Граф коммитов

31 Коммитов

Автор SHA1 Сообщение Дата
Andrea Merello ab9d343da3 iio: event_monitor: add pitch, yaw and roll modifiers
Following the introduction of pitch, yaw and roll IIO modifiers, update the
event_monitor tool accordingly.

Signed-off-by: Andrea Merello <andrea.merello@iit.it>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220907132205.28021-7-andrea.merello@iit.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21 18:42:55 +01:00
Andrea Merello 4db63c8546 iio: event_monitor: add linear acceleration modifiers
Following the introduction of IIO linear acceleration modifiers, update the
event_monitor tool accordingly.

Signed-off-by: Andrea Merello <andrea.merello@iit.it>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220907132205.28021-4-andrea.merello@iit.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21 18:42:55 +01:00
Jagath Jog J 835e699ef8 iio: Add new event type gesture and use direction for single and double tap
Add new event type for tap called gesture and the direction can be used
to differentiate single and double tap. This may be used by accelerometer
sensors to express single and double tap events. For directional tap,
modifiers like IIO_MOD_(X/Y/Z) can be used along with singletap and
doubletap direction.

Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
Link: https://lore.kernel.org/r/20220831063117.4141-2-jagathjog1996@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-05 18:08:42 +01:00
Cosmin Tanislav a1a5cfe70c iio: introduce mag_referenced
Some accelerometers that support activity and inactivity
events also support a referenced mode, in which the
gravitational acceleration is taken as a point of
reference before comparing the acceleration to the
specified activity and inactivity magnitude.

For example, in the case of the ADXL367, for activity
detection, the formula is:

abs(acceleration - reference) > magnitude

Add a new event type that makes this behavior clear.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20220214073810.781016-2-cosmin.tanislav@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-21 19:33:05 +00:00
Zach DeCook c054fe9936 iio: event_monitor: Flush output on event
By flushing the output, iio_event_monitor can be more useful to programs
chained along with it.

  iio_event_monitor stk3310 | awk '/rising/{system("my_unlockscreen.sh")} /falling/{system("my_lockscreen.sh")}'

Without this flush, the above example would buffer a number of events,
then after a while run the lock/unlock scripts several times.

Signed-off-by: Zach DeCook <zachdecook@librem.one>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-16 12:20:35 +00:00
Linus Walleij e1d392dc88 iio: event_monitor: Enable events before monitoring
After some painful sessions with a driver that register an
enable/disable sysfs knob (gp2ap002) and manually going
in and enabling the event before monitoring it:

  cd /sys/bus/iio/devices/iio\:device2/events
  # ls
  in_proximity_thresh_either_en
  # echo 1 > in_proximity_thresh_either_en

I realized that it's better if the iio_event_monitor is
smart enough to enable all events by itself and disable them
after use, if passed the -a flag familiar from the
iio_generic_buffer tool.

Auto-enabling events depend on the hardware being able
to handle all events at the same time which isn't
necessarily the case, so a command line option is required
for this.

Cc: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210319135301.542911-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-25 19:13:52 +00:00
Matt Ranostay 4ffa22fd22 iio: add IIO_MOD_O2 modifier
Add modifier IIO_MOD_O2 for O2 concentration reporting

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-08-22 10:53:12 +01:00
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Andreas Brauchli b170f7d484 iio: Add modifiers for ethanol and H2 gases
Add ethanol and H2 gas modifiers:
* IIO_MOD_ETHANOL
* IIO_MOD_H2

Signed-off-by: Andreas Brauchli <andreas.brauchli@sensirion.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:58 +00:00
Tomasz Duszynski 17abc9ec68 iio: add IIO_MASSCONCENTRATION channel type
Measuring particulate matter in ug / m3 (micro-grams per cubic meter)
is de facto standard. Existing air quality sensors usually follow
this convention and are capable of returning measurements using
this unit.

IIO currently does not offer suitable channel type for this
type of measurements hence this patch adds this.

In addition, extra modifiers are introduced used for distinguishing
between fine pm1, pm2p5 and coarse pm4, pm10 particle measurements, i.e
IIO_MOD_PM1, IIO_MOD_PM25 and IIO_MOD_PM4, IIO_MOD_PM10.

pmX consists of particles with aerodynamic diameter less or equal to
X micrometers.

Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:57 +00:00
Maxime Roussin-Bélanger c0e4e0fd95 iio: Add modifier for DUV light
Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-23 19:18:10 +01:00
Mathieu Othacehe c73314e6eb iio: Add channel for Phase
Add new channel type support for phase.

This channel may be used by Time-of-flight sensors to express the
phase difference between emitted and received signals. Those sensor
will then use the phase shift of return signals to approximate the
distance to objects.

Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-21 15:28:14 +01:00
Eugen Hristev 3055a6cfa0 iio: Add channel for Position Relative
Add new channel type for relative position on a pad.

These type of analog sensor offers the position of a pen
on a touchpad, and is represented as a voltage, which can be
converted to a position on X and Y axis on the pad.
The channel will hand the relative position on the pad in both directions.

The channel can then be consumed by a touchscreen driver or
read as-is for a raw indication of the touchpen on a touchpad.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-10 11:55:15 +01:00
Song Hongyan 571299d099 iio: Add channel for Gravity
Add new channel types support for gravity sensor.

Gravity sensor provides an application-level or physical collection that
identifies a device that measures exclusively the force of Earth's
gravity along any number of axes.

More information can be found in:
http://www.usb.org/developers/hidpage/HUTRR59_-_Usages_for_Wearables.pdf

Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-05 13:02:25 +00:00
Peter Meerwald-Stadler d409404cf6 iio: Add channel for UV index
UV index indicating strength of sunburn-producing ultraviolet (UV) radiation

Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03 11:14:01 +01:00
Peter Meerwald-Stadler 2c5ff1f9a6 iio: Add modifier for UV light
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-03 11:14:00 +01:00
Peter Meerwald-Stadler 6ad515c6d6 tools: iio: Update iio_event_monitor names
add recently added channel types and modifiers

Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-20 10:27:24 +00:00
Linus Walleij 672f93b604 iio: event_monitor: report unsupported events
This makes the event monitor bail out with a helpful error
message if a device does not support events, as a related
fix to iio core now makes it return -ENODEV properly.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16 10:51:25 +01:00
Cristina Opriceana d9abc615ea tools: iio: Send error messages to stderr
This patch indends to make some cleanup and send printf
error messages to stderr. The changes were performed with coccinelle
for failure messages and manual for other cases, such as wrong usage
messages.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-20 18:41:24 +01:00
Cristina Opriceana 37d38e2bcc tools: iio: Remove unnecessary braces
Single statement blocks don’t need braces.
Found with checkpatch.pl.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-20 18:41:22 +01:00
Hartmut Knaack 09a33f0521 tools:iio:iio_event_monitor: check if event is fully read
Check that the read event is of the expected size.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-21 16:20:10 +01:00
Peter Meerwald 30e8326728 tools: iio: Add missing names to iio_event_monitor
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-21 10:46:15 +01:00
Hartmut Knaack 7663a4aac6 tools:iio: adjust coding style
Fix various coding style issues, including:
  * have spaces around operators
  * indentation
  * consolidate parameters in same line
  * required braces
  * adjust/drop comments
  * multiline comment style
  * delete unnecessary empty lines
  * add empty lines to visualize logial code blocks
  * typos

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-13 18:49:43 +01:00
Hartmut Knaack 916e89e4b7 tools:iio:iio_event_monitor: refactor events output
Refactor the code in print_event() to reduce code duplication and better
reflect that the type is output unconditionally, as well as cascade the
dependency of the diff-channel. Saves a few lines of code, as well.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-01 08:34:48 +01:00
Hartmut Knaack 0e79987817 tools:iio: return values directly
Return directly, if no common cleanup is required.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-01 08:33:47 +01:00
Hartmut Knaack 963f54cef2 tools:iio:iio_event_monitor: add error handling
Add error handling to calls which can indicate a major problem by
returning an error code.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 19:25:12 +01:00
Hartmut Knaack e9e45b43b8 tools:iio: catch errors in string allocation
This patch catches errors in string allocation in generic_buffer.c,
iio_event_monitor.c, iio_utils.c and lsiio.c.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 19:21:10 +01:00
Hartmut Knaack 5fdb8c6127 tools:iio:iio_event_monitor: save right errno
Move up error handling code to preserve the errno coming from ioctl(),
before it may be changed by close().

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 17:34:05 +01:00
Hartmut Knaack 2b6a6e67af tools:iio: save errno first
The man-page of errno states, that errno should be saved before doing any
library call, as that call may have changed the value of errno. So, when
encountering any error, save errno first.
This patch affects generic_buffer.c, iio_event_monitor.c and iio_utils.c.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-31 17:32:44 +01:00
Roberta Dobrescu 976d9ab112 tools: iio: Define _GNU_SOURCE in Makefile
Definition of _GNU_SOURCE is needed to get rid of some warnings, such
as:
warning: implicit declaration of function `asprintf'.

generic_buffer.c and iio_event_monitor.c define _GNU_SOURCE,
but it is also needed in lsiio.c and iio_utils.c. For this reason,
this patch adds the definition in Makefile and removes it from where
it already exists.

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-09 17:17:26 +00:00
Roberta Dobrescu 817020cfb3 iio: Move iio userspace applications out of staging
This patch moves iio userspace applications out of staging, to tools/iio/
and adds a Makefile in order to compile them easily. It also adds tools/iio/
to MAINTAINERS file.

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-09 17:16:08 +00:00