: Updated per reviews session with Neeraj, Frederic, Uladzislau, and Boqun. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If we allow architectures to bring APs online in parallel, then we end
up requiring rcu_cpu_starting() to be reentrant. But currently, the
manipulation of rnp->ofl_seq is not thread-safe.
However, rnp->ofl_seq is also fairly much pointless anyway since both
rcu_cpu_starting() and rcu_report_dead() hold rcu_state.ofl_lock for
fairly much the whole time that rnp->ofl_seq is set to an odd number
to indicate that an operation is in progress.
So drop rnp->ofl_seq completely, and use only rcu_state.ofl_lock.
This has a couple of minor complexities: lockdep will complain when we
take rcu_state.ofl_lock, and currently accepts the 'excuse' of having
an odd value in rnp->ofl_seq. So switch it to an arch_spinlock_t to
avoid that false positive complaint. Since we're killing rnp->ofl_seq
of course that 'excuse' has to be changed too, so make it check for
arch_spin_is_locked(rcu_state.ofl_lock).
There's no arch_spin_lock_irqsave() so we have to manually save and
restore local interrupts around the locking.
At Paul's request based on Neeraj's analysis, make rcu_gp_init not just
wait but *exclude* any CPU online/offline activity, which was fairly
much true already by virtue of it holding rcu_state.ofl_lock.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When the rcutree.use_softirq kernel boot parameter is set to zero, all
RCU_SOFTIRQ processing is carried out by the per-CPU rcuc kthreads.
If these kthreads are being starved, quiescent states will not be
reported, which in turn means that the grace period will not end, which
can in turn trigger RCU CPU stall warnings. This commit therefore dumps
stack traces of stalled CPUs' rcuc kthreads, which can help identify
what is preventing those kthreads from running.
Suggested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Reviewed-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When multiple CPUs in the same nocb gp/cb group concurrently
come online, they might try to concurrently create the same
rcuog kthread. Fix this by using nocb gp CPU's spawn mutex to
provide mutual exclusion for the rcuog kthread creation code.
[ paulmck: Whitespace fixes per kernel test robot feedback. ]
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The nocb_gp_wait() function iterates over all CPUs in its group,
including even those CPUs that have been de-offloaded. This is of
course suboptimal, especially if none of the CPUs within the group are
currently offloaded. This will become even more of a problem once a
nocb kthread is created for all possible CPUs.
Therefore use a standard double linked list to link all the offloaded
rcu_data structures and safely add or delete these structure as we
offload or de-offload them, respectively.
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
rcu_nocb_lock_irqsave() can be preempted between the call to
rcu_segcblist_is_offloaded() and the actual locking. This matters now
that rcu_core() is preemptible on PREEMPT_RT and the (de-)offloading
process can interrupt the softirq or the rcuc kthread.
As a result we may locklessly call into code that requires nocb locking.
In practice this is a problem while we accelerate callbacks on rcu_core().
Simply disabling interrupts before (instead of after) checking the NOCB
offload state fixes the issue.
Reported-and-tested-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Having two fields for the same purpose with subtle differences on
different RCU flavours is confusing, especially when both fields always
exist on both RCU flavours.
Fortunately, it is now safe for preemptible RCU to rely on the rcu_data
structure's ->cpu_no_qs.b.exp field, just like non-preemptible RCU.
This commit therefore removes the ad-hoc ->exp_deferred_qs field.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
All of the uses of CONFIG_RCU_FAST_NO_HZ=y that I have seen involve
systems with RCU callbacks offloaded. In this situation, all that this
Kconfig option does is slow down idle entry/exit with an additional
allways-taken early exit. If this is the only use case, then this
Kconfig option nothing but an attractive nuisance that needs to go away.
This commit therefore removes the RCU_FAST_NO_HZ Kconfig option.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Fix ~12 single-word typos in RCU code comments.
[ paulmck: Apply feedback from Randy Dunlap. ]
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that ->nocb_timer and ->nocb_bypass_timer have become quite similar,
this commit merges them together. A new RCU_NOCB_WAKE_BYPASS wake level
is introduced. As a result, timers perform all kinds of deferred wake
ups but other deferred wakeup callsites only handle non-bypass wakeups
in order not to wake up rcuo too early.
The timer also unconditionally executes a full barrier so as to order
timer_pending() and callback enqueue although the path performing
RCU_NOCB_WAKE_FORCE that makes use of it is debatable. It should also
test against the rdp leader instead of the current rdp.
This unconditional full barrier shouldn't bring visible overhead since
these timers almost never fire.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tuning the deferred wakeup level must be done from a safe wakeup
point. Currently those sites are:
* ->nocb_timer
* user/idle/guest entry
* CPU down
* softirq/rcuc
All of these sites perform the wake up for both RCU_NOCB_WAKE and
RCU_NOCB_WAKE_FORCE.
In order to merge ->nocb_timer and ->nocb_bypass_timer together, we plan
to add a new RCU_NOCB_WAKE_BYPASS that really should be deferred until
a timer fires so that we don't wake up the NOCB-gp kthread too early.
To prepare for that, this commit specifies the per-callsite wakeup
level/limit.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
[ paulmck: Fix non-NOCB rcu_nocb_need_deferred_wakeup() definition. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When any CPU comes online, it checks to see if an RCU-boost kthread has
already been created for that CPU's leaf rcu_node structure, and if
not, it creates one. Unfortunately, it also verifies that this leaf
rcu_node structure actually has at least one online CPU, and if not,
it declines to create the kthread. Although this behavior makes sense
during early boot, especially on systems that claim far more CPUs than
they actually have, it makes no sense for the first CPU to come online
for a given rcu_node structure. There is no point in checking because
we know there is a CPU on its way in.
The problem is that timing differences can cause this incoming CPU to not
yet be reflected in the various bit masks even at rcutree_online_cpu()
time, and there is no chance at rcutree_prepare_cpu() time. Plus it
would be better to create the RCU-boost kthread at rcutree_prepare_cpu()
to handle the case where the CPU is involved in an RCU priority inversion
very shortly after it comes online.
This commit therefore moves the checking to rcu_prepare_kthreads(), which
is called only at early boot, when the check is appropriate. In addition,
it makes rcutree_prepare_cpu() invoke rcu_spawn_one_boost_kthread(), which
no longer does any checking for online CPUs.
With this change, RCU priority boosting tests now pass for short rcutorture
runs, even with single-CPU leaf rcu_node structures.
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Scott Wood <swood@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds each rcu_node structure's ->qsmask and "bBEG" output
indicating whether: (1) There is a boost kthread, (2) A reader needs
to be (or is in the process of being) boosted, (3) A reader is blocking
an expedited grace period, and (4) A reader is blocking a normal grace
period. This helps diagnose RCU priority boosting failures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently each CPU has its own ->nocb_timer queued when the nocb_gp
wakeup must be deferred. This approach has many drawbacks, compared to
a solution based on a single timer per NOCB group:
* There are a lot of timers to maintain.
* The per-rdp ->nocb_lock must be held to queue and cancel the timer
and this lock can already be heavily contended.
* One timer firing doesn't cancel the other timers in the same group:
- These other timers can thus cause spurious wakeups
- Each rdp that queued a timer must lock both ->nocb_lock and then
->nocb_gp_lock upon exit from the kernel to idle/user/guest mode.
* We can't cancel all of them if we detect an unflushed bypass in
nocb_gp_wait(). In fact currently we only ever cancel the ->nocb_timer
of the leader group.
* The leader group's nocb_timer is cancelled without locking ->nocb_lock
in nocb_gp_wait(). This currently appears to be safe but is an
accident waiting to happen.
* Since the timer acquires ->nocb_lock, it requires extra care in the
NOCB (de-)offloading process, requiring that it be either enabled or
disabled and then flushed.
This commit instead uses the rcuog kthread's CPU's ->nocb_timer instead.
It is protected by nocb_gp_lock, which is _way_ less contended and
remains so even after this change. As a matter of fact, the nocb_timer
almost never fires and the deferred wakeup is mostly carried out upon
idle/user/guest entry. Now the early check performed at this point in
do_nocb_deferred_wakeup() is done on rdp_gp->nocb_defer_wakeup, which
is of course racy. However, this raciness is harmless because we only
need the guarantee that the timer is queued if we were the last one to
queue it. Any other situation (another CPU has queued it and we either
see it or not) is fine.
This solves all the issues listed above.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ NOTE: unfortunately this tree had to be freshly rebased today,
it's a same-content tree of 82891be90f3c (-next published)
merged with v5.11.
The main reason for the rebase was an authorship misattribution
problem with a new commit, which we noticed in the last minute,
and which we didn't want to be merged upstream. The offending
commit was deep in the tree, and dependent commits had to be
rebased as well. ]
- Core scheduler updates:
- Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
preempt=none/voluntary/full boot options (default: full),
to allow distros to build a PREEMPT kernel but fall back to
close to PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling
behavior via a boot time selection.
There's also the /debug/sched_debug switch to do this runtime.
This feature is implemented via runtime patching (a new variant of static calls).
The scope of the runtime patching can be best reviewed by looking
at the sched_dynamic_update() function in kernel/sched/core.c.
( Note that the dynamic none/voluntary mode isn't 100% identical,
for example preempt-RCU is available in all cases, plus the
preempt count is maintained in all models, which has runtime
overhead even with the code patching. )
The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast majority
of distributions, are supposed to be unaffected.
- Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
was found via rcutorture triggering a hang. The bug is that
rcu_idle_enter() may wake up a NOCB kthread, but this happens after
the last generic need_resched() check. Some cpuidle drivers fix it
by chance but many others don't.
In true 2020 fashion the original bug fix has grown into a 5-patch
scheduler/RCU fix series plus another 16 RCU patches to address
the underlying issue of missed preemption events. These are the
initial fixes that should fix current incarnations of the bug.
- Clean up rbtree usage in the scheduler, by providing & using the following
consistent set of rbtree APIs:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
- Improve the SMP/NUMA load-balancer: scan for an idle sibling in a single pass.
This is a 4-commit series where each commit improves one aspect of the idle
sibling scan logic.
- Improve the cpufreq cooling driver by getting the effective CPU utilization
metrics from the scheduler
- Improve the fair scheduler's active load-balancing logic by reducing the number
of active LB attempts & lengthen the load-balancing interval. This improves
stress-ng mmapfork performance.
- Fix CFS's estimated utilization (util_est) calculation bug that can result in
too high utilization values
- Misc updates & fixes:
- Fix the HRTICK reprogramming & optimization feature
- Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code
- Reduce dl_add_task_root_domain() overhead
- Fix uprobes refcount bug
- Process pending softirqs in flush_smp_call_function_from_idle()
- Clean up task priority related defines, remove *USER_*PRIO and
USER_PRIO()
- Simplify the sched_init_numa() deduplication sort
- Documentation updates
- Fix EAS bug in update_misfit_status(), which degraded the quality
of energy-balancing
- Smaller cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pyaG
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler updates:
- Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
preempt=none/voluntary/full boot options (default: full), to allow
distros to build a PREEMPT kernel but fall back to close to
PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling behavior via
a boot time selection.
There's also the /debug/sched_debug switch to do this runtime.
This feature is implemented via runtime patching (a new variant of
static calls).
The scope of the runtime patching can be best reviewed by looking
at the sched_dynamic_update() function in kernel/sched/core.c.
( Note that the dynamic none/voluntary mode isn't 100% identical,
for example preempt-RCU is available in all cases, plus the
preempt count is maintained in all models, which has runtime
overhead even with the code patching. )
The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast
majority of distributions, are supposed to be unaffected.
- Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
was found via rcutorture triggering a hang. The bug is that
rcu_idle_enter() may wake up a NOCB kthread, but this happens after
the last generic need_resched() check. Some cpuidle drivers fix it
by chance but many others don't.
In true 2020 fashion the original bug fix has grown into a 5-patch
scheduler/RCU fix series plus another 16 RCU patches to address the
underlying issue of missed preemption events. These are the initial
fixes that should fix current incarnations of the bug.
- Clean up rbtree usage in the scheduler, by providing & using the
following consistent set of rbtree APIs:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
- Improve the SMP/NUMA load-balancer: scan for an idle sibling in a
single pass. This is a 4-commit series where each commit improves
one aspect of the idle sibling scan logic.
- Improve the cpufreq cooling driver by getting the effective CPU
utilization metrics from the scheduler
- Improve the fair scheduler's active load-balancing logic by
reducing the number of active LB attempts & lengthen the
load-balancing interval. This improves stress-ng mmapfork
performance.
- Fix CFS's estimated utilization (util_est) calculation bug that can
result in too high utilization values
Misc updates & fixes:
- Fix the HRTICK reprogramming & optimization feature
- Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code
- Reduce dl_add_task_root_domain() overhead
- Fix uprobes refcount bug
- Process pending softirqs in flush_smp_call_function_from_idle()
- Clean up task priority related defines, remove *USER_*PRIO and
USER_PRIO()
- Simplify the sched_init_numa() deduplication sort
- Documentation updates
- Fix EAS bug in update_misfit_status(), which degraded the quality
of energy-balancing
- Smaller cleanups"
* tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
sched,x86: Allow !PREEMPT_DYNAMIC
entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point
entry: Explicitly flush pending rcuog wakeup before last rescheduling point
rcu/nocb: Trigger self-IPI on late deferred wake up before user resume
rcu/nocb: Perform deferred wake up before last idle's need_resched() check
rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers
sched/features: Distinguish between NORMAL and DEADLINE hrtick
sched/features: Fix hrtick reprogramming
sched/deadline: Reduce rq lock contention in dl_add_task_root_domain()
uprobes: (Re)add missing get_uprobe() in __find_uprobe()
smp: Process pending softirqs in flush_smp_call_function_from_idle()
sched: Harden PREEMPT_DYNAMIC
static_call: Allow module use without exposing static_call_key
sched: Add /debug/sched_preempt
preempt/dynamic: Support dynamic preempt with preempt= boot option
preempt/dynamic: Provide irqentry_exit_cond_resched() static call
preempt/dynamic: Provide preempt_schedule[_notrace]() static calls
preempt/dynamic: Provide cond_resched() and might_resched() static calls
preempt: Introduce CONFIG_PREEMPT_DYNAMIC
static_call: Provide DEFINE_STATIC_CALL_RET0()
...
Entering RCU idle mode may cause a deferred wake up of an RCU NOCB_GP
kthread (rcuog) to be serviced.
Unfortunately the call to rcu_user_enter() is already past the last
rescheduling opportunity before we resume to userspace or to guest mode.
We may escape there with the woken task ignored.
The ultimate resort to fix every callsites is to trigger a self-IPI
(nohz_full depends on arch to implement arch_irq_work_raise()) that will
trigger a reschedule on IRQ tail or guest exit.
Eventually every site that want a saner treatment will need to carefully
place a call to rcu_nocb_flush_deferred_wakeup() before the last explicit
need_resched() check upon resume.
Fixes: 96d3fd0d31 (rcu: Break call_rcu() deadlock involving scheduler and perf)
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210131230548.32970-4-frederic@kernel.org
This commit ensures that the nocb timer is shut down before reaching the
final de-offloaded state. The key goal is to prevent the timer handler
from manipulating the callbacks without the protection of the nocb locks.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
To de-offload callback processing back onto a CPU, it is necessary to
clear SEGCBLIST_OFFLOAD and notify the nocb CB kthread, which will then
clear its own bit flag and go to sleep to stop handling callbacks. This
commit makes that change. It will also be necessary to notify the nocb
GP kthread in this same way, which is the subject of a follow-on commit.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
[ paulmck: Add export per kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_cpu_starting() and rcu_report_dead() functions transition the
current CPU between online and offline state from an RCU perspective.
Unfortunately, this means that the rcu_cpu_starting() function's lock
acquisition and the rcu_report_dead() function's lock releases happen
while the CPU is offline from an RCU perspective, which can result
in lockdep-RCU splats about using RCU from an offline CPU. And this
situation can also result in too-short grace periods, especially in
guest OSes that are subject to vCPU preemption.
This commit therefore uses sequence-count-like synchronization to forgive
use of RCU while RCU thinks a CPU is offline across the full extent of
the rcu_cpu_starting() and rcu_report_dead() function's lock acquisitions
and releases.
One approach would have been to use the actual sequence-count primitives
provided by the Linux kernel. Unfortunately, the resulting code looks
completely broken and wrong, and is likely to result in patches that
break RCU in an attempt to address this appearance of broken wrongness.
Plus there is no net savings in lines of code, given the additional
explicit memory barriers required.
Therefore, this sequence count is instead implemented by a new ->ofl_seq
field in the rcu_node structure. If this counter's value is an odd
number, RCU forgives RCU read-side critical sections on other CPUs covered
by the same rcu_node structure, even if those CPUs are offline from
an RCU perspective. In addition, if a given leaf rcu_node structure's
->ofl_seq counter value is an odd number, rcu_gp_init() delays starting
the grace period until that counter value changes.
[ paulmck: Apply Peter Zijlstra feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, for CONFIG_PREEMPTION=n kernels, rcu_blocking_is_gp() uses
num_online_cpus() to determine whether there is only one CPU online. When
there is only a single CPU online, the simple fact that synchronize_rcu()
could be legally called implies that a full grace period has elapsed.
Therefore, in the single-CPU case, synchronize_rcu() simply returns
immediately. Unfortunately, num_online_cpus() is unreliable while a
CPU-hotplug operation is transitioning to or from single-CPU operation
because:
1. num_online_cpus() uses atomic_read(&__num_online_cpus) to
locklessly sample the number of online CPUs. The hotplug locks
are not held, which means that an incoming CPU can concurrently
update this count. This in turn means that an RCU read-side
critical section on the incoming CPU might observe updates
prior to the grace period, but also that this critical section
might extend beyond the end of the optimized synchronize_rcu().
This breaks RCU's fundamental guarantee.
2. In addition, num_online_cpus() does no ordering, thus providing
another way that RCU's fundamental guarantee can be broken by
the current code.
3. The most probable failure mode happens on outgoing CPUs.
The outgoing CPU updates the count of online CPUs in the
CPUHP_TEARDOWN_CPU stop-machine handler, which is fine in
and of itself due to preemption being disabled at the call
to num_online_cpus(). Unfortunately, after that stop-machine
handler returns, the CPU takes one last trip through the
scheduler (which has RCU readers) and, after the resulting
context switch, one final dive into the idle loop. During this
time, RCU needs to keep track of two CPUs, but num_online_cpus()
will say that there is only one, which in turn means that the
surviving CPU will incorrectly ignore the outgoing CPU's RCU
read-side critical sections.
This problem is illustrated by the following litmus test in which P0()
corresponds to synchronize_rcu() and P1() corresponds to the incoming CPU.
The herd7 tool confirms that the "exists" clause can be satisfied,
thus demonstrating that this breakage can happen according to the Linux
kernel memory model.
{
int x = 0;
atomic_t numonline = ATOMIC_INIT(1);
}
P0(int *x, atomic_t *numonline)
{
int r0;
WRITE_ONCE(*x, 1);
r0 = atomic_read(numonline);
if (r0 == 1) {
smp_mb();
} else {
synchronize_rcu();
}
WRITE_ONCE(*x, 2);
}
P1(int *x, atomic_t *numonline)
{
int r0; int r1;
atomic_inc(numonline);
smp_mb();
rcu_read_lock();
r0 = READ_ONCE(*x);
smp_rmb();
r1 = READ_ONCE(*x);
rcu_read_unlock();
}
locations [x;numonline;]
exists (1:r0=0 /\ 1:r1=2)
It is important to note that these problems arise only when the system
is transitioning to or from single-CPU operation.
One solution would be to hold the CPU-hotplug locks while sampling
num_online_cpus(), which was in fact the intent of the (redundant)
preempt_disable() and preempt_enable() surrounding this call to
num_online_cpus(). Actually blocking CPU hotplug would not only result
in excessive overhead, but would also unnecessarily impede CPU-hotplug
operations.
This commit therefore follows long-standing RCU tradition by maintaining
a separate RCU-specific set of CPU-hotplug books.
This separate set of books is implemented by a new ->n_online_cpus field
in the rcu_state structure that maintains RCU's count of the online CPUs.
This count is incremented early in the CPU-online process, so that
the critical transition away from single-CPU operation will occur when
there is only a single CPU. Similarly for the critical transition to
single-CPU operation, the counter is decremented late in the CPU-offline
process, again while there is only a single CPU. Because there is only
ever a single CPU when the ->n_online_cpus field undergoes the critical
1->2 and 2->1 transitions, full memory ordering and mutual exclusion is
provided implicitly and, better yet, for free.
In the case where the CPU is coming online, nothing will happen until
the current CPU helps it come online. Therefore, the new CPU will see
all accesses prior to the optimized grace period, which means that RCU
does not need to further delay this new CPU. In the case where the CPU
is going offline, the outgoing CPU is totally out of the picture before
the optimized grace period starts, which means that this outgoing CPU
cannot see any of the accesses following that grace period. Again,
RCU needs no further interaction with the outgoing CPU.
This does mean that synchronize_rcu() will unnecessarily do a few grace
periods the hard way just before the second CPU comes online and just
after the second-to-last CPU goes offline, but it is not worth optimizing
this uncommon case.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
A kernel built with CONFIG_RCU_STRICT_GRACE_PERIOD=y needs a quiescent
state to appear very shortly after a CPU has noticed a new grace period.
Placing an RCU reader immediately after this point is ineffective because
this normally happens in softirq context, which acts as a big RCU reader.
This commit therefore introduces a new per-CPU work_struct, which is
used at the end of rcu_core() processing to schedule an RCU read-side
critical section from within a clean environment.
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When the rcu_cpu_started per-CPU variable was added by commit
f64c6013a2 ("rcu/x86: Provide early rcu_cpu_starting() callback"),
there were multiple sets of per-CPU rcu_data structures. Therefore, the
rcu_cpu_started flag was added as a separate per-CPU variable. But now
there is only one set of per-CPU rcu_data structures, so this commit
moves rcu_cpu_started to a new ->cpu_started field in that structure.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The ->grpnum field in the rcu_node structure contains the bit position
in this structure's parent's bitmasks, which is not the CPU number.
This commit therefore adjusts this field's comment accordingly.
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The ->grplo and ->grphi fields store the lowest and highest CPU number
covered by to a rcu_node structure, which is not the group number.
This commit therefore adjusts these fields' comments to match reality.
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because gp_max is protected by root rcu_node's lock, this commit moves
the gp_max definition to the region of the rcu_node structure containing
fields protected by this lock.
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Paul E. McKenney
Zqiang
Frederic Weisbecker
Kalesh Singh
David Woodhouse
Neeraj Upadhyay
Ingo Molnar
Linus Torvalds
Neeraj Upadhyay
Wei Yang